def getRaftlessGcode( gcodeText, raftlessPreferences = None ): "Raftless a gcode linear move text." if gcodec.isProcedureDone( gcodeText, 'raft' ): print( 'The gcode already contains a raft. Skipping raftless tool.' ) return gcodeText if gcodec.isProcedureDone( gcodeText, 'raftless' ): return gcodeText if raftlessPreferences == None: raftlessPreferences = RaftlessPreferences() preferences.readPreferences( raftlessPreferences ) if not raftlessPreferences.activateRaftless.value: return gcodeText skein = RaftlessSkein() skein.parseGcode( gcodeText, raftlessPreferences ) return skein.output.getvalue()
def getRaftlessGcode(gcodeText, raftlessPreferences=None):
"Raftless a gcode linear move text."
if gcodec.isProcedureDone(gcodeText, 'raft'):
print('The gcode already contains a raft. Skipping raftless tool.')
return gcodeText
if gcodec.isProcedureDone(gcodeText, 'raftless'):
return gcodeText
if raftlessPreferences == None:
raftlessPreferences = RaftlessPreferences()
preferences.readPreferences(raftlessPreferences)
if not raftlessPreferences.activateRaftless.value:
return gcodeText
skein = RaftlessSkein()
skein.parseGcode(gcodeText, raftlessPreferences)
return skein.output.getvalue()
def getTwitterbotChainGcode( fileName, gcodeText, twitterbotPreferences = None ): "Add Twitterbot M-code to a gcode text. Chain twitterbot the gcode if it is not already twitterbotted." gcodeText = gcodec.getGcodeFileText( fileName, gcodeText ) if not gcodec.isProcedureDone( gcodeText, 'unpause' ): gcodeText = unpause.getUnpauseChainGcode( fileName, gcodeText ) print( 'getTwitterbotChainGcode(fileName): ' + fileName ) return getTwitterbotGcode( gcodeText, fileName, twitterbotPreferences )
def getSequenceIndexPlusOneFromText(fileText):
"Get the profile sequence index of the file plus one. Return zero if the procedure is not in the file"
craftSequence = getReadCraftSequence()
for craftSequenceIndex in xrange(len(craftSequence) - 1, -1, -1):
procedure = craftSequence[craftSequenceIndex]
if gcodec.isProcedureDone(fileText, procedure):
return craftSequenceIndex + 1
return 0
def getInsetChainGcode( fileName, gcodeText, insetPreferences = None ): "Inset the carves of a gcode text. Chain inset the gcode if it is not already carved." if gcodeText == '': if fileName[ - len( '.svg' ) : ] == '.svg': gcodeText = gcodec.getFileText( fileName ) if not gcodec.isProcedureDone( gcodeText, '"carve"' ): #"carve" is used instead of carve because quotes have to be used for strings in svg files gcodeText = carve.getCarveGcode( fileName ) return getInsetGcode( gcodeText, insetPreferences )
def getSequenceIndexPlusOneFromText( fileText ): "Get the profile sequence index of the file plus one. Return zero if the procedure is not in the file" craftSequence = getReadCraftSequence() for craftSequenceIndex in xrange( len( craftSequence ) - 1, - 1, - 1 ): procedure = craftSequence[ craftSequenceIndex ] if gcodec.isProcedureDone( fileText, procedure ): return craftSequenceIndex + 1 return 0
def getChainTextFromProcedures( fileName, procedures, text ): "Get a crafted shape file from a list of procedures." lastProcedureTime = time.time() for procedure in procedures: craftModule = getCraftModule( procedure ) text = craftModule.getCraftedText( fileName, text ) if gcodec.isProcedureDone( text, procedure ): print( '%s procedure took %s seconds.' % ( procedure.capitalize(), int( round( time.time() - lastProcedureTime ) ) ) ) lastProcedureTime = time.time() return text
def getInsetChainGcode(fileName, gcodeText, insetPreferences=None):
"Inset the carves of a gcode text. Chain inset the gcode if it is not already carved."
