def outCore():
if (CTK.t == []): return
if (CTK.__MAINTREE__ <= 0):
CTK.TXT.insert('START', 'Fail on a temporary tree.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
nzs = CPlot.getSelectedZones()
if (nzs == []):
CTK.TXT.insert('START', 'Selection is empty.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
for nz in nzs:
nob = CTK.Nb[nz] + 1
noz = CTK.Nz[nz]
z = CTK.t[2][nob][2][noz]
ooc = Internal.getNodesFromName1(z, 'OutOfCore')
if (len(ooc) == 0):
# Save zone
base = CTK.t[2][nob]
name = '.' + base[0] + '#' + z[0] + '.cgns'
t = C.newPyTree(['Base'])
t[2][1][2].append(z)
C.convertPyTree2File(t, name)
# Replace zone
bb = G.BB(z)
bb[2].append(['OutOfCore', numpy.array([1]), [], \
'UserDefinedData_t'])
bb = CPlot.addRender2Zone(bb, blending=0.2)
CTK.replace(CTK.t, nob, noz, bb)
CTK.saveTree() # il est apres pour forcer le flush
CTK.TXT.insert('START', 'Selected zones out of core.\n')
CTK.t = C.fillMissingVariables(CTK.t)
(CTK.Nb, CTK.Nz) = CPlot.updateCPlotNumbering(CTK.t)
CTK.TKTREE.updateApp()
CPlot.render()
def setShaderParameter(event=None):
if CTK.t == []: return
if CTK.__MAINTREE__ <= 0:
CTK.TXT.insert('START', 'Fail on a temporary tree.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
shaderParameter2 = (WIDGETS['param2'].get()) / 50.
shaderParameter1 = (WIDGETS['param1'].get()) / 50.
VARS[4].set('Shader parameter 1 [%.2f].' % shaderParameter1)
VARS[5].set('Shader parameter 2 [%.2f].' % shaderParameter2)
nzs = CPlot.getSelectedZones()
if nzs == []:
CTK.TXT.insert('START', 'Selection is empty.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
CTK.saveTree()
for nz in nzs:
nob = CTK.Nb[nz] + 1
noz = CTK.Nz[nz]
a = CPlot.addRender2Zone(
CTK.t[2][nob][2][noz],
shaderParameters=[shaderParameter1, shaderParameter2])
CTK.replace(CTK.t, nob, noz, a)
CTK.TKTREE.updateApp()
Panels.updateRenderPanel()
CPlot.render()
def setAll():
if CTK.t == []: return
if CTK.__MAINTREE__ <= 0:
CTK.TXT.insert('START', 'Fail on a temporary tree.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
material = VARS[0].get()
color = VARS[1].get()
blending = WIDGETS['blending'].get() / 100.
VARS[6].set('Blending [%.2f].' % blending)
meshOverlay = VARS[3].get()
shaderParameter2 = (WIDGETS['param2'].get()) / 50.
shaderParameter1 = (WIDGETS['param1'].get()) / 50.
nzs = CPlot.getSelectedZones()
if nzs == []:
CTK.TXT.insert('START', 'Selection is empty.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
CTK.saveTree()
for nz in nzs:
nob = CTK.Nb[nz] + 1
noz = CTK.Nz[nz]
a = CPlot.addRender2Zone(
CTK.t[2][nob][2][noz],
material=material,
color=color,
blending=blending,
shaderParameters=[shaderParameter1, shaderParameter2])
CTK.replace(CTK.t, nob, noz, a)
CTK.TKTREE.updateApp()
Panels.updateRenderPanel()
CPlot.render()
def createZEllipse():
import Geom.PyTree as D
import Transform.PyTree as T
alpha = CTK.varsFromWidget(VARS[1].get(), type=2)
if len(alpha) == 1:
ax = alpha[0]
ay = alpha[0]
az = alpha[0]
bx = alpha[0]
by = alpha[0]
bz = alpha[0]
elif len(alpha) == 3:
ax = alpha[0]
ay = alpha[1]
az = alpha[2]
bx = alpha[0]
by = alpha[1]
bz = alpha[2]
elif len(alpha) == 6:
ax = alpha[0]
ay = alpha[1]
az = alpha[2]
bx = alpha[3]
by = alpha[4]
bz = alpha[5]
else:
CTK.TXT.insert('START', 'Borders factor incorrect.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
try:
box = G.bbox(CTK.t)
except:
box = [0, 0, 0, 1, 1, 1]
hx = box[3] - box[0]
hy = box[4] - box[1]
if hx < 1.e-10: hx = 0.1
if hy < 1.e-10: hy = 0.1
hx = hx * 0.7 * ax
hy = hy * 0.7 * ay
cx = 0.5 * (box[0] + box[3])
cy = 0.5 * (box[1] + box[4])
if hx < hy:
s = D.circle((cx, cy, box[2]), hx, N=50)
s = T.contract(s, (cx, cy, box[2]), (1, 0, 0), (0, 0, 1), hy / hx)
else:
s = D.circle((cx, cy, box[2]), hy, N=50)
s = T.contract(s, (cx, cy, box[2]), (0, 1, 0), (0, 0, 1), hx / hy)
s = C.convertArray2Tetra(s)
s = G.close(s, 1.e-6)
p = G.fittingPlaster(s, bumpFactor=0.)
