def getSliceCommand(filename):
if profile.getPreference('slicer').startswith('Slic3r') and getSlic3rExe() != False:
slic3rExe = getSlic3rExe()
if slic3rExe == False:
return False
cmd = [slic3rExe,
'--output-filename-format', '[input_filename_base].gcode',
'--nozzle-diameter', str(profile.calculateEdgeWidth()),
'--print-center', '%s,%s' % (profile.getPreferenceFloat('machine_width') / 2, profile.getPreferenceFloat('machine_depth') / 2),
'--z-offset', '0',
'--gcode-flavor', 'reprap',
'--gcode-comments',
'--filament-diameter', profile.getProfileSetting('filament_diameter'),
'--extrusion-multiplier', str(1.0 / float(profile.getProfileSetting('filament_density'))),
'--temperature', profile.getProfileSetting('print_temperature'),
'--travel-speed', profile.getProfileSetting('travel_speed'),
'--perimeter-speed', profile.getProfileSetting('print_speed'),
'--small-perimeter-speed', profile.getProfileSetting('print_speed'),
'--infill-speed', profile.getProfileSetting('print_speed'),
'--solid-infill-speed', profile.getProfileSetting('print_speed'),
'--bridge-speed', profile.getProfileSetting('print_speed'),
'--bottom-layer-speed-ratio', str(float(profile.getProfileSetting('bottom_layer_speed')) / float(profile.getProfileSetting('print_speed'))),
'--layer-height', profile.getProfileSetting('layer_height'),
'--first-layer-height-ratio', '1.0',
'--infill-every-layers', '1',
'--perimeters', str(profile.calculateLineCount()),
'--solid-layers', str(profile.calculateSolidLayerCount()),
'--fill-density', str(float(profile.getProfileSetting('fill_density'))/100),
'--fill-angle', '45',
'--fill-pattern', 'rectilinear', #rectilinear line concentric hilbertcurve archimedeanchords octagramspiral
'--solid-fill-pattern', 'rectilinear',
'--start-gcode', profile.getAlterationFilePath('start.gcode'),
'--end-gcode', profile.getAlterationFilePath('end.gcode'),
'--retract-length', profile.getProfileSetting('retraction_amount'),
'--retract-speed', str(int(float(profile.getProfileSetting('retraction_speed')))),
'--retract-restart-extra', profile.getProfileSetting('retraction_extra'),
'--retract-before-travel', profile.getProfileSetting('retraction_min_travel'),
'--retract-lift', '0',
'--slowdown-below-layer-time', profile.getProfileSetting('cool_min_layer_time'),
'--min-print-speed', profile.getProfileSetting('cool_min_feedrate'),
'--skirts', profile.getProfileSetting('skirt_line_count'),
'--skirt-distance', str(int(float(profile.getProfileSetting('skirt_gap')))),
'--skirt-height', '1',
'--scale', profile.getProfileSetting('model_scale'),
'--rotate', profile.getProfileSetting('model_rotate_base'),
'--duplicate-x', profile.getProfileSetting('model_multiply_x'),
'--duplicate-y', profile.getProfileSetting('model_multiply_y'),
'--duplicate-distance', '10']
if profile.getProfileSetting('support') != 'None':
cmd.extend(['--support-material'])
cmd.extend([filename])
return cmd
else:
pypyExe = getPyPyExe()
if pypyExe == False:
pypyExe = sys.executable
#In case we have a frozen exe, then argv[0] points to the executable, but we want to give pypy a real script file.
if hasattr(sys, 'frozen'):
mainScriptFile = os.path.abspath(os.path.join(os.path.dirname(os.path.abspath(__file__)), "../..", "cura_sf.zip"))
else:
mainScriptFile = os.path.abspath(os.path.join(os.path.dirname(os.path.abspath(__file__)), "..", os.path.split(sys.argv[0])[1]))
cmd = [pypyExe, mainScriptFile, '-p', profile.getGlobalProfileString(), '-s']
if platform.system() == "Windows":
try:
cmd.append(str(filename))
except UnicodeEncodeError:
cmd.append("#UTF8#" + filename.encode("utf-8"))
else:
cmd.append(filename)
return cmd
def calculateShellsBase(setting):
edgeWidth = profile.calculateEdgeWidth()
extraWall = profile.getProfileSettingFloat('extra_base_wall_thickness')
return profile.calculateLineCount() - 1 + int(extraWall / edgeWidth + 0.0001)
def _engineSettings(self, extruderCount):
settings = {
'layerThickness':
int(profile.getProfileSettingFloat('layer_height') * 1000),
'initialLayerThickness':
int(profile.getProfileSettingFloat('bottom_thickness') * 1000) if
profile.getProfileSettingFloat('bottom_thickness') > 0.0 else int(
profile.getProfileSettingFloat('layer_height') * 1000),
'filamentDiameter':
int(profile.getProfileSettingFloat('filament_diameter') * 1000),
'filamentFlow':
int(profile.getProfileSettingFloat('filament_flow')),
'extrusionWidth':
int(profile.calculateEdgeWidth() * 1000),
'insetCount':
int(profile.calculateLineCount()),
'downSkinCount':
int(profile.calculateSolidLayerCount())
if profile.getProfileSetting('solid_bottom') == 'True' else 0,
'upSkinCount':
int(profile.calculateSolidLayerCount())
