def createSystem(self, nonbondedMethod=ff.NoCutoff, nonbondedCutoff=1.0*unit.nanometer, constraints=None, rigidWater=True, implicitSolvent=None, soluteDielectric=1.0, solventDielectric=78.5, ewaldErrorTolerance=0.0005, removeCMMotion=True, hydrogenMass=None): """Construct an OpenMM System representing the topology described by this prmtop file. Parameters ---------- nonbondedMethod : object=NoCutoff The method to use for nonbonded interactions. Allowed values are NoCutoff, CutoffNonPeriodic, CutoffPeriodic, Ewald, PME, or LJPME. nonbondedCutoff : distance=1*nanometer The cutoff distance to use for nonbonded interactions constraints : object=None Specifies which bonds and angles should be implemented with constraints. Allowed values are None, HBonds, AllBonds, or HAngles. rigidWater : boolean=True If true, water molecules will be fully rigid regardless of the value passed for the constraints argument implicitSolvent : object=None If not None, the implicit solvent model to use. The only allowed value is OBC2. soluteDielectric : float=1.0 The solute dielectric constant to use in the implicit solvent model. solventDielectric : float=78.5 The solvent dielectric constant to use in the implicit solvent model. ewaldErrorTolerance : float=0.0005 The error tolerance to use if nonbondedMethod is Ewald, PME, or LJPME. removeCMMotion : boolean=True If true, a CMMotionRemover will be added to the System hydrogenMass : mass=None The mass to use for hydrogen atoms bound to heavy atoms. Any mass added to a hydrogen is subtracted from the heavy atom to keep their total mass the same. Returns ------- System the newly created System """ # Create the System. sys = mm.System() boxVectors = self.topology.getPeriodicBoxVectors() if boxVectors is not None: sys.setDefaultPeriodicBoxVectors(*boxVectors) elif nonbondedMethod in (ff.CutoffPeriodic, ff.Ewald, ff.PME, ff.LJPME): raise ValueError('Illegal nonbonded method for a non-periodic system') nb = mm.NonbondedForce() sys.addForce(nb) if implicitSolvent is OBC2: gb = mm.GBSAOBCForce() gb.setSoluteDielectric(soluteDielectric) gb.setSolventDielectric(solventDielectric) sys.addForce(gb) nb.setReactionFieldDielectric(1.0) elif implicitSolvent is not None: raise ValueError('Illegal value for implicitSolvent') bonds = None angles = None periodic = None rb = None harmonicTorsion = None cmap = None mapIndices = {} bondIndices = [] topologyAtoms = list(self.topology.atoms()) exceptions = [] fudgeQQ = float(self._defaults[4]) # Build a lookup table to let us process dihedrals more quickly. dihedralTypeTable = {} for key in self._dihedralTypes: if key[1] != 'X' and key[2] != 'X': if (key[1], key[2]) not in dihedralTypeTable: dihedralTypeTable[(key[1], key[2])] = [] dihedralTypeTable[(key[1], key[2])].append(key) if (key[2], key[1]) not in dihedralTypeTable: dihedralTypeTable[(key[2], key[1])] = [] dihedralTypeTable[(key[2], key[1])].append(key) wildcardDihedralTypes = [] for key in self._dihedralTypes: if key[1] == 'X' or key[2] == 'X': wildcardDihedralTypes.append(key) for types in dihedralTypeTable.values(): types.append(key) # Loop over molecules and create the specified number of each type. for moleculeName, moleculeCount in self._molecules: moleculeType = self._moleculeTypes[moleculeName] for i in range(moleculeCount): # Record the types of all atoms. baseAtomIndex = sys.getNumParticles() atomTypes = [atom[1] for atom in moleculeType.atoms] try: bondedTypes = [self._atomTypes[t][1] for t in atomTypes] except KeyError as e: raise ValueError('Unknown atom type: ' + e.message) bondedTypes = [b if b is not None else a for a, b in zip(atomTypes, bondedTypes)] # Add atoms. for fields in moleculeType.atoms: if len(fields) >= 8: mass = float(fields[7]) else: mass = float(self._atomTypes[fields[1]][3]) sys.addParticle(mass) # Add bonds. atomBonds = [{} for x in range(len(moleculeType.atoms))] for fields in moleculeType.bonds: atoms = [int(x)-1 for x in fields[:2]] types = tuple(bondedTypes[i] for i in atoms) if len(fields) >= 5: params = fields[3:5] elif types in self._bondTypes: params = self._bondTypes[types][3:5] elif types[::-1] in self._bondTypes: params = self._bondTypes[types[::-1]][3:5] else: raise ValueError('No parameters specified for bond: '+fields[0]+', '+fields[1]) # Decide whether to use a constraint or a bond. useConstraint = False if rigidWater and topologyAtoms[baseAtomIndex+atoms[0]].residue.name == 'HOH': useConstraint = True if constraints in (AllBonds, HAngles): useConstraint = True elif constraints is HBonds: elements = [topologyAtoms[baseAtomIndex+i].element for i in atoms] if elem.hydrogen in elements: useConstraint = True # Add the bond or constraint. length = float(params[0]) if useConstraint: sys.addConstraint(baseAtomIndex+atoms[0], baseAtomIndex+atoms[1], length) else: if bonds is None: bonds = mm.HarmonicBondForce() sys.addForce(bonds) bonds.addBond(baseAtomIndex+atoms[0], baseAtomIndex+atoms[1], length, float(params[1])) # Record information that will be needed for constraining angles. atomBonds[atoms[0]][atoms[1]] = length atomBonds[atoms[1]][atoms[0]] = length # Add angles. degToRad = math.pi/180 for fields in moleculeType.angles: atoms = [int(x)-1 for x in fields[:3]] types = tuple(bondedTypes[i] for i in atoms) if len(fields) >= 6: params = fields[4:] elif types in self._angleTypes: params = self._angleTypes[types][4:] elif types[::-1] in self._angleTypes: params = self._angleTypes[types[::-1]][4:] else: raise ValueError('No parameters specified for angle: '+fields[0]+', '+fields[1]+', '+fields[2]) # Decide whether to use a constraint or a bond. useConstraint = False if rigidWater and topologyAtoms[baseAtomIndex+atoms[0]].residue.name == 'HOH': useConstraint = True if constraints is HAngles: elements = [topologyAtoms[baseAtomIndex+i].element for i in atoms] if elements[0] == elem.hydrogen and elements[2] == elem.hydrogen: useConstraint = True elif elements[1] == elem.oxygen and (elements[0] == elem.hydrogen or elements[2] == elem.hydrogen): useConstraint = True # Add the bond or constraint. theta = float(params[0])*degToRad if useConstraint: # Compute the distance between atoms and add a constraint if atoms[0] in atomBonds[atoms[1]] and atoms[2] in atomBonds[atoms[1]]: l1 = atomBonds[atoms[1]][atoms[0]] l2 = atomBonds[atoms[1]][atoms[2]] length = math.sqrt(l1*l1 + l2*l2 - 2*l1*l2*math.cos(theta)) sys.addConstraint(baseAtomIndex+atoms[0], baseAtomIndex+atoms[2], length) else: if angles is None: angles = mm.HarmonicAngleForce() sys.addForce(angles) angles.addAngle(baseAtomIndex+atoms[0], baseAtomIndex+atoms[1], baseAtomIndex+atoms[2], theta, float(params[1])) if fields[3] == '5': # This is a Urey-Bradley term, so add the bond. if bonds is None: bonds = mm.HarmonicBondForce() sys.addForce(bonds) k = float(params[3]) if k != 0: bonds.addBond(baseAtomIndex+atoms[0], baseAtomIndex+atoms[2], float(params[2]), k) # Add torsions. for fields in moleculeType.dihedrals: atoms = [int(x)-1 for x in fields[:4]] types = tuple(bondedTypes[i] for i in atoms) dihedralType = fields[4] reversedTypes = types[::-1]+(dihedralType,) types = types+(dihedralType,) if (dihedralType in ('1', '2', '4', '9') and len(fields) > 7) or (dihedralType == '3' and len(fields) > 10): paramsList = [fields] else: # Look for a matching dihedral type. paramsList = None if (types[1], types[2]) in dihedralTypeTable: dihedralTypes = dihedralTypeTable[(types[1], types[2])] else: dihedralTypes = wildcardDihedralTypes for key in dihedralTypes: if all(a == b or a == 'X' for a, b in zip(key, types)) or all(a == b or a == 'X' for a, b in zip(key, reversedTypes)): paramsList = self._dihedralTypes[key] if 'X' not in key: break if paramsList is None: raise ValueError('No parameters specified for dihedral: '+fields[0]+', '+fields[1]+', '+fields[2]+', '+fields[3]) for params in paramsList: if dihedralType in ('1', '4', '9'): # Periodic torsion k = float(params[6]) if k != 0: if periodic is None: periodic = mm.PeriodicTorsionForce() sys.addForce(periodic) periodic.addTorsion(baseAtomIndex+atoms[0], baseAtomIndex+atoms[1], baseAtomIndex+atoms[2], baseAtomIndex+atoms[3], int(float(params[7])), float(params[5])*degToRad, k) elif dihedralType == '2': # Harmonic torsion k = float(params[6]) if k != 0: if harmonicTorsion is None: harmonicTorsion = mm.CustomTorsionForce('0.5*k*(theta-theta0)^2') harmonicTorsion.addPerTorsionParameter('theta0') harmonicTorsion.addPerTorsionParameter('k') sys.addForce(harmonicTorsion) harmonicTorsion.addTorsion(baseAtomIndex+atoms[0], baseAtomIndex+atoms[1], baseAtomIndex+atoms[2], baseAtomIndex+atoms[3], (float(params[5])*degToRad, k)) else: # RB Torsion c = [float(x) for x in params[5:11]] if any(x != 0 for x in c): if rb is None: rb = mm.RBTorsionForce() sys.addForce(rb) rb.addTorsion(baseAtomIndex+atoms[0], baseAtomIndex+atoms[1], baseAtomIndex+atoms[2], baseAtomIndex+atoms[3], c[0], c[1], c[2], c[3], c[4], c[5]) # Add CMAP terms. for fields in moleculeType.cmaps: atoms = [int(x)-1 for