def dispatcher(self, TimeOut=2.0):
try:
#event loop: listen and multiplex until server process killed
Msg = "dispatcher server starting"
PCA_GenLib.WriteLog(Msg, 9)
while 1:
Msg = "listener dispatcher server loop"
PCA_GenLib.WriteLog(Msg, 9)
Flag = PCA_ThreadLib.GetMainTerminateFlag()
if Flag == "TRUE":
Msg = "end of dispatcher"
PCA_GenLib.WriteLog(Msg, 8)
break
readables, writeables, exceptions = select(
self.ReadSet, [], [], TimeOut)
for self.SocketConnection in readables:
##################################
#### for ready input sockets #####
##################################
if self.SocketConnection in self.SocketConnectionPool:
####################################
## port socket: accept new client ##
## accept should not block ##
####################################
self.connection, address = self.SocketConnection.accept(
)
Msg = 'Dispatcher New Connection <%s> from :%s' % (
id(self.connection), address
) # connection is a new socket
PCA_GenLib.WriteLog(Msg, 1)
Msg = 'Create new thread'
PCA_GenLib.WriteLog(Msg, 1)
PCA_ThreadLib.SetTerminateFlag("FALSE")
thread.start_new(ServerThreads, (
self.connection,
self.XMLCFG,
))
PCA_ThreadLib.SetMainTerminateFlag("TRUE")
time.sleep(2)
PCA_ThreadLib.SetTerminateFlag("TRUE")
time.sleep(2)
except:
Msg = "dispatcher error : <%s>,<%s> " % (sys.exc_type,
sys.exc_value)
PCA_GenLib.WriteLog(Msg, 0)
PCA_ThreadLib.SetMainTerminateFlag("TRUE")
time.sleep(2)
PCA_ThreadLib.SetTerminateFlag("TRUE")
time.sleep(2)
raise
def readDataFromSocket(self, Length=1024, ReadAttempts=1, TimeOut=3.0):
try:
Msg = "readDataFromSocket "
PCA_GenLib.WriteLog(Msg, 9)
Msg = "Length to read = <%s> " % Length
PCA_GenLib.WriteLog(Msg, 8)
Msg = "TimeOut = <%s> Seconds " % TimeOut
PCA_GenLib.WriteLog(Msg, 8)
Msg = "ReadAttempts = <%s> " % ReadAttempts
PCA_GenLib.WriteLog(Msg, 8)
for i in range(ReadAttempts):
readables, writeables, exceptions = select(
self.ReadSet, [], [], TimeOut)
for SocketFD in readables:
if (SocketFD == self.AcceptorConnection):
Message = self.AcceptorConnection.recv(Length)
if len(Message) == 0:
Msg = "Server Close Connection %s " % self.ThreadID
PCA_GenLib.WriteLog(Msg, 1)
raise socket.error, Msg
Msg = "ReadDataFromSocket OK"
PCA_GenLib.WriteLog(Msg, 9)
return Message
Msg = "readDataFromSocket retry time out !"
PCA_GenLib.WriteLog(Msg, 6)
return None
except socket.error:
Flag = PCA_ThreadLib.SetTerminateFlag("TRUE")
Msg = "end of ClientRequestHandler "
PCA_GenLib.WriteLog(Msg, 3)
time.sleep(5)
self.AcceptorConnection.close()
raise socket.error
except:
Msg = "readDataFromSocket error : <%s>,<%s> " % (sys.exc_type,
sys.exc_value)
PCA_GenLib.WriteLog(Msg, 0)
Flag = PCA_ThreadLib.SetTerminateFlag("TRUE")
raise
def ServerThreads(AcceptorConnection, XMLCFG):
try:
Msg = "ServerThreads Init ..."
PCA_GenLib.WriteLog(Msg, 9)
Response = ServerHandler(AcceptorConnection, XMLCFG)
Response.dispatcher()
Msg = "ServerThreads Ok ..."
PCA_GenLib.WriteLog(Msg, 9)
except:
PCA_ThreadLib.SetTerminateFlag("TRUE")
Msg = "ServerThreads error : <%s>,<%s> " % (sys.exc_type,
sys.exc_value)
PCA_GenLib.WriteLog(Msg, 0)
raise
def ResponseThread(SocketBuffer, ClientConnector, XMLCFG):
global ExitFlag
try:
Msg = "ResponseThread Init ..."
