def addNewProject(ID, BuildMode):
"""
Add a new project for testing: build it and add to the Project Map file.
:param ID: is a short string used to identify a project.
"""
CurDir = os.path.abspath(os.curdir)
Dir = SATestBuild.getProjectDir(ID)
if not os.path.exists(Dir):
print "Error: Project directory is missing: %s" % Dir
sys.exit(-1)
# Build the project.
SATestBuild.testProject(ID, BuildMode, IsReferenceBuild=True)
# Add the project ID to the project map.
ProjectMapPath = os.path.join(CurDir, SATestBuild.ProjectMapFile)
if os.path.exists(ProjectMapPath):
FileMode = "r+b"
else:
print "Warning: Creating the Project Map file!!"
FileMode = "w+b"
with open(ProjectMapPath, FileMode) as PMapFile:
if (isExistingProject(PMapFile, ID)):
print >> sys.stdout, 'Warning: Project with ID \'', ID, \
'\' already exists.'
print >> sys.stdout, "Reference output has been regenerated."
else:
PMapWriter = csv.writer(PMapFile)
PMapWriter.writerow((ID, int(BuildMode)))
print "The project map is updated: ", ProjectMapPath
def updateReferenceResults(ProjName, ProjBuildMode):
ProjDir = SATestBuild.getProjectDir(ProjName)
RefResultsPath = os.path.join(ProjDir,
SATestBuild.getSBOutputDirName(IsReferenceBuild=True))
CreatedResultsPath = os.path.join(ProjDir,
SATestBuild.getSBOutputDirName(IsReferenceBuild=False))
if not os.path.exists(CreatedResultsPath):
print >> sys.stderr, "New results not found, was SATestBuild.py "\
"previously run?"
sys.exit(-1)
# Remove reference results.
runCmd('git rm -r "%s"' % (RefResultsPath,))
# Replace reference results with a freshly computed once.
runCmd('cp -r "%s" "%s"' % (CreatedResultsPath, RefResultsPath,))
# Run cleanup script.
with open(SATestBuild.getBuildLogPath(RefResultsPath), "wb+") as PBuildLogFile:
SATestBuild.runCleanupScript(ProjDir, PBuildLogFile)
SATestBuild.normalizeReferenceResults(ProjDir, RefResultsPath, ProjBuildMode)
# Clean up the generated difference results.
SATestBuild.cleanupReferenceResults(RefResultsPath)
# Remove the created .diffs file before adding.
runCmd('rm -f "%s/*/%s"' % (RefResultsPath, SATestBuild.DiffsSummaryFileName))
runCmd('git add "%s"' % (RefResultsPath,))
def addNewProject(ID):
CurDir = os.path.abspath(os.curdir)
Dir = SATestBuild.getProjectDir(ID)
if not os.path.exists(Dir):
print "Error: Project directory is missing: %s" % Dir
sys.exit(-1)
# Build the project.
SATestBuild.testProject(ID, True, Dir)
# Add the project ID to the project map.
ProjectMapPath = os.path.join(CurDir, SATestBuild.ProjectMapFile)
if os.path.exists(ProjectMapPath):
PMapFile = open(ProjectMapPath, "r+b")
else:
print "Warning: Creating the Project Map file!!"
PMapFile = open(ProjectMapPath, "w+b")
try:
PMapReader = csv.reader(PMapFile)
for I in PMapReader:
IID = I[0]
if ID == IID:
print >> sys.stderr, "Warning: Project with ID '", ID, "' already exists."
sys.exit(-1)
PMapWriter = csv.writer(PMapFile)
PMapWriter.writerow((ID, Dir))
finally:
PMapFile.close()
print "The project map is updated: ", ProjectMapPath
def add_new_project(project: ProjectInfo):
"""
Add a new project for testing: build it and add to the Project Map file.
:param name: is a short string used to identify a project.
