def connect_to_server(self):
if self.connected or self.listening:
self.connect_pb.setChecked(True)
return
server_ip = str(self.server_ip_text.text())
port = int(str(self.local_port_text.text()))
print("Server IP: ", server_ip)
if server_ip.find('xxx') != -1:
print("bad IP")
QMessageBox.about(
self, 'Bad Server IP', 'Please give a correct Server IP\n'
'IP is ' + server_ip)
self.connect_pb.setChecked(False)
return
else:
self.client_socket = QTcpSocket(self)
print("Connecting to " + server_ip + ":", port)
self.client_socket.connectToHost(server_ip, port)
self.client_socket.waitForConnected(1000)
self.client_socket.readyRead.connect(self.client_read)
if self.client_socket.state() != QTcpSocket.ConnectedState:
QMessageBox.about(
self, 'Connection failed',
'Please check IP address and port number\nIs the server running?'
)
self.connect_pb.setChecked(False)
return
print("Connection established")
self.connect_pb.setText("Connected")
self.client_server_tab.setTabEnabled(0, False)
print("Connecting send button")
self.send_button.clicked.connect(self.send_msg)
self.connected = True
def __init__(self):
super().__init__()
self.targetAddr = '0.0.0.0'
self.targetPort = 0
QSettings.setPath(QSettings.IniFormat, QSettings.UserScope,
QDir.currentPath())
self.settings = QSettings(QSettings.IniFormat, QSettings.UserScope,
'config')
self.readSettings()
self.connectionSettings = ConnectionSettings(self.targetAddr,
self.targetPort, self)
self.connectionSettings.settingsChanged.connect(
self.onConnectionSettingsSettingsChanged)
self.socket = QTcpSocket(self)
self.socket.stateChanged.connect(self.onSocketStateChanged)
self.socket.readyRead.connect(self.onSocketReadyRead)
self.frameLength = 0
self.lastSocketState = QAbstractSocket.UnconnectedState
self.animationTimer = QTimer(self)
self.animationTimer.timeout.connect(self.onAnimationTimerTimeout)
self.animationCounter = 0
self.connectionTimer = QTimer(self)
self.connectionTimer.setSingleShot(True)
self.connectionTimer.timeout.connect(self.onConnectionTimerTimeout)
self.dataExchangeTimer = QTimer(self)
self.dataExchangeTimer.timeout.connect(self.onDataExchangeTimerTimeout)
self.initUI()
self.onConnectionSettingsSettingsChanged(self.targetAddr,
self.targetPort)
self.onSocketStateChanged()
def __init__(self, args):
super().__init__()
self.socket = QTcpSocket()
self.socket.connectToHost('localhost', args.port)
self.socket.readyRead.connect(self.readFromEmotool)
self.setAttribute(QtCore.Qt.WA_DeleteOnClose)
self.setWindowTitle("EmoTool - {}".format(version()))
self.main_widget = QtWidgets.QTabWidget(self)
plot_tab = QtWidgets.QWidget(self.main_widget)
self.main_widget.addTab(plot_tab, "plot")
l = QtWidgets.QVBoxLayout(plot_tab)
self.plot_widget = plot_widget = pg.PlotWidget()
l.addWidget(plot_widget)
self.plot_widget = plot_widget
# TODO - make a menu action, not open by default
c = pg.console.ConsoleWidget(namespace=globals(), text="test console")
self.main_widget.addTab(c, "debug")
self.main_widget.setFocus()
self.setCentralWidget(self.main_widget)
self.statusBar().showMessage("Starting", 2000)
self.ticks = defaultdict(list)
self.vals = defaultdict(list)
self.data_items = defaultdict(pg.PlotDataItem)
self.incoming = b''
self.next_message_size = None
def __init__(self):
self.xsize = 512
self.ysize = 512
self.size = self.xsize * self.ysize
self.freq = 125.0
self.period = 200
self.trgtime = 100
self.trginv = 0
self.shdelay = 1.5
self.shtime = 0.1
self.shinv = 0
self.acqdelay = 10
self.samples = 32
self.pulses = 2
self.idle = True
self.socket = QTcpSocket()
self.socket.connected.connect(self.connected)
self.socket.readyRead.connect(self.read_data)
# self.socket.error.connect(self.display_error)
X, Y = np.meshgrid(np.arange(self.xsize),np.arange(self.ysize))
self.xco = X
self.yco = Y
self.buffer = bytearray(8 * self.xsize*self.ysize)
self.data = np.frombuffer(self.buffer, np.int32)
def __init__(self, ip='127.0.0.1', port=8888):
super().__init__(flags=(Qt.FramelessWindowHint
| Qt.WindowStaysOnTopHint))
print("test: ", Qt.WindowStaysOnTopHint)
print("test: ", (Qt.FramelessWindowHint | Qt.WindowStaysOnTopHint))
self.q_rect = QDesktopWidget().screenGeometry()
self.ip = ip
self.port = int(port)
self.interval = 15
self.fonts_size = 48
self.danmaku_list = list()
self.line_list = [
None for _ in range(
0,
self.q_rect.height() // (self.fonts_size + self.interval))
]
self.brush = MyBrush()
self.timer = QTimer()
self.socket = QTcpSocket(self)
self.set_transparent()
self.init_ui()
self.init_net()
self.set_timer()
def connect(self):
if self.isConnectedToServer:
return True
self.sock = QTcpSocket(self)
host_ip_addr = '192.168.1.150'
port = 8080
self.sock.connectToHost(host_ip_addr, port)
if not self.sock.waitForConnected(2500):
msg = self.sock.errorString()
self.add_message(msg + '\n')
QMessageBox.critical(self, "Error", msg)
return False
self.sock.connected.connect(self.on_socket_connected)
self.sock.disconnected.connect(self.on_socket_disconnected)
self.sock.readyRead.connect(self.on_socket_receive)
self.sock.bytesWritten.connect(self.on_socket_transmit)
self.add_message("Connected to {} on port {}\n".format(host_ip_addr, port))
self.isConnectedToServer = True
self.lineEdit.setEnabled(True)
self.pushButton.setEnabled(True)
return True
def __init__(self):
"""Constructor."""
self.__tcpSocket = QTcpSocket()
self.__name = ""
super().__init__() # Used at the end because it launches the app
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
# Výroba ovládacích prvků
self.connectButton = QPushButton(self, text="Start")
self.connectButton.clicked.connect(self.connect)
self.disconnectButton = QPushButton(self, text="Stop")
self.disconnectButton.clicked.connect(self.disconnect)
# Rozložení ovládacích prvků
self.layout = QVBoxLayout(self)
self.layout.addWidget(self.connectButton)
self.layout.addWidget(self.disconnectButton)
# Příprava TCP socketu
self.socket = QTcpSocket(self)
self.socket.readyRead.connect(self.read)
self.socket.connected.connect(self.connected)
self.readBuffer = bytearray()
self.travellers = {}
# Zobrazení
self.setLayout(self.layout)
self.show()
def run(self):
self.socket = QTcpSocket()
self.myclientid1 = 0
if not self.socket.setSocketDescriptor(self.socketId):
self.error.connect(self.socket.error)
return
self.sinOut1.emit(
str(self.socketId) + "#" +
QDateTime.currentDateTime().toString("yyyy-MM-dd HH:mm:ss")
) #发送信号量 //建立连接
while self.socket.state() == QAbstractSocket.ConnectedState:
if (self.socket.waitForReadyRead(1000 * 60 * 10)
and self.socket.bytesAvailable() > 0):
#waitForReadyRead(1000*60*10)说明，单位为毫秒，时间内等待接收数据，超时为假
mygetdata = self.socket.readAll()
mygetdata = bytes(mygetdata)
#print(mygetdata)
self.sinOut2.emit("get data:" + str(mygetdata)) #client发送来的数据
#分析客户端数据中的ID值
myclientid = self.myanalyseframe(mygetdata)
if myclientid != 0 and myclientid != self.myclientid1:
self.myclientid1 = myclientid
# 利用client数据，标识处TCP连接的对象ID值，指令中的值
self.sinOut1.emit(
str(self.socketId) + "#" +
QDateTime.currentDateTime().toString(
"yyyy-MM-dd HH:mm:ss") + "#" + str(myclientid))
else:
self.senddata(self.socket, 'TCP time out')
self.sinOut3.emit(str(self.socketId)) #超时，线程结束,删除前台listw中的条目
return #超时，线程结束
def __init__(self, sock_type='TCP Client', ip='127.0.0.1', port=2007):
'''打开网络设备，建立连接
## sock_type:
- 'TCP Client'
- 'TCP Server'
- 'UDP'
'''
self.sock_type = sock_type
# self.ip = ip
self.port = port
if sock_type == 'TCP Client':
tcp_client = QTcpSocket()
tcp_client.connectToHost(ip, port)
self.sock = tcp_client
elif sock_type == 'TCP Server':
tcp_server = QTcpServer()
tcp_server.listen(QHostAddress(ip), port)
self.sock = tcp_server
elif sock_type == 'UDP':
udp = QUdpSocket()
udp.bind(QHostAddress(ip), port)
self.sock = udp
else:
print('Unkonw sock_type=%r' % sock_type)
def __init__(self):
super(Client, self).__init__()
self.resize(500, 450)
# 1
self.browser = QTextBrowser(self)
self.edit = QTextEdit(self)
self.splitter = QSplitter(self)
self.splitter.setOrientation(Qt.Vertical)
self.splitter.addWidget(self.browser)
self.splitter.addWidget(self.edit)
self.splitter.setSizes([350, 100])
self.send_btn = QPushButton('Send', self)
self.close_btn = QPushButton('Close', self)
self.h_layout = QHBoxLayout()
self.v_layout = QVBoxLayout()
# 2
self.sock = QTcpSocket(self)
self.sock.connectToHost(QHostAddress.LocalHost, 8080)
self.layout_init()
self.signal_init()
def enterRoom(self):
self.tcpSocket = QTcpSocket(self)
self.tcpSocket.connectToHost(self.serverIP, self.port)
self.tcpSocket.connected.connect(self.slotConnected)
self.tcpSocket.readyRead.connect(self.slotDataReceived)
self.tcpSocket.disconnected.connect(self.slotDisconnected)
self.tcpSocket.error.connect(self.slotErrorOccured)
def __init__(self, parent=None):
super(TcpSocketClient, self).__init__()
self.tcpSocketClient = QTcpSocket(parent)
self.setIsConnected(False)
self.setTcpClientID(0)
self.setPeerFullAddrStr(str())
self.tcpSocketClient.readyRead.connect(self.dataReceived)
self.connectClientDisconnect(self.disConnected)
def __init__(self, argv):
super().__init__(argv)
self.server = QTcpServer(self)
self.server.setMaxPendingConnections(1)
self.server.newConnection.connect(self.onNewConnection)
self.server.listen(QHostAddress.Any, 6666)
self.client = QTcpSocket(self)
self.cap = cv2.VideoCapture(0)
def __init__(self):
super(Scanner, self).__init__()
self.setupUi(self)
# IP address validator
rx = QRegExp('^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$')
self.addrValue.setValidator(QRegExpValidator(rx, self.addrValue))
# state variable
self.idle = True
# number of samples to show on the plot
self.size = 512 * 512
self.freq = 125.0
# buffer and offset for the incoming samples
self.buffer = bytearray(8 * self.size)
self.offset = 0
self.data = np.frombuffer(self.buffer, np.int32)
# create figure
figure = Figure()
figure.set_facecolor('none')
self.axes = figure.add_subplot(111)
self.canvas = FigureCanvas(figure)
self.plotLayout.addWidget(self.canvas)
self.axes.axis((0.0, 512.0, 0.0, 512.0))
x, y = np.meshgrid(np.linspace(0.0, 512.0, 513), np.linspace(0.0, 512.0, 513))
z = x / 512.0 + y * 0.0
self.mesh = self.axes.pcolormesh(x, y, z, cmap = cm.plasma)
# create navigation toolbar
self.toolbar = NavigationToolbar(self.canvas, self.plotWidget, False)
# remove subplots action
actions = self.toolbar.actions()
if int(matplotlib.__version__[0]) < 2:
self.toolbar.removeAction(actions[7])
else:
self.toolbar.removeAction(actions[6])
self.plotLayout.addWidget(self.toolbar)
# create TCP socket
self.socket = QTcpSocket(self)
self.socket.connected.connect(self.connected)
self.socket.readyRead.connect(self.read_data)
self.socket.error.connect(self.display_error)
# connect signals from buttons and boxes
self.connectButton.clicked.connect(self.start)
self.scanButton.clicked.connect(self.scan)
self.periodValue.valueChanged.connect(self.set_period)
self.trgtimeValue.valueChanged.connect(self.set_trgtime)
self.trginvCheck.stateChanged.connect(self.set_trginv)
self.shdelayValue.valueChanged.connect(self.set_shdelay)
self.shtimeValue.valueChanged.connect(self.set_shtime)
self.shinvCheck.stateChanged.connect(self.set_shinv)
self.acqdelayValue.valueChanged.connect(self.set_acqdelay)
self.samplesValue.valueChanged.connect(self.set_samples)
self.pulsesValue.valueChanged.connect(self.set_pulses)
# create timers
self.startTimer = QTimer(self)
self.startTimer.timeout.connect(self.timeout)
self.meshTimer = QTimer(self)
self.meshTimer.timeout.connect(self.update_mesh)
# set default values
self.periodValue.setValue(200.0)
def __init__(self):
super().__init__()
self.tcpSocket = QTcpSocket(self)
self.blockSize = 0
self.makeRequest()
self.tcpSocket.waitForConnected(1000)
# send any message you like it could come from a widget text.
self.tcpSocket.write(b'hello')
self.tcpSocket.readyRead.connect(self.dealCommunication)
self.tcpSocket.error.connect(self.displayError)
def __init__(self):
super(Client, self).__init__()
self.ui = Ui_Form()
self.ui.setupUi(self)
self.file = QFile()
self.tcpsocket = QTcpSocket()
self.ui.pushButton_Connect.clicked.connect(self.ConnectToServer)
self.tcpsocket.connected.connect(self.SuccessConnect)
self.tcpsocket.readyRead.connect(self.HandleReceive)
def dealSocket(self):
tcpSocket = QTcpSocket() #通信套接字
if tcpSocket.setSocketDescriptor(self.socket):
socktList.append(tcpSocket)
# QTcpSocket缓存接收到新的数据时触发readyRead
tcpSocket.readyRead.connect(lambda: dealRecvMsgE(tcpSocket))
# 断开连接时
tcpSocket.disconnected.connect(lambda: dealDisconnect(tcpSocket))
else:
print("出错了")
def __init__(self, gui):
SessionManager.__init__(self, gui)
self.session_type = SessionType.STUDENT
self.gui = gui
self.running = False
self.teacher_socket = QTcpSocket(
) # this socket connects to the teacher
self.teacher_paused_at = None # pause time if session is paused; None otherwise
self.traffic = [] # FgmsAircraft list
self.known_METAR = None
def __init__(self, request_handler_instance):
QObject.__init__(self)
self.socket = QTcpSocket(self)
self.connectionAttempts = 1
self.socket.readyRead.connect(self.onData)
self.socket.error.connect(self.onSocketError)
self.request_handler_instance = request_handler_instance
self.nextid = 1
self.callbacks_result = {}
self.callbacks_error = {}
self.buffer = b''
def __init__(self, parent=None):
super().__init__(parent)
self.main = parent
# Die Membervariable tcpSocket verwaltet den Kommunikationskanal zum Server.
self.tcpSocket = QTcpSocket(self)
