# here, the (default) top sequence is used:
from AthenaCommon.AlgSequence import AlgSequence
job = AlgSequence()
### Create the Menu ###
#######################
include("TrigSteering/pureSteering_menu.py")
### Setup TrigConfigSvc ###
####################################
from TrigConfigSvc.TrigConfigSvcConfig import SetupTrigConfigSvc
log.info("setting up TrigConfigSvc:")
svc = SetupTrigConfigSvc()
svc.hltXmlFile = 'pureSteering_menu.xml'
svc.l1XmlFile = 'l1.xml'
try:
svc.SetStates( 'xml' )
except:
log.warning( 'failed to set state of TrigConfigSvc ...')
try:
svc.InitialiseSvc()
except:
log.warning( 'failed to activate TrigConfigSvc ...')
ServiceMgr.TrigConfigSvc.OutputLevel=VERBOSE
ServiceMgr.HLTConfigSvc.OutputLevel=VERBOSE
ServiceMgr.LVL1ConfigSvc.OutputLevel=VERBOSE
import MuonCnvExample.MuonCablingConfig
import MuonRecExample.MuonReadCalib
include("MuonRecExample/MuonRecLoadTools.py")
#######################
### MENUS AND STUFF ###
#######################
from TriggerMenuPython.GenerateMenu import GenerateMenu
GenerateMenu().generate()
from TrigConfigSvc.TrigConfigSvcConfig import SetupTrigConfigSvc
_svc = SetupTrigConfigSvc()
_svc.l1XmlFile = TriggerFlags.inputLVL1configFile() if TriggerFlags.readLVL1configFromXML() \
else TriggerFlags.outputLVL1configFile()
_svc.hltXmlFile = TriggerFlags.inputHLTconfigFile() if TriggerFlags.readHLTconfigFromXML() \
else TriggerFlags.outputHLTconfigFile()
try:
_svc.SetStates(["xml"])
except:
log.error('Failed to set state of TrigConfigSvc to ["xml"]')
else:
log.info('State of TrigConfigSvc set to ["xml"]')
try:
#"""
#roifile=open("Lvl1Results.txt", "w")
#for i in xrange(0,repeat):
# roifile.write(RoIs)
#roifile.write("\n")
#roifile.close()
#if "useBusyEventSetup" not in dir():
# useBusyEventSetup=False
### Setup TrigConfigSvc ###
####################################
from TrigConfigSvc.TrigConfigSvcConfig import SetupTrigConfigSvc
log.info("setting up TrigConfigSvc:")
svc = SetupTrigConfigSvc()
svc.hltXmlFile = 'hlttest.xml'
svc.l1topoXmlFile = 'TopoTestMenu.xml'
svc.l1XmlFile = 'l1test.xml'
try:
svc.SetStates('xml')
except:
log.warning('failed to set state of TrigConfigSvc ...')
try:
svc.InitialiseSvc()
except:
log.warning('failed to activate TrigConfigSvc ...')
ServiceMgr.TrigConfigSvc.OutputLevel = VERBOSE
ServiceMgr.HLTConfigSvc.OutputLevel = VERBOSE
# setup Lvl1
# initialize LVL1ConfigSvc
log.info("configuring LVL1 (L1Topo and CTP)")
from TriggerJobOpts.Lvl1TriggerOnlineGetter import Lvl1SimulationGetter
lvl1 = Lvl1SimulationGetter()
if globalflags.InputFormat() == 'pool':
log.info("setting up transient BS")
TriggerFlags.doTransientByteStream = True
include("TriggerJobOpts/jobOfragment_TransBS_standalone.py")
# setup HLT
# initialize HLT config svc
from TrigConfigSvc.TrigConfigSvcConfig import SetupTrigConfigSvc
log.info('Creating the trigger configuration service wrapper')
svc = SetupTrigConfigSvc()
if TriggerFlags.readL1TopoConfigFromXML():
svc.l1topoXmlFile = TriggerFlags.inputL1TopoConfigFile() # given XML
else:
svc.l1topoXmlFile = TriggerFlags.outputL1TopoConfigFile(
) # generated in python
if TriggerFlags.readLVL1configFromXML():
svc.l1XmlFile = TriggerFlags.inputLVL1configFile() # given XML
else:
svc.l1XmlFile = TriggerFlags.outputLVL1configFile() # generated in python
if TriggerFlags.readHLTconfigFromXML():
svc.hltXmlFile = TriggerFlags.inputHLTconfigFile() # given XML
else:
svc.hltXmlFile = TriggerFlags.outputHLTconfigFile() # generated in python
def _setupConfig():
rf = {}
rf['readTAG'] = jp.Rec.readTAG()
rf['readESD'] = jp.Rec.readESD()
rf['readAOD'] = jp.Rec.readAOD()
rf['readBS'] = jp.Rec.Trigger.readBS()
rf['readRDO'] = jp.Rec.readRDO()
rf['DataSource'] = jp.Global.DataSource()
rf['readRDO'] = jp.Rec.readRDO()
rf['doWriteESD'] = jp.Rec.doWriteESD()
rf['doWriteAOD'] = jp.Rec.doWriteAOD()
rf['doWriteTAG'] = jp.Rec.doWriteTAG()
rf['TrigCoolSQLite'] = False
global readRDO
print "global readRDO=", readRDO
varInit = globals().keys()
print varInit
print rf.keys()
for o in [o for o in rf.keys() if o in varInit]:
rf[o] = eval(o)
#print "JJJJ DEBUG Print jobproperties"
#jp.print_JobProperties('tree&value')
#print "JJJJ DEBUG Print rec.jobproperties"
#jp.Rec.print_JobProperties('tree&value')
#print "JJJJ DEBUG Print rec.Trigger.jobproperties aka TriggerFlags"
#jp.Rec.Trigger.print_JobProperties('tree&value')
## logging for this module
msg = log.getLogger('TriggerConfig.py')
## the generic trigger configuration service needs to be set up
from TrigConfigSvc.TrigConfigSvcConfig import SetupTrigConfigSvc
msg.info('Creating the trigger configuration service wrapper')
svc = SetupTrigConfigSvc()
## ================================================================================
## the service depends on the condition we are running in
##
## environment ConfigSvc Data input Config input Flags
## --------------- ------------ ---------- ------------ -----
## (1) data taking HLTConfigSvc BS TriggerDB DataSource='data',...
##
## (2) MC simulation HTLConfigSvc BS, RDO XML DataSource='geant3/4' and (readBS=True or readRDO=True) and doFEX=True and doHypo=True
## (to be replaced by DSConfigSvc later)
##
## (3) data processing DSConfigSvc BS, RDO COOL/Oracle readBS=True or readRDO=True
##
## (4) AOD processing DSConfigSvc ESD/AOD ESD/AOD(run) (readESD=True or readAOD=True) and doFEX=False and doHypo=False
## AODConfigSvc ESD/AOD(ev)
##
## (5) Trigger ESD/AOD HLTConfigSvc ESD/AOD XML (readESD or readAOD)=True and doFEX=True and doHypo=True
##
## (6) Trigger rerun HLTConfigSvc ESD/AOD XML (readBS or readRDO or readESD or readAOD)=True and doFEX=False and doHypo=True
##
## (7) TAG reading HLTConfigSvc TAG XML readTAG=True
##
##
## ================================================================================
## In cases (2), (3) and (5) the configuration information needs to be written
## into the header of the AOD file. This is completely independent of the configuration
## service, but will depend on the flags readESD, readAOD, doWriteESD, doWriteAOD, doWriteTAG
##
## ================================================================================
## two flags are steering the execution of the trigger, if neither
## is True, no trigger is used
##
## - doTrigger: if True, "TriggerRelease/jobOfragment_forRecExCommon.py"
## is included
##
## - doTriggerConfigOnly: if True, no TrigDecision is build/used
##
## ================================================================================
## flags that control the setup of the trigger are
##
## boolean:
## readBS, readAOD, readESD, readRDO, readTAG
## writeBS, doWriteAOD, doWriteESD, doWriteRDO, doWriteTAG
## readLVL1configFromXML, readHLTconfigFromXML
##
## string:
## inputHLTconfigFile, inputLVL1configFile, outputHLTconfigFile, outputLVL1configFile
##
## on/offline:
## DataSource: ['data','geant3','geant4']
## ================================================================================
svc.hltXmlFile = lv1_menu_file_name = jp.Rec.Trigger.inputHLTconfigFile()
svc.l1XmlFile = jp.Rec.Trigger.inputLVL1configFile()
myList = []
scenario = 0
if len(jp.Rec.Trigger.configurationSourceList()) > 0:
# take the user-defined list of trigger configuration sources:
myList = jp.Rec.Trigger.configurationSourceList()
else:
print jp.Rec
if rf['readTAG']: # TAG
myList = ['xml']
elif rf['readESD'] or rf['readAOD']: # AOD/ESD
myList = ['ds', 'aod', 'xml']
elif rf['readBS'] or rf['readRDO']: # RDO/BS
if rf['DataSource'] == 'data':
myList = ['ds', 'xml']
else:
myList = ['xml']
else:
msg.fatal('no reading of BS, RDO, AOD, ESD, or TAG specified')
message = 'setup the following services in order: '
for s in myList:
message += s + " "
msg.info(message)
try:
svc.SetStates(myList)
except:
msg.error('failed to set state of TrigConfigSvc ...')
