def genWorkflowSystem(self, hosts):
""" Generates a wfsystem object for upgrade which is combination of
workflow and task file, describing which tasks to run on
which servers with status as INITIAL
Arguments:
hosts - Hosts object that contains details of hosts
Returns:
wfsystem - WorkflowSystem object
"""
wfsystem = WorkflowSystem(self.name, self.config)
self._genWorkflowPhase(self.display, wfsystem.display, hosts)
self._genWorkflowPhase(self.precheck, wfsystem.precheck, hosts)
self._genWorkflowPhase(self.execute, wfsystem.execute, hosts)
self._genWorkflowPhase(self.postcheck, wfsystem.postcheck, hosts)
return wfsystem
def dynamicUpdate(self, wf, wfsys, sysfilename, hosts, menuMsgs):
""" updates the master status file
- firstly as a tmp file, then reads in and validates the tmp
file and if ok renames to master status file
Arguments:
wf: the original workflow (for validation)
wfsys: the workflowsys
sysfilename: name of the master status file
hosts: the hosts object
menuMsgs: list to hold messages for display during interaction
Returns:
True if master valid master status file was produced,
False if errors were encountered
"""
# now update the workflow file as tmp file
tmpsysfile = "%s_tmp" % sysfilename
wfsys.write(tmpsysfile)
log.debug("New tmp status file %s written" % tmpsysfile)
# now attempt to reload the tmp file - which will validate against xsd
loadtmp = WorkflowSystem("", self.config)
if not loadtmp.load(tmpsysfile, hosts):
menuMsgs.append("Failed to reload new master status file. " \
"Investigate the problem, then remove invalid " \
"temporary status file %s," \
" and rerun the dynamic alteration" % tmpsysfile)
return False
# now perform equivalency test against original workflow
wfcheck = wf.genWorkflowSystem(hosts)
if not wfcheck.isEquivalent(loadtmp):
menuMsgs.append("New master status file does not match original" \
" workflow. " \
"Investigate the problem, then remove invalid " \
"temporary status file %s," \
" and rerun the dynamic alteration" % tmpsysfile)
return False
# if validated ok then rename the tmp file as the new master status
# file
# write backup file before updating the status file
tstamp = datetime.datetime.now().strftime("%Y%m%d_%H%M%S")
backupdir = "dynamic_alteration_backups"
if '/' in sysfilename:
sysfilesplit = sysfilename.rsplit('/', 1)
basedir = sysfilesplit[0]
basename = sysfilesplit[1]
else:
basedir = "./"
basename = sysfilename
timestampedBackup = "%s/%s/%s.%s" % \
(basedir, backupdir, basename, tstamp)
# retrieve full path of backup dir
backupdir = timestampedBackup.rsplit('/', 1)[0]
if not os.path.exists(backupdir):
log.debug("creating backup directory %s" % backupdir)
os.mkdir(backupdir)
wfsys.write(timestampedBackup)
log.debug("Timestamped backup %s created" % timestampedBackup)
log.debug("Renaming temp status file %s as master status file %s" % \
(tmpsysfile, sysfilename))
try:
os.rename(tmpsysfile, sysfilename)
except:
menuMsgs.append("Error renaming temporary file %s to master "
"status file %s" % (tmpsysfile, sysfilename))
return False
return True
def dynamicAlterations(self, o, hosts, ini):
""" does the processing for a dynamic alterations run
Arguments:
o: the WorkflowOptions object
hosts: hosts object
ini: the ini file params object
Returns:
boolean - True if completed ok
"""
wf = Workflow(self.config)
sysfilename = o.getSysStatusName()
menuMsgs = []
if not wf.parse(o.wfile):
log.info("Error encountered when parsing workflow file")
return False
try:
wfsys = wf.genWorkflowSystem(hosts)
except Exception as err:
log.error("Failed to generate workflow : %s" % str(err))
log.debug("Exception: %s" % (traceback.format_exc()))
return False
dynamicMenu = DynamicMenuMgr(self.term_size, self.config, hosts,
self.dynamicTaskValidator)
while True:
log.debug("Starting loop with menuMsgs length %d" % \
len(menuMsgs))
# Check if already got work file system
if os.path.isfile(sysfilename):
loadsys = WorkflowSystem("", self.config)
