def get_max_cl(Re, r):
"""
Analyze airfoil at a fixed Re,
changing aoa from 10 to 15 by 0.1
and returns cl, cd, aoa that makes maximum cl
"""
xf = XFoil()
if r <= 0.175:
xf.airfoil = naca6409
else:
xf.airfoil = naca2412
xf.Re = Re
xf.Re = Re
xf.max_iter = 200
xf.n_crit = 9.00
xf.xtr = [1.00, 1.00]
xf.M = 0
a_seq, cl_seq, cd_seq, cm_seq, cp_seq = xf.aseq(10, 15, 0.1)
# ignore nan by making it 0
cl_seq = np.nan_to_num(cl_seq)
# find the maximum cl
cl_maxi = np.max(cl_seq)
# index of the maximum cl
idx = np.argmax(cl_seq)
return round(cl_maxi, 2), round(a_seq[idx], 2), round(cd_seq[idx], 2)
def hello():
x = request.args.get('x')
y = request.args.get('y')
Re = float(request.args.get('Re'))
M = float(request.args.get('M'))
Alpha = float(request.args.get('Alpha'))
x = x.split()
y = y.split()
ctrlX = [float(ele) for ele in x]
ctrlY = [float(ele) for ele in y]
bezierX, bezierY = airfoil(ctrlX, ctrlY, 16)
xf = XFoil()
xf.Re = Re
xf.M = 0
xf.max_iter = 100
xf.airfoil = Airfoil(np.array(bezierX), np.array(bezierY))
aero = xf.a(Alpha)
xcp, cp = xf.get_cp_distribution()
y = savgol_filter(cp, 5, 2)
for i in range(30):
y = savgol_filter(y, 5, 2)
LD = aero[0] / aero[1]
vol = PolyArea(bezierX, bezierY)
print(len(xcp))
return jsonify(result=str(round(aero[0], 3)) + " " +
str(round(aero[1], 3)) + " " + str(round(aero[2], 3)) +
" " + str(round(LD, 2)) + " " + str(round(vol, 3)),
xcp=xcp.tolist(),
cp=y.tolist())
def cl_visc_analysis(airfoil, cl_i, cl_f, cl_step, re, mach, max_iter, id):
"""Viscous analysis over range of lift coefficients."""
# Initializes airfoil and assigns NACA
xf = XFoil()
xf.naca(airfoil)
xf.max_iter = max_iter
xf.Re = re
xf.M = mach
# Collects values
a, cl, cd, cm, cp = xf.cseq(cl_i, cl_f, cl_step)
x, cp_0 = xf.get_cp_distribution()
# Plots all the data
plot(a, cl, cd, cm, cp, x, cp_0, id)
def alpha_visc_analysis(airfoil, alpha_i, alpha_f, alpha_step, re, mach,
max_iter, id):
"""Viscous analysis over range of angle of attacks."""
# Initializes airfoil and assigns NACA
xf = XFoil()
xf.naca(airfoil)
xf.max_iter = max_iter
xf.Re = re
xf.M = mach
# Collects values
a, cl, cd, cm, cp = xf.aseq(alpha_i, alpha_f, alpha_step)
x, cp_0 = xf.get_cp_distribution()
# Plots all the data
plot(a, cl, cd, cm, cp, x, cp_0, id)
def get_torque(angular_velocity):
torque_sum_small = 0
torque_sum_large = 0
w = angular_velocity
for key, value in dfdict.items():
value["blade_velocity"] = value['r_position'] * w
value["relative_velocity"] = round(
math.sqrt(value["blade_velocity"]**2 + value["wind_velocity"]**2),
2)
value["arctan"] = math.degrees(
math.atan2(value["wind_velocity"], value["blade_velocity"]))
aoa = round(value["arctan"] - value["pitch_angle"], 2)
value["angle_of_attack"] = aoa
re_n = round(
value["relative_velocity"] * value["chord_length"] / 0.00001511, 3)
value["Reynolds_number"] = re_n
xf = XFoil()
if key < 13:
xf.airfoil = naca6409
else:
xf.airfoil = naca2412
xf.Re = re_n
xf.max_iter = 100
xf.n_crit = 9.00
xf.xtr = [1.00, 1.00]
xf.M = 0
value["Cl"], value["Cd"], value["Cm"], value["Cp"] = xf.a(aoa)
force_reference = 0.5 * density * value["relative_velocity"]**2
if math.isnan(value["Cl"]):
value["torque"] = 0
else:
lift = value["Cl"] * force_reference * 0.0125 * value[
'chord_length']
drag = value["Cd"] * force_reference * 0.0125 * value[
'chord_length']
value["torque"] = value["r_position"] * (
lift * math.sin(math.radians(value["pitch_angle"])) -
drag * math.cos(math.radians(value["pitch_angle"])))
if key < 13:
torque_sum_small += value["torque"]
else:
pass
if key > 0:
torque_sum_large += value["torque"]
else:
pass
df2 = pd.DataFrame.from_dict(dfdict, orient="index")
df_collection.append(df2)
torque_sum_avg = 0.5 * (torque_sum_small + torque_sum_large)
return torque_sum_avg
def total_dict(angular_velocity):
torque_sum = 0
w = angular_velocity
for key, value in dfdict.items():
value["blade_velocity"] = value['r_position'] * w
value["relative_velocity"] = round(
math.sqrt(value["blade_velocity"]**2 + value["wind_velocity"]**2),
2)
value["arctan"] = math.degrees(
math.atan2(value["wind_velocity"], value["blade_velocity"]))