# In der connectToHost-Routine muss die IP-Adresse des Servers eingetragen werden.
# Hier steht zurzeit nur die localhost Adresse: 127.0.0.1
self.tcpSocket.connectToHost('127.0.0.1', 40890)
self.tcpSocket.readyRead.connect(self.readData)
self.mx = None
self.my = None
class TcpClient(QObject):
finished = pyqtSignal()
connected = pyqtSignal()
connectionLost = pyqtSignal()
interpretCmd = pyqtSignal(str)
def __init__(self):
super(TcpClient, self).__init__()
self.__tcp_socket = None
self.connectionLost.connect(self.finished)
self.connectionLost.connect(
lambda: print('## Disconnected from the robot ##'))
@pyqtSlot()
def start_client(self):
print(f'## Connecting to robot at IP: {WIFI_IP}, PORT: {WIFI_PORT} ##')
self.__tcp_socket = QTcpSocket()
self.__tcp_socket.disconnected.connect(self.connectionLost)
self.__tcp_socket.readyRead.connect(self.read_ready)
self.__tcp_socket.connected.connect(self.connected)
self.__tcp_socket.connectToHost(WIFI_IP, WIFI_PORT)
if not self.__tcp_socket.waitForConnected(TIMEOUT_MSEC):
print(
f'## Timeout! {TIMEOUT_MSEC/1000}s has passed and it still hasn\'t connect ##'
)
self.__tcp_socket.disconnectFromHost()
self.finished.emit()
else:
print(
f'## Connected to robot at IP: {WIFI_IP}, PORT: {WIFI_PORT} ##'
)
def stop_client(self):
if self.__tcp_socket is not None:
self.__tcp_socket.disconnectFromHost()
self.finished.emit()
@pyqtSlot()
def read_ready(self):
try:
data = self.__tcp_socket.readAll()
self.interpretCmd.emit(str(data, "utf-8").strip())
except Exception as err:
print(f'tcpClient::read_ready() error msg: {err}')
@pyqtSlot(str)
def send_message(self, payload):
try:
# Example message: 'FP|tr'
# self.__tcp_socket.write(QByteArray().append(json.dumps({'target': 'ARD', 'payload': 'hi'})))
self.__tcp_socket.write(QByteArray().append(payload))
# self.__tcp_socket.flush()
except Exception as err:
print(f'tcpClient::send_message() error msg: {err}')
def __init__(self):
super(TcpClient, self).__init__()
self.ui = Ui_Form()
self.ui.setupUi(self)
self.tcpSocket = QTcpSocket(self)
self.ui.connectButton.clicked.connect(self.buttonConnect)
self.tcpSocket.connected.connect(self.sucessConnect)
self.ui.sendButton.clicked.connect(self.sendMessage)
self.tcpSocket.readyRead.connect(self.showMessage)
self.ui.closeButton.clicked.connect(self.closeConnect)
def __init__(self):
super(TcpServer, self).__init__()
self.ui = Ui_Form()
self.ui.setupUi(self)
self.tcpServer = QTcpServer(self) #指定父对象自动回收空间 监听套接字
self.tcpSocket = QTcpSocket(self) #通信套接字
self.tcpServer.listen(QHostAddress.Any, 8888) #any默认绑定当前网卡的所有IP
self.tcpServer.newConnection.connect(self.handleNewConnection)
self.ui.sendButton.clicked.connect(self.sendMessage)
self.ui.closeButton.clicked.connect(self.closeConnect)
def connect(self, remoteAddress, port):
"""Establishes a connection with the IDE"""
self.__socket = QTcpSocket()
if remoteAddress is None:
self.__socket.connectToHost(QHostAddress.LocalHost, port)
else:
self.__socket.connectToHost(remoteAddress, port)
if not self.__socket.waitForConnected(1000):
raise Exception('Cannot connect to the IDE')
self.__socket.setSocketOption(QAbstractSocket.KeepAliveOption, 1)
self.__socket.setSocketOption(QAbstractSocket.LowDelayOption, 1)
self.__socket.disconnected.connect(self.__onDisconnected)
def __init__(self, parent=None):
super(Voltmeter, self).__init__(parent)
self.setupUi(self)
self.needle = QwtDialSimpleNeedle(QwtDialSimpleNeedle.Arrow)
self.Dial.setNeedle(self.needle)
self.Dial.setValue(1.5)
self.lcdNumber.display(1.5)
self.actionQuit.triggered.connect(self.quit)
self.connect_pb.clicked.connect(self.connect)
self.calib = 3.3 / 256
self.client_socket = QTcpSocket(self)
self.connected = False
def run(self):
print("新连接进入")
self.clientSocket = QTcpSocket()
self.clientSocket.connectToHost(QHostAddress(self.ip), self.port)
clientSocketList.append((self.clientSocket, self.ip, self.port))
self.clientSocket.connected.connect(lambda: print("连接成功"))
self.clientSocket.readyRead.connect(lambda:self.handle_read(self.clientSocket),Qt.DirectConnection)
self.clientSocket.disconnected.connect(self.dealDisconnected,Qt.DirectConnection)
self.exec()
def __init__(self, host, port):
super().__init__()
self.tcpSocket = QTcpSocket()
self.blockSize = 0
self.host = host
self.port = port
self.jim = None
self.connected = False
self.chat_list = []
self.online_users = []
self.active_chat = ''
self.logon()
def invoke_query_of_smhub(self):
self.sock = QTcpSocket()
self.sock.error.connect(self.on_tcp_error)
self.sock.readyRead.connect(self.on_ready_read)
try:
self.sock.connectToHost(self.smarthubIP, 9990)
if not self.sock.waitForConnected(1000):
errstr = "Error Communicating with SmartHub"
print(errstr)
except:
print(self.sock.SocketError())
def __init__(self, args):
super().__init__()
self.socket = QTcpSocket()
self.socket.connectToHost('localhost', args.port)
self.socket.readyRead.connect(self.readFromEmotool)
self.setAttribute(QtCore.Qt.WA_DeleteOnClose)
self.setWindowTitle("EmoTool - {}".format(version()))
self.main_widget = QtWidgets.QTabWidget(self)
plot_tab = QtWidgets.QWidget(self.main_widget)
self.main_widget.addTab(plot_tab, "plot")
l = QtWidgets.QVBoxLayout(plot_tab)
self.plot_widget = plot_widget = pg.PlotWidget()
l.addWidget(plot_widget)
self.plot_widget = plot_widget
# TODO - make a menu action, not open by default
c = pg.console.ConsoleWidget(namespace=globals(), text="test console")
self.main_widget.addTab(c, "debug")
self.main_widget.setFocus()
self.setCentralWidget(self.main_widget)
self.statusBar().showMessage("Starting", 2000)
self.ticks = defaultdict(list)
self.vals = defaultdict(list)
self.data_items = defaultdict(pg.PlotDataItem)
self.incoming = b''
self.next_message_size = None
def __init__(self):
super(Scanner, self).__init__()
self.setupUi(self)
# IP address validator
rx = QRegExp('^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$')
self.addrValue.setValidator(QRegExpValidator(rx, self.addrValue))
# state variable
self.idle = True
# number of samples to show on the plot
self.size = 512 * 512
self.freq = 143.0
# buffer and offset for the incoming samples
self.buffer = bytearray(8 * self.size)
self.offset = 0
self.data = np.frombuffer(self.buffer, np.int32)
# create figure
figure = Figure()
figure.set_facecolor('none')
self.axes = figure.add_subplot(111)
self.canvas = FigureCanvas(figure)
self.plotLayout.addWidget(self.canvas)
self.axes.axis((0.0, 512.0, 0.0, 512.0))
x, y = np.meshgrid(np.linspace(0.0, 512.0, 513), np.linspace(0.0, 512.0, 513))
z = x / 512.0 + y * 0.0
self.mesh = self.axes.pcolormesh(x, y, z, cmap = cm.plasma)
# create navigation toolbar
self.toolbar = NavigationToolbar(self.canvas, self.plotWidget, False)
# remove subplots action
actions = self.toolbar.actions()
if int(matplotlib.__version__[0]) < 2:
self.toolbar.removeAction(actions[7])
else:
self.toolbar.removeAction(actions[6])
self.plotLayout.addWidget(self.toolbar)
# create TCP socket
self.socket = QTcpSocket(self)
self.socket.connected.connect(self.connected)
self.socket.readyRead.connect(self.read_data)
self.socket.error.connect(self.display_error)
# connect signals from buttons and boxes
self.connectButton.clicked.connect(self.start)
self.scanButton.clicked.connect(self.scan)
self.periodValue.valueChanged.connect(self.set_period)
self.trgtimeValue.valueChanged.connect(self.set_trgtime)
self.trginvCheck.stateChanged.connect(self.set_trginv)
self.shdelayValue.valueChanged.connect(self.set_shdelay)
self.shtimeValue.valueChanged.connect(self.set_shtime)
self.shinvCheck.stateChanged.connect(self.set_shinv)
self.acqdelayValue.valueChanged.connect(self.set_acqdelay)
self.samplesValue.valueChanged.connect(self.set_samples)
self.pulsesValue.valueChanged.connect(self.set_pulses)
# create timers
self.startTimer = QTimer(self)
self.startTimer.timeout.connect(self.timeout)
self.meshTimer = QTimer(self)
self.meshTimer.timeout.connect(self.update_mesh)
# set default values
self.periodValue.setValue(200.0)
class Client(QObject):
def __init__(self, parent=None):
super().__init__(parent)
self.log = logging.getLogger(__name__)
self._socket_setup()
def _socket_setup(self):
self.socket = QTcpSocket(self)
self.socket.setSocketOption(QTcpSocket.KeepAliveOption, 1)
self.socket.connected.connect(self.on_connected)
self.socket.disconnected.connect(self.on_disconnected)
self.socket.readyRead.connect(self.on_readyRead)
self.socket.error.connect(self.on_error)
self.socket.stateChanged.connect(self.on_stateChanged)
def connect(self, host=HOST, port=PORT):
if not self.socket.isOpen():
self.log.info('connecting to {}:{}'.format(host, port))
self.socket.connectToHost(QHostAddress(host), port)
def disconnect(self):
self.log.info('disconnecting')
self.socket.disconnectFromHost()
def on_readyRead(self):
data = bytes()
while self.socket.bytesAvailable():
data += self.socket.read(1024)
self.log.debug(data)
def on_connected(self):
self.log.info('connected')
def on_disconnected(self):
self.log.info('disconnected')
def on_error(self, error):
self.log.error('error {}: {}'.format(error, self.socket.errorString()))
def on_stateChanged(self, state):
states = ['Unconnected', 'HostLookup', 'Connecting', 'Connected', 'Bound', 'Closing', 'Listening']
self.log.debug('state changed to {}'.format(states[state]))
def _socket_setup(self):
self.socket = QTcpSocket(self)
self.socket.setSocketOption(QTcpSocket.KeepAliveOption, 1)
self.socket.connected.connect(self.on_connected)
self.socket.disconnected.connect(self.on_disconnected)
self.socket.readyRead.connect(self.on_readyRead)
self.socket.error.connect(self.on_error)
self.socket.stateChanged.connect(self.on_stateChanged)
def __init__(self, socket=None):
super(TcpClient, self).__init__()
self.is_connected = False
if socket is None:
self.socket = QTcpSocket()
else:
self.socket = socket
self.socket.error.connect(self.error)
self.socket.connected.connect(self.connected)
self.socket.disconnected.connect(self.disconnected)
self.socket.readyRead.connect(self.readyRead)
def run(self):
tcpSocket = QTcpSocket()
if not tcpSocket.setSocketDescriptor(self.socketDescriptor):
self.error.emit(tcpSocket.error())
return
block = QByteArray()
outstr = QDataStream(block, QIODevice.WriteOnly)
outstr.setVersion(QDataStream.Qt_4_0)
outstr.writeUInt16(0)
outstr.writeQString(self.text)
outstr.device().seek(0)
outstr.writeUInt16(block.size() - 2)
tcpSocket.write(block)
tcpSocket.disconnectFromHost()
tcpSocket.waitForDisconnected()
class TcpClient(QObject):
def __init__(self, socket=None):
super(TcpClient, self).__init__()
self.is_connected = False
if socket is None:
self.socket = QTcpSocket()
else:
self.socket = socket
self.socket.error.connect(self.error)
self.socket.connected.connect(self.connected)
self.socket.disconnected.connect(self.disconnected)
self.socket.readyRead.connect(self.readyRead)
@pyqtSlot()
def error(self):
print self.socket.errorString()
@pyqtSlot()
def connected(self):
self.is_connected = True
print 'TcpClient connected'
@pyqtSlot()
def disconnected(self):
self.is_connected = False
print 'TcpClient disconnected'
@pyqtSlot()
def readyRead(self):
data = self.socket.readAll()
self.parse_data(data)
def connectToHost(self, host, port):
print 'Trying to connect to host', host, 'at port', port
self.socket.connectToHost(host, port)
def disconnectFromHost(self):
self.socket.disconnectFromHost()
def write(self, buf):
self.socket.write(buf)
def parse_data(self, data):
# Placeholder function; override it with your own implementation
print str(data).strip()
def __init__(self):
super(PulsedNMR, self).__init__()
self.setupUi(self)
self.rateValue.addItems(['25', '50', '250', '500', '2500'])
# IP address validator
rx = QRegExp('^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$')
self.addrValue.setValidator(QRegExpValidator(rx, self.addrValue))
# state variable
self.idle = True
# number of samples to show on the plot
self.size = 50000
# buffer and offset for the incoming samples
self.buffer = bytearray(8 * self.size)
self.offset = 0
self.data = np.frombuffer(self.buffer, np.complex64)
# create figure
figure = Figure()
figure.set_facecolor('none')
self.axes = figure.add_subplot(111)
self.canvas = FigureCanvas(figure)
self.plotLayout.addWidget(self.canvas)
# create navigation toolbar
self.toolbar = NavigationToolbar(self.canvas, self.plotWidget, False)
# remove subplots action
actions = self.toolbar.actions()
self.toolbar.removeAction(actions[7])
self.plotLayout.addWidget(self.toolbar)
# create TCP socket
self.socket = QTcpSocket(self)
self.socket.connected.connect(self.connected)
self.socket.readyRead.connect(self.read_data)
self.socket.error.connect(self.display_error)
# connect signals from buttons and boxes
self.startButton.clicked.connect(self.start)
self.freqValue.valueChanged.connect(self.set_freq)
self.awidthValue.valueChanged.connect(self.set_awidth)
self.deltaValue.valueChanged.connect(self.set_delta)
self.rateValue.currentIndexChanged.connect(self.set_rate)
# set rate
self.rateValue.setCurrentIndex(2)
# create timer for the repetitions
self.timer = QTimer(self)
self.timer.timeout.connect(self.fire)
def __init__(self, parent=None):
super(Dialog, self).__init__(parent)
self.tcpServer = QTcpServer()
self.tcpClient = QTcpSocket()
self.bytesToWrite = 0
self.bytesWritten = 0
self.bytesReceived = 0
self.clientProgressBar = QProgressBar()
self.clientStatusLabel = QLabel("Client ready")
self.serverProgressBar = QProgressBar()
self.serverStatusLabel = QLabel("Server ready")
self.startButton = QPushButton("&Start")
self.quitButton = QPushButton("&Quit")
buttonBox = QDialogButtonBox()
buttonBox.addButton(self.startButton, QDialogButtonBox.ActionRole)
buttonBox.addButton(self.quitButton, QDialogButtonBox.RejectRole)
self.startButton.clicked.connect(self.start)
self.quitButton.clicked.connect(self.close)
self.tcpServer.newConnection.connect(self.acceptConnection)
self.tcpClient.connected.connect(self.startTransfer)
self.tcpClient.bytesWritten.connect(self.updateClientProgress)
self.tcpClient.error.connect(self.displayError)
mainLayout = QVBoxLayout()
mainLayout.addWidget(self.clientProgressBar)
mainLayout.addWidget(self.clientStatusLabel)
mainLayout.addWidget(self.serverProgressBar)
mainLayout.addWidget(self.serverStatusLabel)
mainLayout.addStretch(1)
mainLayout.addSpacing(10)
mainLayout.addWidget(buttonBox)
self.setLayout(mainLayout)
self.setWindowTitle("Loopback")
def __init__(self, *args):
super(Main, self).__init__(*args)
loadUi('mainwindow.ui', self)
self.host.setText("localhost")
self.port.setText("11010")
self.prompt.setText("M114")
self.conn = QTcpSocket(self)
self.conn.readyRead.connect(self.readSocket)
self.conn.error.connect(self.socketError)
self.conn.connected.connect(self.socketConnect)
self.conn.disconnected.connect(self.socketDisconnect)
self.connected = False
self.actionSave.triggered.connect(self.save)
self.prompt.setFocus()
self.do_connect()
class Dialog(QDialog):
TotalBytes = 50 * 1024 * 1024
PayloadSize = 65536
def __init__(self, parent=None):
super(Dialog, self).__init__(parent)
self.tcpServer = QTcpServer()
self.tcpClient = QTcpSocket()
self.bytesToWrite = 0
self.bytesWritten = 0
self.bytesReceived = 0
self.clientProgressBar = QProgressBar()
self.clientStatusLabel = QLabel("Client ready")
self.serverProgressBar = QProgressBar()
self.serverStatusLabel = QLabel("Server ready")
self.startButton = QPushButton("&Start")
self.quitButton = QPushButton("&Quit")
buttonBox = QDialogButtonBox()
buttonBox.addButton(self.startButton, QDialogButtonBox.ActionRole)
buttonBox.addButton(self.quitButton, QDialogButtonBox.RejectRole)
self.startButton.clicked.connect(self.start)
self.quitButton.clicked.connect(self.close)
self.tcpServer.newConnection.connect(self.acceptConnection)
self.tcpClient.connected.connect(self.startTransfer)
self.tcpClient.bytesWritten.connect(self.updateClientProgress)
self.tcpClient.error.connect(self.displayError)
mainLayout = QVBoxLayout()
mainLayout.addWidget(self.clientProgressBar)
mainLayout.addWidget(self.clientStatusLabel)
mainLayout.addWidget(self.serverProgressBar)
mainLayout.addWidget(self.serverStatusLabel)
mainLayout.addStretch(1)
mainLayout.addSpacing(10)
mainLayout.addWidget(buttonBox)
self.setLayout(mainLayout)
self.setWindowTitle("Loopback")
def start(self):
self.startButton.setEnabled(False)
QApplication.setOverrideCursor(Qt.WaitCursor)
self.bytesWritten = 0
self.bytesReceived = 0
while not self.tcpServer.isListening() and not self.tcpServer.listen():
ret = QMessageBox.critical(self, "Loopback",
"Unable to start the test: %s." % self.tcpServer.errorString(),
QMessageBox.Retry | QMessageBox.Cancel)
if ret == QMessageBox.Cancel:
return
self.serverStatusLabel.setText("Listening")
self.clientStatusLabel.setText("Connecting")
self.tcpClient.connectToHost(QHostAddress(QHostAddress.LocalHost), self.tcpServer.serverPort())
def acceptConnection(self):
self.tcpServerConnection = self.tcpServer.nextPendingConnection()
self.tcpServerConnection.readyRead.connect(self.updateServerProgress)
self.tcpServerConnection.error.connect(self.displayError)
self.serverStatusLabel.setText("Accepted connection")
self.tcpServer.close()
def startTransfer(self):
self.bytesToWrite = Dialog.TotalBytes - self.tcpClient.write(QByteArray(Dialog.PayloadSize, '@'))
self.clientStatusLabel.setText("Connected")
def updateServerProgress(self):
self.bytesReceived += self.tcpServerConnection.bytesAvailable()
self.tcpServerConnection.readAll()
self.serverProgressBar.setMaximum(Dialog.TotalBytes)
self.serverProgressBar.setValue(self.bytesReceived)
self.serverStatusLabel.setText("Received %dMB" % (self.bytesReceived / (1024 * 1024)))
if self.bytesReceived == Dialog.TotalBytes:
self.tcpServerConnection.close()
self.startButton.setEnabled(True)
QApplication.restoreOverrideCursor()
def updateClientProgress(self, numBytes):
self.bytesWritten += numBytes
if self.bytesToWrite > 0:
self.bytesToWrite -= self.tcpClient.write(QByteArray(
min(self.bytesToWrite, Dialog.PayloadSize), '@'))
self.clientProgressBar.setMaximum(Dialog.TotalBytes)
self.clientProgressBar.setValue(self.bytesWritten)
self.clientStatusLabel.setText("Sent %dMB" % (self.bytesWritten / (1024 * 1024)))
def displayError(self, socketError):
if socketError == QTcpSocket.RemoteHostClosedError:
return
QMessageBox.information(self, "Network error",
"The following error occured: %s." % self.tcpClient.errorString())
self.tcpClient.close()
self.tcpServer.close()
self.clientProgressBar.reset()
self.serverProgressBar.reset()
self.clientStatusLabel.setText("Client ready")
self.serverStatusLabel.setText("Server ready")
self.startButton.setEnabled(True)
QApplication.restoreOverrideCursor()
def __init__(self):
super(VNA, self).__init__()
self.setupUi(self)
# IP address validator
rx = QRegExp('^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$')
self.addrValue.setValidator(QRegExpValidator(rx, self.addrValue))
# state variables
self.idle = True
self.reading = False
# sweep parameters
self.sweep_start = 100
self.sweep_stop = 60000
self.sweep_size = 600
self.xaxis, self.sweep_step = np.linspace(self.sweep_start, self.sweep_stop, self.sweep_size, retstep = True)
self.xaxis *= 1000
# buffer and offset for the incoming samples
self.buffer = bytearray(24 * VNA.max_size)
self.offset = 0
self.data = np.frombuffer(self.buffer, np.complex64)
self.adc1 = np.zeros(VNA.max_size, np.complex64)
self.adc2 = np.zeros(VNA.max_size, np.complex64)
self.dac1 = np.zeros(VNA.max_size, np.complex64)
self.open = np.zeros(VNA.max_size, np.complex64)
self.short = np.zeros(VNA.max_size, np.complex64)
self.load = np.zeros(VNA.max_size, np.complex64)
self.dut = np.zeros(VNA.max_size, np.complex64)
self.mode = 'dut'
# create figure
self.figure = Figure()