if gcodeText == '':
if fileName[-len('.svg'):] == '.svg':
gcodeText = gcodec.getFileText(fileName)
if not gcodec.isProcedureDone(
gcodeText, '"carve"'
): #"carve" is used instead of carve because quotes have to be used for strings in svg files
gcodeText = carve.getCarveGcode(fileName)
return getInsetGcode(gcodeText, insetPreferences)
def getInsetGcode(gcodeText, insetPreferences=None):
"Inset the carves of a gcode text."
if gcodeText == '':
return ''
if gcodec.isProcedureDone(gcodeText, 'inset'):
return gcodeText
if insetPreferences == None:
insetPreferences = InsetPreferences()
preferences.readPreferences(insetPreferences)
skein = InsetSkein()
skein.parseGcode(insetPreferences, gcodeText)
return skein.output.getvalue()
def getInsetGcode( gcodeText, insetPreferences = None ): "Inset the carves of a gcode text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'inset' ): return gcodeText if insetPreferences == None: insetPreferences = InsetPreferences() preferences.readPreferences( insetPreferences ) skein = InsetSkein() skein.parseGcode( insetPreferences, gcodeText ) return skein.output.getvalue()
def writeOutput(fileName=''):
"""Export a gcode linear move file. Chain export the gcode if it is not already exported.
If no fileName is specified, export the first unmodified gcode file in this folder."""
if fileName == '':
unmodified = interpret.getGNUTranslatorFilesUnmodified()
if len(unmodified) == 0:
print("There are no unmodified gcode files in this folder.")
return
fileName = unmodified[0]
exportPreferences = ExportPreferences()
preferences.readPreferences(exportPreferences)
startTime = time.time()
print('File ' + gcodec.getSummarizedFilename(fileName) +
' is being chain exported.')
suffixFilename = fileName[:fileName.rfind(
'.')] + '.' + exportPreferences.fileExtension.value
gcodeText = gcodec.getGcodeFileText(fileName, '')
# if not gcodec.isProcedureDone( gcodeText, 'unpause' ):
# gcodeText = unpause.getUnpauseChainGcode( fileName, gcodeText )
if not gcodec.isProcedureDone(gcodeText, 'raftless'):
gcodeText = raftless.getRaftlessChainGcode(fileName, gcodeText)
if gcodeText == '':
return
# Now prepend the start file and append the end file
gcodeText = getStartText() + gcodeText + getEndText()
analyze.writeOutput(suffixFilename, gcodeText)
exportChainGcode = getExportGcode(gcodeText, exportPreferences)
replacableExportChainGcode = None
selectedPluginModule = getSelectedPlugin(exportPreferences)
if selectedPluginModule == None:
replacableExportChainGcode = exportChainGcode
else:
if selectedPluginModule.isReplacable():
replacableExportChainGcode = selectedPluginModule.getOutput(
exportChainGcode)
else:
selectedPluginModule.writeOutput(suffixFilename, exportChainGcode)
if replacableExportChainGcode != None:
replacableExportChainGcode = getReplaced(replacableExportChainGcode)
gcodec.writeFileText(suffixFilename, replacableExportChainGcode)
print('The exported file is saved as ' +
gcodec.getSummarizedFilename(suffixFilename))
if exportPreferences.alsoSendOutputTo.value != '':
if replacableExportChainGcode == None:
replacableExportChainGcode = selectedPluginModule.getOutput(
exportChainGcode)
exec('print >> ' + exportPreferences.alsoSendOutputTo.value +
', replacableExportChainGcode')
print('It took ' + str(int(round(time.time() - startTime))) +
' seconds to export the file.')
def getChainTextFromProcedures(fileName, procedures, text):
"Get a crafted shape file from a list of procedures."