x in fields[:5]] types = tuple(bondedTypes[i] for i in atoms) if len(fields) >= 8 and len(fields) >= 8+int(fields[6])*int(fields[7]): params = fields elif types in self._cmapTypes: params = self._cmapTypes[types] elif types[::-1] in self._cmapTypes: params = self._cmapTypes[types[::-1]] else: raise ValueError('No parameters specified for cmap: '+fields[0]+', '+fields[1]+', '+fields[2]+', '+fields[3]+', '+fields[4]) if cmap is None: cmap = mm.CMAPTorsionForce() sys.addForce(cmap) mapSize = int(params[6]) if mapSize != int(params[7]): raise ValueError('Non-square CMAPs are not supported') map = [] for i in range(mapSize): for j in range(mapSize): map.append(float(params[8+mapSize*((j+mapSize//2)%mapSize)+((i+mapSize//2)%mapSize)])) map = tuple(map) if map not in mapIndices: mapIndices[map] = cmap.addMap(mapSize, map) cmap.addTorsion(mapIndices[map], baseAtomIndex+atoms[0], baseAtomIndex+atoms[1], baseAtomIndex+atoms[2], baseAtomIndex+atoms[3], baseAtomIndex+atoms[1], baseAtomIndex+atoms[2], baseAtomIndex+atoms[3], baseAtomIndex+atoms[4]) # Set nonbonded parameters for particles. for fields in moleculeType.atoms: params = self._atomTypes[fields[1]] if len(fields) > 6: q = float(fields[6]) else: q = float(params[4]) nb.addParticle(q, float(params[6]), float(params[7])) if implicitSolvent is OBC2: if fields[1] not in self._implicitTypes: raise ValueError('No implicit solvent parameters specified for atom type: '+fields[1]) gbparams = self._implicitTypes[fields[1]] gb.addParticle(q, float(gbparams[4]), float(gbparams[5])) for fields in moleculeType.bonds: atoms = [int(x)-1 for x in fields[:2]] bondIndices.append((baseAtomIndex+atoms[0], baseAtomIndex+atoms[1])) # Record nonbonded exceptions. for fields in moleculeType.pairs: atoms = [int(x)-1 for x in fields[:2]] types = tuple(atomTypes[i] for i in atoms) if len(fields) >= 5: params = fields[3:5] elif types in self._pairTypes: params = self._pairTypes[types][3:5] elif types[::-1] in self._pairTypes: params = self._pairTypes[types[::-1]][3:5] elif not self._genpairs: raise ValueError('No pair parameters defined for atom ' 'types %s and gen-pairs is "no"' % types) else: continue # We'll use the automatically generated parameters atom1params = nb.getParticleParameters(baseAtomIndex+atoms[0]) atom2params = nb.getParticleParameters(baseAtomIndex+atoms[1]) exceptions.append((baseAtomIndex+atoms[0], baseAtomIndex+atoms[1], atom1params[0]*atom2params[0]*fudgeQQ, params[0], params[1])) for fields in moleculeType.exclusions: atoms = [int(x)-1 for x in fields] for atom in atoms[1:]: if atom > atoms[0]: exceptions.append((baseAtomIndex+atoms[0], baseAtomIndex+atom, 0, 0, 0)) # Create nonbonded exceptions. nb.createExceptionsFromBonds(bondIndices, fudgeQQ, float(self._defaults[3])) for exception in exceptions: nb.addException(exception[0], exception[1], exception[2], float(exception[3]), float(exception[4]), True) # Finish configuring the NonbondedForce. methodMap = {ff.NoCutoff:mm.NonbondedForce.NoCutoff, ff.CutoffNonPeriodic:mm.NonbondedForce.CutoffNonPeriodic, ff.CutoffPeriodic:mm.NonbondedForce.CutoffPeriodic, ff.Ewald:mm.NonbondedForce.Ewald, ff.PME:mm.NonbondedForce.PME, ff.LJPME:mm.NonbondedForce.LJPME} nb.setNonbondedMethod(methodMap[nonbondedMethod]) nb.setCutoffDistance(nonbondedCutoff) nb.setEwaldErrorTolerance(ewaldErrorTolerance) # Adjust masses. if hydrogenMass is not None: for atom1, atom2 in self.topology.bonds(): if atom1.element == elem.hydrogen: (atom1, atom2) = (atom2, atom1) if atom2.element == elem.hydrogen and atom1.element not in (elem.hydrogen, None): transferMass = hydrogenMass-sys.getParticleMass(atom2.index) sys.setParticleMass(atom2.index, hydrogenMass) sys.setParticleMass(atom1.index, sys.getParticleMass(atom1.index)-transferMass) # Add a CMMotionRemover. if removeCMMotion: sys.addForce(mm.CMMotionRemover()) return sys
def createSystem(self, topology, nonbondedMethod=NoCutoff, nonbondedCutoff=1.0*u.nanometer, constraints=None, rigidWater=True, removeCMMotion=True, hydrogenMass=None, **args): """Construct an OpenMM System representing a Topology with this force field. Parameters ---------- topology : Topology The Topology for which to create a System nonbondedMethod : object=NoCutoff The method to use for nonbonded interactions. Allowed values are NoCutoff, CutoffNonPeriodic, CutoffPeriodic, Ewald, or PME. nonbondedCutoff : distance=1*nanometer The cutoff distance to use for nonbonded interactions constraints : object=None Specifies which bonds and angles should be implemented with constraints. Allowed values are None, HBonds, AllBonds, or HAngles. rigidWater : boolean=True If true, water molecules will be fully rigid regardless of the value passed for the constraints argument removeCMMotion : boolean=True If true, a CMMotionRemover will be added to the System hydrogenMass : mass=None The mass to use for hydrogen atoms bound to heavy atoms. Any mass added to a hydrogen is subtracted from the heavy atom to keep their total mass the same. args Arbitrary additional keyword arguments may also be specified. This allows extra parameters to be specified that are specific to particular force fields. Returns ------- system the newly created System """ # Atomtype the system. G = nx.Graph() G.add_nodes_from(topology.atoms()) G.add_edges_from(topology.bonds()) cycles = nx.cycle_basis(G) for atom in topology.atoms(): atom.cycles = set() for cycle in cycles: for atom in cycle: atom.cycles.add(tuple(cycle)) find_atomtypes(atoms=list(topology.atoms()), forcefield=self) data = app.ForceField._SystemData() data.atoms = list(topology.atoms()) for atom in data.atoms: data.excludeAtomWith.append([]) # Make a list of all bonds for bond in topology.bonds(): data.bonds.append(app.ForceField._BondData(bond[0].index, bond[1].index)) # Record which atoms are bonded to each other atom bondedToAtom = [] for i in range(len(data.atoms)): bondedToAtom.append(set()) data.atomBonds.append([]) for i in range(len(data.bonds)): bond = data.bonds[i] bondedToAtom[bond.atom1].add(bond.atom2) bondedToAtom[bond.atom2].add(bond.atom1) data.atomBonds[bond.atom1].append(i) data.atomBonds[bond.atom2].append(i) # TODO: Better way to lookup nonbonded parameters...? nonbonded_params = None for generator in self.getGenerators(): if isinstance(generator, NonbondedGenerator): nonbonded_params = generator.params.paramsForType break for chain in topology.chains(): for res in chain.residues(): for atom in res.atoms(): data.atomType[atom] = atom.id if nonbonded_params: params = nonbonded_params[atom.id] data.atomParameters[atom] = params # Create the System and add atoms sys = mm.System() for atom in topology.atoms(): # Look up the atom type name, returning a helpful error message if it cannot be found. if atom not in data.atomType: raise Exception("Could not identify atom type for atom '%s'." % str(atom)) typename = data.atomType[atom] # Look up the type name in the list of registered atom types, returning a helpful error message if it cannot be found. if typename not in self._atomTypes: msg = "Could not find typename '%s' for atom '%s' in list of known atom types.\n" % (typename, str(atom)) msg += "Known atom types are: %s" % str(self._atomTypes.keys()) raise Exception(msg) # Add the particle to the OpenMM system. mass = self._atomTypes[typename].mass sys.addParticle(mass) # Adjust hydrogen masses if requested. if hydrogenMass is not None: if not u.is_quantity(hydrogenMass): hydrogenMass *= u.dalton for atom1, atom2 in topology.bonds(): if atom1.element == elem.hydrogen: (atom1, atom2) = (atom2, atom1) if atom2.element == elem.hydrogen and atom1.element not in (elem.hydrogen, None): transferMass = hydrogenMass-sys.getParticleMass(atom2.index) sys.setParticleMass(atom2.index, hydrogenMass) sys.setParticleMass(atom1.index, sys.getParticleMass(atom1.index)-transferMass) # Set periodic boundary conditions. boxVectors = topology.getPeriodicBoxVectors() if boxVectors is not None: sys.setDefaultPeriodicBoxVectors(boxVectors[0], boxVectors[1], boxVectors[2]) elif nonbondedMethod not in [NoCutoff, CutoffNonPeriodic]: raise ValueError('Requested periodic boundary conditions for a Topology that does not specify periodic box dimensions') # Make a list of all unique angles uniqueAngles = set() for bond in data.bonds: for atom in bondedToAtom[bond.atom1]: if atom != bond.atom2: if atom < bond.atom2: uniqueAngles.add((atom, bond.atom1, bond.atom2)) else: uniqueAngles.add((bond.atom2, bond.atom1, atom)) for atom in bondedToAtom[bond.atom2]: if atom != bond.atom1: if atom > bond.atom1: uniqueAngles.add((bond.atom1, bond.atom2, atom)) else: uniqueAngles.add((atom, bond.atom2, bond.atom1)) data.angles = sorted(list(uniqueAngles)) # Make a list of all unique proper torsions uniquePropers = set() for angle in data.angles: for atom in bondedToAtom[angle[0]]: if atom not in angle: if atom < angle[2]: uniquePropers.add((atom, angle[0], angle[1], angle[2])) else: uniquePropers.add((angle[2], angle[1], angle[0], atom)) for