PCA_GenLib.WriteLog(Msg, 9)
ServerResponseHandler = ResponseHandler(XMLCFG)
ServerResponseHandler.handle_event(SocketBuffer, ClientConnector)
Msg = "ResponseThread Ok ..."
PCA_GenLib.WriteLog(Msg, 9)
SocketMutex.acquire()
ExitFlag = "TRUE"
SocketMutex.release()
Msg = "normal end of ResponseThread"
PCA_GenLib.WriteLog(Msg, 1)
except:
PCA_ThreadLib.SetTerminateFlag("TRUE")
Msg = "error end of ResponseThread"
PCA_GenLib.WriteLog(Msg, 1)
SocketMutex.acquire()
ExitFlag = "TRUE"
SocketMutex.release()
Msg = "ResponseThread error : <%s>,<%s> " % (sys.exc_type,
sys.exc_value)
PCA_GenLib.WriteLog(Msg, 0)
try:
Msg = "close Server connection "
PCA_GenLib.WriteLog(Msg, 1)
ClientConnector.Close()
except:
x = 1
return
def handle_event(self, SocketBuffer, ClientConnector):
global ExitFlag
AcceptorConnection = None
try:
Message = None
Msg = "ResponseHandler handle_event Init ..."
PCA_GenLib.WriteLog(Msg, 9)
while 1:
#######################################################
## Read Response from Server
##
#######################################################
Flag = PCA_ThreadLib.GetTerminateFlag()
SocketMutex.acquire()
Flag = ExitFlag
SocketMutex.release()
if Flag == "TRUE":
Msg = "end of response handler bf read"
PCA_GenLib.WriteLog(Msg, 1)
break
try:
Message = ClientConnector.readDataFromSocket(
Length=1024, TimeOut=5.0, ReadAttempts=1)
except socket.error:
Msg = "ResponseHandler readDataFromSocket socket (Server) error"
PCA_GenLib.WriteLog(Msg, 1)
Msg = "Re-Connect to Server ....."
PCA_GenLib.WriteLog(Msg, 1)
ClientConnector = ConnectToServer(ClientConnector)
continue
except select.error:
Msg = "ResponseHandler readDataFromSocket socket select (Server) error"
PCA_GenLib.WriteLog(Msg, 1)
Msg = "close Server connection "
PCA_GenLib.WriteLog(Msg, 1)
ClientConnector = ConnectToServer(ClientConnector)
continue
Flag = PCA_ThreadLib.GetTerminateFlag()
if Flag == "TRUE":
Msg = "end of response handler af read"
PCA_GenLib.WriteLog(Msg, 1)
break
if Message == None:
Msg = "read data from Server 5 seconds time-out"
PCA_GenLib.WriteLog(Msg, 3)
continue
self.parser.parse(Message)
command_id = self.handler.get_smpp_command_desc()
command_seq_no = self.handler.get_smpp_seq_no()
Msg = "recv from Server =*%s*" % command_id
PCA_GenLib.WriteLog(Msg, 1)
#####################################################################
## Send back to client
#####################################################################
ServerID = command_seq_no
if command_id == "deliver_sm":
ServerID = command_seq_no
SOURCD_ID = ClientConnector.get_SOURCD_ID()
Msg = "delivery_sm request , SOURCD_ID = %s" % SOURCD_ID
PCA_GenLib.WriteLog(Msg, 1)
SocketMutex.acquire()
try:
SocketBuffer[ServerID] = SOURCD_ID
except:
Msg = "get SocketBuffer error =\n%s" % self.SocketBuffer
PCA_GenLib.WriteLog(Msg, 1)
SocketMutex.release()
ServerID = "active_client"
try:
(AcceptorConnection) = SocketBuffer[ServerID]
Msg = "delivery_sm request , use latest active client connection %s" % id(
AcceptorConnection)
PCA_GenLib.WriteLog(Msg, 1)
except:
x = 1
else:
if SocketBuffer.has_key(ServerID):
SocketMutex.acquire()
try:
(AcceptorConnection) = SocketBuffer[ServerID]
del SocketBuffer[ServerID]
Msg = "query SocketBuffer for seq_no : %s we got %s" % (
command_seq_no, id(AcceptorConnection))
PCA_GenLib.WriteLog(Msg, 1)
except:
Msg = "get SocketBuffer error =\n%s" % SocketBuffer
PCA_GenLib.WriteLog(Msg, 1)
SocketMutex.release()
Msg = "delivery_sm request , use previouse connection "
PCA_GenLib.WriteLog(Msg, 1)
#break
SocketMutex.release()
else:
Msg = "Can not find originl client request connection =\n%s" % SocketBuffer
PCA_GenLib.WriteLog(Msg, 1)
self.WriteSet = []
self.ReadSet = []
self.ReadSet.append(
AcceptorConnection) # add to select list, wait
self.WriteSet.append(
AcceptorConnection) # add to select list, wait
if AcceptorConnection == None:
continue
try:
result = self.sendDataToSocket(AcceptorConnection,
Message,
TimeOut=0.1,
WriteAttempts=3)
if result != None:
Msg = "send back to Client ok : id=<%s>" % (
id(AcceptorConnection))
PCA_GenLib.WriteLog(Msg, 1)
else:
Msg = "send back to Client timeout failure : id=<%s>" % (
id(AcceptorConnection))
PCA_GenLib.WriteLog(Msg, 1)
except socket.error:
Msg = "ResponseHandler sendDataToSocket (Client) socket error"
PCA_GenLib.WriteLog(Msg, 1)
Msg = "send back to Client socket error : id=<%s>" % (
id(AcceptorConnection))
PCA_GenLib.WriteLog(Msg, 1)
Msg = "should close Client connection but not in response thread"
PCA_GenLib.WriteLog(Msg, 1)
Msg = "ResponseHandler handle_event Ok ..."
PCA_GenLib.WriteLog(Msg, 9)
except socket.error:
Msg = "ResponseHandler handle_event socket exception"
PCA_GenLib.WriteLog(Msg, 1)
time.sleep(0.2)
except:
PCA_ThreadLib.SetTerminateFlag("TRUE")
Msg = "ResponseHandler handle_event error : <%s>,<%s> " % (
sys.exc_type, sys.exc_value)
PCA_GenLib.WriteLog(Msg, 0)
try:
Msg = "close Server connection "
PCA_GenLib.WriteLog(Msg, 1)
ClientConnector.Close()
except:
x = 1
def handle_event(self, AcceptorConnection):
command_seq_no = 0
try:
Msg = "RequestHandler handle_event Init ..."
PCA_GenLib.WriteLog(Msg, 9)
Message = None
self.response_message = None
client_connection_id = "%s" % id(AcceptorConnection)
#######################################################
##
## Read Request from Client
##
#######################################################
try:
Message = self.readDataFromSocket(AcceptorConnection,
Length=1024,
TimeOut=5.0,
ReadAttempts=1)
except KeyError:
Msg = "RequestHandler readDataFromSocket Key.error , connection already closed"
PCA_GenLib.WriteLog(Msg, 2)
Msg = "Del ConnectionLoginState"
PCA_GenLib.WriteLog(Msg, 0)
try:
del self.ConnectionLoginState[id(AcceptorConnection)]
except:
x = 1
raise socket.error
except socket.error:
Msg = "RequestHandler readDataFromSocket Client socket.error"
PCA_GenLib.WriteLog(Msg, 1)
Msg = "close Client connection id=<%s>" % client_connection_id
PCA_GenLib.WriteLog(Msg, 1)
try:
self.ReadSet.remove(AcceptorConnection)
self.WriteSet.remove(AcceptorConnection)
except:
x = 1
AcceptorConnection.close()
Msg = "Del ConnectionLoginState"
PCA_GenLib.WriteLog(Msg, 0)
try:
del self.ConnectionLoginState[id(AcceptorConnection)]
except:
x = 1
raise socket.error
Msg = "recv from Client : id=<%s>" % (client_connection_id)
PCA_GenLib.WriteLog(Msg, 2)
self.parser.parse(Message)
command_id = self.handler.get_smpp_command_desc()
command_seq_no = self.handler.get_smpp_seq_no()
#if resp_data == "deliver_sm":
Msg = "recv from Client =*%s*" % command_id
PCA_GenLib.WriteLog(Msg, 1)
#####################################################################