lastProcedureTime = time.time()
for procedure in procedures:
craftModule = getCraftModule(procedure)
if craftModule != None:
text = craftModule.getCraftedText(fileName, text)
if gcodec.isProcedureDone(text, procedure):
print('%s procedure took %s seconds.' %
(procedure.capitalize(),
int(round(time.time() - lastProcedureTime))))
lastProcedureTime = time.time()
return text
def getHopGcode( gcodeText, hopPreferences = None ): "Hop a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'hop' ): return gcodeText if hopPreferences == None: hopPreferences = HopPreferences() preferences.readPreferences( hopPreferences ) if not hopPreferences.activateHop.value: return gcodeText skein = HopSkein() skein.parseGcode( gcodeText, hopPreferences ) return skein.output.getvalue()
def getTowerGcode( gcodeText, towerPreferences = None ): "Tower a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'tower' ): return gcodeText if towerPreferences == None: towerPreferences = TowerPreferences() preferences.readPreferences( towerPreferences ) if not towerPreferences.activateTower.value: return gcodeText skein = TowerSkein() skein.parseGcode( gcodeText, towerPreferences ) return skein.output.getvalue()
def getHopGcode(gcodeText, hopPreferences=None):
"Hop a gcode linear move text."
if gcodeText == '':
return ''
if gcodec.isProcedureDone(gcodeText, 'hop'):
return gcodeText
if hopPreferences == None:
hopPreferences = HopPreferences()
preferences.readPreferences(hopPreferences)
if not hopPreferences.activateHop.value:
return gcodeText
skein = HopSkein()
skein.parseGcode(gcodeText, hopPreferences)
return skein.output.getvalue()
def getStretchGcode( gcodeText, stretchPreferences = None ): "Stretch a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'stretch' ): return gcodeText if stretchPreferences == None: stretchPreferences = StretchPreferences() preferences.readPreferences( stretchPreferences ) if not stretchPreferences.activateStretch.value: return gcodeText skein = StretchSkein() skein.parseGcode( gcodeText, stretchPreferences ) return skein.output.getvalue()
def getUnpauseGcode(gcodeText, unpausePreferences=None):
"Unpause a gcode linear move text."
if gcodeText == '':
return ''
if gcodec.isProcedureDone(gcodeText, 'unpause'):
return gcodeText
if unpausePreferences == None:
unpausePreferences = UnpausePreferences()
preferences.readPreferences(unpausePreferences)
if not unpausePreferences.activateUnpause.value:
return gcodeText
skein = UnpauseSkein()
skein.parseGcode(unpausePreferences, gcodeText)
return skein.output.getvalue()
def getClipGcode( gcodeText, loopTailorPreferences = None ): "Clip a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'clip' ): return gcodeText if loopTailorPreferences == None: loopTailorPreferences = ClipPreferences() preferences.readPreferences( loopTailorPreferences ) if not loopTailorPreferences.activateClip.value: return gcodeText skein = ClipSkein() skein.parseGcode( gcodeText, loopTailorPreferences ) return skein.output.getvalue()
def getMultiplyGcode(gcodeText, multiplyPreferences=None):
"Multiply a gcode linear move text."
if gcodeText == '':
return ''
if gcodec.isProcedureDone(gcodeText, 'multiply'):
return gcodeText
if multiplyPreferences == None:
multiplyPreferences = MultiplyPreferences()
preferences.readPreferences(multiplyPreferences)
if not multiplyPreferences.activateMultiply.value:
return gcodeText
skein = MultiplySkein()
skein.parseGcode(gcodeText, multiplyPreferences)
return skein.output.getvalue()
def getExportGcode(gcodeText, exportPreferences=None):
"Export a gcode linear move text."
if gcodeText == '':
return ''
if gcodec.isProcedureDone(gcodeText, 'export'):
return gcodeText
if exportPreferences == None:
exportPreferences = ExportPreferences()
preferences.readPreferences(exportPreferences)
if not exportPreferences.activateExport.value:
return gcodeText
skein = ExportSkein()
skein.parseGcode(exportPreferences, gcodeText)
return skein.output.getvalue()
def getSpeedGcode(gcodeText, speedPreferences=None):
"Speed a gcode linear move text."
