def sendSysinfo(self, full):
self.send(NUM_SYSINFO_REPLY_START)
self.send(NUM_SYSINFO_REPLY_LINE, "program_version", VERSION)
self.send(NUM_SYSINFO_REPLY_LINE, "battery", sysinfo.battery())
self.send(NUM_SYSINFO_REPLY_LINE, "active_profile", sysinfo.active_profile())
self.send(NUM_SYSINFO_REPLY_LINE, "free_ram", sysinfo.free_ram())
self.send(NUM_SYSINFO_REPLY_LINE, "pys60_version", e32.pys60_version)
if sysinfo.active_profile() == u"offline":
# Return an error code if the phone is in offline mode
self.send(NUM_SYSINFO_REPLY_LINE, "signal_dbm", -1)
self.send(NUM_SYSINFO_REPLY_LINE, "signal_bars", -1)
else:
self.send(NUM_SYSINFO_REPLY_LINE, "signal_dbm", sysinfo.signal_dbm())
self.send(NUM_SYSINFO_REPLY_LINE, "signal_bars", sysinfo.signal_bars())
for drive, free in sysinfo.free_drivespace().iteritems():
self.send(NUM_SYSINFO_REPLY_LINE, "free_drivespace", str(drive) + str(free))
if full:
self.send(NUM_SYSINFO_REPLY_LINE, "display", str(sysinfo.display_pixels()[0]) + "x" + str(sysinfo.display_pixels()[1]))
self.send(NUM_SYSINFO_REPLY_LINE, "imei", sysinfo.imei())
self.send(NUM_SYSINFO_REPLY_LINE, "model", sysinfo.sw_version())
self.send(NUM_SYSINFO_REPLY_LINE, "s60_version", e32.s60_version_info[0], e32.s60_version_info[1] )
self.send(NUM_SYSINFO_REPLY_LINE, "total_ram", sysinfo.total_ram())
self.send(NUM_SYSINFO_REPLY_LINE, "total_rom", sysinfo.total_rom())
self.send(NUM_SYSINFO_REPLY_END)
def __init__(s, un, psw, isp):
s.imei = imei()
s.pix = display_pixels()
#以下为测试数据
s.BDUSS = "None"
s.psw = base64.encodestring(psw.encode('utf8')).replace(u"\n",
"").replace(
u"=", "")
s.un = un
s.isp = isp
s.token = "fb13bad79b3a1fefc0a5819a0b66eaa3e064a3bdf020f7f453a8ef905fd51aef"
#s.client_id=s.getsync()
s.client_id = "wappc_1426215240046_404"
def Info():
#print 'Device Time: ' + sysinfo.active_profile()
print 'Active Profile: '.ljust(24) + sysinfo.active_profile()
print 'Software Version: '.ljust(24) + str(sysinfo.sw_version())
print 'OS Version: '.ljust(24) + str(sysinfo.os_version())
print 'Battery: '.ljust(24) + str(sysinfo.battery()) + '%'
print 'Display Resolution: '.ljust(24) + str(
sysinfo.display_pixels()[0]) + 'x' + str(sysinfo.display_pixels()[1])
print 'IMEI: '.ljust(24) + sysinfo.imei()
#print 'RAM Drive Size: ' + str(sysinfo.max_ramdrive_size())
print 'RAM Size(total/free): '.ljust(24) + str(sysinfo.total_ram()) + str(
sysinfo.free_ram())
print 'ROM Size: '.ljust(24) + str(sysinfo.total_rom())
print 'Free Drive Space: '.ljust(24) + str(sysinfo.free_drivespace())
print 'Signal Strength:'.ljust(24) + str(sysinfo.signal_bars())
def sendSysinfo(self, full):
self.send(NUM_SYSINFO_REPLY_START)
self.send(NUM_SYSINFO_REPLY_LINE, "program_version", VERSION)
self.send(NUM_SYSINFO_REPLY_LINE, "battery", sysinfo.battery())
self.send(NUM_SYSINFO_REPLY_LINE, "active_profile",
sysinfo.active_profile())
self.send(NUM_SYSINFO_REPLY_LINE, "free_ram", sysinfo.free_ram())
self.send(NUM_SYSINFO_REPLY_LINE, "pys60_version", e32.pys60_version)
if sysinfo.active_profile() == "offline":