try:
svc.InitialiseSvc()
except:
msg.error('failed to activate TrigConfigSvc ...')
if rf['doWriteESD'] or rf['doWriteAOD'] or rf['doWriteTAG'] or ('ds'
in myList):
## setup the copying of configuration data from input to output metadatastore
if rf['doWriteESD'] or rf['doWriteAOD'] or rf['doWriteTAG']:
msg.info(
'writing of ESD, AOD, or TAG requested, will setup IOVDbSvc to access configuration meta data'
)
else:
msg.info(
'DSConfigSvc enabled, will setup IOVDbSvc to access configuration meta data'
)
# first we need a new algorithm that triggers the copying
from AthenaCommon.AlgSequence import AlgSequence
from TrigConfigSvc.TrigConfigSvcConf import TrigConf__TrigConfDataIOVChanger as TrigConfDataIOVChanger
topAlgs = AlgSequence()
TrigConfDataIOVChanger = TrigConfDataIOVChanger(
'TrigConfDataIOVChanger')
topAlgs += TrigConfDataIOVChanger
from AthenaCommon.AppMgr import ServiceMgr as svcMgr
from AthenaCommon.AppMgr import ToolSvc
if not hasattr(ToolSvc, 'IOVDbMetaDataTool'):
from IOVDbMetaDataTools.IOVDbMetaDataToolsConf import IOVDbMetaDataTool
ToolSvc += IOVDbMetaDataTool("IOVDbMetaDataTool")
if not hasattr(svcMgr, 'MetaDataSvc'):
from EventSelectorAthenaPool.EventSelectorAthenaPoolConf import MetaDataSvc
svcMgr += MetaDataSvc("MetaDataSvc")
svcMgr.MetaDataSvc.MetaDataContainer = "MetaDataHdr"
svcMgr.MetaDataSvc.MetaDataTools += ["IOVDbMetaDataTool"]
# for debugging uncomment the following three lines
from AthenaCommon.Constants import VERBOSE
ToolSvc.IOVDbMetaDataTool.OutputLevel = VERBOSE
svcMgr.MetaDataSvc.OutputLevel = VERBOSE
dbConnection = "<dbConnection>impl=cool;techno=oracle;schema=ATLAS_COOLONL_READER;devdb10:COOLTEST:atlas_trig_stelzer</dbConnection>"
### when moving to configurable IOVDbSvc use the ### lines and remove those with ## at the end
### import IOVDbSvc.IOVDb
### IOVDbSvc = svcMgr.IOVDbSvc
from AthenaCommon.Include import include ##
include("IOVDbSvc/IOVDbSvc_jobOptions.py") ##
IOVDbSvc = theApp.service("IOVDbSvc") ##
#from AthenaCommon.Constants import VERBOSE
#IOVDbSvc.OutputLevel = VERBOSE
## if we process MC from an XML file the dbConnection needs to
## be set to a local SQlite file
if (rf['readRDO'] or rf['readBS']) and (rf['DataSource'] == 'geant3'
or rf['DataSource'] == 'geant4'
or rf['TrigCoolSQLite']):
from TrigConfigSvc.TrigConf2COOL import theConfCOOLWriter
dbConnection = theConfCOOLWriter.dbConnection
theConfCOOLWriter.isWritingNeeded = True
TrigConfDataIOVChanger.AdjustIOV = True
msg.info("COOL DBConnection: " + dbConnection)
### svcMgr.IOVDbSvc.Folders+=[dbConnection + "/TRIGGER/HLT/Menu <tag>HEAD</tag>"]
### svcMgr.IOVDbSvc.Folders+=[dbConnection + "/TRIGGER/HLT/HltConfigKeys <tag>HEAD</tag>"]
### svcMgr.IOVDbSvc.Folders+=[dbConnection + "/TRIGGER/LVL1/Lvl1ConfigKey <tag>HEAD</tag>"]
### svcMgr.IOVDbSvc.Folders+=[dbConnection + "/TRIGGER/LVL1/Menu <tag>HEAD</tag>"]
### svcMgr.IOVDbSvc.Folders+=[dbConnection + "/TRIGGER/LVL1/Prescales <tag>HEAD</tag>"]
### svcMgr.IOVDbSvc.Folders+=[dbConnection + "/TRIGGER/LVL1/ItemDef <tag>HEAD</tag>"]
### svcMgr.IOVDbSvc.Folders+=[dbConnection + "/TRIGGER/HLT/Prescales <tag>HEAD</tag>"]
### svcMgr.IOVDbSvc.Folders+=[dbConnection + "/TRIGGER/HLT/PrescaleKey <tag>HEAD</tag>"]
IOVDbSvc.Folders += [
dbConnection + "/TRIGGER/HLT/Menu <tag>HEAD</tag>"
] ##
IOVDbSvc.Folders += [
dbConnection + "/TRIGGER/HLT/HltConfigKeys <tag>HEAD</tag>"
] ##
IOVDbSvc.Folders += [
dbConnection + "/TRIGGER/LVL1/Lvl1ConfigKey <tag>HEAD</tag>"
] ##
IOVDbSvc.Folders += [
dbConnection + "/TRIGGER/LVL1/Menu <tag>HEAD</tag>"
] ##
IOVDbSvc.Folders += [
dbConnection + "/TRIGGER/LVL1/Prescales <tag>HEAD</tag>"
] ##
IOVDbSvc.Folders += [
dbConnection + "/TRIGGER/LVL1/ItemDef <tag>HEAD</tag>"
] ##
IOVDbSvc.Folders += [
dbConnection + "/TRIGGER/HLT/Prescales <tag>HEAD</tag>"
] ##
IOVDbSvc.Folders += [
dbConnection + "/TRIGGER/HLT/PrescaleKey <tag>HEAD</tag>"
] ##
# only in jobs that write AOD or ESD
if rf['doWriteAOD'] or rf['doWriteESD']:
msg.info(
'writing of ESD or AOD enabled, will setup IOVDbSvc to write configuration meta data'
)
### svcMgr.IOVDbSvc.FoldersToMetaData+=["/TRIGGER/HLT/Menu"]
### svcMgr.IOVDbSvc.FoldersToMetaData+=["/TRIGGER/HLT/HltConfigKeys"]
### svcMgr.IOVDbSvc.FoldersToMetaData+=["/TRIGGER/LVL1/Lvl1ConfigKey"]
### svcMgr.IOVDbSvc.FoldersToMetaData+=["/TRIGGER/LVL1/Menu"]
### svcMgr.IOVDbSvc.FoldersToMetaData+=["/TRIGGER/LVL1/Prescales"]
### svcMgr.IOVDbSvc.FoldersToMetaData+=["/TRIGGER/LVL1/ItemDef"]
### svcMgr.IOVDbSvc.FoldersToMetaData+=["/TRIGGER/HLT/Prescales"]
### svcMgr.IOVDbSvc.FoldersToMetaData+=["/TRIGGER/HLT/PrescaleKey"]
IOVDbSvc.FoldersToMetaData += ["/TRIGGER/HLT/Menu"] ##
IOVDbSvc.FoldersToMetaData += ["/TRIGGER/HLT/HltConfigKeys"] ##
IOVDbSvc.FoldersToMetaData += ["/TRIGGER/LVL1/Lvl1ConfigKey"] ##
IOVDbSvc.FoldersToMetaData += ["/TRIGGER/LVL1/Menu"] ##
IOVDbSvc.FoldersToMetaData += ["/TRIGGER/LVL1/Prescales"] ##
IOVDbSvc.FoldersToMetaData += ["/TRIGGER/LVL1/ItemDef"] ##
IOVDbSvc.FoldersToMetaData += ["/TRIGGER/HLT/Prescales"] ##
IOVDbSvc.FoldersToMetaData += ["/TRIGGER/HLT/PrescaleKey"] ##
tdt = CfgMgr.Trig__TrigDecisionTool(OutputLevel=Lvl.INFO)
toolSvc += tdt
from RecExConfig.RecFlags import rec
rec.readAOD = True
from TriggerJobOpts.TriggerFlags import TriggerFlags
TriggerFlags.doTriggerConfigOnly = True
## setup configuration service
from TrigConfigSvc.TrigConfigSvcConfig import DSConfigSvc, SetupTrigConfigSvc
dscfg = DSConfigSvc()
dscfg.OutputLevel = Lvl.VERBOSE
svcMgr += dscfg
trigcfg = SetupTrigConfigSvc()
trigcfg.OutputLevel = Lvl.VERBOSE
trigcfg.SetStates('ds')
trigcfg.InitialiseSvc()
#svcMgr += trigcfg
#theApp.ReflexPluginDebugLevel = 1000
## configure the job to write out POOL files
import AthenaPoolCnvSvc.WriteAthenaPool
## create an output stream
job += CfgMgr.AthenaOutputStream('OutStream',
WritingTool="AthenaOutputStreamTool")
# Copy everything from the input and must force reading of all input
# objects
job.OutStream.OutputFile = OUTPUT
chain.addStreamTag('fake')
menu.addHLTChain(chain)
chain = HLTChain('SingleMC_Jet', '6', 'DummyL2_Jet', 'EF')
chain.addHLTSignature( 'EFInDet_Jet' )
chain.addTriggerTypeBit(34)
chain.addStreamTag('jets')
menu.addHLTChain(chain)
menu.writeConfigFiles()
### Setup TrigConfigSvc ###
####################################
from TrigConfigSvc.TrigConfigSvcConfig import SetupTrigConfigSvc
log.info("setting up TrigConfigSvc:")
svc = SetupTrigConfigSvc()
svc.hltXmlFile = 'newMenu.xml'
svc.l1XmlFile = 'lvl1Menu.xml'
try:
svc.SetStates( 'xml' )
except:
log.warning( 'failed to set state of TrigConfigSvc ...')
