def test_dock(self):
reg = registry_tests.small_testing_registry()
reg = QtWidgetRegistry(reg, parent=self.app)
toolbox = WidgetToolBox()
toolbox.setObjectName("widgets-toolbox")
toolbox.setModel(reg.model())
text = QTextEdit()
splitter = QSplitter()
splitter.setOrientation(Qt.Vertical)
splitter.addWidget(toolbox)
splitter.addWidget(text)
dock = CollapsibleDockWidget()
dock.setExpandedWidget(splitter)
toolbar = QToolBar()
toolbar.addAction("1")
toolbar.setOrientation(Qt.Vertical)
toolbar.setMovable(False)
toolbar.setFloatable(False)
dock.setCollapsedWidget(toolbar)
dock.show()
self.qWait()
def test(self):
lv = QListView()
mw = QMainWindow()
# Add two tool bars, the shadow should extend over them.
mw.addToolBar(Qt.BottomToolBarArea, QToolBar())
mw.addToolBar(Qt.TopToolBarArea, QToolBar())
mw.setCentralWidget(lv)
f = dropshadow.DropShadowFrame(color=Qt.blue, radius=20)
f.setWidget(lv)
self.assertIs(f.parentWidget(), mw)
self.assertIs(f.widget(), lv)
mw.show()
canim = QPropertyAnimation(
f, b"color_", f,
startValue=QColor(Qt.red), endValue=QColor(Qt.blue),
loopCount=-1, duration=2000
)
canim.start()
ranim = QPropertyAnimation(
f, b"radius_", f, startValue=30, endValue=40, loopCount=-1,
duration=3000
)
ranim.start()
self.app.exec_()
def test_dock(self):
reg = global_registry()
reg = QtWidgetRegistry(reg, parent=self.app)
toolbox = WidgetToolBox()
toolbox.setObjectName("widgets-toolbox")
toolbox.setModel(reg.model())
text = QTextEdit()
splitter = QSplitter()
splitter.setOrientation(Qt.Vertical)
splitter.addWidget(toolbox)
splitter.addWidget(text)
dock = CollapsibleDockWidget()
dock.setExpandedWidget(splitter)
toolbar = QToolBar()
toolbar.addAction("1")
toolbar.setOrientation(Qt.Vertical)
toolbar.setMovable(False)
toolbar.setFloatable(False)
dock.setCollapsedWidget(toolbar)
dock.show()
self.app.exec_()
def test(self):
lv = QListView()
mw = QMainWindow()
# Add two tool bars, the shadow should extend over them.
mw.addToolBar(Qt.BottomToolBarArea, QToolBar())
mw.addToolBar(Qt.TopToolBarArea, QToolBar())
mw.setCentralWidget(lv)
f = dropshadow.DropShadowFrame(color=Qt.blue, radius=20)
f.setWidget(lv)
self.assertIs(f.parentWidget(), mw)
self.assertIs(f.widget(), lv)
mw.show()
self.app.processEvents()
self.singleShot(3000, lambda: f.setColor(Qt.red))
self.singleShot(4000, lambda: f.setRadius(30))
self.singleShot(5000, lambda: f.setRadius(40))
self.app.exec_()
def sizeHint(self):
hint = QToolBar.sizeHint(self)
width, height = hint.width(), hint.height()
dx1, dy1, dw1, dh1 = self.getContentsMargins()
dx2, dy2, dw2, dh2 = self.layout().getContentsMargins()
dx, dy = dx1 + dx2, dy1 + dy2
dw, dh = dw1 + dw2, dh1 + dh2
count = len(self.actions())
spacing = self.layout().spacing()
space_spacing = max(count - 1, 0) * spacing
if self.orientation() == Qt.Horizontal:
width = int(height * 1.618) * count + space_spacing + dw + dx
else:
height = int(width * 1.618) * count + space_spacing + dh + dy
return QSize(width, height)
def sizeHint(self):
hint = QToolBar.sizeHint(self)
width, height = hint.width(), hint.height()
dx1, dy1, dw1, dh1 = self.getContentsMargins()
dx2, dy2, dw2, dh2 = self.layout().getContentsMargins()
dx, dy = dx1 + dx2, dy1 + dy2
dw, dh = dw1 + dw2, dh1 + dh2
count = len(self.actions())
spacing = self.layout().spacing()
space_spacing = max(count - 1, 0) * spacing
if self.orientation() == Qt.Horizontal:
width = int(height * 1.618) * count + space_spacing + dw + dx
else:
height = int(width * 1.618) * count + space_spacing + dh + dy
return QSize(width, height)
def actionEvent(self, event):
QToolBar.actionEvent(self, event)
if event.type() == QEvent.ActionAdded or \
event.type() == QEvent.ActionRemoved:
self.__layout(self.size())
def resizeEvent(self, event):
QToolBar.resizeEvent(self, event)
size = event.size()
self.__layout(size)
def __init__(self, parent=None, *args, **kwargs):
QToolBar.__init__(self, *args, **kwargs)
def _tods_run(self):
self.run_pipeline_action = QAction(
self.tr("Run"),
self,
objectName="run-action",
toolTip=self.tr("Run Pipeline"),
triggered=self.run_pipeline,
)
self.build_pipeline_action = QAction(
self.tr("Build"),
self,
objectName="build-action",
toolTip=self.tr("Build Pipeline"),
triggered=self.run_pipeline,
)
# self.zoom_in_action.setIcon(canvas_icons("arrow-right.svg"))
# self.welcome_action.setIcon(canvas_icons("arrow-right.svg"))
self.run_pipeline_action.setIcon(canvas_icons("arrow-right.svg"))
self.build_pipeline_action.setIcon(canvas_icons("default-widget.svg"))
dock_actions = [
self.show_properties_action,
self.canvas_align_to_grid_action,
self.canvas_text_action,
self.canvas_arrow_action,
self.freeze_action,
self.dock_help_action,
# self.zoom_in_action,
# self.welcome_action,
self.build_pipeline_action,
self.run_pipeline_action,
]
# Tool bar in the collapsed dock state (has the same actions as
# the tool bar in the CanvasToolDock
actions_toolbar = QToolBar(orientation=Qt.Vertical)
actions_toolbar.setFixedWidth(38)
actions_toolbar.layout().setSpacing(0)
actions_toolbar.setToolButtonStyle(Qt.ToolButtonIconOnly)
for action in dock_actions:
self.canvas_toolbar.addAction(action)
button = self.canvas_toolbar.widgetForAction(action)
button.setPopupMode(QToolButton.DelayedPopup)
actions_toolbar.addAction(action)
button = actions_toolbar.widgetForAction(action)
button.setFixedSize(38, 30)
button.setPopupMode(QToolButton.DelayedPopup)
def resizeEvent(self, event):
QToolBar.resizeEvent(self, event)
size = event.size()
self.__layout(size)
class UserSettingsDialog(QMainWindow):
"""
A User Settings/Defaults dialog.
"""
MAC_UNIFIED = True
def __init__(self, parent=None, **kwargs):
super().__init__(parent, **kwargs)
self.setWindowFlags(Qt.Dialog)
self.setWindowModality(Qt.ApplicationModal)
self.layout().setSizeConstraint(QVBoxLayout.SetFixedSize)
self.__macUnified = sys.platform == "darwin" and self.MAC_UNIFIED
self._manager = BindingManager(self,
submitPolicy=BindingManager.AutoSubmit)
self.__loop = None
self.__settings = config.settings()
self.__setupUi()
def __setupUi(self):
"""Set up the UI.
"""
if self.__macUnified:
self.tab = QToolBar(
floatable=False, movable=False, allowedAreas=Qt.TopToolBarArea,
)
self.addToolBar(Qt.TopToolBarArea, self.tab)
self.setUnifiedTitleAndToolBarOnMac(True)
# This does not seem to work
self.setWindowFlags(self.windowFlags() & \
~Qt.MacWindowToolBarButtonHint)
self.tab.actionTriggered[QAction].connect(
self.__macOnToolBarAction
)
central = QStackedWidget()
central.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
else:
self.tab = central = QTabWidget(self)
# Add a close button to the bottom of the dialog
# (to satisfy GNOME 3 which shows the dialog without a title bar).
container = container_widget_helper()
container.layout().addWidget(central)
buttonbox = QDialogButtonBox(QDialogButtonBox.Close)
buttonbox.rejected.connect(self.close)
container.layout().addWidget(buttonbox)
self.setCentralWidget(container)
self.stack = central
# General Tab
tab = QWidget()
self.addTab(tab, self.tr("General"),
toolTip=self.tr("General Options"))
form = QFormLayout()
tab.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
nodes = QWidget(self, objectName="nodes")
nodes.setLayout(QVBoxLayout())
nodes.layout().setContentsMargins(0, 0, 0, 0)
cb_anim = QCheckBox(
self.tr("Enable node animations"),
objectName="enable-node-animations",
toolTip=self.tr("Enable shadow and ping animations for nodes "
"in the workflow.")
)
self.bind(cb_anim, "checked", "schemeedit/enable-node-animations")
nodes.layout().addWidget(cb_anim)
form.addRow(self.tr("Nodes"), nodes)
links = QWidget(self, objectName="links")
links.setLayout(QVBoxLayout())
links.layout().setContentsMargins(0, 0, 0, 0)
cb_show = QCheckBox(
self.tr("Show channel names between widgets"),
objectName="show-channel-names",
toolTip=self.tr("Show source and sink channel names "
"over the links.")
)
self.bind(cb_show, "checked", "schemeedit/show-channel-names")
links.layout().addWidget(cb_show)
form.addRow(self.tr("Links"), links)
quickmenu = QWidget(self, objectName="quickmenu-options")
quickmenu.setLayout(QVBoxLayout())
quickmenu.layout().setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("On double click"),
toolTip=self.tr("Open quick menu on a double click "
"on an empty spot in the canvas"))
cb2 = QCheckBox(self.tr("On right click"),
toolTip=self.tr("Open quick menu on a right click "
"on an empty spot in the canvas"))
cb3 = QCheckBox(self.tr("On space key press"),
toolTip=self.tr("On Space key press while the mouse"
"is hovering over the canvas."))
cb4 = QCheckBox(self.tr("On any key press"),
toolTip=self.tr("On any key press while the mouse"
"is hovering over the canvas."))
self.bind(cb1, "checked", "quickmenu/trigger-on-double-click")
self.bind(cb2, "checked", "quickmenu/trigger-on-right-click")
self.bind(cb3, "checked", "quickmenu/trigger-on-space-key")
self.bind(cb4, "checked", "quickmenu/trigger-on-any-key")
quickmenu.layout().addWidget(cb1)
quickmenu.layout().addWidget(cb2)
quickmenu.layout().addWidget(cb3)
quickmenu.layout().addWidget(cb4)
form.addRow(self.tr("Open quick menu on"), quickmenu)
startup = QWidget(self, objectName="startup-group")
startup.setLayout(QVBoxLayout())
startup.layout().setContentsMargins(0, 0, 0, 0)
cb_splash = QCheckBox(self.tr("Show splash screen"), self,
objectName="show-splash-screen")
cb_welcome = QCheckBox(self.tr("Show welcome screen"), self,
objectName="show-welcome-screen")
self.bind(cb_splash, "checked", "startup/show-splash-screen")
self.bind(cb_welcome, "checked", "startup/show-welcome-screen")
startup.layout().addWidget(cb_splash)
startup.layout().addWidget(cb_welcome)
form.addRow(self.tr("On startup"), startup)
toolbox = QWidget(self, objectName="toolbox-group")
toolbox.setLayout(QVBoxLayout())
toolbox.layout().setContentsMargins(0, 0, 0, 0)
exclusive = QCheckBox(self.tr("Only one tab can be open at a time"))
self.bind(exclusive, "checked", "mainwindow/toolbox-dock-exclusive")
toolbox.layout().addWidget(exclusive)
form.addRow(self.tr("Tool box"), toolbox)
tab.setLayout(form)
# Output Tab
tab = QWidget()
self.addTab(tab, self.tr("Output"),
toolTip="Output Redirection")
form = QFormLayout()
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
combo = QComboBox()
combo.addItems([self.tr("Critical"),
self.tr("Error"),
self.tr("Warn"),
self.tr("Info"),
self.tr("Debug")])
self.bind(combo, "currentIndex", "logging/level")
layout.addWidget(combo)
box.setLayout(layout)
form.addRow(self.tr("Logging"), box)
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("Open in external browser"),
objectName="open-in-external-browser")
self.bind(cb1, "checked", "help/open-in-external-browser")
layout.addWidget(cb1)
box.setLayout(layout)
form.addRow(self.tr("Help window"), box)
tab.setLayout(form)
# Categories Tab
tab = QWidget()
layout = QVBoxLayout()
view = QListView(
editTriggers=QListView.NoEditTriggers
)
from .. import registry
reg = registry.global_registry()
model = QStandardItemModel()
settings = QSettings()
for cat in reg.categories():
item = QStandardItem()
item.setText(cat.name)
item.setCheckable(True)
visible, _ = category_state(cat, settings)
item.setCheckState(Qt.Checked if visible else Qt.Unchecked)
model.appendRow([item])
view.setModel(model)
layout.addWidget(view)
tab.setLayout(layout)
model.itemChanged.connect(
lambda item:
save_category_state(
reg.category(str(item.text())),
_State(item.checkState() == Qt.Checked, -1),
settings
)
)
self.addTab(tab, "Categories")
# Add-ons Tab
tab = QWidget()
self.addTab(tab, self.tr("Add-ons"),
toolTip="Settings related to add-on installation")
form = QFormLayout()
conda = QWidget(self, objectName="conda-group")
conda.setLayout(QVBoxLayout())
conda.layout().setContentsMargins(0, 0, 0, 0)
cb_conda_install = QCheckBox(self.tr("Install add-ons with conda"), self,
objectName="allow-conda-experimental")
self.bind(cb_conda_install, "checked", "add-ons/allow-conda-experimental")
conda.layout().addWidget(cb_conda_install)
form.addRow(self.tr("Conda"), conda)
form.addRow(self.tr("Pip"), QLabel("Pip install arguments:"))
line_edit_pip = QLineEdit()
self.bind(line_edit_pip, "text", "add-ons/pip-install-arguments")
form.addRow("", line_edit_pip)
tab.setLayout(form)
# Network Tab
tab = QWidget()
self.addTab(tab, self.tr("Network"),
toolTip="Settings related to networking")
form = QFormLayout()
line_edit_http_proxy = QLineEdit()
self.bind(line_edit_http_proxy, "text", "network/http-proxy")
form.addRow("HTTP proxy:", line_edit_http_proxy)
line_edit_https_proxy = QLineEdit()
self.bind(line_edit_https_proxy, "text", "network/https-proxy")
form.addRow("HTTPS proxy:", line_edit_https_proxy)
tab.setLayout(form)
if self.__macUnified:
# Need some sensible size otherwise mac unified toolbar 'takes'
# the space that should be used for layout of the contents
self.adjustSize()
def addTab(self, widget, text, toolTip=None, icon=None):
if self.__macUnified:
action = QAction(text, self)
if toolTip:
action.setToolTip(toolTip)
if icon:
action.setIcon(toolTip)
action.setData(len(self.tab.actions()))
self.tab.addAction(action)
self.stack.addWidget(widget)
else:
i = self.tab.addTab(widget, text)
if toolTip:
self.tab.setTabToolTip(i, toolTip)
if icon:
self.tab.setTabIcon(i, icon)
def widget(self, index):
if self.__macUnified:
return self.stack.widget(index)
else:
return self.tab.widget(index)
def keyPressEvent(self, event):
if event.key() == Qt.Key_Escape:
self.hide()
self.deleteLater()
def bind(self, source, source_property, key, transformer=None):
target = UserDefaultsPropertyBinding(self.__settings, key)
source = PropertyBinding(source, source_property)
source.set(target.get())
self._manager.bind(target, source)
def commit(self):
self._manager.commit()
def revert(self):
self._manager.revert()
def reset(self):
for target, source in self._manager.bindings():
try:
source.reset()
except NotImplementedError:
# Cannot reset.
pass
except Exception:
log.error("Error reseting %r", source.propertyName,
exc_info=True)
def exec_(self):
self.__loop = QEventLoop()
self.show()
status = self.__loop.exec_()
self.__loop = None
refresh_proxies()
return status
def hideEvent(self, event):
super().hideEvent(event)
if self.__loop is not None:
self.__loop.exit(0)
self.__loop = None
def __macOnToolBarAction(self, action):
index = action.data()
self.stack.setCurrentIndex(index)
def __setupUi(self):
"""Set up the UI.
"""
if self.__macUnified:
self.tab = QToolBar(
floatable=False,
movable=False,
allowedAreas=Qt.TopToolBarArea,
)
self.addToolBar(Qt.TopToolBarArea, self.tab)
self.setUnifiedTitleAndToolBarOnMac(True)
# This does not seem to work
self.setWindowFlags(self.windowFlags() & \
~Qt.MacWindowToolBarButtonHint)
self.tab.actionTriggered[QAction].connect(
self.__macOnToolBarAction)
central = QStackedWidget()
central.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
else:
self.tab = central = QTabWidget(self)
# Add a close button to the bottom of the dialog
# (to satisfy GNOME 3 which shows the dialog without a title bar).
container = container_widget_helper()
container.layout().addWidget(central)
buttonbox = QDialogButtonBox(QDialogButtonBox.Close)
buttonbox.rejected.connect(self.close)
container.layout().addWidget(buttonbox)
self.setCentralWidget(container)
self.stack = central
# General Tab
tab = QWidget()
self.addTab(tab,
self.tr("General"),
toolTip=self.tr("General Options"))
form = FormLayout()
tab.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
nodes = QWidget(self, objectName="nodes")
nodes.setLayout(QVBoxLayout())
nodes.layout().setContentsMargins(0, 0, 0, 0)
cb_anim = QCheckBox(self.tr("Enable node animations"),
objectName="enable-node-animations",
toolTip=self.tr(
"Enable shadow and ping animations for nodes "
"in the workflow."))
self.bind(cb_anim, "checked", "schemeedit/enable-node-animations")
nodes.layout().addWidget(cb_anim)
form.addRow(self.tr("Nodes"), nodes)
links = QWidget(self, objectName="links")
links.setLayout(QVBoxLayout())
links.layout().setContentsMargins(0, 0, 0, 0)
cb_show = QCheckBox(self.tr("Show channel names between widgets"),
objectName="show-channel-names",
toolTip=self.tr(
"Show source and sink channel names "
"over the links."))
self.bind(cb_show, "checked", "schemeedit/show-channel-names")
links.layout().addWidget(cb_show)
form.addRow(self.tr("Links"), links)
quickmenu = QWidget(self, objectName="quickmenu-options")
quickmenu.setLayout(QVBoxLayout())
quickmenu.layout().setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("Open on double click"),
toolTip=self.tr("Open quick menu on a double click "
"on an empty spot in the canvas"))
cb2 = QCheckBox(self.tr("Open on right click"),
toolTip=self.tr("Open quick menu on a right click "
"on an empty spot in the canvas"))
cb3 = QCheckBox(self.tr("Open on space key press"),
toolTip=self.tr(
"Open quick menu on Space key press "
"while the mouse is hovering over the canvas."))
cb4 = QCheckBox(self.tr("Open on any key press"),
toolTip=self.tr(
"Open quick menu on any key press "
"while the mouse is hovering over the canvas."))
cb5 = QCheckBox(self.tr("Show categories"),
toolTip=self.tr(
"In addition to searching, allow filtering "
"by categories."))
self.bind(cb1, "checked", "quickmenu/trigger-on-double-click")
self.bind(cb2, "checked", "quickmenu/trigger-on-right-click")
self.bind(cb3, "checked", "quickmenu/trigger-on-space-key")
self.bind(cb4, "checked", "quickmenu/trigger-on-any-key")
self.bind(cb5, "checked", "quickmenu/show-categories")
quickmenu.layout().addWidget(cb1)
quickmenu.layout().addWidget(cb2)
quickmenu.layout().addWidget(cb3)
quickmenu.layout().addWidget(cb4)
quickmenu.layout().addWidget(cb5)
form.addRow(self.tr("Quick menu"), quickmenu)
startup = QWidget(self, objectName="startup-group")
startup.setLayout(QVBoxLayout())
startup.layout().setContentsMargins(0, 0, 0, 0)
cb_splash = QCheckBox(self.tr("Show splash screen"),
self,
objectName="show-splash-screen")
cb_welcome = QCheckBox(self.tr("Show welcome screen"),
self,
objectName="show-welcome-screen")
cb_crash = QCheckBox(self.tr("Load crashed scratch workflows"),
self,
objectName="load-crashed-workflows")
self.bind(cb_splash, "checked", "startup/show-splash-screen")
self.bind(cb_welcome, "checked", "startup/show-welcome-screen")
self.bind(cb_crash, "checked", "startup/load-crashed-workflows")
startup.layout().addWidget(cb_splash)
startup.layout().addWidget(cb_welcome)
startup.layout().addWidget(cb_crash)
form.addRow(self.tr("On startup"), startup)
toolbox = QWidget(self, objectName="toolbox-group")
toolbox.setLayout(QVBoxLayout())
toolbox.layout().setContentsMargins(0, 0, 0, 0)
exclusive = QCheckBox(self.tr("Only one tab can be open at a time"))
self.bind(exclusive, "checked", "mainwindow/toolbox-dock-exclusive")
toolbox.layout().addWidget(exclusive)
form.addRow(self.tr("Tool box"), toolbox)
tab.setLayout(form)
# Style tab
tab = StyleConfigWidget()
self.addTab(tab, self.tr("&Style"), toolTip="Application style")
self.bind(tab, "selectedStyle_", "application-style/style-name")
self.bind(tab, "selectedPalette_", "application-style/palette")
# Output Tab
tab = QWidget()
self.addTab(tab, self.tr("Output"), toolTip="Output Redirection")
form = FormLayout()
combo = QComboBox()
combo.addItems([
self.tr("Critical"),
self.tr("Error"),
self.tr("Warn"),
self.tr("Info"),
self.tr("Debug")
])
self.bind(combo, "currentIndex", "logging/level")
form.addRow(self.tr("Logging"), combo)
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("Open in external browser"),
objectName="open-in-external-browser")
self.bind(cb1, "checked", "help/open-in-external-browser")
layout.addWidget(cb1)
box.setLayout(layout)
form.addRow(self.tr("Help window"), box)
tab.setLayout(form)
# Categories Tab
tab = QWidget()
layout = QVBoxLayout()
view = QListView(editTriggers=QListView.NoEditTriggers)
from .. import registry
reg = registry.global_registry()
model = QStandardItemModel()
settings = QSettings()
for cat in reg.categories():
item = QStandardItem()
item.setText(cat.name)
item.setCheckable(True)
visible, _ = category_state(cat, settings)
item.setCheckState(Qt.Checked if visible else Qt.Unchecked)
model.appendRow([item])
view.setModel(model)
layout.addWidget(view)
tab.setLayout(layout)
model.itemChanged.connect(lambda item: save_category_state(
reg.category(str(item.text())),
_State(item.checkState() == Qt.Checked, -1), settings))
self.addTab(tab, "Categories")
# Add-ons Tab
tab = QWidget()
self.addTab(tab,
self.tr("Add-ons"),
toolTip="Settings related to add-on installation")
form = FormLayout()
conda = QWidget(self, objectName="conda-group")
conda.setLayout(QVBoxLayout())
conda.layout().setContentsMargins(0, 0, 0, 0)
cb_conda_install = QCheckBox(self.tr("Install add-ons with conda"),
self,
objectName="allow-conda")
self.bind(cb_conda_install, "checked", "add-ons/allow-conda")
conda.layout().addWidget(cb_conda_install)
form.addRow(self.tr("Conda"), conda)
form.addRow(self.tr("Pip"), QLabel("Pip install arguments:"))
line_edit_pip = QLineEdit()
self.bind(line_edit_pip, "text", "add-ons/pip-install-arguments")
form.addRow("", line_edit_pip)
tab.setLayout(form)
# Network Tab
tab = QWidget()
self.addTab(tab,
self.tr("Network"),
toolTip="Settings related to networking")
form = FormLayout()
line_edit_http_proxy = QLineEdit()
self.bind(line_edit_http_proxy, "text", "network/http-proxy")
form.addRow("HTTP proxy:", line_edit_http_proxy)
line_edit_https_proxy = QLineEdit()
self.bind(line_edit_https_proxy, "text", "network/https-proxy")
form.addRow("HTTPS proxy:", line_edit_https_proxy)
tab.setLayout(form)
if self.__macUnified:
# Need some sensible size otherwise mac unified toolbar 'takes'
# the space that should be used for layout of the contents
self.adjustSize()
def __setupUi(self):
"""Set up the UI.
"""
if self.__macUnified:
self.tab = QToolBar()
self.addToolBar(Qt.TopToolBarArea, self.tab)
self.setUnifiedTitleAndToolBarOnMac(True)
# This does not seem to work
self.setWindowFlags(self.windowFlags() & \
~Qt.MacWindowToolBarButtonHint)
self.tab.actionTriggered[QAction].connect(
self.__macOnToolBarAction
)
central = QStackedWidget()
central.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
else:
self.tab = central = QTabWidget(self)
self.stack = central
self.setCentralWidget(central)
# General Tab
tab = QWidget()
self.addTab(tab, self.tr("General"),
toolTip=self.tr("General Options"))
form = QFormLayout()
tab.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
nodes = QWidget(self, objectName="nodes")
nodes.setLayout(QVBoxLayout())
nodes.layout().setContentsMargins(0, 0, 0, 0)
cb_anim = QCheckBox(
self.tr("Enable node animations"),
objectName="enable-node-animations",
toolTip=self.tr("Enable shadow and ping animations for nodes "
"in the workflow.")
)
self.bind(cb_anim, "checked", "schemeedit/enable-node-animations")
nodes.layout().addWidget(cb_anim)
form.addRow(self.tr("Nodes"), nodes)
links = QWidget(self, objectName="links")
links.setLayout(QVBoxLayout())
links.layout().setContentsMargins(0, 0, 0, 0)
cb_show = QCheckBox(
self.tr("Show channel names between widgets"),
objectName="show-channel-names",
toolTip=self.tr("Show source and sink channel names "
"over the links.")
