def test_edit_vs_condese(self):
data = Data('abalone', pd.read_csv(r'data/abalone.data', header=None), 8)
df = data.df.sample(n=350)
data.split_data(data_frame=df)
knn = KNN(5, data)
edit = knn.edit_data(data.train_df, 5, data.test_df, data.label_col)
data = Data('abalone', pd.read_csv(r'data/abalone.data', header=None), 8) # load data
df = data.df.sample(n=350) # minimal data frame
data.split_data(data_frame=df) # sets test and train data
cluster_obj = KNN(5, data)
condensed_data = cluster_obj.condense_data(data.train_df)
size_after = condensed_data.shape[0]
print("----------")
print(edit.shape[0])
print(size_after)
if size_after < edit.shape[0]:
print("Run condensed")
else:
print("Run edited")
def RBFREG_exp(data_config, data):
# setup data var
# data = Data('segmentation', pd.read_csv(r'data/segmentation.data', header=None), 0)
# load data
df = data.df # get the dataframe from df
print("Checking DF set")
print(df[df.columns[-1]])
# double check data is numerical
cols = df.columns
for col in cols:
df[col] = df[col].astype(float)
# split into test/train
data.split_data(data_frame=df)
if data_config == 'condensed': # Run RBF on condensed data set
cluster_obj = KNN(5, data)
data.train_df = cluster_obj.condense_data(data.train_df)
print(
"\n---------------- Running Condensed Nearest Neighbor RBF -----------------"
)
print('Size of data: ', data.train_df.shape)
rbf = RBFReg(clusters=4, maxruns=1000)
rbf2 = RBFReg(clusters=6, maxruns=1000)
rbf3 = RBFReg(clusters=8, maxruns=1000)
rbf4 = RBFReg(clusters=12, maxruns=1000)
elif data_config == 'edited': # Run RBF on edited dataset
knn = KNN(5, data)
data.train_df = knn.edit_data(data.train_df, 5, data.test_df,
data.label_col)
print(
"\n---------------- Running Edited Nearest Neighbor RBF -----------------\n"
)
print('Size of data: ', data.train_df.shape)
rbf = RBFReg(clusters=4, maxruns=1000)
rbf2 = RBFReg(clusters=6, maxruns=1000)
rbf3 = RBFReg(clusters=8, maxruns=1000)
rbf4 = RBFReg(clusters=12, maxruns=1000)
elif data_config == 'k-means': # Run RBF on K-means
print("\n---------------- Running K-Means RBF -----------------\n")
rbf = RBFRegK(clusters=4, maxruns=1000)
rbf2 = RBFRegK(clusters=6, maxruns=1000)
rbf3 = RBFRegK(clusters=8, maxruns=1000)
rbf4 = RBFRegK(clusters=12, maxruns=1000)
elif data_config == 'medoids': # Run RBF on Medoids
print("\n---------------- Running Medoids RBF -----------------\n")
rbf = RBFReg(clusters=4, maxruns=1000)
rbf2 = RBFReg(clusters=6, maxruns=1000)
rbf3 = RBFReg(clusters=8, maxruns=1000)
rbf4 = RBFReg(clusters=12, maxruns=1000)
# setup expected values for testings
expected = data.train_df[data.train_df.columns[-1]]
actual = data.test_df[data.test_df.columns[-1]]
# sets test and train data
# will have high error due to small dataset, but just a test to show how this works
expc_list = actual.values.tolist()
rbf.trainReg(data.train_df, expected, data)
predicts = rbf.predictReg(data.test_df, data)
print("predicts RBF 1")
print(predicts)
print("expected")
print(expc_list)
lf = LF()
lf.mean_squared_error(predicts, expc_list)
lf.zero_one_loss(predicts, expc_list)
# print("MSE RBF 1")
# mse = rbf.mean_squared_error(predicts, expc_list)
# print(mse)
rbf2.trainReg(data.train_df, expected, data)
predicts2 = rbf.predictReg(data.test_df, data)
print("predicts RBF 2")
print(predicts2)
print("expected")
print(expc_list)
# print("MSE RBF 2")
# mse2 = rbf2.mean_squared_error(predicts2, expc_list)
# print(mse2)
lf.mean_squared_error(predicts, expc_list)
lf.zero_one_loss(predicts, expc_list)
