if path.exists(pid) :
po = pid.replace(pt,pc)
createDirectories(po)
copyFiles(pid,po)
print ' +> '+pid
pid = path.join(pt,'config')
if path.exists(pid):
po = pid.replace(pt,pc)
createDirectories(po)
copyFile(options.configFile,po)
print '... finally copying ' + options.configFile
print '\n... now packaging ' + cfgname
zip(cfgname,pc,cfg['ZIPPER'])
print '\n... now cleaning '
removeDirectories(pc)
if options.archiveName != '':
print '\n... now packaging ' + cfgname + ' into ' + archive
zip(path.basename(archive),archive,cfg['ZIPPER']) # /!\ use the last cfg value
print '\n... now cleaning ' + archive
removeDirectories(archive)
# <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
# ~~~~ Jenkins' success message ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
print '\n\nMy work is done\n\n'
sys.exit()
def runCAS(cfgName,cfg,codeName,casFile,options):
# ~~~~ Read the DICO File ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dicoFile = path.join(path.join(cfg['MODULES'][codeName]['path'],'lib'),codeName+cfg['TELVER']+'.dico')
frgb,dico = scanDICO(dicoFile)
iFS,oFS = getIOFilesSubmit(frgb,dico)
# ~~ Read the principal CAS File ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
if not path.exists(casFile):
print '... inexistent CAS file: ',casFile
return None # /!\ should you stop or carry on ?
cas,lang = processCAS(casFile,frgb)
if not checkConsistency(cas,dico,frgb,cfg):
print '... inconsistent CAS file: ',casFile
print ' +> you may be using an inappropriate configuration:',cfgName
print ' +> or may be wishing for scalar mode while using parallel'
return None # /!\ should you stop or carry on ?
# ~~ Handling Directories ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CASDir = path.dirname(casFile)
TMPDir = processTMP(casFile)
# ~~ Read the included CAS File ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cplages,defaut = getKeyWord('COUPLING WITH',cas,dico,frgb)
#/!\ having done the loop this way it will not check for DELWAQ
COUPLAGE = {}
for cplage in cplages:
for mod in cfg['MODULES'].keys():
if mod in cplage.lower():
# ~~~~ Extract the CAS File name ~~~~~~~~~~~~~~~~~~~~~~~
casFilePlage,defaut = getKeyWord(mod.upper()+' STEERING FILE',cas,dico,frgb)
if casFilePlage == []: casFilePlage = defaut
casFilePlage = path.join(CASDir,casFilePlage[0])
if not path.isfile(casFilePlage):
print '... missing coupling CAS file for',mod,': ',casFilePlage
return None # /!\ should you stop or carry on ?
# ~~~~ Read the DICO File ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dicoFilePlage = path.join(path.join(cfg['MODULES'][mod]['path'],'lib'),mod+cfg['TELVER']+'.dico')
frgbPlage,dicoPlage = scanDICO(dicoFilePlage)
iFSPlage,oFSPlage = getIOFilesSubmit(frgbPlage,dicoPlage)
# ~~ Read the coupled CAS File ~~~~~~~~~~~~~~~~~~~~~~~~~
casPlage,lang = processCAS(casFilePlage,frgbPlage)
if not checkConsistency(casPlage,dicoPlage,frgbPlage,cfg):
print '... inconsistent CAS file: ',casFilePlage
return None # /!\ should you stop or carry on ?
COUPLAGE.update({mod:{}})
COUPLAGE[mod].update({'cas':casPlage,'frgb':frgbPlage,'iFS':iFSPlage,'oFS':oFSPlage,'dico':dicoPlage})
# ~~ Handling sortie file ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sortiefile = None
if options.sortieFile:
# define the filename (basename) of the sortie file
sortiefile = path.basename(TMPDir)+'.sortie'
# ~~ Handling all input files ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# >>> Placing yourself where the CAS File is
chdir(CASDir)
# >>> Copy INPUT files into TMPDir
if not processLIT(cas,iFS,TMPDir): sys.exit()
for mod in COUPLAGE.keys():
if not processLIT(COUPLAGE[mod]['cas'],COUPLAGE[mod]['iFS'],TMPDir): sys.exit()
# >>> Placing yourself into the TMPDir
chdir(TMPDir)
# >>> Creating LNG file
processCONFIG(lang)
# ~~ Handling Executable ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# >>> Names for the executable set
#> names within TMPDir
f90File = iFS['FICHIER FORTRAN'].split(';')[1]
#> aggregation of PRINCI files
for mod in COUPLAGE.keys():
f90FilePlage = COUPLAGE[mod]['iFS']['FICHIER FORTRAN'].split(';')[1]
if path.isfile(f90FilePlage):
putFileContent(f90File,getFileContent(f90File)+['']+getFileContent(f90FilePlage))
remove(f90FilePlage)
objFile = path.splitext(f90File)[0] + cfg['SYSTEM']['SFX_OBJ']
#> default executable name