)
self.bind(cb_show, "checked", "schemeedit/show-channel-names")
links.layout().addWidget(cb_show)
form.addRow(self.tr("Links"), links)
quickmenu = QWidget(self, objectName="quickmenu-options")
quickmenu.setLayout(QVBoxLayout())
quickmenu.layout().setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("On double click"),
toolTip=self.tr("Open quick menu on a double click "
"on an empty spot in the canvas"))
cb2 = QCheckBox(self.tr("On right click"),
toolTip=self.tr("Open quick menu on a right click "
"on an empty spot in the canvas"))
cb3 = QCheckBox(self.tr("On space key press"),
toolTip=self.tr("On Space key press while the mouse"
"is hovering over the canvas."))
cb4 = QCheckBox(self.tr("On any key press"),
toolTip=self.tr("On any key press while the mouse"
"is hovering over the canvas."))
self.bind(cb1, "checked", "quickmenu/trigger-on-double-click")
self.bind(cb2, "checked", "quickmenu/trigger-on-right-click")
self.bind(cb3, "checked", "quickmenu/trigger-on-space-key")
self.bind(cb4, "checked", "quickmenu/trigger-on-any-key")
quickmenu.layout().addWidget(cb1)
quickmenu.layout().addWidget(cb2)
quickmenu.layout().addWidget(cb3)
quickmenu.layout().addWidget(cb4)
form.addRow(self.tr("Open quick menu on"), quickmenu)
startup = QWidget(self, objectName="startup-group")
startup.setLayout(QVBoxLayout())
startup.layout().setContentsMargins(0, 0, 0, 0)
cb_splash = QCheckBox(self.tr("Show splash screen"), self,
objectName="show-splash-screen")
cb_welcome = QCheckBox(self.tr("Show welcome screen"), self,
objectName="show-welcome-screen")
cb_updates = QCheckBox(self.tr("Check for updates"), self,
objectName="check-updates")
self.bind(cb_splash, "checked", "startup/show-splash-screen")
self.bind(cb_welcome, "checked", "startup/show-welcome-screen")
self.bind(cb_updates, "checked", "startup/check-updates")
startup.layout().addWidget(cb_splash)
startup.layout().addWidget(cb_welcome)
startup.layout().addWidget(cb_updates)
form.addRow(self.tr("On startup"), startup)
toolbox = QWidget(self, objectName="toolbox-group")
toolbox.setLayout(QVBoxLayout())
toolbox.layout().setContentsMargins(0, 0, 0, 0)
exclusive = QCheckBox(self.tr("Only one tab can be open at a time"))
self.bind(exclusive, "checked", "mainwindow/toolbox-dock-exclusive")
toolbox.layout().addWidget(exclusive)
form.addRow(self.tr("Tool box"), toolbox)
tab.setLayout(form)
# Output Tab
tab = QWidget()
self.addTab(tab, self.tr("Output"),
toolTip="Output Redirection")
form = QFormLayout()
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
combo = QComboBox()
combo.addItems([self.tr("Critical"),
self.tr("Error"),
self.tr("Warn"),
self.tr("Info"),
self.tr("Debug")])
self.bind(combo, "currentIndex", "logging/level")
layout.addWidget(combo)
box.setLayout(layout)
form.addRow(self.tr("Logging"), box)
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("Open in external browser"),
objectName="open-in-external-browser")
self.bind(cb1, "checked", "help/open-in-external-browser")
layout.addWidget(cb1)
box.setLayout(layout)
form.addRow(self.tr("Help window"), box)
tab.setLayout(form)
# Error Reporting Tab
tab = QWidget()
self.addTab(tab, self.tr("Error Reporting"),
toolTip="Settings related to error reporting")
form = QFormLayout()
line_edit_mid = QLineEdit()
self.bind(line_edit_mid, "text", "error-reporting/machine-id")
form.addRow("Machine ID:", line_edit_mid)
tab.setLayout(form)
# Add-ons Tab
tab = QWidget()
self.addTab(tab, self.tr("Add-ons"),
toolTip="Settings related to add-on installation")
form = QFormLayout()
conda = QWidget(self, objectName="conda-group")
conda.setLayout(QVBoxLayout())
conda.layout().setContentsMargins(0, 0, 0, 0)
cb_conda_install = QCheckBox(self.tr("Install add-ons with conda"), self,
objectName="allow-conda-experimental")
self.bind(cb_conda_install, "checked", "add-ons/allow-conda-experimental")
conda.layout().addWidget(cb_conda_install)
form.addRow(self.tr("Conda"), conda)
tab.setLayout(form)
if self.__macUnified:
# Need some sensible size otherwise mac unified toolbar 'takes'
# the space that should be used for layout of the contents
self.adjustSize()
def actionEvent(self, event):
QToolBar.actionEvent(self, event)
if event.type() == QEvent.ActionAdded or \
event.type() == QEvent.ActionRemoved:
self.__layout(self.size())
def __setupUi(self):
"""Set up the UI.
"""
if self.__macUnified:
self.tab = QToolBar()
self.addToolBar(Qt.TopToolBarArea, self.tab)
self.setUnifiedTitleAndToolBarOnMac(True)
# This does not seem to work
self.setWindowFlags(self.windowFlags() & \
~Qt.MacWindowToolBarButtonHint)
self.tab.actionTriggered[QAction].connect(
self.__macOnToolBarAction)
central = QStackedWidget()
central.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
else:
self.tab = central = QTabWidget(self)
self.stack = central
self.setCentralWidget(central)
# General Tab
tab = QWidget()
self.addTab(tab, self.tr("通用"), toolTip=self.tr("通用选项"))
form = QFormLayout()
tab.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
nodes = QWidget(self, objectName="nodes")
nodes.setLayout(QVBoxLayout())
nodes.layout().setContentsMargins(0, 0, 0, 0)
cb_anim = QCheckBox(self.tr("启用节点动画"),
objectName="enable-node-animations",
toolTip=self.tr("启用数据挖掘流程中节点的阴影和动画"))
self.bind(cb_anim, "checked", "schemeedit/enable-node-animations")
nodes.layout().addWidget(cb_anim)
form.addRow(self.tr("节点"), nodes)
links = QWidget(self, objectName="links")
links.setLayout(QVBoxLayout())
links.layout().setContentsMargins(0, 0, 0, 0)
cb_show = QCheckBox(self.tr("显示部件之间的通道名称"),
objectName="show-channel-names",
toolTip=self.tr("在链接上显示来源和接收的通道名称。"))
self.bind(cb_show, "checked", "schemeedit/show-channel-names")
links.layout().addWidget(cb_show)
form.addRow(self.tr("连接"), links)
quickmenu = QWidget(self, objectName="quickmenu-options")
quickmenu.setLayout(QVBoxLayout())
quickmenu.layout().setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("双击"), toolTip=self.tr("双击画布空白处打开快捷菜单"))
cb2 = QCheckBox(self.tr("右击"), toolTip=self.tr("右击画布空白处打开快捷菜单"))
cb3 = QCheckBox(self.tr("按空格键"), toolTip=self.tr("鼠标停在画布上，按空格键打开快捷菜单"))
cb4 = QCheckBox(self.tr("按任意键"), toolTip=self.tr("鼠标停在画布上，按任意键打开快捷菜单"))
self.bind(cb1, "checked", "quickmenu/trigger-on-double-click")
self.bind(cb2, "checked", "quickmenu/trigger-on-right-click")
self.bind(cb3, "checked", "quickmenu/trigger-on-space-key")
self.bind(cb4, "checked", "quickmenu/trigger-on-any-key")
quickmenu.layout().addWidget(cb1)
quickmenu.layout().addWidget(cb2)
quickmenu.layout().addWidget(cb3)
quickmenu.layout().addWidget(cb4)
form.addRow(self.tr("打开快捷菜单"), quickmenu)
startup = QWidget(self, objectName="startup-group")
startup.setLayout(QVBoxLayout())
startup.layout().setContentsMargins(0, 0, 0, 0)
cb_splash = QCheckBox(self.tr("显示初始屏幕"),
self,
objectName="show-splash-screen")
cb_welcome = QCheckBox(self.tr("显示欢迎屏幕"),
self,
objectName="show-welcome-screen")
cb_updates = QCheckBox(self.tr("检查更新"),
self,
objectName="check-updates")
self.bind(cb_splash, "checked", "startup/show-splash-screen")
self.bind(cb_welcome, "checked", "startup/show-welcome-screen")
self.bind(cb_updates, "checked", "startup/check-updates")
startup.layout().addWidget(cb_splash)
startup.layout().addWidget(cb_welcome)
startup.layout().addWidget(cb_updates)
form.addRow(self.tr("启动"), startup)
toolbox = QWidget(self, objectName="toolbox-group")
toolbox.setLayout(QVBoxLayout())
toolbox.layout().setContentsMargins(0, 0, 0, 0)
exclusive = QCheckBox(self.tr("一次只能打开一个选项卡 "))
self.bind(exclusive, "checked", "mainwindow/toolbox-dock-exclusive")
toolbox.layout().addWidget(exclusive)
form.addRow(self.tr("工具箱"), toolbox)
tab.setLayout(form)
# Output Tab
tab = QWidget()
self.addTab(tab, self.tr("输出"), toolTip="输出重定向")
form = QFormLayout()
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
combo = QComboBox()
combo.addItems([
self.tr("Critical"),
self.tr("Error"),
self.tr("Warn"),
self.tr("Info"),
self.tr("Debug")
])
self.bind(combo, "currentIndex", "logging/level")
layout.addWidget(combo)
box.setLayout(layout)
form.addRow(self.tr("日志"), box)
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("用外部浏览器打开"),
objectName="open-in-external-browser")
self.bind(cb1, "checked", "help/open-in-external-browser")
layout.addWidget(cb1)
box.setLayout(layout)
form.addRow(self.tr("帮助"), box)
tab.setLayout(form)
# Error Reporting Tab
tab = QWidget()
self.addTab(tab, self.tr("错误报告"), toolTip="错误报告相关的设置")
form = QFormLayout()
line_edit_mid = QLineEdit()
self.bind(line_edit_mid, "text", "error-reporting/machine-id")
form.addRow("Machine ID:", line_edit_mid)
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(
self.tr(""),
toolTip=self.tr(
"Share anonymous usage statistics to improve Orange"))
self.bind(cb1, "checked", "error-reporting/send-statistics")
layout.addWidget(cb1)
box.setLayout(layout)
form.addRow(self.tr("共享匿名统计信息"), box)
tab.setLayout(form)
# Add-ons Tab
tab = QWidget()
self.addTab(tab, self.tr("附加"), toolTip="附加组件安装相关的设置")
form = QFormLayout()
conda = QWidget(self, objectName="conda-group")
conda.setLayout(QVBoxLayout())
conda.layout().setContentsMargins(0, 0, 0, 0)
cb_conda_install = QCheckBox(self.tr("Conda安装附加组件"),
self,
objectName="allow-conda")
self.bind(cb_conda_install, "checked", "add-ons/allow-conda")
conda.layout().addWidget(cb_conda_install)
form.addRow(self.tr("Conda"), conda)
form.addRow(self.tr("Pip"), QLabel("Pip安装参数:"))
line_edit_pip = QLineEdit()
self.bind(line_edit_pip, "text", "add-ons/pip-install-arguments")
form.addRow("", line_edit_pip)
tab.setLayout(form)
# Network Tab
tab = QWidget()
self.addTab(tab, self.tr("网络"), toolTip="网络相关的设置")
form = QFormLayout()
line_edit_http_proxy = QLineEdit()
self.bind(line_edit_http_proxy, "text", "network/http-proxy")
form.addRow("HTTP代理:", line_edit_http_proxy)
line_edit_https_proxy = QLineEdit()
self.bind(line_edit_https_proxy, "text", "network/https-proxy")
form.addRow("HTTPS代理:", line_edit_https_proxy)
tab.setLayout(form)
if self.__macUnified:
# Need some sensible size otherwise mac unified toolbar 'takes'
# the space that should be used for layout of the contents
self.adjustSize()
class UserSettingsDialog(QMainWindow):
"""
A User Settings/Defaults dialog.
"""
MAC_UNIFIED = True
def __init__(self, parent=None, **kwargs):
QMainWindow.__init__(self, parent, **kwargs)
self.setWindowFlags(Qt.Dialog)
self.setWindowModality(Qt.ApplicationModal)
self.layout().setSizeConstraint(QVBoxLayout.SetFixedSize)
self.__macUnified = sys.platform == "darwin" and self.MAC_UNIFIED
self._manager = BindingManager(self,
submitPolicy=BindingManager.AutoSubmit)
self.__loop = None
self.__settings = config.settings()
self.__setupUi()
def __setupUi(self):
"""Set up the UI.
