def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
awg_id_to_wave_sequence = {}
for awg_id in awg_list:
# 波形の定義
wave_0 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SINE,
frequency=awg_to_freq[awg_id][0],
phase=0,
amplitude=30000,
num_cycles=int(2.5 *
awg_to_freq[awg_id][0])) #2.5us
wave_1 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SINE,
frequency=awg_to_freq[awg_id][1],
phase=0,
amplitude=30000,
num_cycles=int(2.5 *
awg_to_freq[awg_id][1])) #2.5us
# 波形シーケンスの定義
wave_sequence = (awgsa.WaveSequence(DAC_FREQ).add_step(
step_id=0, wave=wave_0, post_blank=0).add_step(step_id=1,
wave=wave_1,
post_blank=0))
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awg_id=awg_id,
wave_sequence=wave_sequence,
num_repeats=1000)
awg_id_to_wave_sequence[awg_id] = wave_sequence
return awg_id_to_wave_sequence
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
# 波形の定義
wave_0 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SAWTOOTH,
frequency=7.2,
phase=0,
amplitude=30000,
num_cycles=NUM_CYCLES)
wave_1 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SAWTOOTH,
frequency=11.0,
phase=0,
amplitude=30000,
num_cycles=NUM_CYCLES)
# 波形シーケンスの定義
wave_sequence_0 = (awgsa.WaveSequence(DAC_FREQ).add_step(step_id=0,
wave=wave_0,
post_blank=0))
wave_sequence_1 = (awgsa.WaveSequence(DAC_FREQ).add_step(step_id=0,
wave=wave_1,
post_blank=0))
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awg_id=awg_list[0],
wave_sequence=wave_sequence_0,
num_repeats=1)
awg_sa_cmd.set_wave_sequence(awg_id=awg_list[1],
wave_sequence=wave_sequence_1,
num_repeats=1)
return {awg_list[0]: wave_sequence_0, awg_list[1]: wave_sequence_1}
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
awg_id_to_wave_sequence = {}
for awg_id in awg_list:
# 波形の定義
wave_0 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SINE,
frequency=awg_to_freq[awg_id],
phase=0,
amplitude=30000,
num_cycles=awg_to_cycles[awg_id])
wave_1 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SAWTOOTH,
frequency=awg_to_freq[awg_id],
phase=0,
amplitude=30000,
num_cycles=awg_to_cycles[awg_id],
crest_pos=1.0)
# 波形シーケンスの定義
# 波形ステップの開始から終了までの期間は, キャプチャの終了処理にかかるオーバーヘッドを考慮し, 波形出力期間 + 2000 ns を設定する.
wave_sequence = (awgsa.WaveSequence(DAC_FREQ).add_step(
step_id=0, wave=wave_0, post_blank=2000).add_step(step_id=1,
wave=wave_1,
post_blank=2000))
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awg_id=awg_id,
wave_sequence=wave_sequence,
num_repeats=1000)
awg_id_to_wave_sequence[awg_id] = wave_sequence
return awg_id_to_wave_sequence
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
awg_id_to_wave_sequence = {}
for awg_id, freq in awg_to_freq.items():
wave_sequence = awgsa.WaveSequence(DAC_FREQ)
for step_id, cycles in enumerate(awg_to_cycles[awg_id]):
# 波形の定義
if (awg_to_trigger_mode[awg_id] == awgsa.TriggerMode.MANUAL):
wave = awgsa.AwgWave(
wave_type=awgsa.AwgWave.SQUARE, # トリガ波形は矩形波
frequency=freq,
phase=0.0,
amplitude=30000,
duty_cycle=100.0,
num_cycles=cycles)
else:
wave = awgsa.AwgWave(wave_type=awgsa.AwgWave.SINE,
frequency=freq,
phase=0,
amplitude=30000,
num_cycles=cycles)
# 波形シーケンスの定義
wave_sequence.add_step(step_id, wave, post_blank=185)
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awg_id, wave_sequence, num_repeats=1)
awg_id_to_wave_sequence[awg_id] = wave_sequence
return awg_id_to_wave_sequence
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
awg_to_wave_sequence = {}
for awg_id in awg_list:
# 波形の定義
freq = awg_to_freq[awg_id]
num_cycles_0 = awg_to_num_cycles[awg_id][0]
num_cycles_1 = awg_to_num_cycles[awg_id][1]
wave_0 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SINE,
frequency=freq,
num_cycles=num_cycles_0)
wave_1 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SINE,
frequency=freq,
num_cycles=num_cycles_1)
