def test_default_value(self):
schema = Schema({
"key": str,
Optional('op_key'): Default(IntVal(min=10), default=50)
})
data = schema.validate({'key': 'abc'})
self.assertEqual({'key': 'abc', 'op_key': 50}, data)
data = schema.validate({'key': 'abc', 'op_key': 20})
self.assertEqual({'key': 'abc', 'op_key': 20}, data)
with self.assertRaises(SchemaError):
schema.validate({'key': 'abc', 'op_key': 0})
def __init__(self):
# need a mutex to protect create/delete bond interface
self.lock = lock()
self.support_fs_type = {}
self.conf_file = os.path.join(STORLEVER_CONF_DIR, FS_CONF_FILE_NAME)
self.fs_conf_schema = Schema({
"type": Use(str), # filesystem type
"dev_file": Use(str), # dev file
"dev_uuid": Use(str), # dev uuid
"mount_point": Use(str), # mount point of this fs,
"mount_option": Use(str), # mount option of this fs
"check_onboot": BoolVal(), # fsck fs on boot
Optional("comment"): Default(Use(str), default=""), # comment,
AutoDel(str): object # for all other key we auto delete
})
self.fs_dict_schema = Schema({
DoNotCare(str): self.fs_conf_schema
})
# sync fs conf to fstab on boot
self.sync_to_fstab()
from storlever.mngr.system.servicemgr import service_mgr
from storlever.mngr.system.modulemgr import ModuleManager
MODULE_INFO = {
"module_name": "zabbix_agent",
"rpms": ["zabbix-agent"],
"comment": "Provides the support of zabbix agent config for storlever"
}
ZABBIX_AGENT_CONF_FILE_NAME = "zabbix_agentd_conf.yaml"
ZABBIX_AGENT_ETC_CONF_DIR = "/etc/zabbix/"
ZABBIX_AGENT_CONF_FILE = "zabbix_agentd.conf"
ZABBIX_AGENT_CONF_SCHEMA = Schema({
Optional("hostname"):
Default(Use(str), default=""),
# How often list of active checks is refreshed, in seconds.
# Note that after failing to refresh active checks the next refresh
# will be attempted after 60 seconds.
Optional("refresh_active_check"):
Default(IntVal(min=60, max=3600), default=120),
# the server ip:port list for active check.zabbix_agent would get the active check list
# from each server at the refresh_active_check frequency. Entry string Format is IP:PORT
Optional("active_check_server_list"):
Default([Use(str)], default=[]),
# the server ip list for passive check. each passive check's source ip must
# exist in this list. Entry string Format is IP
Optional("passive_check_server_list"):
import re
import tarfile
import os
from storlever.lib.exception import StorLeverCmdError, StorLeverError
from storlever.lib.command import check_output
from storlever.lib.schema import Schema, Use, Optional, \
Default, DoNotCare, BoolVal, IntVal, AutoDel
MODULE_CONF_SCHEMA = Schema({
"module_name": Use(str),
Optional("rpms"): Default([Use(str)], default=[]),
Optional("extra_files"): Default([Use(str)], default=[]),
Optional("comment"): Default(Use(str), default=""),
AutoDel(str): object # for all other key we auto delete
})
RPM_CMD = "/bin/rpm"
class ModuleManager(object):
"""contains all methods to manage the storlever cfg"""
def __init__(self):
self.managed_modules = {}
@get_view(route_name='ntp_server_list')
def get_ntp_server_list(request):
ntp_mgr = ntpmgr.NtpManager
return ntp_mgr.get_server_conf_list()
ntp_server_list_schema = Schema([{
# it can be a ipv4 address, ipv6 address, or host dns name
"server_addr":
StrRe(r"^\S+$"),
# if set to True, it would be forced to resolve the host name to
# ipv6 address in DNS resolution
Optional("ipv6"):
Default(BoolVal(), default=False),
# Marks the server as preferred. All other things being equal,
# this host will be chosen for synchronization among set of correctly operating hosts
Optional("prefer"):
