def publishInDBS3(config, taskname, verbose):
"""
Publish output from one task in DBS
"""
def mark_good(files, crabServer, logger):
"""
Mark the list of files as tranferred
"""
msg = "Marking %s file(s) as published." % len(files)
logger.info(msg)
if dryRun:
logger.info("DryRun: skip marking good file")
return
nMarked = 0
for lfn in files:
data = {}
source_lfn = lfn
docId = getHashLfn(source_lfn)
data['asoworker'] = config.General.asoworker
data['subresource'] = 'updatePublication'
data['list_of_ids'] = [docId]
data['list_of_publication_state'] = ['DONE']
data['list_of_retry_value'] = [1]
data['list_of_failure_reason'] = ['']
try:
result = crabServer.post(api='filetransfers', data=encodeRequest(data))
logger.debug("updated DocumentId: %s lfn: %s Result %s", docId, source_lfn, result)
except Exception as ex:
logger.error("Error updating status for DocumentId: %s lfn: %s", docId, source_lfn)
logger.error("Error reason: %s", ex)
nMarked += 1
if nMarked % 10 == 0:
logger.info('marked %d files', nMarked)
def mark_failed(files, crabServer, logger, failure_reason=""):
"""
Something failed for these files so increment the retry count
"""
msg = "Marking %s file(s) as failed" % len(files)
logger.info(msg)
if dryRun:
logger.debug("DryRun: skip marking failes files")
return
nMarked = 0
for lfn in files:
source_lfn = lfn
docId = getHashLfn(source_lfn)
data = dict()
data['asoworker'] = config.General.asoworker
data['subresource'] = 'updatePublication'
data['list_of_ids'] = [docId]
data['list_of_publication_state'] = ['FAILED']
data['list_of_retry_value'] = [1]
data['list_of_failure_reason'] = [failure_reason]
logger.debug("data: %s ", data)
try:
result = crabServer.post(api='filetransfers', data=encodeRequest(data))
logger.debug("updated DocumentId: %s lfn: %s Result %s", docId, source_lfn, result)
except Exception as ex:
logger.error("Error updating status for DocumentId: %s lfn: %s", docId, source_lfn)
logger.error("Error reason: %s", ex)
nMarked += 1
if nMarked % 10 == 0:
logger.info('marked %d files', nMarked)
def createLogdir(dirname):
"""
Create the directory dirname ignoring erors in case it exists. Exit if
the directory cannot be created.
"""
try:
os.mkdir(dirname)
except OSError as ose:
if ose.errno != 17: #ignore the "Directory already exists error"
print(str(ose))
print("The task worker need to access the '%s' directory" % dirname)
sys.exit(1)
return
def saveSummaryJson(logdir, summary):
"""
Save a publication summary as JSON. Make a new file every time this script runs
:param summary: a summary disctionary. Must at least have key 'taskname'
:param logdir: the directory where to write the summary
:return: the full path name of the written file
"""
taskname = summary['taskname']
counter = 1
summaryFileName = os.path.join(logdir, taskname + '-1.json')
while os.path.exists(summaryFileName):
counter += 1
summaryFileName = os.path.join(logdir, taskname + '-%d.json' % counter)
with open(summaryFileName, 'w') as fd:
json.dump(summary, fd)
return summaryFileName
taskFilesDir = config.General.taskFilesDir
dryRun = config.TaskPublisher.dryRun
username = taskname.split(':')[1].split('_')[0]
logdir = os.path.join(config.General.logsDir, 'tasks', username)
logfile = os.path.join(logdir, taskname + '.log')
createLogdir(logdir)
migrationLogDir = os.path.join(config.General.logsDir, 'migrations')
createLogdir(migrationLogDir)
logger = logging.getLogger(taskname)
logging.basicConfig(filename=logfile, level=logging.INFO, format=config.TaskPublisher.logMsgFormat)
if verbose:
logger.setLevel(logging.DEBUG)
logger.info("Start new iteration on taskname: %s\nGet files to publish", taskname)
# prepare a dummy summary JSON file in case there's nothing to do
nothingToDo = {}
nothingToDo['taskname'] = taskname
nothingToDo['result'] = 'OK'
nothingToDo['reason'] = 'NOTHING TO DO'
nothingToDo['publishedBlocks'] = 0
nothingToDo['failedBlocks'] = 0
nothingToDo['failedBlockDumps'] = []
nothingToDo['publishedFiles'] = 0
nothingToDo['failedFiles'] = 0
nothingToDo['nextIterFiles'] = 0
toPublish = []
# TODO move from new to done when processed
fname = taskFilesDir + taskname + ".json"
with open(fname) as f:
toPublish = json.load(f)
if not toPublish:
logger.info("Empty data file %s", fname)
summaryFileName = saveSummaryJson(logdir, nothingToDo)
return summaryFileName
pnn = toPublish[0]["Destination"]
dataset = toPublish[0]['outdataset']
logger.info("Will publish user files in %s", dataset)
# CRABServer REST API's (see CRABInterface)
try:
instance = config.General.instance
except:
msg = "No instance provided: need to specify config.General.instance in the configuration"
raise ConfigException(msg)
if instance in SERVICE_INSTANCES:
logger.info('Will connect to CRAB service: %s', instance)
restHost = SERVICE_INSTANCES[instance]['restHost']
dbInstance = SERVICE_INSTANCES[instance]['dbInstance']
else:
msg = "Invalid instance value '%s'" % instance
raise ConfigException(msg)
if instance == 'other':
logger.info('Will use restHost and dbInstance from config file')
try:
restHost = config.General.restHost
dbInstance = config.General.dbInstance
except:
msg = "Need to specify config.General.restHost and dbInstance in the configuration"
raise ConfigException(msg)
restURInoAPI = '/crabserver/' + dbInstance
logger.info('Will connect to CRAB Data Base via URL: https://%s/%s', restHost, restURInoAPI)
# CRAB REST API's
crabServer = CRABRest(hostname=restHost, localcert=config.General.serviceCert,
localkey=config.General.serviceKey, retry=3,
userAgent='CRABPublisher')
crabServer.setDbInstance(dbInstance=dbInstance)
data = dict()
data['subresource'] = 'search'
data['workflow'] = taskname
try:
results = crabServer.get(api='task', data=encodeRequest(data))
except Exception as ex:
logger.error("Failed to get acquired publications from oracleDB: %s", ex)
nothingToDo['result'] = 'FAIL'
nothingToDo['reason'] = 'Error contacting CRAB REST'
summaryFileName = saveSummaryJson(logdir, nothingToDo)
return summaryFileName
if verbose:
logger.info(results[0]['desc']['columns'])
try:
inputDatasetIndex = results[0]['desc']['columns'].index("tm_input_dataset")
inputDataset = results[0]['result'][inputDatasetIndex]
sourceURLIndex = results[0]['desc']['columns'].index("tm_dbs_url")
sourceURL = results[0]['result'][sourceURLIndex]
publish_dbs_urlIndex = results[0]['desc']['columns'].index("tm_publish_dbs_url")
publish_dbs_url = results[0]['result'][publish_dbs_urlIndex]
if not sourceURL.endswith("/DBSReader") and not sourceURL.endswith("/DBSReader/"):
sourceURL += "/DBSReader"
except Exception:
logger.exception("ERROR")