if gcodeText == "":
return ""
if gcodec.isProcedureDone(gcodeText, "speed"):
return gcodeText
if speedPreferences == None:
speedPreferences = SpeedPreferences()
preferences.readPreferences(speedPreferences)
if not speedPreferences.activateSpeed.value:
return gcodeText
skein = SpeedSkein()
skein.parseGcode(gcodeText, speedPreferences)
return skein.output.getvalue()
def getRaftGcode( gcodeText, raftPreferences = None ): "Raft a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'raft' ): return gcodeText if raftPreferences == None: raftPreferences = RaftPreferences() preferences.readPreferences( raftPreferences ) if not raftPreferences.activateRaft.value: return gcodeText skein = RaftSkein() skein.parseGcode( gcodeText, raftPreferences ) return skein.output.getvalue()
def getCombGcode(gcodeText, combPreferences=None):
"Comb a gcode linear move text."
if gcodeText == '':
return ''
if gcodec.isProcedureDone(gcodeText, 'comb'):
return gcodeText
if combPreferences == None:
combPreferences = CombPreferences()
preferences.readPreferences(combPreferences)
if not combPreferences.activateComb.value:
return gcodeText
skein = CombSkein()
skein.parseGcode(combPreferences, gcodeText)
return skein.output.getvalue()
def getWipeGcode(gcodeText, wipePreferences=None):
"Wipe a gcode linear move text."
if gcodeText == '':
return ''
if gcodec.isProcedureDone(gcodeText, 'wipe'):
return gcodeText
if wipePreferences == None:
wipePreferences = WipePreferences()
preferences.readPreferences(wipePreferences)
if not wipePreferences.activateWipe.value:
return gcodeText
skein = WipeSkein()
skein.parseGcode(gcodeText, wipePreferences)
return skein.output.getvalue()
def getMultiplyGcode( gcodeText, multiplyPreferences = None ): "Multiply a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'multiply' ): return gcodeText if multiplyPreferences == None: multiplyPreferences = MultiplyPreferences() preferences.readPreferences( multiplyPreferences ) if not multiplyPreferences.activateMultiply.value: return gcodeText skein = MultiplySkein() skein.parseGcode( gcodeText, multiplyPreferences ) return skein.output.getvalue()
def getOozebaneGcode( gcodeText, oozebanePreferences = None ): "Oozebane a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'oozebane' ): return gcodeText if oozebanePreferences == None: oozebanePreferences = OozebanePreferences() preferences.readPreferences( oozebanePreferences ) if not oozebanePreferences.activateOozebane.value: return gcodeText skein = OozebaneSkein() skein.parseGcode( gcodeText, oozebanePreferences ) return skein.output.getvalue()
def getExportGcode( gcodeText, exportPreferences = None ): "Export a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'export' ): return gcodeText if exportPreferences == None: exportPreferences = ExportPreferences() preferences.readPreferences( exportPreferences ) if not exportPreferences.activateExport.value: return gcodeText skein = ExportSkein() skein.parseGcode( exportPreferences, gcodeText ) return skein.output.getvalue()
def getUnpauseGcode( gcodeText, unpausePreferences = None ): "Unpause a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'unpause' ): return gcodeText if unpausePreferences == None: unpausePreferences = UnpausePreferences() preferences.readPreferences( unpausePreferences ) if not unpausePreferences.activateUnpause.value: return gcodeText skein = UnpauseSkein() skein.parseGcode( unpausePreferences, gcodeText ) return skein.output.getvalue()
def getWipeGcode( gcodeText, wipePreferences = None ): "Wipe a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'wipe' ): return gcodeText if wipePreferences == None: wipePreferences = WipePreferences() preferences.readPreferences( wipePreferences ) if not wipePreferences.activateWipe.value: return gcodeText skein = WipeSkein() skein.parseGcode( gcodeText, wipePreferences ) return skein.output.getvalue()
def getCoolGcode( gcodeText, coolPreferences = None ): "Cool a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'cool' ): return gcodeText if coolPreferences == None: coolPreferences = CoolPreferences() preferences.readPreferences( coolPreferences ) if not coolPreferences.activateCool.value: return gcodeText skein = CoolSkein() skein.parseGcode( gcodeText, coolPreferences ) return skein.output.getvalue()
def getStretchGcode(gcodeText, stretchPreferences=None):
"Stretch a gcode linear move text."
