class DiffTASLab(DataViewer):
cam_initialize_done = QtCore.pyqtSignal(int)
spec_initialize = QtCore.pyqtSignal()
cam_initialize = QtCore.pyqtSignal()
def __init__(self):
super(DiffTASLab, self).__init__(parent=None)
self.cam_initialize_done.connect(self.init_UI)
self.init_andor_devices()
#self.init_UI()
def init_andor_devices(self):
"""Initialize all Andor devices (Cameras, Spectrograph).
Do not proceed before initialzition is finished."""
# self.spec_initialize.connect(self.cam.spec.initialize,
# type=QtCore.Qt.BlockingQueuedConnection)
# self.cam_initialize.connect(self.cam.initialize,
# type=QtCore.Qt.BlockingQueuedConnection)
for actcam in cams:
# print("Connecting cam: " + actcam.name + "\n")
# self.cam_initialize.connect(actcam.initialize,
# type=QtCore.Qt.DirectConnection)
# print("Connecting spec: " + actcam.name + "\n")
# self.spec_initialize.connect(actcam.spec.initialize,
# type=QtCore.Qt.DirectConnection)
# #print("Init cam: " + actcam.name + "\n")
# self.cam_initialize.emit()
# print("Init spec: " + actcam.name + "\n")
# self.spec_initialize.emit()
print("Init cam: " + actcam.name + "\n")
actcam.initialize()
print("Init spec: " + actcam.name + "\n")
actcam.spec.initialize()
print("Finished\n")
self.cam_initialize_done.emit(0)
def init_UI(self, cam_id):
cam = cams[cam_id]
#print(str(cam.x[0]) + str(cam.x[-1]) + "\n")
mode = "running"
#mode = "blockwise"
#self.resize(800, 800)
self.showMaximized()
#self.devices = {}
self.Devices = DataViewer(self, name="Devices")
self.addWidget("Devices",
self.Devices,
position="left",
minSize=(250, 800))
self.Measurement = DataViewer(self, name="Measurement")
self.addWidget("Measurement",
self.Measurement,
position="right",
relativeTo="Devices",
minSize=(500, 800))
self.controlCamera = self.Devices.addWidget("Camera Control",
CameraControlWidget(cam),
position="top",
minSize=(250, 250))
#self.controlCamera.cam_initialize_done.connect(start_the_rest)
self.controlAcquisition = self.Devices.addWidget(
"Acquisition Settings",
AcquisitionWidget(cam, acquiring=False),
position="bottom",
relativeTo="Camera Control",
minSize=(250, 250))
self.acquireCamera = DataAcquirerSpectral(
cam.x, self.controlAcquisition.new_data, mode)
self.controlDelaystage = self.Devices.addWidget(
"Delay stage",
DelayStageWidget(),
position="bottom",
relativeTo="Camera Control",
minSize=(250, 250))
# self.controlShutter1 = self.Devices.addWidget("Beamshutter",
# BeamshutterWidget(),
# position="bottom",
# relativeTo="Delay stage",
# minSize=(250,0))
# self.controlChopper1 = self.Devices.addWidget("Optical Chopper",
# ChopperControls(),
# position="bottom",
# relativeTo="Beamshutter",
# minSize=(250,0))
# self.controlShutter1.setEnabled(False)
# self.controlChopper1.setEnabled(False)
self.logfile = self.addWidget("Logfile",
QtGui.QListWidget(self),
position="bottom",
relativeTo="Devices")
self.plotterPOsig = self.Measurement.addWidget(
"Signal: Probe only",
PlotterWidgetSpectral1D(self.acquireCamera.new_data_processed,
"Signal: Probe only"),
position="top",
minSize=(250, 250))
self.plotterTAsig = self.Measurement.addWidget(
"Signal: Ratio",
PlotterWidgetSpectral1D(self.acquireCamera.new_data_processed,
"Signal: Ratio"),
position="below",
relativeTo="Signal: Probe only",
minSize=(250, 250))
self.plotterPOrms = self.Measurement.addWidget(
"RMS: Probe only",
PlotterWidgetSpectral1D(self.acquireCamera.new_data_processed,
"RMS: Probe only"),
position="bottom",
relativeTo="Signal: Ratio",
minSize=(250, 250))
# connect signals for plotters to start and stop displaying
self.controlAcquisition.startDisplay.connect(
self.plotterPOsig.startAcq)
self.controlAcquisition.abortDisplay.connect(
self.plotterPOsig.abortAcq)
self.controlAcquisition.startDisplay.connect(
self.plotterTAsig.startAcq)
self.controlAcquisition.abortDisplay.connect(
self.plotterTAsig.abortAcq)
self.controlAcquisition.startDisplay.connect(
self.plotterPOrms.startAcq)
self.controlAcquisition.abortDisplay.connect(
self.plotterPOrms.abortAcq)
self.joblist = self.Measurement.addWidget("Job List",
JobListWidget(self),
position="bottom",
relativeTo="RMS: Probe only",
minSize=(300, 550))
self.addLogfile()
