def exterior_facet_boundary_node_map(self, method):
'''The :class:`pyop2.Map` from exterior facets to the nodes on
those facets. Note that this differs from
:meth:`exterior_facet_node_map` in that only surface nodes
are referenced, not all nodes in cells touching the surface.
:arg method: The method for determining boundary nodes. See
:class:`~.bcs.DirichletBC`.
'''
el = self.fiat_element
dim = self._mesh.facet_dimension()
if method == "topological":
boundary_dofs = el.entity_closure_dofs()[dim]
elif method == "geometric":
if self.extruded:
# This function is only called on extruded meshes when
# asking for the nodes that live on the "vertical"
# exterior facets. Hence we don't need to worry about
# horiz_facet_support_dofs as well.
boundary_dofs = vert_facet_support_dofs(el)
else:
boundary_dofs = facet_support_dofs(el)
nodes_per_facet = \
len(boundary_dofs[0])
# HACK ALERT
# The facet set does not have a halo associated with it, since
# we only construct halos for DoF sets. Fortunately, this
# loop is direct and we already have all the correct
# information available locally. So We fake a set of the
# correct size and carry out a direct loop
facet_set = op2.Set(self._mesh.exterior_facets.set.total_size)
fs_dat = op2.Dat(facet_set**el.space_dimension(),
data=self.exterior_facet_node_map().values_with_halo)
facet_dat = op2.Dat(facet_set**nodes_per_facet,
dtype=np.int32)
local_facet_nodes = np.array(
[dofs for e, dofs in boundary_dofs.iteritems()])
# Helper function to turn the inner index of an array into c
# array literals.
c_array = lambda xs: "{"+", ".join(map(str, xs))+"}"
body = ast.Block([ast.Decl("int",
ast.Symbol("l_nodes", (len(el.get_reference_element().topology[dim]),
nodes_per_facet)),
init=ast.ArrayInit(c_array(map(c_array, local_facet_nodes))),
qualifiers=["const"]),
ast.For(ast.Decl("int", "n", 0),
ast.Less("n", nodes_per_facet),
ast.Incr("n", 1),
ast.Assign(ast.Symbol("facet_nodes", ("n",)),
ast.Symbol("cell_nodes", ("l_nodes[facet[0]][n]",))))
])
kernel = op2.Kernel(ast.FunDecl("void", "create_bc_node_map",
[ast.Decl("int*", "cell_nodes"),
ast.Decl("int*", "facet_nodes"),
ast.Decl("unsigned int*", "facet")],
body),
"create_bc_node_map")
local_facet_dat = op2.Dat(facet_set ** self._mesh.exterior_facets._rank,
self._mesh.exterior_facets.local_facet_dat.data_ro_with_halos,
dtype=np.uintc)
op2.par_loop(kernel, facet_set,
fs_dat(op2.READ),
facet_dat(op2.WRITE),
local_facet_dat(op2.READ))
if isinstance(self._mesh, mesh_t.ExtrudedMesh):
offset = self.offset[boundary_dofs[0]]
else:
offset = None
return op2.Map(facet_set, self.node_set,
nodes_per_facet,
facet_dat.data_ro_with_halos,
name="exterior_facet_boundary_node",
offset=offset)
def exterior_facet_boundary_node_map(self, V, method):
"""Return the :class:`pyop2.Map` from exterior facets to nodes
on the boundary.
:arg V: The function space.
:arg method: The method for determining boundary nodes. See
:class:`~.DirichletBC` for details.
"""
try:
return self.map_caches["boundary_node"][method]
except KeyError:
pass
el = V.fiat_element
dim = self.mesh.facet_dimension()
if method == "topological":
boundary_dofs = el.entity_closure_dofs()[dim]
elif method == "geometric":
if self.extruded:
# This function is only called on extruded meshes when
# asking for the nodes that live on the "vertical"
# exterior facets. Hence we don't need to worry about
# horiz_facet_support_dofs as well.
boundary_dofs = vert_facet_support_dofs(el)
else:
boundary_dofs = facet_support_dofs(el)
nodes_per_facet = \
len(boundary_dofs[0])
# HACK ALERT
# The facet set does not have a halo associated with it, since
# we only construct halos for DoF sets. Fortunately, this
# loop is direct and we already have all the correct
# information available locally. So We fake a set of the
# correct size and carry out a direct loop
facet_set = op2.Set(self.mesh.exterior_facets.set.total_size)
fs_dat = op2.Dat(facet_set**el.space_dimension(),
data=V.exterior_facet_node_map().values_with_halo)
facet_dat = op2.Dat(facet_set**nodes_per_facet, dtype=numpy.int32)
