Exemple #1
0
def cephfs_setup(ctx, config):
    testdir = teuthology.get_testdir(ctx)
    coverage_dir = '{tdir}/archive/coverage'.format(tdir=testdir)

    first_mon = teuthology.get_first_mon(ctx, config)
    (mon_remote,) = ctx.cluster.only(first_mon).remotes.iterkeys()
    mdss = ctx.cluster.only(teuthology.is_type('mds'))
    # If there are any MDSs, then create a filesystem for them to use
    # Do this last because requires mon cluster to be up and running
    if mdss.remotes:
        log.info('Setting up CephFS filesystem...')

        ceph_fs = Filesystem(ctx)
        if not ceph_fs.legacy_configured():
            ceph_fs.create()

        is_active_mds = lambda role: role.startswith('mds.') and not role.endswith('-s') and role.find('-s-') == -1
        all_roles = [item for remote_roles in mdss.remotes.values() for item in remote_roles]
        num_active = len([r for r in all_roles if is_active_mds(r)])
        mon_remote.run(args=[
            'adjust-ulimits',
            'ceph-coverage',
            coverage_dir,
            'ceph',
            'mds', 'set_max_mds', str(num_active)])

    yield
Exemple #2
0
def cephfs_setup(ctx, config):
    testdir = teuthology.get_testdir(ctx)
    coverage_dir = '{tdir}/archive/coverage'.format(tdir=testdir)

    first_mon = teuthology.get_first_mon(ctx, config)
    (mon_remote, ) = ctx.cluster.only(first_mon).remotes.iterkeys()
    mdss = ctx.cluster.only(teuthology.is_type('mds'))
    # If there are any MDSs, then create a filesystem for them to use
    # Do this last because requires mon cluster to be up and running
    if mdss.remotes:
        log.info('Setting up CephFS filesystem...')

        ceph_fs = Filesystem(ctx)
        if not ceph_fs.legacy_configured():
            ceph_fs.create()

        is_active_mds = lambda role: role.startswith(
            'mds.') and not role.endswith('-s') and role.find('-s-') == -1
        all_roles = [
            item for remote_roles in mdss.remotes.values()
            for item in remote_roles
        ]
        num_active = len([r for r in all_roles if is_active_mds(r)])
        mon_remote.run(args=[
            'sudo', 'adjust-ulimits', 'ceph-coverage', coverage_dir, 'ceph',
            'mds', 'set_max_mds',
            str(num_active)
        ])

    yield
Exemple #3
0
def cephfs_setup(ctx, config):
    cluster_name = config['cluster']
    testdir = teuthology.get_testdir(ctx)
    coverage_dir = '{tdir}/archive/coverage'.format(tdir=testdir)

    first_mon = teuthology.get_first_mon(ctx, config, cluster_name)
    (mon_remote,) = ctx.cluster.only(first_mon).remotes.iterkeys()
    mdss = ctx.cluster.only(teuthology.is_type('mds', cluster_name))
    # If there are any MDSs, then create a filesystem for them to use
    # Do this last because requires mon cluster to be up and running
    if mdss.remotes:
        log.info('Setting up CephFS filesystem...')

        ceph_fs = Filesystem(ctx) # TODO: make Filesystem cluster-aware
        if not ceph_fs.legacy_configured():
            ceph_fs.create()

        is_active_mds = lambda role: 'mds.' in role and not role.endswith('-s') and '-s-' not in role
        all_roles = [item for remote_roles in mdss.remotes.values() for item in remote_roles]
        num_active = len([r for r in all_roles if is_active_mds(r)])
        mon_remote.run(
            args=[
                'sudo',
                'adjust-ulimits',
                'ceph-coverage',
                coverage_dir,
                'ceph', 'mds', 'set', 'allow_multimds', 'true',
                '--yes-i-really-mean-it'],
	    check_status=False,  # probably old version, upgrade test
        )
        mon_remote.run(args=[
            'sudo',
            'adjust-ulimits',
            'ceph-coverage',
            coverage_dir,
            'ceph',
            '--cluster', cluster_name,
            'mds', 'set_max_mds', str(num_active)])

    yield
Exemple #4
0
def cephfs_setup(ctx, config):
    cluster_name = config['cluster']
    testdir = teuthology.get_testdir(ctx)
    coverage_dir = '{tdir}/archive/coverage'.format(tdir=testdir)

    first_mon = teuthology.get_first_mon(ctx, config, cluster_name)
    (mon_remote,) = ctx.cluster.only(first_mon).remotes.iterkeys()
    mdss = ctx.cluster.only(teuthology.is_type('mds', cluster_name))
    # If there are any MDSs, then create a filesystem for them to use
    # Do this last because requires mon cluster to be up and running
    if mdss.remotes:
        log.info('Setting up CephFS filesystem...')