if gcodeText == '':
return ''
if gcodec.isProcedureDone(gcodeText, 'stretch'):
return gcodeText
if stretchPreferences == None:
stretchPreferences = StretchPreferences()
preferences.readPreferences(stretchPreferences)
if not stretchPreferences.activateStretch.value:
return gcodeText
skein = StretchSkein()
skein.parseGcode(gcodeText, stretchPreferences)
return skein.output.getvalue()
def getSpeedGcode(gcodeText, speedPreferences=None):
"Speed a gcode linear move text."
if gcodeText == '':
return ''
if gcodec.isProcedureDone(gcodeText, 'speed'):
return gcodeText
if speedPreferences == None:
speedPreferences = SpeedPreferences()
preferences.readPreferences(speedPreferences)
if not speedPreferences.activateSpeed.value:
return gcodeText
skein = SpeedSkein()
skein.parseGcode(gcodeText, speedPreferences)
return skein.output.getvalue()
def getTwitterbotGcode( gcodeText, fileName, twitterbotPreferences = None ): "Add Twitterbot M-code to a gcode text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'twitterbot' ): return gcodeText if twitterbotPreferences == None: twitterbotPreferences = TwitterbotPreferences() preferences.readPreferences( twitterbotPreferences ) if not twitterbotPreferences.activateTwitterbot.value: return gcodeText skein = TwitterbotSkein() skein.setGcodeFilePathAndName( fileName ) skein.parseGcode( gcodeText, twitterbotPreferences ) return skein.output.getvalue()
def writeOutput( fileName = '' ): """Export a gcode linear move file. Chain export the gcode if it is not already exported. If no fileName is specified, export the first unmodified gcode file in this folder.""" if fileName == '': unmodified = interpret.getGNUTranslatorFilesUnmodified() if len( unmodified ) == 0: print( "There are no unmodified gcode files in this folder." ) return fileName = unmodified[ 0 ] exportPreferences = ExportPreferences() preferences.readPreferences( exportPreferences ) startTime = time.time() print( 'File ' + gcodec.getSummarizedFilename( fileName ) + ' is being chain exported.' ) suffixFilename = fileName[ : fileName.rfind( '.' ) ] + '.' + exportPreferences.fileExtension.value gcodeText = gcodec.getGcodeFileText( fileName, '' ) # if not gcodec.isProcedureDone( gcodeText, 'unpause' ): # gcodeText = unpause.getUnpauseChainGcode( fileName, gcodeText ) if not gcodec.isProcedureDone( gcodeText, 'raftless' ): gcodeText = raftless.getRaftlessChainGcode( fileName, gcodeText ) if gcodeText == '': return # Now prepend the start file and append the end file gcodeText = getStartText() + gcodeText + getEndText() analyze.writeOutput( suffixFilename, gcodeText ) exportChainGcode = getExportGcode( gcodeText, exportPreferences ) replacableExportChainGcode = None selectedPluginModule = getSelectedPlugin( exportPreferences ) if selectedPluginModule == None: replacableExportChainGcode = exportChainGcode else: if selectedPluginModule.isReplacable(): replacableExportChainGcode = selectedPluginModule.getOutput( exportChainGcode ) else: selectedPluginModule.writeOutput( suffixFilename, exportChainGcode ) if replacableExportChainGcode != None: replacableExportChainGcode = getReplaced( replacableExportChainGcode ) gcodec.writeFileText( suffixFilename, replacableExportChainGcode ) print( 'The exported file is saved as ' + gcodec.getSummarizedFilename( suffixFilename ) ) if exportPreferences.alsoSendOutputTo.value != '': if replacableExportChainGcode == None: replacableExportChainGcode = selectedPluginModule.getOutput( exportChainGcode ) exec( 'print >> ' + exportPreferences.alsoSendOutputTo.value + ', replacableExportChainGcode' ) print( 'It took ' + str( int( round( time.time() - startTime ) ) ) + ' seconds to export the file.' )