"""
test_info = SATestBuild.TestInfo(project, is_reference_build=True)
tester = SATestBuild.ProjectTester(test_info)
project_dir = tester.get_project_dir()
if not os.path.exists(project_dir):
print(f"Error: Project directory is missing: {project_dir}")
sys.exit(-1)
# Build the project.
tester.test()
# Add the project name to the project map.
project_map = ProjectMap(should_exist=False)
if is_existing_project(project_map, project):
print(f"Warning: Project with name '{project.name}' already exists.",
file=sys.stdout)
print("Reference output has been regenerated.", file=sys.stdout)
else:
project_map.projects.append(project)
project_map.save()
def addNewProject(ID, BuildMode):
CurDir = os.path.abspath(os.curdir)
Dir = SATestBuild.getProjectDir(ID)
if not os.path.exists(Dir):
print "Error: Project directory is missing: %s" % Dir
sys.exit(-1)
# Build the project.
SATestBuild.testProject(ID, BuildMode, IsReferenceBuild=True, Dir=Dir)
# Add the project ID to the project map.
ProjectMapPath = os.path.join(CurDir, SATestBuild.ProjectMapFile)
if os.path.exists(ProjectMapPath):
PMapFile = open(ProjectMapPath, "r+b")
else:
print "Warning: Creating the Project Map file!!"
PMapFile = open(ProjectMapPath, "w+b")
try:
if (isExistingProject(PMapFile, ID)):
print >> sys.stdout, 'Warning: Project with ID \'', ID, \
'\' already exists.'
print >> sys.stdout, "Reference output has been regenerated."
else:
PMapWriter = csv.writer(PMapFile)
PMapWriter.writerow((ID, int(BuildMode)))
print "The project map is updated: ", ProjectMapPath
finally:
PMapFile.close()
def addNewProject(ID):
CurDir = os.path.abspath(os.curdir)
Dir = SATestBuild.getProjectDir(ID)
if not os.path.exists(Dir):
print "Error: Project directory is missing: %s" % Dir
sys.exit(-1)
# Build the project.
SATestBuild.testProject(ID, True, Dir)
# Add the project ID to the project map.
ProjectMapPath = os.path.join(CurDir, SATestBuild.ProjectMapFile)
if os.path.exists(ProjectMapPath):
PMapFile = open(ProjectMapPath, "r+b")
else:
print "Warning: Creating the Project Map file!!"
PMapFile = open(ProjectMapPath, "w+b")
try:
PMapReader = csv.reader(PMapFile)
for I in PMapReader:
IID = I[0]
if ID == IID:
print >> sys.stderr, 'Warning: Project with ID \'', ID, \
'\' already exists.'
sys.exit(-1)
PMapWriter = csv.writer(PMapFile)
PMapWriter.writerow((ID, Dir))
finally:
PMapFile.close()
print "The project map is updated: ", ProjectMapPath
def addNewProject(ID, BuildMode):
"""
Add a new project for testing: build it and add to the Project Map file.
:param ID: is a short string used to identify a project.
"""
CurDir = os.path.abspath(os.curdir)
Dir = SATestBuild.getProjectDir(ID)
if not os.path.exists(Dir):
print "Error: Project directory is missing: %s" % Dir
sys.exit(-1)
# Build the project.
SATestBuild.testProject(ID, BuildMode, IsReferenceBuild=True)
# Add the project ID to the project map.
ProjectMapPath = os.path.join(CurDir, SATestBuild.ProjectMapFile)
if os.path.exists(ProjectMapPath):
FileMode = "r+b"
else:
print "Warning: Creating the Project Map file!!"
FileMode = "w+b"
with open(ProjectMapPath, FileMode) as PMapFile:
if (isExistingProject(PMapFile, ID)):
print >> sys.stdout, 'Warning: Project with ID \'', ID, \
'\' already exists.'
print >> sys.stdout, "Reference output has been regenerated."
else:
PMapWriter = csv.writer(PMapFile)
PMapWriter.writerow((ID, int(BuildMode)))
print "The project map is updated: ", ProjectMapPath
def addNewProject(ID, BuildMode) :
CurDir = os.path.abspath(os.curdir)
Dir = SATestBuild.getProjectDir(ID)
if not os.path.exists(Dir):
print "Error: Project directory is missing: %s" % Dir
sys.exit(-1)
# Build the project.
SATestBuild.testProject(ID, BuildMode, IsReferenceBuild=True, Dir=Dir)
# Add the project ID to the project map.
ProjectMapPath = os.path.join(CurDir, SATestBuild.ProjectMapFile)
if os.path.exists(ProjectMapPath):
PMapFile = open(ProjectMapPath, "r+b")
else:
print "Warning: Creating the Project Map file!!"
