def __apply_configuration__(self) :
from Configurables import ( GaudiSequencer, CombineParticles )
from PhysSelPython.Wrappers import Selection, SelectionSequence, DataOnDemand
if not self.isPropertySet("Sequencer") :
raise RuntimeError("ERROR : Sequence not set")
seq = self.getProp("Sequencer")
if self.getProp("RunSelection") :
# STD particles
from StandardParticles import StdLooseMuons
# J/psi -> mu mu
JPsiMuMuName = self.__sel_name__
JPsiMuMu = CombineParticles(JPsiMuMuName)
JPsiMuMu.DecayDescriptor = "J/psi(1S) -> mu+ mu- "
JPsiMuMu.CombinationCut = "(ADAMASS('J/psi(1S)') < 150*MeV)"
JPsiMuMu.MotherCut = "(ADMASS('J/psi(1S)') < 130*MeV) & (VFASPF(VCHI2/VDOF)<6) & (PT > 2500*MeV)"
JPsiMuMu.DaughtersCuts = {"mu+" : "(PT>1400*MeV)"\
"& (P>5*GeV)"\
"& (TRCHI2DOF<2.0)"\
"& (PPINFO(LHCb.ProtoParticle.MuonBkgLL,-10000)<-2.5)"\
"& (PPINFO(LHCb.ProtoParticle.MuonMuLL,-10000)>-10)"}
self.setOptions(JPsiMuMu)
JPsiMuMuSel = Selection( JPsiMuMuName+'Sel',
Algorithm = JPsiMuMu,
RequiredSelections = [StdLooseMuons] )
# Selection Sequence
selSeq = SelectionSequence( self.__sel_name__+'Seq', TopSelection = JPsiMuMuSel )
# Run the selection sequence.
seq.Members += [selSeq.sequence()]
# Particle Monitoring plots
if self.getProp("RunMonitors") :
from Configurables import ( ParticleMonitor )
plotter = ParticleMonitor(self.__sel_name__+"Plots")
if self.getProp("RunSelection") :
plotter.Inputs = [ 'Phys/'+self.__sel_name__+'Sel' ]
else:
musel = "(PT>1400*MeV) & (P>5*GeV) & (TRCHI2DOF<2.0) & "\
"(PPINFO(LHCb.ProtoParticle.MuonBkgLL,-10000)<-2.5) & "\
"(PPINFO(LHCb.ProtoParticle.MuonMuLL,-10000)>-10)"
_code = "( ( INTREE( ('mu+'==ID) & "+musel+" ) ) | ( INTREE( ('mu-'==ID) & "+musel+" ) ) )"
from Configurables import FilterDesktop
filter = FilterDesktop( name = self.__sel_name__+"RICHFiltered",
Code = _code,
Inputs = self.getProp("Candidates") )
plotter.Inputs = [ 'Phys/'+filter.name() ]
seq.Members += [filter]
plotter.PeakCut = "(ADMASS('J/psi(1S)')<20*MeV)" # Considering sigma = 13
plotter.SideBandCut = "(ADMASS('J/psi(1S)')>20*MeV)" # Considering sigma = 13
plotter.PlotTools = self.getProp("PlotTools")
self.setOptions(plotter)
seq.Members += [plotter]
# Make a DST ?
if self.getProp("MakeSelDST"):
# Prescale
from Configurables import DeterministicPrescaler
scaler = DeterministicPrescaler( self.__sel_name__+'PreScale',
AcceptFraction = self.getProp("DSTPreScaleFraction") )
seq.Members += [scaler]
# Write the DST
MyDSTWriter = SelDSTWriter( self.__sel_name__+"DST",
SelectionSequences = [ selSeq ],
OutputPrefix = self.__sel_name__ )
seq.Members += [MyDSTWriter.sequence()]
# MC Performance checking ?
if self.getProp("MCChecks") :
from Configurables import ParticleEffPurMoni
mcPerf = ParticleEffPurMoni(JPsiMuMuName+"MCPerf")
mcPerf.Inputs = ['Phys/'+self.__sel_name__+'Sel']
self.setOptions(mcPerf)
seq.Members += [mcPerf]
