def test_41_bad_destination_for_icd_file(self):
print "\n(4.1) Test exception with a non-writable destination for ICD file.\n ",
with SuppressOutput():
self.mThermAspectConfig.cIcdFile = "/users/delete_me.txt"
newArticle = ThermAspectBuilder()
newArticle.initialize(self.mThermAspectConfig)
self.assertRaises(ThermError, newArticle.execute)
def test_31_circular_symbols(self):
print "\n(3.1) Test exception when circular reference in symbols file.\n ",
with SuppressOutput():
## Include a symbols file with a circular reference.
self.mThermAspectConfig.cSymFiles = ["symbolsTest.xml", "symbolsCircular.xml"]
newArticle = ThermAspectBuilder()
self.assertRaises(ThermError, newArticle.initialize, self.mThermAspectConfig)
def setUp(self):
## Instantiate ThermAspectConfig object.
self.mThermAspectConfig = ThermAspectConfig()
## Loop through all individual networks.
for network in tNetworks:
## Instantiate IndivNetworkConfig object.
indivNetworkConfig = IndivNetworkConfig()
## Uniform ICD variables
## Name of sim system
indivNetworkConfig.cIcdSettings.mSys = "iss"
## Name of icd bus
indivNetworkConfig.cIcdSettings.mBus = "sim_bus"
## Name of icd trick sequence, or P-value.
indivNetworkConfig.cIcdSettings.mTrickSeq = "P_PTCS "
## Name (abbreviation) of network to be built
indivNetworkConfig.cNetwork = network
## Boolean to determine if the mass of structural nodes should be adjusted to match a
## total-mass expected value.
indivNetworkConfig.cIsMassAdjustable = True
#Files to read ............................................
## Path and file name of Thermal Aspect Registry file.
indivNetworkConfig.cRegisFile = tRegisPath % network
## Path and file name of Thermal Desktop file (TdNetworkConfig).
indivNetworkConfig.cTdFile = tTdPath % (network,network)
## Path and file name of HtrRegistry file.
indivNetworkConfig.cHtrFile = tHtrPath % network
## Path and file name of ThermalPanel registry/config file.
indivNetworkConfig.cPanFile = tPanPath % network
#Files to generate ........................................
## Path and file name of Node configuration file.
indivNetworkConfig.cNodeFile = tNodePath % network
## Path and file name of Conduction configuration file.
indivNetworkConfig.cCondFile = tCondPath % network
## Path and file name of Radiation configuration file.
indivNetworkConfig.cRadFile = tRadPath % network
## Path and file name of Et.Cetera (potentials, sources) configuration file.
indivNetworkConfig.cEtcFile = tEtcPath % network
## Path and file name of TrickView file. Each network produces its own TrickView file.
indivNetworkConfig.cTvFile = tTvPath % network
## Append the newly-constructed mIndivNetworkConfig to the list of network configs.
self.mThermAspectConfig.cListNetworkConfigs.append(indivNetworkConfig)
if "dummy" == network:
#Files to read ............................................