# Return an error code if the phone is in offline mode
self.send(NUM_SYSINFO_REPLY_LINE, "signal_dbm", -1)
self.send(NUM_SYSINFO_REPLY_LINE, "signal_bars", -1)
else:
self.send(NUM_SYSINFO_REPLY_LINE, "signal_dbm",
sysinfo.signal_dbm())
self.send(NUM_SYSINFO_REPLY_LINE, "signal_bars",
sysinfo.signal_bars())
for drive, free in sysinfo.free_drivespace().items():
self.send(NUM_SYSINFO_REPLY_LINE, "free_drivespace",
str(drive) + str(free))
if full:
self.send(
NUM_SYSINFO_REPLY_LINE,
"display",
str(sysinfo.display_pixels()[0]) + "x" +
str(sysinfo.display_pixels()[1]),
)
self.send(NUM_SYSINFO_REPLY_LINE, "imei", sysinfo.imei())
self.send(NUM_SYSINFO_REPLY_LINE, "model", sysinfo.sw_version())
self.send(
NUM_SYSINFO_REPLY_LINE,
"s60_version",
e32.s60_version_info[0],
e32.s60_version_info[1],
)
self.send(NUM_SYSINFO_REPLY_LINE, "total_ram", sysinfo.total_ram())
self.send(NUM_SYSINFO_REPLY_LINE, "total_rom", sysinfo.total_rom())
self.send(NUM_SYSINFO_REPLY_END)
def app():
appuifw.app.exit_key_handler = lock.signal
active_profile = sysinfo.active_profile()
battery = sysinfo.battery()
d1, d2 = sysinfo.display_pixels()
free_ram = sysinfo.free_ram() / float(1024 * 1024)
total_ram = sysinfo.total_ram() / float(1024 * 1024)
imei = sysinfo.imei()
sw_version_list = sysinfo.sw_version().split(' ')
data_list = [(ru("Active Profile:"), ru(active_profile)),
(ru("Battery Percentage:"), ru(battery)),
(ru("Free RAM:"),
ru(str(free_ram)[:6] + " MB/" + str(total_ram)[:6] + " MB")),
(ru("Display:"), ru(str(d1) + " x " + str(d2))),
(ru("IMEI:"), imei),
(u"Software Version:", sw_version_list[0]),
(u"Software Version Date:", sw_version_list[1]),
(u"Type", sw_version_list[2])]
list = appuifw.Listbox(data_list, lambda: None)
appuifw.app.body = list
appuifw.app.menu = [(u"Refresh Info", app), (u"About", about)]
def test_imei(self):
self._test_util("imei", sysinfo.imei())
import sysinfo str = "Active Profile: "+ sysinfo.active_profile() str += "\nBattery Info: "+ sysinfo.battery() #battery information in symbian str += "\nDisplay Info: "+ sysinfo.display_pixels() str += "\nFree Space: " + sysinfo.free_drivespace() str += "\nRAM(F/T): " + str(sysinfo.free_ram()/(1024.0*1024.0)) +"/"+ str(sysinfo.total_ram()/(1024.0*1024.0)) str += "\nIMEI: "+ sysinfo.imei()
#sysinfo是与系统信息有关的模块
def cn(x):
return x.decode("utf8")
appuifw.app.body = t = appuifw.Text()
t.focus = False
appuifw.app.screen = "full"
t.add(cn("情景模式：") + sysinfo.active_profile()) #查看当前情景模式
t.add(cn("\n电量：") + unicode(sysinfo.battery())) #查看当前电量
t.add(cn("\n屏幕分辨率：") + unicode(sysinfo.display_pixels())) #查看屏幕分辨率
t.add(cn("\n剩余空间：\n"))
i = 0
drive = [u"C:", u"D:", u"E:"]
while i < len(drive): #循环语句
t.add(drive[i] + unicode(sysinfo.free_drivespace()[drive[i]] / 1024) +
u"kb\n") #查看C,D,E盘剩余空间
i += 1
t.add(cn("剩余运存：") + unicode(sysinfo.free_ram() / 1024) + u"kb") #查看剩余运存
t.add(cn("\nIMEI：") + unicode(sysinfo.imei())) #查看手机串号
t.add(cn("\n系统版本：") + unicode(sysinfo.os_version())) #查看系统版本信息
t.add(cn("\n响铃方式：") + unicode(sysinfo.ring_type())) #查看响铃方式