Default(BoolVal(), default=False),
# Specifies a mode number which is interpreted in a device
# specific fashion. For instance, it selects a dialing,
# protocol in the ACTS driver and a device subtype in the
# parse drivers.
# Only valid for reference clock server, i.e. server_addr is 127.127.t.n
Optional("mode"):
Default(IntVal(min=0, max=65535), default=0),
# Specifies the stratum number assigned to the driver, an
from storlever.mngr.system.servicemgr import service_mgr
SNMP_CONF_FILE_NAME = "snmp_conf.yaml"
SNMP_ETC_CONF_DIR = "/etc/snmp/"
SNMP_ETC_CONF_FILE = "snmpd.conf"
SNMP_MONITOR_CONF_SCHEMA = Schema({
# monitor name
"monitor_name":
Use(str),
# options to control the monitor's behavior,
# see monitor options section of man snmpd.conf for more detail
Optional("option"):
Default(Use(str), default=""),
# expression to check of this monitor,
# see monitor expression of man snmpd.conf for more detail
"expression":
Use(str),
AutoDel(str):
object # for all other key we auto delete
})
SNMP_SINK_CONF_SCHEMA = Schema({
# address of the host to which send the trap
"host":
Use(str),
"rpms": [
"vsftpd"
],
"comment": "Provides the management functions for FTP server"
}
FTP_CONF_FILE_NAME = "ftp_conf.yaml"
VSFTPD_ETC_CONF_DIR = "/etc/vsftpd/"
VSFTPD_ETC_CONF_FILE = "vsftpd.conf"
VSFTPD_ETC_USER_LIST = "user_list"
VSFTPD_ETC_CHROOT_LIST = "chroot_list"
FTP_USER_CONF_SCHEMA = Schema({
"user_name": Use(str),
# When enabled, the user can log in ftp
Optional("login_enable"): Default(BoolVal(), default=True),
# When enabled, the user will be placed into the chroot jail
Optional("chroot_enable"): Default(BoolVal(), default=False),
AutoDel(str): object # for all other key we auto delete
})
FTP_CONF_SCHEMA = Schema({
Optional("listen"): Default(BoolVal(), default=False), # ftp service listen on ipv4 port
Optional("listen6"): Default(BoolVal(), default=False), # ftp service listen on ipv6 port
Optional("listen_port"): Default(IntVal(min=1, max=65535), default=21), # ftp port number
# The maximum amount of time between commands from a remote client.
# Once triggered, the connection to the remote client is closed
Optional("idle_session_timeout"): Default(Use(int), default=300),
MODULE_INFO = {
"module_name": "mail",
"rpms": ["mailx"],
"comment": "Provides the support to send email by mailx utility"
}
MAIL_CONF_FILE_NAME = "mail_conf.yaml"
MAIL_ETC_CONF_DIR = "/etc/"
MAIL_ETC_CONF_FILE = "mail.rc"
MAIL_CMD = "/bin/mail"
MAIL_CONF_SCHEMA = Schema({
# the email address of user's account, it would also be place in the FROM header of the email
Optional("email_addr"):
Default(Use(str), default=""),
# smtp server address to send the mail
Optional("smtp_server"):
Default(Use(str), default=""),
# password for the account
Optional("password"):
Default(Use(str), default=""),
AutoDel(str):
object # for all other key we auto delete
})
class MailManager(object):
"""contains all methods to manage NTP server in linux system"""
scsi_list_dict.append(scsi_dev)
return scsi_list_dict
# http://192.168.1.10:6543/storlever/api/v1/block/scsi/host_list
@get_view(route_name='dev_host_list')
def host_list_get(request):
scsi_mgr = scsimgr.scsi_mgr()
scsi_list = scsi_mgr.get_scsi_host_list()
return scsi_list
scan_bus_schema = Schema({
Optional("opt"): StrRe(r"^(re_scan)$"),
Optional("host"): Default(ListVal(IntVal(0, 16)), default=[]),
Optional("channels"): Default(ListVal(IntVal(0, 1)), default=[]),
Optional("targets"): Default(ListVal(IntVal(0, 16)), default=[]),
Optional("luns"): Default(ListVal(IntVal(0, 7)), default=[]),
Optional("remove"): BoolVal(),
Optional("force_rescan"): BoolVal(),
Optional("force_remove"): BoolVal(),
DoNotCare(Use(str)): object # for all those key we don't care
})
# curl -v -X put -d opt=re_scan http://192.168.1.10:6543/storlever/api/v1/block/scsi/scan_bus
@put_view(route_name='scan_bus')
def scan_bus(request):
scsi_mgr = scsimgr.scsi_mgr()
params = get_params_from_request(request, scan_bus_schema)
remove = params.get("remove", False),
force_rescan = params.get("force_rescan", False),
NTP_CONF_FILE_NAME = "ntp_conf.yaml"
NTP_ETC_CONF_DIR = "/etc/"
NTP_ETC_CONF_FILE = "ntp.conf"
NTP_ETC_STORLEVER_CONF_DIR = "/etc/ntp/"
NTP_ETC_STORLEVER_CONF_FILE = "ntp.storlever.conf"
NTPQ_CMD = "/usr/sbin/ntpq"
