def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
#port = '/dev/serial/by-id/usb-FTDI_USB-RS485_Cable_FTY5BU0H-if00-port0'
port = '/dev/serial/by-id/usb-FTDI_USB-RS485_Cable_FTY3GX3T-if00-port0'
# Set up criterium logger
logger = LoggingCriteriumChecker(
codenames=[CODENAME],
types=['lin'],
criteria=[0.2],
time_outs=[300],
)
# Set up pullsocket
datasocket = DateDataPullSocket('mgw_temp', [CODENAME],
timeouts=4,
port=9000)
datasocket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_omicron',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=[CODENAME])
db_logger.start()
measurement = TcReader(port, datasocket, logger, db_logger)
measurement.start()
def main():
"""Main function"""
pvci = PVCi('/dev/serial/by-id/'
'usb-FTDI_USB-RS485_Cable_FTY3M2GN-if00-port0')
# Start live socket
live_socket = LiveSocket('thetaprobe_pvci', list(CODENAME_TRANSLATION.keys()),
sane_interval=0.5)
live_socket.start()
# Start database saver
database_saver = ContinuousDataSaver(
'dateplots_thetaprobe', credentials.USERNAME,
credentials.PASSWORD, list(CODENAME_TRANSLATION.keys())
)
database_saver.start()
# Set up criterium checker
criterium_checker = LoggingCriteriumChecker(
codenames=list(CODENAME_TRANSLATION.keys()),
types=['log', 'log', 'lin'],
criteria=[0.1, 0.1, 1.0],
)
try:
run(pvci, live_socket, database_saver, criterium_checker)
except KeyboardInterrupt:
pvci.close()
live_socket.stop()
database_saver.stop()
def main():
""" Main function """
devices = ['M11200362H', 'M11200362C', 'M11200362A',
'M11200362E', 'M11200362D', 'M11210022B', 'M11200362G']
ranges = {}
ranges['M11200362H'] = 2.5 # Pressure controller
ranges['M11200362C'] = 10 # Flow1
ranges['M11200362A'] = 10 # Flow2
ranges['M11200362E'] = 5 # Flow3
ranges['M11200362D'] = 5 # Flow4
ranges['M11210022B'] = 10 # Flow5 (NH3 compatible)
ranges['M11200362G'] = 1 # Flow6
flow_control = FlowControl(devices=devices, ranges=ranges,
socket_name='microreactorNG_mfc_control')
flow_control.start()
logger = ValueLogger(flow_control, comp_val=1, comp_type='log', low_comp=0.0001)
logger.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_microreactorNG',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=['microreactorng_pressure_reactor'])
db_logger.start()
time.sleep(5)
while True:
time.sleep(0.25)
value = logger.read_value()
if logger.read_trigged():
print(value)
db_logger.save_point_now('microreactorng_pressure_reactor', value)
logger.clear_trigged()
def main():
""" Main function """
code_names = ['pvd309_temp_dca_cell', 'pvd309_temp_mai_cell']
reader = TemperatureReader()
reader.start()
loggers = {}
loggers[code_names[0]] = ValueLogger(reader, channel=1, comp_val = 0.5, comp_type = 'lin')
loggers[code_names[0]].start()
loggers[code_names[1]] = ValueLogger(reader, channel=2, comp_val = 0.5, comp_type = 'lin')
loggers[code_names[1]].start()
datasocket = DateDataPullSocket('pvd_309_temp', code_names, timeouts=[2.0] * 2, port=9001)
datasocket.start()
livesocket = LiveSocket('pvd_309_temperatures', code_names)
livesocket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_pvd309',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=code_names)
db_logger.start()
time.sleep(5)
while not reader.quit:
time.sleep(0.25)
for name in code_names:
print(reader.ttl)
value = loggers[name].read_value()
datasocket.set_point_now(name, value)
livesocket.set_point_now(name, value)
if loggers[name].read_trigged():
print(name + ': ' + str(value))
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
tempreader = TemperatureReader()
tempreader.daemon = True
tempreader.start()
temp_logger = ValueLogger(tempreader, comp_val=1)
temp_logger.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_chemlab307',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=['chemlab307_muffle_furnace'])
socket = DateDataPullSocket('muffle_furnace',
['chemlab307_muffle_furnace'],
timeouts=[1.0])
socket.start()
livesocket = LiveSocket('muffle_furnace', ['chemlab307_muffle_furnace'])
livesocket.start()
db_logger.start()
time.sleep(5)
while True:
time.sleep(0.25)
value = temp_logger.read_value()
socket.set_point_now('chemlab307_muffle_furnace', value)
livesocket.set_point_now('chemlab307_muffle_furnace', value)
if temp_logger.read_trigged():
print(value)
db_logger.save_point_now('chemlab307_muffle_furnace', value)
temp_logger.clear_trigged()
def main():
""" Main function """
emission_control = EmissionControl()
emission_control.set_bias(38)
emission_control.start()
logger = ValueLogger(emission_control, comp_val=0.01, comp_type='log')
logger.start()
codenames = ['tof_emission_value']
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_tof',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
tui = emission_tui.CursesTui(emission_control)
tui.daemon = True
tui.start()
time.sleep(10)
while emission_control.running is True:
time.sleep(1)
value = logger.read_value()
if logger.read_trigged():
LOGGER.debug('Logged value: ' + str(value))
db_logger.save_point_now('tof_emission_value', value)
logger.clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
ports = dict()
ports[
'Sample'] = '/dev/serial/by-id/usb-FTDI_USB-RS485_Cable_FTY5BU0H-if00-port0'
ports[
'Base'] = '/dev/serial/by-id/usb-FTDI_USB-RS485_Cable_FTY3GX3T-if00-port0'
# Set up criterium logger
logger = LoggingCriteriumChecker(
codenames=[CODENAMES['Base']],
types=['lin'],
criteria=[0.2],
time_outs=[300],
)
# Set up pullsocket
datasocket = DateDataPullSocket('mgw_temp',
list(CODENAMES.values()),
timeouts=4,
port=9000)
datasocket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_omicron',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=[CODENAMES['Base']])
db_logger.start()
measurement = TcReader(ports['Base'],
datasocket,
crit_logger=logger,
db_logger=db_logger,
codename=CODENAMES['Base'])
measurement.start()
sample_logger = TcReader(ports['Sample'],
datasocket,
codename=CODENAMES['Sample'])
sample_logger.start()
time.sleep(5)
string = 'Base: {: >6.4} C, Sample: {: >6.4} C'
while True:
try:
time.sleep(1)
print(
string.format(measurement.temperature,
sample_logger.temperature))
except KeyboardInterrupt:
measurement.stop()
sample_logger.stop()
time.sleep(2)
print('\nTcReaders stopped')
datasocket.stop()
print('Pullsocket stopped\nExiting.')
