def process_data(self,so, s, e, dst, timezone, step, data_type=None):
'''adjust the data based on the parameters and get storm object data'''
#get meta data and water level
so.fs = self.fs
so.get_meta_data()
so.get_air_meta_data()
so.get_wave_water_level()
if data_type is not None and data_type=="stat":
so.chunk_data()
so.get_wave_statistics()
if data_type is not None and data_type=="wind":
so.get_wind_meta_data()
#get the time from the netCDF file and adjust according to timezone and dst params
start_datetime = uc.convert_ms_to_date(so.sea_time[0], pytz.utc)
end_datetime = uc.convert_ms_to_date(so.sea_time[-1], pytz.utc)
new_times = uc.adjust_from_gmt([start_datetime,end_datetime], timezone, dst)
adjusted_times = np.linspace(uc.date_to_ms(new_times[0]), \
uc.date_to_ms(new_times[1]), len(so.sea_time))
#find the closest starting and ending index according to the params
t_zone = pytz.timezone(timezone)
milli1 = uc.date_to_ms(t_zone.localize(datetime.strptime(s,'%Y/%m/%d %H:%M')))
milli2 = uc.date_to_ms(t_zone.localize(datetime.strptime(e,'%Y/%m/%d %H:%M')))
s_index = find_index(adjusted_times,float(milli1))
e_index = find_index(adjusted_times, float(milli2))
#slice data by the index
adjusted_times = adjusted_times[s_index:e_index:step]
so.raw_water_level = so.raw_water_level[s_index:e_index:step]
so.surge_water_level = so.surge_water_level[s_index:e_index:step]
so.wave_water_level = so.wave_water_level[s_index:e_index:step]
so.interpolated_air_pressure = so.interpolated_air_pressure[s_index:e_index:step]
if data_type is not None and data_type=="wind":
so.sea_time = adjusted_times
so.slice_wind_data()
#This is assuming SO object gets modified by reference
if data_type is not None and data_type=="stat":
s_stat_index = find_index(so.stat_dictionary['time'],float(milli1))
e_stat_index = find_index(so.stat_dictionary['time'], float(milli2))
so.stat_dictionary['time'] = so.stat_dictionary['time'][s_stat_index:e_stat_index]
so.stat_dictionary['Spectrum'] = so.stat_dictionary['Spectrum'][s_stat_index:e_stat_index]
so.stat_dictionary['HighSpectrum'] = so.stat_dictionary['HighSpectrum'][s_stat_index:e_stat_index]
so.stat_dictionary['LowSpectrum'] = so.stat_dictionary['LowSpectrum'][s_stat_index:e_stat_index]
for i in so.statistics:
if i != 'PSD Contour':
so.stat_dictionary[i] = so.stat_dictionary[i][s_stat_index:e_stat_index]
#gather statistics if necessary
return adjusted_times
def create_header(self,so, wind=False):
font = {'family' : 'Bitstream Vera Sans',
'size' : 14}
matplotlib.rc('font', **font)
plt.rcParams['figure.figsize'] = (16,10)
plt.rcParams['figure.facecolor'] = 'white'
self.figure = plt.figure(figsize=(16,10))
#Get the time nums for the statistics
first_date = uc.convert_ms_to_date(so.stat_dictionary['time'][0], pytz.UTC)
last_date = uc.convert_ms_to_date(so.stat_dictionary['time'][-1], pytz.UTC)
new_dates = uc.adjust_from_gmt([first_date,last_date], \
so.timezone,so.daylight_savings)
first_date = mdates.date2num(new_dates[0])
last_date = mdates.date2num(new_dates[1])
time = so.stat_dictionary['time']
self.time_nums = np.linspace(first_date, last_date, len(time))
#Get the time nums for the wave water level
first_date = uc.convert_ms_to_date(so.sea_time[0], pytz.UTC)
last_date = uc.convert_ms_to_date(so.sea_time[-1], pytz.UTC)
new_dates = uc.adjust_from_gmt([first_date,last_date], \
so.timezone,so.daylight_savings)
first_date = mdates.date2num(new_dates[0])
last_date = mdates.date2num(new_dates[1])
time = so.sea_time
self.time_nums2 = np.linspace(first_date, last_date, len(time))
#Read images
logo = image.imread('usgs.png', None)
#Create grids for section formatting
self.grid_spec = gridspec.GridSpec(2, 2,
width_ratios=[1,2],
height_ratios=[1,4]
)
#---------------------------------------Logo Section
ax2 = self.figure.add_subplot(self.grid_spec[0,0])
ax2.set_axis_off()
ax2.axes.get_yaxis().set_visible(False)
ax2.axes.get_xaxis().set_visible(False)
pos1 = ax2.get_position() # get the original position
pos2 = [pos1.x0, pos1.y0 + .07, pos1.width, pos1.height]
ax2.set_position(pos2) # set a new position
ax2.imshow(logo)
def multi_air_pressure(self, mo, title):
ax = self.figure.add_subplot(self.grid_spec[1, 0:])
pos1 = ax.get_position() # get the original position
pos2 = [pos1.x0, pos1.y0, pos1.width, pos1.height + .06]
ax.set_position(pos2) # set a new position
#create the second graph title
first_title = "%s Air Pressure Time Series Comparison" % title
titleText = ax.text(0.5, 1.065,first_title, \
va='center', ha='center', transform=ax.transAxes)
ax.set_ylabel('Air Pressure in Inches of Mercury')
ax.set_xlabel('Timezone GMT')
#plot major grid lines
ax.grid(b=True, which='major', color='grey', linestyle="-")
#x axis formatter for dates (function format_date() below)
ax.xaxis.set_major_formatter(ticker.FuncFormatter(self.format_date))
legend_list, label_list = [], []
for x in mo.storm_objects:
air_pressure = x.raw_air_pressure * unit_conversion.DBAR_TO_INCHES_OF_MERCURY
time = x.air_time
first_date = unit_conversion.convert_ms_to_date(time[0], pytz.UTC)
last_date = unit_conversion.convert_ms_to_date(time[-1], pytz.UTC)
new_dates = unit_conversion.adjust_from_gmt([first_date,last_date], \
mo.timezone,mo.daylight_savings)
first_date = mdates.date2num(new_dates[0])
last_date = mdates.date2num(new_dates[1])
self.time_nums = np.linspace(first_date, last_date, len(time))
p1, = ax.plot(self.time_nums, air_pressure, alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(x.air_stn_station_number, x.air_stn_instrument_id,
x.air_latitude, x.air_longitude))
legend = ax.legend(legend_list,label_list
, \
bbox_to_anchor=(.95, 1.355), loc=1, borderaxespad=0.0, prop={'size':10.3},frameon=False,numpoints=1, \
title="EXPLANATION")
legend.get_title().set_position((-340, 0))
plt.savefig(''.join([mo.output_fname, '_multi_baro.jpg']))
def multi_air_pressure(self, mo, title):
ax = self.figure.add_subplot(self.grid_spec[1,0:])
pos1 = ax.get_position() # get the original position
pos2 = [pos1.x0, pos1.y0, pos1.width, pos1.height + .06]
ax.set_position(pos2) # set a new position
#create the second graph title
first_title = "%s Air Pressure Time Series Comparison" % title
titleText = ax.text(0.5, 1.065,first_title, \
va='center', ha='center', transform=ax.transAxes)
ax.set_ylabel('Air Pressure in Inches of Mercury')
ax.set_xlabel('Timezone GMT')
#plot major grid lines
ax.grid(b=True, which='major', color='grey', linestyle="-")
#x axis formatter for dates (function format_date() below)
ax.xaxis.set_major_formatter(ticker.FuncFormatter(self.format_date))
legend_list, label_list = [], []
for x in mo.storm_objects:
air_pressure = x.raw_air_pressure * unit_conversion.DBAR_TO_INCHES_OF_MERCURY
time = x.air_time
first_date = unit_conversion.convert_ms_to_date(time[0], pytz.UTC)
last_date = unit_conversion.convert_ms_to_date(time[-1], pytz.UTC)
new_dates = unit_conversion.adjust_from_gmt([first_date,last_date], \
mo.timezone,mo.daylight_savings)
first_date = mdates.date2num(new_dates[0])
last_date = mdates.date2num(new_dates[1])
