def zip_one_file(dir, to_pack, zip_name):
verify_path_exists(dir)
# for the benefit of pigz, we have to cd to the directory, because
# we don't control the name of the file inside created zip file - it's
# the same as path of the file we're compressing
curr_dir = os.getcwd()
os.chdir(dir)
verify_path_exists(to_pack)
util.delete_file(zip_name) # ensure destination doesn't exist
try:
# -11 for zopfil compression
# --keep to not delete the source file
# --zip to create a single-file zip archive
# we can't control the name of the file pigz will create, so rename
# to desired name after it's created
pigz_dst = to_pack + ".zip"
util.delete_file(pigz_dst)
run_cmd_throw("pigz", "-11", "--keep", "--zip", to_pack)
print("Compressed using pigz.exe")
if pigz_dst != zip_name:
print("moving %s => %s" % (pigz_dst, zip_name))
shutil.move(pigz_dst, zip_name)
except:
# if pigz.exe is not in path, use regular zip compression
zip_file(zip_name, to_pack, to_pack, compress=True)
print("Compressed using regular zip")
verify_path_exists(zip_name)
os.chdir(curr_dir)
def zip_one_file(dir, to_pack, zip_name):
verify_path_exists(dir)
# for the benefit of pigz, we have to cd to the directory, because
# we don't control the name of the file inside created zip file - it's
# the same as path of the file we're compressing
curr_dir = os.getcwd()
os.chdir(dir)
verify_path_exists(to_pack)
util.delete_file(zip_name) # ensure destination doesn't exist
try:
# -11 for zopfil compression
# --keep to not delete the source file
# --zip to create a single-file zip archive
# we can't control the name of the file pigz will create, so rename
# to desired name after it's created
pigz_dst = to_pack + ".zip"
util.delete_file(pigz_dst)
run_cmd_throw("pigz", "-11", "--keep", "--zip", to_pack)
print("Compressed using pigz.exe")
if pigz_dst != zip_name:
print("moving %s => %s" % (pigz_dst, zip_name))
shutil.move(pigz_dst, zip_name)
except:
# if pigz.exe is not in path, use regular zip compression
zip_file(zip_name, to_pack, to_pack, compress=True)
print("Compressed using regular zip")
verify_path_exists(zip_name)
os.chdir(curr_dir)
def create_pdb_zip_archive(dir, archive_name):
archive_path = os.path.join(dir, archive_name)
files = ["libmupdf.pdb", "Installer.pdb",
"SumatraPDF-no-MuPDF.pdb", "SumatraPDF.pdb"]
for file_name in files:
file_path = os.path.join(dir, file_name)
zip_file(archive_path, file_path, file_name, compress=True, append=True)
print("Created zip archive: %s" % archive_path)
return archive_path
def create_pdb_zip_archive(dir, archive_name):
archive_path = os.path.join(dir, archive_name)
files = ["libmupdf.pdb", "Installer.pdb",
"SumatraPDF-no-MuPDF.pdb", "SumatraPDF.pdb"]
for file_name in files:
file_path = os.path.join(dir, file_name)
zip_file(archive_path, file_path, file_name, compress=True, append=True)
print("Created zip archive: %s" % archive_path)
return archive_path
def download(account_input, password_input, courseList_input):
account = account_input
password = password_input
course = courseList_input
if not login(account, password):
print("Login Failed")
return ""
else:
path = os.path.join(data_path, course)
if os.path.exists(path):
return path + ".zip"
dict[course] = {}
download_lecture_notes(course)