break
def main():
""" Main function """
codenames = []
for channel in settings.channels.values():
channel['reader'] = SocketReaderClass(channel['host'], channel['port'],
channel['command'])
channel['reader'].start()
channel['logger'] = ValueLogger(channel['reader'], comp_val=channel['comp_value'])
channel['logger'].daemon = True
channel['logger'].start()
codenames.append(channel['codename'])
db_logger = ContinuousDataSaver(continuous_data_table=settings.dateplot_table,
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(2)
everything_ok = True
while everything_ok:
time.sleep(0.25)
for channel in settings.channels.values():
if not channel['reader'].isAlive():
everything_ok = False
value = channel['logger'].read_value()
if channel['logger'].read_trigged():
print(value)
db_logger.save_point_now(channel['codename'], value)
channel['logger'].clear_trigged()
def main():
""" Main function """
devices = ['M13201551A', 'M11200362F', 'M8203814A', 'M8203814B',
'M11200362B', 'M11213502A']
ranges = {}
ranges['M13201551A'] = 5 # Microreactor, pressure controller
ranges['M11200362F'] = 1 # Microreactor, flow 2
ranges['M8203814A'] = 10 # Microreactor, flow 5 (argon calibrated)
ranges['M8203814B'] = 3 # Microreactor, flow 1 (argon calibrated)
flow_control = FlowControl(devices=devices, ranges=ranges, name='microreactor_mfc_control')
flow_control.start()
logger = ValueLogger(flow_control, comp_val=1, comp_type='log', low_comp=0.0001)
logger.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_microreactor',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=['mr_reactor_pressure'])
db_logger.start()
time.sleep(5)
while True:
time.sleep(0.25)
value = logger.read_value()
if logger.read_trigged():
print(value)
db_logger.save_point_now('mr_reactor_pressure', value)
logger.clear_trigged()
def main():
""" Main function """
ports = dict()
ports['Sample'] = '/dev/serial/by-id/usb-FTDI_USB-RS485_Cable_FTY5BU0H-if00-port0'
ports['Base'] = '/dev/serial/by-id/usb-FTDI_USB-RS485_Cable_FTY3GX3T-if00-port0'
# Set up criterium logger
logger = LoggingCriteriumChecker(
codenames=[CODENAMES['Base']],
types=['lin'],
criteria=[0.73],
time_outs=[600],
low_compare_values=[-200],
)
# Set up pullsocket
datasocket = DateDataPullSocket('mgw_temp', list(CODENAMES.values()), timeouts=4, port=9000)
datasocket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_omicron',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=[CODENAMES['Base']])
db_logger.start()
logger1 = LOGGER.getChild('Base_reader')
measurement = TcReader(ports['Base'], datasocket, crit_logger=logger, db_logger=db_logger, codename=CODENAMES['Base'], logger=logger1)
measurement.start()
logger2 = LOGGER.getChild('Sample_reader')
sample_logger = TcReader(ports['Sample'], datasocket, codename=CODENAMES['Sample'], logger=logger2)
sample_logger.start()
time.sleep(2)
string = 'Base: {: <6.4} C, Sample: {: <6.4} C'
while True:
try:
time.sleep(1)
sample = sample_logger.temperature
if sample is None:
sample = '----'
base = measurement.temperature
if base is None:
base = '----'
print(string.format(base, sample))
except ValueError:
print('ValueError')
print(repr(measurement.temperature), type(measurement.temperature))
print(repr(sample_logger.temperature))
except KeyboardInterrupt:
measurement.stop()
sample_logger.stop()
time.sleep(2)
LOGGER.info('\nTcReaders stopped')
datasocket.stop()
LOGGER.info('Pullsocket stopped\nExiting.')
break
def main():
""" Main function """
wp.wiringPiSetup()
datasocket = DateDataPullSocket(
'furnaceroom_controller',
['temperature', 'setpoint', 'dutycycle', 'pid_p', 'pid_i'],
timeouts=999999,
port=9000)
datasocket.start()
pushsocket = DataPushSocket('furnaceroom_push_control',
action='store_last')
pushsocket.start()
power_calculator = PowerCalculatorClass(datasocket, pushsocket)
power_calculator.daemon = True
power_calculator.start()
codenames = [
'fr307_furnace_1_dutycycle', 'fr307_furnace_1_S',
'fr307_furnace_1_pid_p', 'fr307_furnace_1_pid_i'
]
db_logger = ContinuousDataSaver(
continuous_data_table='dateplots_furnaceroom307',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
# Criterium checker
criterium_checker = LoggingCriteriumChecker(
codenames=codenames,
types=['lin'] * len(codenames),
criteria=[0.1, 0.99, 1., 1.],
time_outs=[60, 600, 300, 300],
)
heater = HeaterClass(power_calculator, datasocket, db_logger,
criterium_checker)
heater.start()
tui = CursesTui(heater)
tui.daemon = True
tui.start()
# make sure tui close down properly and the T setpoint is put low.
try:
while not heater.quit:
time.sleep(1)
except KeyboardInterrupt:
print("Keyboard Interrupt detected, closing program")
heater.quit = True
finally:
power_calculator.quit = True
time.sleep(0.1)
tui.stop()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
port = 'usb-FTDI_USB-RS232_Cable_FTV9UVIO-if00-port0'
omega = omegabus.OmegaBus(device='/dev/serial/by-id/' + port, model='D5251', baud=300)
hih_instance = honeywell_6000.HIH6130()
reader = Reader(omega, hih_instance)
reader.start()
time.sleep(2.5)
codenames = ['b307_049_h2_pressure', 'b307_049_temperature', 'b307_049_humidity']
loggers = {}
loggers[codenames[0]] = ValueLogger(reader, comp_val=0.1, maximumtime=600,
comp_type='lin', channel=0)
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(reader, comp_val=0.2, maximumtime=600,
comp_type='lin', channel=1)
loggers[codenames[1]].start()
loggers[codenames[2]] = ValueLogger(reader, comp_val=0.5, maximumtime=600,
comp_type='lin', channel=2)
loggers[codenames[2]].start()
livesocket = LiveSocket('307_049 Logger', codenames)
livesocket.start()
socket = DateDataPullSocket('307_049 logger', codenames,
timeouts=[1.0] * len(loggers))
socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_b307_049',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while reader.isAlive():
time.sleep(1)
for name in codenames:
value = loggers[name].read_value()
livesocket.set_point_now(name, value)
socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(name + ': ' + str(value))
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
l3g4200d_instance = l3g4200d.L3G4200D()
l3g4200d_reader = Reader(l3g4200d_instance)
l3g4200d_reader.start()
ais328dq_instance = ais328dq.AIS328DQTR()
ais328dq_reader = Reader(ais328dq_instance)
ais328dq_reader.start()
time.sleep(2.5)
codenames = ['b307_049_vibration_measurement', 'b307_049_vibration_measurement_accl']
loggers = {}
loggers[codenames[0]] = ValueLogger(l3g4200d_reader, comp_val=0.02, maximumtime=600,
comp_type='lin', channel=0)
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(ais328dq_reader, comp_val=0.01, maximumtime=100,
comp_type='lin', channel=0)
loggers[codenames[1]].start()
livesocket = LiveSocket('307 Vibraton logger', codenames)
livesocket.start()
socket = DateDataPullSocket('307 vibration logger', codenames,
timeouts=[1.0] * len(loggers))
socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_b307_049',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while l3g4200d_reader.isAlive():
time.sleep(10)
for name in codenames:
value = loggers[name].read_value()
print(value)
livesocket.set_point_now(name, value)
socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(name + ': ' + str(value))
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
pumpreaders = {}
loggers = {}
channels = ['temperature', 'controller_temperature', 'run_hours', 'rotational_speed',
'controller_run_hours', 'time_to_service']
codenames = []
for port, codename in settings.channels.items():
pumpreaders[port] = PumpReader(port)
pumpreaders[port].daemon = True
pumpreaders[port].start()
pumpreaders[port].loggers = {}
for channel in channels:
codenames.append(codename + '_' + channel) # Build the list of codenames
loggers[port + channel] = ValueLogger(pumpreaders[port], comp_val=0.9,
channel=channel, maximumtime=600)
loggers[port + channel].start()
#socket = DateDataPullSocket('Pump Reader', codenames, timeouts=2.0)
#socket.start()
#live_socket = LiveSocket('Pump Reader', codenames)
#live_socket.start()
db_logger = ContinuousDataSaver(continuous_data_table=settings.table,
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames) # Codename list created
# along with loggers
db_logger.start()
time.sleep(10)
alive = True
while alive:
for port, base_codename in settings.channels.items():
time.sleep(10)
for channel in channels:
if loggers[port + channel].is_alive is False:
alive = False
codename = base_codename + '_' + channel
value = loggers[port + channel].read_value()
#socket.set_point_now(codename, value)
#live_socket.set_point_now(codename, value)
if loggers[port + channel].read_trigged():
print(port + channel + ': ' + str(value))
db_logger.save_point_now(codename, value)
loggers[port + channel].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
ports = '/dev/serial/by-id/'
ports += 'usb-Prolific_Technology_Inc._USB-Serial_Controller_D-if00-port0'
xgs_instance = xgs600.XGS600Driver(ports)
print(xgs_instance.read_all_pressures())
pressure = PressureReader(xgs_instance)
pressure.start()
time.sleep(2.5)
codenames = ['ps_qms_pressure', 'ps_chamber_pressure']
loggers = {}
loggers[codenames[0]] = ValueLogger(pressure, comp_val=0.1, low_comp=1e-11,
comp_type='log', channel=0)
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(pressure, comp_val=0.1, low_comp=1e-11,
comp_type='log', channel=1)
loggers[codenames[1]].start()
#livesocket = LiveSocket('PS', codenames, 2)
#livesocket.start()
socket = DateDataPullSocket('PS pressure logger',
codenames, timeouts=2 * [1.0], port=9001)
socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_ps',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while pressure.isAlive():
time.sleep(0.5)
for name in codenames:
value = loggers[name].read_value()
#livesocket.set_point_now(name, value)
socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
ports = dict()
ports['Sample'] = '/dev/serial/by-id/usb-FTDI_USB-RS485_Cable_FTY5BU0H-if00-port0'
ports['Base'] = '/dev/serial/by-id/usb-FTDI_USB-RS485_Cable_FTY3GX3T-if00-port0'
# Set up criterium logger
logger = LoggingCriteriumChecker(
codenames=[CODENAMES['Base']],
types=['lin'],
criteria=[0.2],
time_outs=[300],
)
# Set up pullsocket
datasocket = DateDataPullSocket('mgw_temp', list(CODENAMES.values()), timeouts=4, port=9000)
datasocket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_omicron',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=[CODENAMES['Base']])
db_logger.start()
measurement = TcReader(ports['Base'], datasocket, crit_logger=logger, db_logger=db_logger, codename=CODENAMES['Base'])
measurement.start()
sample_logger = TcReader(ports['Sample'], datasocket, codename=CODENAMES['Sample'])
sample_logger.start()
time.sleep(5)
string = 'Base: {: >6.4} C, Sample: {: >6.4} C'
while True:
try:
time.sleep(1)
print(string.format(measurement.temperature, sample_logger.temperature))
except KeyboardInterrupt:
measurement.stop()
sample_logger.stop()
time.sleep(2)
print('\nTcReaders stopped')
datasocket.stop()
print('Pullsocket stopped\nExiting.')