# class LabControl(DataViewer):
# def __init__(self,parent=None):
# #os.chdir(os.path.dirname(sys.argv[0]))
# DataViewer.__init__(self,parent)
# self.parent=parent
# self.resize(800,800)
# self.setWindowTitle("Lab Control")
# #self.setWindowIcon(QtGui.QIcon('LabView.png'))
# self.Devices=DataViewer(self,name="Devices")
# self.Measurement=DataViewer(self,name="Measurement")
# self.addWidget("Devices",self.Devices)
# self.addWidget("Measurement",self.Measurement,position="above",relativeTo="Devices",minSize=(250,350))
# self.Measurement.addWidget("ValveControl",ValveControl(),position="right",minSize=(250,250))
# self.logfile=self.addWidget("Logfile",QtGui.QListWidget(self),position="bottom",relativeTo="Devices")
# self.controlDelaystage=self.Devices.addWidget("Delaystage",controlDelaystage.DelayStageWidget(),minSize=(250,250))
# self.thShutter=self.Devices.addWidget("Thorlabs Beamshutter",ThorlabsBeamshutter.BeamshutterWidget(),position="right",relativeTo="Delaystage",minSize=(250,250))
# self.piShutter=self.Devices.addWidget("Picard Beamshutter",PicardShutter.PiShutter(),position="bottom",relativeTo="Thorlabs Beamshutter",minSize=(200,150))
# self.rotationstage=self.Devices.addWidget("Rotation Stage",RotationStage.RotationStageWidget(),position="bottom",relativeTo="Delaystage",minSize=(200,150))
# self.keithley=self.Devices.addWidget("Keithley",Keithley.KeithleyWidget(),position="left",minSize=(250,250))
# #self.themis=self.Measurement.addWidget("Themis",ThemisApplication.ThemisApplication(self),position="right",minSize=(250,550))
# self.themis=ThemisApplication.ThemisApplication(self)
# self.joblist=self.Measurement.addWidget("Job List",Joblist.JobListWidget(self),position="left",relativeTo="ValveControl",minSize=(300,550))
# self.addLogfile()
def closeEvent(self, event):
quit_msg = "Are you sure you want to exit the program?"
reply = QtGui.QMessageBox.question(self, 'Message', quit_msg,
QtGui.QMessageBox.Yes,
QtGui.QMessageBox.No)
if reply == QtGui.QMessageBox.Yes:
event.accept()
self.controlCamera.close()
#if hasattr(self.themis,"measurementItem"): self.themis.measurementItem.viewer.close()
else:
event.ignore()
def _del(self):
pass
#self.controlShutter1._del()
#self.rotationstage._del()
def addLogfile(self):
self.controlDelaystage.delaystage.throwMessage.connect(
self.addToLogfile)
#self.thShutter.shut.throwMessage.connect(self.addToLogfile)
self.joblist.throwMessage.connect(self.addToLogfile)
#self.themis.throwMessage.connect(self.addToLogfile)
#self.piShutter.throwMessage.connect(self.addToLogfile)
#self.rotationstage.rotationStage.throwMessage.connect(self.addToLogfile)
def addToLogfile(self, msg, level=0):
message = ""
for i in range(level):
message = " " + message
message = message + msg
self.logfile.addItem(message)
self.logfile.scrollToBottom()
def excepthook(self, type, value, tb):
#traceback.print_tb(tb)
if QCoreApplication.instance() is None:
app = QtGui.QApplication(sys.argv)
if type is Exception:
message = value.args[0]
detailed = value.args[1]
else:
message = "".join(
traceback.format_exception_only(type, value) + [" " * 100])
detailed = "".join(traceback.format_tb(tb))
self.addToLogfile(message, 0)
self.addToLogfile(detailed, 2)
traceback.print_tb(tb)
print(message)
def init_UI(self, cam_id):
cam = cams[cam_id]
#print(str(cam.x[0]) + str(cam.x[-1]) + "\n")
mode = "running"
#mode = "blockwise"
#self.resize(800, 800)
self.showMaximized()
#self.devices = {}
self.Devices = DataViewer(self, name="Devices")
self.addWidget("Devices",
self.Devices,
position="left",
minSize=(250, 800))
self.Measurement = DataViewer(self, name="Measurement")
self.addWidget("Measurement",
self.Measurement,
position="right",
relativeTo="Devices",
minSize=(500, 800))
self.controlCamera = self.Devices.addWidget("Camera Control",
CameraControlWidget(cam),
position="top",
minSize=(250, 250))
#self.controlCamera.cam_initialize_done.connect(start_the_rest)
self.controlAcquisition = self.Devices.addWidget(
"Acquisition Settings",
AcquisitionWidget(cam, acquiring=False),
position="bottom",
relativeTo="Camera Control",
minSize=(250, 250))
self.acquireCamera = DataAcquirerSpectral(
cam.x, self.controlAcquisition.new_data, mode)
self.controlDelaystage = self.Devices.addWidget(
"Delay stage",
DelayStageWidget(),
position="bottom",
relativeTo="Camera Control",
minSize=(250, 250))
# self.controlShutter1 = self.Devices.addWidget("Beamshutter",
# BeamshutterWidget(),
# position="bottom",
# relativeTo="Delay stage",
# minSize=(250,0))
# self.controlChopper1 = self.Devices.addWidget("Optical Chopper",
# ChopperControls(),
# position="bottom",
# relativeTo="Beamshutter",
# minSize=(250,0))
# self.controlShutter1.setEnabled(False)
# self.controlChopper1.setEnabled(False)
self.logfile = self.addWidget("Logfile",
QtGui.QListWidget(self),
position="bottom",
relativeTo="Devices")
self.plotterPOsig = self.Measurement.addWidget(
"Signal: Probe only",