try:
svc.InitialiseSvc()
except:
log.warning( 'failed to activate TrigConfigSvc ...')
ServiceMgr.TrigConfigSvc.OutputLevel=VERBOSE
ServiceMgr.HLTConfigSvc.OutputLevel=VERBOSE
ServiceMgr.LVL1ConfigSvc.OutputLevel=VERBOSE
CheckRate = 1000,
doPositiveEndcap = True,
doNegativeEndcap = True)
if jobproperties.Beam.beamType()=='collisions' and hasattr(ToolSvc, 'DQFilledBunchFilterTool'):
InDetSCTErrMonTool.FilterTools.append(monFilledBunchFilterTool)
ToolSvc += InDetSCTErrMonTool
if (InDetFlags.doPrintConfigurables()):
print InDetSCTErrMonTool
if not hasattr(ServiceMgr,"TrigConfigSvc"):
from TrigConfigSvc.TrigConfigSvcConfig import SetupTrigConfigSvc
trigconfigsvc= SetupTrigConfigSvc()
trigconfigsvc.SetStates('ds')
trigconfigsvc.InitialiseSvc()
pass
from TrigBunchCrossingTool.BunchCrossingTool import BunchCrossingTool
SCT_BunchCrossingTool = BunchCrossingTool()
from SCT_Monitoring.SCT_MonitoringConf import SCTHitEffMonTool
InDetSCTHitEffMonTool = SCTHitEffMonTool(name = "InDetSCTHitEffMonTool",
DetectorMode = 3,
OutputLevel = 4,
IsCosmic = InDetFlags.doCosmics(),
UseMasks = False,
LookAtDatabase = False,
class TriggerConfigGetter(Configured):
""" This class brings to the job Trigger Configuration.
"""
_environment = ""
def __init__(self, environment=""):
log = logging.getLogger("TriggerConfigGetter.py")
if environment:
log.info('Initialize (environment "%s")' % environment)
else:
log.info('Initialize (interpreting rec and trigger flags)')
self._environment = environment
super(TriggerConfigGetter, self).__init__() # calls configure
def checkFileMetaData(self):
log = logging.getLogger("TriggerConfigGetter.py")
from RecExConfig.InputFilePeeker import inputFileSummary
self.hasLBwiseHLTPrescalesAndL1ItemDef = True
if rec.readESD() or rec.readAOD() or "ReadPool" in self._environment:
self.hasLBwiseHLTPrescalesAndL1ItemDef = inputFileSummary[
'metadata'].has_key(
'/TRIGGER/HLT/Prescales'
) # they were all added at the same time (Repro with 15.6.3.2 Prod)
# protection against early runs
if inputFileSummary.has_key(
'run_number'
) and self._environment == "" and globalflags.DataSource(
) == 'data' and rec.readRDO() and any(
[run < 134230 for run in inputFileSummary['run_number']]):
self.hasLBwiseHLTPrescalesAndL1ItemDef = False
if self.hasLBwiseHLTPrescalesAndL1ItemDef:
log.info("Using LB-wise HLT prescales")
else:
log.info("Using run-wise HLT prescales")
def checkInput(self):
self.checkFileMetaData()
log = logging.getLogger("TriggerConfigGetter.py")
if "ReadPool" in self._environment or "WritePool" in self._environment:
log.info(
"Flags are ignored, since 'ReadPool' or 'WritePool' is specified"
)
return True
if rec.readESD() or rec.readAOD(
): # and globalflags.DataSource()=='data': # need this for MC as well
protectedInclude("TrigTier0/TriggerConfigCheckMetadata.py")
if rec.readRDO() and globalflags.InputFormat(
) == 'bytestream' and globalflags.DataSource() == 'data':
protectedInclude("TrigTier0/TriggerConfigCheckHLTpsk.py")
log.info("The following flags are set:")
log.info("globalflags.InputFormat : %s" %
globalflags.InputFormat())
log.info(
"rec.read.* : RDO: %s, ESD: %s, AOD: %s, TAG: %s"
% (rec.readRDO(), rec.readESD(), rec.readAOD(), rec.readTAG()))
log.info(
"rec.doWrite.* : ESD: %s, AOD: %s, TAG: %s" %
(rec.doWriteESD(), rec.doWriteAOD(), rec.doWriteTAG()))
log.info("globalflags.DataSource : %s" %
globalflags.DataSource())
log.info("TriggerFlags.configForStartup : %s" %
TriggerFlags.configForStartup())
log.info("TriggerFlags.dataTakingConditions : %s" %
TriggerFlags.dataTakingConditions())
log.info("TriggerFlags.configurationSourceList: %s" %
TriggerFlags.configurationSourceList())
count = len(
[1 for x in [rec.readRDO(
), rec.readESD(), rec.readAOD()]
if x]) #readTAG is only set with another input
if count == 0:
log.warning("Don't know what the input format is.")
return False
if count >= 2:
log.warning(
"More than one input format specified, please set only the appropriate one."
)
return False
return True
def setConfigSvcConnParams(self, connectionParameters):
sl = []
if hasattr(svcMgr, 'L1TopoConfigSvc'): sl += [svcMgr.L1TopoConfigSvc]
if hasattr(svcMgr, 'LVL1ConfigSvc'): sl += [svcMgr.LVL1ConfigSvc]
if hasattr(svcMgr, 'HLTConfigSvc'): sl += [svcMgr.HLTConfigSvc]
if "alias" in connectionParameters:
for svc in sl:
svc.ConfigSource = 'DBLookUp'
svc.DBServer = connectionParameters["alias"]
svc.DBUser = ""
else:
technology = connectionParameters["techno"]
for svc in sl:
svc.ConfigSource = technology
if technology == 'sqlite':
for svc in sl:
svc.DBServer = connectionParameters["filename"]
svc.DBUser = "******"
if technology == 'oracle':
for svc in sl:
svc.DBServer = connectionParameters["server"]
svc.DBAccount = connectionParameters["schema"]
svc.DBUser = connectionParameters["user"]
svc.DBPass = connectionParameters["passwd"]
if hasattr(svcMgr, 'L1TopoConfigSvc'):
svcMgr.L1TopoConfigSvc.DBSMKey = TriggerFlags.triggerDbKeys()[0]
svcMgr.L1TopoConfigSvc.UseFrontier = TriggerFlags.triggerUseFrontier(
)
if hasattr(svcMgr, 'LVL1ConfigSvc'):
svcMgr.LVL1ConfigSvc.DBSMKey = TriggerFlags.triggerDbKeys()[0]
svcMgr.LVL1ConfigSvc.DBLVL1PSKey = TriggerFlags.triggerDbKeys()[1]
svcMgr.LVL1ConfigSvc.DBBGSKey = TriggerFlags.triggerDbKeys()[3]
svcMgr.LVL1ConfigSvc.UseFrontier = TriggerFlags.triggerUseFrontier(
)
if hasattr(svcMgr, 'HLTConfigSvc'):
svcMgr.HLTConfigSvc.DBSMKey = TriggerFlags.triggerDbKeys()[0]
svcMgr.HLTConfigSvc.DBHLTPSKey = TriggerFlags.triggerDbKeys()[2]
svcMgr.HLTConfigSvc.UseFrontier = TriggerFlags.triggerUseFrontier()
def configure(self):
log = logging.getLogger("TriggerConfigGetter.py")
# first check the input
if "HIT2RDO" in self._environment:
TriggerFlags.doLVL2 = False
TriggerFlags.doEF = False
log.info("For simulation jobs the following flags are set:")
log.info("globalflags.InputFormat : %s" %
globalflags.InputFormat())
log.info("globalflags.DataSource : %s" %
globalflags.DataSource())
log.info("TriggerFlags.configForStartup : %s" %
TriggerFlags.configForStartup())
log.info("TriggerFlags.dataTakingConditions : %s" %
TriggerFlags.dataTakingConditions())
log.info("TriggerFlags.doLVL2 : %s" %
TriggerFlags.doLVL2())
log.info("TriggerFlags.doEF : %s" %
TriggerFlags.doEF())
else:
if not self.checkInput():
log.error(
"Could not determine job input. Can't setup trigger configuration and will return!"