if profile.getProfileSetting('solid_top') == 'True' else 0,
'infillOverlap':
int(profile.getProfileSettingFloat('fill_overlap')),
'initialSpeedupLayers':
int(4),
'initialLayerSpeed':
int(profile.getProfileSettingFloat('bottom_layer_speed')),
'printSpeed':
int(profile.getProfileSettingFloat('print_speed')),
'infillSpeed':
int(profile.getProfileSettingFloat('infill_speed')) if
int(profile.getProfileSettingFloat('infill_speed')) > 0 else int(
profile.getProfileSettingFloat('print_speed')),
'inset0Speed':
int(profile.getProfileSettingFloat('inset0_speed')) if
int(profile.getProfileSettingFloat('inset0_speed')) > 0 else int(
profile.getProfileSettingFloat('print_speed')),
'insetXSpeed':
int(profile.getProfileSettingFloat('insetx_speed')) if
int(profile.getProfileSettingFloat('insetx_speed')) > 0 else int(
profile.getProfileSettingFloat('print_speed')),
'moveSpeed':
int(profile.getProfileSettingFloat('travel_speed')),
'fanSpeedMin':
int(profile.getProfileSettingFloat('fan_speed'))
if profile.getProfileSetting('fan_enabled') == 'True' else 0,
'fanSpeedMax':
int(profile.getProfileSettingFloat('fan_speed_max'))
if profile.getProfileSetting('fan_enabled') == 'True' else 0,
'supportAngle':
int(-1) if profile.getProfileSetting('support') == 'None' else int(
profile.getProfileSettingFloat('support_angle')),
'supportEverywhere':
int(1) if profile.getProfileSetting('support') == 'Everywhere' else
int(0),
'supportLineDistance':
int(100 * profile.calculateEdgeWidth() * 1000 /
profile.getProfileSettingFloat('support_fill_rate'))
if profile.getProfileSettingFloat('support_fill_rate') > 0 else -1,
'supportXYDistance':
int(1000 * profile.getProfileSettingFloat('support_xy_distance')),
'supportZDistance':
int(1000 * profile.getProfileSettingFloat('support_z_distance')),
'supportExtruder':
0 if profile.getProfileSetting('support_dual_extrusion')
== 'First extruder' else
(1 if profile.getProfileSetting('support_dual_extrusion') ==
'Second extruder' and profile.minimalExtruderCount() > 1 else -1),
'retractionAmount':
int(profile.getProfileSettingFloat('retraction_amount') * 1000)
if profile.getProfileSetting('retraction_enable') == 'True' else 0,
'retractionSpeed':
int(profile.getProfileSettingFloat('retraction_speed')),
'retractionMinimalDistance':
int(
profile.getProfileSettingFloat('retraction_min_travel') *
1000),
'retractionAmountExtruderSwitch':
int(
profile.getProfileSettingFloat('retraction_dual_amount') *
1000),
'retractionZHop':
int(profile.getProfileSettingFloat('retraction_hop') * 1000),
'minimalExtrusionBeforeRetraction':
int(
profile.getProfileSettingFloat('retraction_minimal_extrusion')
* 1000),
'enableCombing':
1 if profile.getProfileSetting('retraction_combing') == 'True' else
0,
'multiVolumeOverlap':
int(profile.getProfileSettingFloat('overlap_dual') * 1000),
'objectSink':
max(0, int(profile.getProfileSettingFloat('object_sink') * 1000)),
'minimalLayerTime':
int(profile.getProfileSettingFloat('cool_min_layer_time')),
'minimalFeedrate':
int(profile.getProfileSettingFloat('cool_min_feedrate')),
'coolHeadLift':
1 if profile.getProfileSetting('cool_head_lift') == 'True' else 0,
'startCode':
profile.getAlterationFileContents('start.gcode', extruderCount),
'endCode':
profile.getAlterationFileContents('end.gcode', extruderCount),
'relativeE':
1 if profile.getMachineSetting('relative_extrusion') == 'True' else
0,
'perimInset':
int(profile.getProfileSettingFloat('perimeter_inset') * 1000),
'extruderOffset[1].X':
int(profile.getMachineSettingFloat('extruder_offset_x1') * 1000),
'extruderOffset[1].Y':
int(profile.getMachineSettingFloat('extruder_offset_y1') * 1000),
'extruderOffset[2].X':
int(profile.getMachineSettingFloat('extruder_offset_x2') * 1000),
'extruderOffset[2].Y':
int(profile.getMachineSettingFloat('extruder_offset_y2') * 1000),
'extruderOffset[3].X':
int(profile.getMachineSettingFloat('extruder_offset_x3') * 1000),
'extruderOffset[3].Y':
int(profile.getMachineSettingFloat('extruder_offset_y3') * 1000),
'fixHorrible':
0,
}
fanFullHeight = int(
profile.getProfileSettingFloat('fan_full_height') * 1000)
settings['fanFullOnLayerNr'] = (fanFullHeight -
settings['initialLayerThickness'] -
1) / settings['layerThickness'] + 1
if settings['fanFullOnLayerNr'] < 0:
settings['fanFullOnLayerNr'] = 0
if profile.getProfileSetting('support_type') == 'Lines':
settings['supportType'] = 1
if profile.getProfileSettingFloat('fill_density') == 0:
settings['sparseInfillLineDistance'] = -1
elif profile.getProfileSettingFloat('fill_density') == 100:
settings['sparseInfillLineDistance'] = settings['extrusionWidth']
#Set the up/down skins height to 10000 if we want a 100% filled object.