"""
if self.__macUnified:
self.tab = QToolBar()
self.addToolBar(Qt.TopToolBarArea, self.tab)
self.setUnifiedTitleAndToolBarOnMac(True)
# This does not seem to work
self.setWindowFlags(self.windowFlags() & \
~Qt.MacWindowToolBarButtonHint)
self.tab.actionTriggered[QAction].connect(
self.__macOnToolBarAction)
central = QStackedWidget()
central.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
else:
self.tab = central = QTabWidget(self)
self.stack = central
self.setCentralWidget(central)
# General Tab
tab = QWidget()
self.addTab(tab, self.tr("通用"), toolTip=self.tr("通用选项"))
form = QFormLayout()
tab.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
nodes = QWidget(self, objectName="nodes")
nodes.setLayout(QVBoxLayout())
nodes.layout().setContentsMargins(0, 0, 0, 0)
cb_anim = QCheckBox(self.tr("启用节点动画"),
objectName="enable-node-animations",
toolTip=self.tr("启用数据挖掘流程中节点的阴影和动画"))
self.bind(cb_anim, "checked", "schemeedit/enable-node-animations")
nodes.layout().addWidget(cb_anim)
form.addRow(self.tr("节点"), nodes)
links = QWidget(self, objectName="links")
links.setLayout(QVBoxLayout())
links.layout().setContentsMargins(0, 0, 0, 0)
cb_show = QCheckBox(self.tr("显示部件之间的通道名称"),
objectName="show-channel-names",
toolTip=self.tr("在链接上显示来源和接收的通道名称。"))
self.bind(cb_show, "checked", "schemeedit/show-channel-names")
links.layout().addWidget(cb_show)
form.addRow(self.tr("连接"), links)
quickmenu = QWidget(self, objectName="quickmenu-options")
quickmenu.setLayout(QVBoxLayout())
quickmenu.layout().setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("双击"), toolTip=self.tr("双击画布空白处打开快捷菜单"))
cb2 = QCheckBox(self.tr("右击"), toolTip=self.tr("右击画布空白处打开快捷菜单"))
cb3 = QCheckBox(self.tr("按空格键"), toolTip=self.tr("鼠标停在画布上，按空格键打开快捷菜单"))
cb4 = QCheckBox(self.tr("按任意键"), toolTip=self.tr("鼠标停在画布上，按任意键打开快捷菜单"))
self.bind(cb1, "checked", "quickmenu/trigger-on-double-click")
self.bind(cb2, "checked", "quickmenu/trigger-on-right-click")
self.bind(cb3, "checked", "quickmenu/trigger-on-space-key")
self.bind(cb4, "checked", "quickmenu/trigger-on-any-key")
quickmenu.layout().addWidget(cb1)
quickmenu.layout().addWidget(cb2)
quickmenu.layout().addWidget(cb3)
quickmenu.layout().addWidget(cb4)
form.addRow(self.tr("打开快捷菜单"), quickmenu)
startup = QWidget(self, objectName="startup-group")
startup.setLayout(QVBoxLayout())
startup.layout().setContentsMargins(0, 0, 0, 0)
cb_splash = QCheckBox(self.tr("显示初始屏幕"),
self,
objectName="show-splash-screen")
cb_welcome = QCheckBox(self.tr("显示欢迎屏幕"),
self,
objectName="show-welcome-screen")
cb_updates = QCheckBox(self.tr("检查更新"),
self,
objectName="check-updates")
self.bind(cb_splash, "checked", "startup/show-splash-screen")
self.bind(cb_welcome, "checked", "startup/show-welcome-screen")
self.bind(cb_updates, "checked", "startup/check-updates")
startup.layout().addWidget(cb_splash)
startup.layout().addWidget(cb_welcome)
startup.layout().addWidget(cb_updates)
form.addRow(self.tr("启动"), startup)
toolbox = QWidget(self, objectName="toolbox-group")
toolbox.setLayout(QVBoxLayout())
toolbox.layout().setContentsMargins(0, 0, 0, 0)
exclusive = QCheckBox(self.tr("一次只能打开一个选项卡 "))
self.bind(exclusive, "checked", "mainwindow/toolbox-dock-exclusive")
toolbox.layout().addWidget(exclusive)
form.addRow(self.tr("工具箱"), toolbox)
tab.setLayout(form)
# Output Tab
tab = QWidget()
self.addTab(tab, self.tr("输出"), toolTip="输出重定向")
form = QFormLayout()
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
combo = QComboBox()
combo.addItems([
self.tr("Critical"),
self.tr("Error"),
self.tr("Warn"),
self.tr("Info"),
self.tr("Debug")
])
self.bind(combo, "currentIndex", "logging/level")
layout.addWidget(combo)
box.setLayout(layout)
form.addRow(self.tr("日志"), box)
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("用外部浏览器打开"),
objectName="open-in-external-browser")
self.bind(cb1, "checked", "help/open-in-external-browser")
layout.addWidget(cb1)
box.setLayout(layout)
form.addRow(self.tr("帮助"), box)
tab.setLayout(form)
# Error Reporting Tab
tab = QWidget()
self.addTab(tab, self.tr("错误报告"), toolTip="错误报告相关的设置")
form = QFormLayout()
line_edit_mid = QLineEdit()
self.bind(line_edit_mid, "text", "error-reporting/machine-id")
form.addRow("Machine ID:", line_edit_mid)
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(
self.tr(""),
toolTip=self.tr(
"Share anonymous usage statistics to improve Orange"))
self.bind(cb1, "checked", "error-reporting/send-statistics")
layout.addWidget(cb1)
box.setLayout(layout)
form.addRow(self.tr("共享匿名统计信息"), box)
tab.setLayout(form)
# Add-ons Tab
tab = QWidget()
self.addTab(tab, self.tr("附加"), toolTip="附加组件安装相关的设置")
form = QFormLayout()
conda = QWidget(self, objectName="conda-group")
conda.setLayout(QVBoxLayout())
conda.layout().setContentsMargins(0, 0, 0, 0)
cb_conda_install = QCheckBox(self.tr("Conda安装附加组件"),
self,
objectName="allow-conda")
self.bind(cb_conda_install, "checked", "add-ons/allow-conda")
conda.layout().addWidget(cb_conda_install)
form.addRow(self.tr("Conda"), conda)
form.addRow(self.tr("Pip"), QLabel("Pip安装参数:"))
line_edit_pip = QLineEdit()
self.bind(line_edit_pip, "text", "add-ons/pip-install-arguments")
form.addRow("", line_edit_pip)
tab.setLayout(form)
# Network Tab
tab = QWidget()
self.addTab(tab, self.tr("网络"), toolTip="网络相关的设置")
form = QFormLayout()
line_edit_http_proxy = QLineEdit()
self.bind(line_edit_http_proxy, "text", "network/http-proxy")
form.addRow("HTTP代理:", line_edit_http_proxy)
line_edit_https_proxy = QLineEdit()
self.bind(line_edit_https_proxy, "text", "network/https-proxy")
form.addRow("HTTPS代理:", line_edit_https_proxy)
tab.setLayout(form)
if self.__macUnified:
# Need some sensible size otherwise mac unified toolbar 'takes'
# the space that should be used for layout of the contents
self.adjustSize()
def addTab(self, widget, text, toolTip=None, icon=None):
if self.__macUnified:
action = QAction(text, self)
if toolTip:
action.setToolTip(toolTip)
if icon:
action.setIcon(toolTip)
action.setData(len(self.tab.actions()))
self.tab.addAction(action)
self.stack.addWidget(widget)
else:
i = self.tab.addTab(widget, text)
if toolTip:
self.tab.setTabToolTip(i, toolTip)
if icon:
self.tab.setTabIcon(i, icon)
def keyPressEvent(self, event):
if event.key() == Qt.Key_Escape:
self.hide()
self.deleteLater()
def bind(self, source, source_property, key, transformer=None):
target = UserDefaultsPropertyBinding(self.__settings, key)
source = PropertyBinding(source, source_property)
source.set(target.get())
self._manager.bind(target, source)
def commit(self):
self._manager.commit()
def revert(self):
self._manager.revert()
def reset(self):
for target, source in self._manager.bindings():
try:
source.reset()
except NotImplementedError:
# Cannot reset.
pass
except Exception:
log.error("Error reseting %r",
source.propertyName,
exc_info=True)
def exec_(self):
self.__loop = QEventLoop()
self.show()
status = self.__loop.exec_()
self.__loop = None
refresh_proxies()
return status
def hideEvent(self, event):
QMainWindow.hideEvent(self, event)
if self.__loop is not None:
self.__loop.exit(0)
self.__loop = None
def __macOnToolBarAction(self, action):
self.stack.setCurrentIndex(action.data())
def __setupUi(self):
"""Set up the UI.
"""
if self.__macUnified:
self.tab = QToolBar(
floatable=False, movable=False, allowedAreas=Qt.TopToolBarArea,
)
self.addToolBar(Qt.TopToolBarArea, self.tab)
self.setUnifiedTitleAndToolBarOnMac(True)
# This does not seem to work
self.setWindowFlags(self.windowFlags() & \
~Qt.MacWindowToolBarButtonHint)
self.tab.actionTriggered[QAction].connect(
self.__macOnToolBarAction
)
central = QStackedWidget()
central.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
else:
self.tab = central = QTabWidget(self)
# Add a close button to the bottom of the dialog
# (to satisfy GNOME 3 which shows the dialog without a title bar).
container = container_widget_helper()
container.layout().addWidget(central)
buttonbox = QDialogButtonBox(QDialogButtonBox.Close)
buttonbox.rejected.connect(self.close)
container.layout().addWidget(buttonbox)
self.setCentralWidget(container)
self.stack = central
# General Tab
tab = QWidget()
self.addTab(tab, self.tr("常规"),
toolTip=self.tr("常规选项"))
form = FormLayout()
tab.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
nodes = QWidget(self, objectName="nodes")
nodes.setLayout(QVBoxLayout())
nodes.layout().setContentsMargins(0, 0, 0, 0)
cb_anim = QCheckBox(
self.tr("启用节点动画"),
objectName="enable-node-animations",
toolTip=self.tr("为工作流中的节点启用阴影和ping动画。")
)
self.bind(cb_anim, "checked", "schemeedit/enable-node-animations")
nodes.layout().addWidget(cb_anim)
form.addRow(self.tr("结点"), nodes)
links = QWidget(self, objectName="links")
links.setLayout(QVBoxLayout())
links.layout().setContentsMargins(0, 0, 0, 0)
cb_show = QCheckBox(
self.tr("在窗口小部件之间显示通道名称"),
objectName="show-channel-names",
toolTip=self.tr("在链接上显示源和接收器通道名称。")
)
self.bind(cb_show, "checked", "schemeedit/show-channel-names")
links.layout().addWidget(cb_show)
form.addRow(self.tr("链接"), links)
quickmenu = QWidget(self, objectName="quickmenu-options")
quickmenu.setLayout(QVBoxLayout())
quickmenu.layout().setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("双击时打开"),
toolTip=self.tr("双击画布中的空白位置打开快捷菜单"))
cb2 = QCheckBox(self.tr("单击鼠标右键时打开"),
toolTip=self.tr("右键单击画布中的空白处打开快捷菜单"))
cb3 = QCheckBox(self.tr("按空格键时打开"),
toolTip=self.tr("当鼠标悬停在画布上时，按空格键。"))
cb4 = QCheckBox(self.tr("按任意按键时打开"),
toolTip=self.tr("当鼠标悬停在画布上时，按任意键。"))
cb5 = QCheckBox(self.tr("显示分类"),
toolTip=self.tr("In addition to searching, allow filtering "
"by categories."))
self.bind(cb1, "checked", "quickmenu/trigger-on-double-click")
self.bind(cb2, "checked", "quickmenu/trigger-on-right-click")
self.bind(cb3, "checked", "quickmenu/trigger-on-space-key")
self.bind(cb4, "checked", "quickmenu/trigger-on-any-key")
self.bind(cb5, "checked", "quickmenu/show-categories")
quickmenu.layout().addWidget(cb1)
quickmenu.layout().addWidget(cb2)
quickmenu.layout().addWidget(cb3)
quickmenu.layout().addWidget(cb4)
quickmenu.layout().addWidget(cb5)
form.addRow(self.tr("快捷菜单"), quickmenu)
startup = QWidget(self, objectName="startup-group")
startup.setLayout(QVBoxLayout())
startup.layout().setContentsMargins(0, 0, 0, 0)
cb_splash = QCheckBox(self.tr("显示启动画面"), self,
objectName="show-splash-screen")
cb_welcome = QCheckBox(self.tr("显示欢迎界面"), self,
objectName="show-welcome-screen")
cb_crash = QCheckBox(self.tr("加载崩溃的工作流"), self,
objectName="load-crashed-workflows")
self.bind(cb_splash, "checked", "startup/show-splash-screen")
self.bind(cb_welcome, "checked", "startup/show-welcome-screen")
self.bind(cb_crash, "checked", "startup/load-crashed-workflows")
startup.layout().addWidget(cb_splash)
startup.layout().addWidget(cb_welcome)
startup.layout().addWidget(cb_crash)
form.addRow(self.tr("启动时"), startup)
toolbox = QWidget(self, objectName="toolbox-group")
toolbox.setLayout(QVBoxLayout())
toolbox.layout().setContentsMargins(0, 0, 0, 0)
exclusive = QCheckBox(self.tr("一次只能打开一个选项卡"))
self.bind(exclusive, "checked", "mainwindow/toolbox-dock-exclusive")
toolbox.layout().addWidget(exclusive)
form.addRow(self.tr("工具箱"), toolbox)
tab.setLayout(form)
# Style tab
tab = StyleConfigWidget()
self.addTab(tab, self.tr("&Style"), toolTip="Application style")
self.bind(tab, "selectedStyle_", "application-style/style-name")
self.bind(tab, "selectedPalette_", "application-style/palette")
# Output Tab
tab = QWidget()
self.addTab(tab, self.tr("输出"),
toolTip="输出重定向")
form = FormLayout()
combo = QComboBox()
combo.addItems([self.tr("关键"),
self.tr("错误"),
self.tr("警告"),
self.tr("信息"),
self.tr("调试")])
self.bind(combo, "currentIndex", "logging/level")
form.addRow(self.tr("记录"), combo)
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("在外部浏览器中打开"),
objectName="open-in-external-browser")
self.bind(cb1, "checked", "help/open-in-external-browser")
layout.addWidget(cb1)
box.setLayout(layout)
form.addRow(self.tr("帮助窗口"), box)
tab.setLayout(form)
# Categories Tab
tab = QWidget()
layout = QVBoxLayout()
view = QListView(
editTriggers=QListView.NoEditTriggers
)
from .. import registry
reg = registry.global_registry()
model = QStandardItemModel()
settings = QSettings()
for cat in reg.categories():
item = QStandardItem()
item.setText(cat.name)
item.setCheckable(True)
visible, _ = category_state(cat, settings)
item.setCheckState(Qt.Checked if visible else Qt.Unchecked)
model.appendRow([item])
view.setModel(model)
layout.addWidget(view)
tab.setLayout(layout)
model.itemChanged.connect(
lambda item:
save_category_state(
reg.category(str(item.text())),
_State(item.checkState() == Qt.Checked, -1),
settings
)
)
self.addTab(tab, "类别")
# Add-ons Tab
tab = QWidget()
self.addTab(tab, self.tr("插件"),
toolTip="与插件安装相关的设置")
form = FormLayout()
conda = QWidget(self, objectName="conda-group")
conda.setLayout(QVBoxLayout())
conda.layout().setContentsMargins(0, 0, 0, 0)
mirror_install = QCheckBox(self.tr("使用国内镜像安装"), self,
objectName="allow-conda")
self.bind(mirror_install, "checked", "add-ons/allow-conda")
conda.layout().addWidget(mirror_install)
form.addRow(self.tr("镜像"), conda)
form.addRow(self.tr("Pip"), QLabel("Pip 安装参数:"))
line_edit_pip = QLineEdit()
# line_edit_pip.setText('-i https://mirrors.aliyun.com/pypi/simple')
self.bind(line_edit_pip, "text", "add-ons/pip-install-arguments")
form.addRow("", line_edit_pip)
tab.setLayout(form)
# Network Tab
tab = QWidget()
self.addTab(tab, self.tr("网络"),
toolTip="与网络相关的设置")
form = FormLayout()
line_edit_http_proxy = QLineEdit()
self.bind(line_edit_http_proxy, "text", "network/http-proxy")
form.addRow("HTTP 代理:", line_edit_http_proxy)
line_edit_https_proxy = QLineEdit()
self.bind(line_edit_https_proxy, "text", "network/https-proxy")
form.addRow("HTTPS 代理:", line_edit_https_proxy)
tab.setLayout(form)
if self.__macUnified:
# Need some sensible size otherwise mac unified toolbar 'takes'
# the space that should be used for layout of the contents
self.adjustSize()
class UserSettingsDialog(QMainWindow):
"""
A User Settings/Defaults dialog.
