def loop(start_pwm, stop_pwm, step, printchar):
for x in range(start_pwm, stop_pwm, step):
wiringpi.pwmWrite(18, x)
# if x is an exact multiple of 19, i.e. x/19 has remainder 0
if x % (19) == 0:
display(printchar) # print the + or - character
sleep(rest)
def on_message(aioClient, feed_id, msg): payload = msg.partition(MESSAGE_DELIM) if type(payload[2]) is '': print '%s, missing timestamp in payload: %s' % (feed_id, msg) return None try: global last_ts value = float(payload[0]) ts = float(payload[2]) if ((feed_id == aio_switch_feedid) and (ts > last_ts) and (feed_id == aio_switch_feedid) ): if(value == 1): print "%s: switch is on, turn it off" % feed_id rotate_arm(175) time.sleep(TICK_S) rotate_arm(ROTATE_NEUTRAL) time.sleep(TICK_S) wiringpi.pwmWrite(PWM_PIN, 0) last_ts = time.time() else: print "%s switch is off" % feed_id last_ts = time.time() elif ( (feed_id == aio_rotate_feedid) and (ts > last_ts)): rotate_arm(value) time.sleep(TICK_S) wiringpi.pwmWrite(PWM_PIN, 0) last_ts = time.time() except ValueError: print "%s: bad switch message: %s" % (feed_id, msg)
def Update(self):
if (time.time() - self.brightStart > 5):
backLight = 500
if (time.localtime().tm_hour > 22 or time.localtime().tm_hour < 5):
backLight = 1
wiringpi.pwmWrite(18, backLight)
pygame.mouse.set_visible(False)
def main():
#all needs to run automatically
port0 = '/dev/ttyUSB0'
port1 = '/dev/ttyUSB1'
port2 = '/dev/ttyUSB2'
##
th_cl1 = TestThread(port1, './original_data/data1208.csv')
th_cl1 = TestThread(port1, './original_data/data1208.csv')
#th_cl1.start()
#th_cl2.start()
f = open('./original_data/data1209.csv', 'w')
##
servo_pin = 18
param = sys.argv
set_degree = int(param[1])
print(set_degree)
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(servo_pin, 2)
wiringpi.pwmSetMode(0)
wiringpi.pwmSetRange(1024)
wiringpi.pwmSetClock(375)
while True:
try:
ser = serial.Serial(port0, 38400, timeout=10) # 10s-timeout baudrate=38400
ser.write(b'<RM,>??\r\n') # send command (CR+LF)
line = ser.readline()
line = str(datetime.datetime.now()) + str(",") + line.decode('utf-8')
line = line.split(',')
velocity = float(line[2])
temp = float(line[5])
print('CPU_temperature' + '/' + line[0] + ',' + line[2] + ','
+ line[3] + ',' + line[4] + ',' + line[5])
f.write(line[0] + ',' + line[2] + ','
+ line[3] + ',' + line[4] + ',' + line[5] + "\n")
if temp >= 35.0:
# print('too hot')
wiringpi.pwmWrite(servo_pin, set_degree + 5)
# LED(11, True)
else:
# print('oh.. cool')
# move_deg = int (81+41/90*set_degree)
wiringpi.pwmWrite(servo_pin, set_degree)
# LED(11, False)
time.sleep(5)
except IndexError:
pass
def __init__(self, dev=(0,0),speed=4000000, brightness=256, contrast=CONTRAST):
self.spi = spidev.SpiDev()
self.speed = speed
self.dev = dev
self.spi.open(self.dev[0],self.dev[1])
self.spi.max_speed_hz=self.speed
# Set pin directions.
self.dc = DC
self.rst = RST
wiringpi.wiringPiSetup()
for pin in [self.dc, self.rst]:
wiringpi.pinMode(pin, 1)
self.contrast=contrast
self.brightness=brightness
# Toggle RST low to reset.
wiringpi.digitalWrite(self.rst, OFF)
time.sleep(0.100)
wiringpi.digitalWrite(self.rst, ON)