## Path and file name of Thermal Aspect Registry file.
indivNetworkConfig.cRegisFile = None
## Path and file name of Thermal Desktop file (TdNetworkConfig).
indivNetworkConfig.cTdFile = None
## Path and file name of HtrRegistry file.
indivNetworkConfig.cHtrFile = None
## Path and file name of ThermalPanel registry/config file.
indivNetworkConfig.cPanFile = None
## Set the mIndivNetworkConfig member as the first in the above loop.
self.mIndivNetworkConfig = indivNetworkConfig
## Name of top-level script that creates the ThermAspectBuilder that creates this object.
self.mThermAspectConfig.cCallingScript = thisScript
## Assumption to use for any specific heat values (Cp) not provided directly.
self.mThermAspectConfig.cAssumedCp = 1.0
## Set ICD file
self.mThermAspectConfig.cIcdFile = tIcdFile
## Set enumeration header file.
self.mThermAspectConfig.cEnumFile = tEnumFile
## Set symbol_loading module and files to read.
self.mThermAspectConfig.cSymFiles = tSymFiles
## Instantiate an individual network indivPiece.
self.indivPiece = IndivNetworkBuilder()
## Instantiate a full-scale article with the correct paths.
self.article = ThermAspectBuilder()
self.article.initialize(self.mThermAspectConfig)
class TestThermBuilder(unittest.TestCase):
notSet = "[%s must explicitly be set]"
uninitialized = "[%s not initialized]"
def setUp(self):
## Instantiate ThermAspectConfig object.
self.mThermAspectConfig = ThermAspectConfig()
## Loop through all individual networks.
for network in tNetworks:
## Instantiate IndivNetworkConfig object.
indivNetworkConfig = IndivNetworkConfig()
## Uniform ICD variables
## Name of sim system
indivNetworkConfig.cIcdSettings.mSys = "iss"
## Name of icd bus
indivNetworkConfig.cIcdSettings.mBus = "sim_bus"
## Name of icd trick sequence, or P-value.
indivNetworkConfig.cIcdSettings.mTrickSeq = "P_PTCS "
## Name (abbreviation) of network to be built
indivNetworkConfig.cNetwork = network
## Boolean to determine if the mass of structural nodes should be adjusted to match a
## total-mass expected value.
indivNetworkConfig.cIsMassAdjustable = True
#Files to read ............................................
## Path and file name of Thermal Aspect Registry file.
indivNetworkConfig.cRegisFile = tRegisPath % network
## Path and file name of Thermal Desktop file (TdNetworkConfig).
indivNetworkConfig.cTdFile = tTdPath % (network,network)
## Path and file name of HtrRegistry file.
indivNetworkConfig.cHtrFile = tHtrPath % network
## Path and file name of ThermalPanel registry/config file.
indivNetworkConfig.cPanFile = tPanPath % network
#Files to generate ........................................
## Path and file name of Node configuration file.
indivNetworkConfig.cNodeFile = tNodePath % network
## Path and file name of Conduction configuration file.
indivNetworkConfig.cCondFile = tCondPath % network
## Path and file name of Radiation configuration file.
indivNetworkConfig.cRadFile = tRadPath % network
## Path and file name of Et.Cetera (potentials, sources) configuration file.
indivNetworkConfig.cEtcFile = tEtcPath % network
## Path and file name of TrickView file. Each network produces its own TrickView file.
indivNetworkConfig.cTvFile = tTvPath % network
## Append the newly-constructed mIndivNetworkConfig to the list of network configs.
self.mThermAspectConfig.cListNetworkConfigs.append(indivNetworkConfig)
if "dummy" == network:
#Files to read ............................................
## Path and file name of Thermal Aspect Registry file.
indivNetworkConfig.cRegisFile = None
## Path and file name of Thermal Desktop file (TdNetworkConfig).
indivNetworkConfig.cTdFile = None
## Path and file name of HtrRegistry file.
indivNetworkConfig.cHtrFile = None
## Path and file name of ThermalPanel registry/config file.
indivNetworkConfig.cPanFile = None
## Set the mIndivNetworkConfig member as the first in the above loop.
self.mIndivNetworkConfig = indivNetworkConfig
## Name of top-level script that creates the ThermAspectBuilder that creates this object.
self.mThermAspectConfig.cCallingScript = thisScript
## Assumption to use for any specific heat values (Cp) not provided directly.
self.mThermAspectConfig.cAssumedCp = 1.0
## Set ICD file
self.mThermAspectConfig.cIcdFile = tIcdFile
## Set enumeration header file.
self.mThermAspectConfig.cEnumFile = tEnumFile
## Set symbol_loading module and files to read.
self.mThermAspectConfig.cSymFiles = tSymFiles
## Instantiate an individual network indivPiece.
self.indivPiece = IndivNetworkBuilder()