"""
MAC_UNIFIED = True
def __init__(self, parent=None, **kwargs):
super().__init__(parent, **kwargs)
self.setWindowFlags(Qt.Dialog)
self.setWindowModality(Qt.ApplicationModal)
self.layout().setSizeConstraint(QVBoxLayout.SetFixedSize)
self.__macUnified = sys.platform == "darwin" and self.MAC_UNIFIED
self._manager = BindingManager(self,
submitPolicy=BindingManager.AutoSubmit)
self.__loop = None
self.__settings = config.settings()
self.__setupUi()
def __setupUi(self):
"""Set up the UI.
"""
if self.__macUnified:
self.tab = QToolBar(
floatable=False, movable=False, allowedAreas=Qt.TopToolBarArea,
)
self.addToolBar(Qt.TopToolBarArea, self.tab)
self.setUnifiedTitleAndToolBarOnMac(True)
# This does not seem to work
self.setWindowFlags(self.windowFlags() & \
~Qt.MacWindowToolBarButtonHint)
self.tab.actionTriggered[QAction].connect(
self.__macOnToolBarAction
)
central = QStackedWidget()
central.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
else:
self.tab = central = QTabWidget(self)
# Add a close button to the bottom of the dialog
# (to satisfy GNOME 3 which shows the dialog without a title bar).
container = container_widget_helper()
container.layout().addWidget(central)
buttonbox = QDialogButtonBox(QDialogButtonBox.Close)
buttonbox.rejected.connect(self.close)
container.layout().addWidget(buttonbox)
self.setCentralWidget(container)
self.stack = central
# General Tab
tab = QWidget()
self.addTab(tab, self.tr("常规"),
toolTip=self.tr("常规选项"))
form = FormLayout()
tab.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
nodes = QWidget(self, objectName="nodes")
nodes.setLayout(QVBoxLayout())
nodes.layout().setContentsMargins(0, 0, 0, 0)
cb_anim = QCheckBox(
self.tr("启用节点动画"),
objectName="enable-node-animations",
toolTip=self.tr("为工作流中的节点启用阴影和ping动画。")
)
self.bind(cb_anim, "checked", "schemeedit/enable-node-animations")
nodes.layout().addWidget(cb_anim)
form.addRow(self.tr("结点"), nodes)
links = QWidget(self, objectName="links")
links.setLayout(QVBoxLayout())
links.layout().setContentsMargins(0, 0, 0, 0)
cb_show = QCheckBox(
self.tr("在窗口小部件之间显示通道名称"),
objectName="show-channel-names",
toolTip=self.tr("在链接上显示源和接收器通道名称。")
)
self.bind(cb_show, "checked", "schemeedit/show-channel-names")
links.layout().addWidget(cb_show)
form.addRow(self.tr("链接"), links)
quickmenu = QWidget(self, objectName="quickmenu-options")
quickmenu.setLayout(QVBoxLayout())
quickmenu.layout().setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("双击时打开"),
toolTip=self.tr("双击画布中的空白位置打开快捷菜单"))
cb2 = QCheckBox(self.tr("单击鼠标右键时打开"),
toolTip=self.tr("右键单击画布中的空白处打开快捷菜单"))
cb3 = QCheckBox(self.tr("按空格键时打开"),
toolTip=self.tr("当鼠标悬停在画布上时，按空格键。"))
cb4 = QCheckBox(self.tr("按任意按键时打开"),
toolTip=self.tr("当鼠标悬停在画布上时，按任意键。"))
cb5 = QCheckBox(self.tr("显示分类"),
toolTip=self.tr("In addition to searching, allow filtering "
"by categories."))
self.bind(cb1, "checked", "quickmenu/trigger-on-double-click")
self.bind(cb2, "checked", "quickmenu/trigger-on-right-click")
self.bind(cb3, "checked", "quickmenu/trigger-on-space-key")
self.bind(cb4, "checked", "quickmenu/trigger-on-any-key")
self.bind(cb5, "checked", "quickmenu/show-categories")
quickmenu.layout().addWidget(cb1)
quickmenu.layout().addWidget(cb2)
quickmenu.layout().addWidget(cb3)
quickmenu.layout().addWidget(cb4)
quickmenu.layout().addWidget(cb5)
form.addRow(self.tr("快捷菜单"), quickmenu)
startup = QWidget(self, objectName="startup-group")
startup.setLayout(QVBoxLayout())
startup.layout().setContentsMargins(0, 0, 0, 0)
cb_splash = QCheckBox(self.tr("显示启动画面"), self,
objectName="show-splash-screen")
cb_welcome = QCheckBox(self.tr("显示欢迎界面"), self,
objectName="show-welcome-screen")
cb_crash = QCheckBox(self.tr("加载崩溃的工作流"), self,
objectName="load-crashed-workflows")
self.bind(cb_splash, "checked", "startup/show-splash-screen")
self.bind(cb_welcome, "checked", "startup/show-welcome-screen")
self.bind(cb_crash, "checked", "startup/load-crashed-workflows")
startup.layout().addWidget(cb_splash)
startup.layout().addWidget(cb_welcome)
startup.layout().addWidget(cb_crash)
form.addRow(self.tr("启动时"), startup)
toolbox = QWidget(self, objectName="toolbox-group")
toolbox.setLayout(QVBoxLayout())
toolbox.layout().setContentsMargins(0, 0, 0, 0)
exclusive = QCheckBox(self.tr("一次只能打开一个选项卡"))
self.bind(exclusive, "checked", "mainwindow/toolbox-dock-exclusive")
toolbox.layout().addWidget(exclusive)
form.addRow(self.tr("工具箱"), toolbox)
tab.setLayout(form)
# Style tab
tab = StyleConfigWidget()
self.addTab(tab, self.tr("&Style"), toolTip="Application style")
self.bind(tab, "selectedStyle_", "application-style/style-name")
self.bind(tab, "selectedPalette_", "application-style/palette")
# Output Tab
tab = QWidget()
self.addTab(tab, self.tr("输出"),
toolTip="输出重定向")
form = FormLayout()
combo = QComboBox()
combo.addItems([self.tr("关键"),
self.tr("错误"),
self.tr("警告"),
self.tr("信息"),
self.tr("调试")])
self.bind(combo, "currentIndex", "logging/level")
form.addRow(self.tr("记录"), combo)
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("在外部浏览器中打开"),
objectName="open-in-external-browser")
self.bind(cb1, "checked", "help/open-in-external-browser")
layout.addWidget(cb1)
box.setLayout(layout)
form.addRow(self.tr("帮助窗口"), box)
tab.setLayout(form)
# Categories Tab
tab = QWidget()
layout = QVBoxLayout()
view = QListView(
editTriggers=QListView.NoEditTriggers
)
from .. import registry
reg = registry.global_registry()
model = QStandardItemModel()
settings = QSettings()
for cat in reg.categories():
item = QStandardItem()
item.setText(cat.name)
item.setCheckable(True)
visible, _ = category_state(cat, settings)
item.setCheckState(Qt.Checked if visible else Qt.Unchecked)
model.appendRow([item])
view.setModel(model)
layout.addWidget(view)
tab.setLayout(layout)
model.itemChanged.connect(
lambda item:
save_category_state(
reg.category(str(item.text())),
_State(item.checkState() == Qt.Checked, -1),
settings
)
)
self.addTab(tab, "类别")
# Add-ons Tab
tab = QWidget()
self.addTab(tab, self.tr("插件"),
toolTip="与插件安装相关的设置")
form = FormLayout()
conda = QWidget(self, objectName="conda-group")
conda.setLayout(QVBoxLayout())
conda.layout().setContentsMargins(0, 0, 0, 0)
mirror_install = QCheckBox(self.tr("使用国内镜像安装"), self,
objectName="allow-conda")
self.bind(mirror_install, "checked", "add-ons/allow-conda")
conda.layout().addWidget(mirror_install)
form.addRow(self.tr("镜像"), conda)
form.addRow(self.tr("Pip"), QLabel("Pip 安装参数:"))
line_edit_pip = QLineEdit()
# line_edit_pip.setText('-i https://mirrors.aliyun.com/pypi/simple')
self.bind(line_edit_pip, "text", "add-ons/pip-install-arguments")
form.addRow("", line_edit_pip)
tab.setLayout(form)
# Network Tab
tab = QWidget()
self.addTab(tab, self.tr("网络"),
toolTip="与网络相关的设置")
form = FormLayout()
line_edit_http_proxy = QLineEdit()
self.bind(line_edit_http_proxy, "text", "network/http-proxy")
form.addRow("HTTP 代理:", line_edit_http_proxy)
line_edit_https_proxy = QLineEdit()
self.bind(line_edit_https_proxy, "text", "network/https-proxy")
form.addRow("HTTPS 代理:", line_edit_https_proxy)
tab.setLayout(form)
if self.__macUnified:
# Need some sensible size otherwise mac unified toolbar 'takes'
# the space that should be used for layout of the contents
self.adjustSize()
def addTab(self, widget, text, toolTip=None, icon=None):
if self.__macUnified:
action = QAction(text, self)
if toolTip:
action.setToolTip(toolTip)
if icon:
action.setIcon(toolTip)
action.setData(len(self.tab.actions()))
self.tab.addAction(action)
self.stack.addWidget(widget)
else:
i = self.tab.addTab(widget, text)
if toolTip:
self.tab.setTabToolTip(i, toolTip)
if icon:
self.tab.setTabIcon(i, icon)
def setCurrentIndex(self, index: int):
if self.__macUnified:
self.stack.setCurrentIndex(index)
else:
self.tab.setCurrentIndex(index)
def widget(self, index):
if self.__macUnified:
return self.stack.widget(index)
else:
return self.tab.widget(index)
def keyPressEvent(self, event):
if event.key() == Qt.Key_Escape:
self.hide()
self.deleteLater()
def bind(self, source, source_property, key, transformer=None):
target = UserDefaultsPropertyBinding(self.__settings, key)
source = PropertyBinding(source, source_property)
source.set(target.get())
self._manager.bind(target, source)
def commit(self):
self._manager.commit()
def revert(self):
self._manager.revert()
def reset(self):
for target, source in self._manager.bindings():
try:
source.reset()
except NotImplementedError:
# Cannot reset.
pass
except Exception:
log.error("Error reseting %r", source.propertyName,
exc_info=True)
def exec_(self):
self.__loop = QEventLoop()
self.show()
status = self.__loop.exec_()
self.__loop = None
refresh_proxies()
return status
def hideEvent(self, event):
super().hideEvent(event)
if self.__loop is not None:
self.__loop.exit(0)
self.__loop = None
def __macOnToolBarAction(self, action):
index = action.data()
self.stack.setCurrentIndex(index)
def __setupUi(self):
"""Set up the UI.
"""
if self.__macUnified:
self.tab = QToolBar(
floatable=False, movable=False, allowedAreas=Qt.TopToolBarArea,
)
self.addToolBar(Qt.TopToolBarArea, self.tab)
self.setUnifiedTitleAndToolBarOnMac(True)
# This does not seem to work
self.setWindowFlags(self.windowFlags() & \
~Qt.MacWindowToolBarButtonHint)
self.tab.actionTriggered[QAction].connect(
self.__macOnToolBarAction
)
central = QStackedWidget()
central.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
else:
self.tab = central = QTabWidget(self)
# Add a close button to the bottom of the dialog
# (to satisfy GNOME 3 which shows the dialog without a title bar).
container = container_widget_helper()
container.layout().addWidget(central)
buttonbox = QDialogButtonBox(QDialogButtonBox.Close)
buttonbox.rejected.connect(self.close)
container.layout().addWidget(buttonbox)
self.setCentralWidget(container)
self.stack = central
# General Tab
tab = QWidget()
self.addTab(tab, self.tr("General"),
toolTip=self.tr("General Options"))
form = QFormLayout()
tab.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
nodes = QWidget(self, objectName="nodes")
nodes.setLayout(QVBoxLayout())
nodes.layout().setContentsMargins(0, 0, 0, 0)
cb_anim = QCheckBox(
self.tr("Enable node animations"),
objectName="enable-node-animations",
toolTip=self.tr("Enable shadow and ping animations for nodes "
"in the workflow.")
)
self.bind(cb_anim, "checked", "schemeedit/enable-node-animations")
nodes.layout().addWidget(cb_anim)
form.addRow(self.tr("Nodes"), nodes)
links = QWidget(self, objectName="links")
links.setLayout(QVBoxLayout())
links.layout().setContentsMargins(0, 0, 0, 0)
cb_show = QCheckBox(
self.tr("Show channel names between widgets"),
objectName="show-channel-names",
toolTip=self.tr("Show source and sink channel names "
"over the links.")
