def final_scroll_delay(configElement):
if BoxInfo.getItem("VFDDelay"):
fileWriteLine(BoxInfo.getItem("VFD_final_scroll_delay"),
hex(int(configElement.value)))
else:
fileWriteLine(BoxInfo.getItem("VFD_final_scroll_delay"),
configElement.value)
def setPower(self, value):
if exists("/proc/stb/power/vfd"):
print("[Lcd] setLCDPower='%s'." % value)
fileWriteLine("/proc/stb/power/vfd", value)
elif exists("/proc/stb/lcd/vfd"):
print("[Lcd] setLCDPower='%s'." % value)
fileWriteLine("/proc/stb/lcd/vfd", value)
def activateTimezone(self, zone, area, runCallbacks=True):
tz = zone if area in ("Classic", "Generic") else pathjoin(area, zone)
file = pathjoin(TIMEZONE_DATA, tz)
if not isfile(file):
print("[Timezones] Error: The time zone '%s' is not available! Using 'UTC' instead." % tz)
tz = "UTC"
file = pathjoin(TIMEZONE_DATA, tz)
print("[Timezones] Setting time zone to '%s'." % tz)
try:
unlink("/etc/localtime")
except (IOError, OSError) as err:
if err.errno != ENOENT: # No such file or directory.
print("[Timezones] Error %d: Unlinking '/etc/localtime'! (%s)" % (err.errno, err.strerror))
try:
symlink(file, "/etc/localtime")
except (IOError, OSError) as err:
print("[Timezones] Error %d: Linking '%s' to '/etc/localtime'! (%s)" % (err.errno, file, err.strerror))
fileWriteLine("/etc/timezone", "%s\n" % tz, source=MODULE_NAME)
environ["TZ"] = ":%s" % tz
try:
tzset()
except Exception:
from enigma import e_tzset
e_tzset()
if exists("/proc/stb/fp/rtc_offset"):
setRTCoffset()
timeFormat = "%a %d-%b-%Y %H:%M:%S"
print("[Timezones] Local time is '%s' - UTC time is '%s'." % (strftime(timeFormat, localtime(None)), strftime(timeFormat, gmtime(None))))
if runCallbacks:
for callback in self.callbacks:
callback()
def lcdLiveTvChanged(configElement):
if "live_enable" in BoxInfo.getItem("LcdLiveTV"):
fileWriteLine(
BoxInfo.getItem("LcdLiveTV"),
configElement.value and "enable" or "disable")
else:
fileWriteLine(BoxInfo.getItem("LcdLiveTV"),
configElement.value and "0" or "1")
try:
InfoBarInstance = InfoBar.instance
InfoBarInstance and InfoBarInstance.session.open(
dummyScreen)
except:
pass
def setFPWakeuptime(wutime):
if not fileWriteLine("/proc/stb/fp/wakeup_time", str(wutime), source=MODULE_NAME):
try:
with open("/dev/dbox/fp0") as fd:
ioctl(fd.fileno(), 6, pack('L', wutime)) # Set wake up time.
except (IOError, OSError) as err:
print("[StbHardware] Error %d: Unable to write to '/dev/dbox/fp0', setFPWakeuptime failed! (%s)" % (err.errno, err.strerror))
def clearFPWasTimerWakeup():
if not fileWriteLine("/proc/stb/fp/was_timer_wakeup", "0", source=MODULE_NAME):
try:
with open("/dev/dbox/fp0") as fd:
ioctl(fd.fileno(), 10)
except (IOError, OSError) as err:
print("[StbHardware] Error %d: Unable to update '/dev/dbox/fp0', clearFPWasTimerWakeup failed! (%s)" % (err.errno, err.strerror))
def getFPWasTimerWakeup(check=False):
global wasTimerWakeup
isError = False
if wasTimerWakeup is not None:
if check:
return wasTimerWakeup, isError
return wasTimerWakeup
wasTimerWakeup = fileReadLine("/proc/stb/fp/was_timer_wakeup",
source=MODULE_NAME)
if wasTimerWakeup is not None:
wasTimerWakeup = int(wasTimerWakeup) and True or False
if not fileWriteLine("/tmp/was_timer_wakeup.txt",
str(wasTimerWakeup),
source=MODULE_NAME):
try:
with open("/dev/dbox/fp0") as fd:
wasTimerWakeup = unpack('B', ioctl(
fd.fileno(), 9, ' '))[0] and True or False
except (IOError, OSError) as err:
isError = True
print(
"[StbHardware] Error %d: Unable to read '/dev/dbox/fp0', getFPWasTimerWakeup failed! (%s)"
% (err.errno, err.strerror))
else:
wasTimerWakeup = False
if wasTimerWakeup:
clearFPWasTimerWakeup() # Clear hardware status.