        ceph_fs = Filesystem(ctx) # TODO: make Filesystem cluster-aware
        if not ceph_fs.legacy_configured():
            ceph_fs.create()

        is_active_mds = lambda role: 'mds.' in role and not role.endswith('-s') and '-s-' not in role
        all_roles = [item for remote_roles in mdss.remotes.values() for item in remote_roles]
        num_active = len([r for r in all_roles if is_active_mds(r)])
        mon_remote.run(
            args=[
                'sudo',
                'adjust-ulimits',
                'ceph-coverage',
                coverage_dir,
                'ceph', 'mds', 'set', 'allow_multimds', 'true',
                '--yes-i-really-mean-it'],
	    check_status=False,  # probably old version, upgrade test
        )
        mon_remote.run(args=[
            'sudo',
            'adjust-ulimits',
            'ceph-coverage',
            coverage_dir,
            'ceph',
            '--cluster', cluster_name,
            'mds', 'set_max_mds', str(num_active)])

    yield
Exemple #5
0
def build_ceph_cluster(ctx, config):
    """Build a ceph cluster"""

    # Expect to find ceph_admin on the first mon by ID, same place that the download task
    # puts it.  Remember this here, because subsequently IDs will change from those in
    # the test config to those that ceph-deploy invents.
    (ceph_admin,) = ctx.cluster.only(
        teuthology.get_first_mon(ctx, config)).remotes.iterkeys()

    def execute_ceph_deploy(cmd):
        """Remotely execute a ceph_deploy command"""
        return ceph_admin.run(
            args=[
                'cd',
                '{tdir}/ceph-deploy'.format(tdir=testdir),
                run.Raw('&&'),
                run.Raw(cmd),
            ],
            check_status=False,
        ).exitstatus

    try:
        log.info('Building ceph cluster using ceph-deploy...')
        testdir = teuthology.get_testdir(ctx)
        ceph_branch = None
        if config.get('branch') is not None:
            cbranch = config.get('branch')
            for var, val in cbranch.iteritems():
                ceph_branch = '--{var}={val}'.format(var=var, val=val)
        all_nodes = get_all_nodes(ctx, config)
        mds_nodes = get_nodes_using_role(ctx, 'mds')
        mds_nodes = " ".join(mds_nodes)
        mon_node = get_nodes_using_role(ctx, 'mon')
        mon_nodes = " ".join(mon_node)
        new_mon = './ceph-deploy new' + " " + mon_nodes
        mon_hostname = mon_nodes.split(' ')[0]
        mon_hostname = str(mon_hostname)
        gather_keys = './ceph-deploy gatherkeys' + " " + mon_hostname
        deploy_mds = './ceph-deploy mds create' + " " + mds_nodes
        no_of_osds = 0

        if mon_nodes is None:
            raise RuntimeError("no monitor nodes in the config file")

        estatus_new = execute_ceph_deploy(new_mon)
        if estatus_new != 0:
            raise RuntimeError("ceph-deploy: new command failed")

        log.info('adding config inputs...')
        testdir = teuthology.get_testdir(ctx)
        conf_path = '{tdir}/ceph-deploy/ceph.conf'.format(tdir=testdir)

        if config.get('conf') is not None:
            confp = config.get('conf')
            for section, keys in confp.iteritems():
                lines = '[{section}]\n'.format(section=section)
                teuthology.append_lines_to_file(ceph_admin, conf_path, lines,
                                                sudo=True)
                for key, value in keys.iteritems():
                    log.info("[%s] %s = %s" % (section, key, value))
                    lines = '{key} = {value}\n'.format(key=key, value=value)
                    teuthology.append_lines_to_file(
                        ceph_admin, conf_path, lines, sudo=True)

        # install ceph
        dev_branch = ctx.config['branch']
        branch = '--dev={branch}'.format(branch=dev_branch)
        if ceph_branch:
            option = ceph_branch
        else:
            option = branch
        install_nodes = './ceph-deploy install ' + option + " " + all_nodes
        estatus_install = execute_ceph_deploy(install_nodes)
        if estatus_install != 0:
            raise RuntimeError("ceph-deploy: Failed to install ceph")
        # install ceph-test package too
        install_nodes2 = './ceph-deploy install --tests ' + option + \
                         " " + all_nodes
        estatus_install = execute_ceph_deploy(install_nodes2)
        if estatus_install != 0:
            raise RuntimeError("ceph-deploy: Failed to install ceph-test")

        mon_create_nodes = './ceph-deploy mon create-initial'
        # If the following fails, it is OK, it might just be that the monitors
        # are taking way more than a minute/monitor to form quorum, so lets
        # try the next block which will wait up to 15 minutes to gatherkeys.
        execute_ceph_deploy(mon_create_nodes)