)
self.bind(cb_show, "checked", "schemeedit/show-channel-names")
links.layout().addWidget(cb_show)
form.addRow(self.tr("Links"), links)
quickmenu = QWidget(self, objectName="quickmenu-options")
quickmenu.setLayout(QVBoxLayout())
quickmenu.layout().setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("On double click"),
toolTip=self.tr("Open quick menu on a double click "
"on an empty spot in the canvas"))
cb2 = QCheckBox(self.tr("On right click"),
toolTip=self.tr("Open quick menu on a right click "
"on an empty spot in the canvas"))
cb3 = QCheckBox(self.tr("On space key press"),
toolTip=self.tr("On Space key press while the mouse"
"is hovering over the canvas."))
cb4 = QCheckBox(self.tr("On any key press"),
toolTip=self.tr("On any key press while the mouse"
"is hovering over the canvas."))
self.bind(cb1, "checked", "quickmenu/trigger-on-double-click")
self.bind(cb2, "checked", "quickmenu/trigger-on-right-click")
self.bind(cb3, "checked", "quickmenu/trigger-on-space-key")
self.bind(cb4, "checked", "quickmenu/trigger-on-any-key")
quickmenu.layout().addWidget(cb1)
quickmenu.layout().addWidget(cb2)
quickmenu.layout().addWidget(cb3)
quickmenu.layout().addWidget(cb4)
form.addRow(self.tr("Open quick menu on"), quickmenu)
startup = QWidget(self, objectName="startup-group")
startup.setLayout(QVBoxLayout())
startup.layout().setContentsMargins(0, 0, 0, 0)
cb_splash = QCheckBox(self.tr("Show splash screen"), self,
objectName="show-splash-screen")
cb_welcome = QCheckBox(self.tr("Show welcome screen"), self,
objectName="show-welcome-screen")
self.bind(cb_splash, "checked", "startup/show-splash-screen")
self.bind(cb_welcome, "checked", "startup/show-welcome-screen")
startup.layout().addWidget(cb_splash)
startup.layout().addWidget(cb_welcome)
form.addRow(self.tr("On startup"), startup)
toolbox = QWidget(self, objectName="toolbox-group")
toolbox.setLayout(QVBoxLayout())
toolbox.layout().setContentsMargins(0, 0, 0, 0)
exclusive = QCheckBox(self.tr("Only one tab can be open at a time"))
self.bind(exclusive, "checked", "mainwindow/toolbox-dock-exclusive")
toolbox.layout().addWidget(exclusive)
form.addRow(self.tr("Tool box"), toolbox)
tab.setLayout(form)
# Output Tab
tab = QWidget()
self.addTab(tab, self.tr("Output"),
toolTip="Output Redirection")
form = QFormLayout()
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
combo = QComboBox()
combo.addItems([self.tr("Critical"),
self.tr("Error"),
self.tr("Warn"),
self.tr("Info"),
self.tr("Debug")])
self.bind(combo, "currentIndex", "logging/level")
layout.addWidget(combo)
box.setLayout(layout)
form.addRow(self.tr("Logging"), box)
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("Open in external browser"),
objectName="open-in-external-browser")
self.bind(cb1, "checked", "help/open-in-external-browser")
layout.addWidget(cb1)
box.setLayout(layout)
form.addRow(self.tr("Help window"), box)
tab.setLayout(form)
# Categories Tab
tab = QWidget()
layout = QVBoxLayout()
view = QListView(
editTriggers=QListView.NoEditTriggers
)
from .. import registry
reg = registry.global_registry()
model = QStandardItemModel()
settings = QSettings()
for cat in reg.categories():
item = QStandardItem()
item.setText(cat.name)
item.setCheckable(True)
visible, _ = category_state(cat, settings)
item.setCheckState(Qt.Checked if visible else Qt.Unchecked)
model.appendRow([item])
view.setModel(model)
layout.addWidget(view)
tab.setLayout(layout)
model.itemChanged.connect(
lambda item:
save_category_state(
reg.category(str(item.text())),
_State(item.checkState() == Qt.Checked, -1),
settings
)
)
self.addTab(tab, "Categories")
# Add-ons Tab
tab = QWidget()
self.addTab(tab, self.tr("Add-ons"),
toolTip="Settings related to add-on installation")
form = QFormLayout()
conda = QWidget(self, objectName="conda-group")
conda.setLayout(QVBoxLayout())
conda.layout().setContentsMargins(0, 0, 0, 0)
cb_conda_install = QCheckBox(self.tr("Install add-ons with conda"), self,
objectName="allow-conda-experimental")
self.bind(cb_conda_install, "checked", "add-ons/allow-conda-experimental")
conda.layout().addWidget(cb_conda_install)
form.addRow(self.tr("Conda"), conda)
form.addRow(self.tr("Pip"), QLabel("Pip install arguments:"))
line_edit_pip = QLineEdit()
self.bind(line_edit_pip, "text", "add-ons/pip-install-arguments")
form.addRow("", line_edit_pip)
tab.setLayout(form)
# Network Tab
tab = QWidget()
self.addTab(tab, self.tr("Network"),
toolTip="Settings related to networking")
form = QFormLayout()
line_edit_http_proxy = QLineEdit()
self.bind(line_edit_http_proxy, "text", "network/http-proxy")
form.addRow("HTTP proxy:", line_edit_http_proxy)
line_edit_https_proxy = QLineEdit()
self.bind(line_edit_https_proxy, "text", "network/https-proxy")
form.addRow("HTTPS proxy:", line_edit_https_proxy)
tab.setLayout(form)
if self.__macUnified:
# Need some sensible size otherwise mac unified toolbar 'takes'
# the space that should be used for layout of the contents
self.adjustSize()
class UserSettingsDialog(QMainWindow):
"""
A User Settings/Defaults dialog.
"""
MAC_UNIFIED = True
def __init__(self, parent=None, **kwargs):
super().__init__(parent, **kwargs)
self.setWindowFlags(Qt.Dialog)
self.setWindowModality(Qt.ApplicationModal)
self.layout().setSizeConstraint(QVBoxLayout.SetFixedSize)
self.__macUnified = sys.platform == "darwin" and self.MAC_UNIFIED
self._manager = BindingManager(self,
submitPolicy=BindingManager.AutoSubmit)
self.__loop = None
self.__settings = config.settings()
self.__setupUi()
def __setupUi(self):
"""Set up the UI.
"""
if self.__macUnified:
self.tab = QToolBar(
floatable=False,
movable=False,
allowedAreas=Qt.TopToolBarArea,
)
self.addToolBar(Qt.TopToolBarArea, self.tab)
self.setUnifiedTitleAndToolBarOnMac(True)
# This does not seem to work
self.setWindowFlags(self.windowFlags() & \
~Qt.MacWindowToolBarButtonHint)
self.tab.actionTriggered[QAction].connect(
self.__macOnToolBarAction)
central = QStackedWidget()
central.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
else:
self.tab = central = QTabWidget(self)
# Add a close button to the bottom of the dialog
# (to satisfy GNOME 3 which shows the dialog without a title bar).
container = container_widget_helper()
container.layout().addWidget(central)
buttonbox = QDialogButtonBox(QDialogButtonBox.Close)
buttonbox.rejected.connect(self.close)
container.layout().addWidget(buttonbox)
self.setCentralWidget(container)
self.stack = central
# General Tab
tab = QWidget()
self.addTab(tab,
self.tr("General"),
toolTip=self.tr("General Options"))
form = FormLayout()
tab.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
nodes = QWidget(self, objectName="nodes")
nodes.setLayout(QVBoxLayout())
nodes.layout().setContentsMargins(0, 0, 0, 0)
cb_anim = QCheckBox(self.tr("Enable node animations"),
objectName="enable-node-animations",
toolTip=self.tr(
"Enable shadow and ping animations for nodes "
"in the workflow."))
self.bind(cb_anim, "checked", "schemeedit/enable-node-animations")
nodes.layout().addWidget(cb_anim)
form.addRow(self.tr("Nodes"), nodes)
links = QWidget(self, objectName="links")
links.setLayout(QVBoxLayout())
links.layout().setContentsMargins(0, 0, 0, 0)
cb_show = QCheckBox(self.tr("Show channel names between widgets"),
objectName="show-channel-names",
toolTip=self.tr(
"Show source and sink channel names "
"over the links."))
self.bind(cb_show, "checked", "schemeedit/show-channel-names")
links.layout().addWidget(cb_show)
form.addRow(self.tr("Links"), links)
quickmenu = QWidget(self, objectName="quickmenu-options")
quickmenu.setLayout(QVBoxLayout())
quickmenu.layout().setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("Open on double click"),
toolTip=self.tr("Open quick menu on a double click "
"on an empty spot in the canvas"))
cb2 = QCheckBox(self.tr("Open on right click"),
toolTip=self.tr("Open quick menu on a right click "
"on an empty spot in the canvas"))
cb3 = QCheckBox(self.tr("Open on space key press"),
toolTip=self.tr(
"Open quick menu on Space key press "
"while the mouse is hovering over the canvas."))
cb4 = QCheckBox(self.tr("Open on any key press"),
toolTip=self.tr(
"Open quick menu on any key press "
"while the mouse is hovering over the canvas."))
cb5 = QCheckBox(self.tr("Show categories"),
toolTip=self.tr(
"In addition to searching, allow filtering "
"by categories."))
self.bind(cb1, "checked", "quickmenu/trigger-on-double-click")
self.bind(cb2, "checked", "quickmenu/trigger-on-right-click")
self.bind(cb3, "checked", "quickmenu/trigger-on-space-key")
self.bind(cb4, "checked", "quickmenu/trigger-on-any-key")
self.bind(cb5, "checked", "quickmenu/show-categories")
quickmenu.layout().addWidget(cb1)
quickmenu.layout().addWidget(cb2)
quickmenu.layout().addWidget(cb3)
quickmenu.layout().addWidget(cb4)
quickmenu.layout().addWidget(cb5)
form.addRow(self.tr("Quick menu"), quickmenu)
startup = QWidget(self, objectName="startup-group")
startup.setLayout(QVBoxLayout())
startup.layout().setContentsMargins(0, 0, 0, 0)
cb_splash = QCheckBox(self.tr("Show splash screen"),
self,
objectName="show-splash-screen")
cb_welcome = QCheckBox(self.tr("Show welcome screen"),
self,
objectName="show-welcome-screen")
cb_crash = QCheckBox(self.tr("Load crashed scratch workflows"),
self,
objectName="load-crashed-workflows")
self.bind(cb_splash, "checked", "startup/show-splash-screen")
self.bind(cb_welcome, "checked", "startup/show-welcome-screen")
self.bind(cb_crash, "checked", "startup/load-crashed-workflows")
startup.layout().addWidget(cb_splash)
startup.layout().addWidget(cb_welcome)
startup.layout().addWidget(cb_crash)
form.addRow(self.tr("On startup"), startup)
toolbox = QWidget(self, objectName="toolbox-group")
toolbox.setLayout(QVBoxLayout())
toolbox.layout().setContentsMargins(0, 0, 0, 0)
exclusive = QCheckBox(self.tr("Only one tab can be open at a time"))
self.bind(exclusive, "checked", "mainwindow/toolbox-dock-exclusive")
toolbox.layout().addWidget(exclusive)
form.addRow(self.tr("Tool box"), toolbox)
tab.setLayout(form)
# Style tab
tab = StyleConfigWidget()
self.addTab(tab, self.tr("&Style"), toolTip="Application style")
self.bind(tab, "selectedStyle_", "application-style/style-name")
self.bind(tab, "selectedPalette_", "application-style/palette")
# Output Tab
tab = QWidget()
self.addTab(tab, self.tr("Output"), toolTip="Output Redirection")
form = FormLayout()
combo = QComboBox()
combo.addItems([
self.tr("Critical"),
self.tr("Error"),
self.tr("Warn"),
self.tr("Info"),
self.tr("Debug")
])
self.bind(combo, "currentIndex", "logging/level")
form.addRow(self.tr("Logging"), combo)
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("Open in external browser"),
objectName="open-in-external-browser")
self.bind(cb1, "checked", "help/open-in-external-browser")
layout.addWidget(cb1)
box.setLayout(layout)
form.addRow(self.tr("Help window"), box)
tab.setLayout(form)
# Categories Tab
tab = QWidget()
layout = QVBoxLayout()
view = QListView(editTriggers=QListView.NoEditTriggers)
from .. import registry
reg = registry.global_registry()
model = QStandardItemModel()
settings = QSettings()
for cat in reg.categories():
item = QStandardItem()
item.setText(cat.name)
item.setCheckable(True)
visible, _ = category_state(cat, settings)
item.setCheckState(Qt.Checked if visible else Qt.Unchecked)
model.appendRow([item])
view.setModel(model)
layout.addWidget(view)
tab.setLayout(layout)
model.itemChanged.connect(lambda item: save_category_state(
reg.category(str(item.text())),
_State(item.checkState() == Qt.Checked, -1), settings))
self.addTab(tab, "Categories")
# Add-ons Tab
tab = QWidget()
self.addTab(tab,
self.tr("Add-ons"),
toolTip="Settings related to add-on installation")
form = FormLayout()
conda = QWidget(self, objectName="conda-group")
conda.setLayout(QVBoxLayout())
conda.layout().setContentsMargins(0, 0, 0, 0)
cb_conda_install = QCheckBox(self.tr("Install add-ons with conda"),
self,
objectName="allow-conda")
self.bind(cb_conda_install, "checked", "add-ons/allow-conda")
conda.layout().addWidget(cb_conda_install)
form.addRow(self.tr("Conda"), conda)
form.addRow(self.tr("Pip"), QLabel("Pip install arguments:"))
line_edit_pip = QLineEdit()
self.bind(line_edit_pip, "text", "add-ons/pip-install-arguments")
form.addRow("", line_edit_pip)
tab.setLayout(form)
# Network Tab
tab = QWidget()
self.addTab(tab,
self.tr("Network"),
toolTip="Settings related to networking")
form = FormLayout()
line_edit_http_proxy = QLineEdit()
self.bind(line_edit_http_proxy, "text", "network/http-proxy")
form.addRow("HTTP proxy:", line_edit_http_proxy)
line_edit_https_proxy = QLineEdit()
self.bind(line_edit_https_proxy, "text", "network/https-proxy")
form.addRow("HTTPS proxy:", line_edit_https_proxy)
tab.setLayout(form)
if self.__macUnified:
# Need some sensible size otherwise mac unified toolbar 'takes'
# the space that should be used for layout of the contents
self.adjustSize()
def addTab(self, widget, text, toolTip=None, icon=None):
if self.__macUnified:
action = QAction(text, self)
if toolTip:
action.setToolTip(toolTip)
if icon:
action.setIcon(toolTip)
action.setData(len(self.tab.actions()))
self.tab.addAction(action)
self.stack.addWidget(widget)
else:
i = self.tab.addTab(widget, text)
if toolTip:
self.tab.setTabToolTip(i, toolTip)
if icon:
self.tab.setTabIcon(i, icon)
def setCurrentIndex(self, index: int):
if self.__macUnified:
self.stack.setCurrentIndex(index)
else:
self.tab.setCurrentIndex(index)
def widget(self, index):
if self.__macUnified:
return self.stack.widget(index)
else:
return self.tab.widget(index)
def keyPressEvent(self, event):
if event.key() == Qt.Key_Escape:
self.hide()
self.deleteLater()
def bind(self, source, source_property, key, transformer=None):
target = UserDefaultsPropertyBinding(self.__settings, key)
source = PropertyBinding(source, source_property)
source.set(target.get())
self._manager.bind(target, source)
def commit(self):
self._manager.commit()
def revert(self):
self._manager.revert()
def reset(self):
for target, source in self._manager.bindings():
try:
source.reset()
except NotImplementedError:
# Cannot reset.
pass
except Exception:
log.error("Error reseting %r",
source.propertyName,
exc_info=True)
def exec_(self):
self.__loop = QEventLoop()
self.show()
status = self.__loop.exec_()
self.__loop = None
refresh_proxies()
return status
def hideEvent(self, event):
super().hideEvent(event)
if self.__loop is not None:
self.__loop.exit(0)
self.__loop = None
def __macOnToolBarAction(self, action):
index = action.data()
self.stack.setCurrentIndex(index)
def __init__(self, parent=None, *args, **kwargs):
QToolBar.__init__(self, *args, **kwargs)
class UserSettingsDialog(QMainWindow):
"""
A User Settings/Defaults dialog.