PlotterWidgetSpectral1D(self.acquireCamera.new_data_processed,
"Signal: Probe only"),
position="top",
minSize=(250, 250))
self.plotterTAsig = self.Measurement.addWidget(
"Signal: Ratio",
PlotterWidgetSpectral1D(self.acquireCamera.new_data_processed,
"Signal: Ratio"),
position="below",
relativeTo="Signal: Probe only",
minSize=(250, 250))
self.plotterPOrms = self.Measurement.addWidget(
"RMS: Probe only",
PlotterWidgetSpectral1D(self.acquireCamera.new_data_processed,
"RMS: Probe only"),
position="bottom",
relativeTo="Signal: Ratio",
minSize=(250, 250))
# connect signals for plotters to start and stop displaying
self.controlAcquisition.startDisplay.connect(
self.plotterPOsig.startAcq)
self.controlAcquisition.abortDisplay.connect(
self.plotterPOsig.abortAcq)
self.controlAcquisition.startDisplay.connect(
self.plotterTAsig.startAcq)
self.controlAcquisition.abortDisplay.connect(
self.plotterTAsig.abortAcq)
self.controlAcquisition.startDisplay.connect(
self.plotterPOrms.startAcq)
self.controlAcquisition.abortDisplay.connect(
self.plotterPOrms.abortAcq)
self.joblist = self.Measurement.addWidget("Job List",
JobListWidget(self),
position="bottom",
relativeTo="RMS: Probe only",
minSize=(300, 550))
self.addLogfile()
def init_UI(self, cam_id):
cam = cams[cam_id]
#self.resize(800, 800)
self.showMaximized()
#self.devices = {}
self.Devices = DataViewer(self, name="Devices")
self.addWidget("Devices",
self.Devices,
position="left",
minSize=(250, 800))
self.Measurement = DataViewer(self, name="Measurement")
self.addWidget("Measurement",
self.Measurement,
position="right",
relativeTo="Devices",
minSize=(500, 800))
self.cam_control = self.Devices.addWidget("Camera Control",
CameraControlWidget(cam),
position="top",
minSize=(250, 250))
#self.cam_control.cam_initialize_done.connect(start_the_rest)
self.acq_control = self.Devices.addWidget("Acquisition Settings",
AcquisitionWidget(
cam, acquiring=False),
position="bottom",
relativeTo="Camera Control",
minSize=(250, 250))
# self.camAcquirer = dataAcquirerSpectral(cam.x, self.acq_control.new_data,
# mode)
self.delaystage = self.Devices.addWidget("Delay stage",
DelayStageWidget(),
position="bottom",
relativeTo="Camera Control",
minSize=(250, 250))
self.shutter = self.Devices.addWidget("Beamshutter",
BeamshutterWidget(),
position="bottom",
relativeTo="Delay stage",
minSize=(250, 0))
self.chopper = self.Devices.addWidget("Optical Chopper",
ChopperControls(),
position="bottom",
relativeTo="Beamshutter",
minSize=(250, 0))
self.shutter.setEnabled(False)
self.chopper.setEnabled(False)
self.logfile = self.addWidget("Logfile",
QtGui.QListWidget(self),
position="bottom",
relativeTo="Devices")
self.plot_raw_sig = self.Measurement.addWidget(
"Camera Signal",
PlotterWidget(AvgPlotter, "Cam Sig", cam.x,
self.acq_control.new_probe_only),
position="top",
minSize=(250, 250))
# self.plot_raw_sig = self.Measurement.addWidget("Signal: Probe only",
# PlotterWidget(PlotterWidgetSpectral1D,
# self.camAcquirer.new_data_processed,
# "Signal: Probe only"),
# position="top",
# minSize=(250,250))
self.plot_tas_sig = self.Measurement.addWidget(
"TAS Signal",
PlotterWidget(RatioPlotter, "TAS Sig", cam.x,
self.acq_control.new_probe_only,
self.acq_control.new_pump_probe),
position="below",
relativeTo="Camera Signal",
minSize=(250, 250))
self.plot_rms_sig = self.Measurement.addWidget(
"RMS Signal",
PlotterWidget(RmsPlotter, "RMS Sig", cam.x,
self.acq_control.new_probe_only),
position="bottom",
relativeTo="Camera Signal",
minSize=(250, 250))
self.acq_control.startDisplay.connect(self.plot_raw_sig.startAcq)
self.acq_control.abortDisplay.connect(self.plot_raw_sig.abortAcq)
self.acq_control.startDisplay.connect(self.plot_tas_sig.startAcq)
self.acq_control.abortDisplay.connect(self.plot_tas_sig.abortAcq)
self.acq_control.startDisplay.connect(self.plot_rms_sig.startAcq)
self.acq_control.abortDisplay.connect(self.plot_rms_sig.abortAcq)
self.joblist = self.Measurement.addWidget("Job List",
JobListWidget(self),
position="bottom",
relativeTo="RMS Signal",
minSize=(300, 550))
# #self.chopper = self.Devices.addWidget("Optical Chopper", ChopperControls())
# #self.chopper.setEnabled(False)
self.addLogfile()
class DiffTASLab(DataViewer):
cam_initialize_done = QtCore.pyqtSignal(int)
spec_initialize = QtCore.pyqtSignal()
cam_initialize = QtCore.pyqtSignal()
def __init__(self):
super(DiffTASLab, self).__init__(parent=None)
self.cam_initialize_done.connect(self.init_UI)
self.init_andor_devices()
#self.init_UI()
def init_andor_devices(self):
"""Initialize all Andor devices (Cameras, Spectrograph).