PMapFile = open(ProjectMapPath, "w+b")
try:
if (isExistingProject(PMapFile, ID)) :
print >> sys.stdout, 'Warning: Project with ID \'', ID, \
'\' already exists.'
print >> sys.stdout, "Reference output has been regenerated."
else:
PMapWriter = csv.writer(PMapFile)
PMapWriter.writerow( (ID, int(BuildMode)) );
print "The project map is updated: ", ProjectMapPath
finally:
PMapFile.close()
def main(argv):
if len(argv) == 2 and argv[1] in ('-h', '--help'):
print >> sys.stderr, "Update static analyzer reference results based "\
"\non the previous run of SATestBuild.py.\n"\
"\nN.B.: Assumes that SATestBuild.py was just run"
sys.exit(1)
with SATestBuild.projectFileHandler() as f:
for (ProjName, ProjBuildMode) in SATestBuild.iterateOverProjects(f):
updateReferenceResults(ProjName, int(ProjBuildMode))
def main(argv):
if len(argv) == 2 and argv[1] in ('-h', '--help'):
print >> sys.stderr, "Update static analyzer reference results based "\
"\non the previous run of SATestBuild.py.\n"\
"\nN.B.: Assumes that SATestBuild.py was just run"
sys.exit(1)
with SATestBuild.projectFileHandler() as f:
for (ProjName, ProjBuildMode) in SATestBuild.iterateOverProjects(f):
updateReferenceResults(ProjName, int(ProjBuildMode))
def main(argv):
if len(argv) == 2 and argv[1] in ("-h", "--help"):
print(
"Update static analyzer reference results based "
"\non the previous run of SATestBuild.py.\n"
"\nN.B.: Assumes that SATestBuild.py was just run",
file=sys.stderr)
sys.exit(1)
with open(SATestBuild.get_project_map_path(), "r") as f:
for project_name, build_mode in SATestBuild.get_projects(f):
update_reference_results(project_name, int(build_mode))
def build(parser, args):
SATestBuild.VERBOSE = args.verbose
project_map = ProjectMap()
projects = project_map.projects
if args.projects:
projects_arg = args.projects.split(",")
available_projects = [project.name for project in projects]
# validate that given projects are present in the project map file
for manual_project in projects_arg:
if manual_project not in available_projects:
parser.error("Project '{project}' is not found in "
"the project map file. Available projects are "
"{all}.".format(project=manual_project,
all=available_projects))
projects = [
project.with_fields(enabled=project.name in projects_arg)
for project in projects
]
tester = SATestBuild.RegressionTester(args.jobs, projects,
args.override_compiler,
args.extra_analyzer_config,
args.regenerate, args.strictness)
tests_passed = tester.test_all()
if not tests_passed:
sys.stderr.write("ERROR: Tests failed.\n")
sys.exit(42)
def update_reference_results(project: ProjectInfo, git: bool = False):
test_info = SATestBuild.TestInfo(project)
tester = SATestBuild.ProjectTester(test_info)
project_dir = tester.get_project_dir()
tester.is_reference_build = True
ref_results_path = tester.get_output_dir()
tester.is_reference_build = False
created_results_path = tester.get_output_dir()
if not os.path.exists(created_results_path):
print(f"Skipping project '{project.name}', "
f"it doesn't have newer results.",
file=sys.stderr)
return
build_log_path = SATestBuild.get_build_log_path(ref_results_path)
build_log_dir = os.path.dirname(os.path.abspath(build_log_path))
os.makedirs(build_log_dir)
with open(build_log_path, "w+") as build_log_file:
def run_cmd(command: str):
if Verbose:
print(f"Executing {command}")
check_call(command, shell=True, stdout=build_log_file)
# Remove reference results: in git, and then again for a good measure
# with rm, as git might not remove things fully if there are empty
# directories involved.
if git:
run_cmd(f"git rm -r -q '{ref_results_path}'")
shutil.rmtree(ref_results_path)
# Replace reference results with a freshly computed once.
shutil.copytree(created_results_path, ref_results_path, symlinks=True)
# Run cleanup script.
SATestBuild.run_cleanup_script(project_dir, build_log_file)
SATestBuild.normalize_reference_results(
project_dir, ref_results_path, project.mode)