# Ntuple ?
if self.getProp("MakeNTuple") :
from Configurables import ( DecayTreeTuple,
TupleToolDecay,
LoKi__Hybrid__FilterCriterion,
LoKi__Hybrid__TupleTool,
TupleToolMCBackgroundInfo,
BackgroundCategory,
TupleToolTrigger,
TupleToolMCTruth,
MCTupleToolKinematic,
MCTupleToolHierarchy,
TupleToolVtxIsoln,
TupleToolP2VV
)
JPsiMuMuTree = DecayTreeTuple( JPsiMuMuName + 'Tuple')
JPsiMuMuTree.Inputs = [ 'Phys/'+JPsiMuMuName]
JPsiMuMuTree.Decay = 'J/psi(1S) -> ^mu+ ^mu- '
# set some names for ntuple branchs
MyBranch_jpsi = "jpsi"
MyBranch_mup = "mup"
MyBranch_mum = "mum"
# label the branches for the particle tools
JPsiMuMuTree.Branches = {
MyBranch_jpsi : "J/psi(1S) : J/psi(1S) -> mu+ mu- ",
MyBranch_mup : "J/psi(1S) -> ^mu+ mu- ",
MyBranch_mum : "J/psi(1S) -> mu+ ^mu- ",
}
JPsiMuMuTree.ToolList = [
"TupleToolEventInfo"
, "TupleToolGeneration"
, "TupleToolMCTruth"
, "TupleToolMCBackgroundInfo"
, "MCTupleToolKinematic"
, "TupleToolPrimaries"
, "TupleToolVtxIsoln"
, "TupleToolTrackInfo"
, "TupleToolPid"
, "TupleToolGeometry"
, "TupleToolKinematic"
, "TupleToolPropertime"
, "TupleToolPid"
, "TupleToolPrimaries"
, "TupleToolTrigger"
]
JPsiMuMuTree.addTool(BackgroundCategory())
JPsiMuMuTree.BackgroundCategory.SoftPhotonCut = 2000
JPsiMuMuTree.OutputLevel = INFO
JPsiMuMuTree.addTool(TupleToolTrigger())
JPsiMuMuTree.TupleToolTrigger.VerboseL0 = True
JPsiMuMuTree.addTool(TupleToolMCTruth())
JPsiMuMuTree.TupleToolMCTruth.addTool(MCTupleToolKinematic())
JPsiMuMuTree.TupleToolMCTruth.addTool(MCTupleToolHierarchy())
JPsiMuMuTree.TupleToolMCTruth.ToolList = [
"MCTupleToolKinematic" ,
"MCTupleToolHierarchy"
]
JPsiMuMuTree.TupleToolMCTruth.MCTupleToolKinematic.StoreKineticInfo = True
JPsiMuMuTree.TupleToolMCTruth.MCTupleToolKinematic.StoreVertexInfo = True
JPsiMuMuTree.TupleToolMCTruth.MCTupleToolKinematic.StorePropertimeInfo = False
JPsiMuMuTree.addTool(TupleToolVtxIsoln( OutputLevel = 6 ))
JPsiMuMuTree.TupleToolVtxIsoln.IP = 2.0
JPsiMuMuTree.TupleToolVtxIsoln.InputParticles = [ "Phys/StdLooseMuons"]
seq.Members += [JPsiMuMuTree]
JPsiMuMuTree.NTupleLUN = "JPSIMUMU"
from Configurables import NTupleSvc
NTupleSvc().Output = ["JPSIMUMU DATAFILE='JpsiMuMu_Presel.root' TYP='ROOT' OPT='NEW'"]
def __apply_configuration__(self):
from Configurables import (GaudiSequencer, CombineParticles,
OfflineVertexFitter)
from PhysSelPython.Wrappers import Selection, SelectionSequence, DataOnDemand
seq = self.getProp("Sequencer")
if seq == None: raise RuntimeError("ERROR : Sequence not set")
if self.getProp("RunSelection"):
# STD particles
from StandardParticles import StdNoPIDsPions, StdNoPIDsKaons
# phi -> K+ K-
Phi2KKName = self.__sel_name__ + "_Phi2KK"
Phi2KK = CombineParticles(Phi2KKName)
Phi2KK.DecayDescriptor = "phi(1020) -> K+ K-"
Phi2KK.CombinationCut = "(ADAMASS('phi(1020)')<75*MeV)"
Phi2KK.MotherCut = "(ADMASS('phi(1020)')<50*MeV) & (BPVVDCHI2>60) & (MIPDV(PRIMARY)<0.5) & (VFASPF(VCHI2) < 20)"
Phi2KK.DaughtersCuts = {
"K+":
"(PT>300*MeV) & (P>2*GeV) & (MIPDV(PRIMARY) < 0.5) & (BPVIPCHI2() > 20)",
"K-":
"(PT>300*MeV) & (P>2*GeV) & (MIPDV(PRIMARY) < 0.5) & (BPVIPCHI2() > 20)"
}
self.setOptions(Phi2KK)
Phi2KKSel = Selection(Phi2KKName + 'Sel',
Algorithm=Phi2KK,
RequiredSelections=[StdNoPIDsKaons])
# Bs -> J/psi phi
Ds2piPhiName = self.__sel_name__
Ds2piPhi = CombineParticles(Ds2piPhiName)
Ds2piPhi.DecayDescriptor = "[D_s+ -> pi+ phi(1020)]cc"
Ds2piPhi.addTool(OfflineVertexFitter)
Ds2piPhi.ParticleCombiners.update({"": "OfflineVertexFitter"})
Ds2piPhi.OfflineVertexFitter.useResonanceVertex = True
Ds2piPhi.CombinationCut = "(ADAMASS('D_s+')<75*MeV)"
Ds2piPhi.MotherCut = "(ADMASS('D_s+')<50*MeV) & (BPVDIRA>0.9999) & (BPVVDCHI2>85) & (MIPDV(PRIMARY)<0.1) & (VFASPF(VCHI2) < 10)"
Ds2piPhi.DaughtersCuts = {
"pi+":
"(PT>300*MeV) & (P>2*GeV) & (MIPDV(PRIMARY) >0.1) & (BPVIPCHI2() > 20)"
}
self.setOptions(Ds2piPhi)
Ds2piPhiSel = Selection(
Ds2piPhiName + 'Sel',
Algorithm=Ds2piPhi,
RequiredSelections=[Phi2KKSel, StdNoPIDsPions])
# Selection Sequence
selSeq = SelectionSequence(self.__sel_name__ + 'Seq',
TopSelection=Ds2piPhiSel)