Do not proceed before initialzition is finished."""
# self.spec_initialize.connect(self.cam.spec.initialize,
# type=QtCore.Qt.BlockingQueuedConnection)
# self.cam_initialize.connect(self.cam.initialize,
# type=QtCore.Qt.BlockingQueuedConnection)
for actcam in cams:
# print("Connecting cam: " + actcam.name + "\n")
# self.cam_initialize.connect(actcam.initialize,
# type=QtCore.Qt.DirectConnection)
# print("Connecting spec: " + actcam.name + "\n")
# self.spec_initialize.connect(actcam.spec.initialize,
# type=QtCore.Qt.DirectConnection)
# #print("Init cam: " + actcam.name + "\n")
# self.cam_initialize.emit()
# print("Init spec: " + actcam.name + "\n")
# self.spec_initialize.emit()
print("Init cam: " + actcam.name + "\n")
actcam.initialize()
print("Init spec: " + actcam.name + "\n")
actcam.spec.initialize()
print("Finished\n")
self.cam_initialize_done.emit(0)
def init_UI(self, cam_id):
cam = cams[cam_id]
#self.resize(800, 800)
self.showMaximized()
#self.devices = {}
self.Devices = DataViewer(self,name="Devices")
self.addWidget("Devices", self.Devices, position="left",
minSize=(250,800))
self.Measurement = DataViewer(self,name="Measurement")
self.addWidget("Measurement",self.Measurement,position="right",
relativeTo="Devices",minSize=(500,800))
self.cam_control = self.Devices.addWidget("Camera Control", CameraControlWidget(cam),
position="top",
minSize=(250,250))
#self.cam_control.cam_initialize_done.connect(start_the_rest)
self.acq_control = self.Devices.addWidget("Acquisition Settings",
AcquisitionWidget(cam, acquiring=False),
position="bottom", relativeTo="Camera Control",
minSize=(250,250))
# self.camAcquirer = dataAcquirerSpectral(cam.x, self.acq_control.new_data,
# mode)
self.delaystage = self.Devices.addWidget("Delay stage", DelayStageWidget(),
position="bottom", relativeTo="Camera Control",
minSize=(250,250))
self.shutter = self.Devices.addWidget("Beamshutter", BeamshutterWidget(),
position="bottom", relativeTo="Delay stage",
minSize=(250,0))
self.chopper = self.Devices.addWidget("Optical Chopper", ChopperControls(),
position="bottom", relativeTo="Beamshutter",
minSize=(250,0))
self.shutter.setEnabled(False)
self.chopper.setEnabled(False)
self.logfile = self.addWidget("Logfile", QtGui.QListWidget(self),
position="bottom",relativeTo="Devices")
self.plot_raw_sig = self.Measurement.addWidget("Camera Signal",
PlotterWidget(AvgPlotter, "Cam Sig", cam.x,
self.acq_control.new_probe_only),
position="top",
minSize=(250,250))
# self.plot_raw_sig = self.Measurement.addWidget("Signal: Probe only",
# PlotterWidget(PlotterWidgetSpectral1D,
# self.camAcquirer.new_data_processed,
# "Signal: Probe only"),
# position="top",
# minSize=(250,250))
self.plot_tas_sig = self.Measurement.addWidget("TAS Signal",
PlotterWidget(RatioPlotter, "TAS Sig", cam.x,
self.acq_control.new_probe_only,
self.acq_control.new_pump_probe),
position="below", relativeTo="Camera Signal",
minSize=(250,250))
self.plot_rms_sig = self.Measurement.addWidget("RMS Signal",
PlotterWidget(RmsPlotter, "RMS Sig", cam.x,
self.acq_control.new_probe_only),
position="bottom", relativeTo="Camera Signal",
minSize=(250,250))
self.acq_control.startDisplay.connect(self.plot_raw_sig.startAcq)
self.acq_control.abortDisplay.connect(self.plot_raw_sig.abortAcq)
self.acq_control.startDisplay.connect(self.plot_tas_sig.startAcq)
self.acq_control.abortDisplay.connect(self.plot_tas_sig.abortAcq)
self.acq_control.startDisplay.connect(self.plot_rms_sig.startAcq)
self.acq_control.abortDisplay.connect(self.plot_rms_sig.abortAcq)
self.joblist = self.Measurement.addWidget("Job List", JobListWidget(self),
position="bottom", relativeTo="RMS Signal",
minSize=(300,550))
# #self.chopper = self.Devices.addWidget("Optical Chopper", ChopperControls())
# #self.chopper.setEnabled(False)
self.addLogfile()