# Ensure these come out in sorted order.
local_facet_nodes = numpy.array(
[boundary_dofs[e] for e in sorted(boundary_dofs.keys())])
# Helper function to turn the inner index of an array into c
# array literals.
c_array = lambda xs: "{" + ", ".join(map(str, xs)) + "}"
# AST for: l_nodes[facet[0]][n]
rank_ast = ast.Symbol("l_nodes",
rank=(ast.Symbol("facet", rank=(0, )), "n"))
body = ast.Block([
ast.Decl("int",
ast.Symbol("l_nodes",
(len(el.get_reference_element().topology[dim]),
nodes_per_facet)),
init=ast.ArrayInit(
c_array(map(c_array, local_facet_nodes))),
qualifiers=["const"]),
ast.For(
ast.Decl("int", "n", 0), ast.Less("n", nodes_per_facet),
ast.Incr("n", 1),
ast.Assign(ast.Symbol("facet_nodes", ("n", )),
ast.Symbol("cell_nodes", (rank_ast, ))))
])
kernel = op2.Kernel(
ast.FunDecl("void", "create_bc_node_map", [
ast.Decl("int*", "cell_nodes"),
ast.Decl("int*", "facet_nodes"),
ast.Decl("unsigned int*", "facet")
], body), "create_bc_node_map")
local_facet_dat = op2.Dat(
facet_set**self.mesh.exterior_facets._rank,
self.mesh.exterior_facets.local_facet_dat.data_ro_with_halos,
dtype=numpy.uintc)
op2.par_loop(kernel, facet_set, fs_dat(op2.READ), facet_dat(op2.WRITE),
local_facet_dat(op2.READ))
if self.extruded:
offset = self.offset[boundary_dofs[0]]
else:
offset = None
val = op2.Map(facet_set,
self.node_set,
nodes_per_facet,
facet_dat.data_ro_with_halos,
name="exterior_facet_boundary_node",
offset=offset)
self.map_caches["boundary_node"][method] = val
return val
def exterior_facet_boundary_node_map(self, method):
'''The :class:`pyop2.Map` from exterior facets to the nodes on
those facets. Note that this differs from
:meth:`exterior_facet_node_map` in that only surface nodes
are referenced, not all nodes in cells touching the surface.
:arg method: The method for determining boundary nodes. See
:class:`~.bcs.DirichletBC`.
'''
el = self.fiat_element
dim = self._mesh.facet_dimension()
if method == "topological":
boundary_dofs = el.entity_closure_dofs()[dim]
elif method == "geometric":
if self.extruded:
# This function is only called on extruded meshes when
# asking for the nodes that live on the "vertical"
# exterior facets. Hence we don't need to worry about
# horiz_facet_support_dofs as well.
boundary_dofs = vert_facet_support_dofs(el)
else:
boundary_dofs = facet_support_dofs(el)
nodes_per_facet = \
len(boundary_dofs[0])
# HACK ALERT
# The facet set does not have a halo associated with it, since
# we only construct halos for DoF sets. Fortunately, this
# loop is direct and we already have all the correct
# information available locally. So We fake a set of the
# correct size and carry out a direct loop
facet_set = op2.Set(self._mesh.exterior_facets.set.total_size)
fs_dat = op2.Dat(facet_set**el.space_dimension(),
data=self.exterior_facet_node_map().values_with_halo)
facet_dat = op2.Dat(facet_set**nodes_per_facet, dtype=np.int32)
local_facet_nodes = np.array(
[dofs for e, dofs in boundary_dofs.iteritems()])