# Run the selection sequence.
seq.Members += [selSeq.sequence()]
# Particle Monitoring plots
if self.getProp("RunMonitors"):
from Configurables import ParticleMonitor
plotter = ParticleMonitor(self.__sel_name__ + "Plots")
if self.getProp("RunSelection"):
plotter.Inputs = ['Phys/' + self.__sel_name__ + 'Sel']
else:
plotter.Inputs = self.getProp("Candidates")
plotter.PeakCut = "(ADMASS('D_s+')<100*MeV)"
plotter.SideBandCut = "(ADMASS('D_s+')>100*MeV)"
plotter.PlotTools = self.getProp("PlotTools")
self.setOptions(plotter)
seq.Members += [plotter]
# Make a DST ?
if self.getProp("MakeSelDST"):
# Prescale
from Configurables import DeterministicPrescaler
scaler = DeterministicPrescaler(
self.__sel_name__ + 'PreScale',
AcceptFraction=self.getProp("DSTPreScaleFraction"))
seq.Members += [scaler]
# Write the DST
MyDSTWriter = SelDSTWriter(self.__sel_name__ + "DST",
SelectionSequences=[selSeq],
OutputPrefix=self.__sel_name__)
seq.Members += [MyDSTWriter.sequence()]
# MC Performance checking ?
if self.getProp("MCChecks"):
from Configurables import ParticleEffPurMoni
mcPerf = ParticleEffPurMoni(Ds2piPhiName + "MCPerf")
mcPerf.Inputs = ['Phys/' + self.__sel_name__ + 'Sel']
self.setOptions(mcPerf)
seq.Members += [mcPerf]
# Ntuple ?
if self.getProp("MakeNTuple"):
outputLevel = INFO
from Configurables import (
DecayTreeTuple, TupleToolDecay, TupleToolMCTruth,
TupleToolMCBackgroundInfo, TupleToolGeometry,
TupleToolKinematic, TupleToolPrimaries, TupleToolEventInfo,
MCTupleToolHierarchy, MCTupleToolKinematic, TupleToolPid,
TupleToolTrackInfo, TupleToolVtxIsoln, LoKi__Hybrid__TupleTool)
Tuple = DecayTreeTuple(Ds2piPhiName + "Tuple")
Tuple.Inputs = ["Phys/" + Ds2piPhiName]
Tuple.Decay = "[D_s+ -> ^pi+ (^phi(1020) => ^K+ ^K-)]cc"
Tuple.Branches = {
"pion": "[D_s+ -> ^pi+ (phi(1020) => K+ K-)]cc",
"kaonplus": "[D_s+ -> pi+ (phi(1020) => ^K+ K-)]cc",
"kaonminus": "[D_s+ -> pi+ (phi(1020) => K+ ^K-)]cc",
"phi": "[D_s+ -> pi+ (^phi(1020) => K+ K-)]cc",
"D_s": "[D_s+]cc :[D_s+ -> pi+ (phi(1020) => K+ K-)]cc"
}
Tuple.addTool(TupleToolDecay, name='pion')
Tuple.addTool(TupleToolDecay, name='phi')
Tuple.addTool(TupleToolDecay, name='kaonplus')
Tuple.addTool(TupleToolDecay, name='kaonminus')
Tuple.addTool(TupleToolDecay, name='D_s')
# k+ specific
kaonplusLoKiTool = LoKi__Hybrid__TupleTool('kaonplusLoKiTool')
kaonplusLoKiTool.Variables = {
"LOKI_PIDK": "PIDK",
"LOKI_PIDe": "PIDe",
"LOKI_PIDpi": "PIDpi",
"LOKI_PIDp": "PIDp",
"LOKI_PIDmu": "PIDmu",
"LOKI_PIDK_PIDpi": "PIDK-PIDpi",
"LOKI_PIDK_PIDe": "PIDK-PIDe",
"LOKI_PIDK_PIDmu": "PIDK-PIDmu",
"LOKI_PIDK_PIDp": "PIDK-PIDp"
}
Tuple.kaonplus.addTool(kaonplusLoKiTool, name='kaonplusLoKiTool')
Tuple.kaonplus.ToolList = [
'LoKi::Hybrid::TupleTool/kaonplusLoKiTool'
]
# k- specific
kaonminusLoKiTool = LoKi__Hybrid__TupleTool('kaonminusLoKiTool')
kaonminusLoKiTool.Variables = {
"LOKI_PIDK": "PIDK",
"LOKI_PIDe": "PIDe",
"LOKI_PIDpi": "PIDpi",
"LOKI_PIDp": "PIDp",
"LOKI_PIDmu": "PIDmu",
"LOKI_PIDK_PIDpi": "PIDK-PIDpi",
"LOKI_PIDK_PIDe": "PIDK-PIDe",
"LOKI_PIDK_PIDmu": "PIDK-PIDmu",
"LOKI_PIDK_PIDp": "PIDK-PIDp"
}
Tuple.kaonminus.addTool(kaonminusLoKiTool,
name='kaonminusLoKiTool')
Tuple.kaonminus.ToolList = [
'LoKi::Hybrid::TupleTool/kaonminusLoKiTool'
]
# pi+ specific
pionLoKiTool = LoKi__Hybrid__TupleTool('pionLoKiTool')
pionLoKiTool.Variables = {
"LOKI_PIDK": "PIDK",
"LOKI_PIDe": "PIDe",
"LOKI_PIDpi": "PIDpi",
"LOKI_PIDp": "PIDp",