# class LabControl(DataViewer):
# def __init__(self,parent=None):
# #os.chdir(os.path.dirname(sys.argv[0]))
# DataViewer.__init__(self,parent)
# self.parent=parent
# self.resize(800,800)
# self.setWindowTitle("Lab Control")
# #self.setWindowIcon(QtGui.QIcon('LabView.png'))
# self.Devices=DataViewer(self,name="Devices")
# self.Measurement=DataViewer(self,name="Measurement")
# self.addWidget("Devices",self.Devices)
# self.addWidget("Measurement",self.Measurement,position="above",relativeTo="Devices",minSize=(250,350))
# self.Measurement.addWidget("ValveControl",ValveControl(),position="right",minSize=(250,250))
# self.logfile=self.addWidget("Logfile",QtGui.QListWidget(self),position="bottom",relativeTo="Devices")
# self.delaystage=self.Devices.addWidget("Delaystage",delaystage.DelayStageWidget(),minSize=(250,250))
# self.thShutter=self.Devices.addWidget("Thorlabs Beamshutter",ThorlabsBeamshutter.BeamshutterWidget(),position="right",relativeTo="Delaystage",minSize=(250,250))
# self.piShutter=self.Devices.addWidget("Picard Beamshutter",PicardShutter.PiShutter(),position="bottom",relativeTo="Thorlabs Beamshutter",minSize=(200,150))
# self.rotationstage=self.Devices.addWidget("Rotation Stage",RotationStage.RotationStageWidget(),position="bottom",relativeTo="Delaystage",minSize=(200,150))
# self.keithley=self.Devices.addWidget("Keithley",Keithley.KeithleyWidget(),position="left",minSize=(250,250))
# #self.themis=self.Measurement.addWidget("Themis",ThemisApplication.ThemisApplication(self),position="right",minSize=(250,550))
# self.themis=ThemisApplication.ThemisApplication(self)
# self.joblist=self.Measurement.addWidget("Job List",Joblist.JobListWidget(self),position="left",relativeTo="ValveControl",minSize=(300,550))
# self.addLogfile()
def closeEvent(self, event):
quit_msg = "Are you sure you want to exit the program?"
reply = QtGui.QMessageBox.question(self, 'Message',
quit_msg, QtGui.QMessageBox.Yes, QtGui.QMessageBox.No)
if reply == QtGui.QMessageBox.Yes:
event.accept()
self.cam_control.close()
#if hasattr(self.themis,"measurementItem"): self.themis.measurementItem.viewer.close()
else:
event.ignore()
def _del(self):
self.shutter._del()
#self.rotationstage._del()
def addLogfile(self):
self.delaystage.delaystage.throwMessage.connect(self.addToLogfile)
#self.thShutter.shut.throwMessage.connect(self.addToLogfile)
self.joblist.throwMessage.connect(self.addToLogfile)
#self.themis.throwMessage.connect(self.addToLogfile)
#self.piShutter.throwMessage.connect(self.addToLogfile)
#self.rotationstage.rotationStage.throwMessage.connect(self.addToLogfile)
def addToLogfile(self,msg,level=0):
message=""
for i in range(level):
message=" "+message
message=message+msg
self.logfile.addItem(message)
self.logfile.scrollToBottom()
def excepthook(self,type, value, tb):
#traceback.print_tb(tb)
if QCoreApplication.instance() is None:
app = QtGui.QApplication(sys.argv)
if type is Exception:
message = value.args[0]
detailed = value.args[1]
else:
message = "".join(traceback.format_exception_only(type, value) + [" " * 100])
detailed = "".join(traceback.format_tb(tb))
self.addToLogfile(message,0)
self.addToLogfile(detailed,2)
traceback.print_tb(tb)
print (message)
def init_UI(self, cam_id):
cam = cams[cam_id]
#self.resize(800, 800)
self.showMaximized()
#self.devices = {}
self.Devices = DataViewer(self,name="Devices")
self.addWidget("Devices", self.Devices, position="left",
minSize=(250,800))
self.Measurement = DataViewer(self,name="Measurement")
self.addWidget("Measurement",self.Measurement,position="right",
relativeTo="Devices",minSize=(500,800))
self.cam_control = self.Devices.addWidget("Camera Control", CameraControlWidget(cam),
position="top",
minSize=(250,250))
#self.cam_control.cam_initialize_done.connect(start_the_rest)
self.acq_control = self.Devices.addWidget("Acquisition Settings",
AcquisitionWidget(cam, acquiring=False),
position="bottom", relativeTo="Camera Control",
minSize=(250,250))
# self.camAcquirer = dataAcquirerSpectral(cam.x, self.acq_control.new_data,
# mode)
self.delaystage = self.Devices.addWidget("Delay stage", DelayStageWidget(),
position="bottom", relativeTo="Camera Control",
minSize=(250,250))
self.shutter = self.Devices.addWidget("Beamshutter", BeamshutterWidget(),
position="bottom", relativeTo="Delay stage",
minSize=(250,0))
self.chopper = self.Devices.addWidget("Optical Chopper", ChopperControls(),
position="bottom", relativeTo="Beamshutter",
minSize=(250,0))
self.shutter.setEnabled(False)
self.chopper.setEnabled(False)
self.logfile = self.addWidget("Logfile", QtGui.QListWidget(self),
position="bottom",relativeTo="Devices")
self.plot_raw_sig = self.Measurement.addWidget("Camera Signal",
PlotterWidget(AvgPlotter, "Cam Sig", cam.x,
self.acq_control.new_probe_only),
position="top",
minSize=(250,250))
# self.plot_raw_sig = self.Measurement.addWidget("Signal: Probe only",
# PlotterWidget(PlotterWidgetSpectral1D,
# self.camAcquirer.new_data_processed,
# "Signal: Probe only"),
# position="top",
# minSize=(250,250))
self.plot_tas_sig = self.Measurement.addWidget("TAS Signal",