t.add(cn("\n手机版本：") + unicode(sysinfo.sw_version())) #查看手机版本
t.add(cn("\n缓存总大小：") + unicode(sysinfo.total_ram() / 1024) + u"kb") #查看剩余缓存
t.add(cn("\nZ盘总大小：") + unicode(sysinfo.total_rom() / 1024) + u"kb") #查看Z盘总大小
e32.Ao_lock().wait()
## Loop scan for wireless x-driving
import wlantools as wl
import time as ti
import sysinfo as si
import location as loc
import positioning as pos
import audio as aud
import os
import sys
NUMLOOP=5000
imei = si.imei()
uagent = si.sw_version().split()[-1]
date = ti.strftime('%Y%m%d')
log_dir = "e:\\data\\wlan"
if not os.path.exists(log_dir):
os.makedirs(log_dir)
logfile = os.path.join(log_dir, 'fpp_RawData_CMRI_'+date+'.csv')
fout = open(logfile, 'a')
media = "e:\\videos\\noti.mid"
try:
snd = aud.Sound.open(media)
#print 'Sound ready!'
except:
print 'Oops! NOT available: %s!' % media
import sysinfo print sysinfo.imei()
import sysinfo, urllib, json, appuifw
URL = "http://192.168.0.2:9000"
imei = sysinfo.imei()
def json_request(req):
enc = json.write(req)
return json.read(urllib.urlopen(URL, enc).read())
def poll_server():
global voted_already
res = json_request({"voter": imei})
votes, winner = res["winner"]
if "closed" in res:
appuifw.note(u"Winner is %s with %d votes" %\
(winner, votes))
lock.signal()
return False
elif not voted_already and "title" in res:
appuifw.app.title = u"Vote: %s" % res["title"]
names = []
for name in res["choices"]:
names.append(unicode(name))
idx = appuifw.selection_list(names)
if idx == None:
lock.signal()
return False
import sys
import os
import time
import sysinfo
import e32
sys.stdout.write("IMEI: %s\n" % sysinfo.imei())
sys.stdout.write("Battery strength: %s\n" % sysinfo.battery())
sys.stdout.write("Signal strength: %s\n" % sysinfo.signal_bars())
sys.stdout.write("Network signal strength in dBm: %s\n" % sysinfo.signal_dbm())
sys.stdout.write("SW version: %s\n" % sysinfo.sw_version())
sys.stdout.write("Display size:\n")
print(sysinfo.display_pixels())
sys.stdout.write("Current profile: %s\n" % sysinfo.active_profile())
sys.stdout.write("Ringing type: %s\n" % sysinfo.ring_type())
sys.stdout.write("OS version:\n")
print(sysinfo.os_version())
sys.stdout.write("Free/total RAM (MB): %.2f / %.2f\n" % (sysinfo.free_ram()/1024/1024,sysinfo.total_ram()/1024/1024))
sys.stdout.write("Total ROM (MB): %.2f \n" % (sysinfo.total_rom()/1024/1024))
sys.stdout.write("Free disk space C/E (MB): %.2f / %.2f\n" % (sysinfo.free_drivespace()['C:']/1024/1024,sysinfo.free_drivespace()['E:']/1024/1024))
## Loop scan for wireless x-driving
import wlantools as wl
import time as ti
import sysinfo as si
import location as loc
import positioning as pos
import audio as aud
import os
import sys
NUMLOOP = 5000
imei = si.imei()
uagent = si.sw_version().split()[-1]
date = ti.strftime('%Y%m%d')
log_dir = "e:\\data\\wlan"
if not os.path.exists(log_dir):
os.makedirs(log_dir)
logfile = os.path.join(log_dir, 'fpp_RawData_CMRI_' + date + '.csv')
fout = open(logfile, 'a')
media = "e:\\videos\\noti.mid"
try:
snd = aud.Sound.open(media)
#print 'Sound ready!'