## Instantiate a full-scale article with the correct paths.
self.article = ThermAspectBuilder()
self.article.initialize(self.mThermAspectConfig)
def test_11_construction(self):
print "\n(1.1) Test generic construction.\n ",
newPiece = IndivNetworkBuilder()
self.assertEqual(newPiece.mRegisFile, self.uninitialized % "mRegisFile")
self.assertEqual(newPiece.mTdFile, self.uninitialized % "mTdFile")
self.assertEqual(newPiece.mNodeFile, self.uninitialized % "mNodeFile")
self.assertEqual(newPiece.mCondFile, self.uninitialized % "mCondFile")
self.assertEqual(newPiece.mRadFile, self.uninitialized % "mRadFile")
self.assertEqual(newPiece.mHtrFile, self.uninitialized % "mHtrFile")
self.assertEqual(newPiece.mPanFile, self.uninitialized % "mPanFile")
self.assertEqual(newPiece.mEtcFile, self.uninitialized % "mEtcFile")
self.assertEqual(newPiece.mTvFile, self.uninitialized % "mTvFile")
## @test Cannot execute on uninitialized article.
with SuppressOutput():
self.assertRaises(ThermError, newPiece.execute)
def test_12_initialization(self):
print "\n(1.2) Test initialize().\n ",
self.assertEqual(self.article.mSymFiles, tSymFiles)
self.assertEqual(self.article.mIcdFile, tIcdFile)
self.assertEqual(self.article.mEnumFile, tEnumFile)
self.assertEqual(self.article.mIndivNetworkBuilders[-1].mRegisFile, tRegisPath % tNetwork)
self.assertEqual(self.article.mIndivNetworkBuilders[-1].mTdFile, tTdPath % (tNetwork,tNetwork))
self.assertEqual(self.article.mIndivNetworkBuilders[-1].mNodeFile, tNodePath % tNetwork)
self.assertEqual(self.article.mIndivNetworkBuilders[-1].mCondFile, tCondPath % tNetwork)
self.assertEqual(self.article.mIndivNetworkBuilders[-1].mRadFile, tRadPath % tNetwork)
self.assertEqual(self.article.mIndivNetworkBuilders[-1].mHtrFile, tHtrPath % tNetwork)
self.assertEqual(self.article.mIndivNetworkBuilders[-1].mPanFile, tPanPath % tNetwork)
self.assertEqual(self.article.mIndivNetworkBuilders[-1].mEtcFile, tEtcPath % tNetwork)
self.assertEqual(self.article.mIndivNetworkBuilders[-1].mTvFile, tTvPath % tNetwork)
def test_21_no_tdNetworkConfig_file(self):
print "\n(2.1) Test exception when tdNetworkConfig file cannot be loaded.\n ",
with SuppressOutput():
self.mIndivNetworkConfig.cTdFile = "td_file_doesnt_exist"
self.indivPiece.initialize(self.mIndivNetworkConfig)
self.assertRaises(ThermError, self.indivPiece.execute)
def test_22_no_ThermRegistry_file(self):
print "\n(2.2) Test exception when ThermRegistry file cannot be loaded.\n ",
with SuppressOutput():
self.mIndivNetworkConfig.cRegisFile = "registry_file_doesnt_exist"
self.indivPiece.initialize(self.mIndivNetworkConfig)
self.assertRaises(ThermError, self.indivPiece.execute)
def test_23_execute_before_initialize(self):
print "\n(2.3) Test exception when IndivNetworkBuilder executed before initialized.\n ",
with SuppressOutput():
self.assertRaises(ThermError, self.indivPiece.execute)
def test_24_registry_not_well_formed(self):
print "\n(2.4) Test exception when ThermRegistry not well formed.\n ",
with SuppressOutput():
self.mIndivNetworkConfig.cRegisFile = "ThermRegistry_notwellformed.xml"
self.indivPiece.initialize(self.mIndivNetworkConfig)
self.assertRaises(ThermError, self.indivPiece.execute)
def test_31_circular_symbols(self):
print "\n(3.1) Test exception when circular reference in symbols file.\n ",
with SuppressOutput():