# When looking up parents may need to look in global DBS as well.
globalURL = sourceURL
globalURL = globalURL.replace('phys01', 'global')
globalURL = globalURL.replace('phys02', 'global')
globalURL = globalURL.replace('phys03', 'global')
globalURL = globalURL.replace('caf', 'global')
# allow to use a DBS REST host different from cmsweb.cern.ch (which is the
# default inserted by CRAB Client)
sourceURL = sourceURL.replace('cmsweb.cern.ch', config.TaskPublisher.DBShost)
globalURL = globalURL.replace('cmsweb.cern.ch', config.TaskPublisher.DBShost)
publish_dbs_url = publish_dbs_url.replace('cmsweb.cern.ch', config.TaskPublisher.DBShost)
# DBS client relies on X509 env. vars
os.environ['X509_USER_CERT'] = config.General.serviceCert
os.environ['X509_USER_KEY'] = config.General.serviceKey
# create DBS API objects
logger.info("DBS Source API URL: %s", sourceURL)
sourceApi = dbsClient.DbsApi(url=sourceURL)
logger.info("DBS Global API URL: %s", globalURL)
globalApi = dbsClient.DbsApi(url=globalURL)
if publish_dbs_url.endswith('/DBSWriter'):
publish_read_url = publish_dbs_url[:-len('/DBSWriter')] + '/DBSReader'
publish_migrate_url = publish_dbs_url[:-len('/DBSWriter')] + '/DBSMigrate'
else:
publish_migrate_url = publish_dbs_url + '/DBSMigrate'
publish_read_url = publish_dbs_url + '/DBSReader'
publish_dbs_url += '/DBSWriter'
try:
logger.info("DBS Destination API URL: %s", publish_dbs_url)
destApi = dbsClient.DbsApi(url=publish_dbs_url)
logger.info("DBS Destination read API URL: %s", publish_read_url)
destReadApi = dbsClient.DbsApi(url=publish_read_url)
logger.info("DBS Migration API URL: %s", publish_migrate_url)
migrateApi = dbsClient.DbsApi(url=publish_migrate_url)
except Exception:
logger.exception('Wrong DBS URL %s', publish_dbs_url)
nothingToDo['result'] = 'FAIL'
nothingToDo['reason'] = 'Error contacting DBS'
summaryFileName = saveSummaryJson(logdir, nothingToDo)
return summaryFileName
logger.info("inputDataset: %s", inputDataset)
noInput = len(inputDataset.split("/")) <= 3
if not noInput:
try:
existing_datasets = sourceApi.listDatasets(dataset=inputDataset, detail=True, dataset_access_type='*')
primary_ds_type = existing_datasets[0]['primary_ds_type']
# There's little chance this is correct, but it's our best guess for now.
# CRAB2 uses 'crab2_tag' for all cases
existing_output = destReadApi.listOutputConfigs(dataset=inputDataset)
except Exception:
logger.exception('Wrong DBS URL %s', publish_dbs_url)
nothingToDo['result'] = 'FAIL'
nothingToDo['reason'] = 'Error looking up input dataset in DBS'
summaryFileName = saveSummaryJson(logdir, nothingToDo)
return summaryFileName
if not existing_output:
msg = "Unable to list output config for input dataset %s." % (inputDataset)
logger.error(msg)
global_tag = 'crab3_tag'
else:
global_tag = existing_output[0]['global_tag']
else:
msg = "This publication appears to be for private MC."
logger.info(msg)
primary_ds_type = 'mc'
global_tag = 'crab3_tag'
acquisition_era_name = "CRAB"
processing_era_config = {'processing_version': 1, 'description': 'CRAB3_processing_era'}
appName = 'cmsRun'
appVer = toPublish[0]["swversion"]
pset_hash = toPublish[0]['publishname'].split("-")[-1]
gtag = str(toPublish[0]['globaltag'])
if gtag == "None":
gtag = global_tag
try:
if toPublish[0]['acquisitionera'] and not toPublish[0]['acquisitionera'] in ["null"]:
acquisitionera = str(toPublish[0]['acquisitionera'])
else:
acquisitionera = acquisition_era_name
except Exception:
acquisitionera = acquisition_era_name
_, primName, procName, tier = toPublish[0]['outdataset'].split('/')
primds_config = {'primary_ds_name': primName, 'primary_ds_type': primary_ds_type}
msg = "About to insert primary dataset"
logger.debug(msg)
if dryRun:
logger.info("DryRun: skip insertPrimaryDataset")
else:
destApi.insertPrimaryDataset(primds_config)
msg = "Successfully inserted primary dataset %s." % (primName)
logger.info(msg)
final = {}
failed = []
publish_in_next_iteration = []
published = []
# Find all files already published in this dataset.
try:
existingDBSFiles = destReadApi.listFiles(dataset=dataset, detail=True)
existingFiles = [f['logical_file_name'] for f in existingDBSFiles]
existingFilesValid = [f['logical_file_name'] for f in existingDBSFiles if f['is_file_valid']]
msg = "Dataset %s already contains %d files" % (dataset, len(existingFiles))
msg += " (%d valid, %d invalid)." % (len(existingFilesValid), len(existingFiles) - len(existingFilesValid))
logger.info(msg)
final['existingFiles'] = len(existingFiles)
except Exception as ex:
msg = "Error when listing files in DBS: %s" % (str(ex))
msg += "\n%s" % (str(traceback.format_exc()))
logger.error(msg)
nothingToDo['result'] = 'FAIL'
nothingToDo['reason'] = 'Error listing existing files in DBS'
summaryFileName = saveSummaryJson(logdir, nothingToDo)
return summaryFileName
# check if actions are needed
workToDo = False
for fileTo in toPublish:
#print(existingFilesValid)
if fileTo['lfn'] not in existingFiles:
workToDo = True
break
if not workToDo:
msg = "Nothing uploaded, output dataset has these files already."
logger.info(msg)
logger.info('Make sure those files are marked as Done')
# docId is the has of the source LFN i.e. the file in the tmp area at the running site
files = [f['SourceLFN'] for f in toPublish]
mark_good(files, crabServer, logger)
summaryFileName = saveSummaryJson(logdir, nothingToDo)
return summaryFileName
acquisition_era_config = {'acquisition_era_name': acquisitionera, 'start_date': 0}
output_config = {'release_version': appVer,
'pset_hash': pset_hash,
'app_name': appName,
'output_module_label': 'o',
'global_tag': global_tag,
}
dataset_config = {'dataset': dataset,
'processed_ds_name': procName,
'data_tier_name': tier,
'dataset_access_type': 'VALID',
'physics_group_name': 'CRAB3',
'last_modification_date': int(time.time()),
}
logger.info("Output dataset config: %s", str(dataset_config))
# List of all files that must (and can) be published.
dbsFiles = []
dbsFiles_f = []
# Set of all the parent files from all the files requested to be published.
parentFiles = set()
# Set of parent files for which the migration to the destination DBS instance
# should be skipped (because they were not found in DBS).
parentsToSkip = set()
# Set of parent files to migrate from the source DBS instance
# to the destination DBS instance.
localParentBlocks = set()
# Set of parent files to migrate from the global DBS instance
# to the destination DBS instance.
globalParentBlocks = set()
# Loop over all files to publish.
for file_ in toPublish:
if verbose:
logger.info(file_)
# Check if this file was already published and if it is valid.
if file_['lfn'] not in existingFilesValid:
# We have a file to publish.
# Get the parent files and for each parent file do the following:
# 1) Add it to the list of parent files.
# 2) Find the block to which it belongs and insert that block name in
# (one of) the set of blocks to be migrated to the destination DBS.
for parentFile in list(file_['parents']):
if parentFile not in parentFiles:
parentFiles.add(parentFile)
# Is this parent file already in the destination DBS instance?
# (If yes, then we don't have to migrate this block.)
blocksDict = destReadApi.listBlocks(logical_file_name=parentFile)
if not blocksDict:
# No, this parent file is not in the destination DBS instance.
# Maybe it is in the same DBS instance as the input dataset?
blocksDict = sourceApi.listBlocks(logical_file_name=parentFile)
if blocksDict:
# Yes, this parent file is in the same DBS instance as the input dataset.
# Add the corresponding block to the set of blocks from the source DBS
# instance that have to be migrated to the destination DBS.
localParentBlocks.add(blocksDict[0]['block_name'])
else:
# No, this parent file is not in the same DBS instance as input dataset.
# Maybe it is in global DBS instance?
blocksDict = globalApi.listBlocks(logical_file_name=parentFile)
if blocksDict:
# Yes, this parent file is in global DBS instance.
# Add the corresponding block to the set of blocks from global DBS
# instance that have to be migrated to the destination DBS.
globalParentBlocks.add(blocksDict[0]['block_name'])
# If this parent file is not in the destination DBS instance, is not
# the source DBS instance, and is not in global DBS instance, then it
# means it is not known to DBS and therefore we can not migrate it.
# Put it in the set of parent files for which migration should be skipped.
if not blocksDict:
parentsToSkip.add(parentFile)
# If this parent file should not be migrated because it is not known to DBS,
# we remove it from the list of parents in the file-to-publish info dictionary
# (so that when publishing, this "parent" file will not appear as a parent).
if parentFile in parentsToSkip:
msg = "Skipping parent file %s, as it doesn't seem to be known to DBS." % (parentFile)
logger.info(msg)
if parentFile in file_['parents']:
file_['parents'].remove(parentFile)
# Add this file to the list of files to be published.
dbsFiles.append(format_file_3(file_))
dbsFiles_f.append(file_)
#print file
published.append(file_['SourceLFN'])
#published.append(file_['lfn'].replace("/store","/store/temp"))
# Print a message with the number of files to publish.
msg = "Found %d files not already present in DBS which will be published." % (len(dbsFiles))
logger.info(msg)
# If there are no files to publish, continue with the next dataset.
if not dbsFiles_f:
msg = "No file to publish to do for this dataset."
