def numericInput(self,numx,numy,numz):
"this function gets called by the toolbar when a valid base point has been entered"
self.point = Vector(numx,numy,numz)
self.node.append(self.point)
if not self.pickmode:
self.ui.offUi()
if self.call:
self.view.removeEventCallback("SoEvent",self.call)
self.task = DraftGui.ScaleTaskPanel()
self.task.sourceCmd = self
DraftGui.todo.delay(FreeCADGui.Control.showDialog,self.task)
if self.ghost:
self.ghost.on()
elif len(self.node) == 2:
msg(translate("draft", "Pick new distance from base point:")+"\n")
elif len(self.node) == 3:
if hasattr(FreeCADGui,"Snapper"):
FreeCADGui.Snapper.off()
if self.call:
self.view.removeEventCallback("SoEvent",self.call)
d1 = (self.node[1].sub(self.node[0])).Length
d2 = (self.node[2].sub(self.node[0])).Length
#print d2,"/",d1,"=",d2/d1
if hasattr(self,"task"):
if self.task:
self.task.lock.setChecked(True)
self.task.setValue(d2/d1)
def Activated(self):
self.name = translate("draft","Scale", utf8_decode=True)
Modifier.Activated(self,self.name)
self.ghost = None
if self.ui:
if not FreeCADGui.Selection.getSelection():
self.ui.selectUi()
msg(translate("draft", "Select an object to scale")+"\n")
self.call = self.view.addEventCallback("SoEvent",selectObject)
else:
self.proceed()
def Activated(self):
self.name = translate("draft", "BaseTransform", utf8_decode=True)
Modifier.Activated(self, self.name)
if self.ui:
if not FreeCADGui.Selection.getSelection():
self.ui.selectUi()
msg(translate("draft", "Select an object to edit") + "\n")
self.call_sel = \
self.view.addEventCallback("SoEvent", selectObject)
## TODO it should allow multiple selections
## TODO Ui should be more explanatory
else:
self.proceed()
def proceed(self):
if self.call: self.view.removeEventCallback("SoEvent",self.call)
self.sel = FreeCADGui.Selection.getSelection()
self.sel = Draft.getGroupContents(self.sel)
self.refs = []
self.ui.pointUi(self.name)
self.ui.modUi()
self.ui.xValue.setFocus()
self.ui.xValue.selectAll()
self.ghost = ghostTracker(self.sel)
self.pickmode = False
self.task = None
self.call = self.view.addEventCallback("SoEvent",self.action)
msg(translate("draft", "Pick base point:")+"\n")
def numericInput(self,numx,numy,numz):
"this function gets called by the toolbar when valid x, y, and z \
have been entered there"
self.center = Vector(numx,numy,numz)
self.node = [self.center]
self.arctrack.setCenter(self.center)
if self.ghost:
for typ in self.ghost:
if typ == 'toEdit' or typ == 'dirDeps':
for g in [i for i in self.ghost[typ]]:
g.center(self.center)
self.ui.radiusUi()
self.ui.hasFill.hide()
self.ui.labelRadius.setText("Base angle")
self.step = 1
msg(translate("draft", "Pick base angle:")+"\n")
def numericRadius(self,rad):
"this function gets called by the toolbar when valid radius have been entered there"
if (self.step == 1):
self.ui.labelRadius.setText("Rotation")
self.firstangle = math.radians(rad)
self.arctrack.setStartAngle(self.firstangle)
self.arctrack.on()
if self.ghost:
for typ in self.ghost:
if typ == 'toEdit' or typ == 'dirDeps':
for g in [i for i in self.ghost[typ]]:
g.on()
self.step = 2
msg(translate("draft", "Pick rotation angle:")+"\n")
else:
self.rot(math.radians(rad),self.ui.isCopy.isChecked())
self.finish(cont=True)