"LOKI_PIDmu": "PIDmu",
"LOKI_PIDpi_PIDK": "PIDpi-PIDK",
"LOKI_PIDpi_PIDe": "PIDpi-PIDe",
"LOKI_PIDpi_PIDmu": "PIDpi-PIDmu",
"LOKI_PIDpi_PIDp": "PIDpi-PIDp"
}
Tuple.pion.addTool(pionLoKiTool, name='pionLoKiTool')
Tuple.pion.ToolList = ['LoKi::Hybrid::TupleTool/pionLoKiTool']
# phi specific
phiLoKiTool = LoKi__Hybrid__TupleTool('phiLoKiTool')
phiLoKiTool.Variables = {}
Tuple.phi.addTool(phiLoKiTool, name='phiLoKiTool')
Tuple.phi.ToolList = ['LoKi::Hybrid::TupleTool/phiLoKiTool']
# D_s specific
DsLoKiTool = LoKi__Hybrid__TupleTool('DsLoKiTool')
DsLoKiTool.Variables = {}
Tuple.D_s.addTool(DsLoKiTool, name='DsLoKiTool')
Tuple.D_s.ToolList = ["LoKi::Hybrid::TupleTool/DsLoKiTool"]
# Common to all particles
LoKiTool = LoKi__Hybrid__TupleTool('LoKiTool')
LoKiTool.Variables = {
"LOKI_ABSID": "ABSID",
"LOKI_BPVIPCHI2": "BPVIPCHI2()",
"LOKI_BPVDIRA": "BPVDIRA",
"LOKI_BPVLTFITCHI2":
"BPVLTFITCHI2('PropertimeFitter/properTime:PUBLIC')",
"LOKI_BPVLTCHI2":
"BPVLTCHI2('PropertimeFitter/properTime:PUBLIC')",
"LOKI_BPVLTIME":
"BPVLTIME('PropertimeFitter/properTime:PUBLIC')",
"LOKI_BPVVDCHI2": "BPVVDCHI2",
"LOKI_ID": "ID",
"LOKI_MIPDV_PRIMARY": "MIPDV(PRIMARY)",
"LOKI_MIPCHI2DV_PRIMARY": "MIPCHI2DV(PRIMARY)",
"LOKI_MM": "MM",
"LOKI_M": "M",
"LOKI_P": "P",
"LOKI_PT": "PT",
"LOKI_TRCHI2": "TRCHI2",
"LOKI_TRCHI2DOF": "TRCHI2DOF",
"LOKI_VFASPF_VCHI2": "VFASPF(VCHI2)",
"LOKI_VFASPF_VDOF": "VFASPF(VDOF)"
}
Tuple.addTool(LoKiTool, name='LoKiTool')
Tuple.ToolList = [
"LoKi::Hybrid::TupleTool/LoKiTool", "TupleToolEventInfo",
"TupleToolGeometry", "TupleToolKinematic",
"TupleToolMCBackgroundInfo", "TupleToolPid",
"TupleToolPrimaries", "TupleToolTrackInfo",
"TupleToolVtxIsoln", "TupleToolMCTruth"
]
Tuple.addTool(TupleToolEventInfo)
Tuple.TupleToolEventInfo.OutputLevel = outputLevel
Tuple.addTool(TupleToolGeometry)
Tuple.TupleToolGeometry.OutputLevel = outputLevel
Tuple.addTool(TupleToolKinematic)
Tuple.TupleToolKinematic.OutputLevel = outputLevel
Tuple.addTool(TupleToolMCBackgroundInfo)
Tuple.TupleToolMCBackgroundInfo.OutputLevel = outputLevel
Tuple.addTool(MCTupleToolHierarchy)
Tuple.MCTupleToolHierarchy.OutputLevel = outputLevel
Tuple.addTool(TupleToolMCTruth)
Tuple.TupleToolMCTruth.OutputLevel = outputLevel
Tuple.TupleToolMCTruth.addTool(MCTupleToolKinematic())
Tuple.TupleToolMCTruth.addTool(MCTupleToolHierarchy())
Tuple.TupleToolMCTruth.ToolList = [
"MCTupleToolKinematic", "MCTupleToolHierarchy"
]
Tuple.TupleToolMCTruth.MCTupleToolKinematic.StoreKineticInfo = True
Tuple.TupleToolMCTruth.MCTupleToolKinematic.StoreVertexInfo = True
Tuple.TupleToolMCTruth.MCTupleToolKinematic.StorePropertimeInfo = True
Tuple.TupleToolMCTruth.MCTupleToolKinematic.OutputLevel = outputLevel
Tuple.addTool(TupleToolPid)
Tuple.TupleToolPid.OutputLevel = outputLevel
Tuple.addTool(TupleToolPrimaries)
Tuple.TupleToolPrimaries.OutputLevel = outputLevel
Tuple.addTool(TupleToolTrackInfo)
Tuple.TupleToolTrackInfo.OutputLevel = outputLevel
Tuple.addTool(TupleToolVtxIsoln)
Tuple.TupleToolVtxIsoln.OutputLevel = outputLevel
seq.Members += [Tuple]
Tuple.NTupleLUN = "DSPHIPI"
from Configurables import NTupleSvc
NTupleSvc().Output = [
"DSPHIPI DATAFILE='DsToPhiPi.root' TYP='ROOT' OPT='NEW'"
]
from Gaudi.Configuration import *
from Configurables import CombineParticles, ParticleMonitor, DaVinci
muonPIDLaSeq = GaudiSequencer("MuonPIDLambdaSequence")
LambdaCalibDDName = "MuonLambdaCalibDD"