break
def test_enqueue_point(self):
"""Test the continous logger by sending data with timestamps"""
# Make timestamps to use
number_of_points = 10
start = time.time()
times = [start + increment for increment in range(number_of_points)]
# Form the lists for local storage of data, for tests
data1 = []
data2 = []
# Init the db_saver
db_saver = ContinuousDataSaver('dateplots_dummy', 'dummy', 'dummy',
['dummy_sine_one', 'dummy_sine_two'])
db_saver.start()
# Save the points
for now in times:
value = math.sin(now)
data1.append([now, value])
db_saver.save_point('dummy_sine_one', (now, value))
value = math.sin(now + math.pi)
data2.append([now, value])
db_saver.save_point('dummy_sine_two', (now, value))
# Make sure the queue has been cleared
while db_saver.sql_saver.queue.qsize() > 0:
time.sleep(0.01)
# Get the measurement code numbers from the logger
codes = (db_saver.codename_translation['dummy_sine_one'],
db_saver.codename_translation['dummy_sine_two'])
# Check if the data has been properly written to the db
for data, code in zip((data1, data2), codes):
query = 'SELECT UNIX_TIMESTAMP(time), value FROM dateplots_dummy '\
'WHERE type={} ORDER BY id DESC LIMIT {}'\
.format(code, number_of_points)
CURSOR.execute(query)
fetched = reversed(CURSOR.fetchall())
for point_original, point_control in zip(data, fetched):
# Time is rounded, so it is only correct to within ~0.51 s
assert np.isclose(point_original[0],
point_control[0],
atol=0.51)
assert np.isclose(point_original[1], point_control[1])
db_saver.stop()
def main():
""" Main function """
ups = galaxy_3500.Galaxy3500('b312-ups')
reader = UpsReader(ups)
reader.daemon = True
reader.start()
time.sleep(5)
codenames = ['b312_ups_temperature', 'b312_ups_kVAPh1', 'b312_ups_kVAPh2',
'b312_ups_kVAPh3', 'b312_ups_output_current_Ph1',
'b312_ups_output_current_Ph2', 'b312_ups_output_current_Ph3',
'b312_ups_input_frequency', 'b312_ups_input_voltage_Ph1',
'b312_ups_input_voltage_Ph2', 'b312_ups_input_voltage_Ph3',
'b312_ups_output_voltage_Ph1', 'b312_ups_output_voltage_Ph2',
'b312_ups_output_voltage_Ph3', 'b312_ups_battery_voltage',
'b312_ups_battery_current', 'b312_ups_battery_state_of_charge',
'b312_ups_output_frequency']
loggers = {}
for i in range(0, len(codenames)):
loggers[codenames[i]] = ValueLogger(reader, comp_val=0.1, channel=i)
loggers[codenames[i]].start()
socket = DateDataPullSocket('UPS status', codenames,
timeouts=[5.0] * len(codenames))
socket.start()
live_socket = LiveSocket('UPS Status', codenames)
live_socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_ups_b312',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(5)
while reader.isAlive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
omron_instance = omron_d6fph.OmronD6fph()
hih_instance = honeywell_6000.HIH6130()
reader = Reader(omron_instance, hih_instance)
reader.start()
time.sleep(5)
codenames = ['hall_ventilation_pressure', 'hall_temperature', 'hall_humidity']
loggers = {}
loggers[codenames[0]] = ValueLogger(reader, comp_val=1.0, maximumtime=300,
comp_type='lin', channel=0)
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(reader, comp_val=0.2, maximumtime=600,
comp_type='lin', channel=1)
loggers[codenames[1]].start()
loggers[codenames[2]] = ValueLogger(reader, comp_val=0.2, maximumtime=600,
comp_type='lin', channel=2)
loggers[codenames[2]].start()
livesocket = LiveSocket('Hall Ventilation Logger', codenames)
livesocket.start()
socket = DateDataPullSocket('Hall Ventilation logger', codenames,
timeouts=[1.0] * len(loggers))
socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_hall',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while reader.isAlive():
time.sleep(1)
for name in codenames:
value = loggers[name].read_value()
livesocket.set_point_now(name, value)
socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(name + ': ' + str(value))
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
port = '/dev/ttyUSB0'
codenames = ['pressure', 'state']
socket_name = MICRO + '-reactorANH_xgs600_pressure_control'
setpoint_channel_userlabel_on_off = {
'T1': [1, 'NGBUF', '1.333E-04', '2.000E+00'],
'T2': [2, 'IGMC', '1.000E-11', '1.000E-05'],
'T3': [3, 'NGBUF', '1.333E-04', '1.000E+00'],
}
user_labels = ['IGMC', 'CNV1', 'CNV2', 'CNV3', 'NGBUF', 'OLDBF', 'MAIN']
db_saver = ContinuousDataSaver(
continuous_data_table='dateplots_microreactorNG',
username=credentials.username,
password=credentials.password,
measurement_codenames=\
['microreactorng_valve_'+valve_names for valve_names \
in list(setpoint_channel_userlabel_on_off.keys())],
)
pressure_control = XGS600Control(
port=port,
socket_name=socket_name,
codenames=codenames,
user_labels=user_labels,
valve_properties=setpoint_channel_userlabel_on_off,
db_saver=db_saver,
)
pressure_control.start()
time.sleep(1)
while pressure_control.isAlive():
time.sleep(0.25)
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
qcm_port = ('/dev/serial/by-id/' +
'usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0')
qcm = inficon.InficonSQM160(qcm_port)
reader = QcmReader(qcm)
reader.daemon = True
reader.start()
codenames = ['volvo_qcm_frequency',
'volvo_qcm_crystal_life',
'volvo_qcm_thickness']
loggers = {}
loggers[codenames[0]] = ValueLogger(reader, comp_val=0.1, channel=0)
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(reader, comp_val=0.01, channel=1)
loggers[codenames[1]].start()
loggers[codenames[2]] = ValueLogger(reader, comp_val=0.001, channel=2)
loggers[codenames[2]].start()
socket = DateDataPullSocket('Volvo QCM', codenames, port=9000,
timeouts=[5.0] * len(codenames))
socket.start()
livesocket = LiveSocket('Volvo data logger', codenames)
livesocket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_volvo',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(5)
while reader.isAlive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
livesocket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
"""Main function"""
chiller_port = '/dev/serial/by-id/'
chiller_port += 'usb-1a86_USB2.0-Ser_-if00-port0'
LOG.info('Using chiller port %s', chiller_port)
reader = ChillerReader(chiller_port)
reader.start()
LOG.info('ChillerReader started')
codenames = ['uhv_sputterchamber_chiller_temperature',
'uhv_sputterchamber_chiller_flow',
'uhv_sputterchamber_chiller_temperature_ambient',
'uhv_sputterchamber_chiller_pressure',
'uhv_sputterchamber_chiller_temperature_setpoint']
LOG.debug('Using codenames %s', codenames)
loggers = {}
for i in range(0, len(codenames)):
loggers[codenames[i]] = ValueLogger(reader, comp_val=0.11, channel=i)
loggers[codenames[i]].start()
live_socket_name = 'uhv_sputterchamber'
live_socket = LiveSocket(live_socket_name, codenames)
live_socket.start()
LOG.info('Live socket init and started with name "%s"', live_socket_name)
db_table = 'dateplots_uhv_sputterchamber'
db_logger = ContinuousDataSaver(continuous_data_table=db_table,
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
LOG.info('ContinuousLogger init and started on table "%s"', db_table)
time.sleep(5)
while reader.isAlive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
if not math.isnan(value):
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
LOG.debug('Log value %s for codename "%s"', value, name)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main code """
#mux_instance = agilent_34972A.Agilent34972ADriver(interface='lan', hostname='volvo-agilent-34972a')
port = '/dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0'
xgs_instance = xgs600.XGS600Driver(port)
#analog_measurement = MuxReader(mux_instance)
#analog_measurement.start()
pressure = PressureReader(xgs_instance)
print('-')
pressure.start()
time.sleep(2.5)
#codenames = ['volvo_pressure', 'volvo_temperature']
codenames = ['volvo_pressure']
loggers = {}