atom in bondedToAtom[angle[2]]: if atom not in angle: if atom > angle[0]: uniquePropers.add((angle[0], angle[1], angle[2], atom)) else: uniquePropers.add((atom, angle[2], angle[1], angle[0])) data.propers = sorted(list(uniquePropers)) # Make a list of all unique improper torsions for atom in range(len(bondedToAtom)): bondedTo = bondedToAtom[atom] if len(bondedTo) > 2: for subset in itertools.combinations(bondedTo, 3): data.impropers.append((atom, subset[0], subset[1], subset[2])) # Identify bonds that should be implemented with constraints if constraints == AllBonds or constraints == HAngles: for bond in data.bonds: bond.isConstrained = True elif constraints == HBonds: for bond in data.bonds: atom1 = data.atoms[bond.atom1] atom2 = data.atoms[bond.atom2] bond.isConstrained = atom1.name.startswith('H') or atom2.name.startswith('H') if rigidWater: for bond in data.bonds: atom1 = data.atoms[bond.atom1] atom2 = data.atoms[bond.atom2] if atom1.residue.name == 'HOH' and atom2.residue.name == 'HOH': bond.isConstrained = True # Identify angles that should be implemented with constraints if constraints == HAngles: for angle in data.angles: atom1 = data.atoms[angle[0]] atom2 = data.atoms[angle[1]] atom3 = data.atoms[angle[2]] numH = 0 if atom1.name.startswith('H'): numH += 1 if atom3.name.startswith('H'): numH += 1 data.isAngleConstrained.append(numH == 2 or (numH == 1 and atom2.name.startswith('O'))) else: data.isAngleConstrained = len(data.angles)*[False] if rigidWater: for i in range(len(data.angles)): angle = data.angles[i] atom1 = data.atoms[angle[0]] atom2 = data.atoms[angle[1]] atom3 = data.atoms[angle[2]] if atom1.residue.name == 'HOH' and atom2.residue.name == 'HOH' and atom3.residue.name == 'HOH': data.isAngleConstrained[i] = True # Add virtual sites for atom in data.virtualSites: (site, atoms, excludeWith) = data.virtualSites[atom] index = atom.index data.excludeAtomWith[excludeWith].append(index) if site.type == 'average2': sys.setVirtualSite(index, mm.TwoParticleAverageSite(atoms[0], atoms[1], site.weights[0], site.weights[1])) elif site.type == 'average3': sys.setVirtualSite(index, mm.ThreeParticleAverageSite(atoms[0], atoms[1], atoms[2], site.weights[0], site.weights[1], site.weights[2])) elif site.type == 'outOfPlane': sys.setVirtualSite(index, mm.OutOfPlaneSite(atoms[0], atoms[1], atoms[2], site.weights[0], site.weights[1], site.weights[2])) elif site.type == 'localCoords': sys.setVirtualSite(index, mm.LocalCoordinatesSite(atoms[0], atoms[1], atoms[2], mm.Vec3(site.originWeights[0], site.originWeights[1], site.originWeights[2]), mm.Vec3(site.xWeights[0], site.xWeights[1], site.xWeights[2]), mm.Vec3(site.yWeights[0], site.yWeights[1], site.yWeights[2]), mm.Vec3(site.localPos[0], site.localPos[1], site.localPos[2]))) # Add forces to the System for force in self._forces: force.createForce(sys, data, nonbondedMethod, nonbondedCutoff, args) if removeCMMotion: sys.addForce(mm.CMMotionRemover()) # Let force generators do postprocessing for force in self._forces: if 'postprocessSystem' in dir(force): force.postprocessSystem(sys, data, args) # Execute scripts found in the XML files. for script in self._scripts: exec(script, locals()) return sys
def createSystem(self, nonbondedMethod=ff.NoCutoff, nonbondedCutoff=1.0 * unit.nanometer, constraints=None, rigidWater=True, implicitSolvent=None, implicitSolventSaltConc=0.0 * (unit.moles / unit.liter), implicitSolventKappa=None, temperature=298.15 * unit.kelvin, soluteDielectric=1.0, solventDielectric=78.5, removeCMMotion=True, hydrogenMass=None, ewaldErrorTolerance=0.0005): """Construct an OpenMM System representing the topology described by this prmtop file. Parameters: - nonbondedMethod (object=NoCutoff) The method to use for nonbonded interactions. Allowed values are NoCutoff, CutoffNonPeriodic, CutoffPeriodic, Ewald, or PME. - nonbondedCutoff (distance=1*nanometer) The cutoff distance to use for nonbonded interactions - constraints (object=None) Specifies which bonds angles should be implemented with constraints. Allowed values are None, HBonds, AllBonds, or HAngles. - rigidWater (boolean=True) If true, water molecules will be fully rigid regardless of the value passed for the constraints argument - implicitSolvent (object=None) If not None, the implicit solvent model to use. Allowed values are HCT, OBC1, OBC2, GBn, or GBn2. - implicitSolventSaltConc (float=0.0*unit.moles/unit.liter) The salt concentration for GB calculations (modelled as a debye screening parameter). It is converted to the debye length (kappa) using the provided temperature and solventDielectric - temperature (float=300*kelvin) Temperature of the system. Only used to compute the Debye length from implicitSolventSoltConc - implicitSolventKappa (float units of 1/length) If this value is set, implicitSolventSaltConc will be ignored. - soluteDielectric (float=1.0) The solute dielectric constant to use in the implicit solvent model. - solventDielectric (float=78.5) The solvent dielectric constant to use in the implicit solvent model. - removeCMMotion (boolean=True) If true, a CMMotionRemover will be added to the System - hydrogenMass (mass=None) The mass to use for hydrogen atoms bound to heavy atoms. Any mass added to a hydrogen is subtracted from the heavy atom to keep their total mass the same. - ewaldErrorTolerance (float=0.0005) The error tolerance to use if nonbondedMethod is Ewald or PME. Returns: the newly created System """ methodMap = { ff.NoCutoff: 'NoCutoff', ff.CutoffNonPeriodic: 'CutoffNonPeriodic', ff.CutoffPeriodic: 'CutoffPeriodic', ff.Ewald: 'Ewald', ff.PME: 'PME' } if nonbondedMethod not in methodMap: raise ValueError('Illegal value for nonbonded method') if not self._prmtop.getIfBox() and nonbondedMethod in ( ff.CutoffPeriodic, ff.Ewald, ff.PME): raise ValueError( 'Illegal nonbonded method for a non-periodic system') constraintMap = { None: None, ff.HBonds: 'h-bonds', ff.AllBonds: 'all-bonds', ff.HAngles: 'h-angles' } if constraints is None: constraintString = None elif constraints in constraintMap: constraintString = constraintMap[constraints] else: raise ValueError('Illegal value for constraints') if implicitSolvent is None: implicitString = None elif implicitSolvent is HCT: implicitString = 'HCT' elif implicitSolvent is OBC1: implicitString = 'OBC1' elif implicitSolvent is OBC2: implicitString = 'OBC2' elif implicitSolvent is GBn: implicitString = 'GBn' elif implicitSolvent is GBn2: implicitString = 'GBn2' else: raise ValueError('Illegal value for implicit solvent model') # If implicitSolventKappa is None, compute it from the salt concentration if implicitSolvent is not None and implicitSolventKappa is None: if unit.is_quantity(implicitSolventSaltConc): implicitSolventSaltConc = implicitSolventSaltConc.value_in_unit( unit.moles / unit.liter) if unit.is_quantity(temperature): temperature = temperature.value_in_unit(unit.kelvin) # The constant is 1 / sqrt( epsilon_0 * kB / (2 * NA * q^2 * 1000) ) # where NA is avogadro's number, epsilon_0 is the permittivity of # free space, q is the elementary charge (this number matches # Amber's kappa conversion factor) implicitSolventKappa = 50.33355 * sqrt( implicitSolventSaltConc / solventDielectric / temperature) # Multiply by 0.73 to account for ion exclusions, and multiply by 10 # to convert to 1/nm from 1/angstroms implicitSolventKappa *= 7.3 elif implicitSolvent is None: implicitSolventKappa = 0.0 sys = amber_file_parser.readAmberSystem( prmtop_loader=self._prmtop, shake=constraintString, nonbondedCutoff=nonbondedCutoff, nonbondedMethod=methodMap[nonbondedMethod], flexibleConstraints=False, gbmodel=implicitString, soluteDielectric=soluteDielectric, solventDielectric=solventDielectric, implicitSolventKappa=implicitSolventKappa, rigidWater=rigidWater, elements=self.elements) if hydrogenMass is not None: for atom1, atom2 in self.topology.bonds(): if atom1.element == elem.hydrogen: (atom1, atom2) = (atom2, atom1) if atom2.element == elem.hydrogen and atom1.element not in ( elem.hydrogen, None): transferMass = hydrogenMass - sys.getParticleMass( atom2.index) sys.setParticleMass(atom2.index, hydrogenMass) sys.setParticleMass( atom1.index, sys.getParticleMass(atom1.index) - transferMass) for force in sys.getForces(): if isinstance(force, mm.NonbondedForce): force.setEwaldErrorTolerance(ewaldErrorTolerance) if removeCMMotion: sys.addForce(mm.CMMotionRemover()) return sys