        # create-keys is explicit now
        # http://tracker.ceph.com/issues/16036
        mons = ctx.cluster.only(teuthology.is_type('mon'))
        for remote in mons.remotes.iterkeys():
            remote.run(args=['sudo', 'ceph-create-keys', '--cluster', 'ceph',
                             '--id', remote.shortname])

        estatus_gather = execute_ceph_deploy(gather_keys)
        if mds_nodes:
            estatus_mds = execute_ceph_deploy(deploy_mds)
            if estatus_mds != 0:
                raise RuntimeError("ceph-deploy: Failed to deploy mds")

        if config.get('test_mon_destroy') is not None:
            for d in range(1, len(mon_node)):
                mon_destroy_nodes = './ceph-deploy mon destroy' + \
                    " " + mon_node[d]
                estatus_mon_d = execute_ceph_deploy(mon_destroy_nodes)
                if estatus_mon_d != 0:
                    raise RuntimeError("ceph-deploy: Failed to delete monitor")

        node_dev_list = get_dev_for_osd(ctx, config)
        for d in node_dev_list:
            node = d[0]
            for disk in d[1:]:
                zap = './ceph-deploy disk zap ' + node + ':' + disk
                estatus = execute_ceph_deploy(zap)
                if estatus != 0:
                    raise RuntimeError("ceph-deploy: Failed to zap osds")
            osd_create_cmd = './ceph-deploy osd create '
            if config.get('dmcrypt') is not None:
                osd_create_cmd += '--dmcrypt '
            osd_create_cmd += ":".join(d)
            estatus_osd = execute_ceph_deploy(osd_create_cmd)
            if estatus_osd == 0:
                log.info('successfully created osd')
                no_of_osds += 1
            else:
                raise RuntimeError("ceph-deploy: Failed to create osds")

        if config.get('wait-for-healthy', True) and no_of_osds >= 2:
            is_healthy(ctx=ctx, config=None)

            log.info('Setting up client nodes...')
            conf_path = '/etc/ceph/ceph.conf'
            admin_keyring_path = '/etc/ceph/ceph.client.admin.keyring'
            first_mon = teuthology.get_first_mon(ctx, config)
            (mon0_remote,) = ctx.cluster.only(first_mon).remotes.keys()
            conf_data = teuthology.get_file(
                remote=mon0_remote,
                path=conf_path,
                sudo=True,
            )
            admin_keyring = teuthology.get_file(
                remote=mon0_remote,
                path=admin_keyring_path,
                sudo=True,
            )

            clients = ctx.cluster.only(teuthology.is_type('client'))
            for remot, roles_for_host in clients.remotes.iteritems():
                for id_ in teuthology.roles_of_type(roles_for_host, 'client'):
                    client_keyring = \
                        '/etc/ceph/ceph.client.{id}.keyring'.format(id=id_)
                    mon0_remote.run(
                        args=[
                            'cd',
                            '{tdir}'.format(tdir=testdir),
                            run.Raw('&&'),
                            'sudo', 'bash', '-c',
                            run.Raw('"'), 'ceph',
                            'auth',
                            'get-or-create',
                            'client.{id}'.format(id=id_),
                            'mds', 'allow',
                            'mon', 'allow *',
                            'osd', 'allow *',
                            run.Raw('>'),
                            client_keyring,
                            run.Raw('"'),
                        ],
                    )
                    key_data = teuthology.get_file(
                        remote=mon0_remote,
                        path=client_keyring,
                        sudo=True,
                    )
                    teuthology.sudo_write_file(
                        remote=remot,
                        path=client_keyring,
                        data=key_data,
                        perms='0644'
                    )
                    teuthology.sudo_write_file(
                        remote=remot,
                        path=admin_keyring_path,
                        data=admin_keyring,
                        perms='0644'
                    )
                    teuthology.sudo_write_file(
                        remote=remot,
                        path=conf_path,
                        data=conf_data,
                        perms='0644'
                    )

            if mds_nodes:
                log.info('Configuring CephFS...')
                ceph_fs = Filesystem(ctx)
                if not ceph_fs.legacy_configured():
                    ceph_fs.create()
        elif not config.get('only_mon'):
            raise RuntimeError(
                "The cluster is NOT operational due to insufficient OSDs")
        yield

    except Exception:
        log.info(
            "Error encountered, logging exception before tearing down ceph-deploy")
        log.info(traceback.format_exc())
        raise
    finally:
        if config.get('keep_running'):
            return
        log.info('Stopping ceph...')
        ctx.cluster.run(args=['sudo', 'stop', 'ceph-all', run.Raw('||'),
                              'sudo', 'service', 'ceph', 'stop', run.Raw('||'),
                              'sudo', 'systemctl', 'stop', 'ceph.target'])

        # Are you really not running anymore?
        # try first with the init tooling
        # ignoring the status so this becomes informational only
        ctx.cluster.run(
            args=[
                'sudo', 'status', 'ceph-all', run.Raw('||'),
                'sudo', 'service', 'ceph', 'status', run.Raw('||'),
                'sudo', 'systemctl', 'status', 'ceph.target'],
            check_status=False)