loggers[codenames[0]] = ValueLogger(pressure, comp_val=0.1, comp_type='log', low_comp=1e-9)
loggers[codenames[0]].start()
#loggers[codenames[1]] = ValueLogger(analog_measurement, comp_val=0.5, comp_type='lin')
#loggers[codenames[1]].start()
socket = DateDataPullSocket('Volvo data logger', codenames, timeouts=1.0)
socket.start()
livesocket = LiveSocket('Volvo data logger', codenames)
livesocket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_volvo',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
#while pressure.isAlive() and analog_measurement.isAlive():
while True:
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
livesocket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
"""The main function"""
# Setup logger and live socket
codenames = [
'work_estimate', 'work_left', 'work_left_minus_started',
'work_completed', 'work_total'
]
logger = ContinuousDataSaver(
'dateplots_hall',
credentials_hall.username,
credentials_hall.password,
codenames
)
logger.start()
livesocket = LiveSocket('workday', codenames)
livesocket.start()
try:
while True:
# Get board status
card_counts, times, high_scores = get_board_status()
print('Card counts')
pprint(card_counts)
print('\nTimes')
pprint(times)
print('\nHigh Scores')
pprint(high_scores)
# format highscore
highscore_str = 'High Score\n----------'
if high_scores:
largest_name = max(len(name) for name, value in high_scores)
for name, value in high_scores:
highscore_str += '\n{{: <{}}}: {{:.2f}}'.format(largest_name).format(name, value)
# Total work 80 and 10 people
total_work = 66.33
estimate = max(total_work - since_9am() * 10, 0)
batch = {
'work_estimate': estimate,
'work_left': times['ToDo'] + times['In Progress'],
'work_left_minus_started': times['ToDo'],
'work_completed': times['Done'],
'work_total': sum(times.values()),
'work_highscore': highscore_str,
}
# Send to live socket and database
print('\n##########\nbatch')
pprint(batch)
livesocket.set_batch_now(batch)
batch.pop('work_highscore')
for codename, value in batch.items():
logger.save_point_now(codename, value)
print('Sent', datetime.datetime.now())
sleep(600)
except KeyboardInterrupt:
livesocket.stop()
logger.stop()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
hih_instance = honeywell_6000.HIH6130()
reader = Reader(hih_instance)
reader.daemon = True
reader.start()
time.sleep(5)
codenames = ['chemlab312_temperature', 'chemlab312_humidity']
loggers = {}
loggers[codenames[0]] = ValueLogger(reader, comp_val=0.2, comp_type='lin', channel=1)
loggers[codenames[0]].daemon = True
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(reader, comp_val=0.2, comp_type='lin', channel=2)
loggers[codenames[1]].daemon = True
loggers[codenames[1]].start()
livesocket = LiveSocket('Chemlab312 Air Logger', codenames)
livesocket.start()
socket = DateDataPullSocket('Chemlab312 Air Logger', codenames,
timeouts=[1.0] * len(loggers))
socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_chemlab312',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while reader.isAlive():
time.sleep(0.5)
for name in codenames:
value = loggers[name].read_value()
livesocket.set_point_now(name, value)
socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
codenames = []
for channel in settings.channels.values():
channel['reader'] = SocketReaderClass(channel['host'], channel['port'],
channel['command'])
channel['reader'].start()
channel['logger'] = ValueLogger(channel['reader'], comp_val=channel['comp_value'])
channel['logger'].daemon = True
channel['logger'].start()
codenames.append(channel['codename'])
try:
port = settings.port_number
except AttributeError:
port = 9000
pullsocket = DateDataPullSocket(settings.user + '-socket_logger',
codenames, timeouts=5, port=port)
pullsocket.start()
db_logger = ContinuousDataSaver(continuous_data_table=settings.dateplot_table,
username=settings.user,
password=settings.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(2)
everything_ok = True
while everything_ok:
time.sleep(0.25)
for channel in settings.channels.values():
if not channel['reader'].isAlive():
everything_ok = False
# Report error here!!!
# Consider to keep program running even in case of
# socket failures
value = channel['logger'].read_value()
pullsocket.set_point_now(channel['codename'], value)
if channel['logger'].read_trigged():
print(value)
db_logger.save_point_now(channel['codename'], value)
channel['logger'].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
port = '/dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller_D-if00-port'
port = '/dev/ttyUSB0'
codenames = ['xrd_pressure_turbo_gas_system', 'xrd_pressure_gas_system_wrg',
'xrd_pressure_mass_spec_wrg', 'xrd_pressure_gas_system_baratron']
reader = PressureReader(port)
reader.daemon = True
reader.start()
loggers = {}
loggers[codenames[0]] = ValueLogger(reader, comp_val=0.02, comp_type='log', channel=1)
loggers[codenames[1]] = ValueLogger(reader, comp_val=0.02, comp_type='log', channel=2)
loggers[codenames[2]] = ValueLogger(reader, comp_val=0.02, comp_type='log', channel=3)
loggers[codenames[3]] = ValueLogger(reader, comp_val=2, comp_type='lin', channel=4)
for i in range(0, 4):
loggers[codenames[i]].start()
socket = DateDataPullSocket('XRD Pressure', codenames, timeouts=[2.0] * len(codenames))
socket.start()
live_socket = LiveSocket('XRD pressure', codenames, 2)
live_socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_xrd',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(5)
while True:
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(name + ': ' + str(value))
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc_instance = DeltaSigma(bus, 0x68, 0x69, 18)
tempreader = TemperatureReader(adc_instance)
tempreader.daemon = True
tempreader.start()
codenames = ["cooling_water_hot", "cooling_water_cold"]
loggers = {}
for i in range(0, 2):
loggers[codenames[i]] = ValueLogger(tempreader, comp_val=0.5, channel=i)
loggers[codenames[i]].start()
socket = DateDataPullSocket("hall_cooling_water_temp", codenames, timeouts=2.0)
socket.start()
live_socket = LiveSocket("hall_waterpressure", codenames)
live_socket.start()
db_logger = ContinuousDataSaver(
continuous_data_table="dateplots_hall",
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames,
)
db_logger.start()
time.sleep(5)
while tempreader.is_alive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc_instance = ADCPi(bus, 0x68, 0x69, 18)
pressurereader = PressureReader(adc_instance)
pressurereader.daemon = True
pressurereader.start()
codenames = ["chemlab312_sample_storage_pressure"]
loggers = {}
for i in range(0, 1):
loggers[codenames[i]] = ValueLogger(pressurereader, comp_val=0.05, comp_type="log")
loggers[codenames[i]].start()
socket = DateDataPullSocket("chemlab312_sample_storage", codenames, timeouts=[2.0])
socket.start()
live_socket = LiveSocket("chemlab312_sample_storage", codenames)
live_socket.start()
db_logger = ContinuousDataSaver(
continuous_data_table="dateplots_chemlab312",
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames,
)
db_logger.start()
time.sleep(5)
while True:
time.sleep(0.5)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
port = 'usb-FTDI_USB-RS232_Cable_FTWZKOU0-if00-port0'
omega = omegabus.OmegaBus(device='/dev/serial/by-id/' + port, model='D5251', baud=300)
reader = Reader(omega)
reader.start()
time.sleep(2.5)
codenames = ['propene_ox_setup_abs_pressure']
loggers = {}
loggers[codenames[0]] = ValueLogger(reader, comp_val=5, maximumtime=300,
comp_type='lin')
loggers[codenames[0]].start()
livesocket = LiveSocket('propene_ox Logger', codenames)
livesocket.start()
socket = DateDataPullSocket('propene_ox logger', codenames,
timeouts=[3.0] * len(loggers))
socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_propene_ox',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while reader.isAlive():
