def test_msd(test_info, msd):
"""MSD endpoint tests"""
# Simple read
mbr = msd.scsi_read10(0, 1)
test_info.info("MBR[0:16]: %s" % mbr[0:16])
# Test FAT filesystem
fat = Fat(msd)
print(fat.mbr)
# Grab entries in the root directory
root_dir = fat.root_dir
for entry in root_dir:
if entry["DIR_Name"][0] != "\0":
print(entry)
# Trigger a remount
dir_idx = root_dir.find_free_entry_index()
root_dir[dir_idx]["DIR_Name"] = "REFRESH ACT"
root_dir_data = root_dir.pack()
msd.scsi_write10(root_dir.sector, root_dir_data)
test_info.info("Added file to root directory")
start = time.time()
while time.time() - start < DISMOUNT_TIME_S:
try:
msd.scsi_read10(0, 1)
except msd.SCSIError:
test_info.info("Dismount detected")
break
else:
test_info.failure("Device failed to dismount")
start = time.time()
while time.time() - start < DISMOUNT_TIME_S:
try:
msd.scsi_read10(0, 1)
test_info.info("Mount detected")
break
except msd.SCSIError:
pass
else:
test_info.failure("Device failed to mount")
def test_all(test_info, cdc, hid, msd):
"""Test all endpoints in parallel"""
mutex = threading.RLock()
terminate = False
error_msg_list = []
def _safe_print(message):
"""Thread safe wrapper to print messages"""
with mutex:
print(message)
def _test_msd():
"""MSD thread entry point for parallel testing"""
try:
_safe_print("msd started")
msd_data = msd.scsi_read10(100, 1)
while not terminate:
#msd_data = 'x' * 1024 * 16 # 16KB
msd.scsi_write10(100, msd_data)
_safe_print("msd end")
except:
error_msg_list.append("MSD test failed")
raise
def _test_cdc():
"""CDC thread entry point for parallel testing"""
try:
_safe_print("cdc started")
while not terminate:
cdc.set_line_coding(115200)
cdc.get_line_coding()
cdc.send_break(cdc.SEND_BREAK_ON)
cdc.send_break(cdc.SEND_BREAK_OFF)
cdc.read(1024)
cdc.write("Hello world")
cdc.read(1024)
_safe_print("cdc end")
except:
error_msg_list.append("CDC test failed")
raise
def _test_hid():
"""HID thread entry point for parallel testing"""
try:
_safe_print("hid started")
data = bytearray(64)
data[0] = 0x80
while not terminate:
hid.set_report(data)
resp = hid.get_report(64)
assert resp[0] == 0x80
_safe_print("hid end")
except:
error_msg_list.append("HID test failed")
raise
thread_list = []
for function in (_test_msd, _test_cdc, _test_hid):
thread = threading.Thread(target=function)
thread.start()
thread_list.append(thread)
time.sleep(10)
terminate = True
for thread in thread_list:
thread.join()
for error in error_msg_list:
test_info.failure(error)
def test_msd_stall(test_info, msd):
"""Test stalls coming at various times in the middle of MSD xfers"""
fat = Fat(msd)
root_dir = fat.root_dir
dir_idx = root_dir.find_free_entry_index()
root_dir[dir_idx]["DIR_Name"] = "REFRESH ACT"
root_dir_data = root_dir.pack()
# Test that a write fails if media is removed after the CBW
# stage but before the CSW stage
msd.scsi_write10(root_dir.sector, root_dir_data)
msd.delay_cbw_to_data = 1.0
retval = msd.CSW_STATUS_PASSED
try:
msd.scsi_write10(0, bytearray(512))
test_info.failure("Device failed to stall data stage")
except msd.SCSIError as error:
retval = error.value
msd.delay_cbw_to_data = 0
# Make sure device still works as expected
time.sleep(3)
msd.scsi_read10(0, 1)
msd.scsi_write10(0, bytearray(512))
if retval == msd.CSW_STATUS_FAILED:
test_info.info("Test CBW,Stall,Data OUT - Pass")
else:
test_info.failure("Device returned wrong status")
# Test that a write succeeds even if media is removed
# after the OUT stage but before the CSW stage
msd.scsi_write10(root_dir.sector, root_dir_data)
msd.delay_data_to_csw = 1.0
msd.scsi_write10(0, bytearray(512))
msd.delay_data_to_csw = 0
# Make sure device still works as expected
time.sleep(3)
msd.scsi_read10(0, 1)
msd.scsi_write10(0, bytearray(512))
test_info.info("Test DATA OUT,Stall,CSW - Pass")
# Test that a read succeeds even if media is removed
# after the IN stage but before the CSW stage
msd.scsi_write10(root_dir.sector, root_dir_data)
msd.delay_data_to_csw = 1.0
resp = msd.scsi_read10(0, 1)
assert len(resp) == 512
msd.delay_data_to_csw = 0
# Make sure device still works as expected
time.sleep(3)
msd.scsi_read10(0, 1)
msd.scsi_write10(0, bytearray(512))
test_info.info("Test DATA IN,Stall,CSW - Pass")
# Test that a test unit ready succeeds even if media is removed
# after the CBW stage but before the CSW stage
msd.scsi_write10(root_dir.sector, root_dir_data)
msd.delay_data_to_csw = 1.0
resp = msd.scsi_test_unit_ready()
msd.delay_data_to_csw = 0
# Make sure device still works as expected
time.sleep(3)
msd.scsi_read10(0, 1)
msd.scsi_write10(0, bytearray(512))
if resp == msd.CSW_STATUS_PASSED:
test_info.info("Test CBW,Stall,CSW - Pass")
else:
test_info.failure("Test CBW,Stall,CSW - Failed")
# Test that a test unit ready succeeds even if media is removed
# after the CBW stage but before the CSW stage
msd.scsi_write10(root_dir.sector, root_dir_data)
time.sleep(1.0)
resp = msd.scsi_test_unit_ready()
# Make sure device still works as expected
time.sleep(3)
msd.scsi_read10(0, 1)
msd.scsi_write10(0, bytearray(512))
if resp == msd.CSW_STATUS_FAILED:
test_info.info("Test CBW,Stall,CSW - Pass")
else:
test_info.failure("Test CBW,Stall,CSW - Failed")
