def main():
"""main routine, signal/exception handling boilerplates"""
gconf.starttime = time.time()
set_term_handler()
GLogger.setup()
excont = FreeObject(exval=0)
try:
try:
main_i()
except:
log_raise_exception(excont)
finally:
finalize(exval=excont.exval)
def main():
"""main routine, signal/exception handling boilerplates"""
gconf.starttime = time.time()
set_term_handler()
GLogger.setup()
excont = FreeObject(exval = 0)
try:
try:
main_i()
except:
log_raise_exception(excont)
finally:
finalize(exval = excont.exval)
def terminate():
# relax one SIGTERM by setting a handler that sets back
# standard handler
set_term_handler(lambda *a: set_term_handler())
# give a chance to graceful exit
errno_wrap(os.kill, [-os.getpid(), signal.SIGTERM], [ESRCH])
def main():
rconf.starttime = time.time()
# If old Glusterd sends commands in old format, below function
# converts the sys.argv to new format. This conversion is added
# temporarily for backward compatibility. This can be removed
# once integrated with Glusterd2
# This modifies sys.argv globally, so rest of the code works as usual
argsupgrade.upgrade()
# Default argparse version handler prints to stderr, which is fixed in
# 3.x series but not in 2.x, using custom parser to fix this issue
if "--version" in sys.argv:
print(GSYNCD_VERSION)
sys.exit(0)
parser = ArgumentParser()
parser.add_argument("--inet6", action="store_true")
sp = parser.add_subparsers(dest="subcmd")
# Monitor Status File update
p = sp.add_parser("monitor-status")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave details user@host::vol format")
p.add_argument("status", help="Update Monitor Status")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--debug", action="store_true")
# Monitor
p = sp.add_parser("monitor")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave details user@host::vol format")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--pause-on-start",
action="store_true",
help="Start with Paused state")
p.add_argument("--local-node-id", help="Local Node ID")
p.add_argument("--debug", action="store_true")
p.add_argument("--use-gconf-volinfo", action="store_true")
# Worker
p = sp.add_parser("worker")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave details user@host::vol format")
p.add_argument("--local-path", help="Local Brick Path")
p.add_argument("--feedback-fd",
type=int,
help="feedback fd between monitor and worker")
p.add_argument("--local-node", help="Local master node")
p.add_argument("--local-node-id", help="Local Node ID")
p.add_argument("--rpc-fd",
help="Read and Write fds for worker-agent communication")
p.add_argument("--subvol-num", type=int, help="Subvolume number")
p.add_argument("--is-hottier",
action="store_true",
help="Is this brick part of hot tier")
p.add_argument("--resource-remote",
help="Remote node to connect to Slave Volume")
p.add_argument("--resource-remote-id",
help="Remote node ID to connect to Slave Volume")
p.add_argument("--slave-id", help="Slave Volume ID")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--debug", action="store_true")
# Agent
p = sp.add_parser("agent")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave details user@host::vol format")
p.add_argument("--local-path", help="Local brick path")
p.add_argument("--local-node", help="Local master node")
p.add_argument("--local-node-id", help="Local Node ID")
p.add_argument("--slave-id", help="Slave Volume ID")
p.add_argument("--rpc-fd",
help="Read and Write fds for worker-agent communication")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--debug", action="store_true")
# Slave
p = sp.add_parser("slave")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave details user@host::vol format")
p.add_argument("--session-owner")
p.add_argument("--master-brick",
help="Master brick which is connected to the Slave")
p.add_argument("--master-node",
help="Master node which is connected to the Slave")
p.add_argument("--master-node-id",
help="Master node ID which is connected to the Slave")
p.add_argument("--local-node", help="Local Slave node")
p.add_argument("--local-node-id", help="Local Slave ID")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--debug", action="store_true")
# All configurations which are configured via "slave-" options
# DO NOT add default values for these configurations, default values
# will be picked from template config file
p.add_argument("--slave-timeout",
type=int,
help="Timeout to end gsyncd at Slave side")
p.add_argument("--use-rsync-xattrs", action="store_true")
p.add_argument("--slave-log-level", help="Slave Gsyncd Log level")
p.add_argument("--slave-gluster-log-level",
help="Slave Gluster mount Log level")