time.sleep(1)
for name in codenames:
value = loggers[name].read_value()
livesocket.set_point_now(name, value)
socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(name + ': ' + str(value))
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
port = 'serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0'
xgs = xgs600.XGS600Driver('/dev/' + port)
print(xgs.read_all_pressures())
reader = PressureReader(xgs)
reader.daemon = True
reader.start()
buffer_logger = ValueLogger(reader, comp_val=0.1, comp_type='log',
channel=0, low_comp=1e-3)
containment_logger = ValueLogger(reader, comp_val=0.1, comp_type='log',
channel=1, low_comp=1e-3)
buffer_logger.start()
containment_logger.start()
socket = DateDataPullSocket('mgw',
['containment_pressure', 'buffer_pressure'],
timeouts=[1.0, 1.0])
socket.start()
livesocket = LiveSocket('mgw', ['containment_pressure', 'buffer_pressure'])
livesocket.start()
codenames = ['mgw_pressure_containment', 'mgw_pressure_buffer']
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_mgw',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(5)
while reader.isAlive():
time.sleep(0.2)
p_containment = containment_logger.read_value()
p_buffer = buffer_logger.read_value()
socket.set_point_now('containment_pressure', p_containment)
socket.set_point_now('buffer_pressure', p_buffer)
livesocket.set_point_now('containment_pressure', p_containment)
livesocket.set_point_now('buffer_pressure', p_buffer)
if containment_logger.read_trigged():
print(p_containment)
db_logger.save_point_now('mgw_pressure_containment', p_containment)
containment_logger.clear_trigged()
if buffer_logger.read_trigged():
print(p_buffer)
db_logger.save_point_now('mgw_pressure_buffer', p_buffer)
buffer_logger.clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
ports = '/dev/ttyUSB0'
xgs_instance = xgs600.XGS600Driver(ports)
print(xgs_instance.read_all_pressures())
pressure = PressureReader(xgs_instance)
pressure.start()
time.sleep(2.5)
codenames = ['tof_iongauge_ft', 'tof_iongauge_main', 'tof_pirani_roughing']
loggers = {}
loggers[codenames[0]] = ValueLogger(pressure, comp_val=0.1,
low_comp=1e-11, comp_type='log', channel=0)
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(pressure, comp_val=0.1, comp_type='log', channel=1)
loggers[codenames[1]].start()
loggers[codenames[2]] = ValueLogger(pressure, comp_val=0.1, comp_type='log', channel=2)
loggers[codenames[2]].start()
livesocket = LiveSocket('TOF data logger', codenames, 2)
livesocket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_tof',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while pressure.isAlive():
time.sleep(0.5)
for name in codenames:
value = loggers[name].read_value()
livesocket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
codenames = ['fr307_furnace_1_T', 'fr307_furnace_2_T']
datasocket = DateDataPullSocket('furnaceroom_reader', codenames,
timeouts=[3.0, 3.0], port=9001)
datasocket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_furnaceroom307',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
ports = {}
ports['fr307_furnace_1_T'] = 'usb-FTDI_USB-RS485_Cable_FTWGRL9C-if00-port0'
ports['fr307_furnace_2_T'] = 'usb-FTDI_USB-RS485_Cable_FTWGRN2W-if00-port0'
loggers = {}
temperature_readers = {}
for logger_name in codenames:
temperature_readers[logger_name] = TemperatureReader(ports[logger_name])
temperature_readers[logger_name].daemon = True
temperature_readers[logger_name].start()
loggers[logger_name] = ValueLogger(temperature_readers[logger_name], comp_val=0.09)
loggers[logger_name].start()
time.sleep(5)
values = {}
while True:
time.sleep(1)
for logger_name in codenames:
values[logger_name] = loggers[logger_name].read_value()
datasocket.set_point_now(logger_name, values[logger_name])
if loggers[logger_name].read_trigged():
print(logger_name + ': ' + str(values[logger_name]))
db_logger.save_point_now(logger_name, values[logger_name])
loggers[logger_name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc_instance = DeltaSigma(bus, 0x68, 0x69, 18)
pressurereader = PressureReader(adc_instance)
pressurereader.daemon = True
pressurereader.start()
codenames = ['mr_iongauge_pressure']
logger = ValueLogger(pressurereader, comp_val=0.5)
logger.start()
socket = DateDataPullSocket('Microreactor Ion Gauge', codenames, timeouts=[1.0])
socket.start()
live_socket = LiveSocket('Microreactor Ion Gauge', codenames)
live_socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_microreactor',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(2)
while True:
time.sleep(0.25)
value = logger.read_value()
socket.set_point_now(codenames[0], value)
live_socket.set_point_now(codenames[0], value)
if logger.read_trigged():
print(value)
db_logger.save_point_now(codenames[0], value)
logger.clear_trigged()
def main():
""" Main function """
emission_control = EmissionControl()
emission_control.set_bias(28)
emission_control.start()
logger = ValueLogger(emission_control, comp_val=0.01, comp_type='log')
logger.start()
codenames = ['tof_emission_value']
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_tof',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
tui = emission_tui.CursesTui(emission_control)
tui.daemon = True
tui.start()
time.sleep(10)
while emission_control.running is True:
time.sleep(1)
value = logger.read_value()
if logger.read_trigged():
LOGGER.debug('Logged value: %s', value)
db_logger.save_point_now('tof_emission_value', value)
logger.clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
port = '/dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller_D-if00-port'
port = '/dev/ttyUSB0'
codenames = [
'xrd_pressure_turbo_gas_system', 'xrd_pressure_gas_system_wrg',
'xrd_pressure_mass_spec_wrg', 'xrd_pressure_gas_system_baratron'
]
reader = PressureReader(port)
reader.daemon = True
reader.start()
loggers = {}
loggers[codenames[0]] = ValueLogger(reader,
comp_val=0.02,
comp_type='log',
channel=1)
loggers[codenames[1]] = ValueLogger(reader,
comp_val=0.02,
comp_type='log',
channel=2)
loggers[codenames[2]] = ValueLogger(reader,
comp_val=0.02,
comp_type='log',
channel=3)
loggers[codenames[3]] = ValueLogger(reader,
comp_val=2,
comp_type='lin',
channel=4)
for i in range(0, 4):
loggers[codenames[i]].start()
socket = DateDataPullSocket('XRD Pressure',
codenames,
timeouts=[2.0] * len(codenames))
socket.start()
live_socket = LiveSocket('XRD pressure', codenames, 2)
live_socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_xrd',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(5)
while True:
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(name + ': ' + str(value))
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
codenames = ['sniffer_inlet_gas_pressure']
mfc = AnalogMFC(1, 10, 5)
mfcs = {}
mfcs[codenames[0]] = mfc
flow_control = FlowControl(mfcs, 'sniffer')
flow_control.start()
loggers = {}
loggers[codenames[0]] = ValueLogger(flow_control, comp_val=0.02, comp_type='lin',
low_comp=0.01, channel=codenames[0])
loggers[codenames[0]].start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_sniffer',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while True:
time.sleep(0.5)
for name in codenames:
if loggers[name].read_trigged():
print(name + ': ' + str(loggers[name].value))
db_logger.save_point_now(name, loggers[name].value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
omron_instance = omron_d6fph.OmronD6fph()
hih_instance = honeywell_6000.HIH6130()
reader = Reader(omron_instance, hih_instance)
reader.start()
time.sleep(5)
codenames = [
'hall_ventilation_pressure', 'hall_temperature', 'hall_humidity'
]
loggers = {}
loggers[codenames[0]] = ValueLogger(reader,
comp_val=1.0,
maximumtime=300,
comp_type='lin',
channel=0)