PlotterWidget(RatioPlotter, "TAS Sig", cam.x,
self.acq_control.new_probe_only,
self.acq_control.new_pump_probe),
position="below", relativeTo="Camera Signal",
minSize=(250,250))
self.plot_rms_sig = self.Measurement.addWidget("RMS Signal",
PlotterWidget(RmsPlotter, "RMS Sig", cam.x,
self.acq_control.new_probe_only),
position="bottom", relativeTo="Camera Signal",
minSize=(250,250))
self.acq_control.startDisplay.connect(self.plot_raw_sig.startAcq)
self.acq_control.abortDisplay.connect(self.plot_raw_sig.abortAcq)
self.acq_control.startDisplay.connect(self.plot_tas_sig.startAcq)
self.acq_control.abortDisplay.connect(self.plot_tas_sig.abortAcq)
self.acq_control.startDisplay.connect(self.plot_rms_sig.startAcq)
self.acq_control.abortDisplay.connect(self.plot_rms_sig.abortAcq)
self.joblist = self.Measurement.addWidget("Job List", JobListWidget(self),
position="bottom", relativeTo="RMS Signal",
minSize=(300,550))
# #self.chopper = self.Devices.addWidget("Optical Chopper", ChopperControls())
# #self.chopper.setEnabled(False)
self.addLogfile()
def init_UI(self, cam_id):
cam = cams[cam_id]
#print(str(cam.x[0]) + str(cam.x[-1]) + "\n")
mode = "running"
#mode = "blockwise"
#self.resize(800, 800)
self.showMaximized()
#self.devices = {}
self.Devices = DataViewer(self,
name="Devices")
self.addWidget("Devices",
self.Devices,
position="left",
minSize=(250,800))
self.Measurement = DataViewer(self,
name="Measurement")
self.addWidget("Measurement",
self.Measurement,
position="right",
relativeTo="Devices",
minSize=(500,800))
self.controlCamera = self.Devices.addWidget("Camera Control",
CameraControlWidget(cam),
position="top",
minSize=(250,250))
#self.controlCamera.cam_initialize_done.connect(start_the_rest)
self.controlAcquisition = self.Devices.addWidget("Acquisition Settings",
AcquisitionWidget(cam, acquiring=False),
position="bottom",
relativeTo="Camera Control",
minSize=(250,250))
self.acquireCamera = DataAcquirerSpectral(cam.x,
self.controlAcquisition.new_data,
mode)
self.controlDelaystage = self.Devices.addWidget("Delay stage",
DelayStageWidget(),
position="bottom",
relativeTo="Camera Control",
minSize=(250,250))
# self.controlShutter1 = self.Devices.addWidget("Beamshutter",
# BeamshutterWidget(),
# position="bottom",
# relativeTo="Delay stage",
# minSize=(250,0))
# self.controlChopper1 = self.Devices.addWidget("Optical Chopper",
# ChopperControls(),
# position="bottom",
# relativeTo="Beamshutter",
# minSize=(250,0))
# self.controlShutter1.setEnabled(False)
# self.controlChopper1.setEnabled(False)
self.logfile = self.addWidget("Logfile",
QtGui.QListWidget(self),
position="bottom",
relativeTo="Devices")
self.plotterPOsig = self.Measurement.addWidget("Signal: Probe only",
PlotterWidgetSpectral1D(
self.acquireCamera.new_data_processed,
"Signal: Probe only"),
position="top",
minSize=(250,250))
self.plotterTAsig = self.Measurement.addWidget("Signal: Ratio",
PlotterWidgetSpectral1D(
self.acquireCamera.new_data_processed,
"Signal: Ratio"),
position="below",
relativeTo="Signal: Probe only",
minSize=(250,250))
self.plotterPOrms = self.Measurement.addWidget("RMS: Probe only",
PlotterWidgetSpectral1D(
self.acquireCamera.new_data_processed,
"RMS: Probe only"),
position="bottom",
relativeTo="Signal: Ratio",
minSize=(250,250))
# connect signals for plotters to start and stop displaying
self.controlAcquisition.startDisplay.connect(self.plotterPOsig.startAcq)
self.controlAcquisition.abortDisplay.connect(self.plotterPOsig.abortAcq)
self.controlAcquisition.startDisplay.connect(self.plotterTAsig.startAcq)
self.controlAcquisition.abortDisplay.connect(self.plotterTAsig.abortAcq)
self.controlAcquisition.startDisplay.connect(self.plotterPOrms.startAcq)
self.controlAcquisition.abortDisplay.connect(self.plotterPOrms.abortAcq)
self.joblist = self.Measurement.addWidget("Job List",
JobListWidget(self),
position="bottom",
relativeTo="RMS: Probe only",
minSize=(300,550))
self.addLogfile()
class DiffTASLab(DataViewer):
cam_initialize_done = QtCore.pyqtSignal(int, int)
spec_initialize = QtCore.pyqtSignal()
cam_initialize = QtCore.pyqtSignal()
def __init__(self):
super(DiffTASLab, self).__init__(parent=None)
self.cam_initialize_done.connect(self.init_UI)
self.init_andor_devices()
#self.init_UI()
def init_andor_devices(self):
"""Initialize all Andor devices (Cameras, Spectrograph).