def getFilletGcode( gcodeText, filletPreferences = None ): "Fillet a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'fillet' ): return gcodeText if filletPreferences == None: filletPreferences = FilletPreferences() preferences.readPreferences( filletPreferences ) if not filletPreferences.activateFillet.value: return gcodeText if filletPreferences.arcPoint.value: return getArcPointGcode( filletPreferences, gcodeText ) elif filletPreferences.arcRadius.value: return getArcRadiusGcode( filletPreferences, gcodeText ) elif filletPreferences.arcSegment.value: return getArcSegmentGcode( filletPreferences, gcodeText ) elif filletPreferences.bevel.value: return getBevelGcode( filletPreferences, gcodeText ) return gcodeText
def getClipChainGcode( fileName, gcodeText, loopTailorPreferences = None ): "Clip a gcode linear move text. Chain clip the gcode if it is not already clipped." gcodeText = gcodec.getGcodeFileText( fileName, gcodeText ) if not gcodec.isProcedureDone( gcodeText, 'comb' ): gcodeText = comb.getCombChainGcode( fileName, gcodeText ) return getClipGcode( gcodeText, loopTailorPreferences )
def getRaftlessChainGcode( fileName, gcodeText, raftlessPreferences = None ): "Raftless the file or text. Chain raftless the gcode if it is not already raftless'd." gcodeText = gcodec.getGcodeFileText( fileName, gcodeText ) if not gcodec.isProcedureDone( gcodeText, 'unpause' ): gcodeText = unpause.getUnpauseChainGcode( fileName, gcodeText ) return getRaftlessGcode( gcodeText, raftlessPreferences )
def getUnpauseChainGcode( fileName, gcodeText, unpausePreferences = None ): "Unpause a gcode linear move text. Chain unpause the gcode if it is not already unpaused." gcodeText = gcodec.getGcodeFileText( fileName, gcodeText ) if not gcodec.isProcedureDone( gcodeText, 'fillet' ): gcodeText = fillet.getFilletChainGcode( fileName, gcodeText ) return getUnpauseGcode( gcodeText, unpausePreferences )
def getWipeChainGcode(fileName, gcodeText, wipePreferences=None):
"Wipe a gcode linear move text. Chain wipe the gcode if it is not already wiped."
gcodeText = gcodec.getGcodeFileText(fileName, gcodeText)
if not gcodec.isProcedureDone(gcodeText, 'hop'):
gcodeText = hop.getHopChainGcode(fileName, gcodeText)
return getWipeGcode(gcodeText, wipePreferences)
def getMultiplyChainGcode( fileName, gcodeText, multiplyPreferences = None ): "Multiply a gcode linear move text. Chain multiply the gcode if it is not already multiplied." gcodeText = gcodec.getGcodeFileText( fileName, gcodeText ) if not gcodec.isProcedureDone( gcodeText, 'fill' ): gcodeText = fill.getFillChainGcode( fileName, gcodeText ) return getMultiplyGcode( gcodeText, multiplyPreferences )
def getHopChainGcode( fileName, gcodeText, hopPreferences = None ): "Hop a gcode linear move text. Chain hop the gcode if it is not already hopped." gcodeText = gcodec.getGcodeFileText( fileName, gcodeText ) if not gcodec.isProcedureDone( gcodeText, 'stretch' ): gcodeText = stretch.getStretchChainGcode( fileName, gcodeText ) return getHopGcode( gcodeText, hopPreferences )
def getRaftChainGcode( fileName, gcodeText, raftPreferences = None ): "Raft a gcode linear move text. Chain raft the gcode if it is not already rafted." gcodeText = gcodec.getGcodeFileText( fileName, gcodeText ) if not gcodec.isProcedureDone( gcodeText, 'speed' ): gcodeText = speed.getSpeedChainGcode( fileName, gcodeText ) return getRaftGcode( gcodeText, raftPreferences )
def getCombChainGcode(fileName, gcodeText, combPreferences=None):
"Comb a gcode linear move text. Chain comb the gcode if it is not already combed."
gcodeText = gcodec.getGcodeFileText(fileName, gcodeText)
if not gcodec.isProcedureDone(gcodeText, 'tower'):
gcodeText = tower.getTowerChainGcode(fileName, gcodeText)
return getCombGcode(gcodeText, combPreferences)
def getUnpauseChainGcode(fileName, gcodeText, unpausePreferences=None):
"Unpause a gcode linear move text. Chain unpause the gcode if it is not already unpaused."