aoa = round(value["arctan"] - value["pitch_angle"], 1)
value["angle_of_attack"] = aoa
re_n = round(value["relative_velocity"] * value["chord_length"] /
0.00001511)
value["Reynolds_number"] = re_n
xf = XFoil()
if key < 13:
xf.airfoil = naca6409
else:
xf.airfoil = naca2412
xf.Re = round(re_n / 100) * 100
xf.max_iter = 200
xf.n_crit = 9.00
xf.xtr = [1.00, 1.00]
xf.M = 0
c_l, c_d, c_m, c_p = xf.a(aoa)
force_reference = 0.5 * density * value["relative_velocity"]**2
if math.isnan(c_l):
pass
else:
value["Cl"] = c_l
value["Cd"] = c_d
value["Cm"] = c_m
value["Cp"] = c_p
lift = c_l * force_reference * 0.0125 * value['chord_length']
drag = c_d * force_reference * 0.0125 * value['chord_length']
value["lift"] = lift
value["drag"] = drag
# value["torque"] = value["r_position"] * lift * math.sin(math.radians(value["pitch_angle"]))
torque = value["r_position"] * (
lift * math.sin(math.radians(value["pitch_angle"])) -
drag * math.cos(math.radians(value["pitch_angle"])))
value["torque"] = torque
torque_sum += torque
xf.reset_bls()
# detailed_df = pd.DataFrame.from_dict(dfdict, orient="index")
# print(detailed_df)
print(torque_sum, angular_velocity)
return dfdict, torque_sum
c = (a_max * 8 * pi * r * math.sin(phi) ** 2) / ((1 - a_max) * prop_blades * c_l * math.cos(phi))
re = (v_r * c) / (nu_mars)
# XFOIL #######
from xfoil import XFoil
xf = XFoil()
# Import an airfoil
from xfoil.test import XXXXX
xf.airfoil = XXXXX
# Setting up the analysis parameters
xf.Re = re
xf.max_iter = 100
xf.M = 0.7
# Obtaining the angle of attack, lift coefficient, drag coefficient and momentum coefficient of the airfoil
a, cl, cd, cm = xf.aseq(0, 30, 0.5)
def analyze_airfoil(x,
y_u,
y_l,
cl,
rey,
mach=0,
xf=None,
pool=None,
show_output=False):
"""
Analyze an airfoil at a given lift coefficient for given Reynolds and Mach numbers using XFoil.
Parameters
----------
x : array_like
Airfoil x-coordinates
y_u, y_l : array_like
Airfoil upper and lower curve y-coordinates
cl : float
Target lift coefficient
rey, mach : float
Reynolds and Mach numbers
xf : XFoil, optional
An instance of the XFoil class to use to perform the analysis. Will be created if not given
pool : multiprocessing.ThreadPool, optional
An instance of the multiprocessing.Threadpool class used to run the xfoil_worker. Will be created if not given
show_output : bool, optional
If True, a debug string will be printed after analyses. False by default.
Returns
-------
cd, cm : float or np.nan
Drag and moment coefficients of the airfoil at specified conditions, or nan if XFoil did not run successfully
"""
# If the lower and upper curves swap, this is a bad, self-intersecting airfoil. Return 1e27 immediately.
if np.any(y_l > y_u):
return np.nan
else:
clean_xf = False
if xf is None:
xf = XFoil()
xf.print = show_output
clean_xf = True
clean_pool = False
if pool is None:
pool = ThreadPool(processes=1)
clean_pool = True
xf.airfoil = Airfoil(x=np.concatenate((x[-1:0:-1], x)),
y=np.concatenate((y_u[-1:0:-1], y_l)))
xf.Re = rey
xf.M = mach
xf.max_iter = 100
xf.n_crit = 0.1
cd, cm = pool.apply(xfoil_worker, args=(xf, cl))
if clean_xf:
del xf
if clean_pool:
del pool
return cd, cm, None if clean_xf else xf
#!/usr/bin/python3
from xfoil import XFoil
import matplotlib.pyplot as plt
xf = XFoil()
xf.load("revclarky.dat")
xf.Re = 1e5
xf.M = 0
xf.max_iter = 100
a, cl, cd, cm, cp = xf.aseq(-2, 2, 0.5)
plt.plot(a, cl)
plt.title("alfa vs cl")
plt.show()
#plt.plot(xf.airfoil.x,xf.airfoil.y)
#plt.axis('equal')
#plt.show()
y = np.concatenate((np.flip(yu[1:]), yl[1:]), axis=0)
foil = Airfoil(x, y)
#TODO: Xfoil
xf = XFoil()
xf.print = False
xf.max_iter = 40
xf.airfoil = foil
xf.xtr = [0.0, 0.0]
Minf = 0.2
AoA = 8.0
Re = 1e7
fname = 'feature-xfoil.txt'
xf.M = Minf
xf.Re = Re
cl, cd, cm, cp = xf.a(AoA)
x, cp = xf.get_cp_distribution()
with open(fname, 'w') as f:
f.write('%10s %15.6f \n'%('Minf', Minf))
f.write('%10s %15.6f \n'%('AoA', AoA))
f.write('%10s %15.6f \n'%('Re', Re/1e6))
f.write('%10s %15.6f \n'%('CL', cl))
f.write('%10s %15.6f \n'%('Cd', cd))
f.write('%10s %15.6f \n'%('Cm', cm))
fF = PhysicalXfoil(Minf, AoA, Re)
fF.setdata(x,y,cp)