Do not proceed before initializition is finished."""
# self.spec_initialize.connect(self.cam.spec.initialize,
# type=QtCore.Qt.BlockingQueuedConnection)
# self.cam_initialize.connect(self.cam.initialize,
# type=QtCore.Qt.BlockingQueuedConnection)
for actcam in cams:
# print("Connecting cam: " + actcam.name + "\n")
# self.cam_initialize.connect(actcam.initialize,
# type=QtCore.Qt.DirectConnection)
# print("Connecting spec: " + actcam.name + "\n")
# self.spec_initialize.connect(actcam.spec.initialize,
# type=QtCore.Qt.DirectConnection)
# #print("Init cam: " + actcam.name + "\n")
# self.cam_initialize.emit()
# print("Init spec: " + actcam.name + "\n")
# self.spec_initialize.emit()
print("Init camera: " + actcam.name + "\n")
actcam.initialize()
specs_aux.append(actcam.spec)
for actspec in specs_aux:
if len(specs) == 0:
specs.append(actspec)
else:
duplicate_spec = False
for sp in specs:
if actspec.serial == sp.serial:
duplicate_spec = True
if not duplicate_spec:
specs.append(actspec)
for actspec in specs:
print("Init spectrograph: " + actspec.name + "\n")
actspec.initialize()
print("Finished\n")
self.cam_initialize_done.emit(0, 0)
def init_UI(self, cam_id, spec_id):
cam = cams[cam_id]
spec = specs[spec_id]
#print(str(cam.x[0]) + str(cam.x[-1]) + "\n")
mode = "running"
#mode = "blockwise"
#self.resize(800, 800)
#self.showMaximized()
self.showNormal()
#self.devices = {}
self.Devices = DataViewer(self,
name="Devices")
self.addWidget("Devices",
self.Devices,
position="left",
minSize=(250,800))
self.Measurement = DataViewer(self,
name="Measurement")
self.addWidget("Measurement",
self.Measurement,
position="right",
relativeTo="Devices",
minSize=(500,800))
# self.controlCamera = self.Devices.addWidget("Camera Control",
# CameraControlWidget(cam),
# position="top",
# minSize=(250,250))
# #self.controlCamera.cam_initialize_done.connect(start_the_rest)
# self.controlAcquisition = self.Devices.addWidget("Acquisition Settings",
# AcquisitionWidget(cam, acquiring=False),
# position="bottom",
# relativeTo="Camera Control",
# minSize=(250,250))
self.controlAcquisition = self.Devices.addWidget("Camera and Spectrograph Settings",
AndorCamSpecWidget(cams,
specs,
acquiring=False),
position="top",
minSize=(250,250))
self.acquireCamera = DataAcquirerSpectral(cam.x,
self.controlAcquisition.new_data,
mode)
self.controlDelaystage = self.Devices.addWidget("Delay stage",
DelayStageWidget(),
position="bottom",
relativeTo="Camera and Spectrograph Settings",
minSize=(250,250))
# self.controlShutter1 = self.Devices.addWidget("Beamshutter",
# BeamshutterWidget(),
# position="bottom",
# relativeTo="Delay stage",
# minSize=(250,0))
# self.controlChopper1 = self.Devices.addWidget("Optical Chopper",
# ChopperControls(),
# position="bottom",
# relativeTo="Beamshutter",
# minSize=(250,0))
# self.controlShutter1.setEnabled(False)
# self.controlChopper1.setEnabled(False)
self.logfile = self.addWidget("Logfile",
QtGui.QListWidget(self),
position="bottom",
relativeTo="Devices")
self.plotterPOsig = self.Measurement.addWidget("Signal: Probe only",
PlotterWidgetSpectral1D(
self.acquireCamera.new_data_processed,
"Signal: Probe only"),
position="top",
minSize=(250,250))
self.plotterTAsig = self.Measurement.addWidget("Signal: Ratio",
PlotterWidgetSpectral1D(
self.acquireCamera.new_data_processed,
"Signal: Ratio"),
position="below",
relativeTo="Signal: Probe only",
minSize=(250,250))
self.plotterPOrms = self.Measurement.addWidget("RMS: Probe only",
PlotterWidgetSpectral1D(
self.acquireCamera.new_data_processed,
"RMS: Probe only"),
position="bottom",
relativeTo="Signal: Ratio",
minSize=(250,250))
# connect signals for plotters to start and stop displaying
self.controlAcquisition.startDisplay.connect(self.plotterPOsig.startAcq)
self.controlAcquisition.abortDisplay.connect(self.plotterPOsig.abortAcq)