# 波形シーケンスの定義
# post_blank は, キャプチャの終了処理にかかるオーバーヘッドを考慮して設定する.
wave_sequence = (awgsa.WaveSequence(DAC_FREQ).add_step(
step_id=0, wave=wave_0,
post_blank=POST_BLANK).add_step(step_id=1,
wave=wave_1,
post_blank=POST_BLANK))
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awg_id=awg_id,
wave_sequence=wave_sequence,
num_repeats=10)
awg_to_wave_sequence[awg_id] = wave_sequence
return awg_to_wave_sequence
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
awg_id_to_wave_sequence = {}
for awg_id in awg_list:
# 波形の定義
num_cycles = int(6.0 * awg_to_freq[awg_id]) # 6.0[us]
i_wave = awgsa.AwgWave(
wave_type = awgsa.AwgWave.SINE,
frequency = awg_to_freq[awg_id],
phase = 90, # cos
amplitude = 15000,
num_cycles = num_cycles)
q_wave = awgsa.AwgWave(
wave_type = awgsa.AwgWave.SINE,
frequency = awg_to_freq[awg_id],
phase = 0,
amplitude = 15000,
num_cycles = num_cycles)
iq_wave = awgsa.AwgIQWave(i_wave, q_wave)
# 波形シーケンスの定義
# 波形ステップの開始から終了までの期間は, キャプチャの終了処理にかかるオーバーヘッドを考慮し, 波形出力期間 + 2000 ns を設定する.
wave_sequence = (awgsa.WaveSequence(DAC_FREQ, is_iq_data = True)
.add_step(step_id = 0, wave = iq_wave, post_blank = 2000))
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awg_id = awg_id, wave_sequence = wave_sequence, num_repeats = 1)
awg_id_to_wave_sequence[awg_id] = wave_sequence
return awg_id_to_wave_sequence
def set_wave_sequence(awg_sa_cmd, cycle_multiplier):
"""
波形シーケンスを AWG にセットする
"""
# 波形の定義
wave_0 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SINE,
frequency=10.0,
phase=0,
amplitude=30000,
num_cycles=4 * cycle_multiplier)
wave_1 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SAWTOOTH,
frequency=10.0,
phase=0,
amplitude=30000,
num_cycles=3 * cycle_multiplier,
crest_pos=1.0)
# 波形シーケンスの定義
# 波形ステップの開始から終了までの期間は, キャプチャの終了処理にかかるオーバーヘッドを考慮し, 波形出力期間 + 2000 ns を設定する.
wave_sequence_0 = (awgsa.WaveSequence(DAC_FREQ).add_step(
step_id=0, wave=wave_0, post_blank=2000).add_step(step_id=1,
wave=wave_1,
post_blank=2000))
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awgsa.AwgId.AWG_0,
wave_sequence_0,
num_repeats=1000)
return wave_sequence_0
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
# 波形の定義
wave_0 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SINE,
frequency=10.0,
phase=0,
amplitude=30000,
num_cycles=4)
wave_1 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SAWTOOTH,
frequency=10.0,
phase=0,
amplitude=30000,
num_cycles=3,
crest_pos=1.0)
wave_2 = awgsa.AwgWave(wave_type=awgsa.AwgWave.GAUSSIAN,
frequency=10.0,
phase=0,
amplitude=30000,
num_cycles=4,
variance=0.2,
domain_begin=-1.5,
domain_end=1.5)
wave_3 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SQUARE,
frequency=10.0,
phase=0,
amplitude=30000,
num_cycles=4,
duty_cycle=50.0)