util.zip_file(data_path, course)
zip_filename = course + ".zip"
util.write_dict_to_json(data_path, dict, courseList_input)
path = os.path.join(data_path, zip_filename)
return {"link:": path}
def deal_log(log_file):
# log_file : upload/20180716/SUPPTOOL_LOG_20180507181756897.7z
log_path = unzip_file(log_file)
tester = template_tester()
tester.log2html(log_path)
tester.test(log_path)
# report_file : ./report/20180717/SUPPTOOL_LOG_20180509003843892/* # ./.../* 的格式是为了保证压缩时只压缩文件，不压缩目录
report_files = './report/' + log_file.split('/')[-2] + '/' + os.path.splitext(os.path.basename(log_file))[0] + '/*'
# download_file : download/20180717/SUPPTOOL_LOG_20180509003843892.7z
download_file = zip_file(report_files)
FileSimpleModel.objects.filter(file_field=log_file).update(report_download=download_file)
# 清理 upload/MMDD 下的 7z 文件以及解压的目录。MMDD会保留，暂时不管它
os.remove(log_file)
shutil.rmtree(log_file.split('.')[0])
def main():
global upload
if len(args) != 0:
usage()
verify_started_in_right_directory()
if build_prerelease:
if svn_revision is None:
run_cmd_throw("svn", "update")
(out, err) = run_cmd_throw("svn", "info")
ver = str(parse_svninfo_out(out))
else:
# allow to pass in an SVN revision, in case SVN itself isn't available
ver = svn_revision
else:
ver = extract_sumatra_version(os.path.join("src", "Version.h"))
log("Version: '%s'" % ver)
filename_base = "SumatraPDF-%s" % ver
if build_prerelease:
filename_base = "SumatraPDF-prerelease-%s" % ver
s3_dir = "sumatrapdf/rel"
if build_prerelease:
s3_dir = "sumatrapdf/prerel"
if upload_tmp:
upload = True
s3_dir += "tmp"
if upload:
log("Will upload to s3 at %s" % s3_dir)
s3_prefix = "%s/%s" % (s3_dir, filename_base)
s3_exe = s3_prefix + ".exe"
s3_installer = s3_prefix + "-install.exe"
s3_pdb_zip = s3_prefix + ".pdb.zip"
s3_exe_zip = s3_prefix + ".zip"
s3_files = [s3_exe, s3_installer, s3_pdb_zip]
if not build_prerelease:
s3_files.append(s3_exe_zip)
cert_pwd = None
cert_path = os.path.join("scripts", "cert.pfx")
if upload:
map(ensure_s3_doesnt_exist, s3_files)
if not os.path.exists(os.path.join("scripts", "cert.pfx")):
print("scripts/cert.pfx missing")
sys.exit(1)
import awscreds
cert_pwd = awscreds.certpwd
obj_dir = "obj-rel"
if target_platform == "X64":
obj_dir += "64"
if not testing and not build_test_installer and not build_rel_installer:
shutil.rmtree(obj_dir, ignore_errors=True)
shutil.rmtree(os.path.join("mupdf", "generated"), ignore_errors=True)
config = "CFG=rel"
if build_test_installer and not build_prerelease:
obj_dir = "obj-dbg"
config = "CFG=dbg"
extcflags = ""
if build_prerelease:
extcflags = "EXTCFLAGS=-DSVN_PRE_RELEASE_VER=%s" % ver
platform = "PLATFORM=%s" % (target_platform or "X86")
run_cmd_throw("nmake", "-f", "makefile.msvc", config, extcflags, platform, "all_sumatrapdf")
exe = os.path.join(obj_dir, "SumatraPDF.exe")
if upload:
sign(exe, cert_pwd)
sign(os.path.join(obj_dir, "uninstall.exe"), cert_pwd)
build_installer_data(obj_dir)
run_cmd_throw("nmake", "-f", "makefile.msvc", "Installer", config, platform, extcflags)
if build_test_installer or build_rel_installer:
sys.exit(0)
installer = os.path.join(obj_dir, "Installer.exe")
if upload:
sign(installer, cert_pwd)
pdb_zip = os.path.join(obj_dir, "%s.pdb.zip" % filename_base)
zip_file(pdb_zip, os.path.join(obj_dir, "libmupdf.pdb"))