logger.info(msg)
summaryFileName = saveSummaryJson(logdir, nothingToDo)
return summaryFileName
# Migrate parent blocks before publishing.
# First migrate the parent blocks that are in the same DBS instance
# as the input dataset.
if localParentBlocks:
msg = "List of parent blocks that need to be migrated from %s:\n%s" % (sourceApi.url, localParentBlocks)
logger.info(msg)
if dryRun:
logger.info("DryRun: skipping migration request")
else:
statusCode, failureMsg = migrateByBlockDBS3(taskname, migrateApi, destReadApi, sourceApi,
inputDataset, localParentBlocks, migrationLogDir, verbose)
if statusCode:
failureMsg += " Not publishing any files."
logger.info(failureMsg)
summaryFileName = saveSummaryJson(logdir, nothingToDo)
return summaryFileName
# Then migrate the parent blocks that are in the global DBS instance.
if globalParentBlocks:
msg = "List of parent blocks that need to be migrated from %s:\n%s" % (globalApi.url, globalParentBlocks)
logger.info(msg)
if dryRun:
logger.info("DryRun: skipping migration request")
else:
statusCode, failureMsg = migrateByBlockDBS3(taskname, migrateApi, destReadApi, globalApi,
inputDataset, globalParentBlocks, migrationLogDir, verbose)
if statusCode:
failureMsg += " Not publishing any files."
logger.info(failureMsg)
summaryFileName = saveSummaryJson(logdir, nothingToDo)
return summaryFileName
# Publish the files in blocks. The blocks must have exactly max_files_per_block
# files, unless there are less than max_files_per_block files to publish to
# begin with. If there are more than max_files_per_block files to publish,
# publish as many blocks as possible and leave the tail of files for the next
# PublisherWorker call, unless forced to published.
block_count = 0
count = 0
publishedBlocks = 0
failedBlocks = 0
max_files_per_block = config.General.max_files_per_block
dumpList = [] # keep a list of files where blocks which fail publication are dumped
while True:
block_name = "%s#%s" % (dataset, str(uuid.uuid4()))
files_to_publish = dbsFiles[count:count+max_files_per_block]
try:
block_config = {'block_name': block_name, 'origin_site_name': pnn, 'open_for_writing': 0}
if verbose:
msg = "Inserting files %s into block %s." % ([f['logical_file_name']
for f in files_to_publish], block_name)
logger.info(msg)
blockDump = createBulkBlock(output_config, processing_era_config,
primds_config, dataset_config,
acquisition_era_config, block_config, files_to_publish)
#logger.debug("Block to insert: %s\n %s" % (blockDump, destApi.__dict__ ))
if dryRun:
logger.info("DryRun: skip insertBulkBlock")
else:
destApi.insertBulkBlock(blockDump)
block_count += 1
publishedBlocks += 1
except Exception as ex:
#logger.error("Error for files: %s" % [f['SourceLFN'] for f in toPublish])
logger.error("Error for files: %s", [f['lfn'] for f in toPublish])
failed.extend([f['SourceLFN'] for f in toPublish])
#failed.extend([f['lfn'].replace("/store","/store/temp") for f in toPublish])
msg = "Error when publishing (%s) " % ", ".join(failed)
msg += str(ex)
msg += str(traceback.format_exc())
logger.error(msg)
failure_reason = str(ex)
taskFilesDir = config.General.taskFilesDir
fname = os.path.join(taskFilesDir, 'FailedBlocks', 'failed-block-at-%s.txt' % time.time())
with open(fname, 'w') as fd:
fd.write(pprint.pformat(blockDump))
dumpList.append(fname)
failedBlocks += 1
logger.error("FAILING BLOCK DUE TO %s SAVED AS %s", str(ex), fname)
count += max_files_per_block
files_to_publish_next = dbsFiles_f[count:count+max_files_per_block]
if len(files_to_publish_next) < max_files_per_block:
publish_in_next_iteration.extend([f["SourceLFN"] for f in files_to_publish_next])
#publish_in_next_iteration.extend([f["lfn"].replace("/store","/store/temp") for f in files_to_publish_next])
break
published = [x for x in published if x not in failed + publish_in_next_iteration]
# Fill number of files/blocks published for this dataset.
final['files'] = len(dbsFiles) - len(failed) - len(publish_in_next_iteration)
final['blocks'] = block_count
# Print a publication status summary for this dataset.
msg = "End of publication status:"
msg += " failed %s" % len(failed)
if verbose:
msg += ": %s" % failed
msg += ", published %s" % len(published)
if verbose:
msg += ": %s" % published
msg += ", publish_in_next_iteration %s" % len(publish_in_next_iteration)
if verbose:
msg += ": %s" % publish_in_next_iteration
msg += ", results %s" % (final)
logger.info(msg)
try:
if published:
mark_good(published, crabServer, logger)
data['workflow'] = taskname
data['subresource'] = 'updatepublicationtime'
crabServer.post(api='task', data=encodeRequest(data))
if failed:
logger.debug("Failed files: %s ", failed)
mark_failed(failed, crabServer, logger, failure_reason)
except Exception as ex:
logger.exception("Status update failed: %s", ex)
summary = {}
summary['taskname'] = taskname
summary['result'] = 'OK' if not failed else 'FAIL'
summary['reason'] = '' if not failed else 'DBS Publication Failure'
summary['publishedBlocks'] = publishedBlocks
summary['failedBlocks'] = failedBlocks
summary['failedBlockDumps'] = dumpList
summary['publishedFiles'] = len(published)
summary['failedFiles'] = len(failed)
summary['nextIterFiles'] = len(publish_in_next_iteration)
summaryFileName = saveSummaryJson(logdir, summary)
return summaryFileName
class Master(object):
"""I am the main daemon kicking off all Publisher work via slave Publishers"""
def __init__(self, confFile=None, quiet=False, debug=True, testMode=False):
"""
Initialise class members
:arg WMCore.Configuration config: input Publisher configuration
:arg bool quiet: it tells if a quiet logger is needed
:arg bool debug: it tells if needs a verbose logger
:arg bool testMode: it tells if to run in test (no subprocesses) mode.
"""
def createLogdir(dirname):
""" Create the directory dirname ignoring erors in case it exists. Exit if
the directory cannot be created.
"""
try:
os.makedirs(dirname)
except OSError as ose:
if ose.errno != 17: #ignore the "Directory already exists error"
print(str(ose))
print(
"The Publisher Worker needs to access the '%s' directory"
% dirname)
sys.exit(1)
def setRootLogger(logsDir, quiet=False, debug=True, console=False):
"""Sets the root logger with the desired verbosity level
The root logger logs to logs/log.txt and every single
logging instruction is propagated to it (not really nice
to read)
:arg bool quiet: it tells if a quiet logger is needed
:arg bool debug: it tells if needs a verbose logger
:arg bool console: it tells if to direct all printoput to console rather then files, useful for debug
:return logger: a logger with the appropriate logger level."""