if check:
return wasTimerWakeup, isError
return wasTimerWakeup
def setRTCoffset(forsleep=None):
forsleep = 7200 + timezone if localtime().tm_isdst == 0 else 3600 - timezone
# t_local = localtime(int(time())) # This line does nothing!
# Set RTC OFFSET (diff. between UTC and Local Time)
if fileWriteLine("/proc/stb/fp/rtc_offset", str(forsleep), source=MODULE_NAME):
print("[StbHardware] Set RTC offset to %s sec." % forsleep)
else:
print("[StbHardware] Error: Write to '/proc/stb/fp/rtc_offset' failed!")
def setRTCtime(wutime):
if exists("/proc/stb/fp/rtc_offset"):
setRTCoffset()
if not fileWriteLine("/proc/stb/fp/rtc", str(wutime), source=MODULE_NAME):
try:
with open("/dev/dbox/fp0") as fd:
ioctl(fd.fileno(), 0x101, pack('L', wutime)) # Set time.
except (IOError, OSError) as err:
print("[StbHardware] Error %d: Unable to write to '/dev/dbox/fp0', setRTCtime failed! (%s)" % (err.errno, err.strerror))
def setRTCoffset():
forsleep = (localtime(time()).tm_hour - gmtime(time()).tm_hour) * 3600
if fileWriteLine("/proc/stb/fp/rtc_offset",
str(forsleep),
source=MODULE_NAME):
print("[StbHardware] Set RTC offset to %s sec." % forsleep)
else:
print(
"[StbHardware] Error: Write to '/proc/stb/fp/rtc_offset' failed!")
def jobTask(self):
linkState = 0
if exists("/sys/class/net/wlan0/operstate"):
linkState = fileReadLine("/sys/class/net/wlan0/operstate")
if linkState != "down":
linkState = fileReadLine("/sys/class/net/wlan0/carrier")
elif exists("/sys/class/net/eth0/operstate"):
linkState = fileReadLine("/sys/class/net/eth0/operstate")
if linkState != "down":
linkState = fileReadLine("/sys/class/net/eth0/carrier")
linkState = linkState[:1]
if exists("/proc/stb/lcd/symbol_network"
) and config.lcd.mode.value == "1":
fileWriteLine("/proc/stb/lcd/symbol_network", linkState)
elif exists("/proc/stb/lcd/symbol_network"
) and config.lcd.mode.value == "0":
fileWriteLine("/proc/stb/lcd/symbol_network", "0")
USBState = 0
for bus in busses():
devices = bus.devices
for dev in devices:
if dev.deviceClass != 9 and dev.deviceClass != 2 and dev.idVendor != 3034 and dev.idVendor > 0:
USBState = 1
if exists("/proc/stb/lcd/symbol_usb"):
fileWriteLine("/proc/stb/lcd/symbol_usb", USBState)
self.timer.startLongTimer(30)
def finished(self, gotoStep=None, *args, **kwargs):
print("[Wizard] In finished.")
currStep = self.currStep
if self.updateValues not in self.onShown:
self.onShown.append(self.updateValues)
if self.showConfig:
if self.wizard[currStep]["config"]["type"] == "dynamic":
eval("self." + self.wizard[currStep]["config"]["evaluation"])()
if self.showList:
if len(self.wizard[currStep]["evaluatedlist"]) > 0:
print("[Wizard] current: '%s'." % str(self["list"].current))
nextStep = self["list"].current[1]
if "listevaluation" in self.wizard[currStep]:
exec("self." +
self.wizard[self.currStep]["listevaluation"] + "('" +
nextStep + "')")
else:
self.currStep = self.getStepWithID(nextStep)
print_now = True
if (currStep == self.numSteps
and self.wizard[currStep]["nextstep"] is None
) or self.wizard[currStep]["id"] == "end": # wizard finished
print("[Wizard] Wizard finished.")