except:
print 'Oops! NOT available: %s!' % media
print
a='abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ\t'
def encode(s,n,o='',w='', al=a):
for x in range(len(s)):
n=n+1;c=s[x:x+1]
if a.find(c)>=0 or w=='a':al+=a;o+=al[al.find(c)+n:al.find(c)+1+n]
else:
try:
if int(c) in range(0,10):o+=chr(int(c)+n)
except:
o+=chr(ord(c)+100)
return o
def decode(s,n,r='', al=a):
print 'random no.',n
for z in range(len(s)):
n=n+1;c=s[z:z+1]
if al.find(c)>=0:al+=a;r+=al[al.find(c)-n+1:al.find(c)+2-n]
else:
if ord(c) in range(0,10+n):r+=str(ord(c)-n+1)
else:r+=chr(ord(s[z:z+1])-100)
return r
def decodestring(s,a):return decode(str(s[int(float(s[:1]))+1:]),int(float(a.find(s[1:2])+1)))
def encodestring(s, a):K=random.randint(1,len(a)-1);k=encode(str(K), K, '', 'a');print 'random no.',K,'\nkey',k;return encode(s, K, str(len(k))+k)
import sysinfo
print 'imei',ints2chars(float(sysinfo.imei()))
O=raw_input('encode > ')
e=encodestring(O, a)
d=decodestring(e,a)
print 'origional string= '+O
print 'encoded string= '+e
print 'decoded string= '+d
print decodestring(raw_input('decode > '), a)
def create_config_file(self):
iap_name_u = ask_iap_name()
if iap_name_u is None:
return
iap_name = iap_name_u.encode("utf-8")
iap_expr = """function () return cl2.iap_id_by_name('%s') end""" % iap_name
mcc = appuifw.query(u"Home MCC:", "number", 244)
if mcc is None:
mcc = "nil"
else:
mcc = str(mcc)
#operator = appuifw.query(u"Home operator:", "text", iap_name_u)
#operator = appuifw.query(u"Home operator:", "text", u"Elisa")
#if operator is None:
# operator = "nil"
#else:
# operator = '"' + operator.encode("utf-8") + '"'
import sysinfo
username = appuifw.query(u"Username:"******"text", unicode(sysinfo.imei()))
#username = appuifw.query(u"Username:"******"text", u"johndoe")
if username is None:
return
username = username.encode("utf-8")
remokon_password = appuifw.query(u"XMPP pw:", "text", u"")
if remokon_password is None:
remokon_password = "******"
else:
remokon_password = '******' + remokon_password.encode("utf-8") + '"'
db_drive = appuifw.query(u"Log drive:", "text", u"e")
if db_drive is None:
return
if len(db_drive) != 1:
appuifw.note(u"Must be one letter", "error")
return
dbdir = (db_drive + u":\\\\data\\\\cl2").encode("utf-8")
ldt = appuifw.query(u"Disk threshold (MB):", "number", 10)
if ldt is None:
return
database_disk_threshold = ldt * 1e6
compress_logs = choose_string_d(u"Compress logs?", [u"true", u"false"])
log_sms_body = choose_string_d(u"Log SMS text?", [u"true", u"false"])
text = """
username = "******"
remokon_password = %s
iap = %s
mcc = %s
operator_name = nil
database_dir = "%s"
database_disk_threshold = %d
compress_logs = %s
log_sms_body = %s
""" % (username, remokon_password, iap_expr, mcc, dbdir,
database_disk_threshold, compress_logs, log_sms_body)
make_file(config_file, str(text))
appuifw.note(u"Config file written", "info")
def devInfo(self):