# Clean up the generated difference results.
SATestBuild.cleanup_reference_results(ref_results_path)
if git:
run_cmd(f"git add '{ref_results_path}'")
def update_reference_results(project_name: str, build_mode: int):
project_info = SATestBuild.ProjectInfo(project_name, build_mode)
tester = SATestBuild.ProjectTester(project_info)
project_dir = tester.get_project_dir()
tester.is_reference_build = True
ref_results_path = os.path.join(project_dir, tester.get_output_dir())
tester.is_reference_build = False
created_results_path = os.path.join(project_dir, tester.get_output_dir())
if not os.path.exists(created_results_path):
print("New results not found, was SATestBuild.py previously run?",
file=sys.stderr)
sys.exit(1)
build_log_path = SATestBuild.get_build_log_path(ref_results_path)
build_log_dir = os.path.dirname(os.path.abspath(build_log_path))
os.makedirs(build_log_dir)
with open(build_log_path, "w+") as build_log_file:
def run_cmd(command: str):
if Verbose:
print(f"Executing {command}")
check_call(command, shell=True, stdout=build_log_file)
# Remove reference results: in git, and then again for a good measure
# with rm, as git might not remove things fully if there are empty
# directories involved.
run_cmd(f"git rm -r -q '{ref_results_path}'")
shutil.rmtree(ref_results_path)
# Replace reference results with a freshly computed once.
shutil.copytree(created_results_path, ref_results_path, symlinks=True)
# Run cleanup script.
SATestBuild.run_cleanup_script(project_dir, build_log_file)
SATestBuild.normalize_reference_results(project_dir, ref_results_path,
build_mode)
# Clean up the generated difference results.
SATestBuild.cleanup_reference_results(ref_results_path)
run_cmd(f"git add '{ref_results_path}'")
def updateReferenceResults(ProjName, ProjBuildMode):
ProjDir = SATestBuild.getProjectDir(ProjName)
RefResultsPath = os.path.join(
ProjDir, SATestBuild.getSBOutputDirName(IsReferenceBuild=True))
CreatedResultsPath = os.path.join(
ProjDir, SATestBuild.getSBOutputDirName(IsReferenceBuild=False))
if not os.path.exists(CreatedResultsPath):
print("New results not found, was SATestBuild.py "
"previously run?",
file=sys.stderr)
sys.exit(1)
BuildLogPath = SATestBuild.getBuildLogPath(RefResultsPath)
Dirname = os.path.dirname(os.path.abspath(BuildLogPath))
runCmd("mkdir -p '%s'" % Dirname)
with open(BuildLogPath, "w+") as PBuildLogFile:
# Remove reference results: in git, and then again for a good measure
# with rm, as git might not remove things fully if there are empty
# directories involved.
runCmd('git rm -r -q "%s"' % (RefResultsPath, ), stdout=PBuildLogFile)
runCmd('rm -rf "%s"' % (RefResultsPath, ), stdout=PBuildLogFile)
# Replace reference results with a freshly computed once.
runCmd('cp -r "%s" "%s"' % (
CreatedResultsPath,
RefResultsPath,
),
stdout=PBuildLogFile)
# Run cleanup script.
SATestBuild.runCleanupScript(ProjDir, PBuildLogFile)
SATestBuild.normalizeReferenceResults(ProjDir, RefResultsPath,
ProjBuildMode)
# Clean up the generated difference results.
SATestBuild.cleanupReferenceResults(RefResultsPath)
runCmd('git add "%s"' % (RefResultsPath, ), stdout=PBuildLogFile)
def updateReferenceResults(ProjName, ProjBuildMode):
ProjDir = SATestBuild.getProjectDir(ProjName)
RefResultsPath = os.path.join(
ProjDir, SATestBuild.getSBOutputDirName(IsReferenceBuild=True))
CreatedResultsPath = os.path.join(
ProjDir, SATestBuild.getSBOutputDirName(IsReferenceBuild=False))
if not os.path.exists(CreatedResultsPath):
print >> sys.stderr, "New results not found, was SATestBuild.py "\
"previously run?"
sys.exit(-1)
# Remove reference results: in git, and then again for a good measure
# with rm, as git might not remove things fully if there are empty
# directories involved.
runCmd('git rm -r -q "%s"' % (RefResultsPath, ))
runCmd('rm -rf "%s"' % (RefResultsPath, ))
# Replace reference results with a freshly computed once.
runCmd('cp -r "%s" "%s"' % (
CreatedResultsPath,
RefResultsPath,
))
# Run cleanup script.
BuildLogPath = SATestBuild.getBuildLogPath(RefResultsPath)
with open(BuildLogPath, "wb+") as PBuildLogFile:
SATestBuild.runCleanupScript(ProjDir, PBuildLogFile)
SATestBuild.normalizeReferenceResults(ProjDir, RefResultsPath,
ProjBuildMode)
# Clean up the generated difference results.
SATestBuild.cleanupReferenceResults(RefResultsPath)
# Remove the created .diffs file before adding.
removeDiffsSummaryFiles(RefResultsPath)
runCmd('git add "%s"' % (RefResultsPath, ))
def updateReferenceResults(ProjName, ProjBuildMode):
ProjDir = SATestBuild.getProjectDir(ProjName)
RefResultsPath = os.path.join(
ProjDir,
SATestBuild.getSBOutputDirName(IsReferenceBuild=True))
CreatedResultsPath = os.path.join(
ProjDir,
SATestBuild.getSBOutputDirName(IsReferenceBuild=False))
if not os.path.exists(CreatedResultsPath):
print >> sys.stderr, "New results not found, was SATestBuild.py "\
"previously run?"