# Extended mode, bias, vop, basic mode, non-inverted display.
wiringpi.digitalWrite(self.dc, OFF)
self.spi.writebytes([0x21, 0x14, self.contrast, 0x20, 0x0c])
# cls()
self.ledpin = LED
if self.ledpin == 1:
wiringpi.pinMode(self.ledpin, 2)
wiringpi.pwmWrite(self.ledpin, self.brightness)
else:
wiringpi.pinMode(self.ledpin, 1)
wiringpi.digitalWrite(self.ledpin, ON)
def updateLights():
global tlConfig
STEP_INTERVAL = 1 / PWM_FREQ # how often
STEP_BRIGHTNESS = 1 / (tlConfig.lightsFadeTime * PWM_FREQ) # how much
currentBrightness = 1.00
while not shutdownFlag:
changed = False
if abs(currentBrightness - targetBrightness) > STEP_BRIGHTNESS / 2:
if currentBrightness < targetBrightness:
currentBrightness += STEP_BRIGHTNESS
changed = True
elif currentBrightness > targetBrightness:
currentBrightness -= STEP_BRIGHTNESS
changed = True
if changed:
if config.get('lights', 'pwm_mode') == 'HW':
wiringpi.pwmWrite(TL_PWM, math.trunc(1024 * (1.00 - currentBrightness)))
elif config.get('lights', 'pwm_mode') == 'SW':
wiringpi.softPwmWrite(TL_PWM, math.trunc(100 * (1.00 - currentBrightness)))
rootLogger.debug("{0:.2f} <- {1} <- {2:.2f}".format(currentBrightness, lastEvent, targetBrightness))
time.sleep(STEP_INTERVAL)
def __init__(self):
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(self.PIN_PWM, wiringpi.GPIO.PWM_OUTPUT)
wiringpi.pwmSetMode(wiringpi.GPIO.PWM_MODE_MS)
wiringpi.pwmSetClock(375)
wiringpi.pwmWrite(self.PIN_PWM, self.FRONT)
def led(self, led_value):
if self.ledpin == 1:
wiringpi.pwmWrite(self.ledpin,led_value)
else:
if led_value == 0:
wiringpi.digitalWrite(self.ledpin, OFF)
else:
wiringpi.digitalWrite(self.ledpin, ON)
def shutoffRobot():
wp.pwmWrite(PWM_L, OFF)
wp.pwmWrite(PWM_R, OFF)
wp.digitalWrite(INPUT_2_LEFT, OFF)
wp.digitalWrite(INPUT_1_LEFT, OFF)
wp.digitalWrite(INPUT_1_RIGHT, OFF)
wp.digitalWrite(INPUT_2_RIGHT, OFF)
print 'turn off'
def shutoffRobot():
wp.pwmWrite(PWM_L, 0)
wp.pwmWrite(PWM_R, 0)
wp.digitalWrite(INPUT_2_LEFT_MOTOR, 0)
wp.digitalWrite(INPUT_1_LEFT_MOTOR, 0)
wp.digitalWrite(INPUT_1_RIGHT_MOTOR, 0)
wp.digitalWrite(INPUT_2_RIGHT_MOTOR, 0)
print 'turn off'
def __del__(self): wp.pwmWrite(self.pwm, PWM_MIN) wp.digitalWrite(self.outA, LOW) wp.digitalWrite(self.outB, LOW) wp.pinMode(self.pwm, INPUT_MODE) wp.pinMode(self.outA, INPUT_MODE) wp.pinMode(self.outB, INPUT_MODE)
def function PwmControl(self,turnForward):
if turnForward:
for i in range(255):
wiringpi.pwmWrite(MotorEnable,i)
sleep(.001)
else:
for i in range(255,0,-1):
wiringpi.pwmWrite(MotorEnable,i)
sleep(.001)
def on_connect(aioClient):
global last_ts
rotate_arm(ROTATE_NEUTRAL)
time.sleep(TICK_S)
wiringpi.pwmWrite(PWM_PIN, 0)
# Once connected, hook into i/o events
aioClient.subscribe(aio_switch_feedid)
aioClient.subscribe(aio_rotate_feedid)
print 'subscribing to feeds: %s, %s' % (aio_switch_feedid, aio_rotate_feedid)
last_ts = time.time()
def initOS(): os.environ['SDL_FBDEV'] = '/dev/fb1' os.environ['SDL_MOUSEDEV'] = '/dev/input/touchscreen' os.environ['SDL_MOUSEDRV'] = 'TSLIB' os.environ['SDL_VIDEODRIVER'] = 'fbcon' wiringpi.wiringPiSetupGpio() wiringpi.pinMode(18, 2) wiringpi.pwmSetMode(wiringpi.PWM_MODE_MS) # default balanced mode makes screen dark at about 853/1024 wiringpi.pwmWrite(18, 1024)
def setSpeed(self, speed): # Constrain if speed > PWM_MAX: speed = PWM_MAX elif speed < PWM_MIN: speed = PWM_MIN wp.pwmWrite(self.pwm, speed) self.speed = speed
def setup():
# Set pin directions.
wiringpi.wiringPiSetup()
for pin in [DC, RST]:
wiringpi.pinMode(pin, ON)
wiringpi.pinMode(LED,2)
wiringpi.pwmWrite(LED,128)
spi.open(0,0)
spi.max_speed_hz=5000000
def sendToRPi(self):
for pn in range(0, 6):
pin = self.motorPins[pn]
val = self.pinValues[pn]
if not Globals.globSimulate:
wiringpi.digitalWrite(pin, 1 if val else 0)
if not Globals.globSimulate:
wiringpi.pwmWrite(18, self.pwmValue)
if self.debug:
print "Sent to RPi: pinValues(%s) pwmValue(%s)" % (self.pinValues, self.pwmValue)
def rotate_arm(angle=ROTATE_NEUTRAL): global rotation angle = float(angle) if (angle > 180): angle = 180 elif (angle < 0): angle = 0 target = angle_to_duty_cycle(angle) rotation = target wiringpi.pwmWrite(PWM_PIN, rotation) print "rotate to target angle: %s, duty-cycle: %s/1024" % (angle, rotation)
def setSpeed(self, speed):
if speed < 0:
speed = -speed
dir_value = 1
else:
dir_value = 0
if speed > MAX_SPEED:
speed = MAX_SPEED
io_init()
wiringpi.digitalWrite(self.dir_pin, dir_value)
wiringpi.pwmWrite(self.pwm_pin, speed)
def __init__(self, pins):
threading.Thread.__init__(self)
Observable.__init__(self)
if len(pins) != 6:
raise "MotorDriver needs 6 pins"
self.motorPins = pins
if not Globals.globSimulate:
for pn in range(0, 6):
pin = self.motorPins[pn]
wiringpi.pinMode(pin, GPIO_OUTPUT)
wiringpi.pinMode(18, GPIO_PWM)
wiringpi.pwmWrite(18, self.pwmValue)
def set_brightness(self, led_value): #''' #Set the backlight LED brightness. Valid values are 0 <-> 1023 #When not connected to the PWM port, any value > 0 will turn the LED on full #''' assert(0 <= led_value <= 1023) if self.ledpin == 1: wiringpi.pwmWrite(self.ledpin, led_value) else: if led_value == 0: wiringpi.digitalWrite(self.ledpin, OFF) else: wiringpi.digitalWrite(self.ledpin, ON) self.brightness = led_value
def update_physical_state(self):
"""Send the right values to the GPIO pins."""