def action(self,arg):
"scene event handler"
if arg["Type"] == "SoKeyboardEvent":
if arg["Key"] == "ESCAPE":
self.finish()
elif arg["Type"] == "SoLocation2Event": #mouse movement detection
#if self.ghost:
# self.ghost.off()
self.point,ctrlPoint,info = getPoint(self,arg)
if (len(self.node) > 0):
last = self.node[len(self.node)-1]
delta = self.point.sub(last)
if self.ghost:
for typ in self.ghost:
if typ == 'toEdit' or typ == 'dirDeps':
for g in [i for i in self.ghost[typ]]:
g.move(delta)
g.on()
if self.extendedCopy:
if not hasMod(arg,MODALT): self.finish()
redraw3DView()
elif arg["Type"] == "SoMouseButtonEvent":
if (arg["State"] == "DOWN") and (arg["Button"] == "BUTTON1"):
if self.point:
self.ui.redraw()
if (self.node == []):
self.node.append(self.point)
self.ui.isRelative.show()
if self.ghost:
for typ in self.ghost:
if typ == 'toEdit' or typ == 'dirDeps':
for g in [i for i in self.ghost[typ]]:
g.on()
msg(translate("draft", "Pick end point:")+"\n")
if self.planetrack:
self.planetrack.set(self.point)
else:
last = self.node[0]
if self.ui.isCopy.isChecked() or hasMod(arg,MODALT):
self.move(self.point.sub(last),True)
else:
self.move(self.point.sub(last))
if hasMod(arg,MODALT):
self.extendedCopy = True
else:
self.finish(cont=True)
def numericInput(self,numx,numy,numz):
"this function gets called by the toolbar when valid x, y, and z \
have been entered there"
self.point = Vector(numx,numy,numz)
if not self.node:
self.node.append(self.point)
self.ui.isRelative.show()
self.ui.isCopy.show()
for typ in self.ghost:
if typ == 'toEdit' or typ == 'dirDeps':
for g in [i for i in self.ghost[typ]]:
g.on()
msg(translate("draft", "Pick end point:")+"\n")
else:
last = self.node[-1]
if self.ui.isCopy.isChecked():
self.move(self.point.sub(last),True)
else:
self.move(self.point.sub(last))
self.finish()
def Activated(self):
from bimEdit import hideAttribute
self.name = translate("draft","bimMove", utf8_decode=True)
Modifier.Activated(self,self.name)
self.ghost = {}
for typ in self.sel_dict:
if typ not in self.ghost:
self.ghost.update({typ:[]})
for o in self.sel_dict[typ]:
self.ghost[typ].append(o.ghost[typ])
## Proceeding
if self.call:
self.view.removeEventCallback("SoEvent",self.call)
self.ui.pointUi(self.name)
self.ui.modUi()
if self.copymode:
self.ui.isCopy.setChecked(True)
self.ui.xValue.setFocus()
self.ui.xValue.selectAll()
self.call = self.view.addEventCallback("SoEvent",self.action)
msg(translate("draft", "Pick start point:")+"\n")
def Activated(self):
from bimEdit import hideAttribute
self.name = translate("draft","bimRotate", utf8_decode=True)
Modifier.Activated(self,self.name)
self.ghost = {}
for typ in self.sel_dict:
if typ not in self.ghost:
self.ghost.update({typ:[]})
for o in self.sel_dict[typ]:
self.ghost[typ].append(o.ghost[typ])
self.arctrack = None
## Proceeding
if self.call:
self.view.removeEventCallback("SoEvent",self.call)
self.step = 0
self.center = None
self.ui.arcUi()
self.ui.modUi()
self.ui.setTitle("Rotate")
self.arctrack = arcTracker()
self.call = self.view.addEventCallback("SoEvent",self.action)
msg(translate("draft", "Pick rotation center:")+"\n")
def pickRef(self):
self.pickmode = True
if self.node:
self.node = self.node[:1] # remove previous picks