s = G.gapfixer(s, p)
s = CPlot.addRender2Zone(s, material='Solid', color='White', meshOverlay=0)
return [s]
def createZPlane():
alpha = CTK.varsFromWidget(VARS[1].get(), type=2)
if len(alpha) == 1:
ax = alpha[0]
ay = alpha[0]
az = alpha[0]
bx = alpha[0]
by = alpha[0]
bz = alpha[0]
elif len(alpha) == 3:
ax = alpha[0]
ay = alpha[1]
az = alpha[2]
bx = alpha[0]
by = alpha[1]
bz = alpha[2]
elif len(alpha) == 6:
ax = alpha[0]
ay = alpha[1]
az = alpha[2]
bx = alpha[3]
by = alpha[4]
bz = alpha[5]
else:
CTK.TXT.insert('START', 'Borders factor incorrect.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
try:
box = G.bbox(CTK.t)
except:
box = [0, 0, 0, 1, 1, 1]
hx = box[3] - box[0]
hy = box[4] - box[1]
if hx < 1.e-10: hx = 0.1
if hy < 1.e-10: hy = 0.1
hx = hx * 0.5
hy = hy * 0.5
b = G.cart((box[0] - ax * hx, box[1] - ay * hy, box[2]), (hx, hy, 1),
(ax + bx + 3, ay + by + 3, 1))
b = CPlot.addRender2Zone(b, material='Solid', color='White', meshOverlay=1)
return [b]
def setMaterial():
if CTK.t == []: return
if CTK.__MAINTREE__ <= 0:
CTK.TXT.insert('START', 'Fail on a temporary tree.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
material = VARS[0].get()
nzs = CPlot.getSelectedZones()
if nzs == []:
CTK.TXT.insert('START', 'Selection is empty.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
CTK.saveTree()
for nz in nzs:
nob = CTK.Nb[nz] + 1
noz = CTK.Nz[nz]
a = CPlot.addRender2Zone(CTK.t[2][nob][2][noz], material=material)
CTK.replace(CTK.t, nob, noz, a)
CTK.TKTREE.updateApp()
Panels.updateRenderPanel()
CPlot.render()
def setBlending(event=None):
if CTK.t == []: return
if CTK.__MAINTREE__ <= 0:
CTK.TXT.insert('START', 'Fail on a temporary tree.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
blending = WIDGETS['blending'].get() / 100.
nzs = CPlot.getSelectedZones()
if nzs == []:
CTK.TXT.insert('START', 'Selection is empty.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
CTK.saveTree()
for nz in nzs:
nob = CTK.Nb[nz] + 1
noz = CTK.Nz[nz]
a = CPlot.addRender2Zone(CTK.t[2][nob][2][noz], blending=blending)
CTK.replace(CTK.t, nob, noz, a)
CTK.TKTREE.updateApp()
Panels.updateRenderPanel()
CPlot.render()
def createGround():
import Post.PyTree as P
alpha = CTK.varsFromWidget(VARS[1].get(), type=2)
if len(alpha) == 1:
ax = alpha[0]
ay = alpha[0]
az = alpha[0]
bx = alpha[0]
by = alpha[0]
bz = alpha[0]
elif len(alpha) == 3:
ax = alpha[0]
ay = alpha[1]
az = alpha[2]
bx = alpha[0]
by = alpha[1]
bz = alpha[2]
elif len(alpha) == 6:
ax = alpha[0]
ay = alpha[1]
az = alpha[2]
bx = alpha[3]
by = alpha[4]
bz = alpha[5]
else:
CTK.TXT.insert('START', 'Borders factor incorrect.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
try:
box = G.bbox(CTK.t)
except:
box = [0, 0, 0, 1, 1, 1]
hx = box[3] - box[0]
hy = box[4] - box[1]
hz = box[5] - box[2]
if hx < 1.e-10: hx = 0.1
if hy < 1.e-10: hy = 0.1
if hz < 1.e-10: hz = 0.001
h = max(hx, hy)
ay = ax
bx = ax
by = ax
# force square
deltax = 0.5 * (h - hx)
deltay = 0.5 * (h - hy)
hx = h * 0.5
hy = h * 0.5
hz = 0.1 * hz
b = G.cart(
(box[0] - ax * hx - deltax, box[1] - ay * hy - deltay, box[2] - hz),
(hx, hy, hz), (ax + bx + 3, ay + by + 3, 2))
b = P.exteriorFaces(b)