NTP_SERVER_CONF_SCHEMA = Schema({
# it can be a ipv4 address, ipv6 address, or host dns name
"server_addr": Use(str),
# if set to True, it would be forced to resolve the host name to
# ipv6 address in DNS resolution
Optional("ipv6"): Default(BoolVal(), default=False),
# Marks the server as preferred. All other things being equal,
# this host will be chosen for synchronization among set of correctly operating hosts
Optional("prefer"): Default(BoolVal(), default=False),
# Specifies a mode number which is interpreted in a device
# specific fashion. For instance, it selects a dialing,
# protocol in the ACTS driver and a device subtype in the
# parse drivers.
# Only valid for reference clock server, i.e. server_addr is 127.127.t.n
Optional("mode"): Default(IntVal(min=0, max=65535), default=0),
# Specifies the stratum number assigned to the driver, an
# integer between 0 and 15. This number overrides the
cpus = sys_mgr.get_cpu_list()
cpu_list_dict = []
for cpu in cpus:
cpu_info = {
'processor': int(cpu["processor"]),
'model_name': cpu["model name"],
'cpu_MHz': float(cpu["cpu MHz"]),
'cache_size': cpu["cache size"]
}
cpu_list_dict.append(cpu_info)
return cpu_list_dict
cpu_persent_schema = Schema({
Optional("interval"):
Default(Use(float), default=1), # name should be string
DoNotCare(Use(str)):
object # for all those key we don't care
})
@get_view(route_name='cpu_percent')
def system_cpu_percent_get(request):
params = get_params_from_request(request, cpu_persent_schema)
cpu_percent = psutil.cpu_percent(interval=params["interval"])
return cpu_percent
@get_view(route_name='per_cpu_percent')
def system_per_cpu_percent_get(request):
params = get_params_from_request(request, cpu_persent_schema)
# You can also export directories to all hosts on an IP (sub-) network
# simultaneously. This is done by specifying an IP address and netmask
# pair as address/netmask where the netmask can be specified in dotted-
# decimal format, or as a contiguous mask length. For example, either
# 255.255.252.0 or 22 appended to the network base IPv4 address
# results in identical subnetworks with 10 bits of host. IPv6 addresses
# must use a contiguous mask length and must not be inside square brackets
# to avoid confusion with character-class wildcards. Wildcard characters
# generally do not work on IP addresses, though they may work by accident
# when reverse DNS lookups fail.
"host":
StrRe("^(\S)*$"),
# The options to be used for host
Optional("options"):
Default(StrRe("^(\S)*$"), default=""),
DoNotCare(Use(str)):
object # for all other key we don't care
})
nfs_export_schema = Schema({
# export point name
"name":
StrRe(r"^\w+$"),
# absolute path
Optional("path"):
StrRe(r"^\S+$"),
# client list for this export point
Optional("clients"): [nfs_client_schema],
#
# IP networks
# You can also export directories to all hosts on an IP (sub-) network
# simultaneously. This is done by specifying an IP address and netmask
# pair as address/netmask where the netmask can be specified in dotted-
# decimal format, or as a contiguous mask length. For example, either
# 255.255.252.0 or 22 appended to the network base IPv4 address
# results in identical subnetworks with 10 bits of host. IPv6 addresses
# must use a contiguous mask length and must not be inside square brackets
# to avoid confusion with character-class wildcards. Wildcard characters
# generally do not work on IP addresses, though they may work by accident
# when reverse DNS lookups fail.
"host": StrRe("^(\S)*$"),
# The options to be used for host
Optional("options"): Default(StrRe("^(\S)*$"), default=""),
AutoDel(str): object # for all other key we auto delete
})
EXPORT_POINT_CONF_SCHEMA = Schema({
# export point name
"name": Use(str),
# absolute path
"path": Use(str),
# client list for this export point
Optional("clients"): Default([EXPORT_CLIENT_CONF_SCHEMA],default=[]),
SMARTD_CONF_FILE_NAME = "smartd_conf.yaml"
SMARTD_ETC_CONF_DIR = "/etc/"
SMARTD_CONF_FILE = "smartd.conf"
MONITOR_CONF_SCHEMA = Schema({
# the dev's file to monitor
"dev":
Use(str),
# the (e)mail address to which smartd would send when a error is detected.
# To send email to more than one user, please use the following "comma separated"
# form for the address: user1@add1,user2@add2,...,userN@addN (with no spaces).
Optional("mail_to"):
Default(Use(str), default=""),
# test the mail. if true, send a single test email immediately upon smartd startup.
# This allows one to verify that email is delivered correctly
Optional("mail_test"):
