def generatePCB(self, PCB, doc, groupBRD, gruboscPlytki):
doc.addObject('Sketcher::SketchObject', 'PCB_Border')
doc.PCB_Border.Placement = FreeCAD.Placement(FreeCAD.Vector(0.0, 0.0, 0.0), FreeCAD.Rotation(0.0, 0.0, 0.0, 1.0))
#
for i in PCB[0]:
if i[0] == 'Arc': # arc by 3 points
x1 = i[1]
y1 = i[2]
x2 = i[3]
y2 = i[4]
[x3, y3] = self.arcMidPoint([x2, y2], [x1, y1], i[5])
arc = Part.Arc(FreeCAD.Vector(x1, y1, 0.0), FreeCAD.Vector(x3, y3, 0.0), FreeCAD.Vector(x2, y2, 0.0))
doc.PCB_Border.addGeometry(self.Draft2Sketch(arc, doc.PCB_Border))
elif i[0] == 'Arc_2': # arc by center / start angle / stop angle / radius
doc.PCB_Border.addGeometry(Part.ArcOfCircle(Part.Circle(FreeCAD.Vector(i[1], i[2], 0), FreeCAD.Vector(0, 0, 1), i[3]), i[4], i[5]))
elif i[0] == 'Circle':
doc.PCB_Border.addGeometry(Part.Circle(FreeCAD.Vector(i[1], i[2]), FreeCAD.Vector(0, 0, 1), i[3]))
elif i[0] == 'Line':
doc.PCB_Border.addGeometry(Part.Line(FreeCAD.Vector(i[1], i[2], 0), FreeCAD.Vector(i[3], i[4], 0)))
#
#if PCB[1]:
PCBboard = doc.addObject("Part::FeaturePython", "Board")
PCBboardObject(PCBboard)
PCBboard.Thickness = gruboscPlytki
PCBboard.Border = doc.PCB_Border
viewProviderPCBboardObject(PCBboard.ViewObject)
groupBRD.addObject(doc.Board)
FreeCADGui.activeDocument().getObject(PCBboard.Name).ShapeColor = PCBconf.PCB_COLOR
FreeCADGui.activeDocument().PCB_Border.Visibility = False
self.updateView()
def accept(self):
if self.pcbBorder.text() == '' or self.pcbHoles.text() == '':
FreeCAD.Console.PrintWarning("Mandatory field is empty!\n")
elif self.pcbBorder.text() == self.pcbHoles.text():
FreeCAD.Console.PrintWarning("One sketch used two times!\n")
else:
newPartObjectFC = self.createDefaultProject(
FreeCAD.ActiveDocument.Name)
groupBRD = createGroup_PCB()
PCBboard = FreeCAD.ActiveDocument.addObject(
"Part::FeaturePython", "Board")
PCBboardObject(PCBboard)
PCBboard.Parent = newPartObjectFC
PCBboard.Thickness = self.gruboscPlytki.value()
PCBboard.Border = FreeCAD.ActiveDocument.getObject(
self.pcbBorder.text())
PCBboard.Holes = FreeCAD.ActiveDocument.getObject(
self.pcbHoles.text())
viewProviderPCBboardObject(PCBboard.ViewObject)
groupBRD.addObject(FreeCAD.ActiveDocument.Board)
FreeCADGui.activeDocument().getObject(
PCBboard.Name).ShapeColor = self.pcbColor.getColor()
FreeCAD.ActiveDocument.getObject(
self.pcbBorder.text()).ViewObject.Visibility = False
FreeCAD.ActiveDocument.getObject(
self.pcbHoles.text()).ViewObject.Visibility = False
#
PCBboard.purgeTouched()
PCBboard.recompute()
return True
def generatePCB(self, doc):
gruboscPlytki = self.wersjaFormatu.dialogMAIN.gruboscPlytki.value()
#
self.printInfo('\nGenerate board: ')
try:
groupBRD = createGroup_PCB()
#
doc.addObject('Sketcher::SketchObject', 'PCB_Border')
doc.PCB_Border.Placement = FreeCAD.Placement(
FreeCAD.Vector(0.0, 0.0, 0.0),
FreeCAD.Rotation(0.0, 0.0, 0.0, 1.0))
#
self.wersjaFormatu.getPCB(doc.PCB_Border)