### Client Message Maybe more than 1 request
#####################################################################
if self.ConnectionLoginState[id(AcceptorConnection)] == 'N':
Msg = "recv from Client but no bind request yet ,id=<%s>" % (
client_connection_id)
PCA_GenLib.WriteLog(Msg, 0)
self.SMPPWriter = PCA_SMPPMessage.SMPP_PDU_Writer(
command_seq_no)
if command_id == "bind_transceiver":
(system_id, system_type,
passwd) = self.handler.get_smpp_bind_info()
if (system_id == self.UID) and (
system_type == self.TYPE) and (passwd
== self.PASSWD):
self.SMPPWriter.ConstructHeader(
PCA_SMPP_Parameter_Tag.bind_transceiver_resp)
self.response_message = self.SMPPWriter.ConstructParameter(
"gateway" + chr(0x00))
#Msg = " data =\n%s" % PCA_GenLib.HexDump(self.response_message)
#PCA_GenLib.WriteLog(Msg,0)
self.ConnectionLoginState[id(
self.SocketConnection)] = 'Y'
else:
Msg = "incorrect bind info , send bind error %s " % (
client_connection_id)
PCA_GenLib.WriteLog(Msg, 0)
Msg = "input id:<%s>:type:<%s>:pwd:<%s> " % (
system_id, system_type, passwd)
PCA_GenLib.WriteLog(Msg, 0)
bind_error = chr(0x00) + chr(0x00) + chr(0x00) + chr(
0x0d)
self.SMPPWriter.ConstructStatus(bind_error)
self.SMPPWriter.ConstructHeader(
PCA_SMPP_Parameter_Tag.bind_transmitter_resp)
self.response_message = self.SMPPWriter.ConstructParameter(
"bind error")
elif command_id == "bind_receiver":
self.SMPPWriter.ConstructHeader(
PCA_SMPP_Parameter_Tag.bind_receiver_resp)
self.response_message = self.SMPPWriter.ConstructParameter(
"gateway")
self.ConnectionLoginState[id(self.SocketConnection)] = 'Y'
elif command_id == "submit_sm":
Msg = " Incorrect BIND Status %s " % (client_connection_id)
PCA_GenLib.WriteLog(Msg, 0)
smpp_command_id_incorrect_bind_status = chr(0x00) + chr(
0x00) + chr(0x00) + chr(0x04)
self.SMPPWriter.ConstructStatus(
smpp_command_id_incorrect_bind_status)
self.SMPPWriter.ConstructHeader(
PCA_SMPP_Parameter_Tag.submit_sm_resp)
self.response_message = self.SMPPWriter.ConstructParameter(
"submit error")
elif command_id == "unbind":
self.SMPPWriter.ConstructHeader(
PCA_SMPP_Parameter_Tag.unbind_resp)
self.response_message = self.SMPPWriter.ConstructParameter(
)
elif command_id == "enquire_link":
self.SMPPWriter.ConstructHeader(
PCA_SMPP_Parameter_Tag.enquire_link_resp)
self.response_message = self.SMPPWriter.ConstructParameter(
)
else:
Msg = " client message =\n%s" % PCA_GenLib.HexDump(
Message)
PCA_GenLib.WriteLog(Msg, 0)
Msg = "unexpected data ,id=<%s> , no response " % (
client_connection_id)
PCA_GenLib.WriteLog(Msg, 0)
return
self.parser.parse(self.response_message)
try:
Msg = "send response back to Client "
PCA_GenLib.WriteLog(Msg, 0)
result = self.sendDataToSocket(AcceptorConnection,
self.response_message,
TimeOut=0.1,
WriteAttempts=3)
return
except:
Msg = "send response back to client error : <%s>,<%s> " % (
sys.exc_type, sys.exc_value)
PCA_GenLib.WriteLog(Msg, 0)
return
try:
try:
if command_id == "submit_sm":
######### Get one XMLServer Connection fd for send request ##############
try:
destination_addr = self.handler.get_smpp_destination_addr(
)
Msg = "destination_addr = %s" % destination_addr
PCA_GenLib.WriteLog(Msg, 5)
self.target_id = int(destination_addr) % 3
self.target_id = self.target_id + 1
except:
self.target_id = 1
Msg = "delivery_sm_resp use source_id=1"
PCA_GenLib.WriteLog(Msg, 1)
Msg = "target_id = %s" % self.target_id