self.figure.set_facecolor('none')
self.canvas = FigureCanvas(self.figure)
self.plotLayout.addWidget(self.canvas)
# create navigation toolbar
self.toolbar = NavigationToolbar(self.canvas, self.plotWidget, False)
# initialize cursor
self.cursor = None
# remove subplots action
actions = self.toolbar.actions()
self.toolbar.removeAction(actions[7])
self.plotLayout.addWidget(self.toolbar)
# create TCP socket
self.socket = QTcpSocket(self)
self.socket.connected.connect(self.connected)
self.socket.readyRead.connect(self.read_data)
self.socket.error.connect(self.display_error)
# connect signals from buttons and boxes
self.sweepFrame.setEnabled(False)
self.dutSweep.setEnabled(False)
self.connectButton.clicked.connect(self.start)
self.writeButton.clicked.connect(self.write_cfg)
self.readButton.clicked.connect(self.read_cfg)
self.openSweep.clicked.connect(self.sweep_open)
self.shortSweep.clicked.connect(self.sweep_short)
self.loadSweep.clicked.connect(self.sweep_load)
self.dutSweep.clicked.connect(self.sweep_dut)
self.csvButton.clicked.connect(self.write_csv)
self.s1pButton.clicked.connect(self.write_s1p)
self.s2pButton.clicked.connect(self.write_s2p)
self.startValue.valueChanged.connect(self.set_start)
self.stopValue.valueChanged.connect(self.set_stop)
self.sizeValue.valueChanged.connect(self.set_size)
self.rateValue.addItems(['500', '100', '50', '10', '5', '1'])
self.rateValue.lineEdit().setReadOnly(True)
self.rateValue.lineEdit().setAlignment(Qt.AlignRight)
for i in range(0, self.rateValue.count()):
self.rateValue.setItemData(i, Qt.AlignRight, Qt.TextAlignmentRole)
self.rateValue.currentIndexChanged.connect(self.set_rate)
self.corrValue.valueChanged.connect(self.set_corr)
self.levelValue.valueChanged.connect(self.set_level)
self.openPlot.clicked.connect(self.plot_open)
self.shortPlot.clicked.connect(self.plot_short)
self.loadPlot.clicked.connect(self.plot_load)
self.dutPlot.clicked.connect(self.plot_dut)
self.smithPlot.clicked.connect(self.plot_smith)
self.impPlot.clicked.connect(self.plot_imp)
self.rcPlot.clicked.connect(self.plot_rc)
self.swrPlot.clicked.connect(self.plot_swr)
self.rlPlot.clicked.connect(self.plot_rl)
self.gainPlot.clicked.connect(self.plot_gain)
# create timer
self.startTimer = QTimer(self)
self.startTimer.timeout.connect(self.timeout)
class VNA(QMainWindow, Ui_VNA):
max_size = 16384
def __init__(self):
super(VNA, self).__init__()
self.setupUi(self)
# IP address validator
rx = QRegExp('^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$')
self.addrValue.setValidator(QRegExpValidator(rx, self.addrValue))
# state variables
self.idle = True
self.reading = False
# sweep parameters
self.sweep_start = 100
self.sweep_stop = 60000
self.sweep_size = 600
self.xaxis, self.sweep_step = np.linspace(self.sweep_start, self.sweep_stop, self.sweep_size, retstep = True)
self.xaxis *= 1000
# buffer and offset for the incoming samples
self.buffer = bytearray(24 * VNA.max_size)
self.offset = 0
self.data = np.frombuffer(self.buffer, np.complex64)
self.adc1 = np.zeros(VNA.max_size, np.complex64)
self.adc2 = np.zeros(VNA.max_size, np.complex64)
self.dac1 = np.zeros(VNA.max_size, np.complex64)
self.open = np.zeros(VNA.max_size, np.complex64)
self.short = np.zeros(VNA.max_size, np.complex64)
self.load = np.zeros(VNA.max_size, np.complex64)
self.dut = np.zeros(VNA.max_size, np.complex64)
self.mode = 'dut'
# create figure
self.figure = Figure()
self.figure.set_facecolor('none')
self.canvas = FigureCanvas(self.figure)
self.plotLayout.addWidget(self.canvas)
# create navigation toolbar
self.toolbar = NavigationToolbar(self.canvas, self.plotWidget, False)
# initialize cursor
self.cursor = None
# remove subplots action
actions = self.toolbar.actions()
self.toolbar.removeAction(actions[7])
self.plotLayout.addWidget(self.toolbar)
# create TCP socket
self.socket = QTcpSocket(self)
self.socket.connected.connect(self.connected)
self.socket.readyRead.connect(self.read_data)
self.socket.error.connect(self.display_error)
# connect signals from buttons and boxes
self.sweepFrame.setEnabled(False)
self.dutSweep.setEnabled(False)
self.connectButton.clicked.connect(self.start)
self.writeButton.clicked.connect(self.write_cfg)
self.readButton.clicked.connect(self.read_cfg)
self.openSweep.clicked.connect(self.sweep_open)
self.shortSweep.clicked.connect(self.sweep_short)
self.loadSweep.clicked.connect(self.sweep_load)
self.dutSweep.clicked.connect(self.sweep_dut)
self.csvButton.clicked.connect(self.write_csv)
self.s1pButton.clicked.connect(self.write_s1p)
self.s2pButton.clicked.connect(self.write_s2p)
self.startValue.valueChanged.connect(self.set_start)
self.stopValue.valueChanged.connect(self.set_stop)
self.sizeValue.valueChanged.connect(self.set_size)
self.rateValue.addItems(['500', '100', '50', '10', '5', '1'])
self.rateValue.lineEdit().setReadOnly(True)
self.rateValue.lineEdit().setAlignment(Qt.AlignRight)
for i in range(0, self.rateValue.count()):
self.rateValue.setItemData(i, Qt.AlignRight, Qt.TextAlignmentRole)
self.rateValue.currentIndexChanged.connect(self.set_rate)
self.corrValue.valueChanged.connect(self.set_corr)
self.levelValue.valueChanged.connect(self.set_level)
self.openPlot.clicked.connect(self.plot_open)
self.shortPlot.clicked.connect(self.plot_short)
self.loadPlot.clicked.connect(self.plot_load)
self.dutPlot.clicked.connect(self.plot_dut)
self.smithPlot.clicked.connect(self.plot_smith)
self.impPlot.clicked.connect(self.plot_imp)
self.rcPlot.clicked.connect(self.plot_rc)
self.swrPlot.clicked.connect(self.plot_swr)
self.rlPlot.clicked.connect(self.plot_rl)
self.gainPlot.clicked.connect(self.plot_gain)
# create timer
self.startTimer = QTimer(self)
self.startTimer.timeout.connect(self.timeout)
def start(self):
if self.idle:
self.connectButton.setEnabled(False)
self.socket.connectToHost(self.addrValue.text(), 1001)
self.startTimer.start(5000)
else:
self.stop()
def stop(self):
self.idle = True
self.socket.abort()
self.connectButton.setText('Connect')
self.connectButton.setEnabled(True)
self.sweepFrame.setEnabled(False)
self.selectFrame.setEnabled(True)
self.dutSweep.setEnabled(False)
def timeout(self):
self.display_error('timeout')
def connected(self):
self.startTimer.stop()
self.idle = False
self.set_start(self.startValue.value())
self.set_stop(self.stopValue.value())
self.set_size(self.sizeValue.value())
self.set_rate(self.rateValue.currentIndex())
self.set_corr(self.corrValue.value())
self.set_level(self.levelValue.value())
self.connectButton.setText('Disconnect')
self.connectButton.setEnabled(True)
self.sweepFrame.setEnabled(True)
self.dutSweep.setEnabled(True)
def read_data(self):
if not self.reading:
self.socket.readAll()
return
size = self.socket.bytesAvailable()
self.progress.setValue((self.offset + size) / 24)
limit = 24 * (self.sweep_size + 1)
if self.offset + size < limit:
self.buffer[self.offset:self.offset + size] = self.socket.read(size)
self.offset += size
else:
self.buffer[self.offset:limit] = self.socket.read(limit - self.offset)
self.adc1 = self.data[0::3]
self.adc2 = self.data[1::3]
self.dac1 = self.data[2::3]
getattr(self, self.mode)[0:self.sweep_size] = self.adc1[1:self.sweep_size + 1] / self.dac1[1:self.sweep_size + 1]
getattr(self, 'plot_%s' % self.mode)()
self.reading = False
self.sweepFrame.setEnabled(True)
self.selectFrame.setEnabled(True)
def display_error(self, socketError):
self.startTimer.stop()
if socketError == 'timeout':
QMessageBox.information(self, 'VNA', 'Error: connection timeout.')
else:
QMessageBox.information(self, 'VNA', 'Error: %s.' % self.socket.errorString())
self.stop()
def set_start(self, value):
self.sweep_start = value
self.xaxis, self.sweep_step = np.linspace(self.sweep_start, self.sweep_stop, self.sweep_size, retstep = True)
self.xaxis *= 1000
if self.idle: return
self.socket.write(struct.pack('<I', 0<<28 | int(value * 1000)))
def set_stop(self, value):
self.sweep_stop = value
self.xaxis, self.sweep_step = np.linspace(self.sweep_start, self.sweep_stop, self.sweep_size, retstep = True)
self.xaxis *= 1000
if self.idle: return
self.socket.write(struct.pack('<I', 1<<28 | int(value * 1000)))
def set_size(self, value):
self.sweep_size = value
self.xaxis, self.sweep_step = np.linspace(self.sweep_start, self.sweep_stop, self.sweep_size, retstep = True)
self.xaxis *= 1000
if self.idle: return
self.socket.write(struct.pack('<I', 2<<28 | int(value)))
def set_rate(self, value):
if self.idle: return
rate = [1, 5, 10, 50, 100, 500][value]
self.socket.write(struct.pack('<I', 3<<28 | int(rate)))
def set_corr(self, value):
if self.idle: return
self.socket.write(struct.pack('<I', 4<<28 | int(value)))
def set_level(self, value):
if self.idle: return
self.socket.write(struct.pack('<I', 5<<28 | int(32767 * np.power(10.0, value / 20.0))))
def sweep(self):
if self.idle: return
self.sweepFrame.setEnabled(False)
self.selectFrame.setEnabled(False)
self.socket.write(struct.pack('<I', 6<<28))
self.offset = 0
self.reading = True
self.progress = QProgressDialog('Sweep status', 'Cancel', 0, self.sweep_size + 1)
self.progress.setModal(True)
self.progress.setMinimumDuration(1000)
self.progress.canceled.connect(self.cancel)
def cancel(self):
self.offset = 0
self.reading = False
self.socket.write(struct.pack('<I', 7<<28))
self.sweepFrame.setEnabled(True)
self.selectFrame.setEnabled(True)
def sweep_open(self):
self.mode = 'open'
self.sweep()
def sweep_short(self):
self.mode = 'short'
self.sweep()
def sweep_load(self):
self.mode = 'load'
self.sweep()
def sweep_dut(self):
self.mode = 'dut'
self.sweep()
def gain(self):
size = self.sweep_size
return self.dut[0:size]/self.short[0:size]
def impedance(self):
size = self.sweep_size
return 50.0 * (self.open[0:size] - self.load[0:size]) * (self.dut[0:size] - self.short[0:size]) / ((self.load[0:size] - self.short[0:size]) * (self.open[0:size] - self.dut[0:size]))
def gamma(self):
z = self.impedance()
return (z - 50.0)/(z + 50.0)
def plot_gain(self):
if self.cursor is not None: self.cursor.hide().disable()
matplotlib.rcdefaults()
self.figure.clf()
self.figure.subplots_adjust(left = 0.12, bottom = 0.12, right = 0.88, top = 0.98)
axes1 = self.figure.add_subplot(111)
axes1.cla()
axes1.xaxis.set_major_formatter(FuncFormatter(metric_prefix))
axes1.yaxis.set_major_formatter(FuncFormatter(metric_prefix))
axes1.tick_params('y', color = 'blue', labelcolor = 'blue')
axes1.yaxis.label.set_color('blue')
gain = self.gain()
axes1.plot(self.xaxis, 20.0 * np.log10(np.absolute(gain)), color = 'blue', label = 'Gain')
axes2 = axes1.twinx()
axes2.spines['left'].set_color('blue')
axes2.spines['right'].set_color('red')
axes1.set_xlabel('Hz')
axes1.set_ylabel('Gain, dB')
axes2.set_ylabel('Phase angle')
axes2.tick_params('y', color = 'red', labelcolor = 'red')
axes2.yaxis.label.set_color('red')
axes2.plot(self.xaxis, np.angle(gain, deg = True), color = 'red', label = 'Phase angle')
self.cursor = datacursor(axes = self.figure.get_axes(), formatter = LabelFormatter(), display = 'multiple')
self.canvas.draw()
def plot_magphase(self, data):
if self.cursor is not None: self.cursor.hide().disable()
matplotlib.rcdefaults()
self.figure.clf()
self.figure.subplots_adjust(left = 0.12, bottom = 0.12, right = 0.88, top = 0.98)
axes1 = self.figure.add_subplot(111)
axes1.cla()
axes1.xaxis.set_major_formatter(FuncFormatter(metric_prefix))
axes1.yaxis.set_major_formatter(FuncFormatter(metric_prefix))
axes1.tick_params('y', color = 'blue', labelcolor = 'blue')
axes1.yaxis.label.set_color('blue')
axes1.plot(self.xaxis, np.absolute(data), color = 'blue', label = 'Magnitude')
axes2 = axes1.twinx()
axes2.spines['left'].set_color('blue')
axes2.spines['right'].set_color('red')
axes1.set_xlabel('Hz')
axes1.set_ylabel('Magnitude')
axes2.set_ylabel('Phase angle')
axes2.tick_params('y', color = 'red', labelcolor = 'red')
axes2.yaxis.label.set_color('red')
axes2.plot(self.xaxis, np.angle(data, deg = True), color = 'red', label = 'Phase angle')
self.cursor = datacursor(axes = self.figure.get_axes(), formatter = LabelFormatter(), display = 'multiple')
self.canvas.draw()
def plot_open(self):
self.plot_magphase(self.open[0:self.sweep_size])
def plot_short(self):
self.plot_magphase(self.short[0:self.sweep_size])
def plot_load(self):
self.plot_magphase(self.load[0:self.sweep_size])
def plot_dut(self):
self.plot_magphase(self.dut[0:self.sweep_size])
def plot_smith_grid(self, axes, color):
load = 50.0
ticks = np.array([0.0, 0.2, 0.5, 1.0, 2.0, 5.0])
for tick in ticks * load:
axis = np.logspace(-4, np.log10(1.0e3), 200) * load
z = tick + 1.0j * axis
gamma = (z - load)/(z + load)
axes.plot(gamma.real, gamma.imag, color = color, linewidth = 0.4, alpha = 0.3)
axes.plot(gamma.real, -gamma.imag, color = color, linewidth = 0.4, alpha = 0.3)
z = axis + 1.0j * tick
gamma = (z - load)/(z + load)
axes.plot(gamma.real, gamma.imag, color = color, linewidth = 0.4, alpha = 0.3)
axes.plot(gamma.real, -gamma.imag, color = color, linewidth = 0.4, alpha = 0.3)
if tick == 0.0:
axes.text(1.0, 0.0, u'\u221E', color = color, ha = 'left', va = 'center', clip_on = True, fontsize = 18.0)
axes.text(-1.0, 0.0, u'0\u03A9', color = color, ha = 'left', va = 'bottom', clip_on = True, fontsize = 12.0)
continue
lab = u'%d\u03A9' % tick
x = (tick - load) / (tick + load)
axes.text(x, 0.0, lab, color = color, ha = 'left', va = 'bottom', clip_on = True, fontsize = 12.0)
lab = u'j%d\u03A9' % tick
z = 1.0j * tick
gamma = (z - load)/(z + load) * 1.05
x = gamma.real
y = gamma.imag
angle = np.angle(gamma) * 180.0 / np.pi - 90.0
axes.text(x, y, lab, color = color, ha = 'center', va = 'center', clip_on = True, rotation = angle, fontsize = 12.0)
lab = u'-j%d\u03A9' % tick
axes.text(x, -y, lab, color = color, ha = 'center', va = 'center', clip_on = True, rotation = -angle, fontsize = 12.0)
def plot_smith(self):
if self.cursor is not None: self.cursor.hide().disable()
matplotlib.rcdefaults()
self.figure.clf()
self.figure.subplots_adjust(left = 0.0, bottom = 0.0, right = 1.0, top = 1.0)
axes1 = self.figure.add_subplot(111)
self.plot_smith_grid(axes1, 'blue')
gamma = self.gamma()
plot, = axes1.plot(gamma.real, gamma.imag, color = 'red')
axes1.axis('equal')
axes1.set_xlim(-1.12, 1.12)
axes1.set_ylim(-1.12, 1.12)
axes1.xaxis.set_visible(False)
axes1.yaxis.set_visible(False)
for loc, spine in axes1.spines.items():
spine.set_visible(False)
self.cursor = datacursor(plot, formatter = SmithFormatter(self.xaxis), display = 'multiple')
self.canvas.draw()
def plot_imp(self):
self.plot_magphase(self.impedance())
def plot_rc(self):
self.plot_magphase(self.gamma())
def plot_swr(self):
if self.cursor is not None: self.cursor.hide().disable()
matplotlib.rcdefaults()
self.figure.clf()
self.figure.subplots_adjust(left = 0.12, bottom = 0.12, right = 0.88, top = 0.98)
axes1 = self.figure.add_subplot(111)
axes1.cla()
axes1.xaxis.set_major_formatter(FuncFormatter(metric_prefix))
axes1.yaxis.set_major_formatter(FuncFormatter(metric_prefix))
axes1.set_xlabel('Hz')
axes1.set_ylabel('SWR')
magnitude = np.absolute(self.gamma())
swr = np.maximum(1.0, np.minimum(100.0, (1.0 + magnitude) / np.maximum(1.0e-20, 1.0 - magnitude)))
axes1.plot(self.xaxis, swr, color = 'blue', label = 'SWR')
self.cursor = datacursor(axes = self.figure.get_axes(), formatter = LabelFormatter(), display = 'multiple')
self.canvas.draw()
def plot_rl(self):
if self.cursor is not None: self.cursor.hide().disable()
matplotlib.rcdefaults()
self.figure.clf()
self.figure.subplots_adjust(left = 0.12, bottom = 0.12, right = 0.88, top = 0.98)
axes1 = self.figure.add_subplot(111)
axes1.cla()
axes1.xaxis.set_major_formatter(FuncFormatter(metric_prefix))
axes1.set_xlabel('Hz')
axes1.set_ylabel('Return loss, dB')
magnitude = np.absolute(self.gamma())
axes1.plot(self.xaxis, 20.0 * np.log10(magnitude), color = 'blue', label = 'Return loss')
self.cursor = datacursor(axes = self.figure.get_axes(), formatter = LabelFormatter(), display = 'multiple')
self.canvas.draw()
def write_cfg(self):
dialog = QFileDialog(self, 'Write configuration settings', '.', '*.ini')
dialog.setDefaultSuffix('ini')
dialog.setAcceptMode(QFileDialog.AcceptSave)
dialog.setOptions(QFileDialog.DontConfirmOverwrite)
if dialog.exec() == QDialog.Accepted:
name = dialog.selectedFiles()
settings = QSettings(name[0], QSettings.IniFormat)
self.write_cfg_settings(settings)
def read_cfg(self):
dialog = QFileDialog(self, 'Read configuration settings', '.', '*.ini')
dialog.setDefaultSuffix('ini')
dialog.setAcceptMode(QFileDialog.AcceptOpen)
if dialog.exec() == QDialog.Accepted:
name = dialog.selectedFiles()
settings = QSettings(name[0], QSettings.IniFormat)
self.read_cfg_settings(settings)
def write_cfg_settings(self, settings):
settings.setValue('addr', self.addrValue.text())
settings.setValue('start', self.startValue.value())
settings.setValue('stop', self.stopValue.value())
settings.setValue('rate', self.rateValue.currentIndex())
settings.setValue('corr', self.corrValue.value())
size = self.sizeValue.value()
settings.setValue('size', size)
for i in range(0, size):
settings.setValue('open_real_%d' % i, float(self.open.real[i]))
settings.setValue('open_imag_%d' % i, float(self.open.imag[i]))
for i in range(0, size):
settings.setValue('short_real_%d' % i, float(self.short.real[i]))
settings.setValue('short_imag_%d' % i, float(self.short.imag[i]))
for i in range(0, size):
settings.setValue('load_real_%d' % i, float(self.load.real[i]))
settings.setValue('load_imag_%d' % i, float(self.load.imag[i]))
for i in range(0, size):
settings.setValue('dut_real_%d' % i, float(self.dut.real[i]))
settings.setValue('dut_imag_%d' % i, float(self.dut.imag[i]))
def read_cfg_settings(self, settings):
self.addrValue.setText(settings.value('addr', '192.168.1.100'))
self.startValue.setValue(settings.value('start', 100, type = int))
self.stopValue.setValue(settings.value('stop', 60000, type = int))
self.rateValue.setCurrentIndex(settings.value('rate', 0, type = int))
self.corrValue.setValue(settings.value('corr', 0, type = int))
size = settings.value('size', 600, type = int)
self.sizeValue.setValue(size)
for i in range(0, size):
real = settings.value('open_real_%d' % i, 0.0, type = float)
imag = settings.value('open_imag_%d' % i, 0.0, type = float)
self.open[i] = real + 1.0j * imag
for i in range(0, size):
real = settings.value('short_real_%d' % i, 0.0, type = float)
imag = settings.value('short_imag_%d' % i, 0.0, type = float)
self.short[i] = real + 1.0j * imag
for i in range(0, size):
real = settings.value('load_real_%d' % i, 0.0, type = float)
imag = settings.value('load_imag_%d' % i, 0.0, type = float)
self.load[i] = real + 1.0j * imag
for i in range(0, size):
real = settings.value('dut_real_%d' % i, 0.0, type = float)
imag = settings.value('dut_imag_%d' % i, 0.0, type = float)
self.dut[i] = real + 1.0j * imag
def write_csv(self):
dialog = QFileDialog(self, 'Write csv file', '.', '*.csv')
dialog.setDefaultSuffix('csv')
dialog.setAcceptMode(QFileDialog.AcceptSave)
dialog.setOptions(QFileDialog.DontConfirmOverwrite)
if dialog.exec() == QDialog.Accepted:
name = dialog.selectedFiles()
fh = open(name[0], 'w')
gamma = self.gamma()
size = self.sizeValue.value()
fh.write('frequency;open.real;open.imag;short.real;short.imag;load.real;load.imag;dut.real;dut.imag\n')
for i in range(0, size):
fh.write('0.0%.8d;%12.9f;%12.9f;%12.9f;%12.9f;%12.9f;%12.9f;%12.9f;%12.9f\n' % (self.xaxis[i], self.open.real[i], self.open.imag[i], self.short.real[i], self.short.imag[i], self.load.real[i], self.load.imag[i], self.dut.real[i], self.dut.imag[i]))
fh.close()
def write_s1p(self):
dialog = QFileDialog(self, 'Write s1p file', '.', '*.s1p')
dialog.setDefaultSuffix('s1p')
dialog.setAcceptMode(QFileDialog.AcceptSave)
dialog.setOptions(QFileDialog.DontConfirmOverwrite)