def createSystem(self, nonbondedMethod=ff.NoCutoff, nonbondedCutoff=1.0*nanometer, ewaldErrorTolerance=0.0005, removeCMMotion=True, hydrogenMass=None): """Construct an OpenMM System representing the topology described by this DMS file Parameters ---------- nonbondedMethod : object=NoCutoff The method to use for nonbonded interactions. Allowed values are NoCutoff, CutoffNonPeriodic, CutoffPeriodic, Ewald, or PME. nonbondedCutoff : distance=1*nanometer The cutoff distance to use for nonbonded interactions ewaldErrorTolerance : float=0.0005 The error tolerance to use if nonbondedMethod is Ewald or PME. removeCMMotion : boolean=True If true, a CMMotionRemover will be added to the System hydrogenMass : mass=None The mass to use for hydrogen atoms bound to heavy atoms. Any mass added to a hydrogen is subtracted from the heavy atom to keep their total mass the same. """ self._checkForUnsupportedTerms() sys = mm.System() # Buld the box dimensions sys = mm.System() boxSize = self.topology.getUnitCellDimensions() if boxSize is not None: sys.setDefaultPeriodicBoxVectors((boxSize[0], 0, 0), (0, boxSize[1], 0), (0, 0, boxSize[2])) elif nonbondedMethod in (ff.CutoffPeriodic, ff.Ewald, ff.PME): raise ValueError('Illegal nonbonded method for a non-periodic system') # Create all of the particles for mass in self._conn.execute('SELECT mass from particle'): sys.addParticle(mass[0]*dalton) # Add all of the forces self._addBondsToSystem(sys) self._addAnglesToSystem(sys) self._addConstraintsToSystem(sys) self._addPeriodicTorsionsToSystem(sys) self._addImproperHarmonicTorsionsToSystem(sys) self._addCMAPToSystem(sys) self._addVirtualSitesToSystem(sys) nb = self._addNonbondedForceToSystem(sys) # Finish configuring the NonbondedForce. methodMap = {ff.NoCutoff:mm.NonbondedForce.NoCutoff, ff.CutoffNonPeriodic:mm.NonbondedForce.CutoffNonPeriodic, ff.CutoffPeriodic:mm.NonbondedForce.CutoffPeriodic, ff.Ewald:mm.NonbondedForce.Ewald, ff.PME:mm.NonbondedForce.PME} nb.setNonbondedMethod(methodMap[nonbondedMethod]) nb.setCutoffDistance(nonbondedCutoff) nb.setEwaldErrorTolerance(ewaldErrorTolerance) # Adjust masses. if hydrogenMass is not None: for atom1, atom2 in self.topology.bonds(): if atom1.element == hydrogen: (atom1, atom2) = (atom2, atom1) if atom2.element == hydrogen and atom1.element not in (hydrogen, None): transferMass = hydrogenMass-sys.getParticleMass(atom2.index) sys.setParticleMass(atom2.index, hydrogenMass) sys.setParticleMass(atom1.index, sys.getParticleMass(atom1.index)-transferMass) # Add a CMMotionRemover. if removeCMMotion: sys.addForce(mm.CMMotionRemover()) return sys
def createSystem(self, nonbondedMethod=ff.NoCutoff, nonbondedCutoff=1.0 * nanometer, ewaldErrorTolerance=0.0005, removeCMMotion=True, hydrogenMass=None, OPLS=False, implicitSolvent=None, AGBNPVersion=1): """Construct an OpenMM System representing the topology described by this DMS file Parameters ---------- nonbondedMethod : object=NoCutoff The method to use for nonbonded interactions. Allowed values are NoCutoff, CutoffNonPeriodic, CutoffPeriodic, Ewald, PME, or LJPME. nonbondedCutoff : distance=1*nanometer The cutoff distance to use for nonbonded interactions ewaldErrorTolerance : float=0.0005 The error tolerance to use if nonbondedMethod is Ewald, PME, or LJPME. removeCMMotion : boolean=True If true, a CMMotionRemover will be added to the System hydrogenMass : mass=None The mass to use for hydrogen atoms bound to heavy atoms. Any mass added to a hydrogen is subtracted from the heavy atom to keep their total mass the same. OPLS : boolean=False If True, forces OPLS combining rules implicitSolvent: string=None If not None, creates implicit solvent force of the given name Allowed values are: HCT and 'AGBNP' (the corresponding tables must be present in the DMS file) AGBNPVersion: int=1 AGBNP implicit solvent version """ self._checkForUnsupportedTerms() sys = mm.System() # Build the box dimensions boxSize = self.topology.getUnitCellDimensions() if boxSize is not None: sys.setDefaultPeriodicBoxVectors( (boxSize[0], 0, 0), (0, boxSize[1], 0), (0, 0, boxSize[2])) elif nonbondedMethod in (ff.CutoffPeriodic, ff.Ewald, ff.PME, ff.LJPME): raise ValueError( 'Illegal nonbonded method for a non-periodic system') # Create all of the particles for (fcounter, conn, tables, offset) in self._localVars(): for mass in conn.execute('SELECT mass FROM particle ORDER BY id'): sys.addParticle(mass[0] * dalton) # Add all of the forces self._addBondsToSystem(sys) self._addAnglesToSystem(sys) self._addConstraintsToSystem(sys) self._addPeriodicTorsionsToSystem(sys, OPLS) self._addImproperHarmonicTorsionsToSystem(sys) self._addCMAPToSystem(sys) self._addVirtualSitesToSystem(sys) self._addPositionalHarmonicRestraints(sys) nb, cnb = self._addNonbondedForceToSystem(sys, OPLS) # Finish configuring the NonbondedForce. methodMap = { ff.NoCutoff: mm.NonbondedForce.NoCutoff, ff.CutoffNonPeriodic: mm.NonbondedForce.CutoffNonPeriodic, ff.CutoffPeriodic: mm.NonbondedForce.CutoffPeriodic, ff.Ewald: mm.NonbondedForce.Ewald, ff.PME: mm.NonbondedForce.PME, ff.LJPME: mm.NonbondedForce.LJPME } nb.setNonbondedMethod(methodMap[nonbondedMethod]) nb.setCutoffDistance(nonbondedCutoff) nb.setEwaldErrorTolerance(ewaldErrorTolerance) if cnb is not None: nb.setUseDispersionCorrection(False) if nonbondedMethod in (ff.CutoffPeriodic, ff.Ewald, ff.PME, ff.LJPME): cnb.setNonbondedMethod(methodMap[ff.CutoffPeriodic]) cnb.setCutoffDistance(nonbondedCutoff) elif nonbondedMethod == ff.CutoffNonPeriodic: cnb.setNonbondedMethod(methodMap[ff.CutoffNonPeriodic]) cnb.setCutoffDistance(nonbondedCutoff) else: cnb.setNonbondedMethod(methodMap[ff.NoCutoff]) cnb.setUseSwitchingFunction(False) cnb.setUseLongRangeCorrection(False) #add implicit solvent model. if implicitSolvent is not None: if not (implicitSolvent in (HCT, 'AGBNP', 'GVolSA', 'AGBNP3')): raise ValueError('Illegal implicit solvent method') if self._verbose: print('Adding implicit solvent ...') #with implicit solvent turn off native reaction field #However note that this does not affect the shifted Coulomb potential of the Nonbonded force #(it affects the only the energy, not the forces and equation of motion) nb.setReactionFieldDielectric(1.0) if implicitSolvent is HCT: gb_parms = self._get_gb_params() if gb_parms: if self._verbose: print('Adding HCT GB force ...') gb = GBSAHCTForce(SA='ACE') for i in range(len(gb_parms)): gb.addParticle(list(gb_parms[i])) gb.finalize() sys.addForce(gb) else: raise IOError("No HCT parameters found in DMS file") if implicitSolvent is 'AGBNP3': #load AGBNP3 plugin if available try: from AGBNP3plugin import AGBNP3Force except ImportError: raise NotImplementedError( 'AGBNP3 is not supported in this version') #sets up AGBNP3 gb_parms = self._get_agbnp2_params() if gb_parms: if self._verbose: print('Adding AGBNP3 force ...') gb = AGBNP3Force() # add particles for i in range(len(gb_parms)): p = gb_parms[i] gb.addParticle(p[0], p[1], p[2], p[3], p[4], p[5], p[6]) # connection table (from bonds) self._add_agbnp2_ct(gb) sys.addForce(gb) else: raise IOError("No AGBNP parameters found in DMS file") if implicitSolvent is 'GVolSA': #implemented as AGBNP version 0 implicitSolvent = 'AGBNP' AGBNPVersion = 0 if self._verbose: print('Using GVolSA') if implicitSolvent is 'AGBNP': #load AGBNP plugin if available try: from AGBNPplugin import AGBNPForce except ImportError: raise NotImplementedError( 'AGBNP is not supported in this version') #sets up AGBNP gb_parms = self._get_agbnp2_params() if gb_parms: gb = AGBNPForce() gb.setNonbondedMethod(methodMap[nonbondedMethod]) gb.setCutoffDistance(nonbondedCutoff) gb.setVersion(AGBNPVersion) if self._verbose: print('Using AGBNP force version %d ...' % AGBNPVersion) # add particles for i in range(len(gb_parms)): [ radiusN, chargeN, gammaN, alphaN, hbtype, hbwN, ishydrogenN ] = gb_parms[i] h_flag = ishydrogenN > 0 gb.addParticle(radiusN, gammaN, alphaN, chargeN, h_flag) sys.addForce(gb) self.gb_parms = gb_parms self.agbnp = gb else: raise IOError("No AGBNP parameters found in DMS file") # Adjust masses. if hydrogenMass is not None: for atom1, atom2 in self.topology.bonds(): if atom1.element == hydrogen: (atom1, atom2) = (atom2, atom1) if atom2.element == hydrogen and atom1.element not in ( hydrogen, None): transferMass = hydrogenMass - sys.getParticleMass( atom2.index) sys.setParticleMass(atom2.index, hydrogenMass) sys.setParticleMass( atom1.index, sys.getParticleMass(atom1.index) - transferMass) # Add a CMMotionRemover. if removeCMMotion: sys.addForce(mm.CMMotionRemover()) return sys