PCA_GenLib.WriteLog(Msg, 5)
for (ClientConnector,
Source_id) in self.ClientConnectorList:
if int(Source_id) == self.target_id:
break
ServerID = command_seq_no
SocketMutex.acquire()
try:
Msg = "SocketBuffer %s=%s" % (
command_seq_no, id(AcceptorConnection))
PCA_GenLib.WriteLog(Msg, 1)
self.SocketBuffer[ServerID] = AcceptorConnection
except:
Msg = "get SocketBuffer error =\n%s" % self.SocketBuffer
PCA_GenLib.WriteLog(Msg, 1)
SocketMutex.release()
result = ClientConnector.sendDataToSocket(
Message, TimeOutSeconds=0.01, WriteAttempts=1)
if result != None:
Msg = "send to Server Source_id=<%s> ok " % (
Source_id)
PCA_GenLib.WriteLog(Msg, 2)
else:
Msg = "send to Server Source_id=<%s> failure timeout " % (
Source_id)
PCA_GenLib.WriteLog(Msg, 1)
Msg = "Close Connection: source_id=*%s* " % Source_id
PCA_GenLib.WriteLog(Msg, 1)
elif command_id == "enquire_link":
self.SMPPWriter = PCA_SMPPMessage.SMPP_PDU_Writer(
command_seq_no)
self.SMPPWriter.ConstructHeader(
PCA_SMPP_Parameter_Tag.enquire_link_resp)
self.response_message = self.SMPPWriter.ConstructParameter(
)
self.parser.parse(self.response_message)
Msg = "send response back to Client "
PCA_GenLib.WriteLog(Msg, 0)
self.sendDataToSocket(AcceptorConnection,
self.response_message, 0.1, 3)
elif command_id == "unbind":
Msg = "unbind requeset , send unbind and remove id=%s" % id(
self.SocketConnection)
PCA_GenLib.WriteLog(Msg, 2)
self.SMPPWriter = PCA_SMPPMessage.SMPP_PDU_Writer(
command_seq_no)
self.SMPPWriter.ConstructHeader(
PCA_SMPP_Parameter_Tag.unbind_resp)
self.response_message = self.SMPPWriter.ConstructParameter(
)
self.ConnectionLoginState[id(
self.SocketConnection)] = 'N'
self.parser.parse(self.response_message)
Msg = "send response back to Client "
PCA_GenLib.WriteLog(Msg, 0)
self.sendDataToSocket(AcceptorConnection,
self.response_message, 0.1, 3)
elif command_id == "deliver_sm_resp":
ServerID = command_seq_no
SocketMutex.acquire()
try:
SOURCD_ID = self.SocketBuffer[ServerID]
del self.SocketBuffer[ServerID]
Msg = "query SocketBuffer for deliver_sm_resp seq_no : %s we got %s" % (
command_seq_no, SOURCD_ID)
PCA_GenLib.WriteLog(Msg, 1)
except:
Msg = "get SocketBuffer error =\n%s" % self.SocketBuffer
PCA_GenLib.WriteLog(Msg, 1)
SocketMutex.release()
Msg = "delivery_sm request , use SOURCD_ID = 1 "
PCA_GenLib.WriteLog(Msg, 1)
SOURCD_ID = 1
SocketMutex.release()
Msg = "send response back to Client "
PCA_GenLib.WriteLog(Msg, 0)
for (ClientConnector,
Source_id) in self.ClientConnectorList:
if int(Source_id) == int(SOURCD_ID):
break
result = ClientConnector.sendDataToSocket(
Message, TimeOutSeconds=0.01, WriteAttempts=1)
if result != None:
Msg = "send to Server Source_id=<%s> ok " % (
Source_id)
PCA_GenLib.WriteLog(Msg, 2)
else:
Msg = "send to Server Source_id=<%s> failure timeout " % (
Source_id)
PCA_GenLib.WriteLog(Msg, 1)
Msg = "Close Connection: source_id=*%s* " % Source_id
PCA_GenLib.WriteLog(Msg, 1)
else:
Msg = "un-support command , ignore"
PCA_GenLib.WriteLog(Msg, 1)
except socket.error:
Msg = "send to Primary Server Source_id=<%s> socket error " % (
Source_id)
PCA_GenLib.WriteLog(Msg, 2)
except:
Msg = "error : <%s>,<%s> " % (sys.exc_type, sys.exc_value)
PCA_GenLib.WriteLog(Msg, 0)
Msg = "nothing send back to Client ........ "
PCA_GenLib.WriteLog(Msg, 0)
Msg = "RequestHandler handle_event Ok ..."