loadsys.load(sysfilename, hosts)
if wfsys.isEquivalent(loadsys):
log.debug("Previous run is equivalent to current "
"files - operating on status file")
wfsys = loadsys
else:
log.error("Workflow and/or hosts file has "
"changed since previous run, please investigate")
return False
else:
log.debug("A new master status file will be created")
dyntask = dynamicMenu.getDynamicAlteration(wfsys, menuMsgs)
if dyntask == None:
log.info("Quitting dynamic alterations")
return True
elif dyntask == {}:
log.debug("Dynamic alteration empty")
menuMsgs = []
else:
log.debug("Dynamic task input: %s" % dyntask)
menuMsgs = []
if not self.processDynamicAlteration(
dyntask, wf, wfsys, sysfilename, hosts, menuMsgs):
if len(menuMsgs) == 0:
menuMsgs.append("Unspecified error during " \
"processing %s, dynamic alteration " \
"abandoned, please check logs" % \
dyntask[constants.DYN_ID])
log.debug("Finished processDynamicAlteration with "
"menuMsg %s" % menuMsgs)
def start(self):
# Read in command line options
o = WorkflowOptions()
o.parse()
if o.version:
if os.path.exists(constants.VERSION_FILE):
with open(constants.VERSION_FILE, 'r') as fin:
print fin.read()
else:
print "VERSION information was unavailable"
return True
FORMAT = '%(asctime)-15s %(message)s'
# Find the filename bit of filename
workfile = utils.get_file_less_ext(o.wfile)
hostfile = utils.get_file_less_ext(o.hfile)
starttime = datetime.datetime.now().strftime("%d%m%Y_%H%M%S")
# Check if already running - note that this is protecting us
# from having two processes updating the same
# master status file
if self.alreadyRunning(o.wfile, o.hfile, o.allow_multiple):
if o.allow_multiple:
print "Exiting as instance of wfeng already running " + \
"with same hostfile and workfile"
else:
print "Exiting as instance of wfeng already running"
return False
self.logfilename = "%s/%s_%s_%s.log" %\
(constants.LOG_DIR, workfile, hostfile, starttime)
self.tracefilename = "%s/%s_%s_%s.trc" %\
(constants.LOG_DIR, workfile, hostfile, starttime)
logging.addLevelName(constants.TRACE, "TRACE")
logging.addLevelName(constants.DEBUGNOTIME, "DEBUGNOTIME")
logging.basicConfig(filename=self.tracefilename,
level=constants.TRACE,
format=FORMAT)
console = logging.StreamHandler()
console.setLevel(logging.INFO)
logging.getLogger('wfeng').addHandler(console)
# Add debug handler
debug = logging.FileHandler(self.logfilename)
debug.setLevel(logging.DEBUG)
formatter = WfengFormatter('%(asctime)s %(message)s')
debug.setFormatter(formatter)
logging.getLogger('wfeng').addHandler(debug)
# Create queue for subprocesses
self.logqueue = multiprocessing.Queue()
self.config = WfmgrConfig()
self.config.load()
if not os.path.isfile(o.wfile):
log.error("Workflow file %s does not exist" % o.wfile)
return False
if not os.path.isfile(o.hfile):
log.error("Host file %s does not exist" % o.hfile)
return False
ini = WfengIni()
# Load default
if not ini.load():
return False
if o.inifile is not None:
if not ini.load(o.inifile):
return False
self.config.iniparams = ini.vars
hosts = Hosts()
if not hosts.parse(o.hfile):
return False
# if we are adding/removing dynamic pause/esc then
# process interactively and exit
if o.alter_pause_escape:
try:
dynAltOk = self.dynamicAlterations(o, hosts, ini)
if not dynAltOk:
log.info("Error in dynamic alterations menu interaction")
return False
return True
except KeyboardInterrupt:
log.info("\nUnexpected interrupt (CTRL/C) received - " \
"please check status file is as expected\n")
return False
if o.needMenu():
o.getMenuOptions(self.term_size, self.config)
os.system('clear')
log.info("WORKFLOW ENGINE".center(self.term_size))
log.info("----------------".center(self.term_size))
log.info("\nOptions chosen:")
log.info(" workflow: %s" % o.wfile)
log.info(" hosts: %s" % o.hfile)
log.info(" ini: %s" % o.inifile)
log.info(" timeout: %s" % o.timeout)
log.info(" phase: %s" % o.phase)
log.info(" server types: %s" % o.unparsed_servertypes)