LambdaCalibDD = CombineParticles(LambdaCalibDDName)
LambdaCalibDD.InputLocations = ["StdNoPIDsDownPions", "StdNoPIDsDownProtons"]
LambdaCalibDD.DecayDescriptor = "[Lambda0 -> p+ pi-]cc"
LambdaCalibDD.CombinationCut = "(ADAMASS('Lambda0')<100*MeV)"
LambdaCalibDD.DaughtersCuts = {
"p+":
"(P>3000*MeV) & (PT>100*MeV) & (ISDOWN) & (0.5<PPINFO(LHCb.ProtoParticle.InAccMuon,-1))",
"pi-":
"(P>3000*MeV) & (PT>100*MeV) & (ISDOWN) & (0.5<PPINFO(LHCb.ProtoParticle.InAccMuon,-1))"
}
LambdaCalibDD.MotherCut = " (VFASPF(VCHI2)<5) & (500<BPVVDZ) & (BPVVDZ<2000) & (BPVDIRA>0.9999995) "
muonPIDLaSeq.Members += [LambdaCalibDD]
plotLamDD = ParticleMonitor("MuonLamdaDDMoni")
plotLamDD.InputLocations = [LambdaCalibDDName]
plotLamDD.PeakCut = "(ADMASS('Lambda0')<10*MeV)"
plotLamDD.SideBandCut = "(ADMASS('Lambda0')>20*MeV)"
plotLamDD.PlotTools = ["MassPlotTool"]
muonPIDLaSeq.Members += [plotLamDD]
##############################################################################
#
# Add Sequences to Monitors
#
DaVinci().MoniSequence += [muonPIDLaSeq] # Muon PID Lambda sequence
]
Jpsi2MuPi.DecayDescriptor = "[J/psi(1S) -> mu+ pi-]cc"
# a good muon and any pion
Jpsi2MuPi.DaughtersCuts = {
"pi+": "(P>1*GeV)",
"mu+": "(P>10*GeV) & (PT>1*GeV)"
}
Jpsi2MuPi.CombinationCut = "(ADAMASS('J/psi(1S)')<100*MeV)"
Jpsi2MuPi.MotherCut = "(ALL)"
JpsiSeq.Members += [Jpsi2MuPi]
##############################################################################
#
# Plot quantities
#
from Configurables import ParticleMonitor
plotter = ParticleMonitor("Jpsi2MuPiMoni")
plotter.Inputs = ["Phys/Jpsi2MuPi/Particles"]
plotter.PeakCut = "(ADMASS('J/psi(1S)')<5*MeV)"
plotter.SideBandCut = "(ADMASS('J/psi(1S)')>20*MeV)"
plotter.PlotTools = [
"MassPlotTool", "MomentumPlotTool", "CombinedPidPlotTool", "RichPlotTool",
"CaloPlotTool", "MuonPlotTool"
]
JpsiSeq.Members += [plotter]
##############################################################################
#
#
#
from Configurables import DaVinci
DaVinci().MoniSequence += [JpsiSeq]
def __apply_configuration__(self):
from Configurables import (GaudiSequencer, CombineParticles,
FilterDesktop)
from PhysSelPython.Wrappers import Selection, SelectionSequence, DataOnDemand
if not self.isPropertySet("Sequencer"):
raise RuntimeError("ERROR : Sequence not set")
seq = self.getProp("Sequencer")
if self.getProp("RunSelection"):
# STD particles
from StandardParticles import StdNoPIDsPions
# Filter Pi Tracks
pionFilterName = self.__sel_name__ + "_PiFilter"
pionfilter = FilterDesktop(pionFilterName)
pionfilter.Code = "(ISLONG) & (TRCHI2DOF < 5) & (P > 2*GeV) & (MIPCHI2DV(PRIMARY) > 30)"
self.setOptions(pionfilter)
pionfilterSel = Selection(pionFilterName + 'Sel',
Algorithm=pionfilter,
RequiredSelections=[StdNoPIDsPions])
# Make the KS0
ks02pipi = CombineParticles(self.__sel_name__)
ks02pipi.DecayDescriptor = "KS0 -> pi+ pi-"
ks02pipi.CombinationCut = "(ADAMASS('KS0') < 200*MeV) & (AMAXDOCA('') < 0.6*mm)"
ks02pipi.MotherCut = "(ADMASS('KS0') < 100*MeV) & (VFASPF(VCHI2/VDOF) < 10) & (MIPDV(PRIMARY) < 0.75) & (BPVVDCHI2 > 150) & (MIPCHI2DV(PRIMARY) < 100) & ( ADWM( 'Lambda0' , WM( 'p+' , 'pi-') ) > 8*MeV ) & ( ADWM( 'Lambda0' , WM( 'pi+' , 'p~-') ) > 8*MeV )"
self.setOptions(ks02pipi)
ks02pipiSel = Selection(self.__sel_name__ + 'Sel',
Algorithm=ks02pipi,
RequiredSelections=[pionfilterSel])
# Selection Sequence
selSeq = SelectionSequence(self.__sel_name__ + 'Seq',
TopSelection=ks02pipiSel)