def createSystem(self, nonbondedMethod=ff.NoCutoff, nonbondedCutoff=1.0 * u.nanometer, constraints=None, rigidWater=True, implicitSolvent=None, implicitSolventSaltConc=0.0 * (u.moles / u.liter), implicitSolventKappa=None, temperature=298.15 * u.kelvin, soluteDielectric=1.0, solventDielectric=78.5, removeCMMotion=True, hydrogenMass=None, ewaldErrorTolerance=0.0005, switchDistance=0.0 * u.nanometer, gbsaModel='ACE'): """Construct an OpenMM System representing the topology described by this prmtop file. Parameters ---------- nonbondedMethod : object=NoCutoff The method to use for nonbonded interactions. Allowed values are NoCutoff, CutoffNonPeriodic, CutoffPeriodic, Ewald, PME, or LJPME. nonbondedCutoff : distance=1*nanometer The cutoff distance to use for nonbonded interactions constraints : object=None Specifies which bonds angles should be implemented with constraints. Allowed values are None, HBonds, AllBonds, or HAngles. rigidWater : boolean=True If true, water molecules will be fully rigid regardless of the value passed for the constraints argument implicitSolvent : object=None If not None, the implicit solvent model to use. Allowed values are HCT, OBC1, OBC2, GBn, or GBn2. implicitSolventSaltConc : float=0.0*unit.moles/unit.liter The salt concentration for GB calculations (modelled as a debye screening parameter). It is converted to the debye length (kappa) using the provided temperature and solventDielectric temperature : float=300*kelvin Temperature of the system. Only used to compute the Debye length from implicitSolventSoltConc implicitSolventKappa : float units of 1/length If this value is set, implicitSolventSaltConc will be ignored. soluteDielectric : float=1.0 The solute dielectric constant to use in the implicit solvent model. solventDielectric : float=78.5 The solvent dielectric constant to use in the implicit solvent model. removeCMMotion : boolean=True If true, a CMMotionRemover will be added to the System hydrogenMass : mass=None The mass to use for hydrogen atoms bound to heavy atoms. Any mass added to a hydrogen is subtracted from the heavy atom to keep their total mass the same. If rigidWater is used to make water molecules rigid, then water hydrogens are not altered. ewaldErrorTolerance : float=0.0005 The error tolerance to use if nonbondedMethod is Ewald, PME, or LJPME. switchDistance : float=0*nanometers The distance at which the potential energy switching function is turned on for Lennard-Jones interactions. If the switchDistance is 0 or evaluates to boolean False, no switching function will be used. Values greater than nonbondedCutoff or less than 0 raise ValueError gbsaModel : str='ACE' The SA model used to model the nonpolar solvation component of GB implicit solvent models. If GB is active, this must be 'ACE' or None (the latter indicates no SA model will be used). Other values will result in a ValueError Returns ------- System the newly created System """ if self._prmtop.chamber: raise ValueError("CHAMBER-style topology file detected. CHAMBER " "topologies are not supported -- use the native " "CHARMM files directly.") methodMap = { ff.NoCutoff: 'NoCutoff', ff.CutoffNonPeriodic: 'CutoffNonPeriodic', ff.CutoffPeriodic: 'CutoffPeriodic', ff.Ewald: 'Ewald', ff.PME: 'PME', ff.LJPME: 'LJPME' } if nonbondedMethod not in methodMap: raise ValueError('Illegal value for nonbonded method') if not self._prmtop.getIfBox() and nonbondedMethod in ( ff.CutoffPeriodic, ff.Ewald, ff.PME, ff.LJPME): raise ValueError( 'Illegal nonbonded method for a non-periodic system') constraintMap = { None: None, ff.HBonds: 'h-bonds', ff.AllBonds: 'all-bonds', ff.HAngles: 'h-angles' } if constraints is None: constraintString = None elif constraints in constraintMap: constraintString = constraintMap[constraints] else: raise ValueError('Illegal value for constraints') if implicitSolvent is None: implicitString = None elif implicitSolvent is HCT: implicitString = 'HCT' elif implicitSolvent is OBC1: implicitString = 'OBC1' elif implicitSolvent is OBC2: implicitString = 'OBC2' elif implicitSolvent is GBn: implicitString = 'GBn' elif implicitSolvent is GBn2: implicitString = 'GBn2' else: raise ValueError('Illegal value for implicit solvent model') # If implicitSolventKappa is None, compute it from the salt concentration if implicitSolvent is not None and implicitSolventKappa is None: if u.is_quantity(implicitSolventSaltConc): implicitSolventSaltConc = implicitSolventSaltConc.value_in_unit( u.moles / u.liter) if u.is_quantity(temperature): temperature = temperature.value_in_unit(u.kelvin) # The constant is 1 / sqrt( epsilon_0 * kB / (2 * NA * q^2 * 1000) ) # where NA is avogadro's number, epsilon_0 is the permittivity of # free space, q is the elementary charge (this number matches # Amber's kappa conversion factor) implicitSolventKappa = 50.33355 * sqrt( implicitSolventSaltConc / solventDielectric / temperature) # Multiply by 0.73 to account for ion exclusions, and multiply by 10 # to convert to 1/nm from 1/angstroms implicitSolventKappa *= 7.3 elif implicitSolvent is None: implicitSolventKappa = 0.0 sys = amber_file_parser.readAmberSystem( self.topology, prmtop_loader=self._prmtop, shake=constraintString, nonbondedCutoff=nonbondedCutoff, nonbondedMethod=methodMap[nonbondedMethod], flexibleConstraints=False, gbmodel=implicitString, soluteDielectric=soluteDielectric, solventDielectric=solventDielectric, implicitSolventKappa=implicitSolventKappa, rigidWater=rigidWater, elements=self.elements, gbsaModel=gbsaModel) if hydrogenMass is not None: for atom1, atom2 in self.topology.bonds(): if atom1.element == elem.hydrogen: (atom1, atom2) = (atom2, atom1) if rigidWater and atom2.residue.name == 'HOH': continue if atom2.element == elem.hydrogen and atom1.element not in ( elem.hydrogen, None): transferMass = hydrogenMass - sys.getParticleMass( atom2.index) sys.setParticleMass(atom2.index, hydrogenMass) sys.setParticleMass( atom1.index, sys.getParticleMass(atom1.index) - transferMass) for force in sys.getForces(): if isinstance(force, mm.NonbondedForce): force.setEwaldErrorTolerance(ewaldErrorTolerance) if removeCMMotion: sys.addForce(mm.CMMotionRemover()) if switchDistance and nonbondedMethod is not ff.NoCutoff: # make sure it's legal if (_strip_optunit(switchDistance, u.nanometer) >= _strip_optunit( nonbondedCutoff, u.nanometer)): raise ValueError('switchDistance is too large compared ' 'to the cutoff!') if _strip_optunit(switchDistance, u.nanometer) < 0: # Detects negatives for both Quantity and float raise ValueError('switchDistance must be non-negative!') force.setUseSwitchingFunction(True) force.setSwitchingDistance(switchDistance) return sys
def createSystem(self, nonbondedMethod=ff.NoCutoff, nonbondedCutoff=1.0*nanometer, ewaldErrorTolerance=0.0005, removeCMMotion=True, hydrogenMass=None, OPLS=False, implicitSolvent=None): """Construct an OpenMM System representing the topology described by this dms file Parameters: - nonbondedMethod (object=NoCutoff) The method to use for nonbonded interactions. Allowed values are NoCutoff, CutoffNonPeriodic, CutoffPeriodic, Ewald, or PME. - nonbondedCutoff (distance=1*nanometer) The cutoff distance to use for nonbonded interactions - ewaldErrorTolerance (float=0.0005) The error tolerance to use if nonbondedMethod is Ewald or PME. - removeCMMotion (boolean=True) If true, a CMMotionRemover will be added to the System - hydrogenMass (mass=None) The mass to use for hydrogen atoms bound to heavy atoms. Any mass added to a hydrogen is subtracted from the heavy atom to keep their total mass the same. - OPLS (boolean=False) If True, force field parameters are interpreted as OPLS parameters; OPLS variants of torsional and non-bonded forces are constructed. - implicitSolvent (object=None) if not None, the implicit solvent model to use, the only allowed value is HCT """ self._checkForUnsupportedTerms() sys = mm.System() # Buld the box dimensions sys = mm.System() boxSize = self.topology.getUnitCellDimensions() if boxSize is not None: sys.setDefaultPeriodicBoxVectors((boxSize[0], 0, 0), (0, boxSize[1], 0), (0, 0, boxSize[2])) elif nonbondedMethod in (ff.CutoffPeriodic, ff.Ewald, ff.PME): raise ValueError('Illegal nonbonded method for a non-periodic system') # Create all of the particles for mass in self._conn.execute('SELECT mass FROM particle ORDER BY id'): sys.addParticle(mass[0]*dalton) # Add all of the forces self._addBondsToSystem(sys) self._addAnglesToSystem(sys) self._addConstraintsToSystem(sys) self._addPeriodicTorsionsToSystem(sys, OPLS) self._addImproperHarmonicTorsionsToSystem(sys) self._addCMAPToSystem(sys) self._addVirtualSitesToSystem(sys) nb, cnb = self._addNonbondedForceToSystem(sys, OPLS) # Finish configuring the NonbondedForce. methodMap = {ff.NoCutoff:mm.NonbondedForce.NoCutoff, ff.CutoffNonPeriodic:mm.NonbondedForce.CutoffNonPeriodic, ff.CutoffPeriodic:mm.NonbondedForce.CutoffPeriodic, ff.Ewald:mm.NonbondedForce.Ewald, ff.PME:mm.NonbondedForce.PME} nb.setNonbondedMethod(methodMap[nonbondedMethod]) nb.setCutoffDistance(nonbondedCutoff) nb.setEwaldErrorTolerance(ewaldErrorTolerance) if cnb is not None: cnb.setNonbondedMethod(methodMap[nonbondedMethod]) cnb.setCutoffDistance(nonbondedCutoff) #add implicit solvent model. Right now, only HCT model is considered. if implicitSolvent is not None: print('Adding implicit solvent ...') if implicitSolvent is HCT: gb_parms = self._get_gb_params() if gb_parms: print('Adding HCT GB force ...') gb = GBSAHCTForce(SA='ACE') for i in range(len(gb_parms)): gb.addParticle(list(gb_parms[i])) sys.addForce(gb) if implicitSolvent is 'AGBNP': #load AGBNP3 plugin if available try: from AGBNP3plugin import AGBNP3Force AGBNP3enabled = True except ImportError: AGBNP3enabled = False #sets up AGBNP3 if AGBNP3enabled: gb_parms = self._get_agbnp2_params() if gb_parms: print('Adding AGBNP3 force ...') gb = AGBNP3Force() # add particles for i in range(len(gb_parms)): p = gb_parms[i] gb.addParticle(p[0],p[1],p[2],p[3],p[4],p[5],p[6]) # connection