# Do some note taking
self.update_state_histories()
if self._not_initialized:
logger.info('initializing state, should only happen once or so')
self.initialize_state()
if not self.same_physical_state():
logger.info('State: L {} R {} DIR {}'.format(self.left_motor, self.right_motor, self.steering_servo))
# If we are on the rPi, make the physical state changes
if self.use_motors:
self.setSpeed(self.m1conf.get('pwm_pin'), self.m1conf.get('dir_pin'), self.left_motor)
self.setSpeed(self.m2conf.get('pwm_pin'), self.m2conf.get('dir_pin'), self.right_motor)
if self.use_servo:
logger.info('Turning Servo DIR {} PIN {}'.format(self.steering_servo, self.servo_gpio_pin))
wiringpi.pwmWrite(self.servo_gpio_pin, self.steering_servo)
self.previous_physical_state = self.health_check().get('health_check', {})
def setup_gpio():
wiringpi.wiringPiSetup()
# Set pin directions.
# outputs :
for pin in [DIN, SCLK, DC, RST, SCE]:
wiringpi.pinMode(pin, OUT)
# inputs :
for pin in [UP, RIGHT, DOWN, LEFT, SELECT]:
wiringpi.pinMode(pin, IN)
# enable pull downs for the switches
wiringpi.pullUpDnControl(UP, wiringpi.PUD_DOWN)
wiringpi.pullUpDnControl(RIGHT, wiringpi.PUD_DOWN)
wiringpi.pullUpDnControl(DOWN, wiringpi.PUD_DOWN)
wiringpi.pullUpDnControl(LEFT, wiringpi.PUD_DOWN)
wiringpi.pullUpDnControl(SELECT, wiringpi.PUD_DOWN)
wiringpi.pinMode(LED,2) # pwm mode
wiringpi.pwmWrite(LED,128) # mid-level
def initialize_state(self):
self._not_initialized = False
self._MAX_SPEED = self.config.get('max_motor_speed', 10)
self._MIN_SPEED = self._MAX_SPEED * -1
self.MIN_SERVO = self.config.get('min_servo', 100)
self.MAX_SERVO = self.config.get('max_servo', 100)
self.ZERO_SERVO = self.config.get('zero-servo', 150)
self._INITIAL_SERVO = 100
gears = 5
for index in range(1, gears + 1):
self.gear_lookup[index] = int((self._MAX_SPEED / gears) * index)
logger.info('Setting gears: ' + str(self.gear_lookup))
if self.use_motors or self.use_servo:
res = wiringpi.wiringPiSetupGpio()
if res != 0:
logger.error('Could not set up software PWM')
if self.use_motors:
logger.info('Setting up Motor Software-Based PWM')
# a cluster of horrible looking code, should be refactored but is it single use???
wiringpi.pinMode(self.m1conf.get('en_pin'), wiringpi.GPIO.OUTPUT)
wiringpi.pinMode(self.m1conf.get('dir_pin'), wiringpi.GPIO.OUTPUT)
wiringpi.pinMode(self.m2conf.get('en_pin'), wiringpi.GPIO.OUTPUT)
wiringpi.pinMode(self.m2conf.get('dir_pin'), wiringpi.GPIO.OUTPUT)
logger.info('Pull both motors out of low-power mode')
wiringpi.digitalWrite(self.m1conf.get('en_pin'), 1)
wiringpi.digitalWrite(self.m2conf.get('en_pin'), 1)
logger.info('Set up motor software pwm')
wiringpi.softPwmCreate(self.m1conf.get('pwm_pin'), 0, self._MAX_SPEED)
wiringpi.softPwmCreate(self.m2conf.get('pwm_pin'), 0, self._MAX_SPEED)
wiringpi.softPwmWrite(self.m1conf.get('pwm_pin'), 0)
wiringpi.softPwmWrite(self.m2conf.get('pwm_pin'), 0)
logger.info('Setting motor speeds to zero.')
if self.use_servo:
logger.info('Setting up Servo Hardware-Based PWM')
wiringpi.pinMode(self.servo_gpio_pin, wiringpi.GPIO.PWM_OUTPUT)
wiringpi.pwmSetMode(wiringpi.GPIO.PWM_MODE_MS)
wiringpi.pwmSetClock(192)
wiringpi.pwmSetRange(2000)
logger.info('Servo config done')
wiringpi.pwmWrite(self.servo_gpio_pin, self.ZERO_SERVO)
logger.info('Setting servo speed to zero.')
def set_servo_position(pos):
"""
Turn servo on specified angle in degrees
Params:
pos: angle to turn servo, in degrees
"""
move = int(40 + math.floor(pos * (200 - 40) / 180))
print("pos: {}".format(pos))
print("move: {}".format(move))
if move:
print("move: ", move)
try:
wiringpi.pwmWrite(SERVO_PIN, move)
# time.sleep(0.5)
# print("wiringpi.pwmWrite(18,{})".format(move))
except:
# clean up
wiringpi.pwmWrite(18, 0)
print("Exception")
def __init__(self, sensor_pin=27, detector_delay=1, settletime=0.01):
""" Initialize the tripwire. See module documentation for the details
of the parameter settings used here.