"""
MAC_UNIFIED = True
def __init__(self, parent=None, **kwargs):
QMainWindow.__init__(self, parent, **kwargs)
self.setWindowFlags(Qt.Dialog)
self.setWindowModality(Qt.ApplicationModal)
self.layout().setSizeConstraint(QVBoxLayout.SetFixedSize)
self.__macUnified = sys.platform == "darwin" and self.MAC_UNIFIED
self._manager = BindingManager(self,
submitPolicy=BindingManager.AutoSubmit)
self.__loop = None
self.__settings = config.settings()
self.__setupUi()
def __setupUi(self):
"""Set up the UI.
"""
if self.__macUnified:
self.tab = QToolBar()
self.addToolBar(Qt.TopToolBarArea, self.tab)
self.setUnifiedTitleAndToolBarOnMac(True)
# This does not seem to work
self.setWindowFlags(self.windowFlags() & \
~Qt.MacWindowToolBarButtonHint)
self.tab.actionTriggered[QAction].connect(
self.__macOnToolBarAction
)
central = QStackedWidget()
central.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
else:
self.tab = central = QTabWidget(self)
self.stack = central
self.setCentralWidget(central)
# General Tab
tab = QWidget()
self.addTab(tab, self.tr("General"),
toolTip=self.tr("General Options"))
form = QFormLayout()
tab.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
nodes = QWidget(self, objectName="nodes")
nodes.setLayout(QVBoxLayout())
nodes.layout().setContentsMargins(0, 0, 0, 0)
cb_anim = QCheckBox(
self.tr("Enable node animations"),
objectName="enable-node-animations",
toolTip=self.tr("Enable shadow and ping animations for nodes "
"in the workflow.")
)
self.bind(cb_anim, "checked", "schemeedit/enable-node-animations")
nodes.layout().addWidget(cb_anim)
form.addRow(self.tr("Nodes"), nodes)
links = QWidget(self, objectName="links")
links.setLayout(QVBoxLayout())
links.layout().setContentsMargins(0, 0, 0, 0)
cb_show = QCheckBox(
self.tr("Show channel names between widgets"),
objectName="show-channel-names",
toolTip=self.tr("Show source and sink channel names "
"over the links.")
)
self.bind(cb_show, "checked", "schemeedit/show-channel-names")
links.layout().addWidget(cb_show)
form.addRow(self.tr("Links"), links)
quickmenu = QWidget(self, objectName="quickmenu-options")
quickmenu.setLayout(QVBoxLayout())
quickmenu.layout().setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("On double click"),
toolTip=self.tr("Open quick menu on a double click "
"on an empty spot in the canvas"))
cb2 = QCheckBox(self.tr("On right click"),
toolTip=self.tr("Open quick menu on a right click "
"on an empty spot in the canvas"))
cb3 = QCheckBox(self.tr("On space key press"),
toolTip=self.tr("On Space key press while the mouse"
"is hovering over the canvas."))
cb4 = QCheckBox(self.tr("On any key press"),
toolTip=self.tr("On any key press while the mouse"
"is hovering over the canvas."))
self.bind(cb1, "checked", "quickmenu/trigger-on-double-click")
self.bind(cb2, "checked", "quickmenu/trigger-on-right-click")
self.bind(cb3, "checked", "quickmenu/trigger-on-space-key")
self.bind(cb4, "checked", "quickmenu/trigger-on-any-key")
quickmenu.layout().addWidget(cb1)
quickmenu.layout().addWidget(cb2)
quickmenu.layout().addWidget(cb3)
quickmenu.layout().addWidget(cb4)
form.addRow(self.tr("Open quick menu on"), quickmenu)
startup = QWidget(self, objectName="startup-group")
startup.setLayout(QVBoxLayout())
startup.layout().setContentsMargins(0, 0, 0, 0)
cb_splash = QCheckBox(self.tr("Show splash screen"), self,
objectName="show-splash-screen")
cb_welcome = QCheckBox(self.tr("Show welcome screen"), self,
objectName="show-welcome-screen")
cb_updates = QCheckBox(self.tr("Check for updates"), self,
objectName="check-updates")
self.bind(cb_splash, "checked", "startup/show-splash-screen")
self.bind(cb_welcome, "checked", "startup/show-welcome-screen")
self.bind(cb_updates, "checked", "startup/check-updates")
startup.layout().addWidget(cb_splash)
startup.layout().addWidget(cb_welcome)
startup.layout().addWidget(cb_updates)
form.addRow(self.tr("On startup"), startup)
toolbox = QWidget(self, objectName="toolbox-group")
toolbox.setLayout(QVBoxLayout())
toolbox.layout().setContentsMargins(0, 0, 0, 0)
exclusive = QCheckBox(self.tr("Only one tab can be open at a time"))
self.bind(exclusive, "checked", "mainwindow/toolbox-dock-exclusive")
toolbox.layout().addWidget(exclusive)
form.addRow(self.tr("Tool box"), toolbox)
tab.setLayout(form)
# Output Tab
tab = QWidget()
self.addTab(tab, self.tr("Output"),
toolTip="Output Redirection")
form = QFormLayout()
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
combo = QComboBox()
combo.addItems([self.tr("Critical"),
self.tr("Error"),
self.tr("Warn"),
self.tr("Info"),
self.tr("Debug")])
self.bind(combo, "currentIndex", "logging/level")
layout.addWidget(combo)
box.setLayout(layout)
form.addRow(self.tr("Logging"), box)
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("Open in external browser"),
objectName="open-in-external-browser")
self.bind(cb1, "checked", "help/open-in-external-browser")
layout.addWidget(cb1)
box.setLayout(layout)
form.addRow(self.tr("Help window"), box)
tab.setLayout(form)
# Error Reporting Tab
tab = QWidget()
self.addTab(tab, self.tr("Error Reporting"),
toolTip="Settings related to error reporting")
form = QFormLayout()
line_edit_mid = QLineEdit()
self.bind(line_edit_mid, "text", "error-reporting/machine-id")
form.addRow("Machine ID:", line_edit_mid)
tab.setLayout(form)
# Add-ons Tab
tab = QWidget()
self.addTab(tab, self.tr("Add-ons"),
toolTip="Settings related to add-on installation")
form = QFormLayout()
conda = QWidget(self, objectName="conda-group")
conda.setLayout(QVBoxLayout())
conda.layout().setContentsMargins(0, 0, 0, 0)
cb_conda_install = QCheckBox(self.tr("Install add-ons with conda"), self,
objectName="allow-conda-experimental")
self.bind(cb_conda_install, "checked", "add-ons/allow-conda-experimental")
conda.layout().addWidget(cb_conda_install)
form.addRow(self.tr("Conda"), conda)
tab.setLayout(form)
if self.__macUnified:
# Need some sensible size otherwise mac unified toolbar 'takes'
# the space that should be used for layout of the contents
self.adjustSize()
def addTab(self, widget, text, toolTip=None, icon=None):
if self.__macUnified:
action = QAction(text, self)
if toolTip:
action.setToolTip(toolTip)
if icon:
action.setIcon(toolTip)
action.setData(len(self.tab.actions()))
self.tab.addAction(action)
self.stack.addWidget(widget)
else:
i = self.tab.addTab(widget, text)
if toolTip:
self.tab.setTabToolTip(i, toolTip)
if icon:
self.tab.setTabIcon(i, icon)
def keyPressEvent(self, event):
if event.key() == Qt.Key_Escape:
self.hide()
self.deleteLater()
def bind(self, source, source_property, key, transformer=None):
target = UserDefaultsPropertyBinding(self.__settings, key)
source = PropertyBinding(source, source_property)
source.set(target.get())
self._manager.bind(target, source)
def commit(self):
self._manager.commit()
def revert(self):
self._manager.revert()
def reset(self):
for target, source in self._manager.bindings():
try:
source.reset()
except NotImplementedError:
# Cannot reset.
pass
except Exception:
log.error("Error reseting %r", source.propertyName,
exc_info=True)
def exec_(self):
self.__loop = QEventLoop()
self.show()
status = self.__loop.exec_()
self.__loop = None
return status
def hideEvent(self, event):
QMainWindow.hideEvent(self, event)
if self.__loop is not None:
self.__loop.exit(0)
self.__loop = None
def __macOnToolBarAction(self, action):
self.stack.setCurrentIndex(action.data())
def __setupUi(self):
"""Set up the UI.
"""
if self.__macUnified:
self.tab = QToolBar()
self.addToolBar(Qt.TopToolBarArea, self.tab)
self.setUnifiedTitleAndToolBarOnMac(True)
# This does not seem to work
self.setWindowFlags(self.windowFlags() & \
~Qt.MacWindowToolBarButtonHint)
self.tab.actionTriggered[QAction].connect(
self.__macOnToolBarAction)
central = QStackedWidget()
central.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
else:
self.tab = central = QTabWidget(self)
self.stack = central
self.setCentralWidget(central)
# General Tab
tab = QWidget()
self.addTab(tab,
self.tr("General"),
toolTip=self.tr("General Options"))
form = QFormLayout()
tab.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
nodes = QWidget(self, objectName="nodes")
nodes.setLayout(QVBoxLayout())
nodes.layout().setContentsMargins(0, 0, 0, 0)
cb_anim = QCheckBox(self.tr("Enable node animations"),
objectName="enable-node-animations",
toolTip=self.tr(
"Enable shadow and ping animations for nodes "
"in the workflow."))
self.bind(cb_anim, "checked", "schemeedit/enable-node-animations")
nodes.layout().addWidget(cb_anim)
form.addRow(self.tr("Nodes"), nodes)
links = QWidget(self, objectName="links")
links.setLayout(QVBoxLayout())
links.layout().setContentsMargins(0, 0, 0, 0)
cb_show = QCheckBox(self.tr("Show channel names between widgets"),
objectName="show-channel-names",
toolTip=self.tr(
"Show source and sink channel names "
"over the links."))
self.bind(cb_show, "checked", "schemeedit/show-channel-names")
links.layout().addWidget(cb_show)
form.addRow(self.tr("Links"), links)
quickmenu = QWidget(self, objectName="quickmenu-options")
quickmenu.setLayout(QVBoxLayout())
quickmenu.layout().setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("On double click"),
toolTip=self.tr("Open quick menu on a double click "
"on an empty spot in the canvas"))
cb2 = QCheckBox(self.tr("On right click"),
toolTip=self.tr("Open quick menu on a right click "
"on an empty spot in the canvas"))
cb3 = QCheckBox(self.tr("On space key press"),
toolTip=self.tr("On Space key press while the mouse"
"is hovering over the canvas."))
cb4 = QCheckBox(self.tr("On any key press"),
toolTip=self.tr("On any key press while the mouse"
"is hovering over the canvas."))