b = CPlot.addRender2Zone(b, material='Solid', color='White', meshOverlay=1)
# plafond (optionel)
c = G.cart((box[0] - ax * hx - deltax, box[1] - ay * hy - deltay, box[2] +
(ax + bx + 2) * hx - hz), (hx, hy, hz),
(ax + bx + 3, ay + by + 3, 1))
return [b, c]
def createBox(half=0, zpos=0):
alpha = CTK.varsFromWidget(VARS[1].get(), type=2)
if len(alpha) == 1:
ax = alpha[0]
ay = alpha[0]
az = alpha[0]
bx = alpha[0]
by = alpha[0]
bz = alpha[0]
elif len(alpha) == 3:
ax = alpha[0]
ay = alpha[1]
az = alpha[2]
bx = alpha[0]
by = alpha[1]
bz = alpha[2]
elif len(alpha) == 6:
ax = alpha[0]
ay = alpha[1]
az = alpha[2]
bx = alpha[3]
by = alpha[4]
bz = alpha[5]
else:
CTK.TXT.insert('START', 'Borders factor incorrect.\n')
CTK.TXT.insert('START', 'Error: ', 'Error')
return
if zpos == 1: az = 0 # force zmin
posCam = CPlot.getState('posCam')
posEye = CPlot.getState('posEye')
LX = posEye[0] - posCam[0]
LY = posEye[1] - posCam[1]
LZ = posEye[2] - posCam[2]
try:
box = G.bbox(CTK.t)
except:
box = [0, 0, 0, 1, 1, 1]
hx = box[3] - box[0]
hy = box[4] - box[1]
hz = box[5] - box[2]
if hx < 1.e-10: hx = 0.1
if hy < 1.e-10: hy = 0.1
if hz < 1.e-10: hz = 0.1
hx = hx * 0.5
hy = hy * 0.5
hz = hz * 0.5
ni = 3 + ax + bx
nj = 3 + ay + by
nk = 3 + az + bz
if LX < 0:
# plan xmin
b1 = G.cart((box[0] - ax * hx, box[1] - ay * hy, box[2] - az * hz),
(hx, hy, hz), (1, nj, nk))
else:
# plan xmax
b1 = G.cart((box[3] + bx * hx, box[1] - ay * hy, box[2] - az * hz),
(hx, hy, hz), (1, nj, nk))
b1 = CPlot.addRender2Zone(b1,
material='Solid',
color='White',
meshOverlay=1)
if LY < 0:
# plan ymin
b2 = G.cart((box[0] - ax * hx, box[1] - ay * hy, box[2] - az * hz),
(hx, hy, hz), (ni, 1, nk))
else:
# plan ymax
b2 = G.cart((box[0] - ax * hx, box[4] + by * hy, box[2] - az * hz),
(hx, hy, hz), (ni, 1, nk))
b2 = CPlot.addRender2Zone(b2,
material='Solid',
color='White',
meshOverlay=1)
if LZ < 0:
# plan zmin
b3 = G.cart((box[0] - ax * hx, box[1] - ay * hy, box[2] - az * hz),
(hx, hy, hz), (ni, nj, 1))
else:
b3 = G.cart((box[0] - ax * hx, box[1] - ay * hy, box[5] + bz * hz),
(hx, hy, hz), (ni, nj, 1))
b3 = CPlot.addRender2Zone(b3,
material='Solid',
color='White',
meshOverlay=1)
if half == 1: return [b1, b2, b3]
if LX >= 0:
# plan xmin
b4 = G.cart((box[0] - ax * hx, box[1] - ay * hy, box[2] - az * hz),
(hx, hy, hz), (1, nj, nk))
else:
# plan xmax
b4 = G.cart((box[3] + bx * hx, box[1] - ay * hy, box[2] - az * hz),
(hx, hy, hz), (1, nj, nk))
b4 = CPlot.addRender2Zone(b4,
material='Solid',
color='White',
meshOverlay=1)
if LY >= 0:
# plan ymin
b5 = G.cart((box[0] - ax * hx, box[1] - ay * hy, box[2] - az * hz),
(hx, hy, hz), (ni, 1, nk))
else:
# plan ymax
b5 = G.cart((box[0] - ax * hx, box[4] + by * hy, box[2] - az * hz),
(hx, hy, hz), (ni, 1, nk))
b5 = CPlot.addRender2Zone(b5,
material='Solid',
color='White',
meshOverlay=1)
if LZ >= 0:
# plan zmin
b6 = G.cart((box[0] - ax * hx, box[1] - ay * hy, box[2] - az * hz),
(hx, hy, hz), (ni, nj, 1))
else:
b6 = G.cart((box[0] - ax * hx, box[1] - ay * hy, box[5] + bz * hz),
(hx, hy, hz), (ni, nj, 1))
b6 = CPlot.addRender2Zone(b6,
material='Solid',
color='White',
meshOverlay=1)
return [b1, b2, b3, b4, b5, b6]