rbf3.trainReg(data.train_df, expected, data)
predicts3 = rbf.predictReg(data.test_df, data)
print("predicts RBF 3")
print(predicts3)
print("expected")
print(expc_list)
# print("MSE RBF 3")
# mse3 = rbf.mean_squared_error(predicts3, expc_list)
# print(mse3)
lf.mean_squared_error(predicts, expc_list)
lf.zero_one_loss(predicts, expc_list)
rbf4.trainReg(data.train_df, expected, data)
predicts4 = rbf.predictReg(data.test_df, data)
print("predicts RBF 4")
print(predicts4)
print("expected")
print(expc_list)
# print("MSE RBF 4")
# mse4 = rbf.mean_squared_error(predicts4, expc_list)
# print(mse4)
lf.mean_squared_error(predicts, expc_list)
lf.zero_one_loss(predicts, expc_list)
def RBFREG_vid(data_config, data):
# data = Data('abalone', pd.read_csv(r'data/abalone.data', header=None), 8) # load data
df = data.df.sample(
100) # get the dataframe from df, take small subsection
data_name = data.name
print("\nChecking DF set")
print(df[df.columns[-1]])
# double check data is numerical
cols = df.columns
for col in cols:
df[col] = df[col].astype(float)
# split into test/train
data.split_data(data_frame=df)
# setup expected values for testings
expected = data.train_df[data.train_df.columns[-1]]
actual = data.test_df[data.test_df.columns[-1]]
# sets test and train data
# will have high error due to small dataset, but just a test to show how this works
if data_config == 'condensed': # Run RBF on condensed data set
cluster_obj = KNN(5, data)
data.train_df = cluster_obj.condense_data(data.train_df)
print(
"\n---------------- Running Condensed Nearest Neighbor RBF Data: "
+ data_name + "-----------------")
print('Size of data: ', data.train_df.shape)
rbf = RBFReg(clusters=8, maxruns=600)
elif data_config == 'edited': # Run RBF on edited dataset
knn = KNN(5, data)
data.train_df = knn.edit_data(data.train_df, 5, data.test_df,
data.label_col)
print("\n---------------- Running Edited Nearest Neighbor RBF Data: " +
data_name + "-----------------")
print('Size of data: ', data.train_df.shape)
rbf = RBFReg(clusters=8, maxruns=600)
elif data_config == 'k-means': # Run RBF on K-means
print("\n---------------- Running K-Means RBF Data: " + data_name +
"-----------------")
rbf = RBFRegK(clusters=8, maxruns=600)
elif data_config == 'medoids': # Run RBF on Medoids
print("\n---------------- Running Mediods RBF Data: " + data_name +
"-----------------")
rbf = RBFReg(clusters=8, maxruns=600)
rbf.trainReg(data.train_df, expected, data)
print('Calculate predictions for the RBF')
predicts = rbf.predictReg(data.test_df, data)
expc_list = actual.values.tolist()
print("predicts RBF")
print(predicts)
print("expected")
print(expc_list)
lf = LF()
mse = lf.mean_squared_error(predicts, expc_list)
zeroone = lf.zero_one_loss(predicts, expc_list)
plt.plot(predicts, label=data_name + ' ' + data_config + ' prediction')
plt.plot(expc_list, label=data_name + ' ' + data_config + ' expected')
plt.plot(mse, label='MSE: ' + str(mse))
plt.plot(zeroone, label='0-1 Loss: ' + str(zeroone))
plt.legend()
plt.title('Data: ' + data_name)
plt.ylabel('Expected value/ Predicted Value')
plt.xlabel('# Predictions')
plt.savefig(
data_name + '_' + data_config
) # Code for saving a plot to image sourced from: https://pythonspot.com/matplotlib-save-figure-to-image-file/
plt.clf()
def test_edit(self):
data = Data('abalone', pd.read_csv(r'data/abalone.data', header=None), 8, False)
df = data.df.sample(n=50)
data.split_data(data_frame=df)
knn = KNN(5, data)
knn.edit_data(data.train_df, 5, data.test_df, data.label_col)