def activate(self, device):
self.log.info('activating')
try:
# first we verify that we got parent reference and proxy info
assert device.parent_id, 'Invalid Parent ID'
assert device.proxy_address.device_id, 'Invalid Device ID'
# register for proxied messages right away
self.proxy_address = device.proxy_address
self.adapter_agent.register_for_proxied_messages(device.proxy_address)
# initialize device info
device.root = False
device.vendor = 'Adtran Inc.'
device.model = 'n/a'
device.hardware_version = 'n/a'
device.firmware_version = 'n/a'
device.reason = ''
device.connect_status = ConnectStatus.UNKNOWN
# Register physical ports. Should have at least one of each
self.adapter_agent.add_port(device.id, self._pon.get_port())
def xpon_not_found():
self.enabled = True
# Schedule xPON 'not found' startup for 10 seconds from now. We will
# easily get a vONT-ANI create within that time if xPON is being used
# as this is how we are initially launched and activated in the first
# place if xPON is in use.
reactor.callLater(10, xpon_not_found) # TODO: Clean up old xPON delay
# reference of uni_port is required when re-enabling the device if
# it was disabled previously
# Need to query ONU for number of supported uni ports
# For now, temporarily set number of ports to 1 - port #2
parent_device = self.adapter_agent.get_device(device.parent_id)
self.logical_device_id = parent_device.parent_id
self.adapter_agent.update_device(device)
############################################################################
# Setup PM configuration for this device
# Pass in ONU specific options
kwargs = {
OnuPmMetrics.DEFAULT_FREQUENCY_KEY: OnuPmMetrics.DEFAULT_ONU_COLLECTION_FREQUENCY,
'heartbeat': self.heartbeat,
OnuOmciPmMetrics.OMCI_DEV_KEY: self.openomci.onu_omci_device
}
self.pm_metrics = OnuPmMetrics(self.adapter_agent, self.device_id,
self.logical_device_id, grouped=True,
freq_override=False, **kwargs)
pm_config = self.pm_metrics.make_proto()
self.openomci.set_pm_config(self.pm_metrics.omci_pm.openomci_interval_pm)
self.log.info("initial-pm-config", pm_config=pm_config)
self.adapter_agent.update_device_pm_config(pm_config, init=True)
############################################################################
# Setup Alarm handler
self.alarms = AdapterAlarms(self.adapter_agent, device.id, self.logical_device_id)
self.openomci.onu_omci_device.alarm_synchronizer.set_alarm_params(mgr=self.alarms,
ani_ports=[self._pon])
############################################################################
# Start collecting stats from the device after a brief pause
reactor.callLater(30, self.pm_metrics.start_collector)
except Exception as e:
self.log.exception('activate-failure', e=e)
device.reason = 'Failed to activate: {}'.format(e.message)
device.connect_status = ConnectStatus.UNREACHABLE
device.oper_status = OperStatus.FAILED
self.adapter_agent.update_device(device)
def activate(self, device):
self.log.debug('function-entry', device=device)
# first we verify that we got parent reference and proxy info
assert device.parent_id
assert device.proxy_address.device_id
# register for proxied messages right away
self.proxy_address = device.proxy_address
self.adapter_agent.register_for_proxied_messages(device.proxy_address)
self.parent_id = device.parent_id
parent_device = self.adapter_agent.get_device(self.parent_id)
if parent_device.type == 'openolt':
self.parent_adapter = registry('adapter_loader'). \
get_agent(parent_device.adapter).adapter
if self.enabled is not True:
self.log.info('activating-new-onu')
# populate what we know. rest comes later after mib sync
device.root = True
device.vendor = 'Broadcom'
device.connect_status = ConnectStatus.REACHABLE
device.oper_status = OperStatus.DISCOVERED
device.reason = 'activating-onu'
# pm_metrics requires a logical device id
parent_device = self.adapter_agent.get_device(device.parent_id)
self.logical_device_id = parent_device.parent_id
assert self.logical_device_id, 'Invalid logical device ID'
self.adapter_agent.update_device(device)
self.log.debug('set-device-discovered')
self._init_pon_state(device)
############################################################################