if dialog.exec() == QDialog.Accepted:
name = dialog.selectedFiles()
fh = open(name[0], 'w')
gamma = self.gamma()
size = self.sizeValue.value()
fh.write('# GHz S MA R 50\n')
for i in range(0, size):
fh.write('0.0%.8d %8.6f %7.2f\n' % (self.xaxis[i], np.absolute(gamma[i]), np.angle(gamma[i], deg = True)))
fh.close()
def write_s2p(self):
dialog = QFileDialog(self, 'Write s2p file', '.', '*.s2p')
dialog.setDefaultSuffix('s2p')
dialog.setAcceptMode(QFileDialog.AcceptSave)
dialog.setOptions(QFileDialog.DontConfirmOverwrite)
if dialog.exec() == QDialog.Accepted:
name = dialog.selectedFiles()
fh = open(name[0], 'w')
gain = self.gain()
gamma = self.gamma()
size = self.sizeValue.value()
fh.write('# GHz S MA R 50\n')
for i in range(0, size):
fh.write('0.0%.8d %8.6f %7.2f %8.6f %7.2f 0.000000 0.00 0.000000 0.00\n' % (self.xaxis[i], np.absolute(gamma[i]), np.angle(gamma[i], deg = True), np.absolute(gain[i]), np.angle(gain[i], deg = True)))
fh.close()
class VNA(QMainWindow, Ui_VNA):
graphs = ['open', 'short', 'load', 'dut', 'smith', 'imp', 'swr', 'gamma', 'rl', 'gain_short', 'gain_open']
def __init__(self):
super(VNA, self).__init__()
self.setupUi(self)
# IP address validator
rx = QRegExp('^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$')
self.addrValue.setValidator(QRegExpValidator(rx, self.addrValue))
# state variables
self.idle = True
self.reading = False
self.auto = False
# sweep parameters
self.sweep_start = 10
self.sweep_stop = 60000
self.sweep_size = 6000
# buffer and offset for the incoming samples
self.buffer = bytearray(16 * 32768)
self.offset = 0
self.data = np.frombuffer(self.buffer, np.complex64)
# create measurements
self.open = Measurement(self.sweep_start, self.sweep_stop, self.sweep_size)
self.short = Measurement(self.sweep_start, self.sweep_stop, self.sweep_size)
self.load = Measurement(self.sweep_start, self.sweep_stop, self.sweep_size)
self.dut = Measurement(self.sweep_start, self.sweep_stop, self.sweep_size)
self.mode = 'open'
# create figures
self.tabs = {}
for i in range(len(self.graphs)):
layout = getattr(self, '%sLayout' % self.graphs[i])
self.tabs[i] = FigureTab(layout, self)
# configure widgets
self.rateValue.addItems(['10000', '5000', '1000', '500', '100', '50', '10', '5', '1'])
self.rateValue.lineEdit().setReadOnly(True)
self.rateValue.lineEdit().setAlignment(Qt.AlignRight)
for i in range(self.rateValue.count()):
self.rateValue.setItemData(i, Qt.AlignRight, Qt.TextAlignmentRole)
self.set_enabled(False)
self.stopSweep.setEnabled(False)
# read settings
settings = QSettings('vna.ini', QSettings.IniFormat)
self.read_cfg_settings(settings)
# create TCP socket
self.socket = QTcpSocket(self)
self.socket.connected.connect(self.connected)
self.socket.readyRead.connect(self.read_data)
self.socket.error.connect(self.display_error)
# connect signals from widgets
self.connectButton.clicked.connect(self.start)
self.writeButton.clicked.connect(self.write_cfg)
self.readButton.clicked.connect(self.read_cfg)
self.openSweep.clicked.connect(partial(self.sweep, 'open'))
self.shortSweep.clicked.connect(partial(self.sweep, 'short'))
self.loadSweep.clicked.connect(partial(self.sweep, 'load'))
self.singleSweep.clicked.connect(partial(self.sweep, 'dut'))
self.autoSweep.clicked.connect(self.sweep_auto)
self.stopSweep.clicked.connect(self.cancel)
self.csvButton.clicked.connect(self.write_csv)
self.s1pButton.clicked.connect(self.write_s1p)
self.s2pshortButton.clicked.connect(self.write_s2p_short)
self.s2popenButton.clicked.connect(self.write_s2p_open)
self.startValue.valueChanged.connect(self.set_start)
self.stopValue.valueChanged.connect(self.set_stop)
self.sizeValue.valueChanged.connect(self.set_size)
self.rateValue.currentIndexChanged.connect(self.set_rate)
self.corrValue.valueChanged.connect(self.set_corr)
self.phase1Value.valueChanged.connect(self.set_phase1)
self.phase2Value.valueChanged.connect(self.set_phase2)
self.level1Value.valueChanged.connect(self.set_level1)
self.level2Value.valueChanged.connect(self.set_level2)
self.tabWidget.currentChanged.connect(self.update_tab)
# create timers
self.startTimer = QTimer(self)
self.startTimer.timeout.connect(self.timeout)
self.sweepTimer = QTimer(self)
self.sweepTimer.timeout.connect(self.sweep_timeout)
def set_enabled(self, enabled):
widgets = [self.rateValue, self.level1Value, self.level2Value, self.corrValue, self.phase1Value, self.phase2Value, self.startValue, self.stopValue, self.sizeValue, self.openSweep, self.shortSweep, self.loadSweep, self.singleSweep, self.autoSweep]
for entry in widgets:
entry.setEnabled(enabled)
def start(self):
if self.idle:
self.connectButton.setEnabled(False)
self.socket.connectToHost(self.addrValue.text(), 1001)
self.startTimer.start(5000)
else:
self.stop()
def stop(self):
self.idle = True
self.cancel()
self.socket.abort()
self.connectButton.setText('Connect')
self.connectButton.setEnabled(True)
self.set_enabled(False)
self.stopSweep.setEnabled(False)
def timeout(self):
self.display_error('timeout')
def connected(self):
self.startTimer.stop()
self.idle = False
self.set_rate(self.rateValue.currentIndex())
self.set_corr(self.corrValue.value())
self.set_phase1(self.phase1Value.value())
self.set_phase2(self.phase2Value.value())
self.set_level1(self.level1Value.value())
self.set_level2(self.level2Value.value())
self.set_gpio(1)
self.connectButton.setText('Disconnect')
self.connectButton.setEnabled(True)
self.set_enabled(True)
self.stopSweep.setEnabled(True)
def read_data(self):
while(self.socket.bytesAvailable() > 0):
if not self.reading:
self.socket.readAll()
return
size = self.socket.bytesAvailable()
self.progressBar.setValue((self.offset + size) / 16)
limit = 16 * self.sweep_size
if self.offset + size < limit:
self.buffer[self.offset:self.offset + size] = self.socket.read(size)
self.offset += size
else:
self.buffer[self.offset:limit] = self.socket.read(limit - self.offset)
adc1 = self.data[0::2]
adc2 = self.data[1::2]
attr = getattr(self, self.mode)
start = self.sweep_start
stop = self.sweep_stop
size = self.sweep_size
attr.freq = np.linspace(start, stop, size)
attr.data = adc1[0:size].copy()
self.update_tab()
self.reading = False
if not self.auto:
self.progressBar.setValue(0)
self.set_enabled(True)
def display_error(self, socketError):
self.startTimer.stop()
if socketError == 'timeout':
QMessageBox.information(self, 'VNA', 'Error: connection timeout.')
else:
QMessageBox.information(self, 'VNA', 'Error: %s.' % self.socket.errorString())
self.stop()
def set_start(self, value):
self.sweep_start = value
def set_stop(self, value):
self.sweep_stop = value
def set_size(self, value):
self.sweep_size = value
def set_rate(self, value):
if self.idle: return
rate = [5, 10, 50, 100, 500, 1000, 5000, 10000, 50000][value]
self.socket.write(struct.pack('<I', 3<<28 | int(rate)))
def set_corr(self, value):
if self.idle: return
self.socket.write(struct.pack('<I', 4<<28 | int(value)))
def set_phase1(self, value):
if self.idle: return
self.socket.write(struct.pack('<I', 5<<28 | int(value)))
def set_phase2(self, value):
if self.idle: return
self.socket.write(struct.pack('<I', 6<<28 | int(value)))
def set_level1(self, value):
if self.idle: return
data = 0 if value == -90 else int(32766 * np.power(10.0, value / 20.0))
self.socket.write(struct.pack('<I', 7<<28 | int(data)))
def set_level2(self, value):
if self.idle: return
data = 0 if value == -90 else int(32766 * np.power(10.0, value / 20.0))
self.socket.write(struct.pack('<I', 8<<28 | int(data)))
def set_gpio(self, value):
if self.idle: return
self.socket.write(struct.pack('<I', 9<<28 | int(value)))
def sweep(self, mode):
if self.idle: return
self.set_enabled(False)
self.mode = mode
self.offset = 0
self.reading = True
self.socket.write(struct.pack('<I', 0<<28 | int(self.sweep_start * 1000)))
self.socket.write(struct.pack('<I', 1<<28 | int(self.sweep_stop * 1000)))
self.socket.write(struct.pack('<I', 2<<28 | int(self.sweep_size)))
self.socket.write(struct.pack('<I', 10<<28))
self.progressBar.setMinimum(0)
self.progressBar.setMaximum(self.sweep_size)
self.progressBar.setValue(0)
def cancel(self):
self.sweepTimer.stop()
self.auto = False
self.reading = False
self.socket.write(struct.pack('<I', 11<<28))
self.progressBar.setValue(0)
self.set_enabled(True)
def sweep_auto(self):
self.auto = True
self.sweepTimer.start(100)
def sweep_timeout(self):
if not self.reading:
self.sweep('dut')
def update_tab(self):
index = self.tabWidget.currentIndex()
self.tabs[index].update(self.graphs[index])
def interp(self, freq, meas):
real = np.interp(freq, meas.freq, meas.data.real, period = meas.period)
imag = np.interp(freq, meas.freq, meas.data.imag, period = meas.period)
return real + 1j * imag
def gain_short(self, freq):
short = self.interp(freq, self.short)
dut = self.interp(freq, self.dut)
return np.divide(dut, short)
def gain_open(self, freq):
open = self.interp(freq, self.open)
dut = self.interp(freq, self.dut)
return np.divide(dut, open)
def impedance(self, freq):
open = self.interp(freq, self.open)
short = self.interp(freq, self.short)
load = self.interp(freq, self.load)
dut = self.interp(freq, self.dut)
z = np.divide(50.0 * (open - load) * (dut - short), (load - short) * (open - dut))
z = np.asarray(z)
z.real[z.real < 1.0e-2] = 9.99e-3
return z
def gamma(self, freq):
z = self.impedance(freq)
return np.divide(z - 50.0, z + 50.0)
def swr(self, freq):
magnitude = np.absolute(self.gamma(freq))
swr = np.divide(1.0 + magnitude, 1.0 - magnitude)
return np.clip(swr, 1.0, 99.99)
def write_cfg(self):
dialog = QFileDialog(self, 'Write configuration settings', '.', '*.ini')
dialog.setDefaultSuffix('ini')
dialog.selectFile('vna.ini')
dialog.setAcceptMode(QFileDialog.AcceptSave)
dialog.setOptions(QFileDialog.DontConfirmOverwrite)
if dialog.exec() == QDialog.Accepted:
name = dialog.selectedFiles()
settings = QSettings(name[0], QSettings.IniFormat)
self.write_cfg_settings(settings)
def read_cfg(self):
dialog = QFileDialog(self, 'Read configuration settings', '.', '*.ini')
dialog.setDefaultSuffix('ini')
dialog.selectFile('vna.ini')
dialog.setAcceptMode(QFileDialog.AcceptOpen)
if dialog.exec() == QDialog.Accepted:
name = dialog.selectedFiles()
settings = QSettings(name[0], QSettings.IniFormat)
self.read_cfg_settings(settings)
window.update_tab()
def write_cfg_settings(self, settings):
settings.setValue('addr', self.addrValue.text())
settings.setValue('rate', self.rateValue.currentIndex())
settings.setValue('corr', self.corrValue.value())
settings.setValue('phase_1', self.phase1Value.value())
settings.setValue('phase_2', self.phase2Value.value())
settings.setValue('level_1', self.level1Value.value())
settings.setValue('level_2', self.level2Value.value())
settings.setValue('open_start', int(self.open.freq[0]))
settings.setValue('open_stop', int(self.open.freq[-1]))
settings.setValue('open_size', self.open.freq.size)
settings.setValue('short_start', int(self.short.freq[0]))
settings.setValue('short_stop', int(self.short.freq[-1]))
settings.setValue('short_size', self.short.freq.size)
settings.setValue('load_start', int(self.load.freq[0]))
settings.setValue('load_stop', int(self.load.freq[-1]))
settings.setValue('load_size', self.load.freq.size)
settings.setValue('dut_start', int(self.dut.freq[0]))
settings.setValue('dut_stop', int(self.dut.freq[-1]))
settings.setValue('dut_size', self.dut.freq.size)
for i in range(len(FigureTab.cursors)):
settings.setValue('cursor_%d' % i, FigureTab.cursors[i])
data = self.open.data
for i in range(self.open.freq.size):
settings.setValue('open_real_%d' % i, float(data.real[i]))
settings.setValue('open_imag_%d' % i, float(data.imag[i]))
data = self.short.data
for i in range(self.short.freq.size):
settings.setValue('short_real_%d' % i, float(data.real[i]))
settings.setValue('short_imag_%d' % i, float(data.imag[i]))
data = self.load.data
for i in range(self.load.freq.size):
settings.setValue('load_real_%d' % i, float(data.real[i]))
settings.setValue('load_imag_%d' % i, float(data.imag[i]))
data = self.dut.data
for i in range(self.dut.freq.size):
settings.setValue('dut_real_%d' % i, float(data.real[i]))
settings.setValue('dut_imag_%d' % i, float(data.imag[i]))
def read_cfg_settings(self, settings):
self.addrValue.setText(settings.value('addr', '192.168.1.100'))
self.rateValue.setCurrentIndex(settings.value('rate', 0, type = int))
self.corrValue.setValue(settings.value('corr', 0, type = int))
self.phase1Value.setValue(settings.value('phase_1', 0, type = int))
self.phase2Value.setValue(settings.value('phase_2', 0, type = int))
self.level1Value.setValue(settings.value('level_1', 0, type = int))
self.level2Value.setValue(settings.value('level_2', -90, type = int))
open_start = settings.value('open_start', 10, type = int)
open_stop = settings.value('open_stop', 60000, type = int)
open_size = settings.value('open_size', 6000, type = int)
short_start = settings.value('short_start', 10, type = int)
short_stop = settings.value('short_stop', 60000, type = int)
short_size = settings.value('short_size', 6000, type = int)
load_start = settings.value('load_start', 10, type = int)
load_stop = settings.value('load_stop', 60000, type = int)
load_size = settings.value('load_size', 6000, type = int)
dut_start = settings.value('dut_start', 10, type = int)
dut_stop = settings.value('dut_stop', 60000, type = int)
dut_size = settings.value('dut_size', 6000, type = int)
self.startValue.setValue(dut_start)
self.stopValue.setValue(dut_stop)
self.sizeValue.setValue(dut_size)
for i in range(len(FigureTab.cursors)):
FigureTab.cursors[i] = settings.value('cursor_%d' % i, FigureTab.cursors[i], type = int)
self.open.freq = np.linspace(open_start, open_stop, open_size)
self.open.data = np.zeros(open_size, np.complex64)
for i in range(open_size):
real = settings.value('open_real_%d' % i, 0.0, type = float)
imag = settings.value('open_imag_%d' % i, 0.0, type = float)
self.open.data[i] = real + 1.0j * imag
self.short.freq = np.linspace(short_start, short_stop, short_size)
self.short.data = np.zeros(short_size, np.complex64)
for i in range(short_size):
real = settings.value('short_real_%d' % i, 0.0, type = float)
imag = settings.value('short_imag_%d' % i, 0.0, type = float)
self.short.data[i] = real + 1.0j * imag
self.load.freq = np.linspace(load_start, load_stop, load_size)
self.load.data = np.zeros(load_size, np.complex64)
for i in range(load_size):
real = settings.value('load_real_%d' % i, 0.0, type = float)
imag = settings.value('load_imag_%d' % i, 0.0, type = float)
self.load.data[i] = real + 1.0j * imag
self.dut.freq = np.linspace(dut_start, dut_stop, dut_size)
self.dut.data = np.zeros(dut_size, np.complex64)
for i in range(dut_size):
real = settings.value('dut_real_%d' % i, 0.0, type = float)
imag = settings.value('dut_imag_%d' % i, 0.0, type = float)
self.dut.data[i] = real + 1.0j * imag
def write_csv(self):
dialog = QFileDialog(self, 'Write csv file', '.', '*.csv')
dialog.setDefaultSuffix('csv')
dialog.setAcceptMode(QFileDialog.AcceptSave)
dialog.setOptions(QFileDialog.DontConfirmOverwrite)
if dialog.exec() == QDialog.Accepted:
name = dialog.selectedFiles()
fh = open(name[0], 'w')
f = self.dut.freq
o = self.interp(f, self.open)
s = self.interp(f, self.short)
l = self.interp(f, self.load)
d = self.dut.data
fh.write('frequency;open.real;open.imag;short.real;short.imag;load.real;load.imag;dut.real;dut.imag\n')
for i in range(f.size):
fh.write('0.0%.8d;%12.9f;%12.9f;%12.9f;%12.9f;%12.9f;%12.9f;%12.9f;%12.9f\n' % (f[i] * 1000, o.real[i], o.imag[i], s.real[i], s.imag[i], l.real[i], l.imag[i], d.real[i], d.imag[i]))
fh.close()
def write_s1p(self):
dialog = QFileDialog(self, 'Write s1p file', '.', '*.s1p')
dialog.setDefaultSuffix('s1p')
dialog.setAcceptMode(QFileDialog.AcceptSave)
dialog.setOptions(QFileDialog.DontConfirmOverwrite)
if dialog.exec() == QDialog.Accepted:
name = dialog.selectedFiles()
fh = open(name[0], 'w')
freq = self.dut.freq
gamma = self.gamma(freq)
fh.write('# GHz S MA R 50\n')
for i in range(freq.size):
fh.write('0.0%.8d %8.6f %7.2f\n' % (freq[i] * 1000, np.absolute(gamma[i]), np.angle(gamma[i], deg = True)))
fh.close()
def write_s2p(self, gain):
dialog = QFileDialog(self, 'Write s2p file', '.', '*.s2p')
dialog.setDefaultSuffix('s2p')
dialog.setAcceptMode(QFileDialog.AcceptSave)
dialog.setOptions(QFileDialog.DontConfirmOverwrite)
if dialog.exec() == QDialog.Accepted:
name = dialog.selectedFiles()
fh = open(name[0], 'w')
freq = self.dut.freq
gamma = self.gamma(freq)
fh.write('# GHz S MA R 50\n')
for i in range(freq.size):
fh.write('0.0%.8d %8.6f %7.2f %8.6f %7.2f 0.000000 0.00 0.000000 0.00\n' % (freq[i] * 1000, np.absolute(gamma[i]), np.angle(gamma[i], deg = True), np.absolute(gain[i]), np.angle(gain[i], deg = True)))
fh.close()
def write_s2p_short(self):
self.write_s2p(self.gain_short(self.dut.freq))
def write_s2p_open(self):
self.write_s2p(self.gain_open(self.dut.freq))
def __init__(self):
super(VNA, self).__init__()
self.setupUi(self)
# IP address validator
rx = QRegExp('^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$')
self.addrValue.setValidator(QRegExpValidator(rx, self.addrValue))
# state variable
self.idle = True
# sweep parameters
self.sweep_start = 100
self.sweep_stop = 60000
self.sweep_size = 600
self.xaxis, self.sweep_step = np.linspace(self.sweep_start, self.sweep_stop, self.sweep_size, retstep = True)
self.xaxis *= 1000
# buffer and offset for the incoming samples
self.buffer = bytearray(32 * VNA.max_size)
self.offset = 0
self.data = np.frombuffer(self.buffer, np.complex64)
self.adc1 = np.zeros(VNA.max_size, np.complex64)
self.adc2 = np.zeros(VNA.max_size, np.complex64)
self.dac1 = np.zeros(VNA.max_size, np.complex64)
self.open = np.zeros(VNA.max_size, np.complex64)
self.short = np.zeros(VNA.max_size, np.complex64)
self.load = np.zeros(VNA.max_size, np.complex64)
self.dut = np.zeros(VNA.max_size, np.complex64)
self.mode = 'dut'
# create figure
self.figure = Figure()
self.figure.set_facecolor('none')
self.canvas = FigureCanvas(self.figure)
self.plotLayout.addWidget(self.canvas)
# create navigation toolbar
self.toolbar = NavigationToolbar(self.canvas, self.plotWidget, False)
# remove subplots action
actions = self.toolbar.actions()
self.toolbar.removeAction(actions[7])
self.plotLayout.addWidget(self.toolbar)
# create TCP socket
self.socket = QTcpSocket(self)
self.socket.connected.connect(self.connected)
self.socket.readyRead.connect(self.read_data)
self.socket.error.connect(self.display_error)
# connect signals from buttons and boxes
self.sweepFrame.setEnabled(False)
self.dutSweep.setEnabled(False)
self.connectButton.clicked.connect(self.start)
self.writeButton.clicked.connect(self.write_cfg)
self.readButton.clicked.connect(self.read_cfg)
self.openSweep.clicked.connect(self.sweep_open)
self.shortSweep.clicked.connect(self.sweep_short)
self.loadSweep.clicked.connect(self.sweep_load)
self.dutSweep.clicked.connect(self.sweep_dut)
self.s1pButton.clicked.connect(self.write_s1p)
self.startValue.valueChanged.connect(self.set_start)
self.stopValue.valueChanged.connect(self.set_stop)
self.sizeValue.valueChanged.connect(self.set_size)
self.openPlot.clicked.connect(self.plot_open)
self.shortPlot.clicked.connect(self.plot_short)
self.loadPlot.clicked.connect(self.plot_load)
self.dutPlot.clicked.connect(self.plot_dut)
self.smithPlot.clicked.connect(self.plot_smith)
self.impPlot.clicked.connect(self.plot_imp)
self.rcPlot.clicked.connect(self.plot_rc)
self.swrPlot.clicked.connect(self.plot_swr)
self.rlPlot.clicked.connect(self.plot_rl)
# create timer
self.startTimer = QTimer(self)
self.startTimer.timeout.connect(self.timeout)
def __connectNetwork(self, name, connect, silent=False):
"""
Private slot to connect to or disconnect from the given network.