self.time_nums = np.linspace(first_date, last_date, len(time))
p1, = ax.plot(self.time_nums, air_pressure, alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(x.air_stn_station_number, x.air_stn_instrument_id,
x.air_latitude, x.air_longitude))
legend = ax.legend(legend_list,label_list
, \
bbox_to_anchor=(.95, 1.355), loc=1, borderaxespad=0.0, prop={'size':10.3},frameon=False,numpoints=1, \
title="EXPLANATION")
legend.get_title().set_position((-340, 0))
plt.savefig(''.join([mo.output_fname,'_multi_baro.jpg']))
def format_time(self, so, time_type='sea'):
'''Get the appropriate datetime string based on the user input'''
if time_type == 'sea':
format_time = [unit_conversion.convert_ms_to_date(x, pytz.utc) for x in so.sea_time]
if time_type == 'air':
format_time = [unit_conversion.convert_ms_to_date(x, pytz.utc) for x in so.air_time]
if time_type == 'stat':
format_time = [unit_conversion.convert_ms_to_date(x, pytz.utc) for x in so.stat_dictionary['time']]
format_time = unit_conversion.adjust_from_gmt(format_time, so.timezone, so.daylight_savings)
format_time = [x.strftime('%m/%d/%y %H:%M:%S')for x in format_time]
return format_time
def create_baro_header(self, so):
# if self.figure is not None:
# self.figure.cla()
font = {'family': 'Bitstream Vera Sans', 'size': 14}
matplotlib.rc('font', **font)
plt.rcParams['figure.figsize'] = (16, 10)
plt.rcParams['figure.facecolor'] = 'white'
self.figure = plt.figure(figsize=(16, 10))
first_date = unit_conversion.convert_ms_to_date(
so.air_time[0], pytz.UTC)
last_date = unit_conversion.convert_ms_to_date(so.air_time[-1],
pytz.UTC)
new_dates = unit_conversion.adjust_from_gmt([first_date,last_date], \
so.timezone,so.daylight_savings)
first_date = mdates.date2num(new_dates[0])
last_date = mdates.date2num(new_dates[1])
self.time_nums = np.linspace(first_date, last_date, len(so.air_time))
#create dataframe
#Read images
logo = image.imread('usgs.png', None)
#Create grids for section formatting
self.grid_spec = gridspec.GridSpec(2,
2,
width_ratios=[1, 2],
height_ratios=[1, 4])
#---------------------------------------Logo Section
ax2 = self.figure.add_subplot(self.grid_spec[0, 0])
ax2.set_axis_off()
ax2.axes.get_yaxis().set_visible(False)
ax2.axes.get_xaxis().set_visible(False)
pos1 = ax2.get_position() # get the original position
pos2 = [pos1.x0, pos1.y0 + .07, pos1.width, pos1.height]
ax2.set_position(pos2) # set a new position
ax2.imshow(logo)
def format_date(x,arb=None):
'''Format dates so that they are padded away from the x-axis'''
scale_index = int(float(len(so.stat_dictionary['time'])/2500.0) * x)
if scale_index >= len(so.stat_dictionary['time']):
scale_index = len(so.stat_dictionary['time']) -1
date = unit_conversion.convert_ms_to_date(so.stat_dictionary['time'][scale_index], pytz.UTC)
format_date = mdates.date2num(date)
date_str = mdates.num2date(format_date).strftime('%b-%d-%Y \n %H:%M')
return ''.join([' ','\n',date_str])
def format_time(self, so, time_type='sea'):
'''Get the appropriate datetime string based on the user input'''
if time_type == 'sea':
format_time = [
unit_conversion.convert_ms_to_date(x, pytz.utc)
for x in so.sea_time
]
if time_type == 'air':
format_time = [
unit_conversion.convert_ms_to_date(x, pytz.utc)
for x in so.air_time
]
if time_type == 'stat':
format_time = [
unit_conversion.convert_ms_to_date(x, pytz.utc)
for x in so.stat_dictionary['time']
]
format_time = unit_conversion.adjust_from_gmt(format_time, so.timezone,
so.daylight_savings)
format_time = [x.strftime('%m/%d/%y %H:%M:%S') for x in format_time]
return format_time
def convert_formatted_time(self, time_data, tzinfo, daylight_savings):
'''Converts ms to date time objects and formats to desired timezone'''
date_times = uc.convert_ms_to_date(time_data, tzinfo)
return uc.adjust_from_gmt(date_times, tzinfo, daylight_savings)
def multi_water_level(self,mo,title, mode='Raw'):
self.create_header()
ax = self.figure.add_subplot(self.grid_spec[1,0:])
pos1 = ax.get_position() # get the original position
pos2 = [pos1.x0, pos1.y0, pos1.width, pos1.height + .06]
ax.set_position(pos2) # set a new position
#create the second graph title
first_title = "%s %s Water Level Time Series Comparison" % (title, mode)
titleText = ax.text(0.5, 1.065,first_title, \
va='center', ha='center', transform=ax.transAxes)
ax.set_ylabel('Water Level in Feet')
ax.set_xlabel('Timezone GMT')
#plot major grid lines
ax.grid(b=True, which='major', color='grey', linestyle="-")
#x axis formatter for dates (function format_date() below)
ax.xaxis.set_major_formatter(ticker.FuncFormatter(self.format_date))
legend_list, label_list = [], []
air, sea, sea_file, air_file = False, False, '', ''
file_types = ['.nc']
for x in mo.storm_objects:
first_date = unit_conversion.convert_ms_to_date(x.sea_time[0], pytz.UTC)
last_date = unit_conversion.convert_ms_to_date(x.sea_time[-1], pytz.UTC)
new_dates = unit_conversion.adjust_from_gmt([first_date,last_date], \
mo.timezone,mo.daylight_savings)
first_date = mdates.date2num(new_dates[0])
last_date = mdates.date2num(new_dates[1])
self.time_nums = np.linspace(first_date, last_date, len(x.sea_time))
if mode=='Surge':
p1, = ax.plot(self.time_nums, x.surge_water_level * unit_conversion.METER_TO_FEET, alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(x.stn_station_number, x.stn_instrument_id,
x.latitude, x.longitude))
if mode=='Wave':
p1, = ax.plot(self.time_nums, x.wave_water_level * unit_conversion.METER_TO_FEET, alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(x.stn_station_number, x.stn_instrument_id,
x.latitude, x.longitude))
if mode=='Raw':
p1, = ax.plot(self.time_nums, x.raw_water_level * unit_conversion.METER_TO_FEET, alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(x.stn_station_number, x.stn_instrument_id,
x.latitude, x.longitude))
print(x.latitude,',',x.longitude)
legend = ax.legend(legend_list,label_list
, \
bbox_to_anchor=(.95, 1.355), loc=1, borderaxespad=0.0, prop={'size':10.3},frameon=False,numpoints=1, \
title="EXPLANATION")
legend.get_title().set_position((-340, 0))
plt.savefig(''.join([mo.output_fname,'_multi_',mode.lower(),'.jpg']))
plt.close(self.figure)
def multi_air_pressure(self,path, title):
self.create_header()
ax = self.figure.add_subplot(self.grid_spec[1,0:])
pos1 = ax.get_position() # get the original position
pos2 = [pos1.x0, pos1.y0, pos1.width, pos1.height + .06]
ax.set_position(pos2) # set a new position
#create the second graph title
first_title = "%s Air Pressure Time Series Comparison" % title
titleText = ax.text(0.5, 1.065,first_title, \
va='center', ha='center', transform=ax.transAxes)
ax.set_ylabel('Air Pressure in Inches of Mercury')
ax.set_xlabel('Timezone GMT')
#plot major grid lines
ax.grid(b=True, which='major', color='grey', linestyle="-")
#x axis formatter for dates (function format_date() below)
ax.xaxis.set_major_formatter(ticker.FuncFormatter(self.format_date))
legend_list, label_list = [], []
file_types = ['.nc']
for root, sub_folders, files in os.walk(path):
for file_in_root in files:
index = file_in_root.rfind('.')