## Include a symbols file with a circular reference.
self.mThermAspectConfig.cSymFiles = ["symbolsTest.xml", "symbolsCircular.xml"]
newArticle = ThermAspectBuilder()
self.assertRaises(ThermError, newArticle.initialize, self.mThermAspectConfig)
def test_41_bad_destination_for_icd_file(self):
print "\n(4.1) Test exception with a non-writable destination for ICD file.\n ",
with SuppressOutput():
self.mThermAspectConfig.cIcdFile = "/users/delete_me.txt"
newArticle = ThermAspectBuilder()
newArticle.initialize(self.mThermAspectConfig)
self.assertRaises(ThermError, newArticle.execute)
def test_51_execution(self):
print "\n(5.1) Test execution.\n ",
capExplicit = "0"
radEntries = None
radCoeffRegis = ""
radCoeffTd = ""
try:
self.article.execute()
## Check mass calculation
parser = XmlParser()
data = parser.loadFile(tNodePath % tNetwork)
## Open it for reading and save its xml data.
entries = parser.getElements(data, "node")
## Loop through each source entry, totaling the mass.
massSum = 0;
for entry in entries:
## Create and initialize XmlEntryAnalyzer object.
mass = parser.getChildText(entry, "mass")
massSum = massSum + float(mass)
## Store capacitance of a specific node in question.
if "GOOD_EXPLICIT_12" == parser.getChildText(entry, "name"):
capExplicit = parser.getChildText(entry, "capacitance")
## Read radiation data for testing.
radData = parser.loadFile(tRadPath % tNetwork)
radEntries = parser.getElements(radData, "radiation")
## Check radiation coefficients.
radCoeffTd = parser.getChildText(radEntries[0], "coefficient")
radCoeffRegis = parser.getChildText(radEntries[1], "coefficient")
except (Exception), e:
print e
self.fail("Uncaught exception during execute().")
## Test correct number of nodes.
self.assertEqual(len(self.article.mIndivNetworkBuilders[-1].masterNodeList), tNumNodes)
## Test capacitance of node that should have been overwritten by an explicity symbol.
self.assertAlmostEqual(float(capExplicit), tCapExplicit)
## Test that mass was appropriately scaled to match the given total.
self.assertAlmostEqual(massSum, tTotalMass, 1)
## Test correct number of panels.
self.assertEqual(len(self.article.mIndivNetworkBuilders[-1].mPanList), tNumPanels)
## Test correct number of radiation links.
self.assertEqual(len(radEntries), tNumRadLinks)
## Test correct radiation coefficients.
self.assertAlmostEqual(float(radCoeffRegis), tRadCoeffRegis)
self.assertAlmostEqual(float(radCoeffTd), tRadCoeffTd)
## Nullify unneeded files in the HX network.
if 'hx' == network:
indivNetworkConfig.cTdFile = None
indivNetworkConfig.cHtrFile = indivNetworkConfig.cHtrFile.replace(
'HtrRegis', 'SrcRegis')
indivNetworkConfig.cPanFile = None
## Change the HX to operate at a higher rate
indivNetworkConfig.cIcdSettings.mPtcsRate = "HX_RATE"
## Append the newly-constructed mIndivNetworkConfig to the list of network configs.
thermAspectConfig.cListNetworkConfigs.append(indivNetworkConfig)
try:
## Instantiate, initialize, and execute the ThermAspectBuilder.
builder = ThermAspectBuilder()
builder.initialize(thermAspectConfig)
builder.execute()
except Exception, e:
## Build error message, checking first to see if colors are enabled.
if sys.stdout.isatty():
# print in red
print "\033[31mERROR!!!!!!!!!!!!!!!\033[0m",
else:
# print normal
print "ERROR!!!!!!!!!!!!!!!!!!!!!!!!!!",
print e
print "Building of PTCS networks has FAILED.\n"
print "======================================================================"