Default(BoolVal(), default=False),
# run the executable PATH instead of the default mail command.
# if this list is empty, smartd would run the default "/bin/mail" utility
# to send warning email to user in "mail_to" option. Otherwise, smartd would run
# the scripts in this option. See man smartd.conf
# for more detail
Optional("mail_exec"):
Default(Use(str), default=""),
# Run Self-Tests or Offline Immediate Tests, at scheduled times. A Self- or
'/fs/list/{fsname}/quota_user/{user_name}') #put dete
config.add_route('share_list', '/fs/fs_list/{fs}/share_list')
#http://192.168.1.2:6543/storlever/api/v1/fs/type_list
@get_view(route_name='type_list')
def get_fs_type_list(request):
fs_mrg = fsmgr.fs_mgr()
type_list = fs_mrg.fs_type_list()
return type_list
mk_fs_schema = Schema({
"type": StrRe(r"^([a-zA-Z].+)$"),
"dev": StrRe(r"^(/dev/.+)$"),
Optional("options"): Default(StrRe(), default=""),
DoNotCare(Use(str)): object # for all those key we don't care
})
#curl -v -X POST -d type=ext4 -d dev=/dev/mapper/vg1-lv http://192.168.1.2:6543/storlever/api/v1/fs/mkfs
@post_view(route_name='mkfs')
def mk_fs(request):
fs_mrg = fsmgr.fs_mgr()
params = get_params_from_request(request, mk_fs_schema)
fs_mrg.mkfs_on_dev(params["type"], params["dev"], params["options"])
return Response(status=200)
#http://192.168.1.2:6543/storlever/api/v1/fs_list
@get_view(route_name='fs_list')
"like date, time, log, shutdown, reboot, and etc"
}
LOG_DIR = "/var/log"
LOG_FILE_PATH_PREFIX = "/tmp/syslog"
SELINUX_CONF_DIR = "/etc/selinux/"
SELINUX_CONF_FILE = "config"
ETC_HOSTS_FILE = "/etc/hosts"
ETC_NETWORK_FILE = "/etc/sysconfig/network"
HOST_LIST_SCHEMA = Schema([{
"addr": Use(str),
"hostname": Use(str),
Optional("alias"): Default(Use(str), default=""),
AutoDel(str): object # for all other key we auto delete
}])
class SysManager(object):
"""contains all methods to manage the system"""
def __init__(self):
self.dist_name = None
self.dist_version = None
self.dist_id = None
def system_restore_cb(self):
self.set_hostname("localhost", "System Restore")
def get_hostname(self):
def test_dict(self):
schema = Schema({
"key1":
str, # key1 should be string
"key2":
Use(int), # key3 should be in or int in string
"key3": [IntVal(min=10, max=20)],
# key4 is optional,
Optional("key4"):
str,
Optional('key5'):
Default(IntVal(min=100, max=200), default=100),
DoNotCare(str):
object # for all those key we don't care
})
data = schema.validate({
"key1": "abc",
"key2": '123',
"key3": [10, 15, 20],
"key5": 199,
})
self.assertEqual(data, {
"key1": "abc",
"key2": 123,
"key3": [10, 15, 20],
"key5": 199
})
data = schema.validate({
"key1": "abc",
"key2": '123',
"key3": [10, 15, 20],
})
self.assertEqual(data, {
"key1": "abc",
"key2": 123,
"key3": [10, 15, 20],
"key5": 100
})
data = schema.validate({
"key1": "abc",
"key2": '123',
"key3": [10, 15, 20],
"key4": 'abc'
})
self.assertEqual(
data, {
"key1": "abc",
"key2": 123,
"key3": [10, 15, 20],
"key4": 'abc',
"key5": 100
})
data = schema.validate({
"key1": "abc",
"key2": '123',
"key3": [10, 15, 20],
"key4": 'abc',
"key100": 'bbc',
'key200': [123, 23, 334]
})
self.assertEqual(
data, {
"key1": "abc",
"key2": 123,
"key3": [10, 15, 20],
"key4": 'abc',
"key5": 100,
"key100": 'bbc',
'key200': [123, 23, 334]
})
with self.assertRaises(SchemaError):
schema.validate({
'key1': 123,
"key2": '123',
"key3": [10, 15, 20],
"key4": 223,
})
with self.assertRaises(SchemaError):
schema.validate({
'key1': 123,
"key2": '123',
"key3": [10, 15, 20],
"key4": 'abc',
"key100": 'bbc',
'key200': [123, 23, 334]
})
with self.assertRaises(SchemaError):
schema.validate({
'key1': 'abc',
"key2": '123',
"key3": [10, 15, 20],
"key4": 'abc',
'key5': 0,
"key100": 'bbc',
'key200': [123, 23, 334]
})
'name': bond_object.name,
'mode': bond_object.mode,