        # and now just check for the processes themselves, as if upstart/sysvinit
        # is lying to us. Ignore errors if the grep fails
        ctx.cluster.run(args=['sudo', 'ps', 'aux', run.Raw('|'),
                              'grep', '-v', 'grep', run.Raw('|'),
                              'grep', 'ceph'], check_status=False)

        if ctx.archive is not None:
            # archive mon data, too
            log.info('Archiving mon data...')
            path = os.path.join(ctx.archive, 'data')
            os.makedirs(path)
            mons = ctx.cluster.only(teuthology.is_type('mon'))
            for remote, roles in mons.remotes.iteritems():
                for role in roles:
                    if role.startswith('mon.'):
                        teuthology.pull_directory_tarball(
                            remote,
                            '/var/lib/ceph/mon',
                            path + '/' + role + '.tgz')

            log.info('Compressing logs...')
            run.wait(
                ctx.cluster.run(
                    args=[
                        'sudo',
                        'find',
                        '/var/log/ceph',
                        '-name',
                        '*.log',
                        '-print0',
                        run.Raw('|'),
                        'sudo',
                        'xargs',
                        '-0',
                        '--no-run-if-empty',
                        '--',
                        'gzip',
                        '--',
                    ],
                    wait=False,
                ),
            )

            log.info('Archiving logs...')
            path = os.path.join(ctx.archive, 'remote')
            os.makedirs(path)
            for remote in ctx.cluster.remotes.iterkeys():
                sub = os.path.join(path, remote.shortname)
                os.makedirs(sub)
                teuthology.pull_directory(remote, '/var/log/ceph',
                                          os.path.join(sub, 'log'))

        # Prevent these from being undefined if the try block fails
        all_nodes = get_all_nodes(ctx, config)
        purge_nodes = './ceph-deploy purge' + " " + all_nodes
        purgedata_nodes = './ceph-deploy purgedata' + " " + all_nodes

        log.info('Purging package...')
        execute_ceph_deploy(purge_nodes)
        log.info('Purging data...')
        execute_ceph_deploy(purgedata_nodes)
Exemple #6
0
def build_ceph_cluster(ctx, config):
    """Build a ceph cluster"""

    # Expect to find ceph_admin on the first mon by ID, same place that the download task
    # puts it.  Remember this here, because subsequently IDs will change from those in
    # the test config to those that ceph-deploy invents.
    (ceph_admin,) = ctx.cluster.only(teuthology.get_first_mon(ctx, config)).remotes.iterkeys()

    def execute_ceph_deploy(cmd):
        """Remotely execute a ceph_deploy command"""
        return ceph_admin.run(
            args=[
                'cd',
                '{tdir}/ceph-deploy'.format(tdir=testdir),
                run.Raw('&&'),
                run.Raw(cmd),
            ],
            check_status=False,
        ).exitstatus

    try:
        log.info('Building ceph cluster using ceph-deploy...')
        testdir = teuthology.get_testdir(ctx)
        ceph_branch = None
        if config.get('branch') is not None:
            cbranch = config.get('branch')
            for var, val in cbranch.iteritems():
                ceph_branch = '--{var}={val}'.format(var=var, val=val)
        all_nodes = get_all_nodes(ctx, config)
        mds_nodes = get_nodes_using_role(ctx, 'mds')
        mds_nodes = " ".join(mds_nodes)
        mon_node = get_nodes_using_role(ctx, 'mon')
        mon_nodes = " ".join(mon_node)
        new_mon = './ceph-deploy new'+" "+mon_nodes
        install_nodes = './ceph-deploy install ' + (ceph_branch if ceph_branch else "--dev=master") + " " + all_nodes
        mon_hostname = mon_nodes.split(' ')[0]
        mon_hostname = str(mon_hostname)
        gather_keys = './ceph-deploy gatherkeys'+" "+mon_hostname
        deploy_mds = './ceph-deploy mds create'+" "+mds_nodes
        no_of_osds = 0

        if mon_nodes is None:
            raise RuntimeError("no monitor nodes in the config file")

        estatus_new = execute_ceph_deploy(new_mon)
        if estatus_new != 0:
            raise RuntimeError("ceph-deploy: new command failed")

        log.info('adding config inputs...')
        testdir = teuthology.get_testdir(ctx)
        conf_path = '{tdir}/ceph-deploy/ceph.conf'.format(tdir=testdir)

        if config.get('conf') is not None:
            confp = config.get('conf')
            for section, keys in confp.iteritems():
                lines = '[{section}]\n'.format(section=section)
                teuthology.append_lines_to_file(ceph_admin, conf_path, lines,
                                                sudo=True)
                for key, value in keys.iteritems():
                    log.info("[%s] %s = %s" % (section, key, value))
                    lines = '{key} = {value}\n'.format(key=key, value=value)
                    teuthology.append_lines_to_file(ceph_admin, conf_path, lines,
                                                    sudo=True)

        estatus_install = execute_ceph_deploy(install_nodes)
        if estatus_install != 0:
            raise RuntimeError("ceph-deploy: Failed to install ceph")

        mon_create_nodes = './ceph-deploy mon create-initial'
        # If the following fails, it is OK, it might just be that the monitors
        # are taking way more than a minute/monitor to form quorum, so lets
        # try the next block which will wait up to 15 minutes to gatherkeys.
        execute_ceph_deploy(mon_create_nodes)