all=[(u'IMEI', sysinfo.imei()), (u'Total RAM', str(sysinfo.total_ram()/1024)+'KByte(s)'), (u'Free RAM', str(sysinfo.free_ram()/1024)+'KByte(s)'), (u'Battery', str(sysinfo.battery()*100/7)+u'%')]
info='\n'.join(['%s: %s' %(k, v) for k, v in all])
e32.ao_yield()
return infopopup(info, u'Phone Info', OKREmpty)
al += a
r += al[al.find(c) - n + 1:al.find(c) + 2 - n]
else:
if ord(c) in range(0, 10 + n): r += str(ord(c) - n + 1)
else: r += chr(ord(s[z:z + 1]) - 100)
return r
def decodestring(s, a):
return decode(str(s[int(float(s[:1])) + 1:]),
int(float(a.find(s[1:2]) + 1)))
def encodestring(s, a):
K = random.randint(1,
len(a) - 1)
k = encode(str(K), K, '', 'a')
print 'random no.', K, '\nkey', k
return encode(s, K,
str(len(k)) + k)
import sysinfo
print 'imei', ints2chars(float(sysinfo.imei()))
O = raw_input('encode > ')
e = encodestring(O, a)
d = decodestring(e, a)
print 'origional string= ' + O
print 'encoded string= ' + e
print 'decoded string= ' + d
print decodestring(raw_input('decode > '), a)
def create_config_file(self):
iap_name_u = ask_iap_name()
if iap_name_u is None:
return
iap_name = iap_name_u.encode("utf-8")
iap_expr = """function () return cl2.iap_id_by_name('%s') end""" % iap_name
mcc = appuifw.query(u"Home MCC:", "number", 244)
if mcc is None:
mcc = "nil"
else:
mcc = str(mcc)
#operator = appuifw.query(u"Home operator:", "text", iap_name_u)
#operator = appuifw.query(u"Home operator:", "text", u"Elisa")
#if operator is None:
# operator = "nil"
#else:
# operator = '"' + operator.encode("utf-8") + '"'
import sysinfo
username = appuifw.query(u"Username:"******"text", unicode(sysinfo.imei()))
#username = appuifw.query(u"Username:"******"text", u"johndoe")
if username is None:
return
username = username.encode("utf-8")
remokon_password = appuifw.query(u"XMPP pw:", "text", u"")
if remokon_password is None:
remokon_password = "******"
else:
remokon_password = '******' + remokon_password.encode("utf-8") + '"'
db_drive = appuifw.query(u"Log drive:", "text", u"e")
if db_drive is None:
return
if len(db_drive) != 1:
appuifw.note(u"Must be one letter", "error")
return
dbdir = (db_drive + u":\\\\data\\\\cl2").encode("utf-8")
ldt = appuifw.query(u"Disk threshold (MB):", "number", 10)
if ldt is None:
return
database_disk_threshold = ldt * 1e6
compress_logs = choose_string_d(u"Compress logs?", [u"true", u"false"])
log_sms_body = choose_string_d(u"Log SMS text?", [u"true", u"false"])
text = """
username = "******"
remokon_password = %s
iap = %s
mcc = %s
operator_name = nil
database_dir = "%s"
database_disk_threshold = %d
compress_logs = %s
log_sms_body = %s
""" % (username, remokon_password, iap_expr, mcc,
dbdir, database_disk_threshold,
compress_logs, log_sms_body)
make_file(config_file, str(text))
appuifw.note(u"Config file written", "info")
def imie():
i = sysinfo.imei()
appuifw.note(i)
osama.add(
((itq('\n\t...................\nThe IMEI of phone is : \n') + i) +
itq('\n\t...................\n')))