self.controlAcquisition.startDisplay.connect(self.plotterTAsig.startAcq)
self.controlAcquisition.abortDisplay.connect(self.plotterTAsig.abortAcq)
self.controlAcquisition.startDisplay.connect(self.plotterPOrms.startAcq)
self.controlAcquisition.abortDisplay.connect(self.plotterPOrms.abortAcq)
self.joblist = self.Measurement.addWidget("Job List",
JobListWidget(self),
position="bottom",
relativeTo="RMS: Probe only",
minSize=(300,550))
#self.jobControl = self.Measurement.addWidget("Control",
# self.configWidget,position="left",Size=(2,2),minSize=(250,250),sizePolicy=(QtGui.QSizePolicy.Fixed,QtGui.QSizePolicy.Fixed))
self.addLogfile()
# class LabControl(DataViewer):
# def __init__(self,parent=None):
# #os.chdir(os.path.dirname(sys.argv[0]))
# DataViewer.__init__(self,parent)
# self.parent=parent
# self.resize(800,800)
# self.setWindowTitle("Lab Control")
# #self.setWindowIcon(QtGui.QIcon('LabView.png'))
# self.Devices=DataViewer(self,name="Devices")
# self.Measurement=DataViewer(self,name="Measurement")
# self.addWidget("Devices",self.Devices)
# self.addWidget("Measurement",self.Measurement,position="above",relativeTo="Devices",minSize=(250,350))
# self.Measurement.addWidget("ValveControl",ValveControl(),position="right",minSize=(250,250))
# self.logfile=self.addWidget("Logfile",QtGui.QListWidget(self),position="bottom",relativeTo="Devices")
# self.controlDelaystage=self.Devices.addWidget("Delaystage",controlDelaystage.DelayStageWidget(),minSize=(250,250))
# self.thShutter=self.Devices.addWidget("Thorlabs Beamshutter",ThorlabsBeamshutter.BeamshutterWidget(),position="right",relativeTo="Delaystage",minSize=(250,250))
# self.piShutter=self.Devices.addWidget("Picard Beamshutter",PicardShutter.PiShutter(),position="bottom",relativeTo="Thorlabs Beamshutter",minSize=(200,150))
# self.rotationstage=self.Devices.addWidget("Rotation Stage",RotationStage.RotationStageWidget(),position="bottom",relativeTo="Delaystage",minSize=(200,150))
# self.keithley=self.Devices.addWidget("Keithley",Keithley.KeithleyWidget(),position="left",minSize=(250,250))
# #self.themis=self.Measurement.addWidget("Themis",ThemisApplication.ThemisApplication(self),position="right",minSize=(250,550))
# self.themis=ThemisApplication.ThemisApplication(self)
# self.joblist=self.Measurement.addWidget("Job List",Joblist.JobListWidget(self),position="left",relativeTo="ValveControl",minSize=(300,550))
# self.addLogfile()
def closeEvent(self, event):
quit_msg = "Are you sure you want to exit the program?"
reply = QtGui.QMessageBox.question(self, 'Message',
quit_msg, QtGui.QMessageBox.Yes, QtGui.QMessageBox.No)
if reply == QtGui.QMessageBox.Yes:
event.accept()
#self.controlCamera.close()
#if hasattr(self.themis,"measurementItem"): self.themis.measurementItem.viewer.close()
else:
event.ignore()
def _del(self):
pass
#self.controlShutter1._del()
#self.rotationstage._del()
def addLogfile(self):
self.controlDelaystage.delaystage.throwMessage.connect(self.addToLogfile)
#self.thShutter.shut.throwMessage.connect(self.addToLogfile)
self.joblist.throwMessage.connect(self.addToLogfile)
#self.themis.throwMessage.connect(self.addToLogfile)
#self.piShutter.throwMessage.connect(self.addToLogfile)
#self.rotationstage.rotationStage.throwMessage.connect(self.addToLogfile)
def addToLogfile(self,msg,level=0):
message=""
for i in range(level):
message=" "+message
message=message+msg
self.logfile.addItem(message)
self.logfile.scrollToBottom()
def excepthook(self,type, value, tb):
#traceback.print_tb(tb)
if QCoreApplication.instance() is None:
app = QtGui.QApplication(sys.argv)
if type is Exception:
message = value.args[0]
detailed = value.args[1]
else:
message = "".join(traceback.format_exception_only(type, value) + [" " * 100])
detailed = "".join(traceback.format_tb(tb))
self.addToLogfile(message,0)
self.addToLogfile(detailed,2)
traceback.print_tb(tb)
print (message)