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(reader,
comp_val=0.2,
maximumtime=600,
comp_type='lin',
channel=1)
loggers[codenames[1]].start()
loggers[codenames[2]] = ValueLogger(reader,
comp_val=0.2,
maximumtime=600,
comp_type='lin',
channel=2)
loggers[codenames[2]].start()
livesocket = LiveSocket('Hall Ventilation Logger', codenames)
livesocket.start()
socket = DateDataPullSocket('Hall Ventilation logger',
codenames,
timeouts=[1.0] * len(loggers))
socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_hall',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while reader.isAlive():
time.sleep(1)
for name in codenames:
value = loggers[name].read_value()
livesocket.set_point_now(name, value)
socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(name + ': ' + str(value))
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
"""Main function"""
pvci = PVCi('/dev/serial/by-id/'
'usb-FTDI_USB-RS485_Cable_FTY3M2GN-if00-port0')
# Start live socket
live_socket = LiveSocket(
'thetaprobe_pvci',
list(CODENAME_TRANSLATION.keys()) + list(EXTRA_LIVE.keys()),
)
live_socket.start()
# Start database saver
database_saver = ContinuousDataSaver('dateplots_thetaprobe',
credentials.USERNAME,
credentials.PASSWORD,
list(CODENAME_TRANSLATION.keys()))
database_saver.start()
# Set up criterium checker
criterium_checker = LoggingCriteriumChecker(
codenames=list(CODENAME_TRANSLATION.keys()),
types=['log', 'log', 'lin'],
criteria=[0.1, 0.1, 1.0],
)
try:
run(pvci, live_socket, database_saver, criterium_checker)
except KeyboardInterrupt:
pvci.close()
live_socket.stop()
database_saver.stop()
def main():
""" Main function """
tempreader = TemperatureReader()
tempreader.daemon = True
tempreader.start()
temp_logger = ValueLogger(tempreader, comp_val=1)
temp_logger.start()
db_logger = ContinuousDataSaver(
continuous_data_table='dateplots_chemlab307',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=['chemlab307_muffle_furnace'])
socket = DateDataPullSocket('muffle_furnace',
['chemlab307_muffle_furnace'],
timeouts=[1.0])
socket.start()
livesocket = LiveSocket('muffle_furnace', ['chemlab307_muffle_furnace'])
livesocket.start()
db_logger.start()
time.sleep(5)
while True:
time.sleep(0.25)
value = temp_logger.read_value()
socket.set_point_now('chemlab307_muffle_furnace', value)
livesocket.set_point_now('chemlab307_muffle_furnace', value)
if temp_logger.read_trigged():
print(value)
db_logger.save_point_now('chemlab307_muffle_furnace', value)
temp_logger.clear_trigged()
def test_enqueue_point(self):
"""Test the continous logger by sending data with timestamps"""
# Make timestamps to use
number_of_points = 10
start = time.time()
times = [start + increment for increment in range(number_of_points)]
# Form the lists for local storage of data, for tests
data1 = []
data2 = []
# Init the db_saver
db_saver = ContinuousDataSaver("dateplots_dummy", "dummy", "dummy", ["dummy_sine_one", "dummy_sine_two"])
db_saver.start()
# Save the points
for now in times:
value = math.sin(now)
data1.append([now, value])
db_saver.save_point("dummy_sine_one", (now, value))
value = math.sin(now + math.pi)
data2.append([now, value])
db_saver.save_point("dummy_sine_two", (now, value))
# Make sure the queue has been cleared
while db_saver.sql_saver.queue.qsize() > 0:
time.sleep(0.01)
# Get the measurement code numbers from the logger
codes = (db_saver.codename_translation["dummy_sine_one"], db_saver.codename_translation["dummy_sine_two"])
# Check if the data has been properly written to the db
for data, code in zip((data1, data2), codes):
query = (
"SELECT UNIX_TIMESTAMP(time), value FROM dateplots_dummy "
"WHERE type={} ORDER BY id DESC LIMIT {}".format(code, number_of_points)
)
CURSOR.execute(query)
fetched = reversed(CURSOR.fetchall())
for point_original, point_control in zip(data, fetched):
# Time is rounded, so it is only correct to within ~0.51 s
assert np.isclose(point_original[0], point_control[0], atol=0.51)
assert np.isclose(point_original[1], point_control[1])
db_saver.stop()
def main():
""" Main loop """
mainpump = tp.TurboDriver(adress=1, port=settings.port)
mainpump.start()
tui = tp.CursesTui(mainpump)
tui.daemon = True
tui.start()
reader = tp.TurboReader(mainpump)
reader.daemon = True
reader.start()
time.sleep(10) # Allow reader to make meaningfull moving avarage
codenames = [settings.table_prefix + '_turbo_speed',
settings.table_prefix + '_turbo_power',
settings.table_prefix + '_turbo_current',
settings.table_prefix + '_turbo_temp_motor',
settings.table_prefix + '_turbo_temp_bottom',
settings.table_prefix + '_turbo_temp_bearings',
settings.table_prefix + '_turbo_temp_electronics']
loggers = {}
loggers[codenames[0]] = tp.TurboLogger(reader, 'rotation_speed', maximumtime=600)
loggers[codenames[1]] = tp.TurboLogger(reader, 'drive_power', maximumtime=600)
loggers[codenames[2]] = tp.TurboLogger(reader, 'drive_current', maximumtime=600)
loggers[codenames[3]] = tp.TurboLogger(reader, 'temp_motor', maximumtime=600)
loggers[codenames[4]] = tp.TurboLogger(reader, 'temp_bottom', maximumtime=600)
loggers[codenames[5]] = tp.TurboLogger(reader, 'temp_bearings', maximumtime=600)
loggers[codenames[6]] = tp.TurboLogger(reader, 'temp_electronics', maximumtime=600)
for name in codenames:
loggers[name].daemon = True
loggers[name].start()
livesocket = LiveSocket(settings.name + '-turboreader', codenames)
livesocket.start()
socket = DateDataPullSocket(settings.name + '-turboreader', codenames,
timeouts=[1.0] * len(codenames), port=9000)
socket.start()
db_logger = ContinuousDataSaver(continuous_data_table=settings.table,
username=settings.user,
password=settings.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(5)
while mainpump.running:
time.sleep(0.1)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value) # Notice, this is the averaged value
livesocket.set_point_now(name, value) # Notice, this is the averaged value
if loggers[name].trigged:
db_logger.save_point_now(name, value)
loggers[name].trigged = False
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
l3g4200d_instance = l3g4200d.L3G4200D()
l3g4200d_reader = Reader(l3g4200d_instance)
l3g4200d_reader.start()
ais328dq_instance = ais328dq.AIS328DQTR()
ais328dq_reader = Reader(ais328dq_instance)
ais328dq_reader.start()
time.sleep(2.5)
codenames = [
'b307_049_vibration_measurement', 'b307_049_vibration_measurement_accl'
]
loggers = {}
loggers[codenames[0]] = ValueLogger(l3g4200d_reader,
comp_val=0.02,
maximumtime=600,
comp_type='lin',
channel=0)
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(ais328dq_reader,
comp_val=0.01,
maximumtime=100,
comp_type='lin',
channel=0)
loggers[codenames[1]].start()
livesocket = LiveSocket('307 Vibraton logger', codenames)
livesocket.start()
socket = DateDataPullSocket('307 vibration logger',
codenames,
timeouts=[1.0] * len(loggers))
socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_b307_049',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while l3g4200d_reader.isAlive():
time.sleep(10)
for name in codenames:
value = loggers[name].read_value()
print(value)
livesocket.set_point_now(name, value)
socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(name + ': ' + str(value))
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
pumpreaders = {}
loggers = {}
channels = [
'temperature', 'controller_temperature', 'run_hours',
'rotational_speed', 'controller_run_hours', 'time_to_service'
]
codenames = []
for port, codename in settings.channels.items():
pumpreaders[port] = PumpReader(port)
pumpreaders[port].daemon = True
pumpreaders[port].start()
pumpreaders[port].loggers = {}
for channel in channels:
codenames.append(codename + '_' +
channel) # Build the list of codenames
loggers[port + channel] = ValueLogger(pumpreaders[port],
comp_val=0.9,
channel=channel,