# Run the selection sequence.
seq.Members += [selSeq.sequence()]
# Particle Monitoring plots
if self.getProp("RunMonitors"):
from Configurables import ParticleMonitor
plotter = ParticleMonitor(self.__sel_name__ + "Plots")
if self.getProp("RunSelection"):
plotter.Inputs = ['Phys/' + self.__sel_name__ + 'Sel']
else:
plotter.Inputs = self.getProp("Candidates")
plotter.PeakCut = "(ADMASS('KS0')<7*MeV)"
plotter.SideBandCut = "(ADMASS('KS0')>7*MeV)"
plotter.PlotTools = self.getProp("PlotTools")
self.setOptions(plotter)
seq.Members += [plotter]
# Make a DST ?
if self.getProp("MakeSelDST"):
# Prescale
from Configurables import DeterministicPrescaler
scaler = DeterministicPrescaler(
self.__sel_name__ + 'PreScale',
AcceptFraction=self.getProp("DSTPreScaleFraction"))
seq.Members += [scaler]
# Write the DST
MyDSTWriter = SelDSTWriter(self.__sel_name__ + "DST",
SelectionSequences=[selSeq],
OutputPrefix=self.__sel_name__)
seq.Members += [MyDSTWriter.sequence()]
# MC Performance checking ?
if self.getProp("MCChecks"):
from Configurables import ParticleEffPurMoni
#mcPerfPi = ParticleEffPurMoni("StdNoPIDsPionsMCPerf")
#mcPerfPi.Inputs = ["Phys/StdNoPIDsPions"]
#mcPerfPi.OutputLevel = DEBUG
#seq.Members += [mcPerfPi]
#mcPerfPiFilt = ParticleEffPurMoni(pionFilterName+"MCPerf")
#mcPerfPiFilt.Inputs = ["Phys/"+pionFilterName]
#seq.Members += [mcPerfPiFilt]
mcPerfD = ParticleEffPurMoni(ks02pipiName + "MCPerf")
mcPerfD.Inputs = ["Phys/" + ks02pipiName]
self.setOptions(mcPerfD)
seq.Members += [mcPerfD]
# Ntuple ?
if self.getProp("MakeNTuple"): pass
from Configurables import CombineParticles, ParticleMonitor, DaVinci
muonPIDJpSeq = GaudiSequencer("MuonPIDJpsiSequence")
JpsiCalibName = "MuonJpsiCalib"
JpsiCalib = CombineParticles(JpsiCalibName)
JpsiCalib.InputLocations = ["StdNoPIDsMuons"]
JpsiCalib.DecayDescriptor = "J/psi(1S) -> mu+ mu-"
JpsiCalib.CombinationCut = "(ADAMASS('J/psi(1S)')<300*MeV)"
muonscut = "(TRCHI2DOF<3) & (P>3*GeV) & (PT>500*MeV) & (ISLONG) & (0.5<PPINFO(LHCb.ProtoParticle.InAccMuon,-1)) & (PPINFO(LHCb.ProtoParticle.CaloEcalE,-10000)<800*MeV) & (PPINFO(LHCb.ProtoParticle.CaloHcalE,-10000)<4000*MeV) & (PPINFO(LHCb.ProtoParticle.CaloEcalE,-10000)>-10*MeV) & (PPINFO(LHCb.ProtoParticle.CaloHcalE,-10000)>1000*MeV)"
JpsiCalib.DaughtersCuts = {"mu+": muonscut, "mu-": muonscut}
childcuts = " ( ((CHILDCUT(ISMUON,1)) & (CHILDCUT((PT>1*GeV),1)) & (CHILDCUT((P>10*GeV),1)) ) | ((CHILDCUT(ISMUON,2)) & (CHILDCUT((PT>1*GeV),2)) & (CHILDCUT((P>10*GeV),2))) ) "
JpsiCalib.MotherCut = "(VFASPF(VCHI2/VDOF)<3) & " + childcuts
childcuts = " ( ((CHILDCUT(ISMUON,1)) & (CHILDCUT((PT>1*GeV),1)) & (CHILDCUT((P>10*GeV),1)) ) | ((CHILDCUT(ISMUON,2)) & (CHILDCUT((PT>1*GeV),2)) & (CHILDCUT((P>10*GeV),2))) ) "
JpsiCalib.MotherCut = "(VFASPF(VCHI2/VDOF)<3) & " + childcuts
muonPIDJpSeq.Members += [JpsiCalib]
plotJPsiPr = ParticleMonitor("MuonJpsiPromptMoni")
plotJPsiPr.InputLocations = [JpsiCalibName]
plotJPsiPr.PeakCut = "(ADMASS('J/psi(1S)')<50*MeV)"
plotJPsiPr.SideBandCut = "(ADMASS('J/psi(1S)')>100*MeV)"
plotJPsiPr.PlotTools = ["MassPlotTool"]
muonPIDJpSeq.Members += [plotJPsiPr]
##############################################################################
