Esempio n. 1
0
    def writeOutput(self):

        rootFile = radmonLumiFilePattern.replace('__XXX__', str(self.fill))
        try:
            fout = TFile(rootFile, 'RECREATE')
        except IOError:
            print "Cannot open file for output", rootFile
            exit

        t = TTree('t', 'Combined Lumi and Radmon data')

        lsData = LsData()
        radmonData = RadmonData()

        t.Branch(
            'IntBranch', lsData,
            'fill/I:fillStart/I:fillStable/I:fillEnd/I:durationStable/I:run/I:lsNo/I:lsDuration/I:tstamp/I'
        )
        t.Branch('DoubleBranch', AddressOf(lsData, 'lumi'),
                 'lumi/D:bField/D:beamEnergy/D')
        t.Branch('BeamStatus', AddressOf(lsData, 'beamStatus'), 'beamStatus/C')
        t.Branch('LumiSource', AddressOf(lsData, 'lumiSource'), 'lumiSource/C')
        t.Branch('RadmonBranch', radmonData, 'rates[16]/D:ratesErr[16]/D')

        href = self.pradmon[0]  # Reference histogram (to get bin center)

        for i in range(len(self.xx) - 1):
            lsData.fill = self.lsDataList[i].fill
            lsData.fillStart = self.lsDataList[i].fillStart
            lsData.fillStable = self.lsDataList[i].fillStable
            lsData.fillEnd = self.lsDataList[i].fillEnd
            lsData.durationStable = self.lsDataList[i].durationStable
            lsData.run = self.lsDataList[i].run
            lsData.lsNo = self.lsDataList[i].lsNo
            lsData.lsDuration = self.lsDataList[i].lsDuration
            #lsData.tstamp = self.lsDataList[i].tstamp
            lsData.lumi = self.lsDataList[i].lumi
            lsData.bField = self.lsDataList[i].bField
            lsData.beamEnergy = self.lsDataList[i].beamEnergy
            lsData.beamStatus = self.lsDataList[i].beamStatus
            lsData.lumiSource = self.lsDataList[i].lumiSource

            # move tstamp to the middle of LS
            lsData.tstamp = int(href.GetXaxis().GetBinCenter(i))
            #lsData.tstamp = self.lsDataList[i].tstamp

            for j in range(len(self.pradmon)):
                radmonData.rates[j] = self.pradmon[j].GetBinContent(i)
                radmonData.ratesErr[j] = self.pradmon[j].GetBinError(i)

            t.Fill()
        print "Writing", rootFile
        fout.Write()
        fout.Close()
        del fout
Esempio n. 2
0
    def writeOutput(self):
	
	rootFile = radmonLumiFilePattern.replace('__XXX__', str(self.fill))
	try:
	    fout = TFile(rootFile,'RECREATE')
	except IOError:
	    print "Cannot open file for output", rootFile
	    exit	 

	t = TTree('t', 'Combined Lumi and Radmon data')
	
	lsData = LsData()
	radmonData = RadmonData()

	t.Branch('IntBranch',  lsData, 'fill/I:fillStart/I:fillStable/I:fillEnd/I:durationStable/I:run/I:lsNo/I:lsDuration/I:tstamp/I')
	t.Branch('DoubleBranch', AddressOf(lsData, 'lumi'), 'lumi/D:bField/D:beamEnergy/D')
        t.Branch('BeamStatus', AddressOf(lsData, 'beamStatus'), 'beamStatus/C')
        t.Branch('LumiSource', AddressOf(lsData, 'lumiSource'), 'lumiSource/C')        
    	t.Branch('RadmonBranch',  radmonData, 'rates[16]/D:ratesErr[16]/D')
    	
    	href = self.pradmon[0]  # Reference histogram (to get bin center)

    	for i in range(len(self.xx) - 1):
            lsData.fill = self.lsDataList[i].fill
            lsData.fillStart = self.lsDataList[i].fillStart
            lsData.fillStable = self.lsDataList[i].fillStable
            lsData.fillEnd = self.lsDataList[i].fillEnd
            lsData.durationStable = self.lsDataList[i].durationStable
            lsData.run = self.lsDataList[i].run
            lsData.lsNo = self.lsDataList[i].lsNo
            lsData.lsDuration = self.lsDataList[i].lsDuration
            #lsData.tstamp = self.lsDataList[i].tstamp
            lsData.lumi = self.lsDataList[i].lumi
            lsData.bField = self.lsDataList[i].bField
            lsData.beamEnergy = self.lsDataList[i].beamEnergy
            lsData.beamStatus = self.lsDataList[i].beamStatus
            lsData.lumiSource = self.lsDataList[i].lumiSource