@param name name of the network to connect to (string)
@param connect flag indicating to connect (boolean)
@keyparam silent flag indicating a silent connect/disconnect (boolean)
"""
if connect:
network = self.__ircNetworkManager.getNetwork(name)
if network:
self.__server = network.getServer()
self.__identityName = network.getIdentityName()
identity = self.__ircNetworkManager.getIdentity(
self.__identityName)
self.__userName = identity.getIdent()
self.__quitMessage = identity.getQuitMessage()
if self.__server:
useSSL = self.__server.useSSL()
if useSSL and not SSL_AVAILABLE:
E5MessageBox.critical(
self,
self.tr("SSL Connection"),
self.tr(
"""An encrypted connection to the IRC"""
""" network was requested but SSL is not"""
""" available. Please change the server"""
""" configuration."""))
return
if useSSL:
# create SSL socket
self.__socket = QSslSocket(self)
self.__socket.encrypted.connect(self.__hostConnected)
self.__socket.sslErrors.connect(self.__sslErrors)
else:
# create TCP socket
self.__socket = QTcpSocket(self)
self.__socket.connected.connect(self.__hostConnected)
self.__socket.hostFound.connect(self.__hostFound)
self.__socket.disconnected.connect(self.__hostDisconnected)
self.__socket.readyRead.connect(self.__readyRead)
self.__socket.error.connect(self.__tcpError)
self.__connectionState = IrcWidget.ServerConnecting
if useSSL:
self.networkWidget.addServerMessage(
self.tr("Info"),
self.tr("Looking for server {0} (port {1})"
" using an SSL encrypted connection"
"...").format(self.__server.getName(),
self.__server.getPort()))
self.__socket.connectToHostEncrypted(
self.__server.getName(), self.__server.getPort())
else:
self.networkWidget.addServerMessage(
self.tr("Info"),
self.tr(
"Looking for server {0} (port {1})...").format(
self.__server.getName(),
self.__server.getPort()))
self.__socket.connectToHost(self.__server.getName(),
self.__server.getPort())
else:
if silent:
ok = True
else:
ok = E5MessageBox.yesNo(
self,
self.tr("Disconnect from Server"),
self.tr("""<p>Do you really want to disconnect from"""
""" <b>{0}</b>?</p><p>All channels will be"""
""" closed.</p>""")
.format(self.__server.getName()))
if ok:
self.networkWidget.addServerMessage(
self.tr("Info"),
self.tr("Disconnecting from server {0}...").format(
self.__server.getName()))
self.__closeAllChannels()
self.__send("QUIT :" + self.__quitMessage)
self.__socket and self.__socket.flush()
self.__socket and self.__socket.close()
self.__userName = ""
self.__identityName = ""
self.__quitMessage = ""
class Client(QDialog):
def __init__(self, parent=None):
super(Client, self).__init__(parent)
self.networkSession = None
self.blockSize = 0
self.currentFortune = ""
hostLabel = QLabel("&Server name:")
portLabel = QLabel("S&erver port:")
self.hostCombo = QComboBox()
self.hostCombo.setEditable(True)
name = QHostInfo.localHostName()
if name != "":
self.hostCombo.addItem(name)
domain = QHostInfo.localDomainName()
if domain != "":
self.hostCombo.addItem(name + "." + domain)
if name != "localhost":
self.hostCombo.addItem("localhost")
ipAddressesList = QNetworkInterface.allAddresses()
for ipAddress in ipAddressesList:
if not ipAddress.isLoopback():
self.hostCombo.addItem(ipAddress.toString())
for ipAddress in ipAddressesList:
if ipAddress.isLoopback():
self.hostCombo.addItem(ipAddress.toString())
self.portLineEdit = QLineEdit()
self.portLineEdit.setValidator(QIntValidator(1, 65535, self))
hostLabel.setBuddy(self.hostCombo)
portLabel.setBuddy(self.portLineEdit)
self.statusLabel = QLabel("This examples requires that you run " "the Fortune Server example as well.")
self.getFortuneButton = QPushButton("Get Fortune")
self.getFortuneButton.setDefault(True)
self.getFortuneButton.setEnabled(False)
quitButton = QPushButton("Quit")
buttonBox = QDialogButtonBox()
buttonBox.addButton(self.getFortuneButton, QDialogButtonBox.ActionRole)
buttonBox.addButton(quitButton, QDialogButtonBox.RejectRole)
self.tcpSocket = QTcpSocket(self)
self.hostCombo.editTextChanged.connect(self.enableGetFortuneButton)
self.portLineEdit.textChanged.connect(self.enableGetFortuneButton)
self.getFortuneButton.clicked.connect(self.requestNewFortune)
quitButton.clicked.connect(self.close)
self.tcpSocket.readyRead.connect(self.readFortune)
self.tcpSocket.error.connect(self.displayError)
mainLayout = QGridLayout()
mainLayout.addWidget(hostLabel, 0, 0)
mainLayout.addWidget(self.hostCombo, 0, 1)
mainLayout.addWidget(portLabel, 1, 0)
mainLayout.addWidget(self.portLineEdit, 1, 1)
mainLayout.addWidget(self.statusLabel, 2, 0, 1, 2)
mainLayout.addWidget(buttonBox, 3, 0, 1, 2)
self.setLayout(mainLayout)
self.setWindowTitle("Fortune Client")
self.portLineEdit.setFocus()
manager = QNetworkConfigurationManager()
if manager.capabilities() & QNetworkConfigurationManager.NetworkSessionRequired:
settings = QSettings(QSettings.UserScope, "QtProject")
settings.beginGroup("QtNetwork")
id = settings.value("DefaultNetworkConfiguration")
settings.endGroup()
config = manager.configurationFromIdentifier(id)
if config.state() & QNetworkConfiguration.Discovered == 0:
config = manager.defaultConfiguration()
self.networkSession = QNetworkSession(config, self)
self.networkSession.opened.connect(self.sessionOpened)
self.getFortuneButton.setEnabled(False)
self.statusLabel.setText("Opening network session.")
self.networkSession.open()
def requestNewFortune(self):
self.getFortuneButton.setEnabled(False)
self.blockSize = 0
self.tcpSocket.abort()
self.tcpSocket.connectToHost(self.hostCombo.currentText(), int(self.portLineEdit.text()))
def readFortune(self):
instr = QDataStream(self.tcpSocket)
instr.setVersion(QDataStream.Qt_4_0)
if self.blockSize == 0:
if self.tcpSocket.bytesAvailable() < 2:
return
self.blockSize = instr.readUInt16()
if self.tcpSocket.bytesAvailable() < self.blockSize:
return
nextFortune = instr.readQString()
if nextFortune == self.currentFortune:
QTimer.singleShot(0, self.requestNewFortune)
return
self.currentFortune = nextFortune
self.statusLabel.setText(self.currentFortune)
self.getFortuneButton.setEnabled(True)
def displayError(self, socketError):
if socketError == QAbstractSocket.RemoteHostClosedError:
pass
elif socketError == QAbstractSocket.HostNotFoundError:
QMessageBox.information(
self, "Fortune Client", "The host was not found. Please check the host name and " "port settings."
)
elif socketError == QAbstractSocket.ConnectionRefusedError:
QMessageBox.information(
self,
"Fortune Client",
"The connection was refused by the peer. Make sure the "
"fortune server is running, and check that the host name "
"and port settings are correct.",
)
else:
QMessageBox.information(
self, "Fortune Client", "The following error occurred: %s." % self.tcpSocket.errorString()
)
self.getFortuneButton.setEnabled(True)
def enableGetFortuneButton(self):
self.getFortuneButton.setEnabled(
(self.networkSession is None or self.networkSession.isOpen())
and self.hostCombo.currentText() != ""
and self.portLineEdit.text() != ""
)
def sessionOpened(self):
config = self.networkSession.configuration()
if config.type() == QNetworkConfiguration.UserChoice:
id = self.networkSession.sessionProperty("UserChoiceConfiguration")
else:
id = config.identifier()
settings = QSettings(QSettings.UserScope, "QtProject")
settings.beginGroup("QtNetwork")
settings.setValue("DefaultNetworkConfiguration", id)
settings.endGroup()
self.statusLabel.setText("This examples requires that you run the " "Fortune Server example as well.")
self.enableGetFortuneButton()
def __init__(self):
super(VNA, self).__init__()
self.setupUi(self)
# IP address validator
rx = QRegExp('^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$')
self.addrValue.setValidator(QRegExpValidator(rx, self.addrValue))
# state variables
self.idle = True
self.reading = False
self.auto = False
# sweep parameters
self.sweep_start = 10
self.sweep_stop = 60000
self.sweep_size = 6000
# buffer and offset for the incoming samples
self.buffer = bytearray(16 * 32768)
self.offset = 0
self.data = np.frombuffer(self.buffer, np.complex64)
# create measurements
self.open = Measurement(self.sweep_start, self.sweep_stop, self.sweep_size)
self.short = Measurement(self.sweep_start, self.sweep_stop, self.sweep_size)
self.load = Measurement(self.sweep_start, self.sweep_stop, self.sweep_size)
self.dut = Measurement(self.sweep_start, self.sweep_stop, self.sweep_size)
self.mode = 'open'
# create figures
self.tabs = {}
for i in range(len(self.graphs)):
layout = getattr(self, '%sLayout' % self.graphs[i])
self.tabs[i] = FigureTab(layout, self)
# configure widgets
self.rateValue.addItems(['10000', '5000', '1000', '500', '100', '50', '10', '5', '1'])
self.rateValue.lineEdit().setReadOnly(True)
self.rateValue.lineEdit().setAlignment(Qt.AlignRight)
for i in range(self.rateValue.count()):
self.rateValue.setItemData(i, Qt.AlignRight, Qt.TextAlignmentRole)
self.set_enabled(False)
self.stopSweep.setEnabled(False)
# read settings
settings = QSettings('vna.ini', QSettings.IniFormat)
self.read_cfg_settings(settings)
# create TCP socket
self.socket = QTcpSocket(self)
self.socket.connected.connect(self.connected)
self.socket.readyRead.connect(self.read_data)
self.socket.error.connect(self.display_error)
# connect signals from widgets
self.connectButton.clicked.connect(self.start)
self.writeButton.clicked.connect(self.write_cfg)
self.readButton.clicked.connect(self.read_cfg)
self.openSweep.clicked.connect(partial(self.sweep, 'open'))
self.shortSweep.clicked.connect(partial(self.sweep, 'short'))
self.loadSweep.clicked.connect(partial(self.sweep, 'load'))
self.singleSweep.clicked.connect(partial(self.sweep, 'dut'))
self.autoSweep.clicked.connect(self.sweep_auto)
self.stopSweep.clicked.connect(self.cancel)
self.csvButton.clicked.connect(self.write_csv)
self.s1pButton.clicked.connect(self.write_s1p)
self.s2pshortButton.clicked.connect(self.write_s2p_short)
self.s2popenButton.clicked.connect(self.write_s2p_open)
self.startValue.valueChanged.connect(self.set_start)
self.stopValue.valueChanged.connect(self.set_stop)
self.sizeValue.valueChanged.connect(self.set_size)
self.rateValue.currentIndexChanged.connect(self.set_rate)
self.corrValue.valueChanged.connect(self.set_corr)
self.phase1Value.valueChanged.connect(self.set_phase1)
self.phase2Value.valueChanged.connect(self.set_phase2)
self.level1Value.valueChanged.connect(self.set_level1)
self.level2Value.valueChanged.connect(self.set_level2)
self.tabWidget.currentChanged.connect(self.update_tab)
# create timers
self.startTimer = QTimer(self)
self.startTimer.timeout.connect(self.timeout)
self.sweepTimer = QTimer(self)
self.sweepTimer.timeout.connect(self.sweep_timeout)
class IrcWidget(QWidget, Ui_IrcWidget):
"""
Class implementing the IRC window.
@signal autoConnected() emitted after an automatic connection was initiated
"""
autoConnected = pyqtSignal()
ServerDisconnected = 1
ServerConnected = 2
ServerConnecting = 3
def __init__(self, parent=None):
"""
Constructor
@param parent reference to the parent widget (QWidget)
"""
super(IrcWidget, self).__init__(parent)
self.setupUi(self)
from .IrcNetworkManager import IrcNetworkManager
self.__ircNetworkManager = IrcNetworkManager(self)
self.__leaveButton = QToolButton(self)
self.__leaveButton.setIcon(
UI.PixmapCache.getIcon("ircCloseChannel.png"))
self.__leaveButton.setToolTip(
self.tr("Press to leave the current channel"))
self.__leaveButton.clicked.connect(self.__leaveChannel)
self.__leaveButton.setEnabled(False)
self.channelsWidget.setCornerWidget(
self.__leaveButton, Qt.BottomRightCorner)
self.channelsWidget.setTabsClosable(False)
if not isMacPlatform():
self.channelsWidget.setTabPosition(QTabWidget.South)
height = self.height()
self.splitter.setSizes([height * 0.6, height * 0.4])
self.__channelList = []
self.__channelTypePrefixes = ""
self.__userName = ""
self.__identityName = ""
self.__quitMessage = ""
self.__nickIndex = -1
self.__nickName = ""
self.__server = None
self.__registering = False
self.__connectionState = IrcWidget.ServerDisconnected
self.__sslErrorLock = False
self.__buffer = ""
self.__userPrefix = {}
self.__socket = None
if SSL_AVAILABLE:
self.__sslErrorHandler = E5SslErrorHandler(self)
else:
self.__sslErrorHandler = None
self.__patterns = [
# :[email protected] PRIVMSG bar_ :some long message
(re.compile(r":([^!]+)!([^ ]+)\sPRIVMSG\s([^ ]+)\s:(.*)"),
self.__query),
# :foo.bar.net COMMAND some message
(re.compile(r""":([^ ]+)\s+([A-Z]+)\s+(.+)"""),
self.__handleNamedMessage),
# :foo.bar.net 123 * :info
(re.compile(r""":([^ ]+)\s+(\d{3})\s+(.+)"""),
self.__handleNumericMessage),
# PING :ping message
(re.compile(r"""PING\s+:(.*)"""), self.__ping),
]
self.__prefixRe = re.compile(r""".*\sPREFIX=\((.*)\)([^ ]+).*""")
self.__chanTypesRe = re.compile(r""".*\sCHANTYPES=([^ ]+).*""")
ircPic = UI.PixmapCache.getPixmap("irc128.png")
self.__emptyLabel = QLabel()
self.__emptyLabel.setPixmap(ircPic)
self.__emptyLabel.setAlignment(Qt.AlignVCenter | Qt.AlignHCenter)
self.channelsWidget.addTab(self.__emptyLabel, "")
# all initialized, do connections now
self.__ircNetworkManager.dataChanged.connect(self.__networkDataChanged)
self.networkWidget.initialize(self.__ircNetworkManager)
self.networkWidget.connectNetwork.connect(self.__connectNetwork)
self.networkWidget.editNetwork.connect(self.__editNetwork)
self.networkWidget.joinChannel.connect(self.__joinChannel)
self.networkWidget.nickChanged.connect(self.__changeNick)
self.networkWidget.sendData.connect(self.__send)
self.networkWidget.away.connect(self.__away)
self.networkWidget.autoConnected.connect(self.autoConnected)
def shutdown(self):
"""
Public method to shut down the widget.
@return flag indicating successful shutdown (boolean)
"""
if self.__server:
if Preferences.getIrc("AskOnShutdown"):
ok = E5MessageBox.yesNo(
self,
self.tr("Disconnect from Server"),
self.tr(
"""<p>Do you really want to disconnect from"""
""" <b>{0}</b>?</p><p>All channels will be closed."""