)
return
self.readPool = globalflags.InputFormat() == 'pool'
self.readRDO = rec.readRDO()
self.writeESDAOD = rec.doWriteESD() or rec.doWriteAOD(
) or rec.doWriteDPD()
self.ConfigSrcList = TriggerFlags.configurationSourceList()
self.readMC = globalflags.DataSource(
) == 'geant3' or globalflags.DataSource() == 'geant4'
self.readTriggerDB = TriggerFlags.readMenuFromTriggerDb(
) and self.readRDO
self.isCommisioning = globalflags.DataSource(
) == 'data' and globalflags.DetGeo() == 'commis'
self.l1Folders = TriggerFlags.dataTakingConditions(
) == 'FullTrigger' or TriggerFlags.dataTakingConditions() == 'Lvl1Only'
self.hltFolders = TriggerFlags.dataTakingConditions(
) == 'FullTrigger' or TriggerFlags.dataTakingConditions() == 'HltOnly'
self.isRun1Data = False
if globalflags.DataSource() == 'data':
from RecExConfig.AutoConfiguration import GetRunNumber
runNumber = GetRunNumber()
if runNumber > 0 and runNumber < 230000:
self.isRun1Data = True
self.isTriggerReprocessing = False
# the TriggerFlags.readMenuFromTriggerDb() tells us that we read the trigger menu from the database
# the connection itself is defined in TriggerFlags.triggerDbConnection()
# reading from the TriggerDB can mean different things:
# a) TriggerFlags doLVL2() and doEF() are both False:
# - create a tmp sqlite file with the conditions (menu)
# - use DSConfigSvc
# b) TriggerFlags doLVL2() or doEF() is True:
# - use HLTConfigSvc
if self.readTriggerDB and (TriggerFlags.doLVL2()
or TriggerFlags.doEF()
or TriggerFlags.doHLT()):
self.ConfigSrcList = [
'xml'
] # to use L1/HLTConfigSvc and not DSConfigSvc, but only if we are running the HLT
if self._environment: # I don't think anyone calls TriggerConfigGetter with an argument
self.readPool = False
self.writeESDAOD = False
self.readHits = False
if "ReadPoolRDO" in self._environment:
self.readPool = True
self.readRDO = True
elif "ReadPool" in self._environment:
self.readPool = True
self.readRDO = False
if "WritePool" in self._environment:
self.writeESDAOD = True
if "HIT2RDO" in self._environment:
self.readRDO = False
self.readHits = True
# define ConfigSvc
if not self.ConfigSrcList:
if (self.readPool and not self.readRDO) or (
self.readRDO
and not self.readPool): # (ESD, AOD, DPD) or (RDO-BS)
self.ConfigSrcList = ['ds']
elif (self.readRDO and self.readPool
) or rec.readTAG() or self.readHits: # (RDO-MC) or TAG
self.ConfigSrcList = ['xml']
else: # should not get here: should be found by checkInput
log.fatal('no reading of BS, RDO, AOD, ESD, or TAG specified')
# we need the temporary COOL database, if we read the configuration from XML and write ESD/AOD (or have 'ds' set for some reason)
self.makeTempCool = self.readRDO and \
( self.writeESDAOD or 'ds' in self.ConfigSrcList ) and \
( self.readMC \
or (self.isCommisioning and (TriggerFlags.readLVL1configFromXML() and TriggerFlags.readHLTconfigFromXML())) \
or TriggerFlags.readMenuFromTriggerDb() )
log.info("Need to create temporary cool file? : %r" %
self.makeTempCool)
log.info('Creating the Trigger Configuration Services')
self.svc = SetupTrigConfigSvc()
#set the merged system
#self.svc.doMergedHLT = TriggerFlags.doHLT()
if 'xml' in self.ConfigSrcList or self.makeTempCool:
# sets them if plain XML reading is to be used
self.svc.l1topoXmlFile = TriggerFlags.outputL1TopoConfigFile(
) # generated in python
self.svc.l1XmlFile = TriggerFlags.outputLVL1configFile(
) # generated in python
self.svc.hltXmlFile = TriggerFlags.outputHLTconfigFile(
) # generated in python
if TriggerFlags.readL1TopoConfigFromXML():
self.svc.l1topoXmlFile = TriggerFlags.inputL1TopoConfigFile(
) # given XML
if TriggerFlags.readLVL1configFromXML():
self.svc.l1XmlFile = TriggerFlags.inputLVL1configFile(
) # given XML
if TriggerFlags.readHLTconfigFromXML():
self.svc.hltXmlFile = TriggerFlags.inputHLTconfigFile(
) # given XML
### preparations are done!
try:
self.svc.SetStates(self.ConfigSrcList)
except:
log.error('Failed to set state of TrigConfigSvc to %r' %
self.ConfigSrcList)
else:
log.info('The following configuration services will be tried: %r' %
self.ConfigSrcList)
try:
self.svc.InitialiseSvc()
except Exception, ex:
log.error('Failed to activate TrigConfigSvc: %r' % ex)
if self.readTriggerDB:
log.info("Using TriggerDB connection '%s'" %
TriggerFlags.triggerDbConnection())
self.trigDbConnectionParameters = interpretConnection(
TriggerFlags.triggerDbConnection(), resolveAlias=False)
self.setConfigSvcConnParams(self.trigDbConnectionParameters)
log.info("TriggerFlags.triggerCoolDbConnection is '%s' [default: '']" %
TriggerFlags.triggerCoolDbConnection())
TrigCoolDbConnection = TriggerFlags.triggerCoolDbConnection()
if self.makeTempCool:
TrigCoolDbConnection = self.setupTempCOOLWriting(
TrigCoolDbConnection)
if 'ds' in self.ConfigSrcList or self.writeESDAOD:
self.setupCOOLReading(TrigCoolDbConnection)
if hasattr(svcMgr, 'DSConfigSvc'):
db = 'TRIGGERDB'
if self.isRun1Data:
db = 'TRIGGERDB_RUN1'
elif self.readMC:
db = 'TRIGGERDBMC'
elif self.isTriggerReprocessing:
db = 'TRIGGERDBREPR'
svcMgr.DSConfigSvc.ConfigSource = 'dblookup'
svcMgr.DSConfigSvc.DBServer = db
log.info("DSConfigSvc trigger database is '%s'" % db)
if self.writeESDAOD:
self.setupCOOLWriting()
self.setupxAODWriting()
# all went fine we are configured
return True
def configure(self):
log = logging.getLogger("TriggerConfigGetter.py")
# first check the input
if "HIT2RDO" in self._environment:
TriggerFlags.doLVL2 = False
TriggerFlags.doEF = False
log.info("For simulation jobs the following flags are set:")
log.info("globalflags.InputFormat : %s" %
globalflags.InputFormat())
log.info("globalflags.DataSource : %s" %
globalflags.DataSource())
log.info("TriggerFlags.configForStartup : %s" %
TriggerFlags.configForStartup())
log.info("TriggerFlags.dataTakingConditions : %s" %
TriggerFlags.dataTakingConditions())
log.info("TriggerFlags.doLVL2 : %s" %
TriggerFlags.doLVL2())
log.info("TriggerFlags.doEF : %s" %
TriggerFlags.doEF())
else:
if not self.checkInput():
log.error(
"Could not determine job input. Can't setup trigger configuration and will return!"