createLogdir(logsDir)
createLogdir(os.path.join(logsDir, 'processes'))
createLogdir(os.path.join(logsDir, 'tasks'))
if console:
# if we are testing log to the console is easier
logging.getLogger().addHandler(logging.StreamHandler())
else:
logHandler = MultiProcessingLog(os.path.join(
logsDir, 'log.txt'),
when='midnight')
logFormatter = logging.Formatter(
"%(asctime)s:%(levelname)s:%(module)s,%(lineno)d:%(message)s"
)
logHandler.setFormatter(logFormatter)
logging.getLogger().addHandler(logHandler)
loglevel = logging.INFO
if quiet:
loglevel = logging.WARNING
if debug:
loglevel = logging.DEBUG
logging.getLogger().setLevel(loglevel)
logger = setMasterLogger()
logger.debug("PID %s.", os.getpid())
logger.debug("Logging level initialized to %s.", loglevel)
return logger
def logVersionAndConfig(config=None, logger=None):
"""
log version number and major config. parameters
args: config : a configuration object loaded from file
args: logger : the logger instance to use
"""
pubstartDict = {}
pubstartDict['version'] = __version__
pubstartDict['asoworker'] = config.General.asoworker
pubstartDict['instance'] = config.General.instance
if config.General.instance == 'other':
pubstartDict['restHost'] = config.General.restHost
pubstartDict['dbInstance'] = config.General.dbInstance
pubstartDict['max_slaves'] = config.General.max_slaves
pubstartDict['DBShost'] = config.TaskPublisher.DBShost
pubstartDict['dryRun'] = config.TaskPublisher.dryRun
# one line for automatic parsing
logger.info('PUBSTART: %s', json.dumps(pubstartDict))
# multiple lines for humans to read
for k, v in pubstartDict.items():
logger.info('%s: %s', k, v)
return
self.configurationFile = confFile # remember this, will have to pass it to TaskPublish
config = loadConfigurationFile(confFile)
self.config = config.General
self.TPconfig = config.TaskPublisher
# these are used for talking to DBS
os.putenv('X509_USER_CERT', self.config.serviceCert)
os.putenv('X509_USER_KEY', self.config.serviceKey)
self.block_publication_timeout = self.config.block_closure_timeout
self.lfn_map = {}
self.force_publication = False
self.force_failure = False
self.TestMode = testMode
self.taskFilesDir = self.config.taskFilesDir
createLogdir(self.taskFilesDir)
createLogdir(os.path.join(self.taskFilesDir, 'FailedBlocks'))
self.logger = setRootLogger(self.config.logsDir,
quiet=quiet,
debug=debug,
console=self.TestMode)
logVersionAndConfig(config, self.logger)
from WMCore.Credential.Proxy import Proxy
proxy = Proxy({'logger': self.logger})
from ServerUtilities import tempSetLogLevel
with tempSetLogLevel(self.logger, logging.ERROR):
self.myDN = proxy.getSubjectFromCert(
certFile=self.config.serviceCert)
try:
instance = self.config.instance
except:
msg = "No instance provided: need to specify config.General.instance in the configuration"
raise ConfigException(msg)
if instance in SERVICE_INSTANCES:
self.logger.info('Will connect to CRAB service: %s', instance)
restHost = SERVICE_INSTANCES[instance]['restHost']
dbInstance = SERVICE_INSTANCES[instance]['dbInstance']
else:
msg = "Invalid instance value '%s'" % instance
raise ConfigException(msg)
if instance == 'other':
self.logger.info(
'Will use restHost and dbInstance from config file')
try:
restHost = self.config.restHost
dbInstance = self.config.dbInstance
except:
msg = "Need to specify config.General.restHost and dbInstance in the configuration"
raise ConfigException(msg)
self.logger.info(
'Will connect to CRAB Data Base %s instance via URL: https://%s',
dbInstance, restHost)
# CRAB REST API's
self.max_files_per_block = self.config.max_files_per_block
self.crabServer = CRABRest(hostname=restHost,
localcert=self.config.serviceCert,
localkey=self.config.serviceKey,
retry=3,
userAgent='CRABPublisher')
self.crabServer.setDbInstance(dbInstance=dbInstance)
self.startTime = time.time()
def active_tasks(self, crabserver):
"""
:param crabserver: CRABRest object to access proper REST as createdin __init__ method
TODO detail here the strucutre it returns
:return: a list tuples [(task,info)]. One element for each task which has jobs to be published
each list element has the format (task, info) where task and info are lists
task=[] a set fo 4 attributes formatted as a list of strings:
[username, usergroup, userrole, taskname]
this is a subset of the information present in each element of thee next list !
info=[filedic1, filedic2, filedic3...] a list of dictionaries,one per file with keys:
u'username', u'cache_url', u'source_lfn', u'publication_state', u'destination',
u'user_role', u'last_update', u'input_dataset', u'dbs_url', u'aso_worker',
u'user_group', u'taskname', u'transfer_state', u'destination_lfn'
"""
self.logger.debug("Retrieving publications from oracleDB")
filesToPublish = []
asoworkers = self.config.asoworker
# asoworkers can be a string or a list of strings
# but if it is a string, do not turn it into a list of chars !
asoworkers = [asoworkers] if isinstance(asoworkers,
basestring) else asoworkers
for asoworker in asoworkers:
self.logger.info(
"Processing publication requests for asoworker: %s", asoworker)
fileDoc = {}
fileDoc['asoworker'] = asoworker
fileDoc['subresource'] = 'acquirePublication'
data = encodeRequest(fileDoc)
try:
result = crabserver.post(api='filetransfers', data=data) # pylint: disable=unused-variable
except Exception as ex:
self.logger.error(
"Failed to acquire publications from crabserver: %s", ex)
return []
self.logger.debug(
"Retrieving max.100000 acquired publications from oracleDB")
fileDoc = dict()
fileDoc['asoworker'] = asoworker
fileDoc['subresource'] = 'acquiredPublication'
fileDoc['grouping'] = 0
fileDoc['limit'] = 100000
data = encodeRequest(fileDoc)
try:
results = crabserver.get(api='filetransfers', data=data)
except Exception as ex:
self.logger.error(
"Failed to acquire publications from crabserver: %s", ex)
return []
files = oracleOutputMapping(results)
self.logger.info(
"%s acquired publications retrieved for asoworker %s",
len(files), asoworker)
filesToPublish.extend(files)
# TODO: join query for publisher (same of submitter)
unique_tasks = [
list(i) for i in set(
tuple([
x['username'], x['user_group'], x['user_role'],
x['taskname']
]) for x in filesToPublish if x['transfer_state'] == 3)
]
info = []
for task in unique_tasks:
info.append(
[x for x in filesToPublish if x['taskname'] == task[3]])
return zip(unique_tasks, info)
def getPublDescFiles(self, workflow, lfn_ready, logger):
"""
Download and read the files describing what needs to be published
CRAB REST does not have any good way to select from the DB only what we need
most efficient way is to get full list for the task, and then trim it here
see: https://github.com/dmwm/CRABServer/issues/6124
"""
out = []
dataDict = {}
dataDict['taskname'] = workflow
dataDict['filetype'] = 'EDM'
data = encodeRequest(dataDict)
try:
res = self.crabServer.get(api='filemetadata', data=data)
# res is a 3-plu: (result, exit code, status)
res = res[0]
except Exception as ex:
logger.error(
"Error during metadata retrieving from crabserver:\n%s", ex)
return out
metadataList = [json.loads(md) for md in res['result']
] # CRAB REST returns a list of JSON objects
for md in metadataList:
# pick only the metadata we need
if md['lfn'] in lfn_ready:
out.append(md)
logger.info('Got filemetadata for %d LFNs', len(out))
return out
def algorithm(self):
"""
1. Get a list of files to publish from the REST and organize by taskname
2. For each taks get a suitably sized input for publish
3. Submit the publish to a subprocess
"""
self.startTime = time.time()
tasks = self.active_tasks(self.crabServer)
# example code, uncomment to pick only one task
# myTask='180912_142016:arizzi_crab_NanoDnRMXDYJetsToLL_M-105To160_TuneCUETP8M1_13TeV-amcaRunIISummer16MiniAODv2-PUMorio__heIV_v6-v22201'
# tasksToDo=[]
# for t in tasks:
# if t[0][3]==myTask:
# tasksToDo.append(t)
# tasks = tasksToDo
maxSlaves = self.config.max_slaves
self.logger.info(
'kicking off pool for %s tasks using up to %s concurrent slaves',
len(tasks), maxSlaves)
#self.logger.debug('list of tasks %s', [x[0][3] for x in tasks])
## print one line per task with the number of files to be published. Allow to find stuck tasks
self.logger.debug(' # of acquired files : taskname')
for task in tasks:
taskName = task[0][3]
acquiredFiles = len(task[1])
flag = '(***)' if acquiredFiles > 1000 else ' ' # mark suspicious tasks
self.logger.debug('%s %5d : %s', flag, acquiredFiles, taskName)
processes = []
try:
for task in tasks:
taskname = str(task[0][3])
# this IF is for testing on preprod or dev DB's, which are full of old unpublished tasks
if int(taskname[0:4]) < 2008:
self.logger.info(
"Skipped %s. Ignore tasks created before August 2020.",
taskname)
continue
username = task[0][0]
if username in self.config.skipUsers:
self.logger.info("Skipped user %s task %s", username,
taskname)
continue
if self.TestMode:
self.startSlave(
task) # sequentially do one task after another
continue
else: # deal with each task in a separate process
p = Process(target=self.startSlave, args=(task, ))
p.start()
self.logger.info('Starting process %s pid=%s', p, p.pid)
self.logger.info('PID %s will work on task %s', p.pid,
taskname)
processes.append(p)
if len(processes) == maxSlaves:
while len(processes) == maxSlaves:
# wait until one process has completed
time.sleep(10)
for proc in processes:
if not proc.is_alive():
self.logger.info('Terminated: %s pid=%s', proc,
proc.pid)
processes.remove(proc)
except Exception:
self.logger.exception("Error during process mapping")
self.logger.info(
'No more tasks to care for. Wait for remaining %d processes to terminate',
len(processes))
while (processes):
time.sleep(10)
for proc in processes:
if not proc.is_alive():
self.logger.info('Terminated: %s pid=%s', proc, proc.pid)
processes.remove(proc)
self.logger.info("Algorithm iteration completed")
self.logger.info("Wait %d sec for next cycle", self.pollInterval())
newStartTime = time.strftime(
"%H:%M:%S", time.localtime(time.time() + self.pollInterval()))
# BEWARE: any change to message in next line needs to be synchronized with
# a change in Publisher/stop.sh otherwise that script will break
self.logger.info("Next cycle will start at %s", newStartTime)
def startSlave(self, task):
"""
start a slave process to deal with publication for a single task
:param task: one tupla describing a task as returned by active_tasks()
:return: 0 It will always terminate normally, if publication fails it will mark it in the DB
"""