if file_in_root[index:] in file_types:
file = ''.join([root,'\\',file_in_root])
try:
air_pressure = nc.get_air_pressure(file) * unit_conversion.DBAR_TO_INCHES_OF_MERCURY
time = nc.get_time(file)
first_date = unit_conversion.convert_ms_to_date(time[0], pytz.UTC)
last_date = unit_conversion.convert_ms_to_date(time[-1], pytz.UTC)
first_date = mdates.date2num(first_date)
last_date = mdates.date2num(last_date)
self.time_nums = np.linspace(first_date, last_date, len(time))
lat = nc.get_variable_data(file, 'latitude')
lon = nc.get_variable_data(file, 'longitude')
stn_id = nc.get_global_attribute(file, 'stn_instrument_id')
stn_station = nc.get_global_attribute(file, 'stn_station_number')
p1, = ax.plot(self.time_nums, air_pressure, alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(stn_id, stn_station, lat, lon))
except:
pass
legend = ax.legend(legend_list,label_list
, \
bbox_to_anchor=(.95, 1.355), loc=1, borderaxespad=0.0, prop={'size':10.3},frameon=False,numpoints=1, \
title="EXPLANATION")
legend.get_title().set_position((-340, 0))
plt.savefig('b')
def multi_water_level(self,path,title, mode='Raw'):
self.create_header()
ax = self.figure.add_subplot(self.grid_spec[1,0:])
pos1 = ax.get_position() # get the original position
pos2 = [pos1.x0, pos1.y0, pos1.width, pos1.height + .06]
ax.set_position(pos2) # set a new position
#create the second graph title
first_title = "%s %s Water Level Time Series Comparison" % (title, mode)
titleText = ax.text(0.5, 1.065,first_title, \
va='center', ha='center', transform=ax.transAxes)
ax.set_ylabel('Water Level in Feet')
ax.set_xlabel('Timezone GMT')
#plot major grid lines
ax.grid(b=True, which='major', color='grey', linestyle="-")
#x axis formatter for dates (function format_date() below)
ax.xaxis.set_major_formatter(ticker.FuncFormatter(self.format_date))
legend_list, label_list = [], []
air, sea, sea_file, air_file = False, False, '', ''
file_types = ['.nc']
for root, sub_folders, files in os.walk(path):
for file_in_root in files:
index = file_in_root.rfind('.')
if file_in_root[index:] in file_types:
file = ''.join([root,'\\',file_in_root])
try:
nc.get_pressure(file)
sea = True
sea_file = file
except:
try:
nc.get_air_pressure(file)
air = True
air_file = file
except:
pass
if sea and air:
sea, air = False, False
so = StormOptions()
so.air_fname = air_file
so.sea_fname = sea_file
so.timezone = 'GMT'
so.daylight_savings = False
so.get_meta_data()
so.get_air_meta_data()
so.get_raw_water_level()
so.get_surge_water_level()
so.test_water_elevation_below_sensor_orifice_elvation()
so.get_wave_water_level()
first_date = unit_conversion.convert_ms_to_date(so.sea_time[0], pytz.UTC)
last_date = unit_conversion.convert_ms_to_date(so.sea_time[-1], pytz.UTC)
first_date = mdates.date2num(first_date)
last_date = mdates.date2num(last_date)
self.time_nums = np.linspace(first_date, last_date, len(so.sea_time))
lat = nc.get_variable_data(sea_file, 'latitude')
lon = nc.get_variable_data(sea_file, 'longitude')
stn_id = nc.get_global_attribute(sea_file, 'stn_instrument_id')
stn_station = nc.get_global_attribute(sea_file, 'stn_station_number')
if mode=='Surge':
p1, = ax.plot(self.time_nums, so.surge_water_level, alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(stn_id, stn_station, lat, lon))
if mode=='Wave':
p1, = ax.plot(self.time_nums, so.wave_water_level, alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(stn_id, stn_station, lat, lon))
if mode=='Raw':
p1, = ax.plot(self.time_nums, so.raw_water_level, alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(stn_id, stn_station, lat, lon))
legend = ax.legend(legend_list,label_list
, \
bbox_to_anchor=(.95, 1.355), loc=1, borderaxespad=0.0, prop={'size':10.3},frameon=False,numpoints=1, \
title="EXPLANATION")
legend.get_title().set_position((-340, 0))
plt.savefig(''.join([title,mode]))
def make_depth_file(water_fname, air_fname, out_fname, method='combo', purpose='storm_surge', csv = False, step = 1, \
tz = None, dayLightSavings = None, graph = True):
"""Adds depth information to a water pressure file.
"""
#These two declarations may not be used for the new linear wave theory calculations
# device_depth = -1 * nc.get_device_depth(water_fname)
# water_depth = nc.get_water_depth(water_fname)
#Get the timestep, sea pressure, time and qc
timestep = 1 / nc.get_frequency(water_fname)
sea_pressure = nc.get_pressure(water_fname)
sea_time = nc.get_time(water_fname)
# sea_qc = nc.get_pressure_qc(water_fname)
#This is going to be reflected by O(t)
init_orifice_elevation, final_orifice_elvation = \
nc.get_sensor_orifice_elevation(water_fname)
O = np.linspace(init_orifice_elevation, final_orifice_elvation, len(sea_pressure))
#This if going to be reflected by B(t)
init_land_surface_elevation, final_land_surface_elevation = \
nc.get_land_surface_elevation(water_fname)
B = np.linspace(init_land_surface_elevation, final_land_surface_elevation, len(sea_pressure))
#Sensor orifice Elevation Minus Land Surface Elevation
X = O - B
#Get air pressure, time, interpolation, subtract from sea_pressure, and get air qc data
raw_air_pressure = nc.get_air_pressure(air_fname)
instr_dict = nc.get_instrument_data(air_fname, 'air_pressure')
air_time = nc.get_time(air_fname)
air_pressure = np.interp(sea_time, air_time, raw_air_pressure,
left=np.NaN, right=np.NaN)
sea_pressure = sea_pressure - air_pressure
raw_pressure = sea_pressure
sea_pressure[np.where(air_pressure == np.NaN)] = np.NaN
#Get index of first and last point of overlap
itemindex = np.where(~np.isnan(sea_pressure))
begin = itemindex[0][0]
end = itemindex[0][len(itemindex[0]) - 1]
print('indexes',begin,end)
#Cut off the portion of time series that does not overlap
sea_time = sea_time[begin:end]
sea_pressure = sea_pressure[begin:end]
air_pressure = air_pressure[begin:end]
raw_pressure = raw_pressure[begin:end]
O = O[begin:end]
X = X[begin:end]
#get the mean of the sea pressure
sea_pressure_mean = np.mean(sea_pressure)
print(sea_pressure_mean)
sea_pressure = sea_pressure - sea_pressure_mean
#if for storm surge low pass the pressure time series
if purpose == 'storm_surge':
sea_pressure = p2d.lowpass_filter(sea_pressure)
sea_pressure = sea_pressure + sea_pressure_mean
print('sugre pressure max', np.max(sea_pressure), len(sea_pressure))
elif purpose == 'surface_waves':
filtered_pressure = p2d.lowpass_filter(sea_pressure)
sea_pressure = sea_pressure - filtered_pressure
plt.plot(sea_time,sea_pressure, alpha=0.5)
plt.plot(sea_time,filtered_pressure, alpha=0.5)
plt.savefig('test.jpg')
sea_pressure = sea_pressure + sea_pressure_mean
elif purpose == 'get_max':
filtered_pressure = p2d.lowpass_filter(sea_pressure)
wave_sea_pressure = sea_pressure - filtered_pressure
filtered_pressure = filtered_pressure + sea_pressure_mean
p = sea_pressure + sea_pressure_mean
# sea_pressure = sea_pressure + sea_pressure_mean
surge_depth = p2d.hydrostatic_method(filtered_pressure)
wave_depth = p2d.hydrostatic_method(wave_sea_pressure)
combined_depth = p2d.hydrostatic_method(p)
final_depth = np.array(O+surge_depth+wave_depth)
index = final_depth.argmax()
print(O[0], O[-1])
print(final_depth[index] * unit_conversion.METER_TO_FEET, \
unit_conversion.convert_ms_to_datestring(sea_time[index], pytz.UTC))
return (final_depth[index], sea_time[index])
# air_qc, bad_data = DataTests.run_tests(air_pressure,1,1)
#"combo" refers to linear wave theory, "naive" refers to hydrostatic
if method == 'combo':
pass
# depth = p2d.combo_method(sea_time, sea_pressure,
# device_depth, water_depth, timestep)
elif method == 'naive':
#return sensor orifice elevation plus the hydrostatic calculation of sea pressure
depth = O + p2d.hydrostatic_method(sea_pressure)
print('max depth', np.max(depth))
raw_depth = O + p2d.hydrostatic_method(raw_pressure)
if len(depth) == len(sea_pressure) - 1: # this is questionable
depth = np.append(depth, np.NaN)
if purpose == 'storm_surge':
nc.custom_copy(water_fname, out_fname, begin, end, mode = 'storm_surge', step=step)
nc.set_global_attribute(out_fname, 'time_coverage_resolution','P1.00S')
else:
#copy all attributes from sea_pressure file
nc.custom_copy(water_fname, out_fname, begin, end, mode = 'storm_surge', step=step)
# shutil.copy(water_fname, out_fname)
# sea_uuid = nc.get_global_attribute(water_fname, 'uuid')
# nc.set_var_attribute(water_fname, 'sea_pressure', 'sea_uuid', sea_uuid)
# nc.set_global_attribute(out_fname, 'uuid', uuid.uuid4())
# append air pressure
nc.append_air_pressure(out_fname, air_pressure[::step], air_fname)
nc.set_instrument_data(out_fname, 'air_pressure', instr_dict)
air_uuid = nc.get_global_attribute(air_fname, 'uuid')
nc.set_var_attribute(out_fname, 'air_pressure', 'air_uuid', air_uuid)
#update the lat and lon comments
lat_comment = nc.get_variable_attr(out_fname, 'latitude', 'comment')
nc.set_var_attribute(out_fname, 'latitude', 'comment', \
''.join([lat_comment, ' Latitude of sea pressure sensor used to derive ' \
'sea surface elevation.']))
lon_comment = nc.get_variable_attr(out_fname, 'longitude', 'comment')
nc.set_var_attribute(out_fname, 'longitude', 'comment', \
''.join([lon_comment, ' Longitude of sea pressure sensor used to derive ' \
'sea surface elevation.']))
