s = C.convertArray2Tetra(s); s = T.join(s); s = P.exteriorFaces(s)
t = C.newPyTree(['Base']); t[2][1][2] = [a]
# Blanking
bodies = [[s]]
BM = N.array([[1]],N.int32)
t = X.blankCells(t,bodies,BM,blankingType='center_in')
t = X.setHoleInterpolatedPoints(t,depth=-2)
# Dist2Walls
t = DTW.distance2Walls(t,[s],type='ortho',loc='centers',signed=1)
t = C.center2Node(t,'centers:TurbulentDistance')
# Gradient de distance localise en centres => normales
t = P.computeGrad(t, 'TurbulentDistance')
t = I.initConst(t,MInf=0.2,loc='centers')
tc = C.node2Center(t)
t = X.setIBCData(t, tc, loc='centers', storage='direct')
no = 1
for bcType in xrange(4):
for varType in xrange(1,4):
t2 = X.setInterpTransfers(t,tc,bcType=bcType,varType=varType)
test.testT(t2,no)
no+=1
# Stockage inverse
Internal._rmNodesByName(t,"IBCD_*")
tc = X.setIBCData(t, tc, loc='centers', storage='inverse')
for bcType in xrange(4):
for varType in xrange(1,4):
X._setInterpTransfers(t,tc,bcType=bcType,varType=varType)
test.testT(tc,no)
no += 1
def _eikonal(t, tc=None, loc='nodes', nitmax=10, err=0.01):
MB = 1
try:
import Connector.PyTree as X
except:
MB = 0
if tc is None or MB == 0:
for z in Internal.getNodesFromType2(t, 'Zone_t'):
_eikonalForZone(z, loc)
return None
# Eikonal
nzones = len(Internal.getNodesFromType2(t, "Zone_t"))
isConverged = [0] * nzones
it = 0
nocv = 0 # nb de zones convergees
# calcul de la taille de maille sur le niveau le plus fin
dhmin = PHIMAX
for z in Internal.getNodesFromType2(t, "Zone_t"):
dhmin = min(
dhmin,
C.getValue(z, 'CoordinateX', 1) - C.getValue(z, 'CoordinateX', 0))
while nocv < nzones and it < nitmax + 1:
print 'Iteration %d' % it
# Eikonal sur les zones non convergees et sources
if loc == 'nodes': C._initVars(t, 'PhiM={Phi}')
else: C._initVars(t, 'centers:PhiM={centers:Phi}')
no = 0
for z in Internal.getNodesFromType2(t, "Zone_t"):
if isConverged[no] < 1 and C.getMaxValue(z, loc + ':flag') > 0.:
if loc == 'nodes':
C._initVars(
z, 'Phi=({flag}<0.1)*%f+({flag}>0.)*{Phi}' % PHIMAX)
else:
C._initVars(
z,
'centers:Phi=({centers:flag}<0.1)*%f+({centers:flag}>0.)*{Phi}'
% PHIMAX)
_eikonalForZone(z, loc=loc)
isConverged[no] = -1
no += 1
# Synchro
print 'Synchronization/transfers'
if tc is not None:
no = 0
for z in Internal.getNodesFromType2(t, "Zone_t"):
if isConverged[no] == -1: # a ete eikonalise: transferts
z2 = Internal.getNodeFromName(tc, z[0])
C._cpVars(z, loc + ':Phi', z2, 'Phi')
C._initVars(z2, 'flag', 1.)
# PAS THREADE ?????
X._setInterpTransfers(t,
z2,
variables=['Phi', 'flag'],
variablesIBC=None)
no += 1
# Convergence
if it > 0:
no = 0
nocv = 0
for z in Internal.getNodesFromType2(t, "Zone_t"):
if loc == 'nodes':
C._initVars(
z, 'DPhi=abs({Phi}-{PhiM})/(maximum(1.e-12,{Phi}))')
else:
C._initVars(
z,
'centers:DPhi=abs({centers:Phi}-{centers:PhiM})/(maximum(1.e-12,{centers:Phi}))'
)
valmax = C.getMaxValue(z, loc + ':DPhi')
dhloc = C.getValue(z, 'CoordinateX', 1) - C.getValue(
z, 'CoordinateX', 0)
errloc = err * dhloc / dhmin # on augmente la tolerance au fur et a mesure qu on diminue la resolution
if valmax < errloc and isConverged[no] == -1:
isConverged[no] = 1
nocv += 1
elif isConverged[no] == 1:
nocv += 1
no += 1
# Iteration
it += 1
#-----------------------------------------------------------------------------
if it < nitmax + 1:
print 'Distance by Eikonal converged after %d subiterations.' % it
else:
print 'Warning: distance by Eikonal did not converged after %d subiterations.' % nitmax
noi = 0
for i in isConverged:
if i != 1: print i, noi
noi += 1
return None
t = C.newPyTree(['Corps1', 'Corps2'])
t[2][1][2].append(a)
t[2][2][2].append(b)
t = X.connectMatch(t, dim=3)
C._fillEmptyBCWith(t, 'nref', 'BCFarfield', dim=3)
C._addState(t, 'EquationDimension', 3)
C._addVars(t, 'F')
C._initVars(t, 'centers:G', 1.)