exeFile = path.join(path.join(cfg['MODULES'][codeName]['path'],cfgName),codeName+cfg['TELVER']+cfg['SYSTEM']['SFX_EXE'])
#> user defined executable name
useFile = exeFile
value,defaut = getKeyWord('FICHIER FORTRAN',cas,dico,frgb)
if value != []:
useFile = path.join(CASDir,path.splitext(value[0])[0]+cfg['SYSTEM']['SFX_EXE'])
if path.exists(useFile) and cfg['REBUILD'] > 0: remove(useFile)
#> default command line compilation and linkage
if not path.exists(path.join(path.join(cfg['MODULES'][codeName]['path'],cfgName),codeName+cfg['TELVER']+'.cmdo')):
print '\nNot able to find your OBJECT command line: ' + path.join(cfgName,codeName+cfg['TELVER']+'.cmdo') + '\n'
print ' ... you have to compile this module at least: '
print ' +> ',codeName
sys.exit()
objCmd = getFileContent(path.join(path.join(cfg['MODULES'][codeName]['path'],cfgName),codeName+cfg['TELVER']+'.cmdo'))[0]
if not path.exists(path.join(path.join(cfg['MODULES'][codeName]['path'],cfgName),codeName+cfg['TELVER']+'.cmdx')):
print '\nNot able to find your OBJECT command line: ' + path.join(cfgName,codeName+cfg['TELVER']+'.cmdx') + '\n'
print ' ... you have to compile this module at least: '
print ' +> ',codeName
sys.exit()
exeCmd = getFileContent(path.join(path.join(cfg['MODULES'][codeName]['path'],cfgName),codeName+cfg['TELVER']+'.cmdx'))[0]
# >>> Compiling the executable if required
if not processExecutable(useFile,objFile,f90File,objCmd,exeCmd,CASDir): sys.exit()
# >>> Rename executable because of firewall issues ~~~~~~~~~~~~~~
runCmd = path.join(TMPDir,'out_'+path.basename(useFile))
shutil.move(path.basename(useFile),runCmd)
if not options.compileonly:
# ~~ Handling the parallelisation ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ncsize = getNCSIZE(cas,dico,frgb)
if ncsize > 1:
# >>> MPI configuration
# ~~> Executable /!\ you need one if ncsize > 1
mpiCmd = ''
if cfg.has_key('MPI'):
if cfg['MPI'].has_key('EXEC'):
mpiCmd = cfg['MPI']['EXEC']
if mpiCmd == '':
print '... I do not know how to run MPI, can you help ?'
return None # /!\ should you stop or carry on ?
# ~~> Assign the mpi_telemac.conf
hosts = ''
if cfg.has_key('MPI'):
if cfg['MPI'].has_key('HOSTS'):
hosts = cfg['MPI']['HOSTS']
# ~~> MPI Command line
mpiCmd = mpiCmd.replace('<wdir>','-wdir '+TMPDir) # /!\ Make sure TMPDir works in UNC convention
mpiCmd = mpiCmd.replace('<ncsize>','-n '+str(ncsize))
mpiCmd = mpiCmd.replace('<hosts>',hosts)
mpiCmd = mpiCmd.replace('<exename>',runCmd)
runCmd = mpiCmd
# >>> Parallel tools
# ~~> Default path
PARDir = path.join(cfg['MODULES']['parallel']['path'],cfgName)
# ~~> User path
if cfg.has_key('PARALLEL'):
if cfg['PARALLEL'].has_key('PATH'):
PARDir = cfg['PARALLEL']['PATH'].replace('<root>',cfg['TELDIR']).replace('<config>',path.join(cfg['MODULES']['parallel']['path'],cfgName))
# ~~> Creating PARA file and the mpi_telemac.conf
processPARALLEL(ncsize,TMPDir+sep) # /!\ Make sure TMPDir works in UNC convention
# >>> Running the partionning
if ncsize > 1:
# ~~> PARTEL Executable
exeCmd = path.join(PARDir,'partel'+cfg['SYSTEM']['SFX_EXE'])
# ~~> Run PARTEL
CONLIM = getCONLIM(cas,iFS) # no check on existence
runPartition(exeCmd,cas,CONLIM,iFS,ncsize)
for mod in COUPLAGE.keys():
CONLIM = getCONLIM(COUPLAGE[mod]['cas'],COUPLAGE[mod]['iFS'])
runPartition(exeCmd,COUPLAGE[mod]['cas'],CONLIM,COUPLAGE[mod]['iFS'],ncsize)
# >>> Running the Executable ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
print runCmd
if not runCode(runCmd,sortiefile): sys.exit()
# >>> Handling the recollection ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
if ncsize > 1:
# ~~> GRETEL Executable
exeCmd = path.join(PARDir,'gretel_autop'+cfg['SYSTEM']['SFX_EXE'])
# ~~> Run GRETEL
GLOGEO = getGLOGEO(cas,iFS) # no check on existence
runRecollection(exeCmd,cas,GLOGEO,oFS,ncsize)
for mod in COUPLAGE.keys():
GLOGEO = getGLOGEO(COUPLAGE[mod]['cas'],COUPLAGE[mod]['iFS'])
runRecollection(exeCmd,COUPLAGE[mod]['cas'],GLOGEO,COUPLAGE[mod]['oFS'],ncsize)
# ~~ Handling all output files ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
if not processECR(cas,oFS,CASDir,TMPDir,sortiefile,ncsize): sys.exit()
for mod in COUPLAGE.keys():
if not processECR(COUPLAGE[mod]['cas'],COUPLAGE[mod]['oFS'],CASDir,TMPDir,'',ncsize): sys.exit()
# ~~ Handling Directories ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
chdir(CASDir)
if options.tmpdirectory or options.compileonly: removeDirectories(TMPDir)
return sortiefile