        estatus_gather = execute_ceph_deploy(gather_keys)
        max_gather_tries = 90
        gather_tries = 0
        while (estatus_gather != 0):
            gather_tries += 1
            if gather_tries >= max_gather_tries:
                msg = 'ceph-deploy was not able to gatherkeys after 15 minutes'
                raise RuntimeError(msg)
            estatus_gather = execute_ceph_deploy(gather_keys)
            time.sleep(10)

        if mds_nodes:
            estatus_mds = execute_ceph_deploy(deploy_mds)
            if estatus_mds != 0:
                raise RuntimeError("ceph-deploy: Failed to deploy mds")

        if config.get('test_mon_destroy') is not None:
            for d in range(1, len(mon_node)):
                mon_destroy_nodes = './ceph-deploy mon destroy'+" "+mon_node[d]
                estatus_mon_d = execute_ceph_deploy(mon_destroy_nodes)
                if estatus_mon_d != 0:
                    raise RuntimeError("ceph-deploy: Failed to delete monitor")

        node_dev_list = get_dev_for_osd(ctx, config)
        osd_create_cmd = './ceph-deploy osd create --zap-disk '
        for d in node_dev_list:
            if config.get('dmcrypt') is not None:
                osd_create_cmd_d = osd_create_cmd+'--dmcrypt'+" "+d
            else:
                osd_create_cmd_d = osd_create_cmd+d
            estatus_osd = execute_ceph_deploy(osd_create_cmd_d)
            if estatus_osd == 0:
                log.info('successfully created osd')
                no_of_osds += 1
            else:
                disks = d.split(':')
                dev_disk = disks[0]+":"+disks[1]
                j_disk = disks[0]+":"+disks[2]
                zap_disk = './ceph-deploy disk zap '+dev_disk+" "+j_disk
                execute_ceph_deploy(zap_disk)
                estatus_osd = execute_ceph_deploy(osd_create_cmd_d)
                if estatus_osd == 0:
                    log.info('successfully created osd')
                    no_of_osds += 1
                else:
                    raise RuntimeError("ceph-deploy: Failed to create osds")

        if config.get('wait-for-healthy', True) and no_of_osds >= 2:
            is_healthy(ctx=ctx, config=None)

            log.info('Setting up client nodes...')
            conf_path = '/etc/ceph/ceph.conf'
            admin_keyring_path = '/etc/ceph/ceph.client.admin.keyring'
            first_mon = teuthology.get_first_mon(ctx, config)
            (mon0_remote,) = ctx.cluster.only(first_mon).remotes.keys()
            conf_data = teuthology.get_file(
                remote=mon0_remote,
                path=conf_path,
                sudo=True,
                )
            admin_keyring = teuthology.get_file(
                remote=mon0_remote,
                path=admin_keyring_path,
                sudo=True,
                )

            clients = ctx.cluster.only(teuthology.is_type('client'))
            for remot, roles_for_host in clients.remotes.iteritems():
                for id_ in teuthology.roles_of_type(roles_for_host, 'client'):
                    client_keyring = \
                        '/etc/ceph/ceph.client.{id}.keyring'.format(id=id_)
                    mon0_remote.run(
                        args=[
                            'cd',
                            '{tdir}'.format(tdir=testdir),
                            run.Raw('&&'),
                            'sudo', 'bash', '-c',
                            run.Raw('"'), 'ceph',
                            'auth',
                            'get-or-create',
                            'client.{id}'.format(id=id_),
                            'mds', 'allow',
                            'mon', 'allow *',
                            'osd', 'allow *',
                            run.Raw('>'),
                            client_keyring,
                            run.Raw('"'),
                            ],
                        )
                    key_data = teuthology.get_file(
                        remote=mon0_remote,
                        path=client_keyring,
                        sudo=True,
                        )
                    teuthology.sudo_write_file(
                        remote=remot,
                        path=client_keyring,
                        data=key_data,
                        perms='0644'
                    )
                    teuthology.sudo_write_file(
                        remote=remot,
                        path=admin_keyring_path,
                        data=admin_keyring,
                        perms='0644'
                    )
                    teuthology.sudo_write_file(
                        remote=remot,
                        path=conf_path,
                        data=conf_data,
                        perms='0644'
                    )

            log.info('Configuring CephFS...')
            ceph_fs = Filesystem(ctx, admin_remote=clients.remotes.keys()[0])
            if not ceph_fs.legacy_configured():
                ceph_fs.create()
        else:
            raise RuntimeError(
                "The cluster is NOT operational due to insufficient OSDs")
        yield

    except Exception:
        log.info("Error encountered, logging exception before tearing down ceph-deploy")
        log.info(traceback.format_exc())
        raise
    finally:
        log.info('Stopping ceph...')
        ctx.cluster.run(args=['sudo', 'stop', 'ceph-all', run.Raw('||'),
                              'sudo', 'service', 'ceph', 'stop' ])