p.add_argument("--slave-gluster-command-dir",
help="Directory where Gluster binaries exist on slave")
p.add_argument("--slave-access-mount",
action="store_true",
help="Do not lazy umount the slave volume")
# Status
p = sp.add_parser("status")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--local-path", help="Local Brick Path")
p.add_argument("--debug", action="store_true")
p.add_argument("--json", action="store_true")
# Config-check
p = sp.add_parser("config-check")
p.add_argument("name", help="Config Name")
p.add_argument("--value", help="Config Value")
p.add_argument("--debug", action="store_true")
# Config-get
p = sp.add_parser("config-get")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave")
p.add_argument("--name", help="Config Name")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--debug", action="store_true")
p.add_argument("--show-defaults", action="store_true")
p.add_argument("--only-value", action="store_true")
p.add_argument("--use-underscore", action="store_true")
p.add_argument("--json", action="store_true")
# Config-set
p = sp.add_parser("config-set")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave")
p.add_argument("-n", "--name", help="Config Name")
p.add_argument("-v", "--value", help="Config Value")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--debug", action="store_true")
# Config-reset
p = sp.add_parser("config-reset")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave")
p.add_argument("name", help="Config Name")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--debug", action="store_true")
# voluuidget
p = sp.add_parser("voluuidget")
p.add_argument("host", help="Hostname")
p.add_argument("volname", help="Volume Name")
p.add_argument("--debug", action="store_true")
# Delete
p = sp.add_parser("delete")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument('--path', dest='paths', action="append")
p.add_argument("--reset-sync-time",
action="store_true",
help="Reset Sync Time")
p.add_argument("--debug", action="store_true")
# Parse arguments
args = parser.parse_args()
# Extra template values, All arguments are already part of template
# variables, use this for adding extra variables
extra_tmpl_args = {}
# Add First/Primary Slave host, user and volume
if getattr(args, "slave", None) is not None:
hostdata, slavevol = args.slave.split("::")
hostdata = hostdata.split("@")
slavehost = hostdata[-1]
slaveuser = "******"
if len(hostdata) == 2:
slaveuser = hostdata[0]
extra_tmpl_args["primary_slave_host"] = slavehost
extra_tmpl_args["slaveuser"] = slaveuser
extra_tmpl_args["slavevol"] = slavevol
# Add Bricks encoded path
if getattr(args, "local_path", None) is not None:
extra_tmpl_args["local_id"] = escape(args.local_path)
# Add Master Bricks encoded path(For Slave)
if getattr(args, "master_brick", None) is not None:
extra_tmpl_args["master_brick_id"] = escape(args.master_brick)
# Load configurations
config_file = getattr(args, "config_file", None)
# Subcmd accepts config file argument but not passed
# Set default path for config file in that case
# If an subcmd accepts config file then it also accepts
# master and Slave arguments.
if config_file is None and hasattr(args, "config_file"):
config_file = "%s/geo-replication/%s_%s_%s/gsyncd.conf" % (
GLUSTERD_WORKDIR, args.master,
extra_tmpl_args["primary_slave_host"], extra_tmpl_args["slavevol"])
# If Config file path not exists, log error and continue using default conf
config_file_error_msg = None
if config_file is not None and not os.path.exists(config_file):
# Logging not yet initialized, create the error message to
# log later and reset the config_file to None
config_file_error_msg = lf(
"Session config file not exists, using the default config",
path=config_file)
config_file = None
rconf.config_file = config_file
# Override gconf values from argument values only if it is slave gsyncd
override_from_args = False
if args.subcmd == "slave":
override_from_args = True
if args.subcmd == "monitor":
ret = gconf.is_config_file_old(config_file, args.master,
extra_tmpl_args["slavevol"])
if ret is not None:
gconf.config_upgrade(config_file, ret)
# Load Config file
gconf.load(GLUSTERFS_CONFDIR + "/gsyncd.conf", config_file, vars(args),
extra_tmpl_args, override_from_args)
# Default label to print in log file
label = args.subcmd
if args.subcmd in ("worker", "agent"):
# If Worker or agent, then add brick path also to label
label = "%s %s" % (args.subcmd, args.local_path)
elif args.subcmd == "slave":
# If Slave add Master node and Brick details
label = "%s %s%s" % (args.subcmd, args.master_node, args.master_brick)
# Setup Logger
# Default log file
log_file = gconf.get("cli-log-file")
log_level = gconf.get("cli-log-level")