maximumtime=600)
loggers[port + channel].start()
#socket = DateDataPullSocket('Pump Reader', codenames, timeouts=2.0)
#socket.start()
#live_socket = LiveSocket('Pump Reader', codenames)
#live_socket.start()
db_logger = ContinuousDataSaver(
continuous_data_table=settings.table,
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames) # Codename list created
# along with loggers
db_logger.start()
time.sleep(10)
alive = True
while alive:
for port, base_codename in settings.channels.items():
time.sleep(10)
for channel in channels:
if loggers[port + channel].is_alive is False:
alive = False
codename = base_codename + '_' + channel
value = loggers[port + channel].read_value()
#socket.set_point_now(codename, value)
#live_socket.set_point_now(codename, value)
if loggers[port + channel].read_trigged():
print(port + channel + ': ' + str(value))
db_logger.save_point_now(codename, value)
loggers[port + channel].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
ports = '/dev/serial/by-id/'
ports += 'usb-Prolific_Technology_Inc._USB-Serial_Controller_D-if00-port0'
xgs_instance = xgs600.XGS600Driver(ports)
print(xgs_instance.read_all_pressures())
pressure = PressureReader(xgs_instance)
pressure.start()
time.sleep(2.5)
codenames = ['ps_qms_pressure', 'ps_chamber_pressure']
loggers = {}
loggers[codenames[0]] = ValueLogger(pressure,
comp_val=0.1,
low_comp=1e-11,
comp_type='log',
channel=0)
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(pressure,
comp_val=0.1,
low_comp=1e-11,
comp_type='log',
channel=1)
loggers[codenames[1]].start()
#livesocket = LiveSocket('PS', codenames, 2)
#livesocket.start()
socket = DateDataPullSocket('PS pressure logger',
codenames,
timeouts=2 * [1.0],
port=9001)
socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_ps',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while pressure.isAlive():
time.sleep(0.5)
for name in codenames:
value = loggers[name].read_value()
#livesocket.set_point_now(name, value)
socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
"""The main function"""
# Setup logger and live socket
codenames = [
'work_estimate', 'work_left', 'work_left_minus_started',
'work_completed', 'work_total'
]
logger = ContinuousDataSaver('dateplots_hall', credentials_hall.username,
credentials_hall.password, codenames)
logger.start()
try:
while True:
# Get board status
#card_counts, times, high_scores = get_board_status()
card_counts, times = get_board_status()
print('Card counts')
pprint(card_counts)
print('\nTimes')
pprint(times)
# Total work 80 and 14 people
total_work = 66.337
estimate = max(total_work - since_9am() * 14, 0)
batch = {
'work_estimate': estimate,
'work_left': times['ToDo'] + times['In Progress'],
'work_left_minus_started': times['ToDo'],
'work_completed': times['Done'],
'work_total': sum(times.values()),
}
# Send to and database
print('\n##########\nbatch')
#pprint(batch)
for codename, value in batch.items():
#print(codename, value)
logger.save_point_now(codename, value)
print('Sent', datetime.datetime.now())
sleep(120)
except (KeyboardInterrupt, ZeroDivisionError):
print("Done")
logger.stop()
def main():
""" Main function """
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc_instance = ADCPi(bus, 0x68, 0x69, 18)
windreader = WindReader(adc_instance)
windreader.daemon = True
windreader.start()
loggers = {}
for channel, codename in settings.channels.items():
loggers[codename + '_raw'] = ValueLogger(windreader,
comp_val=1.05,
channel=channel + '_raw',
maximumtime=30)
loggers[codename + '_raw'].start()
loggers[codename] = ValueLogger(windreader,
comp_val=1.005,
channel=channel,
maximumtime=30)
loggers[codename].start()
codenames = []
for name in settings.channels.values():
codenames.append(name)
codenames.append(name + '_raw')
socket = DateDataPullSocket('Fumehood Wind Speed', codenames, timeouts=2.0)
socket.start()
live_socket = LiveSocket('Fumehood Wind Speed', codenames)
live_socket.start()
db_logger = ContinuousDataSaver(
continuous_data_table=settings.dateplot_table,
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(10)
while windreader.is_alive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(name + ': ' + str(value))
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main code """
mux_instance = agilent_34972A.Agilent34972ADriver(
interface='lan', hostname='volvo-agilent-34972a')
port = '/dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0'
xgs_instance = xgs600.XGS600Driver(port)
analog_measurement = MuxReader(mux_instance)
analog_measurement.start()
pressure = PressureReader(xgs_instance)
print('-')
pressure.start()
time.sleep(2.5)
codenames = ['volvo_pressure', 'volvo_temperature']
loggers = {}
loggers[codenames[0]] = ValueLogger(pressure,
comp_val=0.1,
comp_type='log')
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(analog_measurement,
comp_val=0.5,
comp_type='lin')
loggers[codenames[1]].start()
socket = DateDataPullSocket('Volvo data logger',
codenames,
timeouts=[1.0, 1.0])
socket.start()
livesocket = LiveSocket('Volvo data logger', codenames)
livesocket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_volvo',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
#while pressure.isAlive() and analog_measurement.isAlive():
while True:
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
livesocket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
ports = '/dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0'
xgs_instance = xgs600.XGS600Driver(ports)
print(xgs_instance.read_all_pressures())
pressure = PressureReader(xgs_instance)
pressure.start()
time.sleep(2.5)
codenames = ['tof_iongauge_ft', 'tof_iongauge_main', 'tof_pirani_roughing']
loggers = {}
loggers[codenames[0]] = ValueLogger(pressure,
comp_val=0.1,
low_comp=1e-11,
comp_type='log',
channel=0)
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(pressure,
low_comp=1e-11,
comp_val=0.1,
comp_type='log',
channel=1)
loggers[codenames[1]].start()
loggers[codenames[2]] = ValueLogger(pressure,
comp_val=0.1,
comp_type='log',
channel=2)
loggers[codenames[2]].start()
livesocket = LiveSocket('TOF data logger', codenames)
livesocket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_tof',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while pressure.isAlive():
time.sleep(0.5)
for name in codenames:
value = loggers[name].read_value()
livesocket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
hih_instance = honeywell_6000.HIH6130()
reader = Reader(hih_instance)
reader.start()
print('wait start 20s')
time.sleep(25)
print('Wait end')
codenames = ['home_temperature_bedroom', 'home_humidity_bedroom']
loggers = {}
loggers[codenames[0]] = ValueLogger(reader,
comp_val=0.25,
comp_type='lin',
channel=1)
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(reader,
comp_val=1.1,
comp_type='lin',
channel=2)
loggers[codenames[1]].start()
#livesocket = LiveSocket('Home Air Logger', codenames)
#livesocket.start()
socket = DateDataPullSocket('Home Air Logger',
codenames,
timeouts=[1.0] * len(loggers))
socket.start()
table = 'dateplots_rued_langgaards_vej'
db_logger = ContinuousDataSaver(continuous_data_table=table,
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while reader.isAlive():
time.sleep(1)
for name in codenames:
value = loggers[name].read_value()
#livesocket.set_point_now(name, value)
socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
ups = galaxy_3500.Galaxy3500('b312-ups')
reader = UpsReader(ups)
reader.daemon = True
reader.start()
time.sleep(5)
codenames = [
'b312_ups_temperature', 'b312_ups_kVAPh1', 'b312_ups_kVAPh2',
'b312_ups_kVAPh3', 'b312_ups_output_current_Ph1',
'b312_ups_output_current_Ph2', 'b312_ups_output_current_Ph3',
'b312_ups_input_frequency', 'b312_ups_input_voltage_Ph1',
'b312_ups_input_voltage_Ph2', 'b312_ups_input_voltage_Ph3',