"""
self.sensor_pin = sensor_pin
self.detector_delay = detector_delay
self.logger = logging.getLogger('main.tripwire')
GPIO.setmode(GPIO.BCM)
GPIO.setup(self.sensor_pin, GPIO.IN)
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(PWM_PIN, 2)
# Choose mark-space mode for better frequency control
wiringpi.pwmSetMode(wiringpi.GPIO.PWM_MODE_MS)
wiringpi.pwmSetRange(2)
wiringpi.pwmSetClock(253)
wiringpi.pwmWrite(PWM_PIN, 1) # set duty cycle to 1 over range=2, or 50%
time.sleep(settletime) # I'm not sure how long is necessary,
# the demodulator datasheet
# suggests at least 0.0004 s
self.logger.info('IRon curtain initialized.')
def safe_exit():
"""Ensures exit is handled cleanly.
Shuts down hardware, quits pygame, and raises SystemExit.
Args:
None.
Returns:
None.
Raises:
SystemExit.
"""
if __debug__: print("Quiting WiringPi.")
wiringpi.pwmWrite(18, 0) # set pwm to zero
wiringpi.digitalWrite(18, 0) # port 18 off
wiringpi.digitalWrite(17, 0) # port 17 off
wiringpi.pinMode(17, 0) # port 17 back to input mode
wiringpi.pinMode(18, 0) # port 18 back to input mode
if __debug__: print("Quiting Pygame.")
pygame.quit()
if __debug__: print("Raising SystemExit.")
raise SystemExit
def set_left_speed(self, dc):
wp.pwmWrite(18, dc)
def set_right_speed(self, dc):
wp.pwmWrite(19, dc)
def __init__(self):
GPIO.setmode(GPIO.BCM)
# output pin definitions
self.arm_up = 26
self.arm_down = 13
self.claw_open = 23
self.claw_close = 24
self.forward = 5
self.backward = 6
self.right = 4
self.left = 17
self.led = 18
out_pins = [
self.arm_up, self.arm_down, self.claw_open, self.claw_close,
self.forward, self.backward, self.right, self.left, self.led
]
for pin in out_pins:
GPIO.setup(pin, GPIO.OUT)
self.forward_pwm = GPIO.PWM(self.forward, 15)
self.backward_pwm = GPIO.PWM(self.backward, 15)
for pwm in [self.forward_pwm, self.backward_pwm]:
pwm.start(0)
pwm.ChangeFrequency(15)
# hardware pwm
'''
self.hardware_pwm_pin = 18
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(self.hardware_pwm_pin, wiringpi.GPIO.PWM_OUTPUT)
wiringpi.pwmSetMode(wiringpi.GPIO.PWM_MODE_MS)
wiringpi.pwmSetClock(192)
self.hardware_pwm_range = 2000
wiringpi.pwmSetRange(self.hardware_pwm_range)
self.hardware_pwm = int(self.hardware_pwm_range*0.055)
wiringpi.pwmWrite(self.hardware_pwm_pin,self.hardware_pwm) # 5.5% duty cycle
self.hardware_pwm_timeflag = time.time()
'''
# itermitent move
self.itm_k = 100
self.itm_checkpoint = time.time()
self.itm_press = 0
# connection cont
self.led_cont = 100
self.restarting = False
return
self.direction = 'steady'
out_pins = [12, 13, 4, 27]
self.speed = 0
self.in_routine = False
for pin in out_pins:
GPIO.setup(pin, GPIO.OUT)
self.pwms = [GPIO.PWM(pin, 15) for pin in out_pins]
for pwm in self.pwms:
pwm.start(self.speed)
pwm.ChangeFrequency(15)
# distances
self.distances = [0 for i in range(3)]
# servos
self.servo = 18
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(self.servo, wiringpi.GPIO.PWM_OUTPUT)
wiringpi.pwmSetMode(wiringpi.GPIO.PWM_MODE_MS)
wiringpi.pwmSetClock(192)
self.pwm_range = 2000
wiringpi.pwmSetRange(self.pwm_range)
self.servo_pwm = int(self.pwm_range * 0.055)
wiringpi.pwmWrite(self.servo, self.servo_pwm) # 5.5% duty cycle
self.in_routine = False
self.routine = None
self.sensor_data = {
"left": 0,
"right": 0,
"speed": self.speed,
"inRoutine": (self.in_routine == None),
}
self.last_right = 0
self.last_left = 0
self.servo_time_set = time.time()
self.LED = 20
GPIO.setup(self.LED, GPIO.OUT)
GPIO.output(self.LED, 1)
def initOS(scrntyp, configdir):
global bootime, osversion, hwinfo, screentype, hostname, screenwidth, screenheight, portrait, dispratioW, dispratioH, DimType, dimpin
screentype = scrntyp
os.nice(-10)
# hostname = socket.gethostname()
# get platform info
with open('/proc/stat', 'r') as f:
for line in f:
if line.startswith('btime'):
bootime = int(line.split()[1])
osversion = platform.platform()
with open('/proc/device-tree/model') as f:
hwinfo = f.read()
screendefs = {}
with open('screendefinitions') as f:
defs = f.read().splitlines()
for l in defs:
screenitem = l.split('|')
screendefs[screenitem[0]] = screenitem[1:]
try:
# allow overwrite of system values
with open(configdir + '/screendefinitions') as f:
defs = f.read().splitlines()
for l in defs:
screenitem = l.split('|')
screendefs[screenitem[0]] = screenitem[1:]