if getattr(args, "master", None) is not None and \
getattr(args, "slave", None) is not None:
log_file = gconf.get("log-file")
log_level = gconf.get("log-level")
# Use different log file location for Slave log file
if args.subcmd == "slave":
log_file = gconf.get("slave-log-file")
log_level = gconf.get("slave-log-level")
if args.debug:
log_file = "-"
log_level = "DEBUG"
# Create Logdir if not exists
try:
if log_file != "-":
os.mkdir(os.path.dirname(log_file))
except OSError as e:
if e.errno != EEXIST:
raise
setup_logging(log_file=log_file, level=log_level, label=label)
if config_file_error_msg is not None:
logging.warn(config_file_error_msg)
# Log message for loaded config file
if config_file is not None:
logging.info(lf("Using session config file", path=config_file))
set_term_handler()
excont = FreeObject(exval=0)
# Gets the function name based on the input argument. For example
# if subcommand passed as argument is monitor then it looks for
# function with name "subcmd_monitor" in subcmds file
func = getattr(subcmds, "subcmd_" + args.subcmd.replace("-", "_"), None)
try:
try:
if func is not None:
rconf.args = args
func(args)
except:
log_raise_exception(excont)
finally:
finalize(exval=excont.exval)
def terminate():
# relax one SIGTERM by setting a handler that sets back
# standard handler
set_term_handler(lambda *a: set_term_handler())
# give a chance to graceful exit
os.kill(-os.getpid(), signal.SIGTERM)
def main():
rconf.starttime = time.time()
# If old Glusterd sends commands in old format, below function
# converts the sys.argv to new format. This conversion is added
# temporarily for backward compatibility. This can be removed
# once integrated with Glusterd2
# This modifies sys.argv globally, so rest of the code works as usual
argsupgrade.upgrade()
# Default argparse version handler prints to stderr, which is fixed in
# 3.x series but not in 2.x, using custom parser to fix this issue
if "--version" in sys.argv:
print(GSYNCD_VERSION)
sys.exit(0)
parser = ArgumentParser()
parser.add_argument("--inet6", action="store_true")
sp = parser.add_subparsers(dest="subcmd")
# Monitor Status File update
p = sp.add_parser("monitor-status")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave details user@host::vol format")
p.add_argument("status", help="Update Monitor Status")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--debug", action="store_true")
# Monitor
p = sp.add_parser("monitor")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave details user@host::vol format")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--pause-on-start",
action="store_true",
help="Start with Paused state")
p.add_argument("--local-node-id", help="Local Node ID")
p.add_argument("--debug", action="store_true")
p.add_argument("--use-gconf-volinfo", action="store_true")
# Worker
p = sp.add_parser("worker")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave details user@host::vol format")
p.add_argument("--local-path", help="Local Brick Path")
p.add_argument("--feedback-fd", type=int,
help="feedback fd between monitor and worker")
p.add_argument("--local-node", help="Local master node")
p.add_argument("--local-node-id", help="Local Node ID")
p.add_argument("--rpc-fd",
help="Read and Write fds for worker-agent communication")
p.add_argument("--subvol-num", type=int, help="Subvolume number")
p.add_argument("--is-hottier", action="store_true",
help="Is this brick part of hot tier")
p.add_argument("--resource-remote",
help="Remote node to connect to Slave Volume")
p.add_argument("--resource-remote-id",
help="Remote node ID to connect to Slave Volume")
p.add_argument("--slave-id", help="Slave Volume ID")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--debug", action="store_true")
# Agent
p = sp.add_parser("agent")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave details user@host::vol format")
p.add_argument("--local-path", help="Local brick path")
p.add_argument("--local-node", help="Local master node")
p.add_argument("--local-node-id", help="Local Node ID")
p.add_argument("--slave-id", help="Slave Volume ID")
p.add_argument("--rpc-fd",
help="Read and Write fds for worker-agent communication")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--debug", action="store_true")
# Slave
p = sp.add_parser("slave")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave details user@host::vol format")
p.add_argument("--session-owner")
p.add_argument("--master-brick",
help="Master brick which is connected to the Slave")
p.add_argument("--master-node",
help="Master node which is connected to the Slave")
p.add_argument("--master-node-id",
help="Master node ID which is connected to the Slave")
