def dec_regimes():
"""Single ZC sequence with Decimation"""
p = lib.SyncParams()
p.zc_len = 73
p.plen = 61
p.rolloff = 0.2
#p.f_samp = 4e6
#p.f_symb = 1e6
p.f_symb = 30.72e6
p.f_samp = p.f_symb*4
p.repeat = 1
p.spacing_factor = 1 # CHANGE TO TWO!
p.power_weight = 2
p.full_sim = True
p.bias_removal = True
p.ma_window = 1 # number of samples to average in the crosscorr i.e. after analog modulation
p.train_type = 'chain' # Type of training sequence
p.crosscorr_type = 'match_decimate'
p.match_decimate_fct = lib.md_clkphase
p.peak_detect = 'wavg'
p.pulse_type = 'rootraisedcosine'
p.central_padding = 0 # As a fraction of zpos length
ctrl = SimControls()
ctrl.steps = 40 # Approx number of emissions per node
ctrl.basephi = 6000 # How many samples between emission
ctrl.display = True # Show stuff in the console
ctrl.keep_intermediate_values = False # Needed to draw graphs
ctrl.nodecount = 20 # Number of nodes
ctrl.static_nodes = 0
ctrl.CFO_step_wait = float('inf') # Use float('inf') to never correct for CFO
ctrl.TO_step_wait = 3
ctrl.max_start_delay = 8 # In factor of basephi
ctrl.theta_bounds = [0.2,0.8] # In units of phi
#ctrl.theta_bounds = [0.48,0.52] # In units of phi
#ctrl.theta_bounds = [0.5,0.5] # In units of phi
#ctrl.theta_bounds = [0,1] # In units of phi
ctrl.deltaf_bound = 3e-2
#ctrl.deltaf_bound = 0
ctrl.rand_init = False
ctrl.epsilon_TO = 0.5
ctrl.non_rand_seed = 11231231 # Only used if rand_init is False
ctrl.noise_power = float('-inf')
#ctrl.noise_power = -101 + 9 # in dbm
ctrl.delay_params = lib.DelayParams(lib.delay_pdf_3gpp_exp)
ctrl.delay_params.taps = 5
ctrl.max_dist_from_origin = 250 # (in meters)
ctrl.delay_params.max_dist_from_origin = 250 # (in meters)
ctrl.delay_params.p_sigma = 500 # Paths sigma
ctrl.half_duplex = False
ctrl.hd_slot0 = 0.3 # in terms of phi
ctrl.hd_slot1 = 0.7 # in terms of phi
ctrl.hd_block_during_emit = True
ctrl.hd_block_extrawidth = 0 # as a factor of offset (see runsim to know what is offset)
ctrl.var_winlen = False
ctrl.vw_minsize = 5 # as a factor of len(p.analog_sig)
ctrl.vw_lothreshold = 0.1 # winlen reduction threshold
ctrl.vw_hithreshold = 0.1 # winlen increase threshold
ctrl.vw_lofactor = 1.5 # winlen reduction factor
ctrl.vw_hifactor = 2 # winlen increase factor
ctrl.prop_correction = False
ctrl.pc_step_wait = 0
#ctrl.pc_b, ctrl.pc_a = lib.hipass_filter4(11, pi/1000, 0.5)
#ctrl.pc_b, ctrl.pc_a = lib.hipass_semicirc_zeros(11, pi/4, 0.1)
#ctrl.pc_b, ctrl.pc_a = lib.hipass_filter4(11, pi/4, 1)
#ctrl.pc_b, ctrl.pc_a = lib.hipass_remez(20)
#ctrl.pc_b, ctrl.pc_a = lib.hipass_butter(8)
#ctrl.pc_b, ctrl.pc_a = lib.hipass_cheby(8)
ctrl.pc_b, ctrl.pc_a = lib.hipass_avg(10)
ctrl.pc_avg_thresh = float('inf') # If std of N previous TOx samples is above this value, then\
ctrl.pc_std_thresh = float(30) # If std of N previous TOx samples is above this value, then\
# no PC is applied (but TOy is still calculated)
ctrl.saveall = True
cdict = {
'nodecount':[x for x in range(10,61,1)]
#'nodecou
}
pdict = {}
#pdict = {'match_decimate_fct':[lib.md_clkphase, lib.md_energy]}