#set sea_pressure instrument data to global variables in water_level netCDF
sea_instr_data = nc.get_instrument_data(water_fname,'sea_pressure')
for x in sea_instr_data:
attrname = ''.join(['sea_pressure_',x])
nc.set_global_attribute(out_fname,attrname,sea_instr_data[x])
nc.set_global_attribute(out_fname,'summary','This file contains two time series: 1)'
'air pressure 2) sea surface elevation. The latter was derived'
' from a time series of high frequency sea pressure measurements '
' adjusted using the former and then lowpass filtered to remove '
' waves of period 1 second or less.')
lat = nc.get_variable_data(out_fname, 'latitude')
lon = nc.get_variable_data(out_fname, 'longitude')
stn_station = nc.get_global_attribute(out_fname, 'stn_station_number')
# stn_id = nc.get_global_attribute(out_fname, 'stn_instrument_id')
first_stamp = nc.get_global_attribute(out_fname, 'time_coverage_start')
last_stamp = nc.get_global_attribute(out_fname, 'time_coverage_end')
nc.set_global_attribute(out_fname,'title','Calculation of water level at %.4f latitude,'
' %.4f degrees longitude from the date range of %s to %s.'
% (lat,lon,first_stamp,last_stamp))
# nc.append_depth_qc(out_fname, sea_qc[begin:end], air_qc, purpose)
nc.append_depth(out_fname, depth[::step])
nc.append_variable(out_fname, 'raw_depth', raw_depth[::step], 'raw_depth', 'raw_depth')
nc.set_var_attribute(out_fname, 'water_surface_height_above_reference_datum', \
'air_uuid', air_uuid)
if csv == True:
#adjust date times to appropriate time zone
format_time = [unit_conversion.convert_ms_to_date(x, pytz.utc) for x in sea_time[::step]]
format_time = unit_conversion.adjust_from_gmt(format_time, tz, dayLightSavings)
format_time = [x.strftime('%m/%d/%y %H:%M:%S') for x in format_time]
#convert decibars to inches of mercury
format_air_pressure = air_pressure * unit_conversion.DBAR_TO_INCHES_OF_MERCURY
#convert meters to feet
format_depth = depth * unit_conversion.METER_TO_FEET
if dayLightSavings != None and dayLightSavings == True:
column1 = '%s Daylight Savings Time' % tz
else:
column1 = '%s Time' % tz
excelFile = pd.DataFrame({column1: format_time,
'Air Pressure in Inches of Hg': format_air_pressure[::step],
'Storm Tide Water Level in Feet': format_depth[::step]})
#append file name to new excel file
last_index = out_fname.find('.')
out_fname = out_fname[0:last_index]
last_index = out_fname.find('.')
#save with csv extension if not already done so
if out_fname[last_index:] != '.csv':
if last_index < 0:
out_file_name = ''.join([out_fname,'.csv'])
else:
out_file_name = ''.join([out_fname[0:last_index],'.csv'])
else:
out_file_name = out_fname
with open(out_file_name, 'w') as csvfile:
writer = csv_package.writer(csvfile, delimiter=',')
csv_header = ["","Latitude: %.4f" % lat, 'Longitude: %.4f' % lon, \
'STN_Station_Number: %s' % stn_station]
writer.writerow(csv_header)
excelFile.to_csv(path_or_buf=out_file_name, mode='a', columns=[column1,
'Water Level in Feet',
'Air Pressure in Inches of Hg'])
def create_header(self,so, wind=False):
# if self.figure is not None:
#
# self.figure.cla()
if wind == True:
font = {'family' : 'Bitstream Vera Sans',
'size' : 10}
matplotlib.rc('font', **font)
plt.rcParams['figure.facecolor'] = 'white'
self.figure = plt.figure(figsize=(16,10))
else:
font = {'family' : 'Bitstream Vera Sans',
'size' : 14}
matplotlib.rc('font', **font)
plt.rcParams['figure.figsize'] = (16,10)
plt.rcParams['figure.facecolor'] = 'white'
self.figure = plt.figure(figsize=(16,10))
first_date = unit_conversion.convert_ms_to_date(so.sea_time[0], pytz.UTC)
last_date = unit_conversion.convert_ms_to_date(so.sea_time[-1], pytz.UTC)
new_dates = unit_conversion.adjust_from_gmt([first_date,last_date], \
so.timezone,so.daylight_savings)
first_date = mdates.date2num(new_dates[0])
last_date = mdates.date2num(new_dates[1])
time = so.sea_time
self.time_nums = np.linspace(first_date, last_date, len(time))
self.time_nums2 = np.linspace(first_date, last_date, len(time))
if self.int_units == True:
#create dataframe in meters
graph_data = {'Pressure': pd.Series(so.interpolated_air_pressure,index=time),
# 'PressureQC': pd.Series(air_qc, index=time),
'SurgeDepth': pd.Series(so.surge_water_level, index=time),
'RawDepth': pd.Series(so.raw_water_level, index=time)
}
else:
#create dataframe
graph_data = {'Pressure': pd.Series(so.interpolated_air_pressure * unit_conversion.DBAR_TO_INCHES_OF_MERCURY,index=time),
# 'PressureQC': pd.Series(air_qc, index=time),
'SurgeDepth': pd.Series(so.surge_water_level * unit_conversion.METER_TO_FEET, index=time),
'RawDepth': pd.Series(so.raw_water_level * unit_conversion.METER_TO_FEET, index=time)
}
self.df = pd.DataFrame(graph_data)
#Read images
logo = image.imread('usgs.png', None)
#Create grids for section formatting
if wind == False:
self.grid_spec = gridspec.GridSpec(2, 2,
width_ratios=[1,2],
height_ratios=[1,4]
)
else:
first_date = unit_conversion.convert_ms_to_date(so.wind_time[0], pytz.UTC)
print(so.wind_time[-1])
last_date = unit_conversion.convert_ms_to_date(so.wind_time[-1], pytz.UTC)
new_dates = unit_conversion.adjust_from_gmt([first_date,last_date], \
so.timezone,so.daylight_savings)
first_date = mdates.date2num(new_dates[0])
last_date = mdates.date2num(new_dates[1])
self.wind_time_nums = np.linspace(first_date, last_date, len(so.wind_time))
self.grid_spec = gridspec.GridSpec(3, 2,
width_ratios=[1,2],
height_ratios=[1,2,2]
)
#---------------------------------------Logo Section
ax2 = self.figure.add_subplot(self.grid_spec[0,0])
ax2.set_axis_off()
ax2.axes.get_yaxis().set_visible(False)
ax2.axes.get_xaxis().set_visible(False)
pos1 = ax2.get_position() # get the original position
pos2 = [pos1.x0, pos1.y0 + .07, pos1.width, pos1.height]
ax2.set_position(pos2) # set a new position
ax2.imshow(logo)
def multi_water_level(self, path, title, mode='Raw'):
self.create_header()
ax = self.figure.add_subplot(self.grid_spec[1, 0:])
pos1 = ax.get_position() # get the original position
pos2 = [pos1.x0, pos1.y0, pos1.width, pos1.height + .06]
ax.set_position(pos2) # set a new position
#create the second graph title
first_title = "%s %s Water Level Time Series Comparison" % (title,
mode)
titleText = ax.text(0.5, 1.065,first_title, \
va='center', ha='center', transform=ax.transAxes)
ax.set_ylabel('Water Level in Feet')
ax.set_xlabel('Timezone GMT')
#plot major grid lines
ax.grid(b=True, which='major', color='grey', linestyle="-")
#x axis formatter for dates (function format_date() below)
ax.xaxis.set_major_formatter(ticker.FuncFormatter(self.format_date))
legend_list, label_list = [], []
air, sea, sea_file, air_file = False, False, '', ''
file_types = ['.nc']
for root, sub_folders, files in os.walk(path):
for file_in_root in files:
index = file_in_root.rfind('.')