# This gives better results then normal 100% infill as the sparse and up/down skin have some overlap.
settings['downSkinCount'] = 10000
settings['upSkinCount'] = 10000
else:
settings['sparseInfillLineDistance'] = int(
100 * profile.calculateEdgeWidth() * 1000 /
profile.getProfileSettingFloat('fill_density'))
if profile.getProfileSetting('platform_adhesion') == 'Brim':
settings['skirtDistance'] = 0
settings['skirtLineCount'] = int(
profile.getProfileSettingFloat('brim_line_count'))
elif profile.getProfileSetting('platform_adhesion') == 'Raft':
settings['skirtDistance'] = 0
settings['skirtLineCount'] = 0
settings['raftMargin'] = int(
profile.getProfileSettingFloat('raft_margin') * 1000)
settings['raftLineSpacing'] = int(
profile.getProfileSettingFloat('raft_line_spacing') * 1000)
settings['raftBaseThickness'] = int(
profile.getProfileSettingFloat('raft_base_thickness') * 1000)
settings['raftBaseLinewidth'] = int(
profile.getProfileSettingFloat('raft_base_linewidth') * 1000)
settings['raftInterfaceThickness'] = int(
profile.getProfileSettingFloat('raft_interface_thickness') *
1000)
settings['raftInterfaceLinewidth'] = int(
profile.getProfileSettingFloat('raft_interface_linewidth') *
1000)
else:
settings['skirtDistance'] = int(
profile.getProfileSettingFloat('skirt_gap') * 1000)
settings['skirtLineCount'] = int(
profile.getProfileSettingFloat('skirt_line_count'))
settings['skirtMinLength'] = int(
profile.getProfileSettingFloat('skirt_minimal_length') * 1000)
if profile.getProfileSetting(
'fix_horrible_union_all_type_a') == 'True':
settings['fixHorrible'] |= 0x01
if profile.getProfileSetting(
'fix_horrible_union_all_type_b') == 'True':
settings['fixHorrible'] |= 0x02
if profile.getProfileSetting('fix_horrible_use_open_bits') == 'True':
settings['fixHorrible'] |= 0x10
if profile.getProfileSetting(
'fix_horrible_extensive_stitching') == 'True':
settings['fixHorrible'] |= 0x04
if settings['layerThickness'] <= 0:
settings['layerThickness'] = 1000
if profile.getMachineSetting('gcode_flavor') == 'UltiGCode':
settings['gcodeFlavor'] = 1
elif profile.getMachineSetting('gcode_flavor') == 'MakerBot':
settings['gcodeFlavor'] = 2
if profile.getProfileSetting('spiralize') == 'True':
settings['spiralizeMode'] = 1
if profile.getProfileSetting(
'wipe_tower') == 'True' and extruderCount > 1:
settings['wipeTowerSize'] = int(
math.sqrt(
profile.getProfileSettingFloat('wipe_tower_volume') *
1000 * 1000 * 1000 / settings['layerThickness']))
if profile.getProfileSetting('ooze_shield') == 'True':
settings['enableOozeShield'] = 1
return settings
def _engineSettings(self, extruderCount):
settings = {
'layerThickness': int(profile.getProfileSettingFloat('layer_height') * 1000),
'initialLayerThickness': int(profile.getProfileSettingFloat('bottom_thickness') * 1000) if profile.getProfileSettingFloat('bottom_thickness') > 0.0 else int(profile.getProfileSettingFloat('layer_height') * 1000),
'filamentDiameter': int(profile.getProfileSettingFloat('filament_diameter') * 1000),
'filamentFlow': int(profile.getProfileSettingFloat('filament_flow')),
'extrusionWidth': int(profile.calculateEdgeWidth() * 1000),
'insetCount': int(profile.calculateLineCount()),
'downSkinCount': int(profile.calculateSolidLayerCount()) if profile.getProfileSetting('solid_bottom') == 'True' else 0,
'upSkinCount': int(profile.calculateSolidLayerCount()) if profile.getProfileSetting('solid_top') == 'True' else 0,
'infillOverlap': int(profile.getProfileSettingFloat('fill_overlap')),
'initialSpeedupLayers': int(4),
'initialLayerSpeed': int(profile.getProfileSettingFloat('bottom_layer_speed')),
'printSpeed': int(profile.getProfileSettingFloat('print_speed')),
'infillSpeed': int(profile.getProfileSettingFloat('infill_speed')) if int(profile.getProfileSettingFloat('infill_speed')) > 0 else int(profile.getProfileSettingFloat('print_speed')),
'moveSpeed': int(profile.getProfileSettingFloat('travel_speed')),
'fanSpeedMin': int(profile.getProfileSettingFloat('fan_speed')) if profile.getProfileSetting('fan_enabled') == 'True' else 0,
'fanSpeedMax': int(profile.getProfileSettingFloat('fan_speed_max')) if profile.getProfileSetting('fan_enabled') == 'True' else 0,
'supportAngle': int(-1) if profile.getProfileSetting('support') == 'None' else int(60),
'supportEverywhere': int(1) if profile.getProfileSetting('support') == 'Everywhere' else int(0),
'supportLineDistance': int(100 * profile.calculateEdgeWidth() * 1000 / profile.getProfileSettingFloat('support_fill_rate')) if profile.getProfileSettingFloat('support_fill_rate') > 0 else -1,