# TODO: lock task!
# - process logger
logger = setSlaveLogger(str(task[0][3]))
logger.info("Process %s is starting. PID %s", task[0][3], os.getpid())
self.force_publication = False
workflow = str(task[0][3])
if len(task[1]) > self.max_files_per_block:
self.force_publication = True
msg = "All datasets have more than %s ready files." % (
self.max_files_per_block)
msg += " No need to retrieve task status nor last publication time."
logger.info(msg)
else:
msg = "At least one dataset has less than %s ready files." % (
self.max_files_per_block)
logger.info(msg)
# Retrieve the workflow status. If the status can not be retrieved, continue
# with the next workflow.
workflow_status = ''
msg = "Retrieving status"
logger.info(msg)
data = encodeRequest({'workflow': workflow})
try:
res = self.crabServer.get(api='workflow', data=data)
except Exception as ex:
logger.warn(
'Error retrieving status from crabserver for %s:\n%s',
workflow, str(ex))
return 0
try:
workflow_status = res[0]['result'][0]['status']
msg = "Task status is %s." % workflow_status
logger.info(msg)
except ValueError:
msg = "Workflow removed from WM."
logger.error(msg)
workflow_status = 'REMOVED'
except Exception as ex:
msg = "Error loading task status!"
msg += str(ex)
msg += str(traceback.format_exc())
logger.error(msg)
# If the workflow status is terminal, go ahead and publish all the ready files
# in the workflow.
if workflow_status in ['COMPLETED', 'FAILED', 'KILLED', 'REMOVED']:
self.force_publication = True
if workflow_status in ['KILLED', 'REMOVED']:
self.force_failure = True
msg = "Considering task status as terminal. Will force publication."
logger.info(msg)
# Otherwise...
else: ## TODO put this else in a function like def checkForPublication()
msg = "Task status is not considered terminal."
logger.info(msg)
msg = "Getting last publication time."
logger.info(msg)
# Get when was the last time a publication was done for this workflow (this
# should be more or less independent of the output dataset in case there are
# more than one).
last_publication_time = None
data = encodeRequest({
'workflow': workflow,
'subresource': 'search'
})
try:
result = self.crabServer.get(api='task', data=data)
logger.debug("task: %s ", str(result[0]))
last_publication_time = getColumn(result[0],
'tm_last_publication')
except Exception as ex:
logger.error("Error during task doc retrieving:\n%s", ex)
if last_publication_time:
date = last_publication_time # datetime in Oracle format
timetuple = datetime.strptime(
date, "%Y-%m-%d %H:%M:%S.%f").timetuple(
) # convert to time tuple
last_publication_time = time.mktime(
timetuple) # convert to seconds since Epoch (float)
msg = "Last publication time: %s." % str(last_publication_time)
logger.debug(msg)
# If this is the first time a publication would be done for this workflow, go
# ahead and publish.
if not last_publication_time:
self.force_publication = True
msg = "There was no previous publication. Will force publication."
logger.info(msg)
# Otherwise...
else:
last = last_publication_time
msg = "Last published block time: %s" % last
logger.debug(msg)
# If the last publication was long time ago (> our block publication timeout),
# go ahead and publish.
now = int(time.time()) - time.timezone
time_since_last_publication = now - last
hours = int(time_since_last_publication / 60 / 60)
minutes = int(
(time_since_last_publication - hours * 60 * 60) / 60)
timeout_hours = int(self.block_publication_timeout / 60 /
60)
timeout_minutes = int((self.block_publication_timeout -
timeout_hours * 60 * 60) / 60)
msg = "Last publication was %sh:%sm ago" % (hours, minutes)
if time_since_last_publication > self.block_publication_timeout:
self.force_publication = True
msg += " (more than the timeout of %sh:%sm)." % (
timeout_hours, timeout_minutes)
msg += " Will force publication."
else:
msg += " (less than the timeout of %sh:%sm)." % (
timeout_hours, timeout_minutes)
msg += " Not enough to force publication."
logger.info(msg)
# logger.info(task[1])
try:
if self.force_publication:
# - get info
active_ = [{
'key': [
x['username'], x['user_group'], x['user_role'],
x['taskname']
],
'value': [
x['destination'], x['source_lfn'],
x['destination_lfn'], x['input_dataset'], x['dbs_url'],
x['last_update']
]
} for x in task[1] if x['transfer_state'] == 3
and x['publication_state'] not in [2, 3, 5]]
lfn_ready = []
wf_jobs_endtime = []
pnn, input_dataset, input_dbs_url = "", "", ""
for active_file in active_:
job_end_time = active_file['value'][5]
if job_end_time:
wf_jobs_endtime.append(
int(job_end_time) - time.timezone)
source_lfn = active_file['value'][1]
dest_lfn = active_file['value'][2]
self.lfn_map[dest_lfn] = source_lfn
if not pnn or not input_dataset or not input_dbs_url:
pnn = str(active_file['value'][0])
input_dataset = str(active_file['value'][3])
input_dbs_url = str(active_file['value'][4])
lfn_ready.append(dest_lfn)
username = task[0][0]
# Get metadata
toPublish = []
toFail = []
publDescFiles_list = self.getPublDescFiles(
workflow, lfn_ready, logger)
for file_ in active_:
metadataFound = False
for doc in publDescFiles_list:
# logger.info(type(doc))
# logger.info(doc)
if doc["lfn"] == file_["value"][2]:
doc["User"] = username
doc["Group"] = file_["key"][1]
doc["Role"] = file_["key"][2]
doc["UserDN"] = self.myDN
doc["Destination"] = file_["value"][0]
doc["SourceLFN"] = file_["value"][1]
toPublish.append(doc)
metadataFound = True
break
# if we failed to find metadata mark publication as failed to avoid to keep looking
# at same files over and over
if not metadataFound:
toFail.append(file_["value"][1])
with open(self.taskFilesDir + workflow + '.json',
'w') as outfile:
json.dump(toPublish, outfile)
logger.debug(
'Unitarity check: active_:%d toPublish:%d toFail:%d',
len(active_), len(toPublish), len(toFail))
if len(toPublish) + len(toFail) != len(active_):
logger.error("SOMETHING WRONG IN toPublish vs toFail !!")