# Setup PM configuration for this device
# Pass in ONU specific options
kwargs = {
OnuPmMetrics.DEFAULT_FREQUENCY_KEY:
OnuPmMetrics.DEFAULT_ONU_COLLECTION_FREQUENCY,
'heartbeat': self.heartbeat,
OnuOmciPmMetrics.OMCI_DEV_KEY: self._onu_omci_device
}
self.pm_metrics = OnuPmMetrics(self.adapter_agent,
self.device_id,
self.logical_device_id,
grouped=True,
freq_override=False,
**kwargs)
pm_config = self.pm_metrics.make_proto()
self._onu_omci_device.set_pm_config(
self.pm_metrics.omci_pm.openomci_interval_pm)
self.log.info("initial-pm-config", pm_config=pm_config)
self.adapter_agent.update_device_pm_config(pm_config, init=True)
############################################################################
# Setup Alarm handler
self.alarms = AdapterAlarms(self.adapter_agent, device.id,
self.logical_device_id)
# Note, ONU ID and UNI intf set in add_uni_port method
self._onu_omci_device.alarm_synchronizer.set_alarm_params(
mgr=self.alarms, ani_ports=[self._pon])
self.enabled = True
else:
self.log.info('onu-already-activated')
def activate(self, device):
self.log.info('activating')
try:
# first we verify that we got parent reference and proxy info
assert device.parent_id, 'Invalid Parent ID'
assert device.proxy_address.device_id, 'Invalid Device ID'
if device.vlan:
# vlan non-zero if created via legacy method (not xPON).
self._olt_created = True
# register for proxied messages right away
self.proxy_address = device.proxy_address
self.adapter_agent.register_for_proxied_messages(
device.proxy_address)
# initialize device info
device.root = True
device.vendor = 'Adtran Inc.'
device.model = 'n/a'
device.hardware_version = 'n/a'
device.firmware_version = 'n/a'
device.reason = ''
device.connect_status = ConnectStatus.UNKNOWN
# Register physical ports. Should have at least one of each
self._pon = PonPort.create(self, self._next_port_number)
self.adapter_agent.add_port(device.id, self._pon.get_port())
if self._olt_created:
# vlan non-zero if created via legacy method (not xPON). Also
# Set a random serial number since not xPON based
uni_port = UniPort.create(self, self._next_port_number,
device.vlan, 'deprecated',
device.vlan, None)
self._unis[uni_port.port_number] = uni_port
self.adapter_agent.add_port(device.id, uni_port.get_port())
device.serial_number = uuid4().hex
uni_port.add_logical_port(device.vlan,
subscriber_vlan=device.vlan)
# Start things up for this ONU Handler.
self.enabled = True
# reference of uni_port is required when re-enabling the device if
# it was disabled previously
# Need to query ONU for number of supported uni ports
# For now, temporarily set number of ports to 1 - port #2
parent_device = self.adapter_agent.get_device(device.parent_id)
self.logical_device_id = parent_device.parent_id
assert self.logical_device_id, 'Invalid logical device ID'
self.adapter_agent.update_device(device)
############################################################################
# Setup PM configuration for this device
# Pass in ONU specific options
kwargs = {
OnuPmMetrics.DEFAULT_FREQUENCY_KEY:
OnuPmMetrics.DEFAULT_ONU_COLLECTION_FREQUENCY,
'heartbeat': self.heartbeat,
OnuOmciPmMetrics.OMCI_DEV_KEY: self.openomci.onu_omci_device
}
self.pm_metrics = OnuPmMetrics(self.adapter_agent,
self.device_id,
self.logical_device_id,
grouped=True,
freq_override=False,
**kwargs)
pm_config = self.pm_metrics.make_proto()
self.openomci.set_pm_config(
self.pm_metrics.omci_pm.openomci_interval_pm)
self.log.info("initial-pm-config", pm_config=pm_config)
self.adapter_agent.update_device_pm_config(pm_config, init=True)
############################################################################
# Setup Alarm handler
self.alarms = AdapterAlarms(self.adapter_agent, device.id,
self.logical_device_id)
############################################################################
# Start collecting stats from the device after a brief pause
reactor.callLater(30, self.pm_metrics.start_collector)
except Exception as e:
self.log.exception('activate-failure', e=e)
device.reason = 'Failed to activate: {}'.format(e.message)
device.connect_status = ConnectStatus.UNREACHABLE
device.oper_status = OperStatus.FAILED
self.adapter_agent.update_device(device)