)
return
self.readPool = globalflags.InputFormat() == 'pool'
self.readRDO = rec.readRDO()
self.writeESDAOD = rec.doWriteESD() or rec.doWriteAOD(
) or rec.doWriteDPD()
self.ConfigSrcList = TriggerFlags.configurationSourceList()
self.readMC = globalflags.DataSource(
) == 'geant3' or globalflags.DataSource() == 'geant4'
self.readTriggerDB = TriggerFlags.readMenuFromTriggerDb(
) and self.readRDO
self.isCommisioning = globalflags.DataSource(
) == 'data' and globalflags.DetGeo() == 'commis'
self.l1Folders = TriggerFlags.dataTakingConditions(
) == 'FullTrigger' or TriggerFlags.dataTakingConditions() == 'Lvl1Only'
self.hltFolders = TriggerFlags.dataTakingConditions(
) == 'FullTrigger' or TriggerFlags.dataTakingConditions() == 'HltOnly'
self.isRun1Data = False
if globalflags.DataSource() == 'data':
from RecExConfig.AutoConfiguration import GetRunNumber
runNumber = GetRunNumber()
if runNumber > 0 and runNumber < 230000:
self.isRun1Data = True
self.isTriggerReprocessing = False
# the TriggerFlags.readMenuFromTriggerDb() tells us that we read the trigger menu from the database
# the connection itself is defined in TriggerFlags.triggerDbConnection()
# reading from the TriggerDB can mean different things:
# a) TriggerFlags doLVL2() and doEF() are both False:
# - create a tmp sqlite file with the conditions (menu)
# - use DSConfigSvc
# b) TriggerFlags doLVL2() or doEF() is True:
# - use HLTConfigSvc
if self.readTriggerDB and (TriggerFlags.doLVL2()
or TriggerFlags.doEF()
or TriggerFlags.doHLT()):
self.ConfigSrcList = [
'xml'
] # to use L1/HLTConfigSvc and not DSConfigSvc, but only if we are running the HLT
if self._environment: # I don't think anyone calls TriggerConfigGetter with an argument
self.readPool = False
self.writeESDAOD = False
self.readHits = False
if "ReadPoolRDO" in self._environment:
self.readPool = True
self.readRDO = True
elif "ReadPool" in self._environment:
self.readPool = True
self.readRDO = False
if "WritePool" in self._environment:
self.writeESDAOD = True
if "HIT2RDO" in self._environment:
self.readRDO = False
self.readHits = True
# define ConfigSvc
if not self.ConfigSrcList:
if (self.readPool and not self.readRDO) or (
self.readRDO
and not self.readPool): # (ESD, AOD, DPD) or (RDO-BS)
self.ConfigSrcList = ['ds']
elif (self.readRDO and self.readPool
) or rec.readTAG() or self.readHits: # (RDO-MC) or TAG
self.ConfigSrcList = ['xml']
else: # should not get here: should be found by checkInput
log.fatal('no reading of BS, RDO, AOD, ESD, or TAG specified')
# we need the temporary COOL database, if we read the configuration from XML and write ESD/AOD (or have 'ds' set for some reason)
self.makeTempCool = self.readRDO and \
( self.writeESDAOD or 'ds' in self.ConfigSrcList ) and \
( self.readMC \
or (self.isCommisioning and (TriggerFlags.readLVL1configFromXML() and TriggerFlags.readHLTconfigFromXML())) \
or TriggerFlags.readMenuFromTriggerDb() )
log.info("Need to create temporary cool file? : %r" %
self.makeTempCool)
log.info('Creating the Trigger Configuration Services')
self.svc = SetupTrigConfigSvc()
#set the merged system
#self.svc.doMergedHLT = TriggerFlags.doHLT()
if 'xml' in self.ConfigSrcList or self.makeTempCool:
# sets them if plain XML reading is to be used
self.svc.l1topoXmlFile = TriggerFlags.outputL1TopoConfigFile(
) # generated in python
self.svc.l1XmlFile = TriggerFlags.outputLVL1configFile(
) # generated in python
self.svc.hltXmlFile = TriggerFlags.outputHLTconfigFile(
) # generated in python
if TriggerFlags.readL1TopoConfigFromXML():
self.svc.l1topoXmlFile = TriggerFlags.inputL1TopoConfigFile(
) # given XML
if TriggerFlags.readLVL1configFromXML():
self.svc.l1XmlFile = TriggerFlags.inputLVL1configFile(
) # given XML
if TriggerFlags.readHLTconfigFromXML():
self.svc.hltXmlFile = TriggerFlags.inputHLTconfigFile(
) # given XML
### preparations are done!
try:
self.svc.SetStates(self.ConfigSrcList)
except:
log.error('Failed to set state of TrigConfigSvc to %r' %
self.ConfigSrcList)
else:
log.info('The following configuration services will be tried: %r' %
self.ConfigSrcList)
try:
self.svc.InitialiseSvc()
except Exception, ex:
log.error('Failed to activate TrigConfigSvc: %r' % ex)
class TriggerConfigGetter(Configured):
""" This class brings to the job Trigger Configuration.
"""
_environment=""
def __init__(self, environment=""):
log = logging.getLogger( "TriggerConfigGetter.py" )
if environment:
log.info('Initialize (environment "%s")', environment)
else:
log.info('Initialize (interpreting rec and trigger flags)')
self._environment = environment
super(TriggerConfigGetter,self).__init__() # calls configure
def checkFileMetaData(self):
log = logging.getLogger( "TriggerConfigGetter.py" )
from PyUtils.MetaReaderPeekerFull import metadata
self.hasLBwiseHLTPrescalesAndL1ItemDef = True
# protection against early runs
if 'runNumbers' in metadata and self._environment == "" and globalflags.DataSource() == 'data' and rec.readRDO() and any([run < 134230 for run in metadata['runNumbers']]):
self.hasLBwiseHLTPrescalesAndL1ItemDef = False
if self.hasLBwiseHLTPrescalesAndL1ItemDef:
log.info("Using LB-wise HLT prescales")
else:
log.info("Using run-wise HLT prescales")
def checkInput(self):
self.checkFileMetaData()
log = logging.getLogger( "TriggerConfigGetter.py" )
if "ReadPool" in self._environment or "WritePool" in self._environment:
log.info("Flags are ignored, since 'ReadPool' or 'WritePool' is specified")
return True
if rec.readESD() or rec.readAOD(): # and globalflags.DataSource()=='data': # need this for MC as well
protectedInclude("TriggerJobOpts/TriggerConfigCheckMetadata.py")
if rec.readRDO() and globalflags.InputFormat()=='bytestream' and globalflags.DataSource()=='data' and TriggerFlags.configForStartup()!='HLToffline':
protectedInclude("TriggerJobOpts/TriggerConfigCheckHLTpsk.py")
log.info("The following flags are set:")
log.info("globalflags.InputFormat : %s", globalflags.InputFormat())
log.info("rec.read.* : RDO: %s, ESD: %s, AOD: %s, TAG: %s", rec.readRDO(), rec.readESD(), rec.readAOD(), rec.readTAG())
log.info("rec.doWrite.* : ESD: %s, AOD: %s, TAG: %s", rec.doWriteESD(), rec.doWriteAOD(), rec.doWriteTAG())
log.info("globalflags.DataSource : %s", globalflags.DataSource())
log.info("TriggerFlags.configForStartup : %s", TriggerFlags.configForStartup())
log.info("TriggerFlags.dataTakingConditions : %s", TriggerFlags.dataTakingConditions())
log.info("TriggerFlags.configurationSourceList: %s", TriggerFlags.configurationSourceList())
count = len([1 for x in [rec.readRDO(),rec.readESD(),rec.readAOD()] if x ]) #readTAG is only set with another input
if count == 0:
log.warning("Don't know what the input format is.")
return False
if count >= 2:
log.warning("More than one input format specified, please set only the appropriate one.")