if file_in_root[index:] in file_types:
file = ''.join([root, '\\', file_in_root])
try:
nc.get_pressure(file)
sea = True
sea_file = file
except:
try:
nc.get_air_pressure(file)
air = True
air_file = file
except:
pass
if sea and air:
sea, air = False, False
so = StormOptions()
so.air_fname = air_file
so.sea_fname = sea_file
so.timezone = 'GMT'
so.daylight_savings = False
so.get_meta_data()
so.get_air_meta_data()
so.get_raw_water_level()
so.get_surge_water_level()
so.test_water_elevation_below_sensor_orifice_elvation()
so.get_wave_water_level()
first_date = unit_conversion.convert_ms_to_date(
so.sea_time[0], pytz.UTC)
last_date = unit_conversion.convert_ms_to_date(
so.sea_time[-1], pytz.UTC)
first_date = mdates.date2num(first_date)
last_date = mdates.date2num(last_date)
self.time_nums = np.linspace(first_date, last_date,
len(so.sea_time))
lat = nc.get_variable_data(sea_file, 'latitude')
lon = nc.get_variable_data(sea_file, 'longitude')
stn_id = nc.get_global_attribute(
sea_file, 'stn_instrument_id')
stn_station = nc.get_global_attribute(
sea_file, 'stn_station_number')
if mode == 'Surge':
p1, = ax.plot(self.time_nums,
so.surge_water_level,
alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(stn_id, stn_station, lat, lon))
if mode == 'Wave':
p1, = ax.plot(self.time_nums,
so.wave_water_level,
alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(stn_id, stn_station, lat, lon))
if mode == 'Raw':
p1, = ax.plot(self.time_nums,
so.raw_water_level,
alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(stn_id, stn_station, lat, lon))
legend = ax.legend(legend_list,label_list
, \
bbox_to_anchor=(.95, 1.355), loc=1, borderaxespad=0.0, prop={'size':10.3},frameon=False,numpoints=1, \
title="EXPLANATION")
legend.get_title().set_position((-340, 0))
plt.savefig(''.join([title, mode]))
def convert_formatted_time(self, time_data, tzinfo, daylight_savings):
'''Converts ms to date time objects and formats to desired timezone'''
date_times = uc.convert_ms_to_date(time_data, tzinfo)
return uc.adjust_from_gmt(date_times, tzinfo, daylight_savings)
def plot_pressure(self):
#check to see if there is already a graph if so destroy it
if self.canvas != None:
self.toolbar.destroy()
self.canvas.get_tk_widget().destroy()
font = {'family': 'Bitstream Vera Sans', 'size': 11}
matplotlib.rc('font', **font)
plt.rcParams['figure.figsize'] = (12, 7)
plt.rcParams['figure.facecolor'] = 'silver'
#get date times from netCDF file
self.t_dates = nc.get_time(self.fname)
self.first_date = uc.convert_ms_to_date(self.t_dates[0], pytz.UTC)
self.last_date = uc.convert_ms_to_date(self.t_dates[-1], pytz.UTC)
self.new_dates = uc.adjust_from_gmt([self.first_date,self.last_date], \
self.tzstringvar.get(),self.daylightSavings.get())
self.first_date = mdates.date2num(self.new_dates[0])
self.last_date = mdates.date2num(self.new_dates[1])
#get sea or air pressure depending on the radio button
if self.methodvar.get() == "sea":
p = nc.get_pressure(self.fname)
else:
p = nc.get_air_pressure(self.fname)
#get quality control data
# qc = nc.get_flags(self.fname)
self.fig = fig = plt.figure(figsize=(12, 7))
self.ax = fig.add_subplot(111)
#title
self.ax.set_title('Chop Pressure File\n(Timezone in %s time)' %
self.tzstringvar.get())
#x axis formatter for dates (function format_date() below)
self.ax.xaxis.set_major_formatter(
ticker.FuncFormatter(self.format_date))
#converts dates to numbers for matplotlib to consume
self.time_nums = np.linspace(self.first_date, self.last_date,
len(self.t_dates))
#labels, and plot time series
self.line = self.ax.plot(self.time_nums, p, color='blue')
# plt.xlabel('Time (s)')
plt.ylabel('Pressure (dBar)')
#all points that were flagged in the qc data are stored in
#bad_points and bad_times to draw a red x in the graph
# data = {'Pressure': pd.Series(p,index=self.time_nums),
# 'PressureQC': pd.Series(qc, index=self.time_nums)}
# df = pd.DataFrame(data)
#
# df.Pressure[(df['PressureQC'] == 11111111) | (df['PressureQC'] == 1111011)
# | (df['PressureQC'] == 11111110) | (df['PressureQC'] == 11110110)] = np.NaN;
#
#
# self.redx = self.ax.plot(df.index, df.Pressure, 'rx')
#saves state for reloading
#set initial bounds for the time series selection
x1 = self.time_nums[0]
x2 = self.time_nums[-1]
self.left = self.ax.axvline(x1, color='black')
self.right = self.ax.axvline(x2, color='black')
#yellow highlight for selected area in graph
self.patch = self.ax.axvspan(x1,
x2,
alpha=0.25,
color='yellow',
linewidth=0)
#initial set of datestring values
temp_date = mdates.num2date(x1, tz=pytz.timezone(
"GMT")) #tz=pytz.timezone(str(self.tzstringvar.get())))
datestring = temp_date.strftime('%m/%d/%y %H:%M:%S')
self.date1.set(datestring)
temp_date2 = mdates.num2date(x2, tz=pytz.timezone(
"GMT")) #tz=pytz.timezone(str(self.tzstringvar.get())))
datestring2 = temp_date2.strftime('%m/%d/%y %H:%M:%S')
self.date2.set(datestring2)
events = []
def on_click(event):
#capture events and button pressed
events.append(event)
if event.button == 1:
l = self.left
elif event.button == 3:
l = self.right
l.set_xdata([event.xdata, event.xdata])
#get the left slice time data, convert matplotlib num to date
#format date string for the GUI start date field
x1 = self.left.get_xdata()[0]
temp_date = mdates.num2date(x1, tz=pytz.timezone(
"GMT")) #tz=pytz.timezone(str(self.tzstringvar.get())))
datestring = temp_date.strftime('%m/%d/%y %H:%M:%S')
self.plot_event = True
self.date1.set(datestring)
#get the left slice time data, convert matplotlib num to date
#format date string for the GUI start date field
x2 = self.right.get_xdata()[0]
temp_date2 = mdates.num2date(x2, tz=pytz.timezone(
"GMT")) #tz=pytz.timezone(str(self.tzstringvar.get())))
datestring2 = temp_date2.strftime('%m/%d/%y %H:%M:%S')
self.plot_event = True
self.date2.set(datestring2)
xy = [[x1, 0], [x1, 1], [x2, 1], [x2, 0], [x1, 0]]
self.patch.set_xy(xy)
self.canvas.draw()
def patch2(sv):
if self.plot_event == True:
self.plot_event = False
else:
try:
if sv == 1:
date = self.date1.get()
tz = pytz.timezone(
"GMT"
) #tz=pytz.timezone(str(self.tzstringvar.get())))
temp_dt = datetime.strptime(date, '%m/%d/%y %H:%M:%S')
#temp_dt = tz.localize(temp_dt, is_dst=None).astimezone(pytz.UTC)
x1 = mdates.date2num(temp_dt)
self.left.set_xdata([x1, x1])
x2 = self.right.get_xdata()[0]
xy = [[x1, 0], [x1, 1], [x2, 1], [x2, 0], [x1, 0]]
#draw yellow highlight over selected area in graph
self.patch.set_xy(xy)
self.canvas.draw()
else:
x1 = self.left.get_xdata()[0]
date = self.date2.get()
tz = pytz.timezone(
"GMT"
) #tz=pytz.timezone(str(self.tzstringvar.get())))
temp_dt = datetime.strptime(date, '%m/%d/%y %H:%M:%S')
#temp_dt = tz.localize(temp_dt, is_dst=None).astimezone(pytz.UTC)
x2 = mdates.date2num(temp_dt)
self.right.set_xdata([x2, x2])
xy = [[x1, 0], [x1, 1], [x2, 1], [x2, 0], [x1, 0]]
#draw yellow highlight over selected area in graph
#
self.patch.set_xy(xy)
self.canvas.draw()
except:
print('No event occurred')
#add event listener for clicks on the graph
#
self.date1.trace("w", lambda name, index, mode, i=1: patch2(i))
self.date2.trace("w", lambda name, index, mode, i=2: patch2(i))
self.canvas = FigureCanvasTkAgg(self.fig, master=self.root)
self.toolbar = NavigationToolbar2TkAgg(self.canvas, self.root)
self.toolbar.update()
self.canvas.mpl_connect('button_press_event', on_click)
self.canvas.show()
self.canvas.get_tk_widget().pack(side=Tk.TOP, fill=Tk.BOTH, expand=2)
def multi_air_pressure(self, path, title):
self.create_header()
ax = self.figure.add_subplot(self.grid_spec[1, 0:])
pos1 = ax.get_position() # get the original position
pos2 = [pos1.x0, pos1.y0, pos1.width, pos1.height + .06]
ax.set_position(pos2) # set a new position
#create the second graph title
first_title = "%s Air Pressure Time Series Comparison" % title
titleText = ax.text(0.5, 1.065,first_title, \
va='center', ha='center', transform=ax.transAxes)
ax.set_ylabel('Air Pressure in Inches of Mercury')
ax.set_xlabel('Timezone GMT')
#plot major grid lines
ax.grid(b=True, which='major', color='grey', linestyle="-")
#x axis formatter for dates (function format_date() below)
ax.xaxis.set_major_formatter(ticker.FuncFormatter(self.format_date))
legend_list, label_list = [], []
file_types = ['.nc']
for root, sub_folders, files in os.walk(path):
for file_in_root in files:
index = file_in_root.rfind('.')