'b312_ups_output_voltage_Ph1', 'b312_ups_output_voltage_Ph2',
'b312_ups_output_voltage_Ph3', 'b312_ups_battery_voltage',
'b312_ups_battery_current', 'b312_ups_battery_state_of_charge',
'b312_ups_output_frequency'
]
loggers = {}
for i in range(0, len(codenames)):
loggers[codenames[i]] = ValueLogger(reader, comp_val=0.1, channel=i)
loggers[codenames[i]].start()
socket = DateDataPullSocket('UPS status',
codenames,
timeouts=[5.0] * len(codenames))
socket.start()
live_socket = LiveSocket('UPS Status', codenames)
live_socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_ups_b312',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(5)
while reader.isAlive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
hih_instance = honeywell_6000.HIH6130()
reader = Reader(hih_instance)
reader.start()
time.sleep(5)
codenames = ['chemlab312_temperature', 'chemlab312_humidity']
loggers = {}
loggers[codenames[0]] = ValueLogger(reader,
comp_val=1,
comp_type='lin',
channel=1)
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(reader,
comp_val=1,
comp_type='lin',
channel=2)
loggers[codenames[1]].start()
livesocket = LiveSocket('Chemlab312 Air Logger', codenames, 2)
livesocket.start()
socket = DateDataPullSocket('Chemlab312 Air Logger',
codenames,
timeouts=[1.0] * len(loggers))
socket.start()
db_logger = ContinuousDataSaver(
continuous_data_table='dateplots_chemlab312',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while reader.isAlive():
time.sleep(1)
for name in codenames:
value = loggers[name].read_value()
livesocket.set_point_now(name, value)
socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
qcm_port = (
'/dev/serial/by-id/' +
'usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0')
qcm = inficon.InficonSQM160(qcm_port)
reader = QcmReader(qcm)
reader.daemon = True
reader.start()
codenames = [
'volvo_qcm_frequency', 'volvo_qcm_crystal_life', 'volvo_qcm_thickness'
]
loggers = {}
loggers[codenames[0]] = ValueLogger(reader, comp_val=0.1, channel=0)
loggers[codenames[0]].start()
loggers[codenames[1]] = ValueLogger(reader, comp_val=0.01, channel=1)
loggers[codenames[1]].start()
loggers[codenames[2]] = ValueLogger(reader, comp_val=0.001, channel=2)
loggers[codenames[2]].start()
socket = DateDataPullSocket('Volvo QCM',
codenames,
port=9000,
timeouts=[5.0] * len(codenames))
socket.start()
livesocket = LiveSocket('Volvo data logger', codenames)
livesocket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_volvo',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(5)
while reader.isAlive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
livesocket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
"""Main function """
pvci = epimax.PVCi(
'/dev/serial/by-id/'
'usb-FTDI_USB-RS485_Cable_FT0N0UFX-if00-port0',
slave_address=1)
# Start live socket
live_socket = LiveSocket(
'omicron_pvci',
list(CODENAME_TRANSLATION.keys()),
)
live_socket.start()
# Start pull socket
pullsocket = DateDataPullSocket(
'omicron_pvci_pull',
list(CODENAME_TRANSLATION.keys()),
timeouts=2.5,
)
pullsocket.start()
# Start database saver
database_saver = ContinuousDataSaver(
'dateplots_omicron',
credentials.USERNAME,
credentials.PASSWORD,
list(CODENAME_TRANSLATION.keys()),
)
database_saver.start()
# Criterium checker
criterium_checker = LoggingCriteriumChecker(
codenames=list(CODENAME_TRANSLATION.keys()),
types=['log'] * len(CODENAME_TRANSLATION.keys()),
criteria=[0.05] * len(CODENAME_TRANSLATION.keys()),
time_outs=[300] * len(CODENAME_TRANSLATION.keys()),
)
# Main loop
try:
run(pvci, live_socket, pullsocket, database_saver, criterium_checker)
except KeyboardInterrupt:
sleep(WAIT)
pvci.close()
live_socket.stop()
pullsocket.stop()
database_saver.stop()
except:
LOG.exception("Omicron pvci data logger stopped")
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
port = 'usb-FTDI_USB-RS232_Cable_FTWZKOU0-if00-port0'
omega = omegabus.OmegaBus(device='/dev/serial/by-id/' + port,
model='D5251',
baud=300)
reader = Reader(omega)
reader.start()
time.sleep(2.5)
codenames = ['propene_ox_setup_abs_pressure']
loggers = {}
loggers[codenames[0]] = ValueLogger(reader,
comp_val=5,
maximumtime=300,
comp_type='lin')
loggers[codenames[0]].start()
livesocket = LiveSocket('propene_ox Logger', codenames)
livesocket.start()
socket = DateDataPullSocket('propene_ox logger',
codenames,
timeouts=[3.0] * len(loggers))
socket.start()
db_logger = ContinuousDataSaver(
continuous_data_table='dateplots_propene_ox',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
while reader.isAlive():
time.sleep(1)
for name in codenames:
value = loggers[name].read_value()
livesocket.set_point_now(name, value)
socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(name + ': ' + str(value))
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
"""Main function"""
chiller_port = '/dev/serial/by-id/'
chiller_port += 'usb-1a86_USB2.0-Ser_-if00-port0'
LOG.info('Using chiller port %s', chiller_port)
reader = ChillerReader(chiller_port)
reader.start()
LOG.info('ChillerReader started')
codenames = [
'uhv_sputterchamber_chiller_temperature',
'uhv_sputterchamber_chiller_flow',
'uhv_sputterchamber_chiller_temperature_ambient',
'uhv_sputterchamber_chiller_pressure',
'uhv_sputterchamber_chiller_temperature_setpoint'
]
LOG.debug('Using codenames %s', codenames)
loggers = {}
for i in range(0, len(codenames)):
loggers[codenames[i]] = ValueLogger(reader, comp_val=0.11, channel=i)
loggers[codenames[i]].start()
live_socket_name = 'uhv_sputterchamber'
live_socket = LiveSocket(live_socket_name, codenames)
live_socket.start()
LOG.info('Live socket init and started with name "%s"', live_socket_name)
db_table = 'dateplots_uhv_sputterchamber'
db_logger = ContinuousDataSaver(continuous_data_table=db_table,
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
LOG.info('ContinuousLogger init and started on table "%s"', db_table)
time.sleep(5)
while reader.isAlive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
if not math.isnan(value):
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
LOG.debug('Log value %s for codename "%s"', value, name)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc_instance = ADCPi(bus, 0x68, 0x69, 18)
pressurereader = PressureReader(adc_instance)
pressurereader.daemon = True
pressurereader.start()
codenames = ['chemlab312_sample_storage_pressure']
loggers = {}
for i in range(0, 1):
loggers[codenames[i]] = ValueLogger(pressurereader,
comp_val=0.05,
comp_type='log')
loggers[codenames[i]].start()
socket = DateDataPullSocket('chemlab312_sample_storage',
codenames,
timeouts=[2.0])
socket.start()
live_socket = LiveSocket('chemlab312_sample_storage', codenames)
live_socket.start()
db_logger = ContinuousDataSaver(
continuous_data_table='dateplots_chemlab312',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(5)
while True:
time.sleep(0.5)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
logging.basicConfig(filename="logger.txt", level=logging.ERROR)
logging.basicConfig(level=logging.ERROR)
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc_instance = DeltaSigma(bus, 0x68, 0x69, 18)
tempreader = TemperatureReader(adc_instance)
tempreader.daemon = True
tempreader.start()
codenames = ['cooling_water_hot', 'cooling_water_cold']
loggers = {}
for i in range(0, 2):
loggers[codenames[i]] = ValueLogger(tempreader,
comp_val=0.5,
channel=i)
loggers[codenames[i]].start()
socket = DateDataPullSocket('hall_cooling_water_temp',
codenames,
timeouts=2.0)
socket.start()
live_socket = LiveSocket('hall_waterpressure', codenames)
live_socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_hall',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(5)
while tempreader.is_alive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