return False
return True
def setConfigSvcConnParams(self,connectionParameters):
sl = []
if hasattr(svcMgr,'L1TopoConfigSvc'):
sl += [svcMgr.L1TopoConfigSvc]
if hasattr(svcMgr,'LVL1ConfigSvc'):
sl += [svcMgr.LVL1ConfigSvc]
if hasattr(svcMgr,'HLTConfigSvc'):
sl += [svcMgr.HLTConfigSvc]
if "alias" in connectionParameters:
for svc in sl:
svc.ConfigSource = 'DBLookUp'
svc.DBServer = connectionParameters["alias"]
svc.DBUser = ""
else:
technology = connectionParameters["techno"]
for svc in sl:
svc.ConfigSource = technology
if technology == 'sqlite':
for svc in sl:
svc.DBServer = connectionParameters["filename"]
svc.DBUser = "******"
if technology == 'oracle':
for svc in sl:
svc.DBServer = connectionParameters["server"]
svc.DBAccount = connectionParameters["schema"]
svc.DBUser = connectionParameters["user" ]
svc.DBPass = connectionParameters["passwd"]
if hasattr(svcMgr,'L1TopoConfigSvc'):
svcMgr.L1TopoConfigSvc.DBSMKey = TriggerFlags.triggerDbKeys()[0]
svcMgr.L1TopoConfigSvc.UseFrontier = TriggerFlags.triggerUseFrontier()
if hasattr(svcMgr,'LVL1ConfigSvc'):
svcMgr.LVL1ConfigSvc.DBSMKey = TriggerFlags.triggerDbKeys()[0]
svcMgr.LVL1ConfigSvc.DBLVL1PSKey = TriggerFlags.triggerDbKeys()[1]
svcMgr.LVL1ConfigSvc.DBBGSKey = TriggerFlags.triggerDbKeys()[3]
svcMgr.LVL1ConfigSvc.UseFrontier = TriggerFlags.triggerUseFrontier()
if hasattr(svcMgr,'HLTConfigSvc'):
svcMgr.HLTConfigSvc.DBSMKey = TriggerFlags.triggerDbKeys()[0]
svcMgr.HLTConfigSvc.DBHLTPSKey = TriggerFlags.triggerDbKeys()[2]
svcMgr.HLTConfigSvc.UseFrontier = TriggerFlags.triggerUseFrontier()
def configure(self):
log = logging.getLogger( "TriggerConfigGetter.py" )
from PyUtils.MetaReaderPeekerFull import metadata
# first check the input
if "HIT2RDO" in self._environment:
TriggerFlags.doLVL2 = False
TriggerFlags.doEF = False
log.info("For simulation jobs the following flags are set:")
log.info("globalflags.InputFormat : %s", globalflags.InputFormat())
log.info("globalflags.DataSource : %s", globalflags.DataSource())
log.info("TriggerFlags.configForStartup : %s", TriggerFlags.configForStartup())
log.info("TriggerFlags.dataTakingConditions : %s", TriggerFlags.dataTakingConditions())
log.info("TriggerFlags.doLVL2 : %s", TriggerFlags.doLVL2())
log.info("TriggerFlags.doEF : %s", TriggerFlags.doEF())
else:
if not self.checkInput():
log.error("Could not determine job input. Can't setup trigger configuration and will return!")
return
# self.checkInput() may call TriggerConfigCheckMetadata, this can in turn set "rec.doTrigger.set_Value_and_Lock(False)"
# but TriggerConfigGetter might have only been called in the first place due to this flag having been true,
# so re-check that we're still OK to be executing here
if not (recAlgs.doTrigger() or rec.doTrigger() or TriggerFlags.doTriggerConfigOnly()):
log.info("Aborting TriggerConfigGetter as the trigger flags were switched to false in checkInput()")
return True
self.readPool = globalflags.InputFormat() == 'pool'
self.readRDO = rec.readRDO()
self.writeESDAOD = rec.doWriteESD() or rec.doWriteAOD() or rec.doWriteDPD()
self.writeAOD = rec.doWriteAOD() or rec.doWriteDPD()
self.ConfigSrcList = TriggerFlags.configurationSourceList()
self.readMC = globalflags.DataSource()=='geant3' or globalflags.DataSource()=='geant4'
self.readTriggerDB = TriggerFlags.readMenuFromTriggerDb() and self.readRDO
self.isCommisioning = globalflags.DataSource()=='data' and globalflags.DetGeo()=='commis'
self.l1Folders = TriggerFlags.dataTakingConditions()=='FullTrigger' or TriggerFlags.dataTakingConditions()=='Lvl1Only'
self.hltFolders = TriggerFlags.dataTakingConditions()=='FullTrigger' or TriggerFlags.dataTakingConditions()=='HltOnly'
self.isRun1Data = False
self.hasxAODMeta = ("metadata_items" in metadata and any(('TriggerMenu' in key) for key in metadata["metadata_items"].keys()))
if globalflags.DataSource()=='data':
from RecExConfig.AutoConfiguration import GetRunNumber
runNumber = GetRunNumber()
if runNumber is not None and runNumber > 0 and runNumber < 230000 :
self.isRun1Data = True
self.isTriggerReprocessing = False
# the TriggerFlags.readMenuFromTriggerDb() tells us that we read the trigger menu from the database
# the connection itself is defined in TriggerFlags.triggerDbConnection()
# reading from the TriggerDB can mean different things:
# a) TriggerFlags doLVL2() and doEF() are both False:
# - create a tmp sqlite file with the conditions (menu)
# - use DSConfigSvc
# b) TriggerFlags doLVL2() or doEF() is True:
# - use HLTConfigSvc
if self.readTriggerDB and (TriggerFlags.doLVL2() or TriggerFlags.doEF() or TriggerFlags.doHLT()):
self.ConfigSrcList = ['xml'] # to use L1/HLTConfigSvc and not DSConfigSvc, but only if we are running the HLT
if self._environment: # I don't think anyone calls TriggerConfigGetter with an argument
self.readPool = False
self.writeESDAOD = False
self.readHits = False
if "ReadPoolRDO" in self._environment:
self.readPool = True
self.readRDO = True
elif "ReadPool" in self._environment:
self.readPool = True
self.readRDO = False
if "WritePool" in self._environment:
self.writeESDAOD = True
if "HIT2RDO" in self._environment:
self.readRDO = False
self.readHits = True
# define ConfigSvc
if not self.ConfigSrcList:
if (self.readPool and not self.readRDO) or (self.readRDO and not self.readPool): # (ESD, AOD, DPD) or (RDO-BS)
self.ConfigSrcList = ['ds']
elif (self.readRDO and self.readPool) or rec.readTAG() or self.readHits: # (RDO-MC) or TAG
self.ConfigSrcList = ['xml']
else: # should not get here: should be found by checkInput
log.fatal('no reading of BS, RDO, AOD, ESD, or TAG specified')
# we need the temporary COOL database, if we read the configuration from XML and write ESD/AOD (or have 'ds' set for some reason)
self.makeTempCool = self.readRDO and \
( self.writeESDAOD or 'ds' in self.ConfigSrcList ) and \
( self.readMC \
or (self.isCommisioning and (TriggerFlags.readLVL1configFromXML() and TriggerFlags.readHLTconfigFromXML())) \
or TriggerFlags.readMenuFromTriggerDb() )
log.info("Need to create temporary cool file? : %r", self.makeTempCool)
log.info('Creating the Trigger Configuration Services')
from AthenaCommon.AppMgr import ServiceMgr as svcMgr
########################################################################
# START OF TEMPORARY SOLUTION FOR RUN-3 TRIGGER DEVELOPMENT
########################################################################
from TriggerJobOpts.HLTTriggerResultGetter import EDMDecodingVersion
EDMDecodingVersion() # In most use cases this needs to be called much earlier than in HLTTriggerResultGetter
if TriggerFlags.EDMDecodingVersion() >= 3:
if self.hasxAODMeta:
if not hasattr(svcMgr, 'xAODConfigSvc'):
from TrigConfxAOD.TrigConfxAODConf import TrigConf__xAODConfigSvc
svcMgr += TrigConf__xAODConfigSvc('xAODConfigSvc')
else: # Does not have xAODMeta
# Run-3 Trigger Configuration Services
from TrigConfigSvc.TrigConfigSvcCfg import getL1ConfigSvc, getHLTConfigSvc
from AthenaConfiguration.AllConfigFlags import ConfigFlags
svcMgr += getL1ConfigSvc(ConfigFlags)
svcMgr += getHLTConfigSvc(ConfigFlags)
# Needed for TrigConf::xAODMenuWriterMT
from TrigConfigSvc.TrigConfigSvcConfig import TrigConfigSvc
svcMgr += TrigConfigSvc("TrigConfigSvc")
svcMgr.TrigConfigSvc.PriorityList = ["none", "ds", "xml"]
else:
# non-MT (Run-2) Trigger Configuration
self.svc = SetupTrigConfigSvc()
if 'xml' in self.ConfigSrcList or self.makeTempCool:
# sets them if plain XML reading is to be used
self.svc.l1topoXmlFile = TriggerFlags.outputL1TopoConfigFile() # generated in python
self.svc.l1XmlFile = TriggerFlags.outputLVL1configFile() # generated in python
self.svc.hltXmlFile = TriggerFlags.outputHLTconfigFile() # generated in python
if TriggerFlags.readL1TopoConfigFromXML():
self.svc.l1topoXmlFile = TriggerFlags.inputL1TopoConfigFile() # given XML
if TriggerFlags.readLVL1configFromXML():
self.svc.l1XmlFile = TriggerFlags.inputLVL1configFile() # given XML
if TriggerFlags.readHLTconfigFromXML():
self.svc.hltXmlFile = TriggerFlags.inputHLTconfigFile() # given XML
try:
self.svc.SetStates( self.ConfigSrcList )
except Exception:
log.error( 'Failed to set state of TrigConfigSvc to %r', self.ConfigSrcList )
else:
log.info('The following configuration services will be tried: %r', self.ConfigSrcList )
try:
self.svc.InitialiseSvc()
except Exception as ex:
log.error( 'Failed to activate TrigConfigSvc: %r', ex )
########################################################################
# END OF TEMPORARY SOLUTION FOR RUN-3 TRIGGER DEVELOPMENT
########################################################################
if self.readTriggerDB:
log.info( "Using TriggerDB connection '%s'", TriggerFlags.triggerDbConnection() )
self.trigDbConnectionParameters = interpretConnection(TriggerFlags.triggerDbConnection(), resolveAlias=False)
self.setConfigSvcConnParams(self.trigDbConnectionParameters)
log.info("TriggerFlags.triggerCoolDbConnection is '%s' [default: '']", TriggerFlags.triggerCoolDbConnection())
TrigCoolDbConnection = TriggerFlags.triggerCoolDbConnection()
if self.makeTempCool:
TrigCoolDbConnection = self.setupTempCOOLWriting(TrigCoolDbConnection)
if ('ds' in self.ConfigSrcList) and not self.hasxAODMeta:
self.setupCOOLReading(TrigCoolDbConnection)
if hasattr(svcMgr, 'DSConfigSvc'):
db = 'TRIGGERDB'
if self.isRun1Data:
db = 'TRIGGERDB_RUN1'
elif self.readMC:
db = 'TRIGGERDBMC'
elif self.isTriggerReprocessing:
db = 'TRIGGERDBREPR'
svcMgr.DSConfigSvc.ConfigSource = 'dblookup'
svcMgr.DSConfigSvc.DBServer = db
log.info("DSConfigSvc trigger database is '%s'", db)
if not self.hasxAODMeta:
self.setupxAODWriting()
# all went fine we are configured
return True
def setupTempCOOLWriting(self,TrigCoolDbConnection):
log = logging.getLogger( "TriggerConfigGetter.py" )
log.info( 'Trigger the copying of COOL data into DetectorStore. I am not certain this is needed any longer JS.')
