def jobchange_step_repeat(self, event=None):
dlg = wx.TextEntryDialog(self, _("How many copies wide?"),
_("Enter Columns"), '')
dlg.SetValue('5')
if dlg.ShowModal() == wx.ID_OK:
try:
cols = int(dlg.GetValue())
except ValueError:
dlg.Destroy()
return
else:
dlg.Destroy()
return
dlg.Destroy()
dlg = wx.TextEntryDialog(self, _("How many copies high?"),
_("Enter Rows"), '')
dlg.SetValue('5')
if dlg.ShowModal() == wx.ID_OK:
try:
rows = int(dlg.GetValue())
except ValueError:
dlg.Destroy()
return
else:
dlg.Destroy()
return
dlg.Destroy()
dlg = wx.TextEntryDialog(
self,
_("How far apart are these copies width-wise? eg. 2in, 3cm, 50mm, 10%"
), _("Enter X Gap"), '')
dlg.SetValue('')
if dlg.ShowModal() == wx.ID_OK:
try:
x_distance = Length(dlg.GetValue()).value(
ppi=1000.0,
relative_length=self.device.bed_width * 39.3701)
except ValueError:
dlg.Destroy()
return
if isinstance(x_distance, Length):
dlg.Destroy()
return
else:
dlg.Destroy()
return
dlg.Destroy()
dlg = wx.TextEntryDialog(
self,
_("How far apart are these copies height-wise? eg. 2in, 3cm, 50mm, 10%"
), _("Enter Y Gap"), '')
dlg.SetValue('')
if dlg.ShowModal() == wx.ID_OK:
try:
y_distance = Length(dlg.GetValue()).value(
ppi=1000.0,
relative_length=self.device.bed_width * 39.3701)
except ValueError:
dlg.Destroy()
return
if isinstance(y_distance, Length):
dlg.Destroy()
return
else:
dlg.Destroy()
return
dlg.Destroy()
self.operations.clear()
self.preprocessor.commands = list()
x_distance = int(x_distance)
y_distance = int(y_distance)
x_last = 0
y_last = 0
y_pos = 0
x_pos = 0
for j in range(rows):
x_pos = 0
for k in range(cols):
x_offset = x_pos - x_last
y_offset = y_pos - y_last
self.operations.append(OperationPreprocessor.origin)
if x_offset != 0 or y_offset != 0:
self.operations.append(
OperationPreprocessor.offset(x_offset, y_offset))
self.operations.extend(list(self._original_ops))
x_last = x_pos
y_last = y_pos
x_pos += x_distance
y_pos += y_distance
if x_pos != 0 or y_pos != 0:
self.operations.append(OperationPreprocessor.offset(
-x_pos, -y_pos))
self.refresh_lists()
self.update_gui()
def __init__(self, parent, ops, *args, **kwds):
wx.Frame.__init__(self,
parent,
-1,
"",
style=wx.DEFAULT_FRAME_STYLE
| wx.FRAME_FLOAT_ON_PARENT | wx.TAB_TRAVERSAL)
Module.__init__(self)
self.SetSize((659, 612))
self.operations_listbox = wx.ListBox(self,
wx.ID_ANY,
choices=[],
style=wx.LB_ALWAYS_SB
| wx.LB_SINGLE)
self.commands_listbox = wx.ListBox(self,
wx.ID_ANY,
choices=[],
style=wx.LB_ALWAYS_SB
| wx.LB_SINGLE)
self.button_job_spooler = wx.BitmapButton(self, wx.ID_ANY,
icons8_route_50.GetBitmap())
self.button_writer_control = wx.Button(self, wx.ID_ANY, _("Start Job"))
self.button_writer_control.SetBitmap(icons8_laser_beam_52.GetBitmap())
self.button_writer_control.SetFont(
wx.Font(15, wx.FONTFAMILY_DEFAULT, wx.FONTSTYLE_NORMAL,
wx.FONTWEIGHT_NORMAL, 0, "Segoe UI"))
# Menu Bar
self.JobInfo_menubar = wx.MenuBar()
wxglade_tmp_menu = wx.Menu()
self.menu_prehome = wxglade_tmp_menu.Append(wx.ID_ANY,
_("Home Before"), "",
wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_home_before,
id=self.menu_prehome.GetId())
self.menu_autohome = wxglade_tmp_menu.Append(wx.ID_ANY,
_("Home After"), "",
wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_home_after,
id=self.menu_autohome.GetId())
self.menu_prephysicalhome = wxglade_tmp_menu.Append(
wx.ID_ANY, _("Physical Home Before"), "", wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_physicalhome_before,
id=self.menu_prephysicalhome.GetId())
self.menu_autophysicalhome = wxglade_tmp_menu.Append(
wx.ID_ANY, _("Physical Home After"), "", wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_physicalhome_after,
id=self.menu_autophysicalhome.GetId())
self.menu_autoorigin = wxglade_tmp_menu.Append(
wx.ID_ANY, _("Return to Origin After"), "", wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_origin_after,