except:
pass
if screentype not in screendefs:
print('Screen type undefined')
raise ValueError
if screendefs[screentype][1] != 'XWin':
if 'DISPLAY' in os.environ: del os.environ['DISPLAY']
os.environ['SDL_FBDEV'] = screendefs[screentype][0]
os.environ['SDL_VIDEODRIVER'] = screendefs[screentype][1]
DimType = screendefs[screentype][2]
if DimType in ('PWM18', 'PWM19'):
if DimType == 'PWM18':
dimpin = 18
elif DimType == 'PWM19':
dimpin = 19
try:
# if this system has the newer screen control then turn off the SMTPE control so PWM works
with open('/sys/class/backlight/soc:backlight/brightness', 'w') as f:
f.write('0')
except:
pass
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(dimpin, 2)
wiringpi.pwmSetMode(wiringpi.PWM_MODE_MS) # default balanced mode makes screen dark at about 853/1024
wiringpi.pwmWrite(dimpin, 1024)
# print('Screen: {} Device: {} Driver: {} Dim: {}'.format(screentype, os.environ['SDL_FBDEV'],
# os.environ['SDL_VIDEODRIVER'], DimType))
pygame.display.init()
screenwidth, screenheight = (pygame.display.Info().current_w, pygame.display.Info().current_h)
if screenwidth > screenheight:
portrait = False
dispratioW = float(screenwidth) / float(basewidth)
dispratioH = float(screenheight) / float(baseheight)
GoBright(100)
def servo_control(self):
# Checking if text file used for memory by the program exists
if os.path.isfile('mem2.txt'):
print "Inside if (mem2.txt) already exists"
try:
# Opening storage file for reading
fp = open("mem2.txt", 'r')
except IOError:
print 'Cannot open storage file for reading'
else:
# Obtaining current position of the servo motor
current_val = [int(n) for n in fp.read().split()]
# Calculating the angle of deviation of the brightest object from the center of the frame
# in terms of the y-axis
# Vertical field of view for pi camera: 41.41 degrees +/- 0.11 degrees
# Converting pixel value which is the distance from the center pixel (150)
# Total number of pixels = 400 x 300
# Center = 150
angle = int((self.y_raw - 150) * 41.41 / 300)
# Defining the new angle/position for the servo motor
required_angle = angle + current_val[0]
# Preventing the servo from turning more than 90 degrees from its rest position of 0 degrees
# since the servo motor in use only has 180 degrees of freedom
if required_angle > 90:
required_angle = 90
elif required_angle < -90:
required_angle = -90
# Calculating the required pulse width corresponding to the desired
# servo motor angle/position
pulse_width = 133 + int(0.888 * required_angle)
time.sleep(0.1)
# Driving the servo motor
wiringpi.pwmWrite(18, pulse_width)
time.sleep(Servo.delay_period)
# Helpful debug statements
# print "Angle:",angle
# print "Requried angle:",required_angle
# Closing file that was opened for reading
fp.close()
# Writing new servo position to temporary storage file
self.write_to_temp_file_servo(required_angle)
else:
# Creating a text file with the initial/default position of the servo motor
self.write_to_temp_file_servo(Servo.default)
try:
# Opening storage file for reading
fp = open("mem2.txt", 'r')
except IOError:
print 'Cannot open storage file for reading'
else:
# Calculating the angle of deviation of the brightest object from the center of the frame
# in terms of the y-axis
# Vertical field of view for pi camera: 41.4 degrees
# Converting pixel value which is the distance from the center pixel (150)
# Total number of pixels = 400 x 300
# Center = 300
angle = int((self.y_raw - 150) * 41.41 / 300)
# Preventing the servo from turning more than 90 degrees from its rest position of 0 degrees
# since the servo motor in use only has 180 degrees of freedom
if angle > 90:
angle = 90
elif angle < -90:
angle = -90
# Calculating the required pulse width corresponding to the desired
# servo motor angle/position
pulse_width = 133 + int(0.888 * angle)
time.sleep(0.1)
# Driving the servo motor
wiringpi.pwmWrite(18, pulse_width)
time.sleep(Servo.delay_period)
# Closing file that was opened for reading
fp.close()
# Writing new servo position to the temporary storage file
self.write_to_temp_file_servo(angle)
# -*- coding: utf-8 -*-
import wiringpi
import time
import sys
servo_pin = 12
# get degree
param = sys.argv
set_degree = int(param[1])
print(set_degree)
wiringpi.wiringPiSetupGpio()
# input / output
wiringpi.pinMode( servo_pin, 2 )