# if we have MC data (nothing in ORACLE/COOL) we need to write an SQlite file
# and change the dbConnection
if ( self.readMC \
or (self.isCommisioning and (TriggerFlags.readLVL1configFromXML and TriggerFlags.readHLTconfigFromXML)) \
or TriggerFlags.readMenuFromTriggerDb ):
log.info( 'TempCoolSetup: Setting up the writing of a temporary COOL DB')
from TrigConfigSvc.TrigConf2COOL import theConfCOOLWriter
if self.readTriggerDB:
log.info("TempCoolSetup: source is db [%s] with keys %s/%s/%s", TriggerFlags.triggerDbConnection(),TriggerFlags.triggerDbKeys()[0],TriggerFlags.triggerDbKeys()[1],TriggerFlags.triggerDbKeys()[2])
theConfCOOLWriter.smk = TriggerFlags.triggerDbKeys()[0]
theConfCOOLWriter.l1psk = TriggerFlags.triggerDbKeys()[1]
theConfCOOLWriter.hltpsk = TriggerFlags.triggerDbKeys()[2]
theConfCOOLWriter.setTriggerDBConnection(self.trigDbConnectionParameters)
else:
log.info("TempCoolSetup: sources are '%s' and '%s'", self.svc.l1XmlFile,self.svc.hltXmlFile)
theConfCOOLWriter.lvl1menu = self.svc.l1XmlFile
theConfCOOLWriter.hltmenu = self.svc.hltXmlFile
if TrigCoolDbConnection == "": # nothing specified by the user
TrigCoolDbConnection = re.match(".*;schema=(.*);dbname=.*",theConfCOOLWriter.dbConnection).group(1)
theConfCOOLWriter.isWritingNeeded = True
log.info("TempCoolSetup: Setting TrigCoolDbConnection to %s", TrigCoolDbConnection )
log.info("TempCoolSetup: Enabling writing and IOV adjustment")
return TrigCoolDbConnection
def setupCOOLReading(self,TrigCoolDbConnection):
log = logging.getLogger( "TriggerConfigGetter.py" )
log.info( 'DSConfigSvc enabled, will setup IOVDbSvc to access configuration meta data')
#usePresetConnection = (TrigCoolDbConnection != "")
## if we process MC from an XML file the dbConnection needs to
## be set to a local SQlite file
# when reading from the COOL database (either form
# ORACLE/SQlite) we need an algorithm that triggers the
# copying
#
# In addition for MC the IOV has to be adjusted since in COOL the config data is written with IOV=infinity
if TrigCoolDbConnection=='':
log.info("COOL DBConnection: not set, will use default conditions database" )
TrigCoolDbConnection = 'TRIGGER'
addNewFolders = TriggerFlags.configForStartup()=="HLTonline" and self.readRDO
else: # for sqlite COOL: temp (usually /tmp/hltMenu.xxx.db) or predefined (e.g. trigconf.db)
log.info("COOL DBConnection: " + TrigCoolDbConnection )
addNewFolders = ( ( TriggerFlags.configForStartup()=="HLToffline"
or TriggerFlags.configForStartup()=="HLTonline"
or globalflags.DataSource()!='data')
and self.readRDO ) # bytestream or MC RDO
# add folders for reading
from IOVDbSvc.CondDB import conddb
folders = []
if self.hltFolders:
folders += [ "HLT/Menu", "HLT/HltConfigKeys" ]
if self.l1Folders:
folders += [ "LVL1/Lvl1ConfigKey", "LVL1/Menu", "LVL1/Prescales" ]
if globalflags.DataSource() == 'data':
if self.l1Folders:
folders += [ "LVL1/BunchGroupKey", "LVL1/BunchGroupDescription", "LVL1/BunchGroupContent" ]
if self.hasLBwiseHLTPrescalesAndL1ItemDef:
if self.hltFolders:
folders += [ "HLT/Prescales", "HLT/PrescaleKey" ]
if self.l1Folders:
folders += [ "LVL1/ItemDef" ]
log.info("Adding folders to IOVDbSvc")
if addNewFolders:
# Need thresholds folders but only for Tier0 BS->ESD
log.info("Also adding new folders to IOVDbSvc")
if self.hltFolders:
folders += [ "HLT/Groups" ]
if self.l1Folders:
folders += [ "LVL1/Thresholds" ]
for f in folders:
log.info(" /TRIGGER/%s", f)
conddb.addFolderWithTag(TrigCoolDbConnection, "/TRIGGER/%s" % f, "HEAD")
def setupxAODWriting( self ):
"""
Method setting up the writing of the ROOT-readable trigger configuration
metadata.
"""
# Get a logger:
log = logging.getLogger( "TriggerConfigGetter.py" )
log.info( "ESD/AOD writing enabled, will set up xAOD trigger "
"configuration metadata writing" )
# Get the algorithm sequence:
from AthenaCommon.AlgSequence import AlgSequence
from .TriggerFlags import TriggerFlags
topAlgs = AlgSequence()
# Add the algorithm creating the trigger configuration metadata for
# the output:
try:
if TriggerFlags.EDMDecodingVersion() <= 2:
from TrigConfxAOD.TrigConfxAODConf import TrigConf__xAODMenuWriter
topAlgs += TrigConf__xAODMenuWriter( OverwriteEventObj = True )
else:
from TrigConfxAOD.TrigConfxAODConf import TrigConf__xAODMenuWriterMT
menuwriter = TrigConf__xAODMenuWriterMT()
menuwriter.IsHLTJSONConfig = True
menuwriter.IsL1JSONConfig = True
topAlgs += menuwriter
# The metadata objects to add to the output:
metadataItems = [ "xAOD::TriggerMenuContainer#TriggerMenu",
"xAOD::TriggerMenuAuxContainer#TriggerMenuAux." ]
# Set up the metadata for the output ESD and AOD:
from RecExConfig.ObjKeyStore import objKeyStore
objKeyStore.addManyTypesMetaData( metadataItems )
except ImportError: # don't want to branch in rel 18
pass
# Return gracefully:
return
def configure(self):
log = logging.getLogger( "TriggerConfigGetter.py" )
from PyUtils.MetaReaderPeekerFull import metadata
# first check the input
if "HIT2RDO" in self._environment:
TriggerFlags.doLVL2 = False
TriggerFlags.doEF = False
log.info("For simulation jobs the following flags are set:")
log.info("globalflags.InputFormat : %s", globalflags.InputFormat())
log.info("globalflags.DataSource : %s", globalflags.DataSource())
log.info("TriggerFlags.configForStartup : %s", TriggerFlags.configForStartup())
log.info("TriggerFlags.dataTakingConditions : %s", TriggerFlags.dataTakingConditions())
log.info("TriggerFlags.doLVL2 : %s", TriggerFlags.doLVL2())
log.info("TriggerFlags.doEF : %s", TriggerFlags.doEF())
else:
if not self.checkInput():
log.error("Could not determine job input. Can't setup trigger configuration and will return!")