# 波形シーケンスの定義
# 波形ステップの開始から終了までの期間は, キャプチャの終了処理にかかるオーバーヘッドを考慮し, 波形出力期間 + 2000 ns を設定する.
wave_sequence_0 = (awgsa.WaveSequence(DAC_FREQ).add_step(
step_id=0, wave=wave_0, post_blank=2000).add_step(step_id=1,
wave=wave_1,
post_blank=2000))
wave_sequence_1 = (awgsa.WaveSequence(DAC_FREQ).add_step(
step_id=0, wave=wave_2, post_blank=0).add_step(step_id=1,
wave=wave_3,
post_blank=2000))
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awg_id=awgsa.AwgId.AWG_0,
wave_sequence=wave_sequence_0,
num_repeats=1)
awg_sa_cmd.set_wave_sequence(awgsa.AwgId.AWG_1,
wave_sequence_1,
num_repeats=1)
return (wave_sequence_0, wave_sequence_1)
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
# 波形の定義
i_wave_0 = awgsa.AwgWave(
wave_type = awgsa.AwgWave.SINE,
frequency = 120.0,
phase = 0,
amplitude = 15000,
num_cycles = 2500)
q_wave_0 = awgsa.AwgWave(
wave_type = awgsa.AwgWave.SQUARE,
frequency = 120.0,
phase = 0,
amplitude = 15000,
duty_cycle = 100.0,
num_cycles = 2500)
iq_wave_0 = awgsa.AwgIQWave(i_wave_0, q_wave_0)
i_wave_1 = awgsa.AwgWave(
wave_type = awgsa.AwgWave.SINE,
frequency = 50.0,
phase = 90.0, # cos
amplitude = 15000,
duty_cycle = 100.0,
num_cycles = 2500)
q_wave_1 = awgsa.AwgWave(
wave_type = awgsa.AwgWave.SINE,
frequency = 50.0,
phase = 0,
amplitude = 15000,
num_cycles = 2500)
iq_wave_1 = awgsa.AwgIQWave(i_wave_1, q_wave_1)
# 波形シーケンスの作成
wave_sequence_0 = (awgsa.WaveSequence(DAC_FREQ, is_iq_data = True)
.add_step(step_id = 0, wave = iq_wave_0, post_blank = 2000))
wave_sequence_1 = (awgsa.WaveSequence(DAC_FREQ, is_iq_data = True)
.add_step(step_id = 0, wave = iq_wave_1, post_blank = 2000))
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awgsa.AwgId.AWG_0, wave_sequence_0)
awg_sa_cmd.set_wave_sequence(awgsa.AwgId.AWG_1, wave_sequence_1)
return (wave_sequence_0, wave_sequence_1)
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
awg_id_to_wave_sequence = {}
wave_type_list = (awgsa.AwgWave.SINE, awgsa.AwgWave.SQUARE,
awgsa.AwgWave.SAWTOOTH)
amp_list = (30000, -30000, 30000)
for awg_id in awg_list:
wave_sequence = awgsa.WaveSequence(DAC_FREQ)
for step_id in range(3):
# 波形の定義
wave = awgsa.AwgWave(wave_type=wave_type_list[step_id],
frequency=awg_to_freq[awg_id][step_id],
phase=0,
amplitude=amp_list[step_id],
num_cycles=awg_to_cycles[awg_id][step_id],
crest_pos=0.5)
# 波形シーケンスの定義
wave_sequence.add_step(step_id, wave, post_blank=0)
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awg_id=awg_id,
wave_sequence=wave_sequence,
num_repeats=1)
awg_id_to_wave_sequence[awg_id] = wave_sequence
return awg_id_to_wave_sequence
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
# 波形の定義
wave_0 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SINE,
frequency=10,
phase=0,
amplitude=30000,
num_cycles=INFINITE)
wave_1 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SQUARE,
frequency=10,
phase=0,
amplitude=30000,
num_cycles=3)
wave_2 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SAWTOOTH,
frequency=10,
phase=0,
amplitude=30000,
num_cycles=4)
# 波形シーケンスの定義
wave_sequence_0 = (awgsa.WaveSequence(DAC_FREQ).add_step(step_id=0,
wave=wave_0,
post_blank=0))
wave_sequence_1 = (awgsa.WaveSequence(DAC_FREQ).add_step(
step_id=0, wave=wave_1, post_blank=0).add_step(step_id=1,
wave=wave_2,
post_blank=POST_BLANK))
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awg_id=awg_list[0],
wave_sequence=wave_sequence_0,
num_repeats=1)
awg_sa_cmd.set_wave_sequence(awg_id=awg_list[1],
wave_sequence=wave_sequence_1,
num_repeats=INFINITE)
return {awg_list[0]: wave_sequence_0, awg_list[1]: wave_sequence_1}
def calibrate_adc(awg_sa_cmd):
"""
ADC をキャリブレーションする
"""
calib_wave = awgsa.AwgWave(
wave_type = awgsa.AwgWave.SINE,
frequency = 10.0,
phase = 0,
amplitude = 30000,
num_cycles = 100000)