log.info(" server name: %s" % o.unparsed_servernames)
log.info(" excluded servers: %s" % o.exclude)
log.info(" task id: %s" % o.task)
log.info(" tag id: %s" % o.tag)
log.info(" output level: %d" % o.output_level)
if o.force:
log.info(" force: True")
if o.yes:
log.info(" yes: True")
if o.automate:
log.info(" automate: True")
if o.list:
log.info(" list: True")
# for listing then if phase and task are not specified we will
# run all phases
if o.phase == None and o.task == None:
log.info("All phases will be listed")
o.phase = "postcheck"
if o.fix:
log.info(" fix: True")
# check here that any server in the exclusion list is found in the
# hosts file
if o.exclude != None:
excludes = []
# Now strip of spaces
excludes = [x.strip() for x in o.exclude.split(',')]
for excludedServer in excludes:
if not hosts.host_exists(excludedServer):
log.error(
"Excluded server %s is not in the hosts file %s" % \
(excludedServer, o.hfile))
return False
# validate servertype
o.servertypes = [x.strip() for x in o.unparsed_servertypes.split(',')]
if o.unparsed_servertypes != constants.ALL:
for servertype in o.servertypes:
if not servertype in hosts.hosts:
log.error(
"Server type %s selected is not in hosts file" % \
servertype)
return False
# validate servername
o.servernames = [x.strip() for x in o.unparsed_servernames.split(',')]
if o.unparsed_servernames != constants.ALL:
for servername in o.servernames:
if not hosts.host_exists(servername):
log.error(
"Server name %s selected is not in hosts file" % \
servername)
return False
wf = Workflow(self.config)
if not wf.parse(o.wfile):
return False
try:
wfsys = wf.genWorkflowSystem(hosts)
except Exception as err:
log.error("Failed to generate workflow list: %s" % str(err))
log.debug("Exception: %s" % (traceback.format_exc()))
return False
# validate task is valid
if o.task != None:
if not wfsys.taskInWorkflow(o.task):
log.error("Task id %s selected is not in workflow file" % \
o.task)
return False
# validate tag is valid
if o.tag != None:
if not wfsys.tagInWorkflow(o.tag):
log.error("Tag %s selected is not in workflow file" % \
o.tag)
return False
# Validate fix task is FabricTask
if o.fix:
taskobj = wfsys.getTask(o.task)
if not isinstance(taskobj, FabricTask):
log.error("Fix is not supported on task %s" % \
o.task)
return False
# Global status is in same directory as workfile, but appended with
# hostname file and status.xml
prefix = o.wfile.split('.xml')
dirs = o.hfile.split("/")
hostfile = dirs[len(dirs) - 1].split(".")[0]
sysfilename = o.getSysStatusName()
# flag for whether we are simply merging wflow and hosts and exiting
# at start of a --list run
listExitEarly = False
# Check if already got work file system
if os.path.isfile(sysfilename):
log.info(" previous run: %s" % sysfilename)
loadsys = WorkflowSystem("", self.config)
loadsys.load(sysfilename, hosts)
if wfsys.isEquivalent(loadsys):
log.debug("Previous run is equivalent to current files")
wfsys = loadsys
else:
log.error("Workflow and/or hosts file has changed since "\
"previous run, please investigate")
return False
else:
# if --list and there is no pre-existing workflow file then we
# generate a listing file and exit straight away
if o.list:
log.info("There is no pre-existing status file")
listExitEarly = True
else:
log.info(" previous run: N/A")
wfsys.write(sysfilename)
# if --list then ascertain whether all eligible tasks are in a
# complete state
if o.list and wfsys.eligibleDisplayTasks(o.servertypes, o.servernames,
o.exclude, o.force,
o.exact_match):
log.info("Display phase has not been completed and therefore "
"later phases cannot be predicted")
listExitEarly = True
if listExitEarly:
fnamesuffix = constants.LISTFILE_SUFFIX
log.info("\nWorkflow file and hosts file have been merged to " \
"create list file %s%s, equivalent to a master status file" % \
(sysfilename, constants.LISTFILE_SUFFIX))
wfsys.write("%s%s" % (sysfilename, constants.LISTFILE_SUFFIX))