return ctrl, p, cdict, pdict
def dec_sample_theta():
p = lib.SyncParams()
p.zc_len = 32
p.plen = 31
p.rolloff = 0.2
p.f_symb = 30.72e6
p.f_samp = p.f_symb*4
p.repeat = 1
p.spacing_factor = 1
p.power_weight = 2
p.full_sim = True
p.bias_removal = False
p.ma_window = 1 # number of samples to average in the crosscorr i.e. after analog modulation
p.train_type = 'single' # Type of training sequence
p.crosscorr_type = 'match_decimate'
p.match_decimate_fct = lib.downsample
p.peak_detect = 'wavg'
p.pulse_type = 'rootraisedcosine'
p.central_padding = 0 # As a fraction of zpos length
p.scfdma_precode = True
p.scfdma_L = 8
p.scfdma_M = p.zc_len*p.scfdma_L
p.scfdma_sinc_len_factor = p.scfdma_L
ctrl = SimControls()
ctrl.steps = 40 # Approx number of emissions per node
ctrl.basephi = 6000 # How many samples between emission
ctrl.display = True # Show stuff in the console
ctrl.keep_intermediate_values = False # Needed to draw graphs
ctrl.nodecount = 15 # Number of nodes
ctrl.static_nodes = 0
ctrl.CFO_step_wait = float('inf') # Use float('inf') to never correct for CFO
ctrl.TO_step_wait = 5
ctrl.max_start_delay = 10 # In factor of basephi
#ctrl.theta_bounds = [0.3,0.7] # In units of phi
#ctrl.theta_bounds = [0.48,0.52] # In units of phi
#ctrl.theta_bounds = [0.5,0.5] # In units of phi
#ctrl.theta_bounds = [0,1] # In units of phi
ctrl.theta_bounds = [0,0.6] # In units of phi
ctrl.deltaf_bound = 3e-2
#ctrl.deltaf_bound = 0
ctrl.rand_init = False
ctrl.epsilon_TO = 0.5
#seed = int(np.random.rand()*1e8); print(seed)
seed = 2596829
ctrl.non_rand_seed = seed # Only used if rand_init is False
#ctrl.non_rand_seed = 57276545 # Only used if rand_init is False
#ctrl.noise_power = float('-inf')
ctrl.noise_power = -101 + 9 # in dbm
ctrl.delay_params = lib.DelayParams(lib.delay_pdf_3gpp_exp)
ctrl.delay_params.taps = 5
ctrl.max_dist_from_origin = 250 # (in meters)
ctrl.delay_params.max_dist_from_origin = 250 # (in meters)
ctrl.half_duplex = False
ctrl.hd_slot0 = 0.3 # in terms of phi
ctrl.hd_slot1 = 0.7 # in terms of phi
ctrl.hd_block_during_emit = True
ctrl.hd_block_extrawidth = 0 # as a factor of offset (see runsim to know what is offset)
ctrl.var_winlen = False
ctrl.vw_minsize = 5 # as a factor of len(p.analog_sig)
ctrl.vw_lothreshold = 0.1 # winlen reduction threshold
ctrl.vw_hithreshold = 0.1 # winlen increase threshold
ctrl.vw_lofactor = 1.5 # winlen reduction factor
ctrl.vw_hifactor = 2 # winlen increase factor
ctrl.prop_correction = False
ctrl.pc_step_wait = 0
ctrl.pc_b, ctrl.pc_a = lib.hipass_avg(7)
ctrl.pc_avg_thresh = float('inf') # If std of N previous TOx samples is above this value, then\
ctrl.pc_std_thresh = float(80) # If std of N previous TOx samples is above this value, then\
# no PC is applied (but TOy is still calculated)
ctrl.saveall = True
cdict = {'rand_init':[True]}
#cdict = {
# 'nodecount':[x for x in range(ncount_lo, ncount_hi,step)]*3
# }
pdict = {}
#pdict = {'match_decimate_fct':[lib.md_clkphase]*ntot+[lib.md_energy]*ntot+[lib.md_static]*ntot}
return ctrl, p, cdict, pdict