id=self.menu_autoorigin.GetId())
self.menu_autobeep = wxglade_tmp_menu.Append(wx.ID_ANY,
_("Beep After"), "",
wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_beep_after,
id=self.menu_autobeep.GetId())
self.JobInfo_menubar.Append(wxglade_tmp_menu, _("Automatic"))
wxglade_tmp_menu = wx.Menu()
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Home"), "")
self.Bind(wx.EVT_MENU, self.jobadd_home, id=t.GetId())
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Physical Home"), "")
self.Bind(wx.EVT_MENU, self.jobadd_physicalhome, id=t.GetId())
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Wait"), "")
self.Bind(wx.EVT_MENU, self.jobadd_wait, id=t.GetId())
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Beep"), "")
self.Bind(wx.EVT_MENU, self.jobadd_beep, id=t.GetId())
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Interrupt"), "")
self.Bind(wx.EVT_MENU, self.jobadd_interrupt, id=t.GetId())
self.JobInfo_menubar.Append(wxglade_tmp_menu, _("Add"))
wxglade_tmp_menu = wx.Menu()
self.menu_rapid = wxglade_tmp_menu.Append(wx.ID_ANY,
_("Rapid Between"), "",
wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU, self.on_check_rapid, id=self.menu_rapid.GetId())
wxglade_tmp_menu.AppendSeparator()
self.menu_jog = wxglade_tmp_menu.Append(wx.ID_ANY, _("Jog Standard"),
"", wx.ITEM_RADIO)
self.Bind(wx.EVT_MENU, self.on_check_jog, id=self.menu_jog.GetId())
# self.menu_jog2 = wxglade_tmp_menu.Append(wx.ID_ANY, _("Jog Switch"), "", wx.ITEM_RADIO)
# self.Bind(wx.EVT_MENU, self.on_check_jog2, id=self.menu_jog2.GetId())
self.menu_jog3 = wxglade_tmp_menu.Append(wx.ID_ANY, _("Jog Finish"),
"", wx.ITEM_RADIO)
self.Bind(wx.EVT_MENU, self.on_check_jog3, id=self.menu_jog3.GetId())
self.JobInfo_menubar.Append(wxglade_tmp_menu, _("Settings"))
wxglade_tmp_menu = wx.Menu()
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Step and Repeat"))
self.Bind(wx.EVT_MENU, self.jobchange_step_repeat, id=t.GetId())
self.JobInfo_menubar.Append(wxglade_tmp_menu, _("Tools"))
self.SetMenuBar(self.JobInfo_menubar)
# Menu Bar end
self.__set_properties()
self.__do_layout()
self.Bind(wx.EVT_LISTBOX, self.on_listbox_operation_click,
self.operations_listbox)
self.Bind(wx.EVT_LISTBOX_DCLICK, self.on_listbox_operation_dclick,
self.operations_listbox)
self.Bind(wx.EVT_LISTBOX, self.on_listbox_commands_click,
self.commands_listbox)
self.Bind(wx.EVT_LISTBOX_DCLICK, self.on_listbox_commands_dclick,
self.commands_listbox)
self.Bind(wx.EVT_BUTTON, self.on_button_start_job,
self.button_writer_control)
self.Bind(wx.EVT_BUTTON, self.on_button_job_spooler,
self.button_job_spooler)
# end wxGlade
self.Bind(wx.EVT_CLOSE, self.on_close, self)
# OSX Window close
if parent is not None:
parent.accelerator_table(self)
# Moved to elements in 0.7.0
self.preprocessor = OperationPreprocessor()
if not isinstance(ops, list):
ops = [ops]
self.operations = ops
self._original_ops = list(ops)
class JobInfo(wx.Frame):
def __init__(self, *args, **kwds):
# begin wxGlade: JobInfo.__init__
kwds["style"] = kwds.get(
"style",
0) | wx.DEFAULT_FRAME_STYLE | wx.FRAME_TOOL_WINDOW | wx.STAY_ON_TOP
wx.Frame.__init__(self, *args, **kwds)
self.SetSize((659, 612))
self.operations_listbox = wx.ListBox(self,
wx.ID_ANY,
choices=[],
style=wx.LB_ALWAYS_SB
| wx.LB_SINGLE)
self.commands_listbox = wx.ListBox(self,
wx.ID_ANY,
choices=[],
style=wx.LB_ALWAYS_SB
| wx.LB_SINGLE)
self.button_job_spooler = wx.BitmapButton(self, wx.ID_ANY,
icons8_route_50.GetBitmap())
self.button_writer_control = wx.Button(self, wx.ID_ANY, _("Start Job"))
self.button_writer_control.SetBitmap(icons8_laser_beam_52.GetBitmap())
self.button_writer_control.SetFont(
wx.Font(15, wx.FONTFAMILY_DEFAULT, wx.FONTSTYLE_NORMAL,
wx.FONTWEIGHT_NORMAL, 0, "Segoe UI"))
# Menu Bar
self.JobInfo_menubar = wx.MenuBar()
wxglade_tmp_menu = wx.Menu()
self.menu_autostart = wxglade_tmp_menu.Append(wx.ID_ANY,