PCA_GenLib.WriteLog(Msg, 9)
except socket.error:
Msg = "RequestHandler handle_event socket exception,delete socket buffer id=<%s>" % client_connection_id
PCA_GenLib.WriteLog(Msg, 3)
Msg = "close client connection id=<%s>" % client_connection_id
PCA_GenLib.WriteLog(Msg, 1)
SocketMutex.acquire()
try:
del self.SocketBuffer[client_connection_id]
except:
x = 1
SocketMutex.release()
time.sleep(0.1)
except:
PCA_ThreadLib.SetTerminateFlag("TRUE")
Msg = "RequestHandler handle_event error : <%s>,<%s> " % (
sys.exc_type, sys.exc_value)
PCA_GenLib.WriteLog(Msg, 0)
try:
Msg = "close Server connection "
PCA_GenLib.WriteLog(Msg, 1)
ClientConnector.Close()
Msg = "close Client connection "
PCA_GenLib.WriteLog(Msg, 1)
AcceptorConnection.close()
except:
x = 1
raise
def dispatcher(self, TimeOut=2.0):
global ExitFlag
try:
Msg = "dispatcher server starting ........"
PCA_GenLib.WriteLog(Msg, 1)
while 1:
Msg = "listener dispatcher server loop %s timeout" % TimeOut
PCA_GenLib.WriteLog(Msg, 3)
Flag = PCA_ThreadLib.GetMainTerminateFlag()
SocketMutex.acquire()
Flag = ExitFlag
SocketMutex.release()
if Flag == "TRUE":
Msg = "end of PSAAdapter dispatcher"
PCA_GenLib.WriteLog(Msg, 1)
break
readables, writeables, exceptions = select.select(
self.ReadSet, [], [], TimeOut)
for self.SocketConnection in readables:
###################################################################
#
# for ready input sockets
#
###################################################################
if self.SocketConnection in self.SocketConnectionPool:
########################################
##
## port socket: accept new client
## accept should not block
##
########################################
self.connection, address = self.SocketConnection.accept(
)
Msg = 'Dispatcher New Connection <%s> from :%s' % (
id(self.connection), address
) # connection is a new socket
PCA_GenLib.WriteLog(Msg, 1)
self.ReadSet.append(
self.connection) # add to select list, wait
self.WriteSet.append(
self.connection) # add to select list, wait
client_ip = address[0]
client_port = address[1]
SocketMutex.acquire()
ServerID = "active_client"
self.SocketBuffer[ServerID] = (self.connection)
SocketMutex.release()
else:
if not self.ConnectionLoginState.has_key(
id(self.SocketConnection)):
self.ConnectionLoginState[id(
self.SocketConnection)] = 'N'
Msg = "Set ConnectionLoginState <%s> to N " % id(
self.SocketConnection)
PCA_GenLib.WriteLog(Msg, 0)
SocketMutex.acquire()
ServerID = "active_client"
self.SocketBuffer[ServerID] = (self.SocketConnection)
SocketMutex.release()
self.handle_event(self.SocketConnection)
Msg = "end of dispatcher"
PCA_GenLib.WriteLog(Msg, 0)
PCA_ThreadLib.SetMainTerminateFlag("TRUE")
time.sleep(2)
PCA_ThreadLib.SetTerminateFlag("TRUE")
time.sleep(2)
SocketMutex.acquire()