table (from bonds) self._add_agbnp2_ct(gb) sys.addForce(gb) else: print('Warning: AGBNP is not supported in this version') if implicitSolvent is 'GVolSA': #load Gaussvol plugin if available try: from GVolplugin import GVolForce GVolEnabled = True except ImportError: GVolEnabled = False #sets up GVol if GVolEnabled: gb_parms = self._get_agbnp2_params() if gb_parms: print('Adding GVol force ...') gb = GVolForce() gb.setNonbondedMethod(methodMap[nonbondedMethod]) gb.setCutoffDistance(nonbondedCutoff) # add particles for i in range(len(gb_parms)): [radiusN,chargeN,gammaN,alphaN,hbtype,hbwN,ishydrogenN] = gb_parms[i] h_flag = ishydrogenN > 0 Roffset = 0.05; radiusN += Roffset; gb.addParticle(radiusN, gammaN, h_flag) #print "Adding", radiusN, gammaN, h_flag print "Adding GVolforce ..." sys.addForce(gb) print "Done" else: print('Warning: GVol is not supported in this version') # Adjust masses. if hydrogenMass is not None: for atom1, atom2 in self.topology.bonds(): if atom1.element == hydrogen: (atom1, atom2) = (atom2, atom1) if atom2.element == hydrogen and atom1.element not in (hydrogen, None): transferMass = hydrogenMass-sys.getParticleMass(atom2.index) sys.setParticleMass(atom2.index, hydrogenMass) sys.setParticleMass(atom1.index, sys.getParticleMass(atom1.index)-transferMass) # Add a CMMotionRemover. if removeCMMotion: sys.addForce(mm.CMMotionRemover()) return sys
def createSystem(self, nonbondedMethod=None, nonbondedCutoff=None, removeCMMotion=True, constraints=None): """Construct an OpenMM System representing the topology described by this prmtop infile. Parameters: - nonbondedMethod (object=NoCutoff) The method to use for nonbonded interactions. Allowed values are NoCutoff, CutoffNonPeriodic, CutoffPeriodic, Ewald, or PME. - nonbondedCutoff (distance=1*nanometer) The cutoff distance to use for nonbonded interactions - constraints (object=None) Specifies which bonds and angles should be implemented with constraints. Allowed values are None, HBonds, AllBonds or HAngles. - rigidWater (boolean=True) If true, water molecules will be fully rigid regardless of the value passed for the constraints argument - implicitSolvent (object=None) If not None, the implicit solvent model to use. The only allowed value is OBC2. - soluteDielectric (float=1.0) The solute dielectric constant to use in the implicit solvent model. - solventDielectric (float=78.5) The solvent dielectric constant to use in the implicit solvent model. - ewaldErrorTolerance (float=0.0005) The error tolerance to use if nonbondedMethod is Ewald or PME. - removeCMMotion (boolean=True) If true, a CMMotionRemover will be added to the System - hydrogenMass (mass=None) The mass to use for hydrogen atoms bound to heavy atoms. Any mass added to a hydrogen is subtracted from the heavy atom to keep their total mass the same. Returns: the newly created System """ # Create the System. syst = mm.System() nb = mm.NonbondedForce() nb.setNonbondedMethod(nonbondedMethod) nb.setCutoffDistance(nonbondedCutoff) syst.addForce(nb) boxSize = self.topology.getUnitCellDimensions() if boxSize is not None: syst.setDefaultPeriodicBoxVectors( (boxSize[0], 0, 0), (0, boxSize[1], 0), (0, 0, boxSize[2])) # Build a lookup table to let us process dihedrals more quickly. dihedralTypeTable, wildcardDihedralTypes = self._buildDihLookupTable() # Loop over molecules and create the specified number of each type. allAtomTypes = [] allcharges = [] allExceptions = [] for moleculeName, moleculeCount in self.molecules: moleculeType = self.moleculeTypes[moleculeName] for i in range(moleculeCount): # Record the types of all atoms. baseAtomIndex = syst.getNumParticles() atomTypes = [atom[1] for atom in moleculeType.atoms] charges = [atom[6] for atom in moleculeType.atoms] for charge in charges: allcharges.append(charge) for atomType in atomTypes: allAtomTypes.append(atomType) try: bondedTypes = [self.atomTypes[t][1] for t in atomTypes] except KeyError as e: raise ValueError('Unknown atom type: ' + e.message) bondedTypes = [ b if b is not None else a for a, b in zip(atomTypes, bondedTypes) ] # Add atoms. self._addAtomsToSystem(syst, moleculeType) # Add bonds. atomBonds = self._addBondsToSystem(syst, moleculeType, bondedTypes, constraints, baseAtomIndex) # Add constraints self._addConstraintsToSystem(syst, moleculeType, bondedTypes, constraints, baseAtomIndex) # Add angles. self._addAngleToSystem(syst, moleculeType, bondedTypes, atomBonds, baseAtomIndex) # Add torsions. self._addTorsionToSystem(syst, moleculeType, bondedTypes, dihedralTypeTable, wildcardDihedralTypes, baseAtomIndex) # Set nonbonded parameters for particles. exceptions = self._setnonbondedParams(nb, moleculeType, baseAtomIndex, atomTypes) for exception in exceptions: allExceptions.append(exception) # Add pairInteractions first as exceptions, followed by the rest # This way other exceptions can override pairInteractions for i in range(syst.getNumParticles() - 1): atomType1 = allAtomTypes[i] for j in range(i + 1, syst.getNumParticles()): atomType2 = allAtomTypes[j] try: sig, eps = self.nonbondParams[(atomType1, atomType2)] except KeyError: try: sig, eps = self.nonbondParams[(atomType2, atomType1)] except KeyError(): msg = "%s,%s pair interactions not found" % (atomType2, atomType1) raise KeyError(msg) chargeProd = float(allcharges[i]) * float(allcharges[j]) nb.addException(i, j, chargeProd, sig, eps, True) for exception in allExceptions: nb.addException(exception[0], exception[1], exception[2], float(exception[3]), float(exception[4]), True) # Add a CMMotionRemover. if removeCMMotion: syst.addForce(mm.CMMotionRemover()) return syst
def export(system): ''' Generate OpenMM system from a system Parameters ---------- system : System Returns ------- omm_system : simtk.openmm.System ''' try: import simtk.openmm as mm except ImportError: raise ImportError('Can not import OpenMM') supported_terms = { LJ126Term, MieTerm, HarmonicBondTerm, HarmonicAngleTerm, SDKAngleTerm, PeriodicDihedralTerm, OplsImproperTerm, HarmonicImproperTerm, DrudeTerm } unsupported = system.ff_classes - supported_terms if unsupported != set(): raise Exception( 'Unsupported FF terms: %s' % (', '.join(map(lambda x: x.__name__, unsupported)))) if system.vsite_types - {TIP4PSite} != set(): raise Exception( 'Virtual sites other than TIP4PSite haven\'t been implemented') top = system.topology ff = system.ff omm_system = mm.System() if system.use_pbc: omm_system.setDefaultPeriodicBoxVectors(*top.cell.vectors) for atom in top.atoms: omm_system.addParticle(atom.mass) ### Set up bonds ####################################################################### for bond_class in system.bond_classes: if bond_class == HarmonicBondTerm: logger.info('Setting up harmonic bonds...') bforce = mm.HarmonicBondForce() for bond in top.bonds: if bond.is_drude: # DrudeForce will handle the bond between Drude pair continue bterm = system.bond_terms[id(bond)] if type(bterm) != HarmonicBondTerm: continue bforce.addBond(bond.atom1.id, bond.atom2.id, bterm.length, bterm.k * 2) else: raise Exception('Bond terms other that HarmonicBondTerm ' 'haven\'t been implemented') bforce.setUsesPeriodicBoundaryConditions(system.use_pbc) bforce.setForceGroup(ForceGroup.BOND) omm_system.addForce(bforce) ### Set up angles ####################################################################### for angle_class in system.angle_classes: if angle_class == HarmonicAngleTerm: logger.info('Setting up harmonic angles...') aforce = mm.HarmonicAngleForce() for angle in top.angles: aterm = system.angle_terms[id(angle)] if type(aterm) == HarmonicAngleTerm: aforce.addAngle(angle.atom1.id, angle.atom2.id, angle.atom3.id, aterm.theta * PI / 180, aterm.k * 2) elif angle_class == SDKAngleTerm: logger.info('Setting up SDK angles...') aforce = mm.CustomCompoundBondForce( 3, 'k*(theta-theta0)^2+step(rmin-r)*LJ96;' 'LJ96=6.75*epsilon*((sigma/r)^9-(sigma/r)^6)+epsilon;' 'theta=angle(p1,p2,p3);' 'r=distance(p1,p3);' 'rmin=1.144714*sigma') aforce.addPerBondParameter('theta0') aforce.addPerBondParameter('k') aforce.addPerBondParameter('epsilon') aforce.addPerBondParameter('sigma') for angle in top.angles: aterm = system.angle_terms[id(angle)] if type(aterm) != SDKAngleTerm: continue vdw = ff.get_vdw_term(ff.atom_types[angle.atom1.type], ff.atom_types[angle.atom2.type]) if type( vdw ) != MieTerm or vdw.repulsion != 9 or vdw.attraction != 6: raise Exception( f'Corresponding 9-6 MieTerm for {aterm} not found in FF' ) aforce.addBond( [angle.atom1.id, angle.atom2.id, angle.atom3.id], [ aterm.theta * PI / 180, aterm.k, vdw.epsilon, vdw.sigma ]) else: raise Exception( 'Angle terms other that HarmonicAngleTerm and SDKAngleTerm ' 'haven\'t been implemented') aforce.setUsesPeriodicBoundaryConditions(system.use_pbc) aforce.setForceGroup(ForceGroup.ANGLE) omm_system.addForce(aforce) ### Set up constraints ################################################################# logger.info( f'Setting up {len(system.constrain_bonds)} bond constraints...') for