_("Start Spooler"), "",
wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_auto_start_controller,
id=self.menu_autostart.GetId())
self.menu_autohome = wxglade_tmp_menu.Append(wx.ID_ANY,
_("Home After"), "",
wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_home_after,
id=self.menu_autohome.GetId())
self.menu_autobeep = wxglade_tmp_menu.Append(wx.ID_ANY,
_("Beep After"), "",
wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_beep_after,
id=self.menu_autobeep.GetId())
self.JobInfo_menubar.Append(wxglade_tmp_menu, _("Automatic"))
wxglade_tmp_menu = wx.Menu()
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Home"), "")
self.Bind(wx.EVT_MENU, self.jobadd_home, id=t.GetId())
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Wait"), "")
self.Bind(wx.EVT_MENU, self.jobadd_wait, id=t.GetId())
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Beep"), "")
self.Bind(wx.EVT_MENU, self.jobadd_beep, id=t.GetId())
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Interrupt"), "")
self.Bind(wx.EVT_MENU, self.jobadd_interrupt, id=t.GetId())
self.JobInfo_menubar.Append(wxglade_tmp_menu, _("Add"))
self.SetMenuBar(self.JobInfo_menubar)
# Menu Bar end
self.__set_properties()
self.__do_layout()
self.Bind(wx.EVT_LISTBOX, self.on_listbox_operation_click,
self.operations_listbox)
self.Bind(wx.EVT_LISTBOX_DCLICK, self.on_listbox_operation_dclick,
self.operations_listbox)
self.Bind(wx.EVT_LISTBOX, self.on_listbox_commands_click,
self.commands_listbox)
self.Bind(wx.EVT_LISTBOX_DCLICK, self.on_listbox_commands_dclick,
self.commands_listbox)
self.Bind(wx.EVT_BUTTON, self.on_button_start_job,
self.button_writer_control)
self.Bind(wx.EVT_BUTTON, self.on_button_job_spooler,
self.button_job_spooler)
# end wxGlade
self.Bind(wx.EVT_CLOSE, self.on_close, self)
self.preprocessor = OperationPreprocessor()
self.kernel = None
self.device = None
self.operations = []
def jobadd_home(self, event):
self.operations.append(OperationPreprocessor.home)
self.update_gui()
def jobadd_wait(self, event):
self.operations.append(OperationPreprocessor.wait)
self.update_gui()
def jobadd_beep(self, event):
self.operations.append(OperationPreprocessor.beep)
self.update_gui()
def jobadd_interrupt(self, event):
self.operations.append(self.interrupt)
self.update_gui()
def interrupt(self):
yield COMMAND_WAIT_BUFFER_EMPTY
yield COMMAND_FUNCTION, self.interrupt_popup
def interrupt_popup(self):
dlg = wx.MessageDialog(
None, _("Spooling Interrupted. Press OK to Continue."),
_("Interrupt"), wx.OK)
dlg.ShowModal()
dlg.Destroy()
def set_operations(self, operations):
self.preprocessor.kernel = self.kernel
self.preprocessor.device = self.device
if not isinstance(operations, list):
operations = [operations]
self.operations.clear()
for op in operations:
self.operations.append(copy(op))
if self.device.autobeep:
self.jobadd_beep(None)
if self.device.autohome:
self.jobadd_home(None)
self.preprocessor.process(self.operations)
self.update_gui()
def set_device(self, device):
self.device = device
if self.device is None:
for attr in dir(self):
value = getattr(self, attr)
if isinstance(value, wx.Control):
value.Enable(False)
dlg = wx.MessageDialog(None,
_("You do not have a selected device."),
_("No Device Selected."),
wx.OK | wx.ICON_WARNING)
result = dlg.ShowModal()
dlg.Destroy()
else:
self.menu_autohome.Check(device.autohome)
self.menu_autobeep.Check(device.autobeep)
self.menu_autostart.Check(device.autostart)
def set_kernel(self, kernel):
self.kernel = kernel
self.set_device(kernel.device)
self.operations = []
self.kernel.listen("element_property_update",
self.on_element_property_update)
def on_close(self, event):
self.kernel.unlisten("element_property_update",
self.on_element_property_update)
self.kernel.mark_window_closed("JobInfo")
self.kernel = None
event.Skip() # Call destroy as regular.