p.add_argument("--local-node", help="Local Slave node")
p.add_argument("--local-node-id", help="Local Slave ID")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--debug", action="store_true")
# All configurations which are configured via "slave-" options
# DO NOT add default values for these configurations, default values
# will be picked from template config file
p.add_argument("--slave-timeout", type=int,
help="Timeout to end gsyncd at Slave side")
p.add_argument("--use-rsync-xattrs", action="store_true")
p.add_argument("--slave-log-level", help="Slave Gsyncd Log level")
p.add_argument("--slave-gluster-log-level",
help="Slave Gluster mount Log level")
p.add_argument("--slave-gluster-command-dir",
help="Directory where Gluster binaries exist on slave")
p.add_argument("--slave-access-mount", action="store_true",
help="Do not lazy umount the slave volume")
# Status
p = sp.add_parser("status")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--local-path", help="Local Brick Path")
p.add_argument("--debug", action="store_true")
p.add_argument("--json", action="store_true")
# Config-check
p = sp.add_parser("config-check")
p.add_argument("name", help="Config Name")
p.add_argument("--value", help="Config Value")
p.add_argument("--debug", action="store_true")
# Config-get
p = sp.add_parser("config-get")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave")
p.add_argument("--name", help="Config Name")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--debug", action="store_true")
p.add_argument("--show-defaults", action="store_true")
p.add_argument("--only-value", action="store_true")
p.add_argument("--use-underscore", action="store_true")
p.add_argument("--json", action="store_true")
# Config-set
p = sp.add_parser("config-set")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave")
p.add_argument("-n", "--name", help="Config Name")
p.add_argument("-v", "--value", help="Config Value")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--debug", action="store_true")
# Config-reset
p = sp.add_parser("config-reset")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave")
p.add_argument("name", help="Config Name")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument("--debug", action="store_true")
# voluuidget
p = sp.add_parser("voluuidget")
p.add_argument("host", help="Hostname")
p.add_argument("volname", help="Volume Name")
p.add_argument("--debug", action="store_true")
# Delete
p = sp.add_parser("delete")
p.add_argument("master", help="Master Volume Name")
p.add_argument("slave", help="Slave")
p.add_argument("-c", "--config-file", help="Config File")
p.add_argument('--path', dest='paths', action="append")
p.add_argument("--reset-sync-time", action="store_true",
help="Reset Sync Time")
p.add_argument("--debug", action="store_true")
# Parse arguments
args = parser.parse_args()
# Extra template values, All arguments are already part of template
# variables, use this for adding extra variables
extra_tmpl_args = {}
# Add First/Primary Slave host, user and volume
if getattr(args, "slave", None) is not None:
hostdata, slavevol = args.slave.split("::")
hostdata = hostdata.split("@")
slavehost = hostdata[-1]
slaveuser = "******"
if len(hostdata) == 2:
slaveuser = hostdata[0]
extra_tmpl_args["primary_slave_host"] = slavehost
extra_tmpl_args["slaveuser"] = slaveuser
extra_tmpl_args["slavevol"] = slavevol
# Add Bricks encoded path
if getattr(args, "local_path", None) is not None:
extra_tmpl_args["local_id"] = escape(args.local_path)
# Add Master Bricks encoded path(For Slave)
if getattr(args, "master_brick", None) is not None:
extra_tmpl_args["master_brick_id"] = escape(args.master_brick)
# Load configurations
config_file = getattr(args, "config_file", None)
# Subcmd accepts config file argument but not passed
# Set default path for config file in that case
# If an subcmd accepts config file then it also accepts
# master and Slave arguments.
if config_file is None and hasattr(args, "config_file"):
config_file = "%s/geo-replication/%s_%s_%s/gsyncd.conf" % (
GLUSTERD_WORKDIR,
args.master,
extra_tmpl_args["primary_slave_host"],
extra_tmpl_args["slavevol"])
# If Config file path not exists, log error and continue using default conf
config_file_error_msg = None
if config_file is not None and not os.path.exists(config_file):
# Logging not yet initialized, create the error message to
# log later and reset the config_file to None
config_file_error_msg = lf(
"Session config file not exists, using the default config",
path=config_file)
config_file = None
rconf.config_file = config_file
# Override gconf values from argument values only if it is slave gsyncd
override_from_args = False