wiringpi.pwmSetMode(0)
wiringpi.pwmSetRange(1024)
wiringpi.pwmSetClock(375)
wiringpi.pwmWrite( servo_pin, set_degree )
if ( set_degree >= -90 ):
move_deg = int( 81 + 41 / 90 * set_degree )
wiringpi.pwmWrite( servo_pin, move_deg )
# -*- coding: utf-8 -*-
from time import sleep
import wiringpi
pinSrv = 12
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(pinSrv, wiringpi.GPIO.PWM_OUTPUT)
wiringpi.pwmSetMode(wiringpi.GPIO.PWM_MODE_MS)
wiringpi.pwmSetClock(375)
wiringpi.pwmWrite(pinSrv, 50)
#S35 STD
rightcyc = 70
leftcyc = 80
stop = 75
list = [rightcyc, stop, leftcyc, stop]
try:
while True:
for duty in list:
wiringpi.pwmWrite(pinSrv, duty)
if duty == stop:
sleep(1)
else:
sleep(3)
except KeyboardInterrupt:
pass
import wiringpi import time SERVO_PIN = 18 wiringpi.wiringPiSetupGpio() wiringpi.pinMode(SERVO_PIN, wiringpi.GPIO.PWM_OUTPUT) wiringpi.pwmSetMode(wiringpi.GPIO.PWM_MODE_MS) wiringpi.pwmSetClock(192) wiringpi.pwmSetRange(1000) angle = 50 wiringpi.pwmWrite(SERVO_PIN, angle) time.sleep(1) angle = 140 wiringpi.pwmWrite(SERVO_PIN, angle)
def unlock():
wiringpi.pwmWrite(lockpin, 135)
print('Setting up motor pin')
wi.pinMode(args.motor_pin, wi.GPIO.PWM_OUTPUT)
# set the PWM mode to milliseconds stype
wi.pwmSetMode(wi.GPIO.PWM_MODE_MS)
print('setting clock, range to 192, 2000')
wi.pwmSetClock(192)
wi.pwmSetRange(2000)
scale = scale_to_motor(servo_min, servo_max, args.motor_min, args.motor_max)
for i in range(0, args.cycles):
# Indicate the motor should flow forward
wi.digitalWrite(dir_pin, 1)
for x in range(servo_min, servo_max, servo_step):
print('To X: ', x)
wi.pwmWrite(args.servo_pin, x)
wi.pwmWrite(args.motor_pin, scale(x))
time.sleep(.1)
# Indicate the motor should flow backward
wi.digitalWrite(dir_pin, 0)
for x in range(servo_max, servo_min, servo_step):
print('To X: ', x)
wi.pwmWrite(args.servo_pin, x)
wi.pwmWrite(args.motor_pin, scale(x))
time.sleep(.1)
def quit(self):
wiringpi.pwmWrite(self.pin, 0) # no pluse
def controlBrightness():
wiringpi.pwmWrite(led, comboStates['brightness'])
time.sleep(.2)
def change(self, speed):
pulse = self.calcPulse(speed)
wiringpi.pwmWrite(self.pin, pulse)
wiringpi.pinMode(18, wiringpi.GPIO.PWM_OUTPUT)
wiringpi.pinMode(13, wiringpi.GPIO.PWM_OUTPUT)
wiringpi.pwmSetMode(wiringpi.GPIO.PWM_MODE_MS)
# divide down clock for servos
wiringpi.pwmSetClock(192)
wiringpi.pwmSetRange(2000)
#handle servos and settings changes
startMillis = lastUpdate = int(round(time.time() * 1000))
while True:
time.sleep(MAIN_LOOP_DELAY)
if varDict['mode'] == 0:
millis = int(round(time.time() * 1000))
if millis - lastUpdate > 500:
lastUpdate = millis
wiringpi.pwmWrite(18, varDict['x'])
wiringpi.pwmWrite(13, varDict['y'])
elif varDict['mode'] == 1:
millis = int(round(time.time() * 1000))
x = pnoise1((startMillis - millis) / PERLIN_SPEED + 1234.56789,
octaves=4)
y = pnoise1((startMillis - millis) / PERLIN_SPEED, octaves=4)
wiringpi.pwmWrite(18, int((x + 1) / 2 * 200 + 50))
wiringpi.pwmWrite(13, int((y + 1) / 2 * 200 + 50))
elif varDict['mode'] == 2:
millis = int(round(time.time() * 1000))
if millis - lastUpdate > 500:
lastUpdate = millis
x = random.randrange(50, 250)
y = random.randrange(50, 250)
wiringpi.pwmWrite(18, int(x))
def moveServo(self, lower, upper, step): for pulse in range(lower, upper, step): wiringpi.pwmWrite(18, pulse) time.sleep(self.delay_period)
SPIMISO = 9
SPICS = 8
# SPI通信用の入出力を定義
GPIO.setup(SPICLK, GPIO.OUT)
GPIO.setup(SPIMOSI, GPIO.OUT)
GPIO.setup(SPIMISO, GPIO.IN)
GPIO.setup(SPICS, GPIO.OUT)
wiringpi.wiringPiSetupGpio() # GPIO名で番号を指定する
wiringpi.pinMode(18, wiringpi.GPIO.PWM_OUTPUT) # PWM出力を指定
wiringpi.pinMode(19, wiringpi.GPIO.PWM_OUTPUT) # PWM出力を指定
wiringpi.pwmSetMode(wiringpi.GPIO.PWM_MODE_MS) # 周波数を固定するための設定
wiringpi.pwmSetClock(375) # 50 Hz。ここには 18750/(周波数) の計算値に近い整数を入れる
# PWMのピン番号18とデフォルトのパルス幅をデューティ100%を1024として指定。
# ここでは6.75%に対応する69を指定
wiringpi.pwmWrite(18, 69)
wiringpi.pwmWrite(19, 69)
adc_pin0 = 0
adc_pin1 = 1
try:
while True:
inputVal0 = readadc(adc_pin0, SPICLK, SPIMOSI, SPIMISO, SPICS)
duty0 = servo_duty_hwpwm(inputVal0)
wiringpi.pwmWrite(18, duty0)
inputVal1 = readadc(adc_pin1, SPICLK, SPIMOSI, SPIMISO, SPICS)
duty1 = servo_duty_hwpwm(inputVal1)
wiringpi.pwmWrite(19, duty1)
sleep(0.2)
def down_slow(self):
'''Moves the hook down slowly.'''