if file_in_root[index:] in file_types:
file = ''.join([root, '\\', file_in_root])
try:
air_pressure = nc.get_air_pressure(
file) * unit_conversion.DBAR_TO_INCHES_OF_MERCURY
time = nc.get_time(file)
first_date = unit_conversion.convert_ms_to_date(
time[0], pytz.UTC)
last_date = unit_conversion.convert_ms_to_date(
time[-1], pytz.UTC)
first_date = mdates.date2num(first_date)
last_date = mdates.date2num(last_date)
self.time_nums = np.linspace(first_date, last_date,
len(time))
lat = nc.get_variable_data(file, 'latitude')
lon = nc.get_variable_data(file, 'longitude')
stn_id = nc.get_global_attribute(
file, 'stn_instrument_id')
stn_station = nc.get_global_attribute(
file, 'stn_station_number')
p1, = ax.plot(self.time_nums, air_pressure, alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(stn_id, stn_station, lat, lon))
except:
pass
legend = ax.legend(legend_list,label_list
, \
bbox_to_anchor=(.95, 1.355), loc=1, borderaxespad=0.0, prop={'size':10.3},frameon=False,numpoints=1, \
title="EXPLANATION")
legend.get_title().set_position((-340, 0))
plt.savefig('b')
def multi_water_level(self, mo, title, mode='Raw'):
self.create_header()
ax = self.figure.add_subplot(self.grid_spec[1, 0:])
pos1 = ax.get_position() # get the original position
pos2 = [pos1.x0, pos1.y0, pos1.width, pos1.height + .06]
ax.set_position(pos2) # set a new position
#create the second graph title
first_title = "%s %s Water Level Time Series Comparison" % (title,
mode)
titleText = ax.text(0.5, 1.065,first_title, \
va='center', ha='center', transform=ax.transAxes)
ax.set_ylabel('Water Level in Feet')
ax.set_xlabel('Timezone GMT')
#plot major grid lines
ax.grid(b=True, which='major', color='grey', linestyle="-")
#x axis formatter for dates (function format_date() below)
ax.xaxis.set_major_formatter(ticker.FuncFormatter(self.format_date))
legend_list, label_list = [], []
air, sea, sea_file, air_file = False, False, '', ''
file_types = ['.nc']
for x in mo.storm_objects:
first_date = unit_conversion.convert_ms_to_date(
x.sea_time[0], pytz.UTC)
last_date = unit_conversion.convert_ms_to_date(
x.sea_time[-1], pytz.UTC)
new_dates = unit_conversion.adjust_from_gmt([first_date,last_date], \
mo.timezone,mo.daylight_savings)
first_date = mdates.date2num(new_dates[0])
last_date = mdates.date2num(new_dates[1])
self.time_nums = np.linspace(first_date, last_date,
len(x.sea_time))
if mode == 'Surge':
p1, = ax.plot(self.time_nums,
x.surge_water_level *
unit_conversion.METER_TO_FEET,
alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(x.stn_station_number, x.stn_instrument_id,
x.latitude, x.longitude))
if mode == 'Wave':
p1, = ax.plot(self.time_nums,
x.wave_water_level *
unit_conversion.METER_TO_FEET,
alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(x.stn_station_number, x.stn_instrument_id,
x.latitude, x.longitude))
if mode == 'Raw':
p1, = ax.plot(self.time_nums,
x.raw_water_level *
unit_conversion.METER_TO_FEET,
alpha=.5)
legend_list.append(p1)
label_list.append('STN Site ID: %s, STN Instrument ID: %s, Lat: %s, Lon: %s' \
%(x.stn_station_number, x.stn_instrument_id,
x.latitude, x.longitude))
print(x.latitude, ',', x.longitude)
legend = ax.legend(legend_list,label_list
, \
bbox_to_anchor=(.95, 1.355), loc=1, borderaxespad=0.0, prop={'size':10.3},frameon=False,numpoints=1, \
title="EXPLANATION")
legend.get_title().set_position((-340, 0))
plt.savefig(''.join([mo.output_fname, '_multi_',
mode.lower(), '.jpg']))
plt.close(self.figure)
def Storm_Tide_Water_Level(self, so):
ax = self.figure.add_subplot(self.grid_spec[1, 0:])
pos1 = ax.get_position() # get the original position
pos2 = [pos1.x0, pos1.y0, pos1.width, pos1.height + .06]
ax.set_position(pos2) # set a new position
first_title = "Storm Tide Water Elevation, Latitude: %.4f Longitude: %.4f STN Site ID: %s" \
% (so.latitude,so.longitude,so.stn_station_number)
second_title = "Barometric Pressure, Latitude: %.4f Longitude: %.4f STN Site ID: %s" \
% (so.air_latitude,so.air_longitude,so.air_stn_station_number)
ax.text(0.5, 1.065,first_title, \
va='center', ha='center', transform=ax.transAxes)
ax.text(0.5, 1.03,second_title, \
va='center', ha='center', transform=ax.transAxes)
par1 = ax.twinx()
pos1 = par1.get_position() # get the original position
pos2 = [pos1.x0, pos1.y0, pos1.width, pos1.height + .06]
par1.set_position(pos2) # set a new position
if self.int_units == True:
ax.set_ylabel('Water Elevation in Meters above Datum (%s)' %
so.datum)
par1.set_ylabel('Barometric Pressure in Decibars')
else:
ax.set_ylabel('Water Elevation in Feet above Datum (%s)' %
so.datum)
par1.set_ylabel('Barometric Pressure in Inches of Mercury')
#plot major grid lines
ax.grid(b=True, which='major', color='grey', linestyle="-")
#x axis formatter for dates (function format_date() below)
ax.xaxis.set_major_formatter(ticker.FuncFormatter(self.format_date))
ax.set_xlabel('Timezone: %s' % so.timezone)
#plan on rebuilding the flow of execution, ignore spaghetti for now
depth_min_start = np.min(self.df.SurgeDepth)
depth_idx = np.nanargmax(so.raw_water_level)
tide_idx = np.nanargmax(so.surge_water_level)
if self.int_units == True:
sensor_min = np.min(so.sensor_orifice_elevation)
tide_max = so.surge_water_level[tide_idx]
else:
sensor_min = np.min(so.sensor_orifice_elevation *
unit_conversion.METER_TO_FEET)
tide_max = so.surge_water_level[
tide_idx] * unit_conversion.METER_TO_FEET
depth_time = unit_conversion.convert_ms_to_date(
so.sea_time[depth_idx], pytz.UTC)
tide_time = unit_conversion.convert_ms_to_date(so.sea_time[tide_idx],
pytz.UTC)
format_times = unit_conversion.adjust_from_gmt([depth_time,tide_time], \
so.timezone,so.daylight_savings)
tide_time = format_times[1].strftime('%m/%d/%y %H:%M:%S')
depth_time = format_times[0].strftime('%m/%d/%y %H:%M:%S.%f')
depth_time = depth_time[0:(len(depth_time) - 4)]
tide_num = mdates.date2num(format_times[1])
depth_min = np.floor(depth_min_start * 100.0) / 100.0
if depth_min > (sensor_min - .02):
depth_min = sensor_min - .02
lim_max = np.ceil(tide_max * 100.0) / 100.0
if so.wlYLims is None:
if depth_min < 0:
ax.set_ylim([depth_min * 1.10, lim_max * 1.20])
else:
ax.set_ylim([depth_min * .9, lim_max * 1.20])
else:
so.wlYLims[0] = float("{0:.2f}".format(so.wlYLims[0]))
so.wlYLims[1] = float("{0:.2f}".format(so.wlYLims[1]))
ax.set_ylim([so.wlYLims[0], so.wlYLims[1]])
#
#changes scale so the air pressure is more readable
if self.int_units == True:
minY = np.min(self.df.Pressure) * .99
maxY = np.max(self.df.Pressure) * 1.01
else:
minY = np.floor(np.min(self.df.Pressure))
maxY = np.ceil(np.max(self.df.Pressure))
#adjust the barometric pressure y axis
if so.baroYLims is None:
par1.set_ylim([minY, maxY])
if self.int_units == False:
par1.yaxis.set_major_formatter(FormatStrFormatter('%.1f'))
else:
so.baroYLims[0] = float("{0:.1f}".format(so.baroYLims[0]))
so.baroYLims[1] = float("{0:.1f}".format(so.baroYLims[1]))
if so.baroYLims[1] - so.baroYLims[0] < .5:
par1.set_yticks(np.arange(so.baroYLims[0], so.baroYLims[1],
.1))
par1.set_ylim([so.baroYLims[0], so.baroYLims[1]])
#plot the pressure, depth, and min depth
p1, = par1.plot(self.time_nums, self.df.Pressure, color="red")
p2, = ax.plot(self.time_nums, self.df.SurgeDepth, color="#045a8d")
p3, = ax.plot(self.time_nums,
np.repeat(sensor_min, len(self.df.SurgeDepth)),
linestyle="--",
color="#fd8d3c")
p6, = ax.plot(tide_num,
tide_max,
'^',
markersize=10,
color='#045a8d',
alpha=1)
if self.int_units == True:
max_storm_tide = "Maximum Storm Tide Water Elevation, meters above datum = %.2f at %s" \
% (tide_max, tide_time)
else:
max_storm_tide = "Maximum Storm Tide Water Elevation, feet above datum = %.2f at %s" \
% (tide_max, tide_time)
stringText = par1.text(0.5, 0.948,max_storm_tide, \
bbox={'facecolor':'white', 'alpha':1, 'pad':10}, \
va='center', ha='center', transform=par1.transAxes)
stringText.set_size(11)
#Legend options not needed but for future reference
legend = ax.legend([p2,p3,p1,p6],[
'Storm Tide (Lowpass Filtered) Water Elevation',
'Minimum Recordable Water Elevation',
'Barometric Pressure',
'Maximum Storm Tide Water Elevation'
], \
bbox_to_anchor=(.95, 1.355), loc=1, borderaxespad=0.0, prop={'size':10.3},frameon=False,numpoints=1, \
title="EXPLANATION")
legend.get_title().set_position((-120, 0))
ax.yaxis.set_major_formatter(FormatStrFormatter('%.2f'))
file_name = ''.join([so.output_fname, '_stormtide', '.jpg'])
plt.savefig(file_name)
def select_output_file(self, root):
'''Processes the selected afiles and outputs in format selected'''
#Format the name properly based on the input of the user
if not self.justMax:
og_fname = filedialog.asksaveasfilename()
output_fname = ''
plot_fname = ''
if og_fname != None and og_fname != '' :
last_index = og_fname.find('.')
if og_fname[last_index:] != '.nc':
if last_index < 0:
output_fname = ''.join([og_fname,'.nc'])
plot_fname = ''.join([og_fname,'.jpg'])
else:
output_fname = ''.join([og_fname[0:last_index],'.nc'])
if og_fname[last_index:] != '.jpg':
plot_fname = ''.join([og_fname[0:last_index],'.jpg'])
else:
plot_fname = og_fname
else:
output_fname = og_fname
plot_fname = ''.join([og_fname[0:last_index],'.jpg'])
# dialog = gc.MessageDialog(root, message='Working, this may take up to 60 seconds.',
# title='Processing...', buttons=0, wait=False)
#
# try:
#Get the sea time and air time and determine if there is overlap
sea_t = nc.get_time(self.sea_fname)
if self.air_fname != '':
air_t = nc.get_time(self.air_fname)
if (air_t[-1] < sea_t[0]) or (air_t[0] > sea_t[-1]):
message = ("Air pressure and water pressure files don't "
"cover the same time period!\nPlease choose "
"other files.")
gc.MessageDialog(root, message=message, title='Error!')
return
elif (air_t[0] > sea_t[0] or air_t[-1] < sea_t[-1]):
message = ("The air pressure file doesn't span the "
"entire time period covered by the water pressure "
"file.\nThe period not covered by both files will be "
"chopped")
gc.MessageDialog(root, message=message, title='Warning')
#This creates the depth file/s for storage or use in the graph
script2.make_depth_file(self.sea_fname, self.air_fname,
output_fname, method='naive', purpose='surface_waves', \
csv= self.csvOutput.get(), step=1)
#If graph output is selected get parameters and display graph
if self.graphOutput.get():
baroYLims = []
try:
baroYLims.append(float(self.baroYlim1.get()))
baroYLims.append(float(self.baroYlim2.get()))
except:
baroYLims = None
wlYLims = []
try:
wlYLims.append(float(self.wlYlim1.get()))
wlYLims.append(float(self.wlYlim2.get()))
except:
wlYLims = None
make_depth_graph(0, output_fname, \
self.tzstringvar.get(), self.daylightSavings.get(),
self.methodvar.get(), None,
baroYLims, wlYLims, plot_fname)
#if netCDF output is not selected delete the netCDF file created
if self.netOutput.get() == False:
if os.path.exists(output_fname):
os.remove(output_fname)
gc.MessageDialog(root, message="Success! Files processed.",
title='Success!')
# except:
#
# gc.MessageDialog(root, message="Could not process file/s, please check file type.",
# title='Error')
else:
self.root.focus_force()
else:
sea_t = nc.get_time(self.sea_fname)
if self.air_fname != '':
air_t = nc.get_time(self.air_fname)
if (air_t[-1] < sea_t[0]) or (air_t[0] > sea_t[-1]):
message = ("Air pressure and water pressure files don't "
"cover the same time period!\nPlease choose "
"other files.")
gc.MessageDialog(root, message=message, title='Error!')
return
elif (air_t[0] > sea_t[0] or air_t[-1] < sea_t[-1]):
message = ("The air pressure file doesn't span the "
"entire time period covered by the water pressure "
"file.\nThe period not covered by both files will be "
"chopped")
gc.MessageDialog(root, message=message, title='Warning')
#This creates the depth file/s for storage or use in the graph
final_depth, final_date = script2.make_depth_file(self.sea_fname, self.air_fname,
'arb', method='naive', purpose='get_max', \
csv= False, step=1)
final_depth = final_depth * unit_conversion.METER_TO_FEET
formatted_date = unit_conversion.convert_ms_to_date(final_date, pytz.utc)
formatted_date = unit_conversion.adjust_from_gmt([formatted_date], \
self.tzstringvar.get(), self.daylightSavings.get())
formatted_date = formatted_date[0].strftime('%m/%d/%y %H:%M:%S')
message = 'The max water level in feet is: %.4f\n' \
'The time is: %s' % (final_depth, formatted_date)
gc.MessageDialog(root, message=message, title='Success!')