zip_file(pdb_zip, os.path.join(obj_dir, "Installer.pdb"), append=True)
zip_file(pdb_zip, os.path.join(obj_dir, "SumatraPDF-no-MuPDF.pdb"), append=True)
zip_file(pdb_zip, os.path.join(obj_dir, "SumatraPDF.pdb"), append=True)
builds_dir = os.path.join("builds", ver)
if os.path.exists(builds_dir):
shutil.rmtree(builds_dir)
os.makedirs(builds_dir)
copy_to_dst_dir(exe, builds_dir)
copy_to_dst_dir(installer, builds_dir)
copy_to_dst_dir(pdb_zip, builds_dir)
if not build_prerelease:
exe_zip = os.path.join(obj_dir, "%s.zip" % filename_base)
zip_file(exe_zip, exe, "SumatraPDF.exe", compress=True)
ensure_path_exists(exe_zip)
copy_to_dst_dir(exe_zip, builds_dir)
if not upload: return
if build_prerelease:
jstxt = 'var sumLatestVer = %s;\n' % ver
jstxt += 'var sumBuiltOn = "%s";\n' % time.strftime("%Y-%m-%d")
jstxt += 'var sumLatestName = "%s";\n' % s3_exe.split("/")[-1]
jstxt += 'var sumLatestExe = "http://kjkpub.s3.amazonaws.com/%s";\n' % s3_exe
jstxt += 'var sumLatestPdb = "http://kjkpub.s3.amazonaws.com/%s";\n' % s3_pdb_zip
jstxt += 'var sumLatestInstaller = "http://kjkpub.s3.amazonaws.com/%s";\n' % s3_installer
s3UploadFilePublic(installer, s3_installer)
s3UploadFilePublic(pdb_zip, s3_pdb_zip)
s3UploadFilePublic(exe, s3_exe)
if build_prerelease:
s3UploadDataPublic(jstxt, "sumatrapdf/sumatralatest.js")
txt = "%s\n" % ver
s3UploadDataPublic(txt, "sumatrapdf/sumpdf-prerelease-latest.txt")
deleteOldPreReleaseBuilds()
else:
s3UploadFilePublic(exe_zip, s3_exe_zip)
def main():
global upload
if len(args) != 0:
usage()
verify_started_in_right_directory()
if build_prerelease:
if svn_revision is None:
run_cmd_throw("svn", "update")
(out, err) = run_cmd_throw("svn", "info")
ver = str(parse_svninfo_out(out))
else:
# allow to pass in an SVN revision, in case SVN itself isn't available
ver = svn_revision
else:
ver = extract_sumatra_version(os.path.join("src", "Version.h"))
log("Version: '%s'" % ver)
# don't update translations for release versions to prevent Trunk changes
# from messing up the compilation of a point release on a branch
if g_new_translation_system and build_prerelease and not skip_transl_update:
trans_upload.uploadStringsIfChanged()
changed = trans_download.downloadAndUpdateTranslationsIfChanged()
# Note: this is not a perfect check since re-running the script will
# proceed
if changed:
print("\nNew translations have been downloaded from apptranslator.og")
print("Please verify and checkin src/Translations_txt.cpp and strings/translations.txt")
sys.exit(1)
filename_base = "SumatraPDF-%s" % ver
if build_prerelease:
filename_base = "SumatraPDF-prerelease-%s" % ver
s3_dir = "sumatrapdf/rel"
if build_prerelease:
s3_dir = "sumatrapdf/prerel"
if upload_tmp:
upload = True
s3_dir += "tmp"
if upload:
log("Will upload to s3 at %s" % s3_dir)
conf = load_config()
s3.set_secrets(conf.aws_access, conf.aws_secret)
s3.set_bucket("kjkpub")
s3_prefix = "%s/%s" % (s3_dir, filename_base)
s3_exe = s3_prefix + ".exe"
s3_installer = s3_prefix + "-install.exe"
s3_pdb_zip = s3_prefix + ".pdb.zip"
s3_exe_zip = s3_prefix + ".zip"
s3_files = [s3_exe, s3_installer, s3_pdb_zip]
if not build_prerelease:
s3_files.append(s3_exe_zip)
cert_pwd = None
cert_path = os.path.join("scripts", "cert.pfx")
if upload:
map(s3.verify_doesnt_exist, s3_files)
verify_path_exists(cert_path)
conf = load_config()
cert_pwd = conf.GetCertPwdMustExist()
obj_dir = "obj-rel"
if target_platform == "X64":
obj_dir += "64"
if not testing and not build_test_installer and not build_rel_installer:
shutil.rmtree(obj_dir, ignore_errors=True)
shutil.rmtree(os.path.join("mupdf", "generated"), ignore_errors=True)
config = "CFG=rel"
if build_test_installer and not build_prerelease:
obj_dir = "obj-dbg"
config = "CFG=dbg"
extcflags = ""
if build_prerelease:
extcflags = "EXTCFLAGS=-DSVN_PRE_RELEASE_VER=%s" % ver
platform = "PLATFORM=%s" % (target_platform or "X86")
run_cmd_throw("nmake", "-f", "makefile.msvc", config, extcflags, platform, "all_sumatrapdf")
exe = os.path.join(obj_dir, "SumatraPDF.exe")
if upload:
sign(exe, cert_pwd)
sign(os.path.join(obj_dir, "uninstall.exe"), cert_pwd)
build_installer_data(obj_dir)
run_cmd_throw("nmake", "-f", "makefile.msvc", "Installer", config, platform, extcflags)
if build_test_installer or build_rel_installer:
sys.exit(0)
installer = os.path.join(obj_dir, "Installer.exe")
if upload:
sign(installer, cert_pwd)
pdb_zip = os.path.join(obj_dir, "%s.pdb.zip" % filename_base)
zip_file(pdb_zip, os.path.join(obj_dir, "libmupdf.pdb"))
zip_file(pdb_zip, os.path.join(obj_dir, "Installer.pdb"), append=True)
zip_file(pdb_zip, os.path.join(obj_dir, "SumatraPDF-no-MuPDF.pdb"), append=True)
zip_file(pdb_zip, os.path.join(obj_dir, "SumatraPDF.pdb"), append=True)
builds_dir = os.path.join("builds", ver)
if os.path.exists(builds_dir):
shutil.rmtree(builds_dir)
os.makedirs(builds_dir)
copy_to_dst_dir(exe, builds_dir)
copy_to_dst_dir(installer, builds_dir)
copy_to_dst_dir(pdb_zip, builds_dir)
if not build_prerelease:
exe_zip = os.path.join(obj_dir, "%s.zip" % filename_base)
zip_file(exe_zip, exe, "SumatraPDF.exe", compress=True)
verify_path_exists(exe_zip)
copy_to_dst_dir(exe_zip, builds_dir)
if not upload: return
if build_prerelease:
jstxt = 'var sumLatestVer = %s;\n' % ver
jstxt += 'var sumBuiltOn = "%s";\n' % time.strftime("%Y-%m-%d")
jstxt += 'var sumLatestName = "%s";\n' % s3_exe.split("/")[-1]
jstxt += 'var sumLatestExe = "http://kjkpub.s3.amazonaws.com/%s";\n' % s3_exe
jstxt += 'var sumLatestPdb = "http://kjkpub.s3.amazonaws.com/%s";\n' % s3_pdb_zip
jstxt += 'var sumLatestInstaller = "http://kjkpub.s3.amazonaws.com/%s";\n' % s3_installer
s3.upload_file_public(installer, s3_installer)
s3.upload_file_public(pdb_zip, s3_pdb_zip)
s3.upload_file_public(exe, s3_exe)
if build_prerelease:
s3.upload_data_public(jstxt, "sumatrapdf/sumatralatest.js")
txt = "%s\n" % ver
s3.upload_data_public(txt, "sumatrapdf/sumpdf-prerelease-latest.txt")
deleteOldPreReleaseBuilds()
else:
s3.upload_file_public(exe_zip, s3_exe_zip)
def main():
global upload
if len(args) != 0:
usage()
verify_started_in_right_directory()
if build_prerelease:
if svn_revision is None:
run_cmd_throw("svn", "update")
(out, err) = run_cmd_throw("svn", "info")
ver = str(parse_svninfo_out(out))
else:
# allow to pass in an SVN revision, in case SVN itself isn't available
ver = svn_revision
else:
ver = extract_sumatra_version(os.path.join("src", "Version.h"))
log("Version: '%s'" % ver)
filename_base = "SumatraPDF-%s" % ver
if build_prerelease:
filename_base = "SumatraPDF-prerelease-%s" % ver