sys.exit(0)
wfsys.logqueue = self.logqueue
runner = CmdLineWorkflowRunner(wfsys, self.term_size, o)
if o.list:
log.info("\nListing has been run from the pre-existing master "\
"status file onwards, with predictive output written "
"to file %s%s" % (sysfilename,
constants.LISTFILE_SUFFIX))
return runner.run()
def dynamicUpdate(self, wf, wfsys, sysfilename, hosts, menuMsgs):
""" updates the master status file
- firstly as a tmp file, then reads in and validates the tmp
file and if ok renames to master status file
Arguments:
wf: the original workflow (for validation)
wfsys: the workflowsys
sysfilename: name of the master status file
hosts: the hosts object
menuMsgs: list to hold messages for display during interaction
Returns:
True if master valid master status file was produced,
False if errors were encountered
"""
# now update the workflow file as tmp file
tmpsysfile = "%s_tmp" % sysfilename
wfsys.write(tmpsysfile)
log.debug("New tmp status file %s written" % tmpsysfile)
# now attempt to reload the tmp file - which will validate against xsd
loadtmp = WorkflowSystem("", self.config)
if not loadtmp.load(tmpsysfile, hosts):
menuMsgs.append("Failed to reload new master status file. " \
"Investigate the problem, then remove invalid " \
"temporary status file %s," \
" and rerun the dynamic alteration" % tmpsysfile)
return False
# now perform equivalency test against original workflow
wfcheck = wf.genWorkflowSystem(hosts)
if not wfcheck.isEquivalent(loadtmp):
menuMsgs.append("New master status file does not match original" \
" workflow. " \
"Investigate the problem, then remove invalid " \
"temporary status file %s," \
" and rerun the dynamic alteration" % tmpsysfile)
return False
# if validated ok then rename the tmp file as the new master status
# file
# write backup file before updating the status file
tstamp = datetime.datetime.now().strftime("%Y%m%d_%H%M%S")
backupdir = "dynamic_alteration_backups"
if '/' in sysfilename:
sysfilesplit = sysfilename.rsplit('/', 1)
basedir = sysfilesplit[0]
basename = sysfilesplit[1]
else:
basedir = "./"
basename = sysfilename
timestampedBackup = "%s/%s/%s.%s" % \
(basedir, backupdir, basename, tstamp)
# retrieve full path of backup dir
backupdir = timestampedBackup.rsplit('/', 1)[0]
if not os.path.exists(backupdir):
log.debug("creating backup directory %s" % backupdir)
os.mkdir(backupdir)
wfsys.write(timestampedBackup)
log.debug("Timestamped backup %s created" % timestampedBackup)
log.debug("Renaming temp status file %s as master status file %s" % \
(tmpsysfile, sysfilename))
try:
os.rename(tmpsysfile, sysfilename)
except:
menuMsgs.append("Error renaming temporary file %s to master "
"status file %s" % (tmpsysfile, sysfilename))
return False
return True
def dynamicAlterations(self, o, hosts, ini):
""" does the processing for a dynamic alterations run
Arguments:
o: the WorkflowOptions object
hosts: hosts object
ini: the ini file params object
Returns:
boolean - True if completed ok
"""
wf = Workflow(self.config)
sysfilename = o.getSysStatusName()
menuMsgs = []
if not wf.parse(o.wfile):
log.info("Error encountered when parsing workflow file")
return False
try:
wfsys = wf.genWorkflowSystem(hosts)
except Exception as err:
log.error("Failed to generate workflow : %s" % str(err))
log.debug("Exception: %s" % (traceback.format_exc()))
return False
dynamicMenu = DynamicMenuMgr(self.term_size, self.config, hosts,
self.dynamicTaskValidator)
while True:
log.debug("Starting loop with menuMsgs length %d" % \
len(menuMsgs))
# Check if already got work file system
if os.path.isfile(sysfilename):
loadsys = WorkflowSystem("", self.config)
loadsys.load(sysfilename, hosts)
if wfsys.isEquivalent(loadsys):
log.debug("Previous run is equivalent to current "
"files - operating on status file")
wfsys = loadsys
else:
log.error("Workflow and/or hosts file has "
"changed since previous run, please investigate")
return False
else:
log.debug("A new master status file will be created")
dyntask = dynamicMenu.getDynamicAlteration(wfsys, menuMsgs)
if dyntask == None:
log.info("Quitting dynamic alterations")
return True
elif dyntask == {}:
log.debug("Dynamic alteration empty")
menuMsgs = []
else:
log.debug("Dynamic task input: %s" % dyntask)
menuMsgs = []
if not self.processDynamicAlteration(dyntask, wf, wfsys,
sysfilename, hosts, menuMsgs):
if len(menuMsgs) == 0:
menuMsgs.append("Unspecified error during " \
"processing %s, dynamic alteration " \
"abandoned, please check logs" % \
dyntask[constants.DYN_ID])
log.debug("Finished processDynamicAlteration with "
"menuMsg %s" % menuMsgs)
def start(self):
# Read in command line options
o = WorkflowOptions()
o.parse()
if o.version:
if os.path.exists(constants.VERSION_FILE):
with open(constants.VERSION_FILE, 'r') as fin:
print fin.read()
else:
print "VERSION information was unavailable"
return True
FORMAT = '%(asctime)-15s %(message)s'
# Find the filename bit of filename
workfile = utils.get_file_less_ext(o.wfile)
hostfile = utils.get_file_less_ext(o.hfile)
starttime = datetime.datetime.now().strftime("%d%m%Y_%H%M%S")
# Check if already running - note that this is protecting us
# from having two processes updating the same
# master status file
if self.alreadyRunning(o.wfile, o.hfile, o.allow_multiple):
if o.allow_multiple:
print "Exiting as instance of wfeng already running " + \
"with same hostfile and workfile"
else:
print "Exiting as instance of wfeng already running"
return False
self.logfilename = "%s/%s_%s_%s.log" %\
(constants.LOG_DIR, workfile, hostfile, starttime)
self.tracefilename = "%s/%s_%s_%s.trc" %\
(constants.LOG_DIR, workfile, hostfile, starttime)
logging.addLevelName(constants.TRACE, "TRACE")
logging.addLevelName(constants.DEBUGNOTIME, "DEBUGNOTIME")
logging.basicConfig(filename=self.tracefilename,
level=constants.TRACE,
format=FORMAT)
console = logging.StreamHandler()
console.setLevel(logging.INFO)
logging.getLogger('wfeng').addHandler(console)
# Add debug handler
debug = logging.FileHandler(self.logfilename)
debug.setLevel(logging.DEBUG)
formatter = WfengFormatter('%(asctime)s %(message)s')
debug.setFormatter(formatter)
logging.getLogger('wfeng').addHandler(debug)
# Create queue for subprocesses
self.logqueue = multiprocessing.Queue()
self.config = WfmgrConfig()
self.config.load()
if not os.path.isfile(o.wfile):
log.error("Workflow file %s does not exist" % o.wfile)
return False
if not os.path.isfile(o.hfile):
log.error("Host file %s does not exist" % o.hfile)
return False
ini = WfengIni()
# Load default
if not ini.load():
return False
if o.inifile is not None:
if not ini.load(o.inifile):
return False
self.config.iniparams = ini.vars
hosts = Hosts()
if not hosts.parse(o.hfile):
return False
# if we are adding/removing dynamic pause/esc then
# process interactively and exit
if o.alter_pause_escape:
try:
dynAltOk = self.dynamicAlterations(o, hosts, ini)
if not dynAltOk:
log.info("Error in dynamic alterations menu interaction")
return False
return True
except KeyboardInterrupt:
log.info("\nUnexpected interrupt (CTRL/C) received - " \
"please check status file is as expected\n")
return False
if o.needMenu():
o.getMenuOptions(self.term_size, self.config)
os.system('clear')
log.info("WORKFLOW ENGINE".center(self.term_size))
log.info("----------------".center(self.term_size))
log.info("\nOptions chosen:")
log.info(" workflow: %s" % o.wfile)
log.info(" hosts: %s" % o.hfile)
log.info(" ini: %s" % o.inifile)
log.info(" timeout: %s" % o.timeout)
log.info(" phase: %s" % o.phase)
log.info(" server types: %s" % o.unparsed_servertypes)
log.info(" server name: %s" % o.unparsed_servernames)
log.info(" excluded servers: %s" % o.exclude)
log.info(" task id: %s" % o.task)
log.info(" tag id: %s" % o.tag)
log.info(" output level: %d" % o.output_level)
if o.force:
log.info(" force: True")
if o.yes:
log.info(" yes: True")
if o.automate:
log.info(" automate: True")
if o.list:
log.info(" list: True")
# for listing then if phase and task are not specified we will
# run all phases
if o.phase == None and o.task == None:
log.info("All phases will be listed")
o.phase = "postcheck"
if o.fix:
log.info(" fix: True")
# check here that any server in the exclusion list is found in the
# hosts file
if o.exclude != None:
excludes = []
# Now strip of spaces
excludes = [x.strip() for x in o.exclude.split(',')]
for excludedServer in excludes:
if not hosts.host_exists(excludedServer):
log.error(
"Excluded server %s is not in the hosts file %s" % \
(excludedServer, o.hfile))
return False
# validate servertype
o.servertypes = [x.strip() for x in o.unparsed_servertypes.split(',')]
if o.unparsed_servertypes != constants.ALL:
for servertype in o.servertypes:
if not servertype in hosts.hosts:
log.error(
"Server type %s selected is not in hosts file" % \
servertype)
return False
# validate servername
o.servernames = [x.strip() for x in o.unparsed_servernames.split(',')]
if o.unparsed_servernames != constants.ALL:
for servername in o.servernames:
if not hosts.host_exists(servername):
log.error(
"Server name %s selected is not in hosts file" % \
servername)
return False
wf = Workflow(self.config)
if not wf.parse(o.wfile):
return False
try:
wfsys = wf.genWorkflowSystem(hosts)
except Exception as err:
log.error("Failed to generate workflow list: %s" % str(err))
log.debug("Exception: %s" % (traceback.format_exc()))
return False
# validate task is valid
if o.task != None:
if not wfsys.taskInWorkflow(o.task):
log.error("Task id %s selected is not in workflow file" % \
o.task)
return False
# validate tag is valid
if o.tag != None:
if not wfsys.tagInWorkflow(o.tag):
log.error("Tag %s selected is not in workflow file" % \
o.tag)
return False
# Validate fix task is FabricTask
if o.fix:
taskobj = wfsys.getTask(o.task)
if not isinstance(taskobj, FabricTask):
log.error("Fix is not supported on task %s" % \
o.task)
return False
# Global status is in same directory as workfile, but appended with
# hostname file and status.xml
prefix = o.wfile.split('.xml')
dirs = o.hfile.split("/")
hostfile = dirs[len(dirs) - 1].split(".")[0]
sysfilename = o.getSysStatusName()
# flag for whether we are simply merging wflow and hosts and exiting
# at start of a --list run
listExitEarly = False
# Check if already got work file system
if os.path.isfile(sysfilename):
log.info(" previous run: %s" % sysfilename)
loadsys = WorkflowSystem("", self.config)
loadsys.load(sysfilename, hosts)
if wfsys.isEquivalent(loadsys):
log.debug("Previous run is equivalent to current files")
wfsys = loadsys
else:
log.error("Workflow and/or hosts file has changed since "\
"previous run, please investigate")
return False
else:
# if --list and there is no pre-existing workflow file then we
# generate a listing file and exit straight away
if o.list:
log.info("There is no pre-existing status file")
listExitEarly = True
else:
log.info(" previous run: N/A")
wfsys.write(sysfilename)
# if --list then ascertain whether all eligible tasks are in a
# complete state
if o.list and wfsys.eligibleDisplayTasks(o.servertypes, o.servernames,
o.exclude,
o.force, o.exact_match):
log.info("Display phase has not been completed and therefore "
"later phases cannot be predicted")
listExitEarly = True
if listExitEarly:
fnamesuffix = constants.LISTFILE_SUFFIX
log.info("\nWorkflow file and hosts file have been merged to " \
"create list file %s%s, equivalent to a master status file" % \
(sysfilename, constants.LISTFILE_SUFFIX))
wfsys.write("%s%s" % (sysfilename, constants.LISTFILE_SUFFIX))
sys.exit(0)
wfsys.logqueue = self.logqueue
runner = CmdLineWorkflowRunner(wfsys, self.term_size, o)
if o.list:
log.info("\nListing has been run from the pre-existing master "\
"status file onwards, with predictive output written "
"to file %s%s" % (sysfilename,
constants.LISTFILE_SUFFIX))
return runner.run()