'supportXYDistance': int(1000 * profile.getProfileSettingFloat('support_xy_distance')),
'supportZDistance': int(1000 * profile.getProfileSettingFloat('support_z_distance')),
'supportExtruder': 0 if profile.getProfileSetting('support_dual_extrusion') == 'First extruder' else (1 if profile.getProfileSetting('support_dual_extrusion') == 'Second extruder' else -1),
'retractionAmount': int(profile.getProfileSettingFloat('retraction_amount') * 1000) if profile.getProfileSetting('retraction_enable') == 'True' else 0,
'retractionSpeed': int(profile.getProfileSettingFloat('retraction_speed')),
'retractionMinimalDistance': int(profile.getProfileSettingFloat('retraction_min_travel') * 1000),
'retractionAmountExtruderSwitch': int(profile.getProfileSettingFloat('retraction_dual_amount') * 1000),
'minimalExtrusionBeforeRetraction': int(profile.getProfileSettingFloat('retraction_minimal_extrusion') * 1000),
'enableCombing': 1 if profile.getProfileSetting('retraction_combing') == 'True' else 0,
'multiVolumeOverlap': int(profile.getProfileSettingFloat('overlap_dual') * 1000),
'objectSink': int(profile.getProfileSettingFloat('object_sink') * 1000),
'minimalLayerTime': int(profile.getProfileSettingFloat('cool_min_layer_time')),
'minimalFeedrate': int(profile.getProfileSettingFloat('cool_min_feedrate')),
'coolHeadLift': 1 if profile.getProfileSetting('cool_head_lift') == 'True' else 0,
'startCode': profile.getAlterationFileContents('start.gcode', extruderCount),
'endCode': profile.getAlterationFileContents('end.gcode', extruderCount),
'extruderOffset[1].X': int(profile.getMachineSettingFloat('extruder_offset_x1') * 1000),
'extruderOffset[1].Y': int(profile.getMachineSettingFloat('extruder_offset_y1') * 1000),
'extruderOffset[2].X': int(profile.getMachineSettingFloat('extruder_offset_x2') * 1000),
'extruderOffset[2].Y': int(profile.getMachineSettingFloat('extruder_offset_y2') * 1000),
'extruderOffset[3].X': int(profile.getMachineSettingFloat('extruder_offset_x3') * 1000),
'extruderOffset[3].Y': int(profile.getMachineSettingFloat('extruder_offset_y3') * 1000),
'fixHorrible': 0,
}
fanFullHeight = int(profile.getProfileSettingFloat('fan_full_height') * 1000)
settings['fanFullOnLayerNr'] = (fanFullHeight - settings['initialLayerThickness'] - 1) / settings['layerThickness'] + 1
if settings['fanFullOnLayerNr'] < 0:
settings['fanFullOnLayerNr'] = 0
if profile.getProfileSettingFloat('fill_density') == 0:
settings['sparseInfillLineDistance'] = -1
elif profile.getProfileSettingFloat('fill_density') == 100:
settings['sparseInfillLineDistance'] = settings['extrusionWidth']
#Set the up/down skins height to 10000 if we want a 100% filled object.
# This gives better results then normal 100% infill as the sparse and up/down skin have some overlap.
settings['downSkinCount'] = 10000
settings['upSkinCount'] = 10000
else:
settings['sparseInfillLineDistance'] = int(100 * profile.calculateEdgeWidth() * 1000 / profile.getProfileSettingFloat('fill_density'))
if profile.getProfileSetting('platform_adhesion') == 'Brim':
settings['skirtDistance'] = 0
settings['skirtLineCount'] = int(profile.getProfileSettingFloat('brim_line_count'))
elif profile.getProfileSetting('platform_adhesion') == 'Raft':
settings['skirtDistance'] = 0
settings['skirtLineCount'] = 0
settings['raftMargin'] = int(profile.getProfileSettingFloat('raft_margin') * 1000)
settings['raftLineSpacing'] = int(profile.getProfileSettingFloat('raft_line_spacing') * 1000)
settings['raftBaseThickness'] = int(profile.getProfileSettingFloat('raft_base_thickness') * 1000)
settings['raftBaseLinewidth'] = int(profile.getProfileSettingFloat('raft_base_linewidth') * 1000)
settings['raftInterfaceThickness'] = int(profile.getProfileSettingFloat('raft_interface_thickness') * 1000)
settings['raftInterfaceLinewidth'] = int(profile.getProfileSettingFloat('raft_interface_linewidth') * 1000)
else:
settings['skirtDistance'] = int(profile.getProfileSettingFloat('skirt_gap') * 1000)
settings['skirtLineCount'] = int(profile.getProfileSettingFloat('skirt_line_count'))
settings['skirtMinLength'] = int(profile.getProfileSettingFloat('skirt_minimal_length') * 1000)
if profile.getProfileSetting('fix_horrible_union_all_type_a') == 'True':
settings['fixHorrible'] |= 0x01
if profile.getProfileSetting('fix_horrible_union_all_type_b') == 'True':
settings['fixHorrible'] |= 0x02