def __set_properties(self):
# begin wxGlade: JobInfo.__set_properties
self.SetTitle("Job")
self.operations_listbox.SetToolTip(_("operation List"))
self.commands_listbox.SetToolTip(_("Command List"))
self.button_writer_control.SetToolTip(_("Start the Job"))
self.button_job_spooler.SetMinSize((50, 50))
self.button_job_spooler.SetToolTip(_("View Spooler"))
# end wxGlade
def __do_layout(self):
# begin wxGlade: JobInfo.__do_layout
sizer_2 = wx.BoxSizer(wx.VERTICAL)
sizer_3 = wx.BoxSizer(wx.HORIZONTAL)
sizer_1 = wx.StaticBoxSizer(
wx.StaticBox(self, wx.ID_ANY, _("Operations and Commands")),
wx.HORIZONTAL)
sizer_1.Add(self.operations_listbox, 10, wx.EXPAND, 0)
sizer_1.Add(self.commands_listbox, 3, wx.EXPAND, 0)
sizer_2.Add(sizer_1, 10, wx.EXPAND, 0)
sizer_3.Add(self.button_writer_control, 1, wx.EXPAND, 0)
sizer_3.Add(self.button_job_spooler, 0, 0, 0)
sizer_2.Add(sizer_3, 1, wx.EXPAND, 0)
self.SetSizer(sizer_2)
self.Layout()
self.Centre()
# end wxGlade
def on_check_auto_start_controller(
self, event): # wxGlade: JobInfo.<event_handler>
self.device.autostart = self.menu_autostart.IsChecked()
def on_check_home_after(self, event): # wxGlade: JobInfo.<event_handler>
self.device.autohome = self.menu_autohome.IsChecked()
def on_check_beep_after(self, event): # wxGlade: JobInfo.<event_handler>
self.device.autobeep = self.menu_autobeep.IsChecked()
def on_button_job_spooler(self,
event=None): # wxGlade: JobInfo.<event_handler>
self.kernel.open_window("JobSpooler")
def on_button_start_job(self, event): # wxGlade: JobInfo.<event_handler>
if len(self.preprocessor.commands) == 0:
self.device.send_job(self.operations)
self.on_button_job_spooler()
self.kernel.close_old_window("JobInfo")
else:
self.preprocessor.execute()
self.update_gui()
def on_listbox_operation_click(self,
event): # wxGlade: JobInfo.<event_handler>
event.Skip()
def on_listbox_operation_dclick(self,
event): # wxGlade: JobInfo.<event_handler>
node_index = self.operations_listbox.GetSelection()
if node_index == -1:
return
obj = self.operations[node_index]
if isinstance(obj, RasterOperation):
self.kernel.open_window("RasterProperty").set_operation(obj)
elif isinstance(obj, (CutOperation, EngraveOperation)):
self.kernel.open_window("EngraveProperty").set_operation(obj)
event.Skip()
def on_listbox_commands_click(self,
event): # wxGlade: JobInfo.<event_handler>
print("Event handler 'on_listbox_commands_click' not implemented!")
event.Skip()
def on_listbox_commands_dclick(self,
event): # wxGlade: JobInfo.<event_handler>
print("Event handler 'on_listbox_commands_dclick' not implemented!")
event.Skip()
def on_element_property_update(self, *args):
self.update_gui()
def update_gui(self):
def name_str(e):
try:
return e.__name__
except AttributeError:
return str(e)
self.commands_listbox.Clear()
self.operations_listbox.Clear()
operations = self.operations
commands = self.preprocessor.commands
if operations is not None and len(operations) != 0:
self.operations_listbox.InsertItems(
[name_str(e) for e in self.operations], 0)
if commands is not None and len(commands) != 0:
self.commands_listbox.InsertItems(
[name_str(e) for e in self.preprocessor.commands], 0)
self.button_writer_control.SetLabelText(_("Execute Commands"))
self.button_writer_control.SetBackgroundColour(
wx.Colour(255, 255, 102))
else:
self.button_writer_control.SetLabelText(_("Start Job"))
self.button_writer_control.SetBackgroundColour(
wx.Colour(102, 255, 102))
self.Refresh()
class JobInfo(wx.Frame, Module):
def __init__(self, parent, ops, *args, **kwds):
wx.Frame.__init__(self,
parent,
-1,
"",
style=wx.DEFAULT_FRAME_STYLE
| wx.FRAME_FLOAT_ON_PARENT | wx.TAB_TRAVERSAL)
Module.__init__(self)
self.SetSize((659, 612))
self.operations_listbox = wx.ListBox(self,
wx.ID_ANY,
choices=[],
style=wx.LB_ALWAYS_SB
| wx.LB_SINGLE)
self.commands_listbox = wx.ListBox(self,
wx.ID_ANY,
choices=[],
style=wx.LB_ALWAYS_SB
| wx.LB_SINGLE)
self.button_job_spooler = wx.BitmapButton(self, wx.ID_ANY,
icons8_route_50.GetBitmap())
self.button_writer_control = wx.Button(self, wx.ID_ANY, _("Start Job"))
self.button_writer_control.SetBitmap(icons8_laser_beam_52.GetBitmap())
self.button_writer_control.SetFont(
wx.Font(15, wx.FONTFAMILY_DEFAULT, wx.FONTSTYLE_NORMAL,
wx.FONTWEIGHT_NORMAL, 0, "Segoe UI"))
# Menu Bar
self.JobInfo_menubar = wx.MenuBar()
wxglade_tmp_menu = wx.Menu()
self.menu_prehome = wxglade_tmp_menu.Append(wx.ID_ANY,
_("Home Before"), "",
wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_home_before,