"""</p>""").format(self.__server.getName()))
else:
ok = True
if ok:
self.__socket.blockSignals(True)
self.__send("QUIT :" + self.__quitMessage)
self.__socket.flush()
self.__socket.close()
self.__socket.deleteLater()
self.__socket = None
else:
ok = True
if ok:
self.__ircNetworkManager.close()
return ok
def autoConnect(self):
"""
Public method to initiate the IRC auto connection.
"""
self.networkWidget.autoConnect()
def __connectNetwork(self, name, connect, silent=False):
"""
Private slot to connect to or disconnect from the given network.
@param name name of the network to connect to (string)
@param connect flag indicating to connect (boolean)
@keyparam silent flag indicating a silent connect/disconnect (boolean)
"""
if connect:
network = self.__ircNetworkManager.getNetwork(name)
if network:
self.__server = network.getServer()
self.__identityName = network.getIdentityName()
identity = self.__ircNetworkManager.getIdentity(
self.__identityName)
self.__userName = identity.getIdent()
self.__quitMessage = identity.getQuitMessage()
if self.__server:
useSSL = self.__server.useSSL()
if useSSL and not SSL_AVAILABLE:
E5MessageBox.critical(
self,
self.tr("SSL Connection"),
self.tr(
"""An encrypted connection to the IRC"""
""" network was requested but SSL is not"""
""" available. Please change the server"""
""" configuration."""))
return
if useSSL:
# create SSL socket
self.__socket = QSslSocket(self)
self.__socket.encrypted.connect(self.__hostConnected)
self.__socket.sslErrors.connect(self.__sslErrors)
else:
# create TCP socket
self.__socket = QTcpSocket(self)
self.__socket.connected.connect(self.__hostConnected)
self.__socket.hostFound.connect(self.__hostFound)
self.__socket.disconnected.connect(self.__hostDisconnected)
self.__socket.readyRead.connect(self.__readyRead)
self.__socket.error.connect(self.__tcpError)
self.__connectionState = IrcWidget.ServerConnecting
if useSSL:
self.networkWidget.addServerMessage(
self.tr("Info"),
self.tr("Looking for server {0} (port {1})"
" using an SSL encrypted connection"
"...").format(self.__server.getName(),
self.__server.getPort()))
self.__socket.connectToHostEncrypted(
self.__server.getName(), self.__server.getPort())
else:
self.networkWidget.addServerMessage(
self.tr("Info"),
self.tr(
"Looking for server {0} (port {1})...").format(
self.__server.getName(),
self.__server.getPort()))
self.__socket.connectToHost(self.__server.getName(),
self.__server.getPort())
else:
if silent:
ok = True
else:
ok = E5MessageBox.yesNo(
self,
self.tr("Disconnect from Server"),
self.tr("""<p>Do you really want to disconnect from"""
""" <b>{0}</b>?</p><p>All channels will be"""
""" closed.</p>""")
.format(self.__server.getName()))
if ok:
self.networkWidget.addServerMessage(
self.tr("Info"),
self.tr("Disconnecting from server {0}...").format(
self.__server.getName()))
self.__closeAllChannels()
self.__send("QUIT :" + self.__quitMessage)
self.__socket and self.__socket.flush()
self.__socket and self.__socket.close()
self.__userName = ""
self.__identityName = ""
self.__quitMessage = ""
def __editNetwork(self, name):
"""
Private slot to edit the network configuration.
@param name name of the network to edit (string)
"""
from .IrcNetworkListDialog import IrcNetworkListDialog
dlg = IrcNetworkListDialog(self.__ircNetworkManager, self)
dlg.exec_()
def __networkDataChanged(self):
"""
Private slot handling changes of the network and identity definitions.
"""
identity = self.__ircNetworkManager.getIdentity(self.__identityName)
if identity:
partMsg = identity.getPartMessage()
for channel in self.__channelList:
channel.setPartMessage(partMsg)
def __joinChannel(self, name, key=""):
"""
Private slot to join a channel.
@param name name of the channel (string)
@param key key of the channel (string)
"""
# step 1: check, if this channel is already joined
for channel in self.__channelList:
if channel.name() == name:
return
from .IrcChannelWidget import IrcChannelWidget
channel = IrcChannelWidget(self)
channel.setName(name)
channel.setUserName(self.__nickName)
identity = self.__ircNetworkManager.getIdentity(self.__identityName)
channel.setPartMessage(identity.getPartMessage())
channel.setUserPrivilegePrefix(self.__userPrefix)
channel.initAutoWho()
channel.sendData.connect(self.__send)
channel.sendCtcpReply.connect(self.__sendCtcpReply)
channel.channelClosed.connect(self.__closeChannel)
channel.openPrivateChat.connect(self.__openPrivate)
self.channelsWidget.addTab(channel, name)
self.__channelList.append(channel)
self.channelsWidget.setCurrentWidget(channel)
joinCommand = ["JOIN", name]
if key:
joinCommand.append(key)
self.__send(" ".join(joinCommand))
self.__send("MODE " + name)
emptyIndex = self.channelsWidget.indexOf(self.__emptyLabel)
if emptyIndex > -1:
self.channelsWidget.removeTab(emptyIndex)
self.__leaveButton.setEnabled(True)
self.channelsWidget.setTabsClosable(True)
def __query(self, match):
"""
Private method to handle a new private connection.
@param match reference to the match object
@return flag indicating, if the message was handled (boolean)
"""
# group(1) sender user name
# group(2) sender user@host
# group(3) target nick
# group(4) message
if match.group(4).startswith("\x01"):
return self.__handleCtcp(match)
self.__openPrivate(match.group(1))
# the above call sets the new channel as the current widget
channel = self.channelsWidget.currentWidget()
channel.addMessage(match.group(1), match.group(4))
channel.setPrivateInfo(
"{0} - {1}".format(match.group(1), match.group(2)))
return True
@pyqtSlot(str)
def __openPrivate(self, name):
"""
Private slot to open a private chat with the given user.
@param name name of the user (string)
"""
from .IrcChannelWidget import IrcChannelWidget
channel = IrcChannelWidget(self)
channel.setName(self.__nickName)
channel.setUserName(self.__nickName)
identity = self.__ircNetworkManager.getIdentity(self.__identityName)
channel.setPartMessage(identity.getPartMessage())
channel.setUserPrivilegePrefix(self.__userPrefix)
channel.setPrivate(True, name)
channel.addUsers([name, self.__nickName])
channel.sendData.connect(self.__send)
channel.sendCtcpReply.connect(self.__sendCtcpReply)
channel.channelClosed.connect(self.__closeChannel)
self.channelsWidget.addTab(channel, name)
self.__channelList.append(channel)
self.channelsWidget.setCurrentWidget(channel)
@pyqtSlot()
def __leaveChannel(self):
"""
Private slot to leave a channel and close the associated tab.
"""
channel = self.channelsWidget.currentWidget()
channel.requestLeave()
def __closeAllChannels(self):
"""
Private method to close all channels.
"""
while self.__channelList:
channel = self.__channelList.pop()
self.channelsWidget.removeTab(self.channelsWidget.indexOf(channel))
channel.deleteLater()
channel = None
self.channelsWidget.addTab(self.__emptyLabel, "")
self.__emptyLabel.show()
self.__leaveButton.setEnabled(False)
self.channelsWidget.setTabsClosable(False)
def __closeChannel(self, name):
"""
Private slot handling the closing of a channel.
@param name name of the closed channel (string)
"""
for channel in self.__channelList:
if channel.name() == name:
self.channelsWidget.removeTab(
self.channelsWidget.indexOf(channel))
self.__channelList.remove(channel)
channel.deleteLater()
if self.channelsWidget.count() == 0:
self.channelsWidget.addTab(self.__emptyLabel, "")
self.__emptyLabel.show()
self.__leaveButton.setEnabled(False)
self.channelsWidget.setTabsClosable(False)
@pyqtSlot(int)
def on_channelsWidget_tabCloseRequested(self, index):
"""
Private slot to close a channel by pressing the close button of
the channels widget.
@param index index of the tab to be closed (integer)
"""
channel = self.channelsWidget.widget(index)
channel.requestLeave()
def __send(self, data):
"""
Private slot to send data to the IRC server.
@param data data to be sent (string)
"""
if self.__socket:
self.__socket.write(
QByteArray("{0}\r\n".format(data).encode("utf-8")))
def __sendCtcpReply(self, receiver, text):
"""
Private slot to send a CTCP reply.
@param receiver nick name of the receiver (string)
@param text text to be sent (string)
"""
self.__send("NOTICE {0} :\x01{1}\x01".format(receiver, text))
def __hostFound(self):
"""
Private slot to indicate the host was found.
"""
self.networkWidget.addServerMessage(
self.tr("Info"),
self.tr("Server found,connecting..."))
def __hostConnected(self):
"""
Private slot to log in to the server after the connection was
established.
"""
self.networkWidget.addServerMessage(
self.tr("Info"),
self.tr("Connected,logging in..."))
self.networkWidget.setConnected(True)
self.__registering = True
serverPassword = self.__server.getPassword()
if serverPassword:
self.__send("PASS " + serverPassword)
nick = self.networkWidget.getNickname()
if not nick:
self.__nickIndex = 0
try:
nick = self.__ircNetworkManager.getIdentity(
self.__identityName).getNickNames()[self.__nickIndex]
except IndexError:
nick = ""
if not nick:
nick = self.__userName
self.__nickName = nick
self.networkWidget.setNickName(nick)
realName = self.__ircNetworkManager.getIdentity(
self.__identityName).getRealName()
if not realName:
realName = "eric IDE chat"
self.__send("NICK " + nick)
self.__send("USER " + self.__userName + " 0 * :" + realName)
def __hostDisconnected(self):
"""
Private slot to indicate the host was disconnected.
"""
if self.networkWidget.isConnected():
self.__closeAllChannels()
self.networkWidget.addServerMessage(
self.tr("Info"),
self.tr("Server disconnected."))
self.networkWidget.setRegistered(False)
self.networkWidget.setConnected(False)
self.__server = None
self.__nickName = ""
self.__nickIndex = -1
self.__channelTypePrefixes = ""
self.__socket.deleteLater()
self.__socket = None
self.__connectionState = IrcWidget.ServerDisconnected
self.__sslErrorLock = False
def __readyRead(self):
"""
Private slot to read data from the socket.
"""
if self.__socket:
self.__buffer += str(
self.__socket.readAll(),
Preferences.getSystem("IOEncoding"),
'replace')
if self.__buffer.endswith("\r\n"):
for line in self.__buffer.splitlines():
line = line.strip()
if line:
logging.debug("<IRC> " + line)
handled = False
# step 1: give channels a chance to handle the message
for channel in self.__channelList:
handled = channel.handleMessage(line)
if handled:
break
else:
# step 2: try to process the message ourselves
for patternRe, patternFunc in self.__patterns:
match = patternRe.match(line)
if match is not None:
if patternFunc(match):
break
else:
# Oops, the message wasn't handled
self.networkWidget.addErrorMessage(
self.tr("Message Error"),
self.tr(
"Unknown message received from server:"
"<br/>{0}").format(line))
self.__updateUsersCount()
self.__buffer = ""
def __handleNamedMessage(self, match):
"""
Private method to handle a server message containing a message name.
@param match reference to the match object
@return flag indicating, if the message was handled (boolean)
"""
name = match.group(2)
if name == "NOTICE":
try:
msg = match.group(3).split(":", 1)[1]
except IndexError:
msg = match.group(3)
if "!" in match.group(1):
name = match.group(1).split("!", 1)[0]
msg = "-{0}- {1}".format(name, msg)
self.networkWidget.addServerMessage(self.tr("Notice"), msg)
return True
elif name == "MODE":
self.__registering = False
if ":" in match.group(3):
# :detlev_ MODE detlev_ :+i
name, modes = match.group(3).split(" :")
sourceNick = match.group(1)
if not self.isChannelName(name):
if name == self.__nickName:
if sourceNick == self.__nickName:
msg = self.tr(
"You have set your personal modes to"
" <b>[{0}]</b>.").format(modes)
else:
msg = self.tr(
"{0} has changed your personal modes to"
" <b>[{1}]</b>.").format(sourceNick, modes)
self.networkWidget.addServerMessage(
self.tr("Mode"), msg, filterMsg=False)
return True
elif name == "PART":
nick = match.group(1).split("!", 1)[0]
if nick == self.__nickName:
channel = match.group(3).split(None, 1)[0]
self.networkWidget.addMessage(
self.tr("You have left channel {0}.").format(channel))
return True
elif name == "QUIT":
# don't do anything with it here
return True
elif name == "NICK":
# :[email protected] NICK :newnick
oldNick = match.group(1).split("!", 1)[0]
newNick = match.group(3).split(":", 1)[1]
if oldNick == self.__nickName:
self.networkWidget.addMessage(
self.tr("You are now known as {0}.").format(newNick))
self.__nickName = newNick
self.networkWidget.setNickName(newNick)
else:
self.networkWidget.addMessage(
self.tr("User {0} is now known as {1}.").format(
oldNick, newNick))
return True
elif name == "ERROR":
self.networkWidget.addErrorMessage(
self.tr("Server Error"), match.group(3).split(":", 1)[1])
return True
return False
def __handleNumericMessage(self, match):
"""
Private method to handle a server message containing a numeric code.
@param match reference to the match object
@return flag indicating, if the message was handled (boolean)
"""
code = int(match.group(2))
if code < 400:
return self.__handleServerReply(
code, match.group(1), match.group(3))
else:
return self.__handleServerError(
code, match.group(1), match.group(3))
def __handleServerError(self, code, server, message):
"""
Private slot to handle a server error reply.
@param code numerical code sent by the server (integer)
@param server name of the server (string)
@param message message sent by the server (string)
@return flag indicating, if the message was handled (boolean)
"""
if code == 433:
if self.__registering:
self.__handleNickInUseLogin()
else:
self.__handleNickInUse()
else:
self.networkWidget.addServerMessage(self.tr("Error"), message)
return True
def __handleServerReply(self, code, server, message):
"""
Private slot to handle a server reply.
@param code numerical code sent by the server (integer)
@param server name of the server (string)
@param message message sent by the server (string)
@return flag indicating, if the message was handled (boolean)
"""
# determine message type
if code in [1, 2, 3, 4]:
msgType = self.tr("Welcome")
elif code == 5:
msgType = self.tr("Support")
elif code in [250, 251, 252, 253, 254, 255, 265, 266]:
msgType = self.tr("User")
elif code in [372, 375, 376]:
msgType = self.tr("MOTD")
elif code in [305, 306]:
msgType = self.tr("Away")
else:
msgType = self.tr("Info ({0})").format(code)
# special treatment for some messages
if code == 375:
message = self.tr("Message of the day")
elif code == 376:
message = self.tr("End of message of the day")
elif code == 4:
parts = message.strip().split()
message = self.tr(
"Server {0} (Version {1}), User-Modes: {2},"
" Channel-Modes: {3}")\
.format(parts[1], parts[2], parts[3], parts[4])
elif code == 265:
parts = message.strip().split()
message = self.tr(
"Current users on {0}: {1}, max. {2}").format(
server, parts[1], parts[2])
elif code == 266:
parts = message.strip().split()
message = self.tr(
"Current users on the network: {0}, max. {1}").format(
parts[1], parts[2])
elif code == 305:
message = self.tr("You are no longer marked as being away.")
elif code == 306:
message = self.tr("You have been marked as being away.")
else:
first, message = message.split(None, 1)
if message.startswith(":"):
message = message[1:]
else:
message = message.replace(":", "", 1)
self.networkWidget.addServerMessage(msgType, message)
if code == 1:
# register with services after the welcome message
self.__connectionState = IrcWidget.ServerConnected
self.__registerWithServices()
self.networkWidget.setRegistered(True)
QTimer.singleShot(1000, self.__autoJoinChannels)
elif code == 5:
# extract the user privilege prefixes
# ... PREFIX=(ov)@+ ...
m = self.__prefixRe.match(message)
if m:
self.__setUserPrivilegePrefix(m.group(1), m.group(2))
# extract the channel type prefixes
# ... CHANTYPES=# ...
m = self.__chanTypesRe.match(message)
if m:
self.__setChannelTypePrefixes(m.group(1))
return True
def __registerWithServices(self):
"""
Private method to register to services.
"""
identity = self.__ircNetworkManager.getIdentity(self.__identityName)
service = identity.getServiceName()
password = identity.getPassword()
if service and password:
self.__send("PRIVMSG " + service + " :identify " + password)
def __autoJoinChannels(self):
"""
Private slot to join channels automatically once a server got
connected.
"""
for channel in self.networkWidget.getNetworkChannels():
if channel.autoJoin():
name = channel.getName()
key = channel.getKey()
self.__joinChannel(name, key)
def __tcpError(self, error):
"""
Private slot to handle errors reported by the TCP socket.
@param error error code reported by the socket
(QAbstractSocket.SocketError)
"""
if error == QAbstractSocket.RemoteHostClosedError:
# ignore this one, it's a disconnect
if self.__sslErrorLock:
self.networkWidget.addErrorMessage(
self.tr("SSL Error"),
self.tr(
"""Connection to server {0} (port {1}) lost while"""
""" waiting for user response to an SSL error.""")
.format(self.__server.getName(), self.__server.getPort()))
self.__connectionState = IrcWidget.ServerDisconnected
elif error == QAbstractSocket.HostNotFoundError:
self.networkWidget.addErrorMessage(
self.tr("Socket Error"),
self.tr(
"The host was not found. Please check the host name"
" and port settings."))
elif error == QAbstractSocket.ConnectionRefusedError:
self.networkWidget.addErrorMessage(
self.tr("Socket Error"),
self.tr(
"The connection was refused by the peer. Please check the"
" host name and port settings."))
elif error == QAbstractSocket.SslHandshakeFailedError:
self.networkWidget.addErrorMessage(
self.tr("Socket Error"),
self.tr("The SSL handshake failed."))
else:
if self.__socket:
self.networkWidget.addErrorMessage(
self.tr("Socket Error"),
self.tr(
"The following network error occurred:<br/>{0}")
.format(self.__socket.errorString()))
else:
self.networkWidget.addErrorMessage(
self.tr("Socket Error"),
self.tr("A network error occurred."))
def __sslErrors(self, errors):
"""
Private slot to handle SSL errors.
@param errors list of SSL errors (list of QSslError)
"""
ignored, defaultChanged = self.__sslErrorHandler.sslErrors(
errors, self.__server.getName(), self.__server.getPort())
if ignored == E5SslErrorHandler.NotIgnored:
self.networkWidget.addErrorMessage(
self.tr("SSL Error"),
self.tr(
"""Could not connect to {0} (port {1}) using an SSL"""
""" encrypted connection. Either the server does not"""
""" support SSL (did you use the correct port?) or"""
""" you rejected the certificate.""")
.format(self.__server.getName(), self.__server.getPort()))
self.__socket.close()
else:
if defaultChanged:
self.__socket.setSslConfiguration(
QSslConfiguration.defaultConfiguration())
if ignored == E5SslErrorHandler.UserIgnored:
self.networkWidget.addErrorMessage(
self.tr("SSL Error"),
self.tr(
"""The SSL certificate for the server {0} (port {1})"""
""" failed the authenticity check. SSL errors"""
""" were accepted by you.""")
.format(self.__server.getName(), self.__server.getPort()))
if self.__connectionState == IrcWidget.ServerConnecting:
self.__socket.ignoreSslErrors()
def __setUserPrivilegePrefix(self, prefix1, prefix2):
"""
Private method to set the user privilege prefix.
@param prefix1 first part of the prefix (string)
@param prefix2 indictors the first part gets mapped to (string)
"""
# PREFIX=(ov)@+
# o = @ -> @ircbot , channel operator
# v = + -> +userName , voice operator
for i in range(len(prefix1)):
self.__userPrefix["+" + prefix1[i]] = prefix2[i]
self.__userPrefix["-" + prefix1[i]] = ""
def __ping(self, match):
"""
Private method to handle a PING message.
