def setUp(self):
"""
Prepare a fake device to read from
"""
super(TestSendShorthand, self).setUp()
self.ser = Serial()
self.xbee = XBee(self.ser)
def setUp(self):
"""
Initialize XBee object
"""
super(InitXBee, self).setUp()
self._patch_io = ioloop.IOLoop.current()
self._patch_io.add_handler = Mock()
serial_port = Serial()
self.xbee = XBee(serial_port, io_loop=self._patch_io)
def test_read_invalid_followed_by_valid(self):
"""
_wait_for_frame should skip invalid data
"""
device = Serial()
device.set_read_data(b'\x7E\x00\x01\x00\xFA' + b'\x7E\x00\x01\x05\xFA')
xbee = XBeeBase(device)
frame = xbee._wait_for_frame()
self.assertEqual(frame.data, b'\x05')
def test_read(self):
"""
_wait_for_frame should properly read a frame of data
"""
device = Serial()
device.set_read_data(b'\x7E\x00\x01\x00\xFF')
xbee = XBeeBase(device)
frame = xbee._wait_for_frame()
self.assertEqual(frame.data, b'\x00')
def test_send(self):
"""
Test send() with AT command.
"""
device = Serial()
xbee = ZigBee(device)
xbee.send('at', command='MY')
result = device.get_data_written()
expected = b'~\x00\x04\x08\x01MYP'
self.assertEqual(result, expected)
def test_read(self):
"""
_wait_for_frame should properly read a frame of data
"""
device = Serial()
device.set_read_data(b'\x7E\x00\x01\x00\xFF')
xbee = XBeeBase(device, io_loop=self._patch_io)
xbee._process_input(None, None)
frame = yield xbee._get_frame()
self.assertEqual(frame.data, b'\x00')
def test_read_escaped(self):
"""
_wait_for_frame should properly read a frame of data
Verify that API mode 2 escaped bytes are read correctly
"""
device = Serial()
device.set_read_data(b'\x7E\x00\x04\x7D\x5E\x7D\x5D\x7D\x31\x7D\x33\xE0')
xbee = XBeeBase(device,escaped=True)
frame = xbee._wait_for_frame()
self.assertEqual(frame.data, b'\x7E\x7D\x11\x13')
def test_read_invalid_followed_by_valid(self):
"""
_wait_for_frame should skip invalid data
"""
device = Serial()
device.set_read_data(b'\x7E\x00\x01\x00\xFA' + b'\x7E\x00\x01\x05\xFA')
xbee = XBeeBase(device, io_loop=self._patch_io)
xbee._process_input(None, None)
# First process ends with no good frame, process next
xbee._process_input(None, None)
frame = yield xbee._get_frame()
self.assertEqual(frame.data, b'\x05')
def test_write_again(self):
"""
_write method should write the expected data to the serial
device
"""
device = Serial()
xbee = XBeeBase(device)
xbee._write(b'\x00\x01\x02')
# Check resuting state of fake device
expected_frame = b'\x7E\x00\x03\x00\x01\x02\xFC'
result_frame = device.get_data_written()
self.assertEqual(result_frame, expected_frame)
def test_write_escaped(self):
"""
_write method should write the expected data to the serial
device
"""
device = Serial()
xbee = XBeeBase(device,escaped=True)
xbee._write(b'\x7E\x01\x7D\x11\x13')
# Check resuting state of fake device
expected_frame = b'\x7E\x00\x05\x7D\x5E\x01\x7D\x5D\x7D\x31\x7D\x33\xDF'
result_frame = device.get_data_written()
self.assertEqual(result_frame, expected_frame)
def test_read_at(self):
"""
read and parse a parameterless AT command
"""
device = Serial()
device.set_read_data(b'\x7E\x00\x05\x88DMY\x01\x8c')
xbee = XBee(device)
info = xbee.wait_read_frame()
expected_info = {
'id': 'at_response',
'frame_id': b'D',
'command': b'MY',
'status': b'\x01'
}
self.assertEqual(info, expected_info)
def test_read_at_params_in_escaped_mode(self):
"""
read and parse an AT command with a parameter in escaped API mode
"""
device = Serial()
device.set_read_data(b'~\x00\t\x88DMY\x01}^}]}1}3m')
xbee = XBee(device, escaped=True)
info = xbee.wait_read_frame()
expected_info = {
'id': 'at_response',
'frame_id': b'D',
'command': b'MY',
'status': b'\x01',
'parameter': b'\x7E\x7D\x11\x13'
}
self.assertEqual(info, expected_info)
def test_is_remote_response_parsed_as_io(self):
"""
I/O data in a Remote AT response for an IS command is parsed.
"""
# Build IO data
# One sample, ADC 0 enabled
# DIO 1,3,5,7 enabled
header = b'\x01\x02\xAA'
# First 7 bits ignored, DIO8 low, DIO 0-7 alternating
# ADC0 value of 255
sample = b'\x00\xAA\x00\xFF'
data = header + sample
device = Serial()
device.set_read_data(
APIFrame(data=b'\x97D\x00\x13\xa2\x00@oG\xe4v\x1aIS\x00' +
data).output())
xbee = XBee(device)
xbee._process_input(None, None)
info = yield xbee.wait_read_frame()
expected_info = {
'id':
'remote_at_response',
'frame_id':
b'D',
'source_addr_long':
b'\x00\x13\xa2\x00@oG\xe4',
'source_addr':
b'v\x1a',
'command':
b'IS',
'status':
b'\x00',
'parameter': [{
'dio-1': True,
'dio-3': True,
'dio-5': True,
'dio-7': True,
'adc-0': 255
}]
}
self.assertEqual(info, expected_info)
def test_empty_frame_ignored(self):
"""
If an empty frame is received from a device, it must be ignored.