sys.exit(-1)
# Remove reference results: in git, and then again for a good measure
# with rm, as git might not remove things fully if there are empty
# directories involved.
runCmd('git rm -r -q "%s"' % (RefResultsPath,))
runCmd('rm -rf "%s"' % (RefResultsPath,))
# Replace reference results with a freshly computed once.
runCmd('cp -r "%s" "%s"' % (CreatedResultsPath, RefResultsPath,))
# Run cleanup script.
BuildLogPath = SATestBuild.getBuildLogPath(RefResultsPath)
with open(BuildLogPath, "wb+") as PBuildLogFile:
SATestBuild.runCleanupScript(ProjDir, PBuildLogFile)
SATestBuild.normalizeReferenceResults(
ProjDir, RefResultsPath, ProjBuildMode)
# Clean up the generated difference results.
SATestBuild.cleanupReferenceResults(RefResultsPath)
# Remove the created .diffs file before adding.
removeDiffsSummaryFiles(RefResultsPath)
runCmd('git add "%s"' % (RefResultsPath,))
def add_new_project(name: str, build_mode: int):
"""
Add a new project for testing: build it and add to the Project Map file.
:param name: is a short string used to identify a project.
"""
project_info = SATestBuild.ProjectInfo(name,
build_mode,
is_reference_build=True)
tester = SATestBuild.ProjectTester(project_info)
project_dir = tester.get_project_dir()
if not os.path.exists(project_dir):
print(f"Error: Project directory is missing: {project_dir}")
sys.exit(-1)
# Build the project.
tester.test()
# Add the project name to the project map.
project_map_path = SATestBuild.get_project_map_path(should_exist=False)
if os.path.exists(project_map_path):
file_mode = "r+"
else:
print("Warning: Creating the project map file!")
file_mode = "w+"
with open(project_map_path, file_mode) as map_file:
if is_existing_project(map_file, name):
print(f"Warning: Project with name '{name}' already exists.",
file=sys.stdout)
print("Reference output has been regenerated.", file=sys.stdout)
else:
map_writer = csv.writer(map_file)
map_writer.writerow((name, build_mode))
print(f"The project map is updated: {project_map_path}")
def build(parser, args):
import SATestBuild
SATestBuild.VERBOSE = args.verbose
projects = get_projects(parser, args.projects)
tester = SATestBuild.RegressionTester(args.jobs, projects,
args.override_compiler,
args.extra_analyzer_config,
args.regenerate, args.strictness)
tests_passed = tester.test_all()
if not tests_passed:
sys.stderr.write("ERROR: Tests failed.\n")
sys.exit(42)
def addNewProject(ID, BuildMode):
"""
Add a new project for testing: build it and add to the Project Map file.
:param ID: is a short string used to identify a project.
"""
CurDir = os.path.abspath(os.curdir)
Dir = SATestBuild.getProjectDir(ID)
if not os.path.exists(Dir):
print("Error: Project directory is missing: %s" % Dir)
sys.exit(-1)
# Build the project.
# TODO: Repair this call. We give it a wrong amount wrong arguments and it
# is not trivial to construct argparse arguments in here.
# Requires refactoring of the 'testProject' function.
SATestBuild.testProject(ID, BuildMode, IsReferenceBuild=True)
# Add the project ID to the project map.
ProjectMapPath = os.path.join(CurDir, SATestBuild.ProjectMapFile)
if os.path.exists(ProjectMapPath):
FileMode = "r+"
else:
print("Warning: Creating the Project Map file!!")
FileMode = "w+"
with open(ProjectMapPath, FileMode) as PMapFile:
if (isExistingProject(PMapFile, ID)):
print('Warning: Project with ID \'', ID,
'\' already exists.', file=sys.stdout)
print("Reference output has been regenerated.", file=sys.stdout)
else:
PMapWriter = csv.writer(PMapFile)
PMapWriter.writerow((ID, int(BuildMode)))
print("The project map is updated: ", ProjectMapPath)