self.bind(cb1, "checked", "quickmenu/trigger-on-double-click")
self.bind(cb2, "checked", "quickmenu/trigger-on-right-click")
self.bind(cb3, "checked", "quickmenu/trigger-on-space-key")
self.bind(cb4, "checked", "quickmenu/trigger-on-any-key")
quickmenu.layout().addWidget(cb1)
quickmenu.layout().addWidget(cb2)
quickmenu.layout().addWidget(cb3)
quickmenu.layout().addWidget(cb4)
form.addRow(self.tr("Open quick menu on"), quickmenu)
startup = QWidget(self, objectName="startup-group")
startup.setLayout(QVBoxLayout())
startup.layout().setContentsMargins(0, 0, 0, 0)
cb_splash = QCheckBox(self.tr("Show splash screen"),
self,
objectName="show-splash-screen")
cb_welcome = QCheckBox(self.tr("Show welcome screen"),
self,
objectName="show-welcome-screen")
cb_updates = QCheckBox(self.tr("Check for updates"),
self,
objectName="check-updates")
self.bind(cb_splash, "checked", "startup/show-splash-screen")
self.bind(cb_welcome, "checked", "startup/show-welcome-screen")
self.bind(cb_updates, "checked", "startup/check-updates")
startup.layout().addWidget(cb_splash)
startup.layout().addWidget(cb_welcome)
startup.layout().addWidget(cb_updates)
form.addRow(self.tr("On startup"), startup)
toolbox = QWidget(self, objectName="toolbox-group")
toolbox.setLayout(QVBoxLayout())
toolbox.layout().setContentsMargins(0, 0, 0, 0)
exclusive = QCheckBox(self.tr("Only one tab can be open at a time"))
self.bind(exclusive, "checked", "mainwindow/toolbox-dock-exclusive")
toolbox.layout().addWidget(exclusive)
form.addRow(self.tr("Tool box"), toolbox)
tab.setLayout(form)
# Output Tab
tab = QWidget()
self.addTab(tab, self.tr("Output"), toolTip="Output Redirection")
form = QFormLayout()
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
combo = QComboBox()
combo.addItems([
self.tr("Critical"),
self.tr("Error"),
self.tr("Warn"),
self.tr("Info"),
self.tr("Debug")
])
self.bind(combo, "currentIndex", "logging/level")
layout.addWidget(combo)
box.setLayout(layout)
form.addRow(self.tr("Logging"), box)
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("Open in external browser"),
objectName="open-in-external-browser")
self.bind(cb1, "checked", "help/open-in-external-browser")
layout.addWidget(cb1)
box.setLayout(layout)
form.addRow(self.tr("Help window"), box)
tab.setLayout(form)
# Error Reporting Tab
tab = QWidget()
self.addTab(tab,
self.tr("Error Reporting"),
toolTip="Settings related to error reporting")
form = QFormLayout()
line_edit_mid = QLineEdit()
self.bind(line_edit_mid, "text", "error-reporting/machine-id")
form.addRow("Machine ID:", line_edit_mid)
tab.setLayout(form)
if self.__macUnified:
# Need some sensible size otherwise mac unified toolbar 'takes'
# the space that should be used for layout of the contents
self.adjustSize()
def __init__(self, ClassObject):
super(QMainWindow, self).__init__()
w = ClassObject()
w.app_main_window = self
self._widget = w
if len(w.mainmenu) > 0:
w._mainmenu = self.__initMainMenu(w.mainmenu)
w.init_form()
if _api.USED_API == _api.QT_API_PYQT5:
self.layout().setContentsMargins(conf.PYFORMS_MAINWINDOW_MARGIN,
conf.PYFORMS_MAINWINDOW_MARGIN,
conf.PYFORMS_MAINWINDOW_MARGIN,
conf.PYFORMS_MAINWINDOW_MARGIN)
elif _api.USED_API == _api.QT_API_PYQT4:
self.layout().setMargin(conf.PYFORMS_MAINWINDOW_MARGIN)
self.setCentralWidget(w)
self.setWindowTitle(w.title)
docks = {}
for name, item in w.controls.items():
if isinstance(item, ControlDockWidget):
if item.side not in docks:
docks[item.side] = []
docks[item.side].append((name, item))
#Construct the toolbar
if len(w.toolbar) > 0:
tb = QToolBar(self)
self.addToolBar(tb)
for item in w.toolbar:
if isinstance(item, str) and item in ['|', '-']:
tb.addSeparator()
else:
tb.addWidget(item.form)
for key, widgets in docks.items():
side = QtCore.Qt.RightDockWidgetArea
if key == 'left':
side = QtCore.Qt.LeftDockWidgetArea
elif key == 'right':
side = QtCore.Qt.RightDockWidgetArea
elif key == 'top':
side = QtCore.Qt.TopDockWidgetArea
elif key == 'bottom':
side = QtCore.Qt.BottomDockWidgetArea
else:
side = QtCore.Qt.LeftDockWidgetArea
if isinstance(widgets, list):
widgets = sorted(widgets, key=lambda x: x[1].order)
for name, widget in widgets:
dock = QDockWidget(self)
dock.setFeatures(QDockWidget.DockWidgetFloatable
| QDockWidget.DockWidgetClosable
| QDockWidget.DockWidgetMovable)
dock.setObjectName(name)
if _api.USED_API == _api.QT_API_PYQT5:
dock.setContentsMargins(0, 0, 0, 0)
widget.form.layout().setContentsMargins(
widget.margin, widget.margin, widget.margin,
widget.margin)
elif _api.USED_API == _api.QT_API_PYQT4:
dock.setMargin(0)
widget.form.layout().setMargin(widget.margin)
# print dock.objectName(),1
dock.setWidget(widget.form)
dock.setWindowTitle(widget.label)
widget.dock = dock
if not widget._show: dock.hide()
self.addDockWidget(side, dock)
else:
dock = QDockWidget(self)
dock.setFeatures(QDockWidget.DockWidgetFloatable
| QDockWidget.DockWidgetClosable
| QDockWidget.DockWidgetMovable)
# dock.setAllowedAreas(QtCore.Qt.LeftDockWidgetArea | QtCore.Qt.RightDockWidgetArea)
if _api.USED_API == _api.QT_API_PYQT5:
widget.form.layout().setContentsMargins(
widget.margin, widget.margin, widget.margin,
widget.margin)
elif _api.USED_API == _api.QT_API_PYQT5:
widget.form.layout().setMargin(widget.margin)
# print dock.objectName(), 2
dock.setObjectName(name)
dock.setWidget(widget.form)
self.addDockWidget(side, dock)
dock.setWindowTitle(widget.label)
widget.dock = dock
if not widget._show: dock.hide()
if conf.PYFORMS_STYLESHEET:
stylesheet_files = [conf.PYFORMS_STYLESHEET]
p = platform.system()
if p == 'Windows' and conf.PYFORMS_STYLESHEET_WINDOWS:
stylesheet_files.append(conf.PYFORMS_STYLESHEET_WINDOWS)
elif p == 'Darwin' and conf.PYFORMS_STYLESHEET_DARWIN:
stylesheet_files.append(conf.PYFORMS_STYLESHEET_DARWIN)
elif p == 'Linux' and conf.PYFORMS_STYLESHEET_LINUX:
stylesheet_files.append(conf.PYFORMS_STYLESHEET_LINUX)
logger.debug('Import stylesheets: {0}'.format(stylesheet_files))
self.loadStyleSheetFile(stylesheet_files)
class UserSettingsDialog(QMainWindow):
"""
A User Settings/Defaults dialog.
"""
MAC_UNIFIED = True
def __init__(self, parent=None, **kwargs):
QMainWindow.__init__(self, parent, **kwargs)
self.setWindowFlags(Qt.Dialog)
self.setWindowModality(Qt.ApplicationModal)
self.layout().setSizeConstraint(QVBoxLayout.SetFixedSize)
self.__macUnified = sys.platform == "darwin" and self.MAC_UNIFIED
self._manager = BindingManager(self,
submitPolicy=BindingManager.AutoSubmit)
self.__loop = None
self.__settings = config.settings()
self.__setupUi()
def __setupUi(self):
"""Set up the UI.
"""
if self.__macUnified:
self.tab = QToolBar()
self.addToolBar(Qt.TopToolBarArea, self.tab)
self.setUnifiedTitleAndToolBarOnMac(True)
# This does not seem to work
self.setWindowFlags(self.windowFlags() & \
~Qt.MacWindowToolBarButtonHint)
self.tab.actionTriggered[QAction].connect(
self.__macOnToolBarAction)
central = QStackedWidget()
central.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
else:
self.tab = central = QTabWidget(self)
self.stack = central
self.setCentralWidget(central)
# General Tab
tab = QWidget()
self.addTab(tab,
self.tr("General"),
toolTip=self.tr("General Options"))
form = QFormLayout()
tab.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
nodes = QWidget(self, objectName="nodes")
nodes.setLayout(QVBoxLayout())
nodes.layout().setContentsMargins(0, 0, 0, 0)
cb_anim = QCheckBox(self.tr("Enable node animations"),
objectName="enable-node-animations",
toolTip=self.tr(
"Enable shadow and ping animations for nodes "
"in the workflow."))
self.bind(cb_anim, "checked", "schemeedit/enable-node-animations")
nodes.layout().addWidget(cb_anim)
form.addRow(self.tr("Nodes"), nodes)
links = QWidget(self, objectName="links")
links.setLayout(QVBoxLayout())
links.layout().setContentsMargins(0, 0, 0, 0)
cb_show = QCheckBox(self.tr("Show channel names between widgets"),
objectName="show-channel-names",
toolTip=self.tr(
"Show source and sink channel names "
"over the links."))
self.bind(cb_show, "checked", "schemeedit/show-channel-names")
links.layout().addWidget(cb_show)
form.addRow(self.tr("Links"), links)
quickmenu = QWidget(self, objectName="quickmenu-options")
quickmenu.setLayout(QVBoxLayout())
quickmenu.layout().setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("On double click"),
toolTip=self.tr("Open quick menu on a double click "
"on an empty spot in the canvas"))
cb2 = QCheckBox(self.tr("On right click"),
toolTip=self.tr("Open quick menu on a right click "
"on an empty spot in the canvas"))
cb3 = QCheckBox(self.tr("On space key press"),
toolTip=self.tr("On Space key press while the mouse"
"is hovering over the canvas."))
cb4 = QCheckBox(self.tr("On any key press"),
toolTip=self.tr("On any key press while the mouse"
"is hovering over the canvas."))
self.bind(cb1, "checked", "quickmenu/trigger-on-double-click")
self.bind(cb2, "checked", "quickmenu/trigger-on-right-click")
self.bind(cb3, "checked", "quickmenu/trigger-on-space-key")
self.bind(cb4, "checked", "quickmenu/trigger-on-any-key")
quickmenu.layout().addWidget(cb1)
quickmenu.layout().addWidget(cb2)
quickmenu.layout().addWidget(cb3)
quickmenu.layout().addWidget(cb4)
form.addRow(self.tr("Open quick menu on"), quickmenu)
startup = QWidget(self, objectName="startup-group")
startup.setLayout(QVBoxLayout())
startup.layout().setContentsMargins(0, 0, 0, 0)
cb_splash = QCheckBox(self.tr("Show splash screen"),
self,
objectName="show-splash-screen")
cb_welcome = QCheckBox(self.tr("Show welcome screen"),
self,
objectName="show-welcome-screen")
cb_updates = QCheckBox(self.tr("Check for updates"),
self,
objectName="check-updates")
self.bind(cb_splash, "checked", "startup/show-splash-screen")
self.bind(cb_welcome, "checked", "startup/show-welcome-screen")
self.bind(cb_updates, "checked", "startup/check-updates")
startup.layout().addWidget(cb_splash)
startup.layout().addWidget(cb_welcome)
startup.layout().addWidget(cb_updates)
form.addRow(self.tr("On startup"), startup)
toolbox = QWidget(self, objectName="toolbox-group")
toolbox.setLayout(QVBoxLayout())
toolbox.layout().setContentsMargins(0, 0, 0, 0)
exclusive = QCheckBox(self.tr("Only one tab can be open at a time"))
self.bind(exclusive, "checked", "mainwindow/toolbox-dock-exclusive")
toolbox.layout().addWidget(exclusive)
form.addRow(self.tr("Tool box"), toolbox)
tab.setLayout(form)
# Output Tab
tab = QWidget()
self.addTab(tab, self.tr("Output"), toolTip="Output Redirection")
form = QFormLayout()
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
combo = QComboBox()
combo.addItems([
self.tr("Critical"),
self.tr("Error"),
self.tr("Warn"),
self.tr("Info"),
self.tr("Debug")
])
self.bind(combo, "currentIndex", "logging/level")
layout.addWidget(combo)
box.setLayout(layout)
form.addRow(self.tr("Logging"), box)
box = QWidget()
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
cb1 = QCheckBox(self.tr("Open in external browser"),
objectName="open-in-external-browser")
self.bind(cb1, "checked", "help/open-in-external-browser")
layout.addWidget(cb1)
box.setLayout(layout)
form.addRow(self.tr("Help window"), box)
tab.setLayout(form)
# Error Reporting Tab
tab = QWidget()
self.addTab(tab,
self.tr("Error Reporting"),
toolTip="Settings related to error reporting")
form = QFormLayout()
line_edit_mid = QLineEdit()
self.bind(line_edit_mid, "text", "error-reporting/machine-id")
form.addRow("Machine ID:", line_edit_mid)
tab.setLayout(form)
if self.__macUnified:
# Need some sensible size otherwise mac unified toolbar 'takes'
# the space that should be used for layout of the contents
self.adjustSize()
def addTab(self, widget, text, toolTip=None, icon=None):
if self.__macUnified:
action = QAction(text, self)
if toolTip:
action.setToolTip(toolTip)
if icon:
action.setIcon(toolTip)
action.setData(len(self.tab.actions()))
self.tab.addAction(action)
self.stack.addWidget(widget)
else:
i = self.tab.addTab(widget, text)
if toolTip:
self.tab.setTabToolTip(i, toolTip)
if icon:
self.tab.setTabIcon(i, icon)
def keyPressEvent(self, event):
if event.key() == Qt.Key_Escape:
self.hide()
self.deleteLater()
def bind(self, source, source_property, key, transformer=None):
target = UserDefaultsPropertyBinding(self.__settings, key)
source = PropertyBinding(source, source_property)
source.set(target.get())
self._manager.bind(target, source)
def commit(self):
self._manager.commit()
def revert(self):
self._manager.revert()
def reset(self):
for target, source in self._manager.bindings():
try:
source.reset()
except NotImplementedError:
# Cannot reset.
pass
except Exception:
log.error("Error reseting %r",
source.propertyName,
exc_info=True)
def exec_(self):
self.__loop = QEventLoop()
self.show()
status = self.__loop.exec_()
self.__loop = None
return status
def hideEvent(self, event):
QMainWindow.hideEvent(self, event)
if self.__loop is not None:
self.__loop.exit(0)
self.__loop = None
def __macOnToolBarAction(self, action):
self.stack.setCurrentIndex(action.data())