# Helper function to turn the inner index of an array into c
# array literals.
c_array = lambda xs: "{" + ", ".join(map(str, xs)) + "}"
body = ast.Block([
ast.Decl("int",
ast.Symbol("l_nodes",
(len(el.get_reference_element().topology[dim]),
nodes_per_facet)),
init=ast.ArrayInit(
c_array(map(c_array, local_facet_nodes))),
qualifiers=["const"]),
ast.For(
ast.Decl("int", "n", 0), ast.Less("n", nodes_per_facet),
ast.Incr("n", 1),
ast.Assign(
ast.Symbol("facet_nodes", ("n", )),
ast.Symbol("cell_nodes", ("l_nodes[facet[0]][n]", ))))
])
kernel = op2.Kernel(
ast.FunDecl("void", "create_bc_node_map", [
ast.Decl("int*", "cell_nodes"),
ast.Decl("int*", "facet_nodes"),
ast.Decl("unsigned int*", "facet")
], body), "create_bc_node_map")
local_facet_dat = op2.Dat(
facet_set**self._mesh.exterior_facets._rank,
self._mesh.exterior_facets.local_facet_dat.data_ro_with_halos,
dtype=np.uintc)
op2.par_loop(kernel, facet_set, fs_dat(op2.READ), facet_dat(op2.WRITE),
local_facet_dat(op2.READ))
if isinstance(self._mesh.topology, mesh_t.ExtrudedMeshTopology):
offset = self.offset[boundary_dofs[0]]
else:
offset = None
return op2.Map(facet_set,
self.node_set,
nodes_per_facet,
facet_dat.data_ro_with_halos,
name="exterior_facet_boundary_node",
offset=offset)
def exterior_facet_boundary_node_map(self, V, method):
"""Return the :class:`pyop2.Map` from exterior facets to nodes
on the boundary.
:arg V: The function space.
:arg method: The method for determining boundary nodes. See
:class:`~.DirichletBC` for details.
"""
try:
return self.map_caches["boundary_node"][method]
except KeyError:
pass
el = V.fiat_element
dim = self.mesh.facet_dimension()
if method == "topological":
boundary_dofs = el.entity_closure_dofs()[dim]
elif method == "geometric":
if self.extruded:
# This function is only called on extruded meshes when
# asking for the nodes that live on the "vertical"
# exterior facets. Hence we don't need to worry about
# horiz_facet_support_dofs as well.
boundary_dofs = vert_facet_support_dofs(el)
else:
boundary_dofs = facet_support_dofs(el)
nodes_per_facet = \
len(boundary_dofs[0])
# HACK ALERT
# The facet set does not have a halo associated with it, since
# we only construct halos for DoF sets. Fortunately, this
# loop is direct and we already have all the correct
# information available locally. So We fake a set of the
# correct size and carry out a direct loop
facet_set = op2.Set(self.mesh.exterior_facets.set.total_size)
fs_dat = op2.Dat(facet_set**el.space_dimension(),
data=V.exterior_facet_node_map().values_with_halo)
facet_dat = op2.Dat(facet_set**nodes_per_facet,
dtype=numpy.int32)
# Ensure these come out in sorted order.
local_facet_nodes = numpy.array(
[boundary_dofs[e] for e in sorted(boundary_dofs.keys())])
# Helper function to turn the inner index of an array into c
# array literals.
c_array = lambda xs: "{"+", ".join(map(str, xs))+"}"
# AST for: l_nodes[facet[0]][n]
rank_ast = ast.Symbol("l_nodes", rank=(ast.Symbol("facet", rank=(0,)), "n"))
body = ast.Block([ast.Decl("int",
ast.Symbol("l_nodes", (len(el.get_reference_element().topology[dim]),
nodes_per_facet)),
init=ast.ArrayInit(c_array(map(c_array, local_facet_nodes))),
qualifiers=["const"]),
ast.For(ast.Decl("int", "n", 0),
ast.Less("n", nodes_per_facet),
ast.Incr("n", 1),
ast.Assign(ast.Symbol("facet_nodes", ("n",)),
ast.Symbol("cell_nodes", (rank_ast, ))))
])
kernel = op2.Kernel(ast.FunDecl("void", "create_bc_node_map",
[ast.Decl("int*", "cell_nodes"),
ast.Decl("int*", "facet_nodes"),
ast.Decl("unsigned int*", "facet")],
body),
"create_bc_node_map")
local_facet_dat = op2.Dat(facet_set ** self.mesh.exterior_facets._rank,
self.mesh.exterior_facets.local_facet_dat.data_ro_with_halos,
dtype=numpy.uintc)
op2.par_loop(kernel, facet_set,
fs_dat(op2.READ),
facet_dat(op2.WRITE),
local_facet_dat(op2.READ))
if self.extruded:
offset = self.offset[boundary_dofs[0]]
else:
offset = None
val = op2.Map(facet_set, self.node_set,
nodes_per_facet,
facet_dat.data_ro_with_halos,
name="exterior_facet_boundary_node",
offset=offset)
self.map_caches["boundary_node"][method] = val
return val