        # Are you really not running anymore?
        # try first with the init tooling
        # ignoring the status so this becomes informational only
        ctx.cluster.run(args=['sudo', 'status', 'ceph-all', run.Raw('||'),
                              'sudo', 'service',  'ceph', 'status'],
                              check_status=False)

        # and now just check for the processes themselves, as if upstart/sysvinit
        # is lying to us. Ignore errors if the grep fails
        ctx.cluster.run(args=['sudo', 'ps', 'aux', run.Raw('|'),
                              'grep', '-v', 'grep', run.Raw('|'),
                              'grep', 'ceph'], check_status=False)

        if ctx.archive is not None:
            # archive mon data, too
            log.info('Archiving mon data...')
            path = os.path.join(ctx.archive, 'data')
            os.makedirs(path)
            mons = ctx.cluster.only(teuthology.is_type('mon'))
            for remote, roles in mons.remotes.iteritems():
                for role in roles:
                    if role.startswith('mon.'):
                        teuthology.pull_directory_tarball(
                            remote,
                            '/var/lib/ceph/mon',
                            path + '/' + role + '.tgz')

            log.info('Compressing logs...')
            run.wait(
                ctx.cluster.run(
                    args=[
                        'sudo',
                        'find',
                        '/var/log/ceph',
                        '-name',
                        '*.log',
                        '-print0',
                        run.Raw('|'),
                        'sudo',
                        'xargs',
                        '-0',
                        '--no-run-if-empty',
                        '--',
                        'gzip',
                        '--',
                        ],
                    wait=False,
                    ),
                )

            log.info('Archiving logs...')
            path = os.path.join(ctx.archive, 'remote')
            os.makedirs(path)
            for remote in ctx.cluster.remotes.iterkeys():
                sub = os.path.join(path, remote.shortname)
                os.makedirs(sub)
                teuthology.pull_directory(remote, '/var/log/ceph',
                                          os.path.join(sub, 'log'))

        # Prevent these from being undefined if the try block fails
        all_nodes = get_all_nodes(ctx, config)
        purge_nodes = './ceph-deploy purge'+" "+all_nodes
        purgedata_nodes = './ceph-deploy purgedata'+" "+all_nodes

        log.info('Purging package...')
        execute_ceph_deploy(purge_nodes)
        log.info('Purging data...')
        execute_ceph_deploy(purgedata_nodes)
Exemple #7
0
def cephfs_setup(ctx, config):
    cluster_name = config["cluster"]
    testdir = teuthology.get_testdir(ctx)
    coverage_dir = "{tdir}/archive/coverage".format(tdir=testdir)

    first_mon = teuthology.get_first_mon(ctx, config, cluster_name)
    (mon_remote,) = ctx.cluster.only(first_mon).remotes.iterkeys()
    mdss = ctx.cluster.only(teuthology.is_type("mds", cluster_name))
    # If there are any MDSs, then create a filesystem for them to use
    # Do this last because requires mon cluster to be up and running
    if mdss.remotes:
        log.info("Setting up CephFS filesystem...")

        ceph_fs = Filesystem(ctx)  # TODO: make Filesystem cluster-aware
        if not ceph_fs.legacy_configured():
            ceph_fs.create()

        is_active_mds = lambda role: "mds." in role and not role.endswith("-s") and "-s-" not in role
        all_roles = [item for remote_roles in mdss.remotes.values() for item in remote_roles]
        num_active = len([r for r in all_roles if is_active_mds(r)])
        mon_remote.run(
            args=[
                "sudo",
                "adjust-ulimits",
                "ceph-coverage",
                coverage_dir,
                "ceph",
                "mds",
                "set",
                "allow_multimds",
                "true",
                "--yes-i-really-mean-it",
            ],
            check_status=False,  # probably old version, upgrade test
        )
        mon_remote.run(
            args=[
                "sudo",
                "adjust-ulimits",
                "ceph-coverage",
                coverage_dir,
                "ceph",
                "--cluster",
                cluster_name,
                "mds",
                "set_max_mds",
                str(num_active),
            ]
        )
        mon_remote.run(
            args=[
                "sudo",
                "adjust-ulimits",
                "ceph-coverage",
                coverage_dir,
                "ceph",
                "mds",
                "set",
                "allow_dirfrags",
                "true",
                "--yes-i-really-mean-it",
            ],
            check_status=False,  # probably old version, upgrade test
        )

    yield
def build_ceph_cluster(ctx, config):
    """Build a ceph cluster"""