if args.subcmd == "slave":
override_from_args = True
# Load Config file
gconf.load(GLUSTERFS_CONFDIR + "/gsyncd.conf",
config_file,
vars(args),
extra_tmpl_args,
override_from_args)
# Default label to print in log file
label = args.subcmd
if args.subcmd in ("worker", "agent"):
# If Worker or agent, then add brick path also to label
label = "%s %s" % (args.subcmd, args.local_path)
elif args.subcmd == "slave":
# If Slave add Master node and Brick details
label = "%s %s%s" % (args.subcmd, args.master_node, args.master_brick)
# Setup Logger
# Default log file
log_file = gconf.get("cli-log-file")
log_level = gconf.get("cli-log-level")
if getattr(args, "master", None) is not None and \
getattr(args, "slave", None) is not None:
log_file = gconf.get("log-file")
log_level = gconf.get("log-level")
# Use different log file location for Slave log file
if args.subcmd == "slave":
log_file = gconf.get("slave-log-file")
log_level = gconf.get("slave-log-level")
if args.debug:
log_file = "-"
log_level = "DEBUG"
# Create Logdir if not exists
try:
if log_file != "-":
os.mkdir(os.path.dirname(log_file))
except OSError as e:
if e.errno != EEXIST:
raise
setup_logging(
log_file=log_file,
level=log_level,
label=label
)
if config_file_error_msg is not None:
logging.warn(config_file_error_msg)
# Log message for loaded config file
if config_file is not None:
logging.info(lf("Using session config file", path=config_file))
set_term_handler()
excont = FreeObject(exval=0)
# Gets the function name based on the input argument. For example
# if subcommand passed as argument is monitor then it looks for
# function with name "subcmd_monitor" in subcmds file
func = getattr(subcmds, "subcmd_" + args.subcmd.replace("-", "_"), None)
try:
try:
if func is not None:
rconf.args = args
func(args)
except:
log_raise_exception(excont)
finally:
finalize(exval=excont.exval)
def monitor(self):
"""the monitor loop
Basic logic is a blantantly simple blunt heuristics:
if spawned client survives 60 secs, it's considered OK.
This servers us pretty well as it's not vulneralbe to
any kind of irregular behavior of the child...
... well, except for one: if children is hung up on
waiting for some event, it can survive aeons, still
will be defunct. So we tweak the above logic to
expect the worker to send us a signal within 60 secs
(in the form of closing its end of a pipe). The worker
does this when it's done with the setup stage
ready to enter the service loop (note it's the setup
stage which is vulnerable to hangs -- the full
blown worker blows up on EPIPE if the net goes down,
due to the keep-alive thread)
"""
def sigcont_handler(*a):
"""
Re-init logging and send group kill signal
"""
md = gconf.log_metadata
logging.shutdown()
lcls = logging.getLoggerClass()
lcls.setup(label=md.get('saved_label'), **md)
pid = os.getpid()
os.kill(-pid, signal.SIGUSR1)
signal.signal(signal.SIGUSR1, lambda *a: ())
signal.signal(signal.SIGCONT, sigcont_handler)
argv = sys.argv[:]
for o in ('-N', '--no-daemon', '--monitor'):
while o in argv:
argv.remove(o)
argv.extend(('-N', '-p', ''))
argv.insert(0, os.path.basename(sys.executable))
self.set_state('starting...')
ret = 0
def nwait(p, o=0):
p2, r = waitpid(p, o)
if not p2:
return
return r
def exit_signalled(s):
""" child teminated due to receipt of SIGUSR1 """
return (os.WIFSIGNALED(s) and (os.WTERMSIG(s) == signal.SIGUSR1))
def exit_status(s):
if os.WIFEXITED(s):
return os.WEXITSTATUS(s)
return 1
conn_timeout = int(gconf.connection_timeout)
while ret in (0, 1):
logging.info('-' * conn_timeout)
logging.info('starting gsyncd worker')
pr, pw = os.pipe()
cpid = os.fork()
if cpid == 0:
os.close(pr)
os.execv(sys.executable, argv + ['--feedback-fd', str(pw)])
os.close(pw)
t0 = time.time()
so = select((pr,), (), (), conn_timeout)[0]
os.close(pr)
if so:
ret = nwait(cpid, os.WNOHANG)
if ret != None:
logging.debug("worker died before establishing connection")
else:
logging.debug("worker seems to be connected (?? racy check)")
while time.time() < t0 + conn_timeout:
ret = nwait(cpid, os.WNOHANG)
if ret != None:
logging.debug("worker died in startup phase")
break
time.sleep(1)
else:
logging.debug("worker not confirmed in %d sec, aborting it" % \
conn_timeout)
# relax one SIGTERM by setting a handler that sets back
# standard handler
set_term_handler(lambda *a: set_term_handler())
# give a chance to graceful exit
os.kill(-os.getpid(), signal.SIGTERM)
time.sleep(1)
os.kill(cpid, signal.SIGKILL)
ret = nwait(cpid)
if ret == None:
self.set_state('OK')
ret = nwait(cpid)
if exit_signalled(ret):
ret = 0
else:
ret = exit_status(ret)
if ret in (0,1):
self.set_state('faulty')
time.sleep(10)
self.set_state('inconsistent')
return ret