s3_dir = "sumatrapdf/rel"
if build_prerelease:
s3_dir = "sumatrapdf/prerel"
if upload_tmp:
upload = True
s3_dir += "tmp"
if upload:
log("Will upload to s3 at %s" % s3_dir)
s3_prefix = "%s/%s" % (s3_dir, filename_base)
s3_exe = s3_prefix + ".exe"
s3_installer = s3_prefix + "-install.exe"
s3_pdb_zip = s3_prefix + ".pdb.zip"
s3_exe_zip = s3_prefix + ".zip"
s3_files = [s3_exe, s3_installer, s3_pdb_zip]
if not build_prerelease:
s3_files.append(s3_exe_zip)
cert_pwd = None
cert_path = os.path.join("scripts", "cert.pfx")
if upload:
map(ensure_s3_doesnt_exist, s3_files)
if not os.path.exists(os.path.join("scripts", "cert.pfx")):
print("scripts/cert.pfx missing")
sys.exit(1)
import awscreds
cert_pwd = awscreds.certpwd
obj_dir = "obj-rel"
if target_platform == "X64":
obj_dir += "64"
if not testing and not build_test_installer and not build_rel_installer:
shutil.rmtree(obj_dir, ignore_errors=True)
config = "CFG=rel"
if build_test_installer and not build_prerelease:
obj_dir = "obj-dbg"
config = "CFG=dbg"
extcflags = ""
if build_prerelease:
extcflags = "EXTCFLAGS=-DSVN_PRE_RELEASE_VER=%s" % ver
platform = "PLATFORM=%s" % (target_platform or "X86")
run_cmd_throw("nmake", "-f", "makefile.msvc", config, extcflags, platform,
"all_sumatrapdf")
exe = os.path.join(obj_dir, "SumatraPDF.exe")
if upload:
sign(exe, cert_pwd)
sign(os.path.join(obj_dir, "uninstall.exe"), cert_pwd)
build_installer_data(obj_dir)
run_cmd_throw("nmake", "-f", "makefile.msvc", "Installer", config,
platform, extcflags)
if build_test_installer or build_rel_installer:
sys.exit(0)
installer = os.path.join(obj_dir, "Installer.exe")
if upload:
sign(installer, cert_pwd)
pdb_zip = os.path.join(obj_dir, "%s.pdb.zip" % filename_base)
zip_file(pdb_zip, os.path.join(obj_dir, "libmupdf.pdb"))
zip_file(pdb_zip, os.path.join(obj_dir, "Installer.pdb"), append=True)
zip_file(pdb_zip,
os.path.join(obj_dir, "SumatraPDF-no-MuPDF.pdb"),
append=True)
zip_file(pdb_zip, os.path.join(obj_dir, "SumatraPDF.pdb"), append=True)
builds_dir = os.path.join("builds", ver)
if os.path.exists(builds_dir):
shutil.rmtree(builds_dir)
os.makedirs(builds_dir)
copy_to_dst_dir(exe, builds_dir)
copy_to_dst_dir(installer, builds_dir)
copy_to_dst_dir(pdb_zip, builds_dir)
if not build_prerelease:
exe_zip = os.path.join(obj_dir, "%s.zip" % filename_base)
zip_file(exe_zip, exe, "SumatraPDF.exe", compress=True)
ensure_path_exists(exe_zip)
copy_to_dst_dir(exe_zip, builds_dir)
if not upload: return
if build_prerelease:
jstxt = 'var sumLatestVer = %s;\n' % ver
jstxt += 'var sumBuiltOn = "%s";\n' % time.strftime("%Y-%m-%d")
jstxt += 'var sumLatestName = "%s";\n' % s3_exe.split("/")[-1]
jstxt += 'var sumLatestExe = "http://kjkpub.s3.amazonaws.com/%s";\n' % s3_exe
jstxt += 'var sumLatestPdb = "http://kjkpub.s3.amazonaws.com/%s";\n' % s3_pdb_zip
jstxt += 'var sumLatestInstaller = "http://kjkpub.s3.amazonaws.com/%s";\n' % s3_installer
s3UploadFilePublic(installer, s3_installer)
s3UploadFilePublic(pdb_zip, s3_pdb_zip)
s3UploadFilePublic(exe, s3_exe)
if build_prerelease:
s3UploadDataPublic(jstxt, "sumatrapdf/sumatralatest.js")
txt = "%s\n" % ver
s3UploadDataPublic(txt, "sumatrapdf/sumpdf-prerelease-latest.txt")
deleteOldPreReleaseBuilds()
else:
s3UploadFilePublic(exe_zip, s3_exe_zip)