    # Expect to find ceph_admin on the first mon by ID, same place that the download task
    # puts it.  Remember this here, because subsequently IDs will change from those in
    # the test config to those that ceph-deploy invents.
    (ceph_admin,) = ctx.cluster.only(teuthology.get_first_mon(ctx, config)).remotes.iterkeys()

    def execute_ceph_deploy(cmd):
        """Remotely execute a ceph_deploy command"""
        return ceph_admin.run(
            args=["cd", "{tdir}/ceph-deploy".format(tdir=testdir), run.Raw("&&"), run.Raw(cmd)], check_status=False
        ).exitstatus

    try:
        log.info("Building ceph cluster using ceph-deploy...")
        testdir = teuthology.get_testdir(ctx)
        ceph_branch = None
        if config.get("branch") is not None:
            cbranch = config.get("branch")
            for var, val in cbranch.iteritems():
                ceph_branch = "--{var}={val}".format(var=var, val=val)
        all_nodes = get_all_nodes(ctx, config)
        mds_nodes = get_nodes_using_role(ctx, "mds")
        mds_nodes = " ".join(mds_nodes)
        mon_node = get_nodes_using_role(ctx, "mon")
        mon_nodes = " ".join(mon_node)
        new_mon = "./ceph-deploy new" + " " + mon_nodes
        mon_hostname = mon_nodes.split(" ")[0]
        mon_hostname = str(mon_hostname)
        gather_keys = "./ceph-deploy gatherkeys" + " " + mon_hostname
        deploy_mds = "./ceph-deploy mds create" + " " + mds_nodes
        no_of_osds = 0

        if mon_nodes is None:
            raise RuntimeError("no monitor nodes in the config file")

        estatus_new = execute_ceph_deploy(new_mon)
        if estatus_new != 0:
            raise RuntimeError("ceph-deploy: new command failed")

        log.info("adding config inputs...")
        testdir = teuthology.get_testdir(ctx)
        conf_path = "{tdir}/ceph-deploy/ceph.conf".format(tdir=testdir)

        if config.get("conf") is not None:
            confp = config.get("conf")
            for section, keys in confp.iteritems():
                lines = "[{section}]\n".format(section=section)
                teuthology.append_lines_to_file(ceph_admin, conf_path, lines, sudo=True)
                for key, value in keys.iteritems():
                    log.info("[%s] %s = %s" % (section, key, value))
                    lines = "{key} = {value}\n".format(key=key, value=value)
                    teuthology.append_lines_to_file(ceph_admin, conf_path, lines, sudo=True)

        # install ceph
        install_nodes = "./ceph-deploy install " + (ceph_branch if ceph_branch else "--dev=master") + " " + all_nodes
        estatus_install = execute_ceph_deploy(install_nodes)
        if estatus_install != 0:
            raise RuntimeError("ceph-deploy: Failed to install ceph")
        # install ceph-test package too
        install_nodes2 = (
            "./ceph-deploy install --tests " + (ceph_branch if ceph_branch else "--dev=master") + " " + all_nodes
        )
        estatus_install = execute_ceph_deploy(install_nodes2)
        if estatus_install != 0:
            raise RuntimeError("ceph-deploy: Failed to install ceph-test")

        mon_create_nodes = "./ceph-deploy mon create-initial"
        # If the following fails, it is OK, it might just be that the monitors
        # are taking way more than a minute/monitor to form quorum, so lets
        # try the next block which will wait up to 15 minutes to gatherkeys.
        execute_ceph_deploy(mon_create_nodes)

        estatus_gather = execute_ceph_deploy(gather_keys)
        max_gather_tries = 90
        gather_tries = 0
        while estatus_gather != 0:
            gather_tries += 1
            if gather_tries >= max_gather_tries:
                msg = "ceph-deploy was not able to gatherkeys after 15 minutes"
                raise RuntimeError(msg)
            estatus_gather = execute_ceph_deploy(gather_keys)
            time.sleep(10)

        if mds_nodes:
            estatus_mds = execute_ceph_deploy(deploy_mds)
            if estatus_mds != 0:
                raise RuntimeError("ceph-deploy: Failed to deploy mds")

        if config.get("test_mon_destroy") is not None:
            for d in range(1, len(mon_node)):
                mon_destroy_nodes = "./ceph-deploy mon destroy" + " " + mon_node[d]
                estatus_mon_d = execute_ceph_deploy(mon_destroy_nodes)
                if estatus_mon_d != 0:
                    raise RuntimeError("ceph-deploy: Failed to delete monitor")

        node_dev_list = get_dev_for_osd(ctx, config)
        for d in node_dev_list:
            node = d[0]
            for disk in d[1:]:
                zap = "./ceph-deploy disk zap " + node + ":" + disk
                estatus = execute_ceph_deploy(zap)
                if estatus != 0:
                    raise RuntimeError("ceph-deploy: Failed to zap osds")
            osd_create_cmd = "./ceph-deploy osd create "
            if config.get("dmcrypt") is not None:
                osd_create_cmd += "--dmcrypt "
            osd_create_cmd += ":".join(d)
            estatus_osd = execute_ceph_deploy(osd_create_cmd)
            if estatus_osd == 0:
                log.info("successfully created osd")
                no_of_osds += 1
            else:
                raise RuntimeError("ceph-deploy: Failed to create osds")

        if config.get("wait-for-healthy", True) and no_of_osds >= 2:
            is_healthy(ctx=ctx, config=None)

