def __init__(self, opts):
super(MySystem, self).__init__()
self._opts = opts
self.clk_domain = SrcClockDomain()
self.clk_domain.clock = '3GHz'
self.clk_domain.voltage_domain = VoltageDomain()
mem_size = '3GB'
self.mem_ranges = [
AddrRange(mem_size),
AddrRange(0xC0000000, size=0x100000),
]
self.membus = SystemXBar()
self.membus.badaddr_responder = BadAddr()
self.membus.default = self.membus.badaddr_responder.pio
self.system_port = self.membus.slave
x86.init_fs(self, self.membus)
self.kernel = '/dist/m5/system/binaries/x86_64-vmlinux-2.6.22.9'
boot_options = [
'earlyprintk = ttyS0', 'console=ttyS0', 'lpj=7999923',
'root=/dev/hda1'
]
self.boot_osflags = ' '.join(boot_options)
self.setDiskImage('/dist/m5/system/disks/linux-x86.img')
self.createCPU()
self.createCacheHierarchy()
#self.setupInterrupts()
self.createMemoryControllers()
def __init__(self, opts):
super(MySystem, self).__init__()
self._opts = opts
np = int(opts.n) # number of processors stored in np
# Set up the clock domain and the voltage domain
self.clk_domain = SrcClockDomain()
self.clk_domain.clock = '3GHz'
self.clk_domain.voltage_domain = VoltageDomain()
# For x86, there is an I/O gap from 3GB to 4GB.
# We can have at most 3GB of memory unless we do something special
# to account for this I/O gap. For simplicity, this is omitted.
mem_size = '512MB'
self.mem_ranges = [
AddrRange(mem_size),
AddrRange(0xC0000000, size=0x100000), # For I/0
]
# Create the main memory bus
# This connects to main memory
self.membus = SystemXBar()
self.membus.badaddr_responder = BadAddr()
self.membus.default = self.membus.badaddr_responder.pio
# Set up the system port for functional access from the simulator
self.system_port = self.membus.slave
# This will initialize most of the x86-specific system parameters
# This includes things like the I/O, multiprocessor support, BIOS...
x86.init_fs(self, self.membus, np)
# Change this path to point to the kernel you want to use
# Kernel from http://www.m5sim.org/dist/current/x86/x86-system.tar.bz2
self.kernel = '../temp/old/CS757/binaries/x86_64-vmlinux-2.6.22.9'
#self.kernel = '../temp/linux-bigswap2.img'
# Options specified on the kernel command line
boot_options = [
'earlyprintk=ttyS0', 'console=ttyS0', 'lpj=7999923',
'root=/dev/hda1'
]
self.boot_osflags = ' '.join(boot_options)
# Replace these paths with the path to your disk images.
# The first disk is the root disk. The second could be used for swap
# or anything else.
# Disks from http://www.m5sim.org/dist/current/x86/x86-system.tar.bz2
self.setDiskImage('../temp/x86root.img')
# Create the CPU for our system.
self.createCPU()
# Create the cache heirarchy for the system.
self.createCacheHierarchy()
# Create the memory controller for the sytem
self.createMemoryControllers()
# Set up the interrupt controllers for the system (x86 specific)
self.setupInterrupts()
def __init__(self, opts):
super(MySystem, self).__init__()
self._opts = opts
np= int(opts.n) # number of processors stored in np
# Set up the clock domain and the voltage domain
self.clk_domain = SrcClockDomain()
self.clk_domain.clock = '3GHz'
self.clk_domain.voltage_domain = VoltageDomain()
# For x86, there is an I/O gap from 3GB to 4GB.
# We can have at most 3GB of memory unless we do something special
# to account for this I/O gap. For simplicity, this is omitted.
mem_size = '512MB'
self.mem_ranges = [AddrRange(mem_size),
AddrRange(0xC0000000, size=0x100000), # For I/0
]
# Create the main memory bus
# This connects to main memory
self.membus = SystemXBar()
self.membus.badaddr_responder = BadAddr()
self.membus.default = self.membus.badaddr_responder.pio
# Set up the system port for functional access from the simulator
self.system_port = self.membus.slave
# This will initialize most of the x86-specific system parameters
# This includes things like the I/O, multiprocessor support, BIOS...
x86.init_fs(self, self.membus, np)
# Change this path to point to the kernel you want to use
# Kernel from http://www.m5sim.org/dist/current/x86/x86-system.tar.bz2
self.kernel = '../temp/old/CS757/binaries/x86_64-vmlinux-2.6.22.9'
#self.kernel = '../temp/linux-bigswap2.img'
# Options specified on the kernel command line
boot_options = ['earlyprintk=ttyS0', 'console=ttyS0', 'lpj=7999923',
'root=/dev/hda1']
self.boot_osflags = ' '.join(boot_options)
# Replace these paths with the path to your disk images.
# The first disk is the root disk. The second could be used for swap
# or anything else.
# Disks from http://www.m5sim.org/dist/current/x86/x86-system.tar.bz2
self.setDiskImage('../temp/x86root.img')
# Create the CPU for our system.
self.createCPU()
# Create the cache heirarchy for the system.
self.createCacheHierarchy()
# Create the memory controller for the sytem
self.createMemoryControllers()
# Set up the interrupt controllers for the system (x86 specific)
self.setupInterrupts()
def __init__(self, opts):
super(MySystem, self).__init__()
self._opts = opts
self.clk_domain = SrcClockDomain()
self.clk_domain.clock = '3GHz'
self.clk_domain.voltage_domain = VoltageDomain()
mem_size = '3GB'
self.mem_ranges = [AddrRange(mem_size),
AddrRange(0xC0000000, size=0x200000) # PCIe and I/O ////////
]
self.membus = SystemXBar()
self.membus.badaddr_responder = BadAddr()
self.membus.default = self.membus.badaddr_responder.pio
self.system_port = self.membus.slave
# initialize x86 system
x86.init_fs(self, self.membus)
self.kernel = '/root/images/baseTDNN/vmlinux-5.2.3'
#self.kernel = '/root/Gem5-PCI-Express/vmlinux' # only works for ARM system I think
boot_options = ['earlyprintk=ttyS0', 'console=ttyS0', 'lpj=7999923', 'root=/dev/hda1']
self.boot_osflags = ' '.join(boot_options)
self.setDiskImage('/root/images/miniDNN/linux-x86.img')
self.createCPU()
self.createCacheHierarchy()
self.createMemoryControllers()
self.setupInterrupts()