calib_wave_sequence = (awgsa.WaveSequence(DAC_FREQ)
.add_step(step_id = 0, wave = calib_wave, post_blank = 0))
awg_sa_cmd.set_wave_sequence(awgsa.AwgId.AWG_0, calib_wave_sequence, num_repeats = 1)
awg_sa_cmd.start_wave_sequence()
wait_for_sequence_to_finish(awg_sa_cmd)
def calibrate_adc(awg_sa_cmd):
"""
ADC をキャリブレーションする
"""
# AWG に波形シーケンスをセットする
for awg_id in awg_list:
calib_wave = awgsa.AwgWave(
wave_type = awgsa.AwgWave.SINE,
frequency = awg_to_freq[awg_id],
phase = 0,
amplitude = 30000,
num_cycles = int(awg_to_freq[awg_id] * 1e4)) #10ms
calib_wave_sequence = (awgsa.WaveSequence(DAC_FREQ)
.add_step(step_id = 0, wave = calib_wave, post_blank = 0))
awg_sa_cmd.set_wave_sequence(awg_id, calib_wave_sequence, num_repeats = 1)
awg_sa_cmd.start_wave_sequence()
wait_for_sequence_to_finish(awg_sa_cmd, awg_list)
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
# 波形の定義
wave_0 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SINE,
frequency=80.0,
phase=0,
amplitude=-30000,
num_cycles=2200)
# 波形シーケンスの作成
wave_sequence_0 = (awgsa.WaveSequence(DAC_FREQ).add_step(step_id=0,
wave=wave_0,
post_blank=2000))
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awgsa.AwgId.AWG_0, wave_sequence_0)
return wave_sequence_0
def calibrate_adc(awg_sa_cmd):
"""
ADC をキャリブレーションする
"""
# AWG に波形シーケンスをセットする
for awg_id in awg_list:
calib_wave = awgsa.AwgWave(wave_type=awgsa.AwgWave.SINE,
frequency=10,
phase=0,
amplitude=30000,
num_cycles=int(1e5)) #10ms
calib_wave_sequence = (awgsa.WaveSequence(DAC_FREQ).add_step(
step_id=0, wave=calib_wave, post_blank=0))
awg_sa_cmd.set_wave_sequence(awg_id,
calib_wave_sequence,
num_repeats=1)
awg_sa_cmd.start_wave_sequence()
all_sequences_are_complete(awg_sa_cmd, *awg_list)
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
awg_id_to_wave_sequence = {}
for awg_id, freq in awg_to_freq.items():
wave_sequence = awgsa.WaveSequence(DAC_FREQ)
for step_id, cycles in enumerate(awg_to_cycles[awg_id]):
# 波形の定義
wave = awgsa.AwgWave(wave_type=awgsa.AwgWave.SINE,
frequency=freq,
phase=0,
amplitude=30000,
num_cycles=cycles)
# 波形シーケンスの定義
wave_sequence.add_step(step_id, wave, post_blank=200)
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awg_id, wave_sequence, num_repeats=1)
awg_id_to_wave_sequence[awg_id] = wave_sequence
return awg_id_to_wave_sequence
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
wave_0 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SINE,
frequency=10.0,
phase=0,
amplitude=20000,
num_cycles=3)
wave_1 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SAWTOOTH,
frequency=15.0,
phase=0.0,
amplitude=10000,
offset=0,
crest_pos=0.5,
num_cycles=3)
wave_2 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SQUARE,
frequency=10.0,
phase=0.0,
amplitude=10000,
offset=0,
duty_cycle=50.0,
num_cycles=3)
wave_3 = awgsa.AwgWave(wave_type=awgsa.AwgWave.GAUSSIAN,
frequency=10.0,
phase=0.0,
amplitude=8000,
offset=0,
domain_begin=-4.0,
domain_end=4.0,
variance=0.2,
num_cycles=2)
wave_4 = awgsa.AwgIQWave(wave_0, wave_1)
wave_5 = awgsa.AwgIQWave(wave_1, wave_2)
wave_6 = awgsa.AwgIQWave(wave_2, wave_0)
wave_sequence_0 = (awgsa.WaveSequence(DAC_FREQ).add_step(
step_id=0, wave=wave_0, post_blank=2000).add_step(
step_id=1, wave=wave_1,
post_blank=1500).add_step(step_id=2, wave=wave_2,
post_blank=0).add_step(step_id=3,
wave=wave_3,
post_blank=3000))
wave_sequence_1 = (awgsa.WaveSequence(DAC_FREQ, is_iq_data=True).add_step(
step_id=0, wave=wave_4,
post_blank=1000).add_step(step_id=1, wave=wave_5,
post_blank=2000).add_step(step_id=2,
wave=wave_6,
post_blank=1500))
awg_sa_cmd.set_wave_sequence(awgsa.AwgId.AWG_0,
wave_sequence_0,
num_repeats=1)
awg_sa_cmd.set_wave_sequence(awgsa.AwgId.AWG_1,
wave_sequence_1,
num_repeats=1)
return (wave_sequence_0, wave_sequence_1)