ExitFlag = "TRUE"
SocketMutex.release()
except:
Msg = "dispatcher error : <%s>,<%s> " % (sys.exc_type,
sys.exc_value)
PCA_GenLib.WriteLog(Msg, 0)
PCA_ThreadLib.SetMainTerminateFlag("TRUE")
time.sleep(2)
PCA_ThreadLib.SetTerminateFlag("TRUE")
time.sleep(2)
SocketMutex.acquire()
ExitFlag = "TRUE"
SocketMutex.release()
raise
def __init__(self, XMLCFG, cfg_file_name):
try:
PCA_ThreadServer.ThreadAcceptor.__init__(self, XMLCFG)
self.XMLCFG = XMLCFG
self.cfg_file_name = cfg_file_name
PCA_ThreadLib.SetMainTerminateFlag("FALSE")
PCA_ThreadLib.SetTerminateFlag("FALSE")
Tag = "APPCFG"
StartTag = Tag
StartTag = "<%s>" % Tag
EndTag = "</%s>" % Tag
Tag = "SYSTEM_ID"
self.UID = PCA_XMLParser.GetXMLTagValue(XMLCFG, Tag)
Msg = "SYSTEM_ID = <%s>" % (self.UID)
PCA_GenLib.WriteLog(Msg, 1)
Tag = "SYSTEM_TYPE"
self.TYPE = PCA_XMLParser.GetXMLTagValue(XMLCFG, Tag)
Msg = "SYSTEM_TYPE = <%s>" % (self.TYPE)
PCA_GenLib.WriteLog(Msg, 1)
Tag = "PASSWD"
self.PASSWD = PCA_XMLParser.GetXMLTagValue(XMLCFG, Tag)
Msg = "PASSWD = <%s>" % (self.PASSWD)
PCA_GenLib.WriteLog(Msg, 1)
(APPCFG,
XMLCFG) = PCA_XMLParser.GetTagSection(XMLCFG, StartTag, EndTag)
TaskList = []
XMLConfiguration = PCA_XMLConfiguration.File_Reader(APPCFG, "TASK")
###################################################################
#
# Read Configuration File to Task List
#
###################################################################
while 1:
Task = XMLConfiguration.GetXMLConfiguration()
if (Task == None):
#Msg = "Your Task = <%s>" % (Task)
#PCA_GenLib.WriteLog(Msg,1)
break
else:
Msg = "Your Task = <%s>" % (Task)
PCA_GenLib.WriteLog(Msg, 4)
########################################################
#
# Connect to Multi Server
#
########################################################
Tag = "CLIENT_SOCKET"
dll_file_name = PCA_XMLParser.GetXMLTagValue(
self.XMLCFG, Tag)
Msg = "%s=%s" % (Tag, dll_file_name)
PCA_GenLib.WriteLog(Msg, 1)
Script_File = PCA_DLL.DLL(dll_file_name)
factory_function = "Connector"
factory_component = Script_File.symbol(factory_function)
self.ClientConnector = factory_component(Task)
self.ClientConnector.connect()
thread.start_new(ResponseThread, (
self.SocketBuffer,
self.ClientConnector,
self.XMLCFG,
))
time.sleep(0.5)
Tag = "SOURCD_ID"
Source_id = PCA_XMLParser.GetXMLTagValue(Task, Tag)
Msg = "%s=%s" % (Tag, Source_id)
PCA_GenLib.WriteLog(Msg, 1)
self.ClientConnectorList.append(
(self.ClientConnector, Source_id))
self.number_of_server_connection = self.number_of_server_connection + 1
XMLConfiguration.Close()
self.parser = PCA_SMPPParser.Parser()
self.handler = PCA_SMPPParser.Handler()
self.parser.setContentHandler(self.handler)
except:
Msg = "Gateway ProxyAcceptor Initial error : <%s>,<%s> " % (
sys.exc_type, sys.exc_value)
PCA_GenLib.WriteLog(Msg, 0)
raise