@param match reference to the match object
@return flag indicating, if the message was handled (boolean)
"""
self.__send("PONG " + match.group(1))
return True
def __handleCtcp(self, match):
"""
Private method to handle a CTCP command.
@param match reference to the match object
@return flag indicating, if the message was handled (boolean)
"""
# group(1) sender user name
# group(2) sender user@host
# group(3) target nick
# group(4) message
if match.group(4).startswith("\x01"):
ctcpCommand = match.group(4)[1:].split("\x01", 1)[0]
if " " in ctcpCommand:
ctcpRequest, ctcpArg = ctcpCommand.split(" ", 1)
else:
ctcpRequest, ctcpArg = ctcpCommand, ""
ctcpRequest = ctcpRequest.lower()
if ctcpRequest == "version":
if Version.startswith("@@"):
vers = ""
else:
vers = " " + Version
msg = "Eric IRC client{0}, {1}".format(vers, Copyright)
self.networkWidget.addServerMessage(
self.tr("CTCP"),
self.tr("Received Version request from {0}.").format(
match.group(1)))
self.__sendCtcpReply(match.group(1), "VERSION " + msg)
elif ctcpRequest == "ping":
self.networkWidget.addServerMessage(
self.tr("CTCP"),
self.tr(
"Received CTCP-PING request from {0},"
" sending answer.").format(match.group(1)))
self.__sendCtcpReply(
match.group(1), "PING {0}".format(ctcpArg))
elif ctcpRequest == "clientinfo":
self.networkWidget.addServerMessage(
self.tr("CTCP"),
self.tr(
"Received CTCP-CLIENTINFO request from {0},"
" sending answer.").format(match.group(1)))
self.__sendCtcpReply(
match.group(1),
"CLIENTINFO CLIENTINFO PING VERSION")
else:
self.networkWidget.addServerMessage(
self.tr("CTCP"),
self.tr(
"Received unknown CTCP-{0} request from {1}.")
.format(ctcpRequest, match.group(1)))
return True
return False
def __updateUsersCount(self):
"""
Private method to update the users count on the channel tabs.
"""
for channel in self.__channelList:
index = self.channelsWidget.indexOf(channel)
self.channelsWidget.setTabText(
index,
self.tr("{0} ({1})", "channel name, users count").format(
channel.name(), channel.getUsersCount()))
def __handleNickInUseLogin(self):
"""
Private method to handle a 443 server error at login.
"""
self.__nickIndex += 1
try:
nick = self.__ircNetworkManager.getIdentity(self.__identityName)\
.getNickNames()[self.__nickIndex]
self.__nickName = nick
except IndexError:
self.networkWidget.addServerMessage(
self.tr("Critical"),
self.tr(
"No nickname acceptable to the server configured"
" for <b>{0}</b>. Disconnecting...")
.format(self.__userName),
filterMsg=False)
self.__connectNetwork("", False, silent=True)
self.__nickName = ""
self.__nickIndex = -1
return
self.networkWidget.setNickName(nick)
self.__send("NICK " + nick)
def __handleNickInUse(self):
"""
Private method to handle a 443 server error.
"""
self.networkWidget.addServerMessage(
self.tr("Critical"),
self.tr("The given nickname is already in use."))
def __changeNick(self, nick):
"""
Private slot to use a new nick name.
@param nick nick name to use (str)
"""
if nick and nick != self.__nickName:
self.__send("NICK " + nick)
def __setChannelTypePrefixes(self, prefixes):
"""
Private method to set the channel type prefixes.
@param prefixes channel prefix characters (string)
"""
self.__channelTypePrefixes = prefixes
def isChannelName(self, name):
"""
Public method to check, if the given name is a channel name.
@param name name to check (string)
@return flag indicating a channel name (boolean)
"""
if not name:
return False
if self.__channelTypePrefixes:
return name[0] in self.__channelTypePrefixes
else:
return name[0] in "#&"
def __away(self, isAway):
"""
Private slot handling the change of the away state.
@param isAway flag indicating the current away state (boolean)
"""
if isAway and self.__identityName:
identity = self.__ircNetworkManager.getIdentity(
self.__identityName)
if identity.rememberAwayPosition():
for channel in self.__channelList:
channel.setMarkerLine()
class MainWindow(QtWidgets.QMainWindow):
def __init__(self, args):
super().__init__()
self.socket = QTcpSocket()
self.socket.connectToHost('localhost', args.port)
self.socket.readyRead.connect(self.readFromEmotool)
self.setAttribute(QtCore.Qt.WA_DeleteOnClose)
self.setWindowTitle("EmoTool - {}".format(version()))
self.main_widget = QtWidgets.QTabWidget(self)
plot_tab = QtWidgets.QWidget(self.main_widget)
self.main_widget.addTab(plot_tab, "plot")
l = QtWidgets.QVBoxLayout(plot_tab)
self.plot_widget = plot_widget = pg.PlotWidget()
l.addWidget(plot_widget)
self.plot_widget = plot_widget
# TODO - make a menu action, not open by default
c = pg.console.ConsoleWidget(namespace=globals(), text="test console")
self.main_widget.addTab(c, "debug")
self.main_widget.setFocus()
self.setCentralWidget(self.main_widget)
self.statusBar().showMessage("Starting", 2000)
self.ticks = defaultdict(list)
self.vals = defaultdict(list)
self.data_items = defaultdict(pg.PlotDataItem)
self.incoming = b''
self.next_message_size = None
@coalesce_meth(10) # Limit refreshes, they can be costly
def log_variables(self, msgs):
"""
Show points on log window. both @ticks and @vars are arrays
:param msgs: [(ticks_scalar, [(name, value)])]
:return:
"""
new_ticks, new_vals = to_dicts(msgs)
# TODO - better logic. Right now just shows last second, no zoom in possible. Plus second[ticks] is fixed
last_tick = msgs[-1][0]
cutoff_tick = last_tick - 8000
for name in set(self.ticks.keys()) | set(new_ticks.keys()):
if name not in self.data_items:
item = self.data_items[name]
self.plot_widget.addItem(item)
else:
item = self.data_items[name]
ticks = self.ticks[name]
vals = self.vals[name]
i_cutoff = bisect_left(ticks, cutoff_tick)
del ticks[:i_cutoff]
del vals[:i_cutoff]
ticks.extend(new_ticks[name])
vals.extend(new_vals[name])
item.setData(ticks, vals)
first_tick = min([ticks[0] for ticks in self.ticks.values()])
self.plot_widget.setXRange(first_tick, last_tick)
def readFromEmotool(self):
"""
This is a temporary measure - instead of the better solution:
serial2tcp process <-> app
We have
serial2tcp process <-> emotool <-> app
Just to avoid rewriting the emotool parts to drop asyncio support so they can be reused for app and emotool.
Quick transport costs calculation (copy cost):
20000 msg/second
msg size < 100 bytes
< 2 MB /second
"""
self.incoming += self.socket.readAll()
N = len(self.incoming)
i = 0
messages = []
while i < N:
if self.next_message_size is None:
if N - i < SIZEOF_UINT32:
break
self.next_message_size, = unpack('<i', self.incoming[i : i + SIZEOF_UINT32])
i += SIZEOF_UINT32
if self.next_message_size > N - i:
break
data = self.incoming[i : i + self.next_message_size]
i += self.next_message_size
messages.extend(loads(data))
self.next_message_size = None
self.incoming = self.incoming[i:]
if len(messages) > 0:
self.log_variables(messages)
def fileQuit(self):
self.close()
def closeEvent(self, ce):
self.fileQuit()
class Scanner(QMainWindow, Ui_Scanner):
def __init__(self):
super(Scanner, self).__init__()
self.setupUi(self)
# IP address validator
rx = QRegExp('^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$')
self.addrValue.setValidator(QRegExpValidator(rx, self.addrValue))
# state variable
self.idle = True
# number of samples to show on the plot
self.size = 512 * 512
self.freq = 143.0
# buffer and offset for the incoming samples
self.buffer = bytearray(8 * self.size)
self.offset = 0
self.data = np.frombuffer(self.buffer, np.int32)
# create figure
figure = Figure()
figure.set_facecolor('none')
self.axes = figure.add_subplot(111)
self.canvas = FigureCanvas(figure)
self.plotLayout.addWidget(self.canvas)
self.axes.axis((0.0, 512.0, 0.0, 512.0))
x, y = np.meshgrid(np.linspace(0.0, 512.0, 513), np.linspace(0.0, 512.0, 513))
z = x / 512.0 + y * 0.0
self.mesh = self.axes.pcolormesh(x, y, z, cmap = cm.plasma)
# create navigation toolbar
self.toolbar = NavigationToolbar(self.canvas, self.plotWidget, False)
# remove subplots action
actions = self.toolbar.actions()
if int(matplotlib.__version__[0]) < 2:
self.toolbar.removeAction(actions[7])
else:
self.toolbar.removeAction(actions[6])
self.plotLayout.addWidget(self.toolbar)
# create TCP socket
self.socket = QTcpSocket(self)
self.socket.connected.connect(self.connected)
self.socket.readyRead.connect(self.read_data)
self.socket.error.connect(self.display_error)
# connect signals from buttons and boxes
self.connectButton.clicked.connect(self.start)
self.scanButton.clicked.connect(self.scan)
self.periodValue.valueChanged.connect(self.set_period)
self.trgtimeValue.valueChanged.connect(self.set_trgtime)
self.trginvCheck.stateChanged.connect(self.set_trginv)
self.shdelayValue.valueChanged.connect(self.set_shdelay)
self.shtimeValue.valueChanged.connect(self.set_shtime)
self.shinvCheck.stateChanged.connect(self.set_shinv)
self.acqdelayValue.valueChanged.connect(self.set_acqdelay)
self.samplesValue.valueChanged.connect(self.set_samples)
self.pulsesValue.valueChanged.connect(self.set_pulses)
# create timers
self.startTimer = QTimer(self)
self.startTimer.timeout.connect(self.timeout)
self.meshTimer = QTimer(self)
self.meshTimer.timeout.connect(self.update_mesh)
# set default values
self.periodValue.setValue(200.0)
def start(self):
if self.idle:
self.connectButton.setEnabled(False)
self.socket.connectToHost(self.addrValue.text(), 1001)
self.startTimer.start(5000)
else:
self.stop()
def stop(self):
self.idle = True
self.socket.abort()
self.offset = 0
self.connectButton.setText('Connect')
self.connectButton.setEnabled(True)
self.scanButton.setEnabled(True)
def timeout(self):
self.display_error('timeout')
def connected(self):
self.startTimer.stop()
self.idle = False
self.set_period(self.periodValue.value())
self.set_trgtime(self.trgtimeValue.value())
self.set_trginv(self.trginvCheck.checkState())
self.set_shdelay(self.shdelayValue.value())
self.set_shtime(self.shtimeValue.value())
self.set_shinv(self.shinvCheck.checkState())
self.set_acqdelay(self.acqdelayValue.value())
self.set_samples(self.samplesValue.value())
self.set_pulses(self.pulsesValue.value())
# start pulse generators
self.socket.write(struct.pack('<I', 9<<28))
self.connectButton.setText('Disconnect')
self.connectButton.setEnabled(True)
self.scanButton.setEnabled(True)
def read_data(self):
size = self.socket.bytesAvailable()
if self.offset + size < 8 * self.size:
self.buffer[self.offset:self.offset + size] = self.socket.read(size)
self.offset += size
else:
self.meshTimer.stop()
self.buffer[self.offset:8 * self.size] = self.socket.read(8 * self.size - self.offset)
self.offset = 0
self.update_mesh()
self.scanButton.setEnabled(True)
def display_error(self, socketError):
self.startTimer.stop()
if socketError == 'timeout':
QMessageBox.information(self, 'Scanner', 'Error: connection timeout.')
else:
QMessageBox.information(self, 'Scanner', 'Error: %s.' % self.socket.errorString())
self.stop()
def set_period(self, value):
# set maximum delays and times to half period
maximum = int(value * 5.0 + 0.5) / 10.0
self.trgtimeValue.setMaximum(maximum)
self.shdelayValue.setMaximum(maximum)
self.shtimeValue.setMaximum(maximum)
self.acqdelayValue.setMaximum(maximum)
# set maximum number of samples per pulse
maximum = int(value * 500.0 + 0.5) / 10.0
if maximum > 256.0: maximum = 256.0
self.samplesValue.setMaximum(maximum)
shdelay = value * 0.25
samples = value * 0.5
if self.idle: return
self.socket.write(struct.pack('<I', 0<<28 | int(value * self.freq)))
def set_trgtime(self, value):
if self.idle: return
self.socket.write(struct.pack('<I', 1<<28 | int(value * self.freq)))
def set_trginv(self, checked):
if self.idle: return
self.socket.write(struct.pack('<I', 2<<28 | int(checked == Qt.Checked)))
def set_shdelay(self, value):
if self.idle: return
self.socket.write(struct.pack('<I', 3<<28 | int(value * self.freq)))
def set_shtime(self, value):
if self.idle: return
self.socket.write(struct.pack('<I', 4<<28 | int(value * self.freq)))
def set_shinv(self, checked):
if self.idle: return
self.socket.write(struct.pack('<I', 5<<28 | int(checked == Qt.Checked)))
def set_acqdelay(self, value):
if self.idle: return
self.socket.write(struct.pack('<I', 6<<28 | int(value * self.freq)))
def set_samples(self, value):
if self.idle: return
self.socket.write(struct.pack('<I', 7<<28 | int(value)))
def set_pulses(self, value):
if self.idle: return
self.socket.write(struct.pack('<I', 8<<28 | int(value)))
def scan(self):
if self.idle: return
self.scanButton.setEnabled(False)
self.data[:] = np.zeros(2 * 512 * 512, np.int32)
self.update_mesh()
self.socket.write(struct.pack('<I', 10<<28))
self.meshTimer.start(1000)
def update_mesh(self):
self.mesh.set_array(self.data[0::2]/(self.samplesValue.value() * self.pulsesValue.value() * 8192.0))
self.canvas.draw()
class VNA(QMainWindow, Ui_VNA):
max_size = 16383
formatter = matplotlib.ticker.FuncFormatter(lambda x, pos: '%1.1fM' % (x * 1e-6) if abs(x) >= 1e6 else '%1.1fk' % (x * 1e-3) if abs(x) >= 1e3 else '%1.1f' % x if abs(x) >= 1e0 else '%1.1fm' % (x * 1e+3) if abs(x) >= 1e-3 else '%1.1fu' % (x * 1e+6) if abs(x) >= 1e-6 else '%1.1f' % x)
def __init__(self):
super(VNA, self).__init__()
self.setupUi(self)
# IP address validator
rx = QRegExp('^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$')
self.addrValue.setValidator(QRegExpValidator(rx, self.addrValue))
# state variable
self.idle = True
# sweep parameters
self.sweep_start = 100
self.sweep_stop = 60000
self.sweep_size = 600
self.xaxis, self.sweep_step = np.linspace(self.sweep_start, self.sweep_stop, self.sweep_size, retstep = True)
self.xaxis *= 1000
# buffer and offset for the incoming samples
self.buffer = bytearray(32 * VNA.max_size)
self.offset = 0
self.data = np.frombuffer(self.buffer, np.complex64)
self.adc1 = np.zeros(VNA.max_size, np.complex64)
self.adc2 = np.zeros(VNA.max_size, np.complex64)
self.dac1 = np.zeros(VNA.max_size, np.complex64)
self.open = np.zeros(VNA.max_size, np.complex64)
self.short = np.zeros(VNA.max_size, np.complex64)
self.load = np.zeros(VNA.max_size, np.complex64)
self.dut = np.zeros(VNA.max_size, np.complex64)
self.mode = 'dut'
# create figure
self.figure = Figure()
self.figure.set_facecolor('none')
self.canvas = FigureCanvas(self.figure)
self.plotLayout.addWidget(self.canvas)
# create navigation toolbar
self.toolbar = NavigationToolbar(self.canvas, self.plotWidget, False)
# remove subplots action
actions = self.toolbar.actions()
self.toolbar.removeAction(actions[7])
self.plotLayout.addWidget(self.toolbar)
# create TCP socket
self.socket = QTcpSocket(self)
self.socket.connected.connect(self.connected)
self.socket.readyRead.connect(self.read_data)
self.socket.error.connect(self.display_error)
# connect signals from buttons and boxes
self.sweepFrame.setEnabled(False)
self.dutSweep.setEnabled(False)
self.connectButton.clicked.connect(self.start)
self.writeButton.clicked.connect(self.write_cfg)
self.readButton.clicked.connect(self.read_cfg)
self.openSweep.clicked.connect(self.sweep_open)
self.shortSweep.clicked.connect(self.sweep_short)
self.loadSweep.clicked.connect(self.sweep_load)
self.dutSweep.clicked.connect(self.sweep_dut)
self.s1pButton.clicked.connect(self.write_s1p)
self.startValue.valueChanged.connect(self.set_start)
self.stopValue.valueChanged.connect(self.set_stop)
self.sizeValue.valueChanged.connect(self.set_size)
self.openPlot.clicked.connect(self.plot_open)
self.shortPlot.clicked.connect(self.plot_short)
self.loadPlot.clicked.connect(self.plot_load)
self.dutPlot.clicked.connect(self.plot_dut)
self.smithPlot.clicked.connect(self.plot_smith)
self.impPlot.clicked.connect(self.plot_imp)
self.rcPlot.clicked.connect(self.plot_rc)
self.swrPlot.clicked.connect(self.plot_swr)
self.rlPlot.clicked.connect(self.plot_rl)
# create timer
self.startTimer = QTimer(self)
self.startTimer.timeout.connect(self.timeout)
def start(self):
if self.idle:
self.connectButton.setEnabled(False)
self.socket.connectToHost(self.addrValue.text(), 1001)
self.startTimer.start(5000)
else:
self.stop()
def stop(self):
self.idle = True
self.socket.abort()
self.offset = 0
self.connectButton.setText('Connect')
self.connectButton.setEnabled(True)
self.sweepFrame.setEnabled(False)
self.selectFrame.setEnabled(True)
self.dutSweep.setEnabled(False)
def timeout(self):
self.display_error('timeout')
def connected(self):
self.startTimer.stop()
self.idle = False
self.set_start(self.startValue.value())
self.set_stop(self.stopValue.value())
self.set_size(self.sizeValue.value())
self.connectButton.setText('Disconnect')
self.connectButton.setEnabled(True)
self.sweepFrame.setEnabled(True)
self.dutSweep.setEnabled(True)
def read_data(self):
size = self.socket.bytesAvailable()
if self.offset + size < 32 * self.sweep_size:
self.buffer[self.offset:self.offset + size] = self.socket.read(size)
self.offset += size
else:
self.buffer[self.offset:32 * self.sweep_size] = self.socket.read(32 * self.sweep_size - self.offset)
self.offset = 0
self.adc1 = self.data[0::4]
self.adc2 = self.data[1::4]
self.dac1 = self.data[2::4]
getattr(self, self.mode)[0:self.sweep_size] = self.adc1[0:self.sweep_size] / self.dac1[0:self.sweep_size]
self.sweepFrame.setEnabled(True)
self.selectFrame.setEnabled(True)
getattr(self, 'plot_%s' % self.mode)()
def display_error(self, socketError):
self.startTimer.stop()
if socketError == 'timeout':
QMessageBox.information(self, 'VNA', 'Error: connection timeout.')