            # move tstamp to the middle of LS
            lsData.tstamp = int(href.GetXaxis().GetBinCenter(i))
            #lsData.tstamp = self.lsDataList[i].tstamp

	    for j in range(len(self.pradmon)):
		radmonData.rates[j] = self.pradmon[j].GetBinContent(i)
		radmonData.ratesErr[j] = self.pradmon[j].GetBinError(i)
		
	    t.Fill()
	print "Writing", rootFile
	fout.Write()
	fout.Close()
	del fout
Esempio n. 3
0
    def setupRanges(self):
	"""
	read file with lumi data 
	setup low edges of histograms corresponding to the beginning of lumisections
	fill array of timing  structures (fill, ls, run etc) corresponding to the given bin
	"""
		
	f = TFile(lumiFilePattern.replace('__XXX__', str(self.fill)))
	tree = f.Get("t")
	
	tsPrev = 0
	
	# Data from fill report file
        fillReport = FillReport(fillReportName)
	
	for i in range(0, tree.GetEntries()) :
            lsDataEntry = LsData()
	    nb = tree.GetEntry(i)
	    if nb < 0:
		continue

	    #Y range for histograms
	    if tree.lumi > self.yMax:
		 self.yMax = tree.lumi
	    if tree.lumi < self.yMin:
		 self.yMin = tree.lumi
		
	    #Setting start/end of the fill
	    if  tree.tstamp < self.fromto[0]:
		self.fromto[0] = tree.tstamp
	    if tree.tstamp > self.fromto[1]:
		self.fromto[1] = tree.tstamp

	    #Low edges for histos (start of the LS)

            
            if i > 0:
                self.lsDuration.insert(i-1, tree.tstamp - tsPrev)
                # Found negative duration of LS
                if self.lsDuration[i-1] < 0:
                    continue
            tsPrev = tree.tstamp
            self.xx.append(tree.tstamp)
            
            fill = int(tree.fill)
            # fill by-LS  data
            lsDataEntry.fill = fill
            lsDataEntry.fillStart = fillReport.getFillCreationTime(fill)
            lsDataEntry.fillStable = fillReport.getFillStableTime(fill)
            lsDataEntry.fillEnd = fillReport.getFillEndTime(fill)
            lsDataEntry.durationStable = fillReport.getFillDuration(fill)
            lsDataEntry.bField = fillReport.getFillField(fill)
            lsDataEntry.beamEnergy = tree.beamEnergy
            lsDataEntry.run = tree.run
            lsDataEntry.lsNo = tree.lsNo
            lsDataEntry.lsDuration = 0  # will be overwritten later
            lsDataEntry.tstamp = tree.tstamp
            lsDataEntry.lumi = tree.lumi # will be scaled on the second pass
            lsDataEntry.beamStatus = tree.beamStatus
            lsDataEntry.lumiSource = tree.lumiSource
            
            self.lsDataList.append(lsDataEntry)
            del lsDataEntry
	del tree
	del f
Esempio n. 4
0
    def setupRanges(self):
        """
	read file with lumi data 
	setup low edges of histograms corresponding to the beginning of lumisections
	fill array of timing  structures (fill, ls, run etc) corresponding to the given bin
	"""

        f = TFile(lumiFilePattern.replace('__XXX__', str(self.fill)))
        tree = f.Get("t")

        tsPrev = 0

        # Data from fill report file
        fillReport = FillReport(fillReportName)

        for i in range(0, tree.GetEntries()):
            lsDataEntry = LsData()
            nb = tree.GetEntry(i)
            if nb < 0:
                continue

        #Y range for histograms
            if tree.lumi > self.yMax:
                self.yMax = tree.lumi
            if tree.lumi < self.yMin:
                self.yMin = tree.lumi

        #Setting start/end of the fill
            if tree.tstamp < self.fromto[0]:
                self.fromto[0] = tree.tstamp
            if tree.tstamp > self.fromto[1]:
                self.fromto[1] = tree.tstamp

        #Low edges for histos (start of the LS)

            if i > 0:
                self.lsDuration.insert(i - 1, tree.tstamp - tsPrev)
                # Found negative duration of LS
                if self.lsDuration[i - 1] < 0:
                    continue
            tsPrev = tree.tstamp
            self.xx.append(tree.tstamp)

            fill = int(tree.fill)
            # fill by-LS  data
            lsDataEntry.fill = fill
            lsDataEntry.fillStart = fillReport.getFillCreationTime(fill)
            lsDataEntry.fillStable = fillReport.getFillStableTime(fill)
            lsDataEntry.fillEnd = fillReport.getFillEndTime(fill)
            lsDataEntry.durationStable = fillReport.getFillDuration(fill)
            lsDataEntry.bField = fillReport.getFillField(fill)
            lsDataEntry.beamEnergy = tree.beamEnergy
            lsDataEntry.run = tree.run
            lsDataEntry.lsNo = tree.lsNo
            lsDataEntry.lsDuration = 0  # will be overwritten later
            lsDataEntry.tstamp = tree.tstamp
            lsDataEntry.lumi = tree.lumi  # will be scaled on the second pass
            lsDataEntry.beamStatus = tree.beamStatus
            lsDataEntry.lumiSource = tree.lumiSource

            self.lsDataList.append(lsDataEntry)
            del lsDataEntry
        del tree
        del f