wp.digitalWrite(DIR_PIN, 0)
wp.pwmWrite(PWM_PIN, 1023)
Motor2PWM = 23 # gpio pin 33 = wiringpi no. 23 (BCM 13) Motor2BIN1 = 21 # gpio pin 29 = wiringpi no. 21 (BCM 5) Motor2BIN2 = 22 # gpio pin 31 = wiringpi no. 22 (BCM 6) # Initialize PWM output wiringpi.wiringPiSetup() wiringpi.pinMode(Motor1PWM, 2) # PWM mode wiringpi.pinMode(Motor1AIN1, 1) #Digital out mode wiringpi.pinMode(Motor1AIN2, 1) #Digital out mode wiringpi.pinMode(MotorStandby, 1) #Ditial out mode wiringpi.pinMode(Motor2PWM, 2) # PWM mode wiringpi.pinMode(Motor2BIN1, 1) #Digital out mode wiringpi.pinMode(Motor2BIN2, 1) #Digital out mode wiringpi.pwmWrite(Motor1PWM, 0) # OFF wiringpi.pwmWrite(Motor2PWM, 0) # OFF wiringpi.digitalWrite(Motor1AIN1, 1) #forward mode wiringpi.digitalWrite(Motor1AIN2, 0) #forward mode wiringpi.digitalWrite(Motor2BIN1, 1) wiringpi.digitalWrite(Motor2BIN2, 0) wiringpi.digitalWrite(MotorStandby, 1) #enabled # Initialise SPI stuff spi = spidev.SpiDev() spi.open(0, 0) #SPI bus 0, device 0 spi.max_speed_hz = 1000000 #max speed of 1MHz # Set Motor Speed def motorspeed(speed1, speed2):
def stop(self):
'''Stops the hook dead.'''
wp.digitalWrite(DIR_PIN, 0)
wp.pwmWrite(PWM_PIN, 0)
import wiringpi as wpi
pin = 18
wpi.wiringPiSetupGpio()
wpi.pinMode(pin, wpi.OUTPUT)
wpi.pwmSetClock(1920)
wpi.pwmSetRange(1000)
while True:
for i in range(0, 1001):
wpi.pwmWrite(pin, i)
wpi.delay(1)
for i in range(1000, -1, -1):
wpi.pwmWrite(pin, i)
wpi.delay(1)
PWMは、以下の式で成り立つ
[PWM周波数] = 19.2MHz / [Clock] / [Range]
[Duty比] = [Duty] / [Range]
wiringpiでは、[Range] = 1024で固定し、[Clock]と[Duty]
の2つのパラメータでPWMを制御する
[Range] = 1024
[PWM周波数] = 18750 / [Clock]
[Duty比] = [Duty] / 1024
"""
range = 1024
duty_ratio = pulse / interval
hz = 1 / (interval * 0.001)
clock = int(18750 / hz)
duty = int(duty_ratio * range)
print("pin = ", pwm_pin, " interval[ms] = ", interval, " pulse[ms] = ", pulse)
print("clock = ", clock, " duty=", duty, " duty_ratio=", duty_ratio)
# 初期設定
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(pwm_pin, wiringpi.GPIO.PWM_OUTPUT)
wiringpi.pwmSetMode(wiringpi.GPIO.PWM_MODE_MS)
# ClockとDutyを設定してPWMを生成する
wiringpi.pwmSetClock(clock)
wiringpi.pwmWrite(pwm_pin, duty)
import wiringpi
import time
import sys
servo_pin = 18
param = sys.argv
set_degree = int(param[1])
print(set_degree)
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(servo_pin, 2)
wiringpi.pwmSetMode(0)
wiringpi.pwmSetRange(1024)
wiringpi.pwmSetClock(375)
if (set_degree <= 90 and set_degree >= -90):
move_deg = int(81 + 41 / 90 * set_degree)
wiringpi.pwmWrite(servo_pin, move_deg)
def GoDimPWM(level): # This version of hw uses the real hw pwm for screen dimming - much better appearance wiringpi.pwmWrite(dimpin, int((level * 1024) // 100))
def up_slow(self):
'''Moves the hook up slowly.'''
wp.digitalWrite(DIR_PIN, 1)
wp.pwmWrite(PWM_PIN, 1024)
#Adam Corbin 7/31/2017
#This module is used to communicate to any device over bluetooth.