tsph = GP.sphere6((0, 0, 0), 1., N=3, ntype='TRI')
tsph = C.convertLO2HO(tsph, 0)
for i in range(C.getNPts(tsph)):
x = C.getValue(tsph, 'CoordinateX', i)
y = C.getValue(tsph, 'CoordinateY', i)
z = C.getValue(tsph, 'CoordinateZ', i)
nrm = sqrt(x * x + y * y + z * z)
x /= nrm
y /= nrm
z /= nrm
C.setValue(tsph, 'CoordinateX', i, x)
C.setValue(tsph, 'CoordinateY', i, y)
C.setValue(tsph, 'CoordinateZ', i, z)
tsph = T.translate(tsph, (3., 0, 0))
t = C.newPyTree(['Base1', 'Base2'])
t[2][1][2] += Ci.getZones(qsph)
t[2][2][2] += Ci.getZones(tsph)
for shader in [
"Chrome", "Glass", "Wood", 'Marble', 'XRay', 'Metal', 'Granite',
'Brick', 'Cloud', 'Gooch'
]:
s = CPlot.addRender2Zone(t, material=shader, color='White')
CPlot.display(s, mode="Render")
l = ''
while (l != 'n'):
l = CPlot.getKeyboard()
CPlot.resetKeyboard()
# - addRender2Zone (pyTree) -
import Converter.PyTree as C
import Generator.PyTree as G
import CPlot.PyTree as CPlot
a = G.cart((0, 0, 0), (1, 1, 1), (10, 10, 1))
C._initVars(a, '{Density}={CoordinateX}')
C._initVars(a, '{centers:VelocityX}={centers:CoordinateY}')
# With a material
a = CPlot.addRender2Zone(a,
material='Glass',
color='Blue',
blending=1.,
meshOverlay=1,
shaderParameters=[1., 1.])
# With field
a = CPlot.addRender2Zone(a,
material='Solid',
color='Iso:Density',
blending=1.,
meshOverlay=1,
shaderParameters=[1., 1.])
# With field+material
a = CPlot.addRender2Zone(a,
material='Chrome',
color='Iso:centers:VelocityX',
blending=1.,
meshOverlay=1,
shaderParameters=[1., 1.])
C.convertPyTree2File(a, 'out.cgns')
# - display (pyTree) - # Affichage du shader smoke (mode solid) import Geom.PyTree as D import CPlot.PyTree as CPlot import Converter.PyTree as C a = D.sphere((0, 0, 0), 1.) a = C.convertArray2Hexa(a) a = CPlot.addRender2Zone(a, material='Smoke', color='White') t = C.newPyTree(['Base', a]) CPlot.display(t, mode=2)
# - display (pyTree) - # Affichage des shaders (mode solid) import Geom.PyTree as D import CPlot.PyTree as CPlot import Transform.PyTree as T import Converter.PyTree as C import time a = D.sphere((0, 0, 0), 1.) a = CPlot.addRender2Zone(a, material='Chrome', color='White') b = T.translate(a, (0, 2.5, 0)) b = CPlot.addRender2Zone(b, material='Glass', color='Blue') c = T.translate(a, (0, 5., 0)) c = CPlot.addRender2Zone(c, material='Wood', color='Brown') d = T.translate(a, (0, 0, -2.5)) d = CPlot.addRender2Zone(d, material='Marble', color='Yellow') e = T.translate(a, (0, 2.5, -2.5)) e = CPlot.addRender2Zone(e, material='XRay', color='Blue') f = T.translate(a, (0, 5, -2.5)) f = CPlot.addRender2Zone(f, material='Metal', color='Blue') i = T.translate(a, (0, 0, -5)) i = CPlot.addRender2Zone(i, material='Granite', color='White') g = T.translate(a, (0, 2.5, -5.)) g = C.initVars(g,
# - addRender2Zone (pyTree) - import Converter.PyTree as C import Generator.PyTree as G import CPlot.PyTree as CPlot import KCore.test as test a = G.cart((0, 0, 0), (1, 1, 1), (10, 10, 1)) a = C.addBC2Zone(a, 'wall', 'BCWall', 'imin') C._initVars(a, 'F', 1.) C._initVars(a, 'centers:G', 2.) a = CPlot.addRender2Zone(a, material='Glass', color='Blue') t = C.newPyTree(['Base', 2, a]) test.testT(t, 1)