if toFail:
logger.info(
'Did not find useful metadata for %d files. Mark as failed',
len(toFail))
from ServerUtilities import getHashLfn
nMarked = 0
for lfn in toFail:
source_lfn = lfn
docId = getHashLfn(source_lfn)
data = dict()
data['asoworker'] = self.config.asoworker
data['subresource'] = 'updatePublication'
data['list_of_ids'] = docId
data['list_of_publication_state'] = 'FAILED'
data['list_of_retry_value'] = 1
data[
'list_of_failure_reason'] = 'File type not EDM or metadata not found'
try:
result = self.crabServer.post(
api='filetransfers', data=encodeRequest(data))
#logger.debug("updated DocumentId: %s lfn: %s Result %s", docId, source_lfn, result)
except Exception as ex:
logger.error(
"Error updating status for DocumentId: %s lfn: %s",
docId, source_lfn)
logger.error("Error reason: %s", ex)
nMarked += 1
#if nMarked % 10 == 0:
logger.info('marked %d files as Failed', nMarked)
# find the location in the current environment of the script we want to run
import Publisher.TaskPublish as tp
taskPublishScript = tp.__file__
cmd = "python %s " % taskPublishScript
cmd += " --configFile=%s" % self.configurationFile
cmd += " --taskname=%s" % workflow
if self.TPconfig.dryRun:
cmd += " --dry"
logger.info("Now execute: %s", cmd)
stdout, stderr, exitcode = executeCommand(cmd)
if exitcode != 0:
errorMsg = 'Failed to execute command: %s.\n StdErr: %s.' % (
cmd, stderr)
raise Exception(errorMsg)
else:
logger.info('TaskPublishScript done : %s', stdout)
jsonSummary = stdout.split()[-1]
with open(jsonSummary, 'r') as fd:
summary = json.load(fd)
result = summary['result']
reason = summary['reason']
taskname = summary['taskname']
if result == 'OK':
if reason == 'NOTHING TO DO':
logger.info('Taskname %s is OK. Nothing to do',
taskname)
else:
msg = 'Taskname %s is OK. Published %d files in %d blocks.' % \
(taskname, summary['publishedFiles'], summary['publishedBlocks'])
if summary['nextIterFiles']:
msg += ' %d files left for next iteration.' % summary[
'nextIterFiles']
logger.info(msg)
if result == 'FAIL':
logger.error('Taskname %s : TaskPublish failed with: %s',
taskname, reason)
if reason == 'DBS Publication Failure':
logger.error(
'Taskname %s : %d blocks failed for a total of %d files',
taskname, summary['failedBlocks'],
summary['failedFiles'])
logger.error(
'Taskname %s : Failed block(s) details have been saved in %s',
taskname, summary['failedBlockDumps'])
except Exception as ex:
logger.exception("Exception when calling TaskPublish!\n%s",
str(ex))
return 0
def pollInterval(self):
"""
Decide when next polling cycle must start so that there is a start each
self.config.pollInterval seconds
:return: timeToWait: integer: the intervat time to wait before starting next cycle, in seconds
"""
now = time.time()
elapsed = int(now - self.startTime)
timeToWait = self.config.pollInterval - elapsed
timeToWait = max(timeToWait,
0) # if too muach time has passed, start now !
return timeToWait
def monitor(user, taskname, log):
""" function monitoring the Rucio replica locks of a rule
and updating db statuses accordingly
:param user: user HN name
:type user: str
:param taskname: CRAB taskname
:type taskname: str
:param log: log object
:type log: logging
"""
os.environ["X509_CERT_DIR"] = os.getcwd()
proxy = None
if os.path.exists('task_process/RestInfoForFileTransfers.json'):
with open('task_process/RestInfoForFileTransfers.json') as fp:
restInfo = json.load(fp)
proxy = os.getcwd() + "/" + restInfo['proxyfile']
log.info("Proxy: %s", proxy)
os.environ["X509_USER_PROXY"] = proxy
if not proxy:
log.info('No proxy available yet - waiting for first post-job')
return None
# Prepare user and task info for monitoring
scope = "user."+user
name = taskname
log.info("Initializing Monitor Rucio client for %s", taskname)
crabInj = CRABDataInjector("", "", scope=scope, account=user, auth_type='x509_proxy')
id_map = {}
lfn_map = {}
source_rse = {}
# create maps for lfn --> oracle id, source rse
if os.path.exists('task_process/transfers.txt'):
with open('task_process/transfers.txt', 'r') as _list:
for _data in _list.readlines():
try:
doc = json.loads(_data)
id_map.update({doc['destination_lfn']: doc['id']})
lfn_map.update({doc['id']: doc['destination_lfn']})
source_rse.update({doc['destination_lfn']: doc['source']+"_Temp"})
except Exception:
continue
if os.path.exists('task_process/transfers_direct.txt'):
with open('task_process/transfers_direct.txt', 'r') as _list:
for _data in _list.readlines():
try:
doc = json.loads(_data)
id_map.update({doc['destination_lfn']: doc['id']})
lfn_map.update({doc['id']: doc['destination_lfn']})
except Exception:
continue
# get the rule for this rucio dataset
try:
rules_ = crabInj.cli.list_did_rules(scope, name)
# {u'name': u'/store/user/dciangot/DStarToD0Pi_D0KPi_DStarFilter_TuneCP5_13TeV-pythia8-evtgen/crab_DStar_rucio_rucio_198_7/190129_085050/0000/DS2b_17_1.root', u'rse': u'T2_IT_Pisa', u'state': u'OK', u'scope': u'user.dciangot', u'rse_id': u'200b6830ca424d87a2e0ae855341b084', u'rule_id': u'4bc56a77ac6743e791dfedaa11db1e1c'}
list_good = []
list_failed = []
list_failed_tmp = []
list_stuck = []
list_update = []
rules = next(rules_)
log.debug("RULES %s", rules)
except Exception:
log.exception("Failed to retrieve rule information")
return
locks_generator = None
# get replica locks and monitor status
try:
locks_generator = crabInj.cli.list_replica_locks(rules['id'])
except Exception:
if rules['state'] == 'STUCK':
transfers = crabInj.cli.examine_replication_rule(rules['id'])['transfers']
for lfn in transfers:
list_stuck.append((lfn['name'], 'Rule STUCK.'))
else:
log.exception('Unable to get replica locks')
return
# analyze replica locks info for each file
sitename = None
# TODO: should we split in threads ?
for file_ in locks_generator:
log.debug("LOCK %s", file_)
filename = file_['name']
if filename not in id_map:
# This is needed because in Rucio we allow user to publish 2 different tasks
# within the same Rucio dataset
log.info("Skipping file from previous tasks: %s", filename)
continue
status = file_['state']
log.info("state %s", status)
sitename = file_['rse']
if status == "OK":
list_good.append(filename)
if status == "STUCK":
list_failed_tmp.append((filename, "Transfer Stuck", sitename))
if status == "REPLICATING":
try:
ftsJobID = crabInj.cli.list_request_by_did(filename, sitename, scope)["external_id"]
if ftsJobID:
list_update.append((filename, ftsJobID))
except Exception:
log.exception("Replica lock not found")
# Expose FTS job ID in case of failure (if available)
for name_ in [x[0] for x in list_failed_tmp]:
try:
ftsJobID = crabInj.cli.list_request_by_did(name_, sitename, scope)["external_id"]
if ftsJobID:
list_failed.append((name_, "FTS job ID: %s" % ftsJobID))
else:
list_failed.append((name_, "No FTS job ID available for stuck transfers. Rucio could have failed to submit FTS job."))
except Exception:
log.error("No FTS job ID available for stuck transfer %s. Rucio could have failed to submit FTS job." % name_)
list_failed.append((name_, "No FTS job ID available for stuck transfers. Rucio could have failed to submit FTS job."))