#
# Add Sequences to Monitors
#
DaVinci().MoniSequence += [muonPIDJpSeq] # Muon PID Jpsi sequence
def __apply_configuration__(self) :
from Configurables import ( GaudiSequencer,
CombineParticles, FilterDesktop )
from PhysSelPython.Wrappers import Selection, SelectionSequence, DataOnDemand
if not self.isPropertySet("Sequencer") :
raise RuntimeError("ERROR : Sequence not set")
seq = self.getProp("Sequencer")
if self.getProp("RunSelection") :
# STD particles
from StandardParticles import StdNoPIDsPions, StdNoPIDsProtons
# Filter Pi Tracks
pionfilterName = self.__sel_name__+"_PiFilter"
pionfilter = FilterDesktop(pionfilterName)
pionfilter.Code = "(ISLONG) & (TRCHI2DOF < 3) & (PT > 0.1*GeV) & (MIPCHI2DV(PRIMARY) > 9)"
self.setOptions(pionfilter)
pionfilterSel = Selection( pionfilterName+'Sel',
Algorithm = pionfilter,
RequiredSelections = [StdNoPIDsPions] )
# Filter Proton Tracks
protonfilterName = self.__sel_name__+"_PrFilter"
protonfilter = FilterDesktop(protonfilterName)
protonfilter.Code = "(ISLONG) & (TRCHI2DOF < 3) & (PT > 0.4*GeV) & (MIPCHI2DV(PRIMARY) > 9)"
self.setOptions(protonfilter)
protonfilterSel = Selection( protonfilterName+'Sel',
Algorithm = protonfilter,
RequiredSelections = [StdNoPIDsProtons] )
# Make the Lambda
lambda2ppi = CombineParticles(self.__sel_name__)
lambda2ppi.DecayDescriptor = "[ Lambda0 -> p+ pi- ]cc"
lambda2ppi.CombinationCut = "(ADAMASS('Lambda0') < 100*MeV) & (AMAXDOCA('') < 0.2*mm)"
lambda2ppi.MotherCut = "(ADMASS('Lambda0') < 50.0*MeV) & (PT > 0.5*GeV) & (VFASPF(VCHI2/VDOF) < 6.0) & (MIPDV(PRIMARY) < 0.5) & (BPVVDCHI2 > 750) & (MIPCHI2DV(PRIMARY) < 200) & ( ADWM( 'KS0' , WM( 'pi+' , 'pi-') ) > 15*MeV ) & (LV01 < 0.98) & (LV02 < 0.98) & (LV01 > -0.98) & (LV02 > -0.98)"
self.setOptions(lambda2ppi)
lambda2ppiSel = Selection( self.__sel_name__+'Sel',
Algorithm = lambda2ppi,
RequiredSelections = [pionfilterSel,protonfilterSel] )
# Selection Sequence
selSeq = SelectionSequence( self.__sel_name__+'Seq', TopSelection = lambda2ppiSel )
# Run the selection sequence.
seq.Members += [selSeq.sequence()]
# Particle Monitoring plots
if self.getProp("RunMonitors") :
from Configurables import ParticleMonitor
plotter = ParticleMonitor(self.__sel_name__+"Plots")
if self.getProp("RunSelection") :
plotter.Inputs = [ 'Phys/'+self.__sel_name__+'Sel' ]
else:
plotter.Inputs = self.getProp("Candidates")
plotter.PeakCut = "(ADMASS('Lambda0')<2*MeV)"
plotter.SideBandCut = "(ADMASS('Lambda0')>2*MeV)"
plotter.PlotTools = self.getProp("PlotTools")
self.setOptions(plotter)
seq.Members += [ plotter ]
# Make a DST ?
if self.getProp("MakeSelDST"):
# Prescale
from Configurables import DeterministicPrescaler
scaler = DeterministicPrescaler( self.__sel_name__+'PreScale',
AcceptFraction = self.getProp("DSTPreScaleFraction") )
seq.Members += [scaler]
# Write the DST
MyDSTWriter = SelDSTWriter( self.__sel_name__+"DST",
SelectionSequences = [ selSeq ],
OutputPrefix = self.__sel_name__ )
seq.Members += [MyDSTWriter.sequence()]
# MC Performance checking ?
if self.getProp("MCChecks") :
from Configurables import ParticleEffPurMoni
mcPerf = ParticleEffPurMoni(lambda2ppiName+"MCPerf")
mcPerf.Inputs = ["Phys/"+lambda2ppiName]
self.setOptions(mcPerf)
seq.Members += [mcPerf]