def create_header(self, so, wind=False):
# if self.figure is not None:
#
# self.figure.cla()
if wind == True:
font = {'family': 'Bitstream Vera Sans', 'size': 10}
matplotlib.rc('font', **font)
plt.rcParams['figure.facecolor'] = 'white'
self.figure = plt.figure(figsize=(16, 10))
else:
font = {'family': 'Bitstream Vera Sans', 'size': 14}
matplotlib.rc('font', **font)
plt.rcParams['figure.figsize'] = (16, 10)
plt.rcParams['figure.facecolor'] = 'white'
self.figure = plt.figure(figsize=(16, 10))
first_date = unit_conversion.convert_ms_to_date(
so.sea_time[0], pytz.UTC)
last_date = unit_conversion.convert_ms_to_date(so.sea_time[-1],
pytz.UTC)
new_dates = unit_conversion.adjust_from_gmt([first_date,last_date], \
so.timezone,so.daylight_savings)
first_date = mdates.date2num(new_dates[0])
last_date = mdates.date2num(new_dates[1])
time = so.sea_time
self.time_nums = np.linspace(first_date, last_date, len(time))
if self.int_units == True:
#create dataframe in meters
graph_data = {
'Pressure': pd.Series(so.interpolated_air_pressure,
index=time),
# 'PressureQC': pd.Series(air_qc, index=time),
'SurgeDepth': pd.Series(so.surge_water_level, index=time),
'RawDepth': pd.Series(so.raw_water_level, index=time)
}
else:
#create dataframe
graph_data = {
'Pressure':
pd.Series(so.interpolated_air_pressure *
unit_conversion.DBAR_TO_INCHES_OF_MERCURY,
index=time),
# 'PressureQC': pd.Series(air_qc, index=time),
'SurgeDepth':
pd.Series(so.surge_water_level * unit_conversion.METER_TO_FEET,
index=time),
'RawDepth':
pd.Series(so.raw_water_level * unit_conversion.METER_TO_FEET,
index=time)
}
self.df = pd.DataFrame(graph_data)
#Read images
logo = image.imread('usgs.png', None)
#Create grids for section formatting
if wind == False:
self.grid_spec = gridspec.GridSpec(2,
2,
width_ratios=[1, 2],
height_ratios=[1, 4])
else:
first_date = unit_conversion.convert_ms_to_date(
so.wind_time[0], pytz.UTC)
print(so.wind_time[-1])
last_date = unit_conversion.convert_ms_to_date(
so.wind_time[-1], pytz.UTC)
new_dates = unit_conversion.adjust_from_gmt([first_date,last_date], \
so.timezone,so.daylight_savings)
first_date = mdates.date2num(new_dates[0])
last_date = mdates.date2num(new_dates[1])
self.wind_time_nums = np.linspace(first_date, last_date,
len(so.wind_time))
self.grid_spec = gridspec.GridSpec(3,
2,
width_ratios=[1, 2],
height_ratios=[1, 2, 2])
#---------------------------------------Logo Section
ax2 = self.figure.add_subplot(self.grid_spec[0, 0])
ax2.set_axis_off()
ax2.axes.get_yaxis().set_visible(False)
ax2.axes.get_xaxis().set_visible(False)
pos1 = ax2.get_position() # get the original position
pos2 = [pos1.x0, pos1.y0 + .07, pos1.width, pos1.height]
ax2.set_position(pos2) # set a new position
ax2.imshow(logo)
def create_header(self,so, psd=False):
#matplotlib options for graph
font = {'family' : 'Bitstream Vera Sans',
'size' : 14}
matplotlib.rc('font', **font)
plt.rcParams['figure.figsize'] = (16,10)
plt.rcParams['figure.facecolor'] = 'white'
#make the figure
self.figure = plt.figure(figsize=(16,10))
#Get the time nums for the statistics
first_date = uc.convert_ms_to_date(so.stat_dictionary['time'][0], pytz.UTC)
last_date = uc.convert_ms_to_date(so.stat_dictionary['time'][-1], pytz.UTC)
new_dates = uc.adjust_from_gmt([first_date,last_date], \
so.timezone,so.daylight_savings)
first_date = mdates.date2num(new_dates[0])
last_date = mdates.date2num(new_dates[1])
time = so.stat_dictionary['time']
self.time_nums = np.linspace(first_date, last_date, len(time))
#Get the time nums for the wave water level
first_date = uc.convert_ms_to_date(so.sea_time[0], pytz.UTC)
last_date = uc.convert_ms_to_date(so.sea_time[-1], pytz.UTC)
new_dates = uc.adjust_from_gmt([first_date,last_date], \
so.timezone,so.daylight_savings)
first_date = mdates.date2num(new_dates[0])
last_date = mdates.date2num(new_dates[1])
time = so.sea_time
self.time_nums2 = np.linspace(first_date, last_date, len(time))
#Read images
logo = image.imread('usgs.png', None)
#Create grids for section formatting
if psd == False:
self.grid_spec = gridspec.GridSpec(2, 2,
width_ratios=[1,2],
height_ratios=[1,4]
)
else:
self.grid_spec = gridspec.GridSpec(2, 2,
width_ratios=[1,2],
height_ratios=[1,7]
)
#---------------------------------------Logo Section
ax2 = self.figure.add_subplot(self.grid_spec[0,0])
ax2.set_axis_off()
ax2.axes.get_yaxis().set_visible(False)
ax2.axes.get_xaxis().set_visible(False)
pos1 = ax2.get_position() # get the original position
if psd == False:
pos2 = [pos1.x0, pos1.y0 + .07, pos1.width, pos1.height]
ax2.set_position(pos2) # set a new position
else:
pos2 = [pos1.x0 - .062, pos1.y0 + .01, pos1.width + .1, pos1.height + .05]
ax2.set_position(pos2) # set a new position
#display logo
ax2.imshow(logo)
def display(self):
# try:
t = nc.get_time(self.filename) / 1000
#get datum
datum = nc.get_geospatial_vertical_reference(self.filename)
# times = nc.get_datetimes(self.file_name)
# d = nc.get_depth(self.filename)
d = nc.get_variable_data(self.filename, 'wave_wl')
tstep = t[1] - t[0]
#STATISTICS FUNCTION AVAILABLE FOR PLOTTING
periodfunc = lambda depth: stats.significant_wave_period(depth, tstep)
sigfunc = stats.significant_wave_height_standard
t10func = lambda depth: stats.ten_percent_wave_height(t, depth)
t1func = lambda depth: stats.one_percent_wave_height(t, depth)
rms_func = lambda depth: stats.rms_wave_height(t, depth)
median_func = lambda depth: stats.median_wave_height(t, depth)
maximum_func = lambda depth: stats.maximum_wave_height(t, depth)
average_func = lambda depth: stats.average_wave_height(t, depth)
average_z_func = lambda depth: stats.average_zero_crossing_period(t, depth)
mean_func = lambda depth: stats.mean_wave_period(t, depth)
crest_func = lambda depth: stats.crest_wave_period(t, depth)
peak_wave_func = lambda depth: stats.peak_wave_period(t, depth)
funcs = {'H1/3': (sigfunc, 'H 1/3 (feet)'), # contains functions and labels
'T1/3': (periodfunc, 'T 1/3 (seconds)'),
'T 10%': (t10func, 'T 10%'),
'T 1%': (t1func, 'T 1%'),
'RMS' : (rms_func, 'RMS'),
'Median': (median_func, 'Median'),
'Maximum': (maximum_func, 'Maximum'),
'Average': (average_func, 'Average'),
'Average Z Cross': (average_z_func, 'Average Z Cross'),
'Mean Wave Period': (mean_func, 'Mean Wave Period'),
'Crest': (crest_func, 'Crest'),
'Peak Wave': (peak_wave_func, 'Peak')}
size = self.sizes[self.chunk_size.get()] * float(self.number.get())
try:
tchunks = stats.split_into_chunks(t, tstep, size)
dchunks = stats.split_into_chunks(d, tstep, size)
except ValueError:
print('no chunks')
tchunks = [t]
dchunks = [d]
t_stat = [np.average(tchunk) for tchunk in tchunks]
# t_stat = [uc.convert_ms_to_datestring(t, pytz.utc) for t in t_stat]
func = funcs[self.stat.get()][0]
label = funcs[self.stat.get()][1]
d_stat = [func(dchunk) for dchunk in dchunks]
print(d_stat)
#The first x axis time conversion
t = [uc.convert_ms_to_date(x * 1000, pytz.UTC) for x in t]
t = uc.adjust_from_gmt(t, self.tzstringvar.get(), self.daylightSavings.get())
t = [mdates.date2num(x) for x in t]
#The second x axis time conversion
t_stat = [uc.convert_ms_to_date(x * 1000, pytz.UTC) for x in t_stat]
t_stat = uc.adjust_from_gmt(t_stat, self.tzstringvar.get(), self.daylightSavings.get())
t_stat = [mdates.date2num(x) for x in t_stat]
self.plot_stats(t, d, t_stat, d_stat, label, datum)
plt.show()