#For testing purposes using an Android app here:
#Your android device needs to be paired with the RPi before you can send commands
fadingLED = False
blinking = False
valueOn = 0
valueOff = 1024
wiringpi.wiringPiSetup()
ledPin = 1 #This pin maps to RasPi3 GPIO 18 which is the PWM pin
#We need to ensure that the pin mode has been set to PWM so we can fade the led
wiringpi.pinMode(ledPin, wiringpi.PWM_OUTPUT)
wiringpi.pwmWrite(ledPin, valueOn)
server_sock = BluetoothSocket(RFCOMM)
server_sock.bind(("", PORT_ANY))
server_sock.listen(1)
port = server_sock.getsockname()[1]
uuid = "94f39d29-7d6d-437d-973b-fba39e49d4ee" #This is the UUID that needs to map the the Android SerialPortService ID
#This sets up the bluetooh module what to look for
advertise_service(
server_sock,
"PiServer",
service_id=uuid,
service_classes=[uuid, SERIAL_PORT_CLASS],
import time
import wiringpi
servoPin = 21
wiringpi.wiringPiSetupGpio()
wiringpi.pinMode(servoPin, wiringpi.GPIO.PWM_OUTPUT)
wiringpi.pwmSetMode(wiringpi.GPIO.PWM_MODE_MS)
wiringpi.pwmSetClock(192)
wiringpi.pwmSetRange(2000)
delay_period = 0.01
while True:
for pulse in range(50,250,1):
wiringpi.pwmWrite(servoPin, pulse)
time.sleep(delay_period)
for pulse in range(250, 50, -1):
wiringpi.pwmWrite(servoPin, pulse)
time.sleep(delay_period)
def callback(data):
wp.pwmWrite(ENA, 120 + data)
wp.pwmWrite(ENB, 120 - data)
def calcNewDC(dc):
# Calculate duty cycle on correct scale from percentage scale
return int(50 + 0.35 * dc)
try:
# Setup functions
gpioSetup()
fileInitialization()
# Client name
clientName = "RPILamp"
# Server IP
serverAddress = "localhost"
# Client instantiation
mqttClient = mqtt.Client(clientName)
mqttClient.on_connect = connectionStatus
mqttClient.on_message = messageDecoder
mqttClient.connect(serverAddress)
# Monitoring for the Terminal
mqttClient.loop_forever()
except KeyboardInterrupt:
mqttClient.disconnect()
finally:
wiringpi.pwmWrite(1, 0)
f.close()
# Look for faces in the image using the loaded cascade file
faces = faceCascade.detectMultiScale(gray, 1.2, 5)
if len(faces) > 0:
for (x, y, w, h) in faces:
# Create rectangle around faces
cv2.rectangle(image, (x, y), (x + w, y + h), (255, 255, 0), 2)
# Create the resizeable window
cv2.namedWindow('Kitty', cv2.WINDOW_NORMAL)
# Display the image
cv2.imshow('Kitty', image)
delay_period = 0.01
for pulse in range(50, 250, 1):
wiringpi.pwmWrite(18, pulse)
time.sleep(delay_period)
for pulse in range(250, 50, -1):
wiringpi.pwmWrite(18, pulse)
time.sleep(delay_period)
sleep(30)
#close window and delete picture
sleep(5)
GPIO.cleanup()
elif monitorBtn.is_pressed:
toggleState()
elif wifiBtn.is_pressed:
wifiToggle()
elif bluetoothBtn.is_pressed:
bluetoothToggle()
elif cheatBtn.is_pressed:
showCheat()
# Initial File Setup
try:
comboStates = readData(statePath)
wiringpi.wiringPiSetup()
wiringpi.pinMode(led, 2)
wiringpi.pwmWrite(led, comboStates['brightness'])
os.system("amixer sset -q 'PCM' " + str(comboStates['volume']) + "%")
if comboStates['wifi'] == 1:
os.system("sudo rfkill unblock wifi")
else:
os.system("sudo rfkill block wifi")
if comboStates['bluetooth'] == 1:
os.system("sudo rfkill unblock bluetooth")
else:
os.system("sudo rfkill block bluetooth")
except:
writeData(statePath)
wiringpi.wiringPiSetup()
wiringpi.pinMode(led, 2)
wiringpi.pwmWrite(led, comboStates['brightness'])
os.system("amixer sset -q 'PCM' " + str(comboStates['volume']) + "%")
def messageDecoder(client, userdata, msg):
message = msg.payload.decode(encoding='UTF-8')
# Debugging prints included in the following
#print(message)
# Access global variables
global dc
global state
global maxLight
global nightMode
global measurements
# Change lamp state
if "on" in message:
print("Lamp state switched to: ON")
printTime("ON")
wiringpi.pwmWrite(1, calcNewDC(dc)) # Return to previous duty
# cycle on correct scale
state = True
elif "off" in message:
print("Lamp state switched to: OFF")
printTime("OFF")
wiringpi.pwmWrite(1, 0) # Turn duty cycle to 0%
state = False
elif "dc" in message:
dc = int(message[3:len(message)])
#print("Lamp duty cycle switched to: " + str(dc) + "%")
if (dc == 0):
wiringpi.pwmWrite(1, 0)
else:
wiringpi.pwmWrite(1, calcNewDC(dc))
print(calcNewDC(dc))
if state:
printTime("ON")
else:
printTime("OFF")
elif "light" in message:
if nightMode and state:
# Move former five measurements saved in array
for i in range(len(measurements) - 2, -1, -1):
measurements[i + 1] = measurements[i]
data = int(message[6:len(message)])
measurements[0] = data
if data > maxLight:
maxLight = data
# Calculate new duty cycle from average of last five
# measurements saved in array
measAvg = sum(measurements) / float(len(measurements))
if (data <= int(measAvg) + 50 and data >= int(measAvg) - 50):
offset = measAvg / maxLight
newDC = int(50 + offset * 35)
if (newDC > dc):
dc += 1
wiringpi.pwmWrite(1, dc)
elif (newDC < dc):
dc -= 1
wiringpi.pwmWrite(1, dc)
mqttClient.publish("rpi/back", str((dc - 50) / 0.35))
elif "night" in message:
nightMode = True
print("Night mode activated")
printTime("NIGHT")
elif "day" in message:
nightMode = False
print("Night mode deactivated")
printTime("DAY")
else:
print("Unknown message!")
import wiringpi as wPi
from time import sleep
pin = 18
wPi.wiringPiSetupGpio()
wPi.pinMode(pin, 2)
try:
for i in range(50):
print(i)
for j in range(0, 1024):
wPi.pwmWrite(pin, j)
sleep(0.0005)
for j in range(0, 1024):
wPi.pwmWrite(pin, 1024-j)
sleep(0.0005)
except KeyboardInterrupt:
print("killing")
wPi.pwmWrite(pin, 0)
wPi.pinMode(pin, 0)
def lock():
wiringpi.pwmWrite(lockpin, 55)