t = X.applyBCOverlaps(t, depth=1)
tDnr = C.node2ExtCenter(t)
t1 = X.setInterpData(t, tDnr, sameName=1, loc='centers', storage='direct')
C._initVars(tDnr, '{F}={CoordinateX}*{CoordinateY}')
C._initVars(t1, '{centers:F}={centers:CoordinateX}*{centers:CoordinateY}')
X._setInterpTransfers(t1, tDnr, cellNVariable='', variables=['F'])
test.testT(t1, 0)
t1 = X.getOversetInfo(t1, tDnr, loc='centers', type='interpolated')
t1 = X.getOversetInfo(t1, tDnr, loc='centers', type='extrapolated')
t1 = X.getOversetInfo(t1, tDnr, loc='centers', type='orphan')
t1 = X.getOversetInfo(t1, tDnr, loc='centers', type='cellRatio')
t1 = X.getOversetInfo(t1, tDnr, loc='centers', type='donorAspect')
test.testT(t1, 1)
import sys
sys.exit()
tDnr = X.setInterpData(t, tDnr, sameName=1, loc='centers', storage='inverse')
t1 = X.getOversetInfo(t, tDnr, loc='centers', type='interpolated')
t1 = X.getOversetInfo(t1, tDnr, loc='centers', type='extrapolated')
t1 = X.getOversetInfo(t1, tDnr, loc='centers', type='orphan')
t1 = X.getOversetInfo(t1, tDnr, loc='centers', type='cellRatio')
def transferCellN__(t, tc, DEPTH, loc):
if tc is None: return t
try:
import Connector.PyTree as X
except:
raise ImportError(
"Dist2Walls: Eikonal version requires Connector module.")
# POINTS EXTERIEURS
# Marquage des pts de front entre du 0 et du 1
t = X.setHoleInterpolatedPoints(t, depth=DEPTH, loc=loc)
# transfert du cellN aux raccords
if tc is not None:
C._cpVars(t, loc + ':cellN', tc, 'cellN')
for zc in Internal.getNodesFromType2(tc, "Zone_t"):
if C.getMaxValue(zc, 'cellN') == 2.:
X._setInterpTransfers(t, zc, variables=["cellN"])
if loc == 'nodes':
C._initVars(t, "cellN=({cellN}>1.5)*2.+({cellN}>0.)*({cellN}<1.5)")
C._initVars(t, 'cellN = 1-{cellN}+({cellN}>1.5)*3')
else:
C._initVars(
t,
"centers:cellN=({centers:cellN}>1.5)*2.+({centers:cellN}>0.)*({centers:cellN}<1.5)"
)
C._initVars(
t, 'centers:cellN = 1-{centers:cellN}+({centers:cellN}>1.5)*3')
t = X.setHoleInterpolatedPoints(t, depth=DEPTH, loc=loc)
if loc == 'nodes':
C._initVars(t, 'cellN = 1-{cellN}+({cellN}>1.5)*3')
C._initVars(t, 'cellN2={cellN}')
else:
C._initVars(
t, 'centers:cellN = 1-{centers:cellN}+({centers:cellN}>1.5)*3')
C._initVars(t, 'centers:cellN2={centers:cellN}')
# POINTS INTERIEURS
if loc == 'nodes': C._initVars(t, 'cellN=minimum(1.,{cellN})')
else: C._initVars(t, 'centers:cellN=minimum(1.,{centers:cellN})')
t = X.setHoleInterpolatedPoints(t, depth=-DEPTH, loc=loc)
# transfert du cellN aux raccords
if tc is not None:
C._cpVars(t, loc + ':cellN', tc, 'cellN')
for zc in Internal.getNodesFromType2(tc, "Zone_t"):
if C.getMaxValue(zc, 'cellN') == 2.:
X._setInterpTransfers(t, zc, variables=["cellN"])
if loc == 'nodes':
C._initVars(t, "cellN=({cellN}>1.5)*2.+({cellN}>0.)*({cellN}<1.5)")
C._initVars(t, 'cellN = 1-{cellN}+({cellN}>1.5)*3')
else:
C._initVars(
t,
"centers:cellN=({centers:cellN}>1.5)*2.+({centers:cellN}>0.)*({centers:cellN}<1.5)"
)
C._initVars(
t, 'centers:cellN = 1-{centers:cellN}+({centers:cellN}>1.5)*3')
t = X.setHoleInterpolatedPoints(t, depth=-DEPTH, loc=loc)
if loc == 'nodes':
C._initVars(t, 'cellN = 1-{cellN}+({cellN}>1.5)*3')
C._initVars(t, 'cellN=maximum({cellN},{cellN2})')
C._rmVars(t, ['cellN2'])
else:
C._initVars(
t, 'centers:cellN = 1-{centers:cellN}+({centers:cellN}>1.5)*3')
C._initVars(t,
'centers:cellN=maximum({centers:cellN},{centers:cellN2})')
C._rmVars(t, ['centers:cellN2'])
return t