#
PCBboard = doc.addObject("Part::FeaturePython", "Board")
PCBboardObject(PCBboard)
PCBboard.Thickness = gruboscPlytki
PCBboard.Border = doc.PCB_Border
viewProviderPCBboardObject(PCBboard.ViewObject)
groupBRD.addObject(doc.Board)
FreeCADGui.activeDocument().getObject(
PCBboard.Name).ShapeColor = PCBconf.PCB_COLOR
FreeCADGui.activeDocument().PCB_Border.Visibility = False
PCBboard.purgeTouched()
self.updateView()
except Exception as e:
self.printInfo(u'{0}'.format(e), 'error')
else:
self.printInfo('done')
def generatePCB(self, PCB, doc, groupBRD, gruboscPlytki):
doc.addObject('Sketcher::SketchObject', 'PCB_Border')
doc.PCB_Border.Placement = FreeCAD.Placement(
FreeCAD.Vector(0.0, 0.0, 0.0),
FreeCAD.Rotation(0.0, 0.0, 0.0, 1.0))
#
for i in PCB[0]:
if i[0] == 'Arc': # arc by 3 points
x1 = i[1]
y1 = i[2]
x2 = i[3]
y2 = i[4]
[x3, y3] = self.arcMidPoint([x2, y2], [x1, y1], i[5])
arc = Part.Arc(FreeCAD.Vector(x1, y1, 0.0),
FreeCAD.Vector(x3, y3, 0.0),
FreeCAD.Vector(x2, y2, 0.0))
doc.PCB_Border.addGeometry(
self.Draft2Sketch(arc, doc.PCB_Border))
elif i[0] == 'Arc_2': # arc by center / start angle / stop angle / radius
doc.PCB_Border.addGeometry(
Part.ArcOfCircle(
Part.Circle(FreeCAD.Vector(i[1], i[2], 0),
FreeCAD.Vector(0, 0, 1), i[3]), i[4],
i[5]))
elif i[0] == 'Circle':
doc.PCB_Border.addGeometry(
Part.Circle(FreeCAD.Vector(i[1], i[2]),
FreeCAD.Vector(0, 0, 1), i[3]))
elif i[0] == 'Line':
doc.PCB_Border.addGeometry(
Part.Line(FreeCAD.Vector(i[1], i[2], 0),
FreeCAD.Vector(i[3], i[4], 0)))
#
#if PCB[1]:
PCBboard = doc.addObject("Part::FeaturePython", "Board")
PCBboardObject(PCBboard)
PCBboard.Thickness = gruboscPlytki
PCBboard.Border = doc.PCB_Border
viewProviderPCBboardObject(PCBboard.ViewObject)
groupBRD.addObject(doc.Board)
FreeCADGui.activeDocument().getObject(
PCBboard.Name).ShapeColor = PCBconf.PCB_COLOR
FreeCADGui.activeDocument().PCB_Border.Visibility = False
self.updateView()
def accept(self):
if self.pcbBorder.text() == '' or self.pcbHoles.text() == '':
FreeCAD.Console.PrintWarning("Mandatory field is empty!\n")
elif self.pcbBorder.text() == self.pcbHoles.text():
FreeCAD.Console.PrintWarning("One sketch used two times!\n")
else:
groupBRD = createGroup_PCB()
PCBboard = FreeCAD.ActiveDocument.addObject("Part::FeaturePython", "Board")
PCBboardObject(PCBboard)
PCBboard.Thickness = self.gruboscPlytki.value()
PCBboard.Border = FreeCAD.ActiveDocument.getObject(self.pcbBorder.text())
PCBboard.Holes = FreeCAD.ActiveDocument.getObject(self.pcbHoles.text())
viewProviderPCBboardObject(PCBboard.ViewObject)
groupBRD.addObject(FreeCAD.ActiveDocument.Board)
FreeCADGui.activeDocument().getObject(PCBboard.Name).ShapeColor = self.pcbColor.getColor()
FreeCAD.ActiveDocument.getObject(self.pcbBorder.text()).ViewObject.Visibility = False
FreeCAD.ActiveDocument.getObject(self.pcbHoles.text()).ViewObject.Visibility = False
return True