msg(translate("draft", "Pick reference distance from base point:")+"\n")
self.call = self.view.addEventCallback("SoEvent",self.action)
def action(self,arg):
"scene event handler"
if arg["Type"] == "SoKeyboardEvent":
if arg["Key"] == "ESCAPE":
self.finish()
elif arg["Type"] == "SoLocation2Event":
#if self.ghost:
# self.ghost.off()
self.point,ctrlPoint,info = getPoint(self,arg)
# this is to make sure radius is what you see on screen
if self.center and DraftVecUtils.dist(self.point,self.center):
viewdelta = DraftVecUtils.project(self.point.sub(self.center),
plane.axis)
if not DraftVecUtils.isNull(viewdelta):
self.point = self.point.add(viewdelta.negative())
if self.extendedCopy:
if not hasMod(arg,MODALT):
self.step = 3
self.finish()
if (self.step == 0):
pass
elif (self.step == 1):
currentrad = DraftVecUtils.dist(self.point,self.center)
if (currentrad != 0):
angle = DraftVecUtils.angle(plane.u,
self.point.sub(self.center), plane.axis)
else: angle = 0
self.ui.setRadiusValue(math.degrees(angle),unit="Angle")
self.firstangle = angle
self.ui.radiusValue.setFocus()
self.ui.radiusValue.selectAll()
elif (self.step == 2):
currentrad = DraftVecUtils.dist(self.point,self.center)
if (currentrad != 0):
angle = DraftVecUtils.angle(plane.u,
self.point.sub(self.center), plane.axis)
else: angle = 0
if (angle < self.firstangle):
sweep = (2*math.pi-self.firstangle)+angle
else:
sweep = angle - self.firstangle
self.arctrack.setApertureAngle(sweep)
if self.ghost:
for typ in self.ghost:
if typ == 'toEdit' or typ == 'dirDeps':
for g in [i for i in self.ghost[typ]]:
g.rotate(plane.axis,sweep)
g.on()
self.ui.setRadiusValue(math.degrees(sweep), 'Angle')
self.ui.radiusValue.setFocus()
self.ui.radiusValue.selectAll()
redraw3DView()
elif arg["Type"] == "SoMouseButtonEvent":
if (arg["State"] == "DOWN") and (arg["Button"] == "BUTTON1"):
if self.point:
if (self.step == 0):
self.center = self.point
self.node = [self.point]
self.ui.radiusUi()
self.ui.radiusValue.setText(FreeCAD.Units.Quantity(
0,FreeCAD.Units.Angle).UserString)
self.ui.hasFill.hide()
self.ui.labelRadius.setText("Base angle")
self.arctrack.setCenter(self.center)
if self.ghost:
for typ in self.ghost:
if typ == 'toEdit' or typ == 'dirDeps':
for g in [i for i in self.ghost[typ]]:
g.center(self.center)
self.step = 1
msg(translate("draft", "Pick base angle:")+"\n")
if self.planetrack:
self.planetrack.set(self.point)
elif (self.step == 1):
self.ui.labelRadius.setText("Rotation")
self.rad = DraftVecUtils.dist(self.point,self.center)
self.arctrack.on()
self.arctrack.setStartPoint(self.point)
if self.ghost:
for typ in self.ghost:
if typ == 'toEdit' or typ == 'dirDeps':
for g in [i for i in self.ghost[typ]]:
g.on()
self.step = 2
msg(translate("draft", "Pick rotation angle:")+"\n")
else:
currentrad = DraftVecUtils.dist(self.point,self.center)
angle = self.point.sub(self.center).getAngle(plane.u)
if DraftVecUtils.project(self.point.sub(self.center),
plane.v).getAngle(plane.v) > 1:
angle = -angle
if (angle < self.firstangle):
sweep = (2*math.pi-self.firstangle)+angle
else:
sweep = angle - self.firstangle
if self.ui.isCopy.isChecked() or hasMod(arg,MODALT):
self.rot(sweep,True)
else:
self.rot(sweep)
if hasMod(arg,MODALT):
self.extendedCopy = True
else:
self.finish(cont=True)