return
# self.checkInput() may call TriggerConfigCheckMetadata, this can in turn set "rec.doTrigger.set_Value_and_Lock(False)"
# but TriggerConfigGetter might have only been called in the first place due to this flag having been true,
# so re-check that we're still OK to be executing here
if not (recAlgs.doTrigger() or rec.doTrigger() or TriggerFlags.doTriggerConfigOnly()):
log.info("Aborting TriggerConfigGetter as the trigger flags were switched to false in checkInput()")
return True
self.readPool = globalflags.InputFormat() == 'pool'
self.readRDO = rec.readRDO()
self.writeESDAOD = rec.doWriteESD() or rec.doWriteAOD() or rec.doWriteDPD()
self.writeAOD = rec.doWriteAOD() or rec.doWriteDPD()
self.ConfigSrcList = TriggerFlags.configurationSourceList()
self.readMC = globalflags.DataSource()=='geant3' or globalflags.DataSource()=='geant4'
self.readTriggerDB = TriggerFlags.readMenuFromTriggerDb() and self.readRDO
self.isCommisioning = globalflags.DataSource()=='data' and globalflags.DetGeo()=='commis'
self.l1Folders = TriggerFlags.dataTakingConditions()=='FullTrigger' or TriggerFlags.dataTakingConditions()=='Lvl1Only'
self.hltFolders = TriggerFlags.dataTakingConditions()=='FullTrigger' or TriggerFlags.dataTakingConditions()=='HltOnly'
self.isRun1Data = False
self.hasxAODMeta = ("metadata_items" in metadata and any(('TriggerMenu' in key) for key in metadata["metadata_items"].keys()))
if globalflags.DataSource()=='data':
from RecExConfig.AutoConfiguration import GetRunNumber
runNumber = GetRunNumber()
if runNumber is not None and runNumber > 0 and runNumber < 230000 :
self.isRun1Data = True
self.isTriggerReprocessing = False
# the TriggerFlags.readMenuFromTriggerDb() tells us that we read the trigger menu from the database
# the connection itself is defined in TriggerFlags.triggerDbConnection()
# reading from the TriggerDB can mean different things:
# a) TriggerFlags doLVL2() and doEF() are both False:
# - create a tmp sqlite file with the conditions (menu)
# - use DSConfigSvc
# b) TriggerFlags doLVL2() or doEF() is True:
# - use HLTConfigSvc
if self.readTriggerDB and (TriggerFlags.doLVL2() or TriggerFlags.doEF() or TriggerFlags.doHLT()):
self.ConfigSrcList = ['xml'] # to use L1/HLTConfigSvc and not DSConfigSvc, but only if we are running the HLT
if self._environment: # I don't think anyone calls TriggerConfigGetter with an argument
self.readPool = False
self.writeESDAOD = False
self.readHits = False
if "ReadPoolRDO" in self._environment:
self.readPool = True
self.readRDO = True
elif "ReadPool" in self._environment:
self.readPool = True
self.readRDO = False
if "WritePool" in self._environment:
self.writeESDAOD = True
if "HIT2RDO" in self._environment:
self.readRDO = False
self.readHits = True
# define ConfigSvc
if not self.ConfigSrcList:
if (self.readPool and not self.readRDO) or (self.readRDO and not self.readPool): # (ESD, AOD, DPD) or (RDO-BS)
self.ConfigSrcList = ['ds']
elif (self.readRDO and self.readPool) or rec.readTAG() or self.readHits: # (RDO-MC) or TAG
self.ConfigSrcList = ['xml']
else: # should not get here: should be found by checkInput
log.fatal('no reading of BS, RDO, AOD, ESD, or TAG specified')
# we need the temporary COOL database, if we read the configuration from XML and write ESD/AOD (or have 'ds' set for some reason)
self.makeTempCool = self.readRDO and \
( self.writeESDAOD or 'ds' in self.ConfigSrcList ) and \
( self.readMC \
or (self.isCommisioning and (TriggerFlags.readLVL1configFromXML() and TriggerFlags.readHLTconfigFromXML())) \
or TriggerFlags.readMenuFromTriggerDb() )
log.info("Need to create temporary cool file? : %r", self.makeTempCool)
log.info('Creating the Trigger Configuration Services')
from AthenaCommon.AppMgr import ServiceMgr as svcMgr
########################################################################
# START OF TEMPORARY SOLUTION FOR RUN-3 TRIGGER DEVELOPMENT
########################################################################
from TriggerJobOpts.HLTTriggerResultGetter import EDMDecodingVersion
EDMDecodingVersion() # In most use cases this needs to be called much earlier than in HLTTriggerResultGetter
if TriggerFlags.EDMDecodingVersion() >= 3:
if self.hasxAODMeta:
if not hasattr(svcMgr, 'xAODConfigSvc'):
from TrigConfxAOD.TrigConfxAODConf import TrigConf__xAODConfigSvc
svcMgr += TrigConf__xAODConfigSvc('xAODConfigSvc')
else: # Does not have xAODMeta
# Run-3 Trigger Configuration Services
from TrigConfigSvc.TrigConfigSvcCfg import getL1ConfigSvc, getHLTConfigSvc
from AthenaConfiguration.AllConfigFlags import ConfigFlags
svcMgr += getL1ConfigSvc(ConfigFlags)
svcMgr += getHLTConfigSvc(ConfigFlags)
# Needed for TrigConf::xAODMenuWriterMT
from TrigConfigSvc.TrigConfigSvcConfig import TrigConfigSvc
svcMgr += TrigConfigSvc("TrigConfigSvc")
svcMgr.TrigConfigSvc.PriorityList = ["none", "ds", "xml"]
else:
# non-MT (Run-2) Trigger Configuration
self.svc = SetupTrigConfigSvc()
if 'xml' in self.ConfigSrcList or self.makeTempCool:
# sets them if plain XML reading is to be used
self.svc.l1topoXmlFile = TriggerFlags.outputL1TopoConfigFile() # generated in python
self.svc.l1XmlFile = TriggerFlags.outputLVL1configFile() # generated in python
self.svc.hltXmlFile = TriggerFlags.outputHLTconfigFile() # generated in python
if TriggerFlags.readL1TopoConfigFromXML():
self.svc.l1topoXmlFile = TriggerFlags.inputL1TopoConfigFile() # given XML
if TriggerFlags.readLVL1configFromXML():
self.svc.l1XmlFile = TriggerFlags.inputLVL1configFile() # given XML
if TriggerFlags.readHLTconfigFromXML():
self.svc.hltXmlFile = TriggerFlags.inputHLTconfigFile() # given XML
try:
self.svc.SetStates( self.ConfigSrcList )
except Exception:
log.error( 'Failed to set state of TrigConfigSvc to %r', self.ConfigSrcList )
else:
log.info('The following configuration services will be tried: %r', self.ConfigSrcList )
try:
self.svc.InitialiseSvc()
except Exception as ex:
log.error( 'Failed to activate TrigConfigSvc: %r', ex )
########################################################################
# END OF TEMPORARY SOLUTION FOR RUN-3 TRIGGER DEVELOPMENT
########################################################################
if self.readTriggerDB:
log.info( "Using TriggerDB connection '%s'", TriggerFlags.triggerDbConnection() )
self.trigDbConnectionParameters = interpretConnection(TriggerFlags.triggerDbConnection(), resolveAlias=False)
self.setConfigSvcConnParams(self.trigDbConnectionParameters)
log.info("TriggerFlags.triggerCoolDbConnection is '%s' [default: '']", TriggerFlags.triggerCoolDbConnection())
TrigCoolDbConnection = TriggerFlags.triggerCoolDbConnection()
if self.makeTempCool:
TrigCoolDbConnection = self.setupTempCOOLWriting(TrigCoolDbConnection)
if ('ds' in self.ConfigSrcList) and not self.hasxAODMeta:
self.setupCOOLReading(TrigCoolDbConnection)
if hasattr(svcMgr, 'DSConfigSvc'):
db = 'TRIGGERDB'
if self.isRun1Data:
db = 'TRIGGERDB_RUN1'
elif self.readMC:
db = 'TRIGGERDBMC'
elif self.isTriggerReprocessing:
db = 'TRIGGERDBREPR'
svcMgr.DSConfigSvc.ConfigSource = 'dblookup'
svcMgr.DSConfigSvc.DBServer = db
log.info("DSConfigSvc trigger database is '%s'", db)
if not self.hasxAODMeta:
self.setupxAODWriting()
# all went fine we are configured
return True