if profile.getProfileSetting('fix_horrible_use_open_bits') == 'True':
settings['fixHorrible'] |= 0x10
if profile.getProfileSetting('fix_horrible_extensive_stitching') == 'True':
settings['fixHorrible'] |= 0x04
if settings['layerThickness'] <= 0:
settings['layerThickness'] = 1000
if profile.getMachineSetting('gcode_flavor') == 'UltiGCode':
settings['gcodeFlavor'] = 1
if profile.getProfileSetting('spiralize') == 'True':
settings['spiralizeMode'] = 1
if profile.getProfileSetting('wipe_tower') == 'True':
settings['enableWipeTower'] = 1
if profile.getProfileSetting('ooze_shield') == 'True':
settings['enableOozeShield'] = 1
return settings
def calculateShells(setting): return profile.calculateLineCount() - 1
def _engineSettings(self, extruderCount):
settings = {
'layerThickness':
int(profile.getProfileSettingFloat('layer_height') * 1000),
'initialLayerThickness':
int(profile.getProfileSettingFloat('bottom_thickness') * 1000) if
profile.getProfileSettingFloat('bottom_thickness') > 0.0 else int(
profile.getProfileSettingFloat('layer_height') * 1000),
'filamentDiameter':
int(profile.getProfileSettingFloat('filament_diameter') * 1000),
'filamentFlow':
int(profile.getProfileSettingFloat('filament_flow')),
'extrusionWidth':
int(profile.calculateEdgeWidth() * 1000),
'insetCount':
int(profile.calculateLineCount()),
'downSkinCount':
int(profile.calculateSolidLayerCount())
if profile.getProfileSetting('solid_bottom') == 'True' else 0,
'upSkinCount':
int(profile.calculateSolidLayerCount())
if profile.getProfileSetting('solid_top') == 'True' else 0,
'sparseInfillLineDistance':
int(100 * profile.calculateEdgeWidth() * 1000 /
profile.getProfileSettingFloat('fill_density'))
if profile.getProfileSettingFloat('fill_density') > 0 else -1,
'infillOverlap':
int(profile.getProfileSettingFloat('fill_overlap')),
'initialSpeedupLayers':
int(4),
'initialLayerSpeed':
int(profile.getProfileSettingFloat('bottom_layer_speed')),
'printSpeed':
int(profile.getProfileSettingFloat('print_speed')),
'infillSpeed':
int(profile.getProfileSettingFloat('infill_speed')) if
int(profile.getProfileSettingFloat('infill_speed')) > 0 else int(
profile.getProfileSettingFloat('print_speed')),
'moveSpeed':
int(profile.getProfileSettingFloat('travel_speed')),
'fanOnLayerNr':
int(profile.getProfileSettingFloat('fan_layer')),
'fanSpeedMin':
int(profile.getProfileSettingFloat('fan_speed'))
if profile.getProfileSetting('fan_enabled') == 'True' else 0,
'fanSpeedMax':
int(profile.getProfileSettingFloat('fan_speed_max'))
if profile.getProfileSetting('fan_enabled') == 'True' else 0,
'supportAngle':
int(-1)
if profile.getProfileSetting('support') == 'None' else int(60),
'supportEverywhere':
int(1) if profile.getProfileSetting('support') == 'Everywhere' else
int(0),
'supportLineWidth':
int(
profile.getProfileSettingFloat('support_rate') *
profile.calculateEdgeWidth() * 1000 / 100),
'retractionAmount':
int(profile.getProfileSettingFloat('retraction_amount') * 1000)
if profile.getProfileSetting('retraction_enable') == 'True' else 0,
'retractionSpeed':
int(profile.getProfileSettingFloat('retraction_speed')),
'retractionAmountExtruderSwitch':
int(
profile.getProfileSettingFloat('retraction_dual_amount') *
1000),
'multiVolumeOverlap':
int(profile.getProfileSettingFloat('overlap_dual') * 1000),
'objectSink':
int(profile.getProfileSettingFloat('object_sink') * 1000),
'minimalLayerTime':
int(profile.getProfileSettingFloat('cool_min_layer_time')),
'minimalFeedrate':
int(profile.getProfileSettingFloat('cool_min_feedrate')),
'coolHeadLift':
1 if profile.getProfileSetting('cool_head_lift') == 'True' else 0,
'startCode':
profile.getAlterationFileContents('start.gcode', extruderCount),
'endCode':
profile.getAlterationFileContents('end.gcode', extruderCount),
'extruderOffset[1].X':
int(profile.getPreferenceFloat('extruder_offset_x1') * 1000),
'extruderOffset[1].Y':
int(profile.getPreferenceFloat('extruder_offset_y1') * 1000),
'extruderOffset[2].X':
int(profile.getPreferenceFloat('extruder_offset_x2') * 1000),
'extruderOffset[2].Y':
int(profile.getPreferenceFloat('extruder_offset_y2') * 1000),
'extruderOffset[3].X':
int(profile.getPreferenceFloat('extruder_offset_x3') * 1000),
'extruderOffset[3].Y':
int(profile.getPreferenceFloat('extruder_offset_y3') * 1000),
'fixHorrible':
0,
}
if profile.getProfileSetting('platform_adhesion') == 'Brim':
settings['skirtDistance'] = 0
settings['skirtLineCount'] = int(
profile.getProfileSettingFloat('brim_line_count'))