id=self.menu_prehome.GetId())
self.menu_autohome = wxglade_tmp_menu.Append(wx.ID_ANY,
_("Home After"), "",
wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_home_after,
id=self.menu_autohome.GetId())
self.menu_prephysicalhome = wxglade_tmp_menu.Append(
wx.ID_ANY, _("Physical Home Before"), "", wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_physicalhome_before,
id=self.menu_prephysicalhome.GetId())
self.menu_autophysicalhome = wxglade_tmp_menu.Append(
wx.ID_ANY, _("Physical Home After"), "", wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_physicalhome_after,
id=self.menu_autophysicalhome.GetId())
self.menu_autoorigin = wxglade_tmp_menu.Append(
wx.ID_ANY, _("Return to Origin After"), "", wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_origin_after,
id=self.menu_autoorigin.GetId())
self.menu_autobeep = wxglade_tmp_menu.Append(wx.ID_ANY,
_("Beep After"), "",
wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_beep_after,
id=self.menu_autobeep.GetId())
self.JobInfo_menubar.Append(wxglade_tmp_menu, _("Automatic"))
wxglade_tmp_menu = wx.Menu()
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Home"), "")
self.Bind(wx.EVT_MENU, self.jobadd_home, id=t.GetId())
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Physical Home"), "")
self.Bind(wx.EVT_MENU, self.jobadd_physicalhome, id=t.GetId())
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Wait"), "")
self.Bind(wx.EVT_MENU, self.jobadd_wait, id=t.GetId())
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Beep"), "")
self.Bind(wx.EVT_MENU, self.jobadd_beep, id=t.GetId())
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Interrupt"), "")
self.Bind(wx.EVT_MENU, self.jobadd_interrupt, id=t.GetId())
self.JobInfo_menubar.Append(wxglade_tmp_menu, _("Add"))
wxglade_tmp_menu = wx.Menu()
self.menu_rapid = wxglade_tmp_menu.Append(wx.ID_ANY,
_("Rapid Between"), "",
wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU, self.on_check_rapid, id=self.menu_rapid.GetId())
wxglade_tmp_menu.AppendSeparator()
self.menu_jog = wxglade_tmp_menu.Append(wx.ID_ANY, _("Jog Standard"),
"", wx.ITEM_RADIO)
self.Bind(wx.EVT_MENU, self.on_check_jog, id=self.menu_jog.GetId())
# self.menu_jog2 = wxglade_tmp_menu.Append(wx.ID_ANY, _("Jog Switch"), "", wx.ITEM_RADIO)
# self.Bind(wx.EVT_MENU, self.on_check_jog2, id=self.menu_jog2.GetId())
self.menu_jog3 = wxglade_tmp_menu.Append(wx.ID_ANY, _("Jog Finish"),
"", wx.ITEM_RADIO)
self.Bind(wx.EVT_MENU, self.on_check_jog3, id=self.menu_jog3.GetId())
self.JobInfo_menubar.Append(wxglade_tmp_menu, _("Settings"))
wxglade_tmp_menu = wx.Menu()
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Step and Repeat"))
self.Bind(wx.EVT_MENU, self.jobchange_step_repeat, id=t.GetId())
self.JobInfo_menubar.Append(wxglade_tmp_menu, _("Tools"))
self.SetMenuBar(self.JobInfo_menubar)
# Menu Bar end
self.__set_properties()
self.__do_layout()
self.Bind(wx.EVT_LISTBOX, self.on_listbox_operation_click,
self.operations_listbox)
self.Bind(wx.EVT_LISTBOX_DCLICK, self.on_listbox_operation_dclick,
self.operations_listbox)
self.Bind(wx.EVT_LISTBOX, self.on_listbox_commands_click,
self.commands_listbox)
self.Bind(wx.EVT_LISTBOX_DCLICK, self.on_listbox_commands_dclick,
self.commands_listbox)
self.Bind(wx.EVT_BUTTON, self.on_button_start_job,
self.button_writer_control)
self.Bind(wx.EVT_BUTTON, self.on_button_job_spooler,
self.button_job_spooler)
# end wxGlade
self.Bind(wx.EVT_CLOSE, self.on_close, self)
# OSX Window close
if parent is not None:
parent.accelerator_table(self)
# Moved to elements in 0.7.0
self.preprocessor = OperationPreprocessor()
if not isinstance(ops, list):
ops = [ops]
self.operations = ops
self._original_ops = list(ops)
def jobchange_step_repeat(self, event=None):
dlg = wx.TextEntryDialog(self, _("How many copies wide?"),
_("Enter Columns"), '')
dlg.SetValue('5')
if dlg.ShowModal() == wx.ID_OK:
try:
cols = int(dlg.GetValue())
except ValueError:
dlg.Destroy()
return
else:
dlg.Destroy()
return
dlg.Destroy()
dlg = wx.TextEntryDialog(self, _("How many copies high?"),
_("Enter Rows"), '')
dlg.SetValue('5')
if dlg.ShowModal() == wx.ID_OK:
try:
rows = int(dlg.GetValue())
except ValueError:
dlg.Destroy()
return
else:
dlg.Destroy()
return
dlg.Destroy()
dlg = wx.TextEntryDialog(
self,
_("How far apart are these copies width-wise? eg. 2in, 3cm, 50mm, 10%"
), _("Enter X Gap"), '')
dlg.SetValue('')
if dlg.ShowModal() == wx.ID_OK:
try:
x_distance = Length(dlg.GetValue()).value(
ppi=1000.0,
relative_length=self.device.bed_width * 39.3701)
except ValueError:
dlg.Destroy()
return
if isinstance(x_distance, Length):
dlg.Destroy()
return
else:
dlg.Destroy()
return
dlg.Destroy()
dlg = wx.TextEntryDialog(
self,
_("How far apart are these copies height-wise? eg. 2in, 3cm, 50mm, 10%"
), _("Enter Y Gap"), '')
dlg.SetValue('')
if dlg.ShowModal() == wx.ID_OK:
try:
y_distance = Length(dlg.GetValue()).value(
ppi=1000.0,
relative_length=self.device.bed_width * 39.3701)
except ValueError:
dlg.Destroy()
return
if isinstance(y_distance, Length):
dlg.Destroy()
return
else:
dlg.Destroy()
return
dlg.Destroy()
self.operations.clear()
self.preprocessor.commands = list()
x_distance = int(x_distance)
y_distance = int(y_distance)
x_last = 0
y_last = 0
y_pos = 0
x_pos = 0
for j in range(rows):
x_pos = 0
for k in range(cols):
x_offset = x_pos - x_last
y_offset = y_pos - y_last
self.operations.append(OperationPreprocessor.origin)
if x_offset != 0 or y_offset != 0:
self.operations.append(
OperationPreprocessor.offset(x_offset, y_offset))
self.operations.extend(list(self._original_ops))
x_last = x_pos
y_last = y_pos
x_pos += x_distance
y_pos += y_distance
if x_pos != 0 or y_pos != 0:
self.operations.append(OperationPreprocessor.offset(
-x_pos, -y_pos))
self.refresh_lists()
self.update_gui()
def jobadd_physicalhome(self, event=None):
self.operations.append(OperationPreprocessor.physicalhome)
self.update_gui()
def jobadd_home(self, event=None):
self.operations.append(OperationPreprocessor.home)
self.update_gui()
def jobadd_origin(self, event=None):
self.operations.append(OperationPreprocessor.origin)
self.update_gui()
def jobadd_wait(self, event=None):
self.operations.append(OperationPreprocessor.wait)
self.update_gui()
def jobadd_beep(self, event=None):
self.operations.append(OperationPreprocessor.beep)
self.update_gui()
def jobadd_interrupt(self, event=None):
self.operations.append(self.interrupt)
self.update_gui()
def interrupt(self):
yield COMMAND_WAIT_FINISH
yield COMMAND_FUNCTION, self.interrupt_popup
def interrupt_popup(self):
dlg = wx.MessageDialog(
None, _("Spooling Interrupted. Press OK to Continue."),
_("Interrupt"), wx.OK)
dlg.ShowModal()
dlg.Destroy()
def on_close(self, event):
if self.state == 5:
event.Veto()
else:
self.state = 5
self.device.close('window', self.name)
event.Skip() # Call destroy as regular.
def initialize(self, channel=None):
self.device.close('window', self.name)
self.Show()
self.device.device_root.setting(bool, "auto_spooler", True)
self.device.setting(bool, "rotary", False)
self.device.setting(float, "scale_x", 1.0)
self.device.setting(float, "scale_y", 1.0)
self.device.setting(bool, "prehome", False)
self.device.setting(bool, "autohome", False)
self.device.setting(bool, "prephysicalhome", False)
self.device.setting(bool, "autophysicalhome", False)
self.device.setting(bool, "autoorigin", False)
self.device.setting(bool, "autobeep", True)
self.device.setting(bool, "autostart", True)
self.device.setting(bool, "opt_rapid_between", True)
self.device.setting(int, "opt_jog_mode", 0)
self.device.listen('element_property_update',
self.on_element_property_update)
self.menu_prehome.Check(self.device.prehome)
self.menu_autohome.Check(self.device.autohome)
self.menu_prephysicalhome.Check(self.device.prephysicalhome)
self.menu_autophysicalhome.Check(self.device.autophysicalhome)
self.menu_autoorigin.Check(self.device.autoorigin)
self.menu_autobeep.Check(self.device.autobeep)
jog_mode = self.device.opt_jog_mode
self.menu_jog.Check(False)
# self.menu_jog2.Check(False)
self.menu_jog3.Check(False)
if jog_mode == 0:
self.menu_jog.Check(True)
elif jog_mode == 1:
# self.menu_jog2.Check(True)
pass
else:
self.menu_jog3.Check(True)
self.menu_rapid.Check(self.device.opt_rapid_between)
self.preprocessor.device = self.device
self.refresh_lists()
def refresh_lists(self):
operations = list(self.operations)
self.operations.clear()
if self.device.prephysicalhome:
if not self.device.rotary:
self.jobadd_physicalhome()
else:
self.operations.append(
_("Physical Home Before: Disabled (Rotary On)"))
if self.device.prehome:
if not self.device.rotary:
self.jobadd_home()
else:
self.operations.append(_("Home Before: Disabled (Rotary On)"))
for op in operations:
try:
if len(op) == 0:
continue
if not op.output:
continue
self.operations.append(copy(op))
except TypeError: # direct copy function
self.operations.append(op)
if self.device.autobeep:
self.jobadd_beep()
if self.device.autophysicalhome:
if not self.device.rotary:
self.jobadd_physicalhome()
else:
self.operations.append(
_("Physical Home After: Disabled (Rotary On)"))
if self.device.autohome:
if not self.device.rotary:
self.jobadd_home()
else:
self.operations.append(_("Home After: Disabled (Rotary On)"))
if self.device.autoorigin:
self.jobadd_origin()
self.preprocessor.process(self.operations)
self.update_gui()
def finalize(self, channel=None):
self.device.unlisten('element_property_update',
self.on_element_property_update)
try:
self.Close()
except RuntimeError:
pass
def shutdown(self, channel=None):
try:
self.Close()
except RuntimeError:
pass
def __set_properties(self):
_icon = wx.NullIcon
_icon.CopyFromBitmap(icons8_laser_beam_52.GetBitmap())
self.SetIcon(_icon)
# begin wxGlade: JobInfo.__set_properties
self.SetTitle("Job")
self.operations_listbox.SetToolTip(_("operation List"))
self.commands_listbox.SetToolTip(_("Command List"))
self.button_writer_control.SetToolTip(_("Start the Job"))
self.button_writer_control.SetForegroundColour(wx.BLACK)
self.button_job_spooler.SetMinSize((50, 50))
self.button_job_spooler.SetToolTip(_("View Spooler"))
# end wxGlade
def __do_layout(self):
# begin wxGlade: JobInfo.__do_layout
sizer_2 = wx.BoxSizer(wx.VERTICAL)
sizer_3 = wx.BoxSizer(wx.HORIZONTAL)
sizer_1 = wx.StaticBoxSizer(
wx.StaticBox(self, wx.ID_ANY, _("Operations and Commands")),
wx.HORIZONTAL)
sizer_1.Add(self.operations_listbox, 10, wx.EXPAND, 0)
sizer_1.Add(self.commands_listbox, 3, wx.EXPAND, 0)
sizer_2.Add(sizer_1, 10, wx.EXPAND, 0)
sizer_3.Add(self.button_writer_control, 1, wx.EXPAND, 0)
sizer_3.Add(self.button_job_spooler, 0, wx.EXPAND, 0)
sizer_2.Add(sizer_3, 1, wx.EXPAND, 0)
self.SetSizer(sizer_2)
self.Layout()
self.Centre()
# end wxGlade
def on_check_rapid(self, event):
self.device.opt_rapid_between = self.menu_rapid.IsChecked()
def on_check_jog(self, event):
if self.menu_jog.IsChecked():
self.device.opt_jog_mode = 0
# def on_check_jog2(self, event):
# if self.menu_jog2.IsChecked():
# self.device.opt_jog_mode = 1
def on_check_jog3(self, event):
if self.menu_jog3.IsChecked():
self.device.opt_jog_mode = 2
def on_check_home_before(self, event): # wxGlade: JobInfo.<event_handler>
self.device.prehome = self.menu_prehome.IsChecked()
self.operations = list(self._original_ops)
self.preprocessor.commands = list()
self.refresh_lists()
def on_check_home_after(self, event): # wxGlade: JobInfo.<event_handler>
self.device.autohome = self.menu_autohome.IsChecked()
self.operations = list(self._original_ops)
self.preprocessor.commands = list()
self.refresh_lists()
def on_check_physicalhome_before(
self, event): # wxGlade: JobInfo.<event_handler>
self.device.prephysicalhome = self.menu_prephysicalhome.IsChecked()
self.operations = list(self._original_ops)
self.preprocessor.commands = list()
self.refresh_lists()
def on_check_physicalhome_after(self,
event): # wxGlade: JobInfo.<event_handler>
self.device.autophysicalhome = self.menu_autophysicalhome.IsChecked()
self.operations = list(self._original_ops)
self.preprocessor.commands = list()
self.refresh_lists()
def on_check_origin_after(self, event): # wxGlade: JobInfo.<event_handler>
self.device.autoorigin = self.menu_autoorigin.IsChecked()
self.operations = list(self._original_ops)
self.preprocessor.commands = list()
self.refresh_lists()
def on_check_beep_after(self, event): # wxGlade: JobInfo.<event_handler>
self.device.autobeep = self.menu_autobeep.IsChecked()
self.operations = list(self._original_ops)
self.preprocessor.commands = list()
self.refresh_lists()
def on_button_job_spooler(self,
event=None): # wxGlade: JobInfo.<event_handler>
if self.device.device_root.auto_spooler:
self.device.open('window', "JobSpooler", self.GetParent())
def on_button_start_job(self, event): # wxGlade: JobInfo.<event_handler>
if len(self.preprocessor.commands) == 0:
self.device.spooler.jobs(self.operations)
self.on_button_job_spooler()
self.device.close('window', "JobInfo")
else:
self.preprocessor.execute()
self.update_gui()
def on_listbox_operation_click(self,
event): # wxGlade: JobInfo.<event_handler>
event.Skip()
def on_listbox_operation_dclick(self,
event): # wxGlade: JobInfo.<event_handler>
node_index = self.operations_listbox.GetSelection()
if node_index == -1:
return
obj = self.operations[node_index]
if isinstance(obj, LaserOperation):
self.device.open('window', "OperationProperty", self, obj)
event.Skip()