# Filter out files already staged directly from the wn
direct_files = []
if os.path.exists('task_process/transfers/registered_direct_files.txt'):
with open("task_process/transfers/registered_direct_files.txt", "r") as list_file:
direct_files = [x.split('\n')[0] for x in list_file.readlines()]
log.debug("Checking if some failed files were directly staged from wn: {0}".format(str(direct_files)))
list_failed = [x for x in list_failed if x[0] not in direct_files]
log.debug("{0} files to be marked as failed.".format(str(len(list_failed))))
try:
crabserver = CRABRest(restInfo['host'], localcert=proxy, localkey=proxy,
userAgent='CRABSchedd')
crabserver.setDbInstance(restInfo['dbInstamce'])
except Exception:
log.exception("Failed to set connection to crabserver")
return
# Mark FAILED files on the DB and remove them from dataset and rucio replicas
try:
if len(list_failed) > 0:
list_failed_name = [{'scope': scope, 'name': x[0]} for x in list_failed]
log.debug("Detaching %s" % list_failed_name)
crabInj.cli.detach_dids(scope, name, list_failed_name)
sources = list(set([source_rse[x['name']] for x in list_failed_name]))
for source in sources:
to_delete = [x for x in list_failed_name if source_rse[x['name']] == source]
log.debug("Deleting %s from %s" % (to_delete, source))
crabInj.delete_replicas(source, to_delete)
mark_failed([id_map[x[0]] for x in list_failed], [x[1] for x in list_failed], crabserver)
except ReplicaNotFound:
try:
mark_failed([id_map[x[0]] for x in list_failed], [x[1] for x in list_failed], crabserver)
except Exception:
log.exception("Failed to update status for failed files")
except Exception:
log.exception("Failed to update status for failed files")
# Mark files of STUCK rules on the DB and remove them from dataset and rucio replicas
try:
if len(list_stuck) > 0:
list_stuck_name = [{'scope': scope, 'name': x[0]} for x in list_stuck]
log.debug("Detaching %s" % list_stuck_name)
crabInj.cli.detach_dids(scope, name, list_stuck_name)
sources = list(set([source_rse[x['name']] for x in list_stuck_name]))
for source in sources:
to_delete = [x for x in list_stuck_name if source_rse[x['name']] == source]
log.debug("Deleting %s from %s" % (to_delete, source))
crabInj.delete_replicas(source, to_delete)
mark_failed([id_map[x[0]] for x in list_stuck], [x[1] for x in list_stuck], crabserver)
except ReplicaNotFound:
try:
mark_failed([id_map[x[0]] for x in list_failed], [x[1] for x in list_failed], crabserver)
except Exception:
log.exception("Failed to update status for failed files")
except Exception:
log.exception("Failed to update status for stuck rule")
# Mark successful transfers as done on oracle DB
try:
mark_transferred([id_map[x] for x in list_good], crabserver)
except Exception:
log.exception("Failed to update status for transferred files")
try:
already_list = []
list_update_filt = []
# Keep track of what has been already marked. Avoiding double updates at next iteration
if os.path.exists("task_process/transfers/submitted_files.txt"):
with open("task_process/transfers/submitted_files.txt", "r") as list_file:
for _data in list_file.readlines():
already_list.append(_data.split("\n")[0])
list_update_filt = [x for x in list_update if x not in already_list and x[0] not in direct_files]
# Insert FTS job ID in oracle DB for all the available tranfers
if len(list_update_filt) > 0:
list_update = list_update_filt
fileDoc = dict()
fileDoc['asoworker'] = 'rucio'
fileDoc['subresource'] = 'updateTransfers'
fileDoc['list_of_ids'] = [id_map[x[0]] for x in list_update]
fileDoc['list_of_transfer_state'] = ["SUBMITTED" for _ in list_update]
fileDoc['list_of_fts_instance'] = ['https://fts3-cms.cern.ch:8446/' for _ in list_update]
fileDoc['list_of_fts_id'] = [x[1] for x in list_update]
crabserver.post(api='filetransfers',
data=encodeRequest(fileDoc))
log.debug("Marked submitted %s" % [id_map[x[0]] for x in list_update])
with open("task_process/transfers/submitted_files.txt", "a+") as list_file:
for update in list_update:
log.debug("{0}\n".format(str(update)))
list_file.write("{0}\n".format(str(update)))
else:
log.info("Nothing to update (fts job ID)")
except Exception:
log.exception('Failed to update file status for FTSJobID inclusion.')
class MasterWorker(object):
"""I am the master of the TaskWorker"""
def __init__(self,
config,
logWarning,
logDebug,
sequential=False,
console=False,
name='master'):
"""Initializer
:arg WMCore.Configuration config: input TaskWorker configuration
:arg bool logWarning: it tells if a quiet logger is needed
:arg bool logDebug: it tells if needs a verbose logger
:arg bool sequential: it tells if to run in sequential (no subprocesses) mode.
:arg bool console: it tells if to log to console.
:arg string name: defines a name for the log of this master process"""
def createLogdir(dirname):
""" Create the directory dirname ignoring errors in case it exists. Exit if
the directory cannot be created.
"""
try:
os.mkdir(dirname)
except OSError as ose:
if ose.errno != 17: #ignore the "Directory already exists error"
print(str(ose))
print("The task worker need to access the '%s' directory" %
dirname)
sys.exit(1)
def createAndCleanLogDirectories(logsDir):
# it can be named with the time stamp a TW started
createLogdir(logsDir)
createLogdir(logsDir + '/tasks')
currentProcessesDir = logsDir + '/processes/'
createLogdir(currentProcessesDir)
# when running inside a container process logs will start with same
# process numbers, i.e. same name, at any container restart.
# to avoid clashes and confusion, we will put away all previous processes
# logs when a TW instance starts. To this goal each TW which runs
# creates a directory where new containers will move its logs, so
# identify LastLogs_timestamp directory
latestLogDir = None # the logs directory could be empty
files = os.listdir(currentProcessesDir)
files.sort(
reverse=True
) # if there are multiple Latest*, will hit the latest first
for f in files:
if f.startswith('Latest'):
latestLogDir = currentProcessesDir + f
break
if files and latestLogDir:
# rename from Latest to Old
oldLogsDir = latestLogDir.replace('Latest', 'Old')
shutil.move(latestLogDir, oldLogsDir)
else:
print(
"LatestLogDir not found in logs/processes, create a dummy dir to store old files"
)
oldLogsDir = currentProcessesDir + 'OldLog-Unknwown'
createLogdir(oldLogsDir)
# move process logs for latest TW run to old directory
for f in files:
if f.startswith('proc.c3id'):
shutil.move(currentProcessesDir + f, oldLogsDir)
# create a new LateastLogs directory where to store logs from this TaskWorker
YYMMDD_HHMMSS = time.strftime('%y%m%d_%H%M%S', time.localtime())
myDir = currentProcessesDir + 'LatestLogs-' + YYMMDD_HHMMSS
createLogdir(myDir)
def setRootLogger(logWarning, logDebug, console, name):
"""Sets the root logger with the desired verbosity level
The root logger logs to logsDir/twlog.txt and every single
logging instruction is propagated to it (not really nice
to read)
:arg bool logWarning: it tells if a quiet logger is needed
:arg bool logDebug: it tells if needs a verbose logger
:arg bool console: it tells if to log to console
:arg string name: define a name for the log file of this master process
:return logger: a logger with the appropriate logger level."""
# this must only done for real Master, not when it is used by TapeRecallStatus
logsDir = config.TaskWorker.logsDir
if name == 'master':
createAndCleanLogDirectories(logsDir)
if console:
logging.getLogger().addHandler(logging.StreamHandler())
else:
logHandler = MultiProcessingLog(logsDir + '/twlog.txt',
when='midnight')
logFormatter = \
logging.Formatter("%(asctime)s:%(levelname)s:%(module)s,%(lineno)d:%(message)s")
logHandler.setFormatter(logFormatter)
logging.getLogger().addHandler(logHandler)
loglevel = logging.INFO
if logWarning:
loglevel = logging.WARNING
if logDebug:
loglevel = logging.DEBUG
logging.getLogger().setLevel(loglevel)
logger = setProcessLogger(name, logsDir)
logger.info("PID %s.", os.getpid())
logger.info("Logging level initialized to %s.", loglevel)
return logger
def logVersionAndConfig(config=None, logger=None):
"""
log version number and major config. parameters
args: config : a configuration object loaded from file
args: logger : the logger instance to use
"""
twstartDict = {}
twstartDict['version'] = __version__
twstartDict['DBSHostName'] = config.Services.DBSHostName
twstartDict['name'] = config.TaskWorker.name
twstartDict['instance'] = config.TaskWorker.instance
if config.TaskWorker.instance == 'other':
twstartDict['restHost'] = config.TaskWorker.restHost
twstartDict['dbInstance'] = config.TaskWorker.dbInstance
twstartDict['nslaves'] = config.TaskWorker.nslaves
twstartDict[
'recurringActions'] = config.TaskWorker.recurringActions
# one line for automatic parsing
logger.info('TWSTART: %s', json.dumps(twstartDict))
# multiple lines for humans to read
for k, v in twstartDict.items():
logger.info('%s: %s', k, v)
return
self.STOP = False
self.TEST = sequential
self.logger = setRootLogger(logWarning, logDebug, console, name)
self.config = config
self.restHost = None
dbInstance = None
logVersionAndConfig(self.config, self.logger)
try:
instance = self.config.TaskWorker.instance
except:
msg = "No instance provided: need to specify config.TaskWorker.instance in the configuration"
raise ConfigException(msg)
if instance in SERVICE_INSTANCES:
self.logger.info('Will connect to CRAB service: %s', instance)
self.restHost = SERVICE_INSTANCES[instance]['restHost']
dbInstance = SERVICE_INSTANCES[instance]['dbInstance']
else:
msg = "Invalid instance value '%s'" % instance
raise ConfigException(msg)
if instance == 'other':
self.logger.info(
'Will use restHost and dbInstance from config file')
try:
self.restHost = self.config.TaskWorker.restHost
dbInstance = self.config.TaskWorker.dbInstance
except:
msg = "Need to specify config.TaskWorker.restHost and dbInstance in the configuration"
raise ConfigException(msg)
self.dbInstance = dbInstance
self.logger.info('Will connect via URL: https://%s/%s', self.restHost,
self.dbInstance)
#Let's increase the server's retries for recoverable errors in the MasterWorker
#60 means we'll keep retrying for 1 hour basically (we retry at 20*NUMRETRY seconds, so at: 20s, 60s, 120s, 200s, 300s ...)
self.crabserver = CRABRest(self.restHost,
self.config.TaskWorker.cmscert,
self.config.TaskWorker.cmskey,
retry=20,
logger=self.logger,
userAgent='CRABTaskWorker')
self.crabserver.setDbInstance(self.dbInstance)
self.logger.debug("Hostcert: %s, hostkey: %s",
str(self.config.TaskWorker.cmscert),
str(self.config.TaskWorker.cmskey))
# Retries for any failures
if not hasattr(self.config.TaskWorker, 'max_retry'):
self.config.TaskWorker.max_retry = 0
if not hasattr(self.config.TaskWorker, 'retry_interval'):
self.config.TaskWorker.retry_interval = [
retry * 20 * 2
for retry in range(self.config.TaskWorker.max_retry)
]
if not len(self.config.TaskWorker.retry_interval
) == self.config.TaskWorker.max_retry:
raise ConfigException(
"No correct max_retry and retry_interval specified; len of retry_interval must be equal to max_retry."