'miimon': bond_object.miimon,
'slaves': bond_object.slaves
}
bond_info_dict.append(bond_info)
return bond_info_dict
bond_add_schema = Schema({
"mode":
IntVal(0, 6),
"miimon":
IntVal(0, 65535),
Optional("ifs"):
Default(ListVal(Use(str)), default=[]),
Optional("ip"):
Default(StrRe(r"^(|\d+\.\d+\.\d+\.\d+)$"), default=""), # ip addr
Optional("netmask"):
Default(StrRe(r"^(|\d+\.\d+\.\d+\.\d+)$"), default=""), # netmask addr
Optional("gateway"):
Default(StrRe(r"^(|\d+\.\d+\.\d+\.\d+)$"), default=""), # gateway addr
DoNotCare(Use(str)):
object # for all those key we don't care
})
#curl -v -X POST -d ifs=eth0,eth1 -d ip=192.168.1.123 -d netmask=255.255.255.0 -d mode=1 -d miimon=1000 -d gateway=192.168.1.1 http://192.168.1.123:6543/storlever/api/v1/network/bond/bond_list
@post_view(route_name='bond_list')
def add_bond_group(request):
params = get_params_from_request(request, bond_add_schema)
SMB_CONF_FILE_NAME = "smb_conf.yaml"
SMB_ETC_CONF_DIR = "/etc/samba/"
SMB_ETC_CONF_FILE = "smb.conf"
SMBSTATUS_CMD = "/usr/bin/smbstatus"
PDBEDIT_CMD = "/usr/bin/pdbedit"
SHARE_CONF_SCHEMA = Schema({
# Name of this share
"share_name":
Use(str),
# This parameter specifies a directory to which the user of the service is to
# be given access.default is empty
Optional("path"):
Default(Use(str), default=""),
# This is a text field that is seen next to a share when a client does a
# queries the server, either via the network neighborhood or via net view to
# list what shares are available. Default is empty
Optional("comment"):
Default(Use(str), default=""),
# When a file is created, the necessary permissions are calculated according
# to the mapping from DOS modes to UNIX permissions, and the resulting UNIX
# mode is then bit-wise ?AND?ed with this parameter. This parameter may be
# thought of as a bit-wise MASK for the UNIX modes of a file. Any bit not set
# here will be removed from the modes set on a file when it is created.
# Default is 0744, which means removes the group and other write and
# execute bits from the UNIX modes.
Optional("create_mask"):
for vg in vgs:
vg_info = {
'name': vgs[vg].name,
'uuid': vgs[vg].uuid,
'size': vgs[vg].size,
'free_size': vgs[vg].free_size,
}
vg_dict.append(vg_info)
return vg_dict
new_vg_schema = Schema({
"vgname":
StrRe(r"^([a-zA-Z].+)$"),
"dev":
Default(ListVal(StrRe(r"^(/dev/sd[a-z]|/dev/md.+)$")), default=[]),
DoNotCare(Use(str)):
object # for all those key we don't care
})
#curl -v -X POST -d vgname=vg1 -d dev=/dev/sdb,/dev/sdc http://192.168.1.123:6543/storlever/api/v1/block/lvm/vg_list
#enable eth* or disable eth*
@post_view(route_name='vg_list')
def create_vg(request):
lvm_mng = lvm.lvm_mgr()
params = get_params_from_request(request, new_vg_schema)
vg = lvm_mng.new_vg(params['vgname'], params['dev'])
if vg is None:
return Response(status=500)
"lun":
IntVal(1, 255),
# path to a regular file, or block device, or a sg char device
"path":
Use(str),
# the type of device . Possible device-types are:
# disk : emulate a disk device
# tape : emulate a tape reader
# ssc : same as tape
# cd : emulate a DVD drive
# changer : emulate a media changer device
# pt : passthrough type to export a /dev/sg device
Optional("device_type"):
Default(Use(str), default="disk"),
# the type of backend storage. Possible backend types are:
# rdwr : Use normal file I/O. This is the default for disk devices
# aio : Use Asynchronous I/O
# sg : Special backend type for passthrough devices
# ssc : Special backend type for tape emulation
Optional("bs_type"):
Default(Use(str), default="rdwr"),
# if true, a direct mapped logical unit (LUN) with the same properties as the
# physical device (such as VENDOR_ID, SERIAL_NUM, etc.)
Optional("direct_map"):
Default(BoolVal(), default=False),
# enable write cache or not