else:
QMessageBox.information(self, 'VNA', 'Error: %s.' % self.socket.errorString())
self.stop()
def set_start(self, value):
self.sweep_start = value
self.xaxis, self.sweep_step = np.linspace(self.sweep_start, self.sweep_stop, self.sweep_size, retstep = True)
self.xaxis *= 1000
if self.idle: return
self.socket.write(struct.pack('<I', 0<<28 | int(value * 1000)))
def set_stop(self, value):
self.sweep_stop = value
self.xaxis, self.sweep_step = np.linspace(self.sweep_start, self.sweep_stop, self.sweep_size, retstep = True)
self.xaxis *= 1000
if self.idle: return
self.socket.write(struct.pack('<I', 1<<28 | int(value * 1000)))
def set_size(self, value):
self.sweep_size = value
self.xaxis, self.sweep_step = np.linspace(self.sweep_start, self.sweep_stop, self.sweep_size, retstep = True)
self.xaxis *= 1000
if self.idle: return
self.socket.write(struct.pack('<I', 2<<28 | int(value)))
def sweep(self):
if self.idle: return
self.sweepFrame.setEnabled(False)
self.selectFrame.setEnabled(False)
self.socket.write(struct.pack('<I', 3<<28))
def sweep_open(self):
self.mode = 'open'
self.sweep()
def sweep_short(self):
self.mode = 'short'
self.sweep()
def sweep_load(self):
self.mode = 'load'
self.sweep()
def sweep_dut(self):
self.mode = 'dut'
self.sweep()
def impedance(self):
return 50.0 * (self.open[0:self.sweep_size] - self.load[0:self.sweep_size]) * (self.dut[0:self.sweep_size] - self.short[0:self.sweep_size]) / ((self.load[0:self.sweep_size] - self.short[0:self.sweep_size]) * (self.open[0:self.sweep_size] - self.dut[0:self.sweep_size]))
def gamma(self):
z = self.impedance()
return (z - 50.0)/(z + 50.0)
def plot_magphase(self, data):
matplotlib.rcdefaults()
self.figure.clf()
self.figure.subplots_adjust(top = 0.98, right = 0.88)
axes1 = self.figure.add_subplot(111)
axes1.cla()
axes1.xaxis.set_major_formatter(VNA.formatter)
axes1.yaxis.set_major_formatter(VNA.formatter)
axes1.tick_params('y', color = 'blue', labelcolor = 'blue')
axes1.yaxis.label.set_color('blue')
axes1.plot(self.xaxis, np.absolute(data), color = 'blue')
axes2 = axes1.twinx()
axes2.spines['left'].set_color('blue')
axes2.spines['right'].set_color('red')
axes1.set_xlabel('Hz')
axes1.set_ylabel('Magnitude')
axes2.set_ylabel('Phase angle')
axes2.tick_params('y', color = 'red', labelcolor = 'red')
axes2.yaxis.label.set_color('red')
axes2.plot(self.xaxis, np.angle(data, deg = True), color = 'red')
self.canvas.draw()
def plot_open(self):
self.plot_magphase(self.open[0:self.sweep_size])
def plot_short(self):
self.plot_magphase(self.short[0:self.sweep_size])
def plot_load(self):
self.plot_magphase(self.load[0:self.sweep_size])
def plot_dut(self):
self.plot_magphase(self.dut[0:self.sweep_size])
def plot_smith(self):
matplotlib.rcdefaults()
self.figure.clf()
self.figure.subplots_adjust(top = 0.90, right = 0.90)
axes = self.figure.add_subplot(111, projection = 'smith', axes_radius = 0.55, axes_scale = 50.0)
axes.cla()
axes.plot(self.impedance())
self.canvas.draw()
def plot_imp(self):
self.plot_magphase(self.impedance())
def plot_rc(self):
self.plot_magphase(self.gamma())
def plot_swr(self):
matplotlib.rcdefaults()
self.figure.clf()
self.figure.subplots_adjust(top = 0.98, right = 0.88)
axes1 = self.figure.add_subplot(111)
axes1.cla()
axes1.xaxis.set_major_formatter(VNA.formatter)
axes1.yaxis.set_major_formatter(VNA.formatter)
axes1.set_xlabel('Hz')
axes1.set_ylabel('SWR')
magnitude = np.absolute(self.gamma())
swr = np.maximum(1.0, np.minimum(100.0, (1.0 + magnitude) / np.maximum(1.0e-20, 1.0 - magnitude)))
axes1.plot(self.xaxis, swr, color = 'blue')
self.canvas.draw()
def plot_rl(self):
matplotlib.rcdefaults()
self.figure.clf()
self.figure.subplots_adjust(top = 0.98, right = 0.88)
axes1 = self.figure.add_subplot(111)
axes1.cla()
axes1.xaxis.set_major_formatter(VNA.formatter)
axes1.set_xlabel('Hz')
axes1.set_ylabel('Return loss, dB')
magnitude = np.absolute(self.gamma())
axes1.plot(self.xaxis, 20.0 * np.log10(magnitude), color = 'blue')
self.canvas.draw()
def write_cfg(self):
name = QFileDialog.getSaveFileName(self, 'Write configuration settings', '.', '*.ini')
settings = QSettings(name[0], QSettings.IniFormat)
self.write_cfg_settings(settings)
def read_cfg(self):
name = QFileDialog.getOpenFileName(self, 'Read configuration settings', '.', '*.ini')
settings = QSettings(name[0], QSettings.IniFormat)
self.read_cfg_settings(settings)
def write_cfg_settings(self, settings):
settings.setValue('start', self.startValue.value())
settings.setValue('stop', self.stopValue.value())
size = self.sizeValue.value()
settings.setValue('size', size)
for i in range(0, size):
settings.setValue('open_real_%d' % i, float(self.open.real[i]))
settings.setValue('open_imag_%d' % i, float(self.open.imag[i]))
for i in range(0, size):
settings.setValue('short_real_%d' % i, float(self.short.real[i]))
settings.setValue('short_imag_%d' % i, float(self.short.imag[i]))
for i in range(0, size):
settings.setValue('load_real_%d' % i, float(self.load.real[i]))
settings.setValue('load_imag_%d' % i, float(self.load.imag[i]))
for i in range(0, size):
settings.setValue('dut_real_%d' % i, float(self.dut.real[i]))
settings.setValue('dut_imag_%d' % i, float(self.dut.imag[i]))
def read_cfg_settings(self, settings):
self.startValue.setValue(settings.value('start', 100, type = int))
self.stopValue.setValue(settings.value('stop', 60000, type = int))
size = settings.value('size', 600, type = int)
self.sizeValue.setValue(size)
for i in range(0, size):
real = settings.value('open_real_%d' % i, 0.0, type = float)
imag = settings.value('open_imag_%d' % i, 0.0, type = float)
self.open[i] = real + 1.0j * imag
for i in range(0, size):
real = settings.value('short_real_%d' % i, 0.0, type = float)
imag = settings.value('short_imag_%d' % i, 0.0, type = float)
self.short[i] = real + 1.0j * imag
for i in range(0, size):
real = settings.value('load_real_%d' % i, 0.0, type = float)
imag = settings.value('load_imag_%d' % i, 0.0, type = float)
self.load[i] = real + 1.0j * imag
for i in range(0, size):
real = settings.value('dut_real_%d' % i, 0.0, type = float)
imag = settings.value('dut_imag_%d' % i, 0.0, type = float)
self.dut[i] = real + 1.0j * imag
def write_s1p(self):
name = QFileDialog.getSaveFileName(self, 'Write s1p file', '.', '*.s1p')
fh = open(name[0], 'w')
gamma = self.gamma()
size = self.sizeValue.value()
fh.write('# GHz S MA R 50\n')
for i in range(0, size):
fh.write('0.0%.8d %8.6f %7.2f\n' % (self.xaxis[i], np.absolute(gamma[i]), np.angle(gamma[i], deg = True)))
fh.close()
def __init__(self, parent=None):
super(Client, self).__init__(parent)
self.networkSession = None
self.blockSize = 0
self.currentFortune = ""
hostLabel = QLabel("&Server name:")
portLabel = QLabel("S&erver port:")
self.hostCombo = QComboBox()
self.hostCombo.setEditable(True)
name = QHostInfo.localHostName()
if name != "":
self.hostCombo.addItem(name)
domain = QHostInfo.localDomainName()
if domain != "":
self.hostCombo.addItem(name + "." + domain)
if name != "localhost":
self.hostCombo.addItem("localhost")
ipAddressesList = QNetworkInterface.allAddresses()
for ipAddress in ipAddressesList:
if not ipAddress.isLoopback():
self.hostCombo.addItem(ipAddress.toString())
for ipAddress in ipAddressesList:
if ipAddress.isLoopback():
self.hostCombo.addItem(ipAddress.toString())
self.portLineEdit = QLineEdit()
self.portLineEdit.setValidator(QIntValidator(1, 65535, self))
hostLabel.setBuddy(self.hostCombo)
portLabel.setBuddy(self.portLineEdit)
self.statusLabel = QLabel("This examples requires that you run " "the Fortune Server example as well.")
self.getFortuneButton = QPushButton("Get Fortune")
self.getFortuneButton.setDefault(True)
self.getFortuneButton.setEnabled(False)
quitButton = QPushButton("Quit")
buttonBox = QDialogButtonBox()
buttonBox.addButton(self.getFortuneButton, QDialogButtonBox.ActionRole)
buttonBox.addButton(quitButton, QDialogButtonBox.RejectRole)
self.tcpSocket = QTcpSocket(self)
self.hostCombo.editTextChanged.connect(self.enableGetFortuneButton)
self.portLineEdit.textChanged.connect(self.enableGetFortuneButton)
self.getFortuneButton.clicked.connect(self.requestNewFortune)
quitButton.clicked.connect(self.close)
self.tcpSocket.readyRead.connect(self.readFortune)
self.tcpSocket.error.connect(self.displayError)
mainLayout = QGridLayout()
mainLayout.addWidget(hostLabel, 0, 0)
mainLayout.addWidget(self.hostCombo, 0, 1)
mainLayout.addWidget(portLabel, 1, 0)
mainLayout.addWidget(self.portLineEdit, 1, 1)
mainLayout.addWidget(self.statusLabel, 2, 0, 1, 2)
mainLayout.addWidget(buttonBox, 3, 0, 1, 2)
self.setLayout(mainLayout)
self.setWindowTitle("Fortune Client")
self.portLineEdit.setFocus()
manager = QNetworkConfigurationManager()
if manager.capabilities() & QNetworkConfigurationManager.NetworkSessionRequired:
settings = QSettings(QSettings.UserScope, "QtProject")
settings.beginGroup("QtNetwork")
id = settings.value("DefaultNetworkConfiguration")
settings.endGroup()
config = manager.configurationFromIdentifier(id)
if config.state() & QNetworkConfiguration.Discovered == 0:
config = manager.defaultConfiguration()
self.networkSession = QNetworkSession(config, self)
self.networkSession.opened.connect(self.sessionOpened)
self.getFortuneButton.setEnabled(False)
self.statusLabel.setText("Opening network session.")
self.networkSession.open()
def run(self):
self.mutex.lock()
serverName = self.hostName
serverPort = self.port
self.mutex.unlock()
while not self.quit:
Timeout = 5 * 1000
socket = QTcpSocket()
socket.connectToHost(serverName, serverPort)
if not socket.waitForConnected(Timeout):
self.error.emit(socket.error(), socket.errorString())
return
while socket.bytesAvailable() < 2:
if not socket.waitForReadyRead(Timeout):
self.error.emit(socket.error(), socket.errorString())
return
instr = QDataStream(socket)
instr.setVersion(QDataStream.Qt_4_0)
blockSize = instr.readUInt16()
while socket.bytesAvailable() < blockSize:
if not socket.waitForReadyRead(Timeout):
self.error.emit(socket.error(), socket.errorString())
return
self.mutex.lock()
fortune = instr.readQString()
self.newFortune.emit(fortune)
self.cond.wait(self.mutex)
serverName = self.hostName
serverPort = self.port
self.mutex.unlock()
class Main(QMainWindow):
def __init__(self, *args):
super(Main, self).__init__(*args)
loadUi('mainwindow.ui', self)
self.host.setText("localhost")
self.port.setText("11010")
self.prompt.setText("M114")
self.conn = QTcpSocket(self)
self.conn.readyRead.connect(self.readSocket)
self.conn.error.connect(self.socketError)
self.conn.connected.connect(self.socketConnect)
self.conn.disconnected.connect(self.socketDisconnect)
self.connected = False
self.actionSave.triggered.connect(self.save)
self.prompt.setFocus()
self.do_connect()
def append(self, text):
self.text.append(text)
if self.autoscroll.isChecked():
c = self.text.textCursor()
c.movePosition(QTextCursor.End, QTextCursor.MoveAnchor)
self.text.setTextCursor(c)
def readSocket(self):
r = self.conn.readAll()
if r:
r = str(r).strip()
for chunk in r.splitlines():
if chunk:
if chunk[0] == '<':
self.text.setTextColor(QColor(200, 0, 0))
elif chunk[0] == '>':
self.text.setTextColor(QColor(0, 200, 0))
else:
self.text.setTextColor(QColor(0, 0, 200))
self.append(chunk)
def info(self, errtext):
self.text.setTextColor(QColor(20, 20, 20))
self.append(errtext)
def err(self, errtext):
self.text.setTextColor(QColor(100, 0, 0))
self.append(errtext)
def socketDisconnect(self):
self.connected = False
self.err("Disconnected")
def socketConnect(self):
self.connected = True
self.info("Connected")
def socketError(self, socketError):
if socketError == QAbstractSocket.RemoteHostClosedError:
pass
elif socketError == QAbstractSocket.HostNotFoundError:
self.err("The host was not found. Please check the host name and "
"port settings.")
elif socketError == QAbstractSocket.ConnectionRefusedError:
self.err("The connection was refused by the peer. Make sure the "
"server is running, and check that the host name "
"and port settings are correct.")
else:
self.err("The following error occurred: {0}"
.format(self.conn.errorString()))
def save(self):
fname, sel = QFileDialog.getSaveFileName(
self,
'Save Log',)
#'/path/to/default/directory', FIXME: lastused
#selectedFilter='*.txt')
if fname:
with open(fname, 'w+') as f:
f.write(self.text.toPlainText())
def do_connect(self):
self.conn.abort()
self.conn.connectToHost(self.host.text(),
int(self.port.text()))
@pyqtSlot()
def on_connect_clicked(self):
self.do_connect()
self.prompt.setFocus()
@pyqtSlot()
def on_send_clicked(self):
if not self.connected:
self.err("Not connected")
return
out = (self.prompt.text() + '\n').encode('ascii')
self.conn.write(out)
@pyqtSlot()
def on_right_on_clicked(self):
self.action("e1")
class PulsedNMR(QMainWindow, Ui_PulsedNMR):
rates = {0:25.0e3, 1:50.0e3, 2:250.0e3, 3:500.0e3, 4:2500.0e3}
def __init__(self):
super(PulsedNMR, self).__init__()
self.setupUi(self)
self.rateValue.addItems(['25', '50', '250', '500', '2500'])
# IP address validator
rx = QRegExp('^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]).){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$')
self.addrValue.setValidator(QRegExpValidator(rx, self.addrValue))
# state variable
self.idle = True
# number of samples to show on the plot
self.size = 50000
# buffer and offset for the incoming samples
self.buffer = bytearray(8 * self.size)
self.offset = 0
# create figure
figure = Figure()
figure.set_facecolor('none')
self.axes = figure.add_subplot(111)
self.canvas = FigureCanvas(figure)
self.plotLayout.addWidget(self.canvas)
# create navigation toolbar
self.toolbar = NavigationToolbar(self.canvas, self.plotWidget, False)
# remove subplots action
actions = self.toolbar.actions()
self.toolbar.removeAction(actions[7])
self.plotLayout.addWidget(self.toolbar)
# create TCP socket
self.socket = QTcpSocket(self)
self.socket.connected.connect(self.connected)
self.socket.readyRead.connect(self.read_data)
self.socket.error.connect(self.display_error)
# connect signals from buttons and boxes
self.startButton.clicked.connect(self.start)
self.freqValue.valueChanged.connect(self.set_freq)
self.awidthValue.valueChanged.connect(self.set_awidth)
self.deltaValue.valueChanged.connect(self.set_delta)
self.rateValue.currentIndexChanged.connect(self.set_rate)
# set rate
self.rateValue.setCurrentIndex(2)
# create timer for the repetitions
self.timer = QTimer(self)
self.timer.timeout.connect(self.fire)
def start(self):
if self.idle:
self.startButton.setEnabled(False)
self.socket.connectToHost(self.addrValue.text(), 1001)
else:
self.idle = True
self.timer.stop()
self.socket.close()
self.offset = 0
self.startButton.setText('Start')
self.startButton.setEnabled(True)
def connected(self):
self.idle = False
self.set_freq(self.freqValue.value())
self.set_rate(self.rateValue.currentIndex())
self.set_awidth(self.awidthValue.value())
self.fire()
self.timer.start(self.deltaValue.value())
self.startButton.setText('Stop')
self.startButton.setEnabled(True)
def read_data(self):
size = self.socket.bytesAvailable()
if self.offset + size < 8 * self.size:
self.buffer[self.offset:self.offset + size] = self.socket.read(size)
self.offset += size
else:
self.buffer[self.offset:8 * self.size] = self.socket.read(8 * self.size - self.offset)
self.offset = 0
# plot the signal envelope
data = np.frombuffer(self.buffer, np.complex64)
self.curve.set_ydata(np.abs(data))
self.canvas.draw()
def display_error(self, socketError):
if socketError == QAbstractSocket.RemoteHostClosedError:
pass
else:
QMessageBox.information(self, 'PulsedNMR', 'Error: %s.' % self.socket.errorString())
self.startButton.setText('Start')
self.startButton.setEnabled(True)
def set_freq(self, value):
if self.idle: return
self.socket.write(struct.pack('<I', 0<<28 | int(1.0e6 * value)))
def set_rate(self, index):
# time axis
rate = float(PulsedNMR.rates[index])
time = np.linspace(0.0, (self.size - 1) * 1000.0 / rate, self.size)
# reset toolbar
self.toolbar.home()
self.toolbar._views.clear()
self.toolbar._positions.clear()
# reset plot
self.axes.clear()
self.axes.grid()
# plot zeros and get store the returned Line2D object
self.curve, = self.axes.plot(time, np.zeros(self.size))
x1, x2, y1, y2 = self.axes.axis()
# set y axis limits
self.axes.axis((x1, x2, -0.1, 0.4))
self.axes.set_xlabel('time, ms')
self.canvas.draw()
# set repetition time
minimum = self.size / rate * 2000.0
if minimum < 100.0: minimum = 100.0
self.deltaValue.setMinimum(minimum)
self.deltaValue.setValue(minimum)
if self.idle: return
self.socket.write(struct.pack('<I', 1<<28 | index))
def set_awidth(self, value):
if self.idle: return
self.socket.write(struct.pack('<I', 2<<28 | int(1.0e1 * value)))
def set_delta(self, value):
if self.idle: return
self.timer.stop()
self.timer.start(value)
def fire(self):
if self.idle: return
self.socket.write(struct.pack('<I', 3<<28))
class Client(QDialog):
def __init__(self):
super().__init__()
self.tcpSocket = QTcpSocket(self)
self.blockSize = 0
self.makeRequest()
self.tcpSocket.waitForConnected(1000)
# send any message you like it could come from a widget text.
self.tcpSocket.write(b'hello')
self.tcpSocket.readyRead.connect(self.dealCommunication)
self.tcpSocket.error.connect(self.displayError)
def makeRequest(self):
HOST = '127.0.0.1'
PORT = 8000
self.tcpSocket.connectToHost(HOST, PORT, QIODevice.ReadWrite)
def dealCommunication(self):
instr = QDataStream(self.tcpSocket)
instr.setVersion(QDataStream.Qt_5_0)
if self.blockSize == 0:
if self.tcpSocket.bytesAvailable() < 2:
return
self.blockSize = instr.readUInt16()
if self.tcpSocket.bytesAvailable() < self.blockSize:
return
# Print response to terminal, we could use it anywhere else we wanted.
print(str(instr.readString(), encoding='ascii'))
def displayError(self, socketError):
if socketError == QAbstractSocket.RemoteHostClosedError:
pass
else:
print(self, "The following error occurred: %s." % self.tcpSocket.errorString())