#Testing file for oven class and problems!
import serial
import sys #call sys.exit() to exit program, useful for errors
from OvenClass import OvenClass
#Assign com ports and iD's
nozzleCOM = 'COM2'
resCOM = 'COM5'
nozzleID = 1
reservoirID = 2
#Assign an oven object to nozzle and reservoir
nozzle = OvenClass(nozzleCOM)
reservoir = OvenClass(resCOM)
#Use the functions to test them
#nozzle.write_setpoint(200)
nozzle.read_temperature()
nozzle.read_setpoint()
nozzle.read_iD()
#reservoir.write_setpoint(100)
reservoir.read_temperature()
reservoir.read_setpoint()
reservoir.read_iD()
print('Nozzle temperature:')
print(nozzle.temperature)
print('Nozzle setpoint:')
print(nozzle.setpoint)
#Useful variables
newNozzleSetpoint = -1.0
newReservoirSetpoint = -1.0
maxNozzleTemperature = 575.0
maxReservoirTemperature = 375.0
totalTime = 0
timeInterval=300 #seconds
#Assign com ports and iD's which are checked
nozzleCOM='COM2'
reservoirCOM='COM5'
nozzleID=1
reservoirID=2
#Assign an oven object to nozzle and reservoir
nozzle=OvenClass(nozzleCOM)
reservoir=OvenClass(reservoirCOM)
#Read current setpoints, temps, and iD numbers. Set reservoir newsetpoint for later reference
nozzle.read_setpoint()
nozzle.read_temperature()
nozzle.read_iD()
reservoir.read_setpoint()
reservoir.read_temperature()
reservoir.read_iD()
newReservoirSetpoint=reservoir.setpoint
#First step is always to check that the com ports are right so that the nozzle and reservoir aren't mixed!
if nozzle.iD != nozzleID or reservoir.iD != reservoirID:
print('COM Ports do not match controllers... BAD!')
raw_input("Press enter to continue...")
#Testing file for oven class and problems!
import serial
import sys #call sys.exit() to exit program, useful for errors
from OvenClass import OvenClass
#Assign com ports and iD's
nozzleCOM='COM2'
resCOM='COM5'
nozzleID=1
reservoirID=2
#Assign an oven object to nozzle and reservoir
nozzle=OvenClass(nozzleCOM)
reservoir=OvenClass(resCOM)
#Use the functions to test them
#nozzle.write_setpoint(200)
nozzle.read_temperature()
nozzle.read_setpoint()
nozzle.read_iD()
#reservoir.write_setpoint(100)
reservoir.read_temperature()
reservoir.read_setpoint()
reservoir.read_iD()
print('Nozzle temperature:')
print(nozzle.temperature)
print('Nozzle setpoint:')
#Useful variables
newNozzleSetpoint = -1.0
newReservoirSetpoint = -1.0
maxNozzleTemperature = 575.0
maxReservoirTemperature = 375.0
totalTime = 0
timeInterval = 300 #seconds
#Assign com ports and iD's which are checked
nozzleCOM = 'COM2'
reservoirCOM = 'COM5'
nozzleID = 1
reservoirID = 2
#Assign an oven object to nozzle and reservoir
nozzle = OvenClass(nozzleCOM)
reservoir = OvenClass(reservoirCOM)
#Read current setpoints, temps, and iD numbers. Set reservoir newsetpoint for later reference
nozzle.read_setpoint()
nozzle.read_temperature()
nozzle.read_iD()
reservoir.read_setpoint()
reservoir.read_temperature()
reservoir.read_iD()
newReservoirSetpoint = reservoir.setpoint
#First step is always to check that the com ports are right so that the nozzle and reservoir aren't mixed!
if nozzle.iD != nozzleID or reservoir.iD != reservoirID:
print('COM Ports do not match controllers... BAD!')
raw_input("Press enter to continue...")
#Useful variables
newNozzleSetpoint = -1 #Not currently implemented
newReservoirSetpoint = -1
string = 'none'
error = False
errorMessage = 'None'
#Assign com ports and iD's
nozzleCOM = 'COM2'
reservoirCOM = 'COM5'
nozzleID = 1
reservoirID = 2
#Assign an oven object to nozzle and reservoir
nozzle = OvenClass(nozzleCOM)
reservoir = OvenClass(reservoirCOM)
#Read current setpoints and temperatures, then display
nozzle.read_setpoint()
nozzle.read_temperature()
reservoir.read_setpoint()
reservoir.read_temperature()
#First step is always to check that the com ports are right
if nozzle.iD != nozzleID or reservoir.iD != reservoirID:
print('COM Ports do not match controllers... BAD!')
raw_input("Press enter to continue...")
sys.exit()
#Print current values
#Useful variables
newNozzleSetpoint = -1 #Not currently implemented
newReservoirSetpoint = -1
string = 'none'
error = False
errorMessage = 'None'
#Assign com ports and iD's
nozzleCOM='COM2'
reservoirCOM='COM5'
nozzleID=1
reservoirID=2
#Assign an oven object to nozzle and reservoir
nozzle=OvenClass(nozzleCOM)
reservoir=OvenClass(reservoirCOM)
#Read current setpoints and temperatures, then display
nozzle.read_setpoint()
nozzle.read_temperature()
reservoir.read_setpoint()
reservoir.read_temperature()
#First step is always to check that the com ports are right
if nozzle.iD != nozzleID or reservoir.iD != reservoirID:
print('COM Ports do not match controllers... BAD!')
raw_input("Press enter to continue...")
sys.exit()