elif profile.getProfileSetting('platform_adhesion') == 'Raft':
settings['skirtDistance'] = 0
settings['skirtLineCount'] = 0
settings['raftMargin'] = int(
profile.getProfileSettingFloat('raft_margin') * 1000)
settings['raftBaseThickness'] = int(
profile.getProfileSettingFloat('raft_base_thickness') * 1000)
settings['raftBaseLinewidth'] = int(
profile.getProfileSettingFloat('raft_base_linewidth') * 1000)
settings['raftInterfaceThickness'] = int(
profile.getProfileSettingFloat('raft_interface_thickness') *
1000)
settings['raftInterfaceLinewidth'] = int(
profile.getProfileSettingFloat('raft_interface_linewidth') *
1000)
else:
settings['skirtDistance'] = int(
profile.getProfileSettingFloat('skirt_gap') * 1000)
settings['skirtLineCount'] = int(
profile.getProfileSettingFloat('skirt_line_count'))
if profile.getProfileSetting(
'fix_horrible_union_all_type_a') == 'True':
settings['fixHorrible'] |= 0x01
if profile.getProfileSetting(
'fix_horrible_union_all_type_b') == 'True':
settings['fixHorrible'] |= 0x02
if profile.getProfileSetting('fix_horrible_use_open_bits') == 'True':
settings['fixHorrible'] |= 0x10
if profile.getProfileSetting(
'fix_horrible_extensive_stitching') == 'True':
settings['fixHorrible'] |= 0x04
if settings['layerThickness'] <= 0:
settings['layerThickness'] = 1000
return settings
def _engineSettings(self, extruderCount): #not used!
settings = {
'layerThickness': int(profile.getProfileSettingFloat('layer_height') * 1000),
'initialLayerThickness': int(profile.getProfileSettingFloat('bottom_thickness') * 1000) if profile.getProfileSettingFloat('bottom_thickness') > 0.0 else int(profile.getProfileSettingFloat('layer_height') * 1000),
'filamentDiameter': int(profile.getProfileSettingFloat('filament_diameter') * 1000),
'filamentFlow': int(profile.getProfileSettingFloat('filament_flow')),
'extrusionWidth': int(profile.calculateEdgeWidth() * 1000),
'insetCount': int(profile.calculateLineCount()),
'downSkinCount': int(profile.calculateSolidLayerCount()) if profile.getProfileSetting('solid_bottom') == 'True' else 0,
'upSkinCount': int(profile.calculateSolidLayerCount()) if profile.getProfileSetting('solid_top') == 'True' else 0,
'sparseInfillLineDistance': int(100 * profile.calculateEdgeWidth() * 1000 / profile.getProfileSettingFloat('fill_density')) if profile.getProfileSettingFloat('fill_density') > 0 else -1,
'infillOverlap': int(profile.getProfileSettingFloat('fill_overlap')),
'initialSpeedupLayers': int(4),
'initialLayerSpeed': int(profile.getProfileSettingFloat('bottom_layer_speed')),
'printSpeed': int(profile.getProfileSettingFloat('print_speed')),
'infillSpeed': int(profile.getProfileSettingFloat('infill_speed')) if int(profile.getProfileSettingFloat('infill_speed')) > 0 else int(profile.getProfileSettingFloat('print_speed')),
'moveSpeed': int(profile.getProfileSettingFloat('travel_speed')),
'fanOnLayerNr': int(profile.getProfileSettingFloat('fan_layer')),
'fanSpeedMin': int(profile.getProfileSettingFloat('fan_speed')) if profile.getProfileSetting('fan_enabled') == 'True' else 0,
'fanSpeedMax': int(profile.getProfileSettingFloat('fan_speed_max')) if profile.getProfileSetting('fan_enabled') == 'True' else 0,
'supportAngle': int(-1) if profile.getProfileSetting('support') == 'None' else int(60),
'supportEverywhere': int(1) if profile.getProfileSetting('support') == 'Everywhere' else int(0),
'supportLineWidth': int(profile.getProfileSettingFloat('support_rate') * profile.calculateEdgeWidth() * 1000 / 100),
'retractionAmount': int(profile.getProfileSettingFloat('retraction_amount') * 1000) if profile.getProfileSetting('retraction_enable') == 'True' else 0,
'retractionSpeed': int(profile.getProfileSettingFloat('retraction_speed')),
'retractionAmountExtruderSwitch': int(profile.getProfileSettingFloat('retraction_dual_amount') * 1000),
'multiVolumeOverlap': int(profile.getProfileSettingFloat('overlap_dual') * 1000),
'objectSink': int(profile.getProfileSettingFloat('object_sink') * 1000),
'minimalLayerTime': int(profile.getProfileSettingFloat('cool_min_layer_time')),
'minimalFeedrate': int(profile.getProfileSettingFloat('cool_min_feedrate')),
'coolHeadLift': 1 if profile.getProfileSetting('cool_head_lift') == 'True' else 0,
'startCode': profile.getAlterationFileContents('start.gcode', extruderCount),
'endCode': profile.getAlterationFileContents('end.gcode', extruderCount),
'extruderOffset[1].X': int(profile.getPreferenceFloat('extruder_offset_x1') * 1000),