self.markDone()
self.exit()
else:
self.codeafter = True
self.runCode(self.wizard[currStep]["codeafter"])
self.prevStep = currStep
self.gotoStep = gotoStep
if not self.runCode(self.wizard[currStep]["codeafter_async"]):
self.afterAsyncCode()
else:
if self.updateValues in self.onShown:
self.onShown.remove(self.updateValues)
fileWriteLine("/proc/progress", "100")
if print_now:
print("[Wizard] Now: '%s'." % str(self.currStep))
def setXcoreVFD(configElement):
if exists("/sys/module/brcmstb_osmega/parameters/pt6302_cgram"):
fileWriteLine(
"/sys/module/brcmstb_osmega/parameters/pt6302_cgram",
configElement.value)
if exists("/sys/module/brcmstb_spycat4k/parameters/pt6302_cgram"):
fileWriteLine(
"/sys/module/brcmstb_spycat4k/parameters/pt6302_cgram",
configElement.value)
if exists(
"/sys/module/brcmstb_spycat4kmini/parameters/pt6302_cgram"
):
fileWriteLine(
"/sys/module/brcmstb_spycat4kmini/parameters/pt6302_cgram",
configElement.value)
if exists(
"/sys/module/brcmstb_spycat4kcombo/parameters/pt6302_cgram"
):
fileWriteLine(
"/sys/module/brcmstb_spycat4kcombo/parameters/pt6302_cgram",
configElement.value)
def setPower4x7Suspend(configElement):
if exists("/proc/stb/fp/power4x7suspend"):
fileWriteLine("/proc/stb/fp/power4x7suspend",
"on" if configElement.value else "off")
def setPower4x7Standby(configElement):
if exists("/proc/stb/fp/power4x7standby"):
fileWriteLine("/proc/stb/fp/power4x7standby",
"on" if configElement.value else "off")
def setLedFadeControlColor(configElement):
if exists("/proc/stb/fp/led_fade"):
fileWriteLine("/proc/stb/fp/led_fade", configElement.value)
def setLedColorControlColor(configElement):
if exists("/proc/stb/fp/led_color"):
fileWriteLine("/proc/stb/fp/led_color", configElement.value)
def setLedBrightnessControl(configElement):
if exists("/proc/stb/fp/led_brightness"):
fileWriteLine("/proc/stb/fp/led_brightness",
configElement.value)
def setLedBlinkControlColor(configElement):
if exists("/proc/stb/fp/led_blink"):
fileWriteLine("/proc/stb/fp/led_blink", configElement.value)
def setLCDMiniTVFPS(self, value):
if exists("/proc/stb/lcd/fps"):
print("[Lcd] setLCDMiniTVFPS='%s'." % value)
fileWriteLine("/proc/stb/lcd/fps", value)
def setLedStandbyColor(configElement):
if exists("/proc/stb/fp/ledstandbycolor"):
fileWriteLine("/proc/stb/fp/ledstandbycolor",
configElement.value)
def setLedPowerColor(configElement):
if exists("/proc/stb/fp/ledpowercolor"):
fileWriteLine("/proc/stb/fp/ledpowercolor",
configElement.value)
def setPowerLEDdeepstanbystate(configElement):
if exists("/proc/stb/power/suspendled"):
fileWriteLine("/proc/stb/power/suspendled",
"on" if configElement.value else "off")
def writeRemoteControlType(self, rcType):
if rcType > 0:
fileWriteLine("/proc/stb/ir/rc/type", rcType, source=MODULE_NAME)
def setLCDModeMinitTV(configElement):
print("[Lcd] setLCDModeMinitTV='%s'." % configElement.value)
fileWriteLine("/proc/stb/lcd/mode", configElement.value)
def setLedSuspendColor(configElement):
if exists("/proc/stb/fp/ledsuspendledcolor"):
fileWriteLine("/proc/stb/fp/ledsuspendledcolor",
configElement.value)
def setMiniTVFPS(configElement):
print("[Lcd] setMiniTVFPS='%s'." % configElement.value)
fileWriteLine("/proc/stb/lcd/fps", configElement.value)
def setLCDMiniTVMode(self, value):
if exists("/proc/stb/lcd/mode"):
print("[Lcd] setLCDMiniTVMode='%s'." % value)
fileWriteLine("/proc/stb/lcd/mode", value)
def profile(checkPoint):
now = time() - profileStart
if profileFd:
profileFd.write("%7.3f\t%s\n" % (now, checkPoint))
if checkPoint in profileData:
timeStamp = profileData[checkPoint]
if totalTime:
percentage = timeStamp * (PERCENTAGE_END - PERCENTAGE_START
) / totalTime + PERCENTAGE_START
else:
percentage = PERCENTAGE_START
if model == "axodin":
fileWriteLine("/dev/dbox/oled0",
"%d" % percentage,
source=MODULE_NAME)
elif model == "beyonwizu4":
fileWriteLine("/dev/dbox/oled0",
"Loading %d%%\n" % percentage,
source=MODULE_NAME)
elif model in ("gb800solo", "gb800se", "gb800seplus", "gbultrase"):
fileWriteLine("/dev/mcu",
"%d \n" % percentage,
source=MODULE_NAME)
elif model in ("sezammarvel", "xpeedlx3", "atemionemesis"):
fileWriteLine("/proc/vfd",
"Loading %d%% " % percentage,
source=MODULE_NAME)
elif model in ("ebox5000", "osmini", "spycatmini", "osminiplus",
"spycatminiplus"):
fileWriteLine("/proc/progress",
"%d" % percentage,
source=MODULE_NAME)
elif isfile("/proc/progress"):
fileWriteLine("/proc/progress",
"%d \n" % percentage,
source=MODULE_NAME)
def setPowerLEDstate2(configElement):
if exists("/proc/stb/power/powerled2"):
fileWriteLine("/proc/stb/power/powerled2",
"on" if configElement.value else "off")