)
# use the config to pass some useful global stuff to all workers
# will use TaskWorker.cmscert/key to talk with CMSWEB
self.config.TaskWorker.envForCMSWEB = newX509env(
X509_USER_CERT=self.config.TaskWorker.cmscert,
X509_USER_KEY=self.config.TaskWorker.cmskey)
if self.TEST:
self.slaves = TestWorker(self.config, self.restHost,
self.dbInstance)
else:
self.slaves = Worker(self.config, self.restHost, self.dbInstance)
self.slaves.begin()
recurringActionsNames = getattr(self.config.TaskWorker,
'recurringActions', [])
self.recurringActions = [
self.getRecurringActionInst(name) for name in recurringActionsNames
]
def getRecurringActionInst(self, actionName):
mod = __import__('TaskWorker.Actions.Recurring.%s' % actionName,
fromlist=actionName)
return getattr(mod, actionName)(self.config.TaskWorker.logsDir)
def _lockWork(self, limit, getstatus, setstatus):
"""Today this is always returning true, because we do not want the worker to die if
the server endpoint is not avaialable.
Prints a log entry if answer is greater than 400:
* the server call succeeded or
* the server could not find anything to update or
* the server has an internal error"""
configreq = {
'subresource': 'process',
'workername': self.config.TaskWorker.name,
'getstatus': getstatus,
'limit': limit,
'status': setstatus
}
try:
#self.server.post(self.restURInoAPI + '/workflowdb', data=urllib.urlencode(configreq))
self.crabserver.post(api='workflowdb',
data=urllib.urlencode(configreq))
except HTTPException as hte:
msg = "HTTP Error during _lockWork: %s\n" % str(hte)
msg += "HTTP Headers are %s: " % hte.headers
self.logger.error(msg)
return False
except Exception: #pylint: disable=broad-except
self.logger.exception(
"Server could not process the _lockWork request (prameters are %s)",
configreq)
return False
return True
def getWork(self, limit, getstatus, ignoreTWName=False):
configreq = {
'limit': limit,
'workername': self.config.TaskWorker.name,
'getstatus': getstatus
}
if ignoreTWName:
configreq['workername'] = '%'
pendingwork = []
try:
#pendingwork = self.server.get(self.restURInoAPI + '/workflowdb', data=configreq)[0]['result']
pendingwork = self.crabserver.get(api='workflowdb',
data=configreq)[0]['result']
except HTTPException as hte:
msg = "HTTP Error during getWork: %s\n" % str(hte)
msg += "HTTP Headers are %s: " % hte.headers
self.logger.error(msg)
except Exception: #pylint: disable=broad-except
self.logger.exception(
"Server could not process the getWork request (prameters are %s)",
configreq)
return pendingwork
def quit_(self, dummyCode, dummyTraceback):
self.logger.info(
"Received kill request. Setting STOP flag in the master process..."
)
self.STOP = True
def updateWork(self, taskname, command, status):
""" Update taskname setting the status and the command for it
Return True if the change succeded, False otherwise
"""
configreq = {
'workflow': taskname,
'command': command,
'status': status,
'subresource': 'state'
}
try:
#self.server.post(self.restURInoAPI + '/workflowdb', data=urllib.urlencode(configreq))
self.crabserver.post(api='workflowdb',
data=urllib.urlencode(configreq))
except HTTPException as hte:
msg = "HTTP Error during updateWork: %s\n" % str(hte)
msg += "HTTP Headers are %s: " % hte.headers
self.logger.error(msg)
except Exception: #pylint: disable=broad-except
self.logger.exception(
"Server could not process the updateWork request (prameters are %s)",
configreq)
else:
return True #success
return False #failure
def restartQueuedTasks(self):
""" This method is used at the TW startup and it restarts QUEUED tasks
setting them back again to NEW.
"""
limit = self.slaves.nworkers * 2
total = 0
while True:
pendingwork = self.getWork(limit=limit, getstatus='QUEUED')
for task in pendingwork:
self.logger.debug("Restarting QUEUED task %s",
task['tm_taskname'])
self.updateWork(task['tm_taskname'], task['tm_task_command'],
'NEW')
if not pendingwork:
self.logger.info("Finished restarting QUEUED tasks (total %s)",
total)
break #too bad "do..while" does not exist in python...
else:
total += len(pendingwork)
self.logger.info(
"Restarted %s tasks (limit %s), getting next chunk of tasks",
len(pendingwork), limit)
def failBannedTask(self, task):
""" This method is used at the TW startup and it fails NEW tasks which I do not like
The method put those task to SUBMITFAILED, KILLFAILED, RESUBMITFAILED depending on the value of
the command field.
Initial implementation bans based on a list of usernames, other task attributes can
be checked if needed by adding a bit of code
Returns:
True : if the task was declared bad and was failed
False: for normal (good) tasks
"""
bannedUsernames = getattr(self.config.TaskWorker, 'bannedUsernames',
[])
if task['tm_username'] in bannedUsernames:
self.logger.debug("Forcefully failing task %s",
task['tm_taskname'])
if task['tm_task_command']:
dummyWorktype, failstatus = STATE_ACTIONS_MAP[
task['tm_task_command']]
else:
failstatus = 'FAILED'
self.updateWork(task['tm_taskname'], task['tm_task_command'],
failstatus)
# TODO look into logging a message for the user
return True
return False
def algorithm(self):
"""I'm the intelligent guy taking care of getting the work
and distributing it to the slave processes."""
self.logger.debug("Restarting QUEUED tasks before startup.")
self.restartQueuedTasks()
self.logger.debug("Master Worker Starting Main Cycle.")
while not self.STOP:
limit = self.slaves.queueableTasks()
if not self._lockWork(
limit=limit, getstatus='NEW', setstatus='HOLDING'):
time.sleep(self.config.TaskWorker.polling)
continue
pendingwork = self.getWork(limit=limit, getstatus='HOLDING')
if pendingwork:
keys = ['tm_task_command', 'tm_taskname']
tasksInfo = [{k: v
for k, v in task.items() if k in keys}
for task in pendingwork]
self.logger.info("Retrieved a total of %d works",
len(pendingwork))
self.logger.debug("Retrieved the following works: \n%s",
str(tasksInfo))
toInject = []
for task in pendingwork:
if self.failBannedTask(task):
continue
if self.updateWork(task['tm_taskname'],
task['tm_task_command'], 'QUEUED'):
worktype, failstatus = STATE_ACTIONS_MAP[
task['tm_task_command']]
toInject.append((worktype, task, failstatus, None))
else:
#The task stays in HOLDING and will be acquired again later
self.logger.info(
"Skipping %s since it could not be updated to QUEUED. Will be retried in the next iteration",
task['tm_taskname'])
self.slaves.injectWorks(toInject)
for action in self.recurringActions:
if action.isTimeToGo():
#Maybe we should use new slaves and not reuse the ones used for the tasks
self.logger.debug("Injecting recurring action: \n%s",
(str(action.__module__)))
self.slaves.injectWorks([(handleRecurring, {
'tm_username': '******',
'tm_taskname': action.__module__
}, 'FAILED', action.__module__)])
self.logger.info('Master Worker status:')
self.logger.info(' - free slaves: %d', self.slaves.freeSlaves())
self.logger.info(' - acquired tasks: %d',
self.slaves.queuedTasks())
self.logger.info(' - tasks pending in queue: %d',
self.slaves.pendingTasks())
time.sleep(self.config.TaskWorker.polling)
dummyFinished = self.slaves.checkFinished()
self.logger.debug("Master Worker Exiting Main Cycle.")