'extruderOffset[1].Y': int(profile.getPreferenceFloat('extruder_offset_y1') * 1000),
'extruderOffset[2].X': int(profile.getPreferenceFloat('extruder_offset_x2') * 1000),
'extruderOffset[2].Y': int(profile.getPreferenceFloat('extruder_offset_y2') * 1000),
'extruderOffset[3].X': int(profile.getPreferenceFloat('extruder_offset_x3') * 1000),
'extruderOffset[3].Y': int(profile.getPreferenceFloat('extruder_offset_y3') * 1000),
'fixHorrible': 0,
}
if profile.getProfileSetting('platform_adhesion') == 'Brim':
settings['skirtDistance'] = 0
settings['skirtLineCount'] = int(profile.getProfileSettingFloat('brim_line_count'))
elif profile.getProfileSetting('platform_adhesion') == 'Raft':
settings['skirtDistance'] = 0
settings['skirtLineCount'] = 0
settings['raftMargin'] = int(profile.getProfileSettingFloat('raft_margin') * 1000)
settings['raftBaseThickness'] = int(profile.getProfileSettingFloat('raft_base_thickness') * 1000)
settings['raftBaseLinewidth'] = int(profile.getProfileSettingFloat('raft_base_linewidth') * 1000)
settings['raftInterfaceThickness'] = int(profile.getProfileSettingFloat('raft_interface_thickness') * 1000)
settings['raftInterfaceLinewidth'] = int(profile.getProfileSettingFloat('raft_interface_linewidth') * 1000)
else:
settings['skirtDistance'] = int(profile.getProfileSettingFloat('skirt_gap') * 1000)
settings['skirtLineCount'] = int(profile.getProfileSettingFloat('skirt_line_count'))
if profile.getProfileSetting('fix_horrible_union_all_type_a') == 'True':
settings['fixHorrible'] |= 0x01
if profile.getProfileSetting('fix_horrible_union_all_type_b') == 'True':
settings['fixHorrible'] |= 0x02
if profile.getProfileSetting('fix_horrible_use_open_bits') == 'True':
settings['fixHorrible'] |= 0x10
if profile.getProfileSetting('fix_horrible_extensive_stitching') == 'True':
settings['fixHorrible'] |= 0x04
if settings['layerThickness'] <= 0:
settings['layerThickness'] = 1000
return settings
def _engineSettings(self, extruderCount):
settings = {
"layerThickness": int(profile.getProfileSettingFloat("layer_height") * 1000),
"initialLayerThickness": int(profile.getProfileSettingFloat("bottom_thickness") * 1000)
if profile.getProfileSettingFloat("bottom_thickness") > 0.0
else int(profile.getProfileSettingFloat("layer_height") * 1000),
"filamentDiameter": int(profile.getProfileSettingFloat("filament_diameter") * 1000),
"filamentFlow": int(profile.getProfileSettingFloat("filament_flow")),
"extrusionWidth": int(profile.calculateEdgeWidth() * 1000),
"insetCount": int(profile.calculateLineCount()),
"downSkinCount": int(profile.calculateSolidLayerCount())
if profile.getProfileSetting("solid_bottom") == "True"
else 0,
"upSkinCount": int(profile.calculateSolidLayerCount())
if profile.getProfileSetting("solid_top") == "True"
else 0,
"infillOverlap": int(profile.getProfileSettingFloat("fill_overlap")),
"initialSpeedupLayers": int(4),
"initialLayerSpeed": int(profile.getProfileSettingFloat("bottom_layer_speed")),
"printSpeed": int(profile.getProfileSettingFloat("print_speed")),
"infillSpeed": int(profile.getProfileSettingFloat("infill_speed"))
if int(profile.getProfileSettingFloat("infill_speed")) > 0
else int(profile.getProfileSettingFloat("print_speed")),
"moveSpeed": int(profile.getProfileSettingFloat("travel_speed")),
"fanSpeedMin": int(profile.getProfileSettingFloat("fan_speed"))
if profile.getProfileSetting("fan_enabled") == "True"
else 0,
"fanSpeedMax": int(profile.getProfileSettingFloat("fan_speed_max"))
if profile.getProfileSetting("fan_enabled") == "True"
else 0,
"supportAngle": int(-1) if profile.getProfileSetting("support") == "None" else int(60),
"supportEverywhere": int(1) if profile.getProfileSetting("support") == "Everywhere" else int(0),
"supportLineDistance": int(
100 * profile.calculateEdgeWidth() * 1000 / profile.getProfileSettingFloat("support_fill_rate")
)
if profile.getProfileSettingFloat("support_fill_rate") > 0
else -1,
"supportXYDistance": int(1000 * profile.getProfileSettingFloat("support_xy_distance")),
"supportZDistance": int(1000 * profile.getProfileSettingFloat("support_z_distance")),
"supportExtruder": 0
if profile.getProfileSetting("support_dual_extrusion") == "First extruder"
else (1 if profile.getProfileSetting("support_dual_extrusion") == "Second extruder" else -1),
"retractionAmount": int(profile.getProfileSettingFloat("retraction_amount") * 1000)
if profile.getProfileSetting("retraction_enable") == "True"
else 0,
"retractionSpeed": int(profile.getProfileSettingFloat("retraction_speed")),