# Ntuple ?
if self.getProp("MakeNTuple") : pass
def __apply_configuration__(self):
from Configurables import (GaudiSequencer, CombineParticles,
FilterDesktop)
from PhysSelPython.Wrappers import Selection, SelectionSequence, DataOnDemand
if not self.isPropertySet("Sequencer"):
raise RuntimeError("ERROR : Sequence not set")
seq = self.getProp("Sequencer")
if self.getProp("RunSelection"):
# STD particles
from StandardParticles import StdNoPIDsPions, StdNoPIDsKaons
# Filter Pi/K Tracks
trackfilterName = self.__sel_name__ + "_TrackFilter"
trackfilter = FilterDesktop(trackfilterName)
trackfilter.Code = "(PT > 0.4*GeV) & (P > 2.0*GeV) & (TRCHI2DOF < 10) & (MIPCHI2DV(PRIMARY) > 6)"
self.setOptions(trackfilter)
trackfilterSel = Selection(
trackfilterName + 'Sel',
Algorithm=trackfilter,
RequiredSelections=[StdNoPIDsPions, StdNoPIDsKaons])
# Filter Pi Tracks
pionfilterName = self.__sel_name__ + "_PiFilter"
pionfilter = FilterDesktop(pionfilterName)
pionfilter.Code = "(PT > 110*MeV) & (MIPCHI2DV(PRIMARY) > 2)"
self.setOptions(pionfilter)
pionfilterSel = Selection(pionfilterName + 'Sel',
Algorithm=pionfilter,
RequiredSelections=[StdNoPIDsPions])
# Make the D0
d02kpiName = self.__sel_name__ + "_D0ToKPiSel"
d02kpi = CombineParticles(d02kpiName)
d02kpi.DecayDescriptor = "[ D0 -> K- pi+ ]cc"
d02kpi.CombinationCut = "(ADAMASS('D0') < 100*MeV)"
d02kpi.MotherCut = "(ADMASS('D0') < 50.0*MeV)"\
"& (PT > 1.00*GeV)"\
"& (VFASPF(VCHI2/VDOF)< 10.0)"\
"& (BPVDIRA > 0.9999)"\
"& (BPVVDCHI2 > 12)"
self.setOptions(d02kpi)
d02kpiSel = Selection(d02kpiName + 'Sel',
Algorithm=d02kpi,
RequiredSelections=[trackfilterSel])
# Make the D*
dstar2d0piName = self.__sel_name__
dstar2d0pi = CombineParticles(dstar2d0piName)
dstar2d0pi.DecayDescriptor = "[ D*(2010)+ -> D0 pi+ ]cc"
dstar2d0pi.CombinationCut = "(ADAMASS('D*(2010)+') < 100*MeV)"
dstar2d0pi.MotherCut = "(ADMASS('D*(2010)+') < 50.0*MeV)"\
"& (PT > 2.2*GeV)"\
"& (VFASPF(VCHI2/VDOF)< 15.0)"\
"& (M-MAXTREE('D0'==ABSID,M)<155.5)"
self.setOptions(dstar2d0pi)
dstar2d0piSel = Selection(
dstar2d0piName + 'Sel',
Algorithm=dstar2d0pi,
RequiredSelections=[d02kpiSel, pionfilterSel])
# Selection Sequence
selSeq = SelectionSequence(self.__sel_name__ + 'Seq',
TopSelection=dstar2d0piSel)
# Run the selection sequence.
seq.Members += [selSeq.sequence()]
# Particle Monitoring plots
if self.getProp("RunMonitors"):
from Configurables import ParticleMonitor
plotter = ParticleMonitor(self.__sel_name__ + "Plots")
if self.getProp("RunSelection"):
plotter.Inputs = ['Phys/' + self.__sel_name__ + 'Sel']
else:
plotter.Inputs = self.getProp("Candidates")
plotter.PeakCut = "(M-MAXTREE('D0'==ABSID,M)<147.43) "\
"& (M-MAXTREE('D0'==ABSID,M)>143.43) "\
"& (INTREE((ABSID=='D0') & (ADMASS('D0') < 15*MeV) ))"
plotter.SideBandCut = "(M-MAXTREE('D0'==ABSID,M)>147.43) "\
"& (M-MAXTREE('D0'==ABSID,M)<143.43) "\
"& (INTREE((ABSID=='D0') & (ADMASS('D0') > 15*MeV) ))"
plotter.PlotTools = self.getProp("PlotTools")
self.setOptions(plotter)
seq.Members += [plotter]
# Make a DST ?
if self.getProp("MakeSelDST"):
# Prescale
from Configurables import DeterministicPrescaler
scaler = DeterministicPrescaler(
self.__sel_name__ + 'PreScale',
AcceptFraction=self.getProp("DSTPreScaleFraction"))
seq.Members += [scaler]
# Write the DST
MyDSTWriter = SelDSTWriter(self.__sel_name__ + "DST",
SelectionSequences=[selSeq],
OutputPrefix=self.__sel_name__)
seq.Members += [MyDSTWriter.sequence()]
# MC Performance checking ?
if self.getProp("MCChecks"):
from Configurables import ParticleEffPurMoni
mcPerf = ParticleEffPurMoni(dstar2d0piName + "MCPerf")
mcPerf.Inputs = ["Phys/" + dstar2d0piName]
self.setOptions(mcPerf)
seq.Members += [mcPerf]
# Ntuple ?
if self.getProp("MakeNTuple"): pass