            log.info("Setting up client nodes...")
            conf_path = "/etc/ceph/ceph.conf"
            admin_keyring_path = "/etc/ceph/ceph.client.admin.keyring"
            first_mon = teuthology.get_first_mon(ctx, config)
            (mon0_remote,) = ctx.cluster.only(first_mon).remotes.keys()
            conf_data = teuthology.get_file(remote=mon0_remote, path=conf_path, sudo=True)
            admin_keyring = teuthology.get_file(remote=mon0_remote, path=admin_keyring_path, sudo=True)

            clients = ctx.cluster.only(teuthology.is_type("client"))
            for remot, roles_for_host in clients.remotes.iteritems():
                for id_ in teuthology.roles_of_type(roles_for_host, "client"):
                    client_keyring = "/etc/ceph/ceph.client.{id}.keyring".format(id=id_)
                    mon0_remote.run(
                        args=[
                            "cd",
                            "{tdir}".format(tdir=testdir),
                            run.Raw("&&"),
                            "sudo",
                            "bash",
                            "-c",
                            run.Raw('"'),
                            "ceph",
                            "auth",
                            "get-or-create",
                            "client.{id}".format(id=id_),
                            "mds",
                            "allow",
                            "mon",
                            "allow *",
                            "osd",
                            "allow *",
                            run.Raw(">"),
                            client_keyring,
                            run.Raw('"'),
                        ]
                    )
                    key_data = teuthology.get_file(remote=mon0_remote, path=client_keyring, sudo=True)
                    teuthology.sudo_write_file(remote=remot, path=client_keyring, data=key_data, perms="0644")
                    teuthology.sudo_write_file(remote=remot, path=admin_keyring_path, data=admin_keyring, perms="0644")
                    teuthology.sudo_write_file(remote=remot, path=conf_path, data=conf_data, perms="0644")

            if mds_nodes:
                log.info("Configuring CephFS...")
                ceph_fs = Filesystem(ctx, admin_remote=clients.remotes.keys()[0])
                if not ceph_fs.legacy_configured():
                    ceph_fs.create()
        elif not config.get("only_mon"):
            raise RuntimeError("The cluster is NOT operational due to insufficient OSDs")
        yield

    except Exception:
        log.info("Error encountered, logging exception before tearing down ceph-deploy")
        log.info(traceback.format_exc())
        raise
    finally:
        if config.get("keep_running"):
            return
        log.info("Stopping ceph...")
        ctx.cluster.run(
            args=[
                "sudo",
                "stop",
                "ceph-all",
                run.Raw("||"),
                "sudo",
                "service",
                "ceph",
                "stop",
                run.Raw("||"),
                "sudo",
                "systemctl",
                "stop",
                "ceph.target",
            ]
        )

        # Are you really not running anymore?
        # try first with the init tooling
        # ignoring the status so this becomes informational only
        ctx.cluster.run(
            args=[
                "sudo",
                "status",
                "ceph-all",
                run.Raw("||"),
                "sudo",
                "service",
                "ceph",
                "status",
                run.Raw("||"),
                "sudo",
                "systemctl",
                "status",
                "ceph.target",
            ],
            check_status=False,
        )

        # and now just check for the processes themselves, as if upstart/sysvinit
        # is lying to us. Ignore errors if the grep fails
        ctx.cluster.run(
            args=["sudo", "ps", "aux", run.Raw("|"), "grep", "-v", "grep", run.Raw("|"), "grep", "ceph"],
            check_status=False,
        )

        if ctx.archive is not None:
            # archive mon data, too
            log.info("Archiving mon data...")
            path = os.path.join(ctx.archive, "data")
            os.makedirs(path)
            mons = ctx.cluster.only(teuthology.is_type("mon"))
            for remote, roles in mons.remotes.iteritems():
                for role in roles:
                    if role.startswith("mon."):
                        teuthology.pull_directory_tarball(remote, "/var/lib/ceph/mon", path + "/" + role + ".tgz")

            log.info("Compressing logs...")
            run.wait(
                ctx.cluster.run(
                    args=[
                        "sudo",
                        "find",
                        "/var/log/ceph",
                        "-name",
                        "*.log",
                        "-print0",
                        run.Raw("|"),
                        "sudo",
                        "xargs",
                        "-0",
                        "--no-run-if-empty",
                        "--",
                        "gzip",
                        "--",
                    ],
                    wait=False,
                )
            )

            log.info("Archiving logs...")
            path = os.path.join(ctx.archive, "remote")
            os.makedirs(path)
            for remote in ctx.cluster.remotes.iterkeys():
                sub = os.path.join(path, remote.shortname)
                os.makedirs(sub)
                teuthology.pull_directory(remote, "/var/log/ceph", os.path.join(sub, "log"))

        # Prevent these from being undefined if the try block fails
        all_nodes = get_all_nodes(ctx, config)
        purge_nodes = "./ceph-deploy purge" + " " + all_nodes
        purgedata_nodes = "./ceph-deploy purgedata" + " " + all_nodes

        log.info("Purging package...")
        execute_ceph_deploy(purge_nodes)
        log.info("Purging data...")
        execute_ceph_deploy(purgedata_nodes)