"retractionMinimalDistance": int(profile.getProfileSettingFloat("retraction_min_travel") * 1000),
"retractionAmountExtruderSwitch": int(profile.getProfileSettingFloat("retraction_dual_amount") * 1000),
"minimalExtrusionBeforeRetraction": int(
profile.getProfileSettingFloat("retraction_minimal_extrusion") * 1000
),
"enableCombing": 1 if profile.getProfileSetting("retraction_combing") == "True" else 0,
"multiVolumeOverlap": int(profile.getProfileSettingFloat("overlap_dual") * 1000),
"objectSink": int(profile.getProfileSettingFloat("object_sink") * 1000),
"minimalLayerTime": int(profile.getProfileSettingFloat("cool_min_layer_time")),
"minimalFeedrate": int(profile.getProfileSettingFloat("cool_min_feedrate")),
"coolHeadLift": 1 if profile.getProfileSetting("cool_head_lift") == "True" else 0,
"startCode": profile.getAlterationFileContents("start.gcode", extruderCount),
"endCode": profile.getAlterationFileContents("end.gcode", extruderCount),
"extruderOffset[1].X": int(profile.getMachineSettingFloat("extruder_offset_x1") * 1000),
"extruderOffset[1].Y": int(profile.getMachineSettingFloat("extruder_offset_y1") * 1000),
"extruderOffset[2].X": int(profile.getMachineSettingFloat("extruder_offset_x2") * 1000),
"extruderOffset[2].Y": int(profile.getMachineSettingFloat("extruder_offset_y2") * 1000),
"extruderOffset[3].X": int(profile.getMachineSettingFloat("extruder_offset_x3") * 1000),
"extruderOffset[3].Y": int(profile.getMachineSettingFloat("extruder_offset_y3") * 1000),
"fixHorrible": 0,
}
fanFullHeight = int(profile.getProfileSettingFloat("fan_full_height") * 1000)
settings["fanFullOnLayerNr"] = (fanFullHeight - settings["initialLayerThickness"]) / settings[
"layerThickness"
] + 1
if settings["fanFullOnLayerNr"] < 0:
settings["fanFullOnLayerNr"] = 0
if profile.getProfileSettingFloat("fill_density") == 0:
settings["sparseInfillLineDistance"] = -1
elif profile.getProfileSettingFloat("fill_density") == 100:
settings["sparseInfillLineDistance"] = settings["extrusionWidth"]
# Set the up/down skins height to 10000 if we want a 100% filled object.
# This gives better results then normal 100% infill as the sparse and up/down skin have some overlap.
settings["downSkinCount"] = 10000
settings["upSkinCount"] = 10000
else:
settings["sparseInfillLineDistance"] = int(
100 * profile.calculateEdgeWidth() * 1000 / profile.getProfileSettingFloat("fill_density")
)
if profile.getProfileSetting("platform_adhesion") == "Brim":
settings["skirtDistance"] = 0
settings["skirtLineCount"] = int(profile.getProfileSettingFloat("brim_line_count"))
elif profile.getProfileSetting("platform_adhesion") == "Raft":
settings["skirtDistance"] = 0
settings["skirtLineCount"] = 0
settings["raftMargin"] = int(profile.getProfileSettingFloat("raft_margin") * 1000)
settings["raftLineSpacing"] = int(profile.getProfileSettingFloat("raft_line_spacing") * 1000)
settings["raftBaseThickness"] = int(profile.getProfileSettingFloat("raft_base_thickness") * 1000)
settings["raftBaseLinewidth"] = int(profile.getProfileSettingFloat("raft_base_linewidth") * 1000)
settings["raftInterfaceThickness"] = int(profile.getProfileSettingFloat("raft_interface_thickness") * 1000)
settings["raftInterfaceLinewidth"] = int(profile.getProfileSettingFloat("raft_interface_linewidth") * 1000)
else:
settings["skirtDistance"] = int(profile.getProfileSettingFloat("skirt_gap") * 1000)
settings["skirtLineCount"] = int(profile.getProfileSettingFloat("skirt_line_count"))
settings["skirtMinLength"] = int(profile.getProfileSettingFloat("skirt_minimal_length") * 1000)
if profile.getProfileSetting("fix_horrible_union_all_type_a") == "True":
settings["fixHorrible"] |= 0x01
if profile.getProfileSetting("fix_horrible_union_all_type_b") == "True":
settings["fixHorrible"] |= 0x02
if profile.getProfileSetting("fix_horrible_use_open_bits") == "True":
settings["fixHorrible"] |= 0x10
if profile.getProfileSetting("fix_horrible_extensive_stitching") == "True":
settings["fixHorrible"] |= 0x04
if settings["layerThickness"] <= 0:
settings["layerThickness"] = 1000
if profile.getMachineSetting("gcode_flavor") == "UltiGCode":
settings["gcodeFlavor"] = 1
return settings
def calculateShellsBase(setting):
edgeWidth = profile.calculateEdgeWidth()
extraWall = profile.getProfileSettingFloat('extra_base_wall_thickness')
return profile.calculateLineCount() - 1 + int(extraWall / edgeWidth +
0.0001)
def calculateShells(setting):
return profile.calculateLineCount() - 1