gcodeText = gcodec.getGcodeFileText(fileName, gcodeText)
if not gcodec.isProcedureDone(gcodeText, 'fillet'):
gcodeText = fillet.getFilletChainGcode(fileName, gcodeText)
return getUnpauseGcode(gcodeText, unpausePreferences)
def getStretchChainGcode(fileName, gcodeText, stretchPreferences=None):
"Stretch a gcode linear move text. Chain stretch the gcode if it is not already stretched."
gcodeText = gcodec.getGcodeFileText(fileName, gcodeText)
if not gcodec.isProcedureDone(gcodeText, 'cool'):
gcodeText = cool.getCoolChainGcode(fileName, gcodeText)
return getStretchGcode(gcodeText, stretchPreferences)
def getFilletChainGcode( fileName, gcodeText, filletPreferences = None ): "Fillet a gcode linear move text. Chain oozebane the gcode if it is not already oozebaned." gcodeText = gcodec.getGcodeFileText( fileName, gcodeText ) if not gcodec.isProcedureDone( gcodeText, 'oozebane' ): gcodeText = oozebane.getOozebaneChainGcode( fileName, gcodeText ) return getFilletGcode( gcodeText, filletPreferences )
def getHopChainGcode(fileName, gcodeText, hopPreferences=None):
"Hop a gcode linear move text. Chain hop the gcode if it is not already hopped."
gcodeText = gcodec.getGcodeFileText(fileName, gcodeText)
if not gcodec.isProcedureDone(gcodeText, 'stretch'):
gcodeText = stretch.getStretchChainGcode(fileName, gcodeText)
return getHopGcode(gcodeText, hopPreferences)
def getSpeedChainGcode(fileName, gcodeText, speedPreferences=None):
"Speed a gcode linear move text. Chain speed the gcode if it is not already speeded."
gcodeText = gcodec.getGcodeFileText(fileName, gcodeText)
if not gcodec.isProcedureDone(gcodeText, 'multiply'):
gcodeText = multiply.getMultiplyChainGcode(fileName, gcodeText)
return getSpeedGcode(gcodeText, speedPreferences)
def getStretchChainGcode( fileName, gcodeText, stretchPreferences = None ): "Stretch a gcode linear move text. Chain stretch the gcode if it is not already stretched." gcodeText = gcodec.getGcodeFileText( fileName, gcodeText ) if not gcodec.isProcedureDone( gcodeText, 'cool' ): gcodeText = cool.getCoolChainGcode( fileName, gcodeText ) return getStretchGcode( gcodeText, stretchPreferences )
def getSpeedChainGcode(fileName, gcodeText, speedPreferences=None):
"Speed a gcode linear move text. Chain speed the gcode if it is not already speeded."
gcodeText = gcodec.getGcodeFileText(fileName, gcodeText)
if not gcodec.isProcedureDone(gcodeText, "multiply"):
gcodeText = multiply.getMultiplyChainGcode(fileName, gcodeText)
return getSpeedGcode(gcodeText, speedPreferences)
def getOozebaneChainGcode( fileName, gcodeText, oozebanePreferences = None ): "Oozebane a gcode linear move text. Chain oozebane the gcode if it is not already oozebaned." gcodeText = gcodec.getGcodeFileText( fileName, gcodeText ) if not gcodec.isProcedureDone( gcodeText, 'wipe' ): gcodeText = wipe.getWipeChainGcode( fileName, gcodeText ) return getOozebaneGcode( gcodeText, oozebanePreferences )
def getCoolChainGcode( fileName, gcodeText, coolPreferences = None ): "Cool a gcode linear move text. Chain cool the gcode if it is not already cooled." gcodeText = gcodec.getGcodeFileText( fileName, gcodeText ) if not gcodec.isProcedureDone( gcodeText, 'clip' ): gcodeText = clip.getClipChainGcode( fileName, gcodeText ) return getCoolGcode( gcodeText, coolPreferences )