bond in top.bonds: if id(bond) in system.constrain_bonds: omm_system.addConstraint(bond.atom1.id, bond.atom2.id, system.constrain_bonds[id(bond)]) logger.info( f'Setting up {len(system.constrain_angles)} angle constraints...') for angle in top.angles: if id(angle) in system.constrain_angles: omm_system.addConstraint(angle.atom1.id, angle.atom3.id, system.constrain_angles[id(angle)]) ### Set up dihedrals ################################################################### for dihedral_class in system.dihedral_classes: if dihedral_class == PeriodicDihedralTerm: logger.info('Setting up periodic dihedrals...') dforce = mm.PeriodicTorsionForce() for dihedral in top.dihedrals: dterm = system.dihedral_terms[id(dihedral)] ia1, ia2, ia3, ia4 = dihedral.atom1.id, dihedral.atom2.id, dihedral.atom3.id, dihedral.atom4.id if type(dterm) == PeriodicDihedralTerm: for par in dterm.parameters: dforce.addTorsion(ia1, ia2, ia3, ia4, par.n, par.phi * PI / 180, par.k) else: continue else: raise Exception( 'Dihedral terms other that PeriodicDihedralTerm ' 'haven\'t been implemented') dforce.setUsesPeriodicBoundaryConditions(system.use_pbc) dforce.setForceGroup(ForceGroup.DIHEDRAL) omm_system.addForce(dforce) ### Set up impropers #################################################################### for improper_class in system.improper_classes: if improper_class == OplsImproperTerm: logger.info('Setting up periodic impropers...') iforce = mm.CustomTorsionForce('k*(1-cos(2*theta))') iforce.addPerTorsionParameter('k') for improper in top.impropers: iterm = system.improper_terms[id(improper)] if type(iterm) == OplsImproperTerm: # in OPLS convention, the third atom is the central atom iforce.addTorsion(improper.atom2.id, improper.atom3.id, improper.atom1.id, improper.atom4.id, [iterm.k]) elif improper_class == HarmonicImproperTerm: logger.info('Setting up harmonic impropers...') iforce = mm.CustomTorsionForce(f'k*min(dtheta,2*pi-dtheta)^2;' f'dtheta=abs(theta-phi0);' f'pi={PI}') iforce.addPerTorsionParameter('phi0') iforce.addPerTorsionParameter('k') for improper in top.impropers: iterm = system.improper_terms[id(improper)] if type(iterm) == HarmonicImproperTerm: iforce.addTorsion(improper.atom1.id, improper.atom2.id, improper.atom3.id, improper.atom4.id, [iterm.phi * PI / 180, iterm.k]) else: raise Exception( 'Improper terms other that PeriodicImproperTerm and ' 'HarmonicImproperTerm haven\'t been implemented') iforce.setUsesPeriodicBoundaryConditions(system.use_pbc) iforce.setForceGroup(ForceGroup.IMPROPER) omm_system.addForce(iforce) ### Set up non-bonded interactions ######################################################### # NonbonedForce is not flexible enough. Use it only for Coulomb interactions (including 1-4 Coulomb exceptions) # CustomNonbondedForce handles vdW interactions (including 1-4 LJ exceptions) cutoff = ff.vdw_cutoff logger.info('Setting up Coulomb interactions...') nbforce = mm.NonbondedForce() if system.use_pbc: nbforce.setNonbondedMethod(mm.NonbondedForce.PME) nbforce.setEwaldErrorTolerance(5E-4) nbforce.setCutoffDistance(cutoff) # dispersion will be handled by CustomNonbondedForce nbforce.setUseDispersionCorrection(False) try: nbforce.setExceptionsUsePeriodicBoundaryConditions(True) except: logger.warning('Cannot apply PBC for Coulomb 1-4 exceptions') else: nbforce.setNonbondedMethod(mm.NonbondedForce.NoCutoff) nbforce.setForceGroup(ForceGroup.COULOMB) omm_system.addForce(nbforce) for atom in top.atoms: nbforce.addParticle(atom.charge, 1.0, 0.0) ### Set up vdW interactions ######################################################### atom_types = list(ff.atom_types.values()) type_names = list(ff.atom_types.keys()) n_type = len(atom_types) for vdw_class in system.vdw_classes: if vdw_class == LJ126Term: logger.info('Setting up LJ-12-6 vdW interactions...') if system.use_pbc and ff.vdw_long_range == ForceField.VDW_LONGRANGE_SHIFT: invRc6 = 1 / cutoff**6 cforce = mm.CustomNonbondedForce( f'A(type1,type2)*(invR6*invR6-{invRc6 * invRc6})-' f'B(type1,type2)*(invR6-{invRc6});' f'invR6=1/r^6') else: cforce = mm.CustomNonbondedForce( 'A(type1,type2)*invR6*invR6-B(type1,type2)*invR6;' 'invR6=1/r^6') cforce.addPerParticleParameter('type') A_list = [0.0] * n_type * n_type B_list = [0.0] * n_type * n_type for i, atype1 in enumerate(atom_types): for j, atype2 in enumerate(atom_types): vdw = ff.get_vdw_term(atype1, atype2) if type(vdw) == LJ126Term: A = 4 * vdw.epsilon * vdw.sigma**12 B = 4 * vdw.epsilon * vdw.sigma**6 else: A = B = 0 A_list[i + n_type * j] = A B_list[i + n_type * j] = B cforce.addTabulatedFunction( 'A', mm.Discrete2DFunction(n_type, n_type, A_list)) cforce.addTabulatedFunction( 'B', mm.Discrete2DFunction(n_type, n_type, B_list)) for atom in top.atoms: id_type = type_names.index(atom.type) cforce.addParticle([id_type]) elif vdw_class == MieTerm: logger.info('Setting up Mie vdW interactions...') if system.use_pbc and ff.vdw_long_range == ForceField.VDW_LONGRANGE_SHIFT: cforce = mm.CustomNonbondedForce( 'A(type1,type2)/r^REP(type1,type2)-' 'B(type1,type2)/r^ATT(type1,type2)-' 'SHIFT(type1,type2)') else: cforce = mm.CustomNonbondedForce( 'A(type1,type2)/r^REP(type1,type2)-' 'B(type1,type2)/r^ATT(type1,type2)') cforce.addPerParticleParameter('type') A_list = [0.0] * n_type * n_type B_list = [0.0] * n_type * n_type REP_list = [0.0] * n_type * n_type ATT_list = [0.0] * n_type * n_type SHIFT_list = [0.0] * n_type * n_type for i, atype1 in enumerate(atom_types): for j, atype2 in enumerate(atom_types): vdw = ff.get_vdw_term(atype1, atype2) if type(vdw) == MieTerm: A = vdw.factor_energy( ) * vdw.epsilon * vdw.sigma**vdw.repulsion B = vdw.factor_energy( ) * vdw.epsilon * vdw.sigma**vdw.attraction REP = vdw.repulsion ATT = vdw.attraction SHIFT = A / cutoff**REP - B / cutoff**ATT else: A = B = REP = ATT = SHIFT = 0 A_list[i + n_type * j] = A B_list[i + n_type * j] = B REP_list[i + n_type * j] = REP ATT_list[i + n_type * j] = ATT SHIFT_list[i + n_type * j] = SHIFT cforce.addTabulatedFunction( 'A', mm.Discrete2DFunction(n_type, n_type, A_list)) cforce.addTabulatedFunction( 'B', mm.Discrete2DFunction(n_type, n_type, B_list)) cforce.addTabulatedFunction( 'REP', mm.Discrete2DFunction(n_type, n_type, REP_list)) cforce.addTabulatedFunction( 'ATT', mm.Discrete2DFunction(n_type, n_type, ATT_list)) if system.use_pbc and ff.vdw_long_range == ForceField.VDW_LONGRANGE_SHIFT: cforce.addTabulatedFunction( 'SHIFT', mm.Discrete2DFunction(n_type, n_type, SHIFT_list)) for atom in top.atoms: id_type = type_names.index(atom.type) cforce.addParticle([id_type]) else: raise Exception('vdW terms other than LJ126Term and MieTerm ' 'haven\'t been implemented') if system.use_pbc: cforce.setNonbondedMethod( mm.CustomNonbondedForce.CutoffPeriodic) cforce.setCutoffDistance(cutoff) if ff.vdw_long_range == ForceField.VDW_LONGRANGE_CORRECT: cforce.setUseLongRangeCorrection(True) else: cforce.setNonbondedMethod(mm.CustomNonbondedForce.NoCutoff) cforce.setForceGroup(ForceGroup.VDW) omm_system.addForce(cforce) ### Set up 1-2, 1-3 and 1-4 exceptions ################################################## logger.info('Setting up 1-2, 1-3 and 1-4 exceptions...') custom_nb_forces = [ f for f in omm_system.getForces() if type(f) == mm.CustomNonbondedForce ] pair12, pair13, pair14 = top.get_12_13_14_pairs() for atom1, atom2 in pair12 + pair13: nbforce.addException(atom1.id, atom2.id, 0.0, 1.0, 0.0) for f in custom_nb_forces: f.addExclusion(atom1.id, atom2.id) # As long as 1-4 LJ OR Coulomb need to be scaled, then this pair should be excluded from ALL non-bonded forces. # This is required by OpenMM's internal implementation. # Even though NonbondedForce can handle 1-4 vdW, we use it only for 1-4 Coulomb. # And use CustomBondForce to handle 1-4 vdW, which makes it more clear for energy decomposition. if ff.scale_14_vdw != 1 or ff.scale_14_coulomb != 1: pair14_forces = {} # {VdwTerm: mm.NbForce} for atom1, atom2 in pair14: charge_prod = atom1.charge * atom2.charge * ff.scale_14_coulomb nbforce.addException(atom1.id, atom2.id, charge_prod, 1.0, 0.0) for f in custom_nb_forces: f.addExclusion(atom1.id, atom2.id) if ff.scale_14_vdw == 0: continue vdw = ff.get_vdw_term(ff.atom_types[atom1.type], ff.atom_types[atom2.type]) # We generalize LJ126Term and MieTerm because of minimal computational cost for 1-4 vdW if type(vdw) in (LJ126Term, MieTerm): cbforce = pair14_forces.get(MieTerm) if cbforce is None: cbforce = mm.CustomBondForce( 'C*epsilon*((sigma/r)^n-(sigma/r)^m);' 'C=n/(n-m)*(n/m)^(m/(n-m))') cbforce.addPerBondParameter('epsilon') cbforce.addPerBondParameter('sigma') cbforce.addPerBondParameter('n') cbforce.addPerBondParameter('m') cbforce.setUsesPeriodicBoundaryConditions( system.use_pbc) cbforce.setForceGroup(ForceGroup.VDW) omm_system.addForce(cbforce) pair14_forces[MieTerm] = cbforce epsilon = vdw.epsilon * ff.scale_14_vdw if type(vdw) == LJ126Term: cbforce.addBond(atom1.id, atom2.id, [epsilon, vdw.sigma, 12, 6]) elif type(vdw) == MieTerm: cbforce.addBond(atom1.id, atom2.id, [ epsilon, vdw.sigma, vdw.repulsion, vdw.attraction ]) else: raise Exception( '1-4 scaling for vdW terms other than LJ126Term and MieTerm ' 'haven\'t been implemented') ### Set up Drude particles ############################################################## for polar_class in system.polarizable_classes: if polar_class == DrudeTerm: logger.info('Setting up Drude polarizations...') pforce = mm.DrudeForce() pforce.setForceGroup(ForceGroup.DRUDE) omm_system.addForce(pforce) parent_idx_thole = { } # {parent: (index in DrudeForce, thole)} for addScreenPair for parent, drude in system.drude_pairs.items(): pterm = system.polarizable_terms[parent] n_H = len([ atom for atom in parent.bond_partners if atom.symbol == 'H' ]) alpha = pterm.alpha + n_H * pterm.merge_alpha_H idx = pforce.addParticle(drude.id, parent.id, -1, -1, -1, drude.charge, alpha, 0, 0) parent_idx_thole[parent] = (idx, pterm.thole) # exclude the non-boned interactions between Drude and parent # and those concerning Drude particles in 1-2 and 1-3 pairs # pairs formed by real atoms have already been handled above # also apply thole screening between 1-2 and 1-3 Drude dipole pairs drude_exclusions = list(system.drude_pairs.items()) for atom1, atom2 in pair12 + pair13: drude1 = system.drude_pairs.get(atom1) drude2 = system.drude_pairs.get(atom2) if drude1 is not None: drude_exclusions.append((drude1, atom2)) if drude2 is not None: drude_exclusions.append((atom1, drude2)) if drude1 is not None and drude2 is not None: drude_exclusions.append((drude1, drude2)) idx1, thole1 = parent_idx_thole[atom1] idx2, thole2 = parent_idx_thole[atom2] pforce.addScreenedPair(idx1, idx2, (thole1 + thole2) / 2) for a1, a2 in drude_exclusions: nbforce.addException(a1.id, a2.id, 0, 1.0, 0) for f in custom_nb_forces: f.addExclusion(a1.id, a2.id) # scale the non-boned interactions concerning Drude particles in 1-4 pairs # pairs formed by real atoms have already been handled above drude_exceptions14 = [] for atom1, atom2 in pair14: drude1 = system.drude_pairs.get(atom1) drude2 = system.drude_pairs.get(atom2) if drude1 is not None: drude_exceptions14.append((drude1, atom2)) if drude2 is not None: drude_exceptions14.append((atom1, drude2)) if drude1 is not None and drude2 is not None: drude_exceptions14.append((drude1, drude2)) for a1, a2 in drude_exceptions14: charge_prod = a1.charge * a2.charge * ff.scale_14_coulomb nbforce.addException(a1.id, a2.id, charge_prod, 1.0, 0.0) for f in custom_nb_forces: f.addExclusion(a1.id, a2.id) else: raise Exception( 'Polarizable terms other that DrudeTerm haven\'t been implemented' ) ### Set up virtual sites ################################################################ if top.has_virtual_site: logger.info('Setting up virtual sites...') for atom in top.atoms: vsite = atom.virtual_site if type(vsite) == TIP4PSite: O, H1, H2 = vsite.parents coeffs = system.get_TIP4P_linear_coeffs(atom) omm_vsite = mm.ThreeParticleAverageSite( O.id, H1.id, H2.id, *coeffs) omm_system.setVirtualSite(atom.id, omm_vsite) elif vsite is not None: raise Exception( 'Virtual sites other than TIP4PSite haven\'t been implemented' ) # exclude the non-boned interactions between virtual sites and parents # and particles (atoms, drude particles, virtual sites) in 1-2 and 1-3 pairs # TODO Assume no more than one virtual site is attached to each atom vsite_exclusions = list(system.vsite_pairs.items()) for atom, vsite in system.vsite_pairs.items(): drude = system.drude_pairs.get(atom) if drude is not None: vsite_exclusions.append((vsite, drude)) for atom1, atom2 in pair12 + pair13: vsite1 = system.vsite_pairs.get(atom1) vsite2 = system.vsite_pairs.get(atom2) drude1 = system.drude_pairs.get(atom1) drude2 = system.drude_pairs.get(atom2) if vsite1 is not None: vsite_exclusions.append((vsite1, atom2)) if drude2 is not None: vsite_exclusions.append((vsite1, drude2)) if vsite2 is not None: vsite_exclusions.append((vsite2, atom1)) if drude1 is not None: vsite_exclusions.append((vsite2, drude1)) if None not in [vsite1, vsite2]: vsite_exclusions.append((vsite1, vsite2)) for a1, a2 in vsite_exclusions: nbforce.addException(a1.id, a2.id, 0, 1.0, 0) for f in custom_nb_forces: f.addExclusion(a1.id, a2.id) # scale the non-boned interactions between virtual sites and particles in 1-4 pairs # TODO Assume no 1-4 LJ interactions on virtual sites vsite_exceptions14 = [] for atom1, atom2 in pair14: vsite1 = system.vsite_pairs.get(atom1) vsite2 = system.vsite_pairs.get(atom2) drude1 = system.drude_pairs.get(atom1) drude2 = system.drude_pairs.get(atom2) if vsite1 is not None: vsite_exceptions14.append((vsite1, atom2)) if drude2 is not None: vsite_exceptions14.append((vsite1, drude2)) if vsite2 is not None: vsite_exceptions14.append((vsite2, atom1)) if drude1 is not None: vsite_exceptions14.append((vsite2, drude1)) if None not in [vsite1, vsite2]: vsite_exceptions14.append((vsite1, vsite2)) for a1, a2 in vsite_exceptions14: charge_prod = a1.charge * a2.charge * ff.scale_14_coulomb nbforce.addException(a1.id, a2.id, charge_prod, 1.0, 0.0) for f in custom_nb_forces: f.addExclusion(a1.id, a2.id) ### Remove COM motion ################################################################### logger.info('Setting up COM motion remover...') omm_system.addForce(mm.CMMotionRemover(10)) return omm_system
def createSystem(self, nonbondedMethod=ff.NoCutoff, nonbondedCutoff=1.0 * unit.nanometer, constraints=None, rigidWater=True, implicitSolvent=None, soluteDielectric=1.0, solventDielectric=78.5, removeCMMotion=True, hydrogenMass=None, ewaldErrorTolerance=0.0005): """Construct an OpenMM System representing the topology described by this prmtop file. Parameters: - nonbondedMethod (object=NoCutoff) The method to use for nonbonded interactions. Allowed values are NoCutoff, CutoffNonPeriodic, CutoffPeriodic, Ewald, or PME. - nonbondedCutoff (distance=1*nanometer) The cutoff distance to use for nonbonded interactions - constraints (object=None) Specifies which bonds angles should be implemented with constraints. Allowed values are None, HBonds, AllBonds, or HAngles. - rigidWater (boolean=True) If true, water molecules will be fully rigid regardless of the value passed for the constraints argument - implicitSolvent (object=None) If not None, the implicit solvent model to use. Allowed values are HCT, OBC1, OBC2, GBn, or GBn2. - soluteDielectric (float=1.0) The solute dielectric constant to use in the implicit solvent model. - solventDielectric (float=78.5) The solvent dielectric constant to use in the implicit solvent model. - removeCMMotion (boolean=True) If true, a CMMotionRemover will be added to the System - hydrogenMass (mass=None) The mass to use for hydrogen atoms bound to heavy atoms. Any mass added to a hydrogen is subtracted from the heavy atom to keep their total mass the same. - ewaldErrorTolerance (float=0.0005) The error tolerance to use if nonbondedMethod is Ewald or PME. Returns: the newly created System """ methodMap = { ff.NoCutoff: 'NoCutoff', ff.CutoffNonPeriodic: 'CutoffNonPeriodic', ff.CutoffPeriodic: 'CutoffPeriodic', ff.Ewald: 'Ewald', ff.PME: 'PME' } if nonbondedMethod not in methodMap: raise ValueError('Illegal value for nonbonded method') if not self._prmtop.getIfBox() and nonbondedMethod in ( ff.CutoffPeriodic, ff.Ewald, ff.PME): raise ValueError( 'Illegal nonbonded method for a non-periodic system') constraintMap = { None: None, ff.HBonds: 'h-bonds', ff.AllBonds: 'all-bonds', ff.HAngles: 'h-angles' } if constraints is None: constraintString = None elif constraints in constraintMap: constraintString = constraintMap[constraints] else: raise ValueError('Illegal value for constraints') if implicitSolvent is None: implicitString = None elif implicitSolvent is HCT: implicitString = 'HCT' elif implicitSolvent is OBC1: implicitString = 'OBC1' elif implicitSolvent is OBC2: implicitString = 'OBC2' elif implicitSolvent is GBn: implicitString = 'GBn' elif implicitSolvent is GBn2: implicitString = 'GBn2' else: raise ValueError('Illegal value for implicit solvent model') sys = amber_file_parser.readAmberSystem( prmtop_loader=self._prmtop, shake=constraintString, nonbondedCutoff=nonbondedCutoff, nonbondedMethod=methodMap[nonbondedMethod], flexibleConstraints=False, gbmodel=implicitString, soluteDielectric=soluteDielectric, solventDielectric=solventDielectric, rigidWater=rigidWater, elements=self.elements) if hydrogenMass is not None: for atom1, atom2 in self.topology.bonds(): if atom1.element == elem.hydrogen: (atom1, atom2) = (atom2, atom1) if atom2.element == elem.hydrogen and atom1.element not in ( elem.hydrogen, None): transferMass = hydrogenMass - sys.getParticleMass( atom2.index) sys.setParticleMass(atom2.index, hydrogenMass) sys.setParticleMass( atom1.index, sys.getParticleMass(atom1.index) - transferMass) for force in sys.getForces(): if isinstance(force, mm.NonbondedForce): force.setEwaldErrorTolerance(ewaldErrorTolerance) if removeCMMotion: sys.addForce(mm.CMMotionRemover()) return sys