"""
device = Serial()
device.set_read_data(b'\x7E\x00\x00\xFF\x7E\x00\x05\x88DMY\x01\x8c')
xbee = XBee(device)
xbee._process_input(None, None)
xbee._process_input(None, None)
info = yield xbee.wait_read_frame()
expected_info = {
'id': 'at_response',
'frame_id': b'D',
'command': b'MY',
'status': b'\x01'
}
self.assertEqual(info, expected_info)
def test_read_at_params(self):
"""
read and parse an AT command with a parameter
"""
device = Serial()
device.set_read_data(b'\x7E\x00\x08\x88DMY\x01\x00\x00\x00\x8c')
xbee = XBee(device)
xbee._process_input(None, None)
info = yield xbee.wait_read_frame()
expected_info = {
'id': 'at_response',
'frame_id': b'D',
'command': b'MY',
'status': b'\x01',
'parameter': b'\x00\x00\x00'
}
self.assertEqual(info, expected_info)
def test_send_at_command(self):
"""
calling send should write a full API frame containing the
API AT command packet to the serial device.
"""
serial_port = Serial()
xbee = XBee(serial_port)
# Send an AT command
xbee.send('at',
frame_id=stringToBytes('A'),
command=stringToBytes('MY'))
# Expect a full packet to be written to the device
expected_data = b'\x7E\x00\x04\x08AMY\x10'
result_data = serial_port.get_data_written()
self.assertEqual(result_data, expected_data)
def test_read_rx_with_close_brace_escaped(self):
"""
An escaped rx data frame including a close brace must be read properly.
"""
device = Serial()
device.set_read_data(
APIFrame(b'\x81\x01\x02\x55\x00{test=1}', escaped=True).output())
xbee = XBee(device, escaped=True)
info = xbee.wait_read_frame()
expected_info = {
'id': 'rx',
'source_addr': b'\x01\x02',
'rssi': b'\x55',
'options': b'\x00',
'rf_data': b'{test=1}'
}
self.assertEqual(info, expected_info)
def test_read_rx_with_close_brace(self):
"""
An rx data frame including a close brace must be read properly.
"""
device = Serial()
device.set_read_data(
APIFrame(b'\x81\x01\x02\x55\x00{test=1}').output())
xbee = XBee(device, io_loop=self._patch_io)
xbee._process_input(None, None)
info = yield xbee.wait_read_frame()
expected_info = {
'id': 'rx',
'source_addr': b'\x01\x02',
'rssi': b'\x55',
'options': b'\x00',
'rf_data': b'{test=1}'
}
self.assertEqual(info, expected_info)
def test_read_io_data(self):
"""
XBee class should properly read and parse incoming IO data
"""
# Build IO data
# One sample, ADC 0 enabled
# DIO 1,3,5,7 enabled
header = b'\x01\x02\xAA'
# First 7 bits ignored, DIO8 low, DIO 0-7 alternating
# ADC0 value of 255
sample = b'\x00\xAA\x00\xFF'
data = header + sample
# Wrap data in frame
# RX frame data
rx_io_resp = b'\x83\x00\x01\x28\x00'
device = Serial()
device.set_read_data(b'\x7E\x00\x0C' + rx_io_resp + data + b'\xfd')
xbee = XBee(device)
xbee._process_input(None, None)
info = yield xbee.wait_read_frame()
expected_info = {
'id':
'rx_io_data',
'source_addr':
b'\x00\x01',
'rssi':
b'\x28',
'options':
b'\x00',
'samples': [{
'dio-1': True,
'dio-3': True,
'dio-5': True,
'dio-7': True,
'adc-0': 255
}]
}
self.assertEqual(info, expected_info)
def test_is_response_parsed_as_io(self):
"""
I/O data in a AT response for an IS command is parsed.
"""
## Build IO data
# One sample, ADC 0 enabled
# DIO 1,3,5,7 enabled
header = b'\x01\x02\xAA'
# First 7 bits ignored, DIO8 low, DIO 0-7 alternating
# ADC0 value of 255
sample = b'\x00\xAA\x00\xFF'
data = header + sample
device = Serial()
device.set_read_data(APIFrame(data=b'\x88DIS\x00' + data).output())
xbee = XBee(device)
info = xbee.wait_read_frame()
expected_info = {
'id':
'at_response',
'frame_id':
b'D',
'command':
b'IS',
'status':
b'\x00',
'parameter': [{
'dio-1': True,
'dio-3': True,
'dio-5': True,
'dio-7': True,
'adc-0': 255
}]
}
self.assertEqual(info, expected_info)
def setUp(self):
"""
Create a fake read device for each test.
"""
self.device = Serial()
self.device.set_read_data("test")
def setUp(self):
self.xbee = None
self.serial = Serial()
self.callback = lambda data: None
self.error_callback = lambda data: None
def setUp(self):
super(TestDigiMesh, self).setUp()
patch_io = ioloop.IOLoop.current()
patch_io.add_handler = Mock()
serial_port = Serial()
self.digimesh = DigiMesh(serial_port, io_loop=patch_io)
def setUp(self):
"""
Prepare a fake device to read from
"""
self.ser = Serial()
self.xbee = XBee(self.ser)
def setUp(self):
super(TestZigBee, self).setUp()
self._patch_io = ioloop.IOLoop.current()
self._patch_io.add_handler = Mock()
serial_port = Serial()
self.zigbee = ZigBee(serial_port, io_loop=self._patch_io)