def on_listbox_commands_click(self,
event): # wxGlade: JobInfo.<event_handler>
# print("Event handler 'on_listbox_commands_click' not implemented!")
event.Skip()
def on_listbox_commands_dclick(self,
event): # wxGlade: JobInfo.<event_handler>
# print("Event handler 'on_listbox_commands_dclick' not implemented!")
event.Skip()
def on_element_property_update(self, *args):
self.update_gui()
def update_gui(self):
def name_str(e):
try:
return e.__name__
except AttributeError:
return str(e)
self.commands_listbox.Clear()
self.operations_listbox.Clear()
operations = self.operations
commands = self.preprocessor.commands
if operations is not None and len(operations) != 0:
self.operations_listbox.InsertItems(
[name_str(e) for e in self.operations], 0)
if commands is not None and len(commands) != 0:
self.commands_listbox.InsertItems(
[name_str(e) for e in self.preprocessor.commands], 0)
self.button_writer_control.SetLabelText(_("Execute Commands"))
self.button_writer_control.SetBackgroundColour(
wx.Colour(255, 255, 102))
else:
self.button_writer_control.SetLabelText(_("Start Job"))
self.button_writer_control.SetBackgroundColour(
wx.Colour(102, 255, 102))
self.Refresh()
def __init__(self, *args, **kwds):
# begin wxGlade: JobInfo.__init__
kwds["style"] = kwds.get(
"style",
0) | wx.DEFAULT_FRAME_STYLE | wx.FRAME_TOOL_WINDOW | wx.STAY_ON_TOP
wx.Frame.__init__(self, *args, **kwds)
self.SetSize((659, 612))
self.operations_listbox = wx.ListBox(self,
wx.ID_ANY,
choices=[],
style=wx.LB_ALWAYS_SB
| wx.LB_SINGLE)
self.commands_listbox = wx.ListBox(self,
wx.ID_ANY,
choices=[],
style=wx.LB_ALWAYS_SB
| wx.LB_SINGLE)
self.button_job_spooler = wx.BitmapButton(self, wx.ID_ANY,
icons8_route_50.GetBitmap())
self.button_writer_control = wx.Button(self, wx.ID_ANY, _("Start Job"))
self.button_writer_control.SetBitmap(icons8_laser_beam_52.GetBitmap())
self.button_writer_control.SetFont(
wx.Font(15, wx.FONTFAMILY_DEFAULT, wx.FONTSTYLE_NORMAL,
wx.FONTWEIGHT_NORMAL, 0, "Segoe UI"))
# Menu Bar
self.JobInfo_menubar = wx.MenuBar()
wxglade_tmp_menu = wx.Menu()
self.menu_autostart = wxglade_tmp_menu.Append(wx.ID_ANY,
_("Start Spooler"), "",
wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_auto_start_controller,
id=self.menu_autostart.GetId())
self.menu_autohome = wxglade_tmp_menu.Append(wx.ID_ANY,
_("Home After"), "",
wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_home_after,
id=self.menu_autohome.GetId())
self.menu_autobeep = wxglade_tmp_menu.Append(wx.ID_ANY,
_("Beep After"), "",
wx.ITEM_CHECK)
self.Bind(wx.EVT_MENU,
self.on_check_beep_after,
id=self.menu_autobeep.GetId())
self.JobInfo_menubar.Append(wxglade_tmp_menu, _("Automatic"))
wxglade_tmp_menu = wx.Menu()
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Home"), "")
self.Bind(wx.EVT_MENU, self.jobadd_home, id=t.GetId())
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Wait"), "")
self.Bind(wx.EVT_MENU, self.jobadd_wait, id=t.GetId())
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Beep"), "")
self.Bind(wx.EVT_MENU, self.jobadd_beep, id=t.GetId())
t = wxglade_tmp_menu.Append(wx.ID_ANY, _("Interrupt"), "")
self.Bind(wx.EVT_MENU, self.jobadd_interrupt, id=t.GetId())
self.JobInfo_menubar.Append(wxglade_tmp_menu, _("Add"))
self.SetMenuBar(self.JobInfo_menubar)
# Menu Bar end
self.__set_properties()
self.__do_layout()
self.Bind(wx.EVT_LISTBOX, self.on_listbox_operation_click,
self.operations_listbox)
self.Bind(wx.EVT_LISTBOX_DCLICK, self.on_listbox_operation_dclick,
self.operations_listbox)
self.Bind(wx.EVT_LISTBOX, self.on_listbox_commands_click,
self.commands_listbox)
self.Bind(wx.EVT_LISTBOX_DCLICK, self.on_listbox_commands_dclick,
self.commands_listbox)
self.Bind(wx.EVT_BUTTON, self.on_button_start_job,
self.button_writer_control)
self.Bind(wx.EVT_BUTTON, self.on_button_job_spooler,
self.button_job_spooler)
# end wxGlade
self.Bind(wx.EVT_CLOSE, self.on_close, self)
self.preprocessor = OperationPreprocessor()
self.kernel = None
self.device = None
self.operations = []