def test_roundtrip_stack(tmpdir, process_count, loaded_container_registry):
definition = loaded_container_registry.findDefinitionContainers(id = "multiple_settings")[0]
instances = loaded_container_registry.findInstanceContainers(id = "setting_values")[0]
container_stack = ContainerStack("test_stack")
container_stack.setName("Test Container Stack")
container_stack.addMetaDataEntry("test", "test")
container_stack.addContainer(definition)
container_stack.addContainer(instances)
temp_file = tmpdir.join("container_stack_test")
mp_run(process_count, write_data, temp_file, container_stack)
assert len(list(tmpdir.listdir())) == 1
results = mp_run(process_count, read_data, temp_file)
for result in results:
deserialized_stack = ContainerStack("test_stack")
deserialized_stack.deserialize(result)
assert deserialized_stack.getName() == container_stack.getName()
assert deserialized_stack.getMetaData() == container_stack.getMetaData()
assert deserialized_stack.getBottom() == container_stack.getBottom()
assert deserialized_stack.getTop() == container_stack.getTop()
def test_roundtrip_stack(tmpdir, process_count, loaded_container_registry):
definition = loaded_container_registry.findDefinitionContainers(id = "multiple_settings")[0]
instances = loaded_container_registry.findInstanceContainers(id = "setting_values")[0]
container_stack = ContainerStack("test_stack")
container_stack.setName("Test Container Stack")
container_stack.addMetaDataEntry("test", "test")
container_stack.addContainer(definition)
container_stack.addContainer(instances)
temp_file = tmpdir.join("container_stack_test")
mp_run(process_count, write_data, temp_file, container_stack)
assert len(list(tmpdir.listdir())) == 1
results = mp_run(process_count, read_data, temp_file)
for result in results:
deserialized_stack = ContainerStack("test_stack")
deserialized_stack.deserialize(result)
assert deserialized_stack.getName() == container_stack.getName()
assert deserialized_stack.getMetaData() == container_stack.getMetaData()
assert deserialized_stack.getBottom() == container_stack.getBottom()
assert deserialized_stack.getTop() == container_stack.getTop()
def createExtruderTrain(self, extruder_definition: DefinitionContainerInterface, machine_definition: DefinitionContainerInterface,
position, machine_id: str) -> None:
# Cache some things.
container_registry = ContainerRegistry.getInstance()
machine_definition_id = Application.getInstance().getMachineManager().getQualityDefinitionId(machine_definition)
# Create a container stack for this extruder.
extruder_stack_id = container_registry.uniqueName(extruder_definition.getId())
container_stack = ContainerStack(extruder_stack_id)
container_stack.setName(extruder_definition.getName()) # Take over the display name to display the stack with.
container_stack.addMetaDataEntry("type", "extruder_train")
container_stack.addMetaDataEntry("machine", machine_id)
container_stack.addMetaDataEntry("position", position)
container_stack.addContainer(extruder_definition)
# Find the variant to use for this extruder.
variant = container_registry.findInstanceContainers(id = "empty_variant")[0]
if machine_definition.getMetaDataEntry("has_variants"):
# First add any variant. Later, overwrite with preference if the preference is valid.
variants = container_registry.findInstanceContainers(definition = machine_definition_id, type = "variant")
if len(variants) >= 1:
variant = variants[0]
preferred_variant_id = machine_definition.getMetaDataEntry("preferred_variant")
if preferred_variant_id:
preferred_variants = container_registry.findInstanceContainers(id = preferred_variant_id, definition = machine_definition_id, type = "variant")
if len(preferred_variants) >= 1:
variant = preferred_variants[0]
else:
Logger.log("w", "The preferred variant \"%s\" of machine %s doesn't exist or is not a variant profile.", preferred_variant_id, machine_id)
# And leave it at the default variant.
container_stack.addContainer(variant)
# Find a material to use for this variant.
material = container_registry.findInstanceContainers(id = "empty_material")[0]
if machine_definition.getMetaDataEntry("has_materials"):
# First add any material. Later, overwrite with preference if the preference is valid.
machine_has_variant_materials = machine_definition.getMetaDataEntry("has_variant_materials", default = False)
if machine_has_variant_materials or machine_has_variant_materials == "True":
materials = container_registry.findInstanceContainers(type = "material", definition = machine_definition_id, variant = variant.getId())
else:
materials = container_registry.findInstanceContainers(type = "material", definition = machine_definition_id)
if len(materials) >= 1:
material = materials[0]
preferred_material_id = machine_definition.getMetaDataEntry("preferred_material")
if preferred_material_id:
global_stack = ContainerRegistry.getInstance().findContainerStacks(id = machine_id)
if global_stack:
approximate_material_diameter = str(round(global_stack[0].getProperty("material_diameter", "value")))
else:
approximate_material_diameter = str(round(machine_definition.getProperty("material_diameter", "value")))
search_criteria = { "type": "material", "id": preferred_material_id, "approximate_diameter": approximate_material_diameter}
if machine_definition.getMetaDataEntry("has_machine_materials"):
search_criteria["definition"] = machine_definition_id
if machine_definition.getMetaDataEntry("has_variants") and variant:
search_criteria["variant"] = variant.id
else:
search_criteria["definition"] = "fdmprinter"
preferred_materials = container_registry.findInstanceContainers(**search_criteria)
if len(preferred_materials) >= 1:
# In some cases we get multiple materials. In that case, prefer materials that are marked as read only.
read_only_preferred_materials = [preferred_material for preferred_material in preferred_materials if preferred_material.isReadOnly()]
if len(read_only_preferred_materials) >= 1:
material = read_only_preferred_materials[0]
else:
material = preferred_materials[0]
else:
Logger.log("w", "The preferred material \"%s\" of machine %s doesn't exist or is not a material profile.", preferred_material_id, machine_id)
# And leave it at the default material.
container_stack.addContainer(material)
# Find a quality to use for this extruder.
quality = container_registry.getEmptyInstanceContainer()
search_criteria = { "type": "quality" }
if machine_definition.getMetaDataEntry("has_machine_quality"):
search_criteria["definition"] = machine_definition_id
if machine_definition.getMetaDataEntry("has_materials") and material:
search_criteria["material"] = material.id
else:
search_criteria["definition"] = "fdmprinter"
preferred_quality = machine_definition.getMetaDataEntry("preferred_quality")
if preferred_quality:
search_criteria["id"] = preferred_quality
containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
if not containers and preferred_quality:
Logger.log("w", "The preferred quality \"%s\" of machine %s doesn't exist or is not a quality profile.", preferred_quality, machine_id)
search_criteria.pop("id", None)
containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
if containers:
quality = containers[0]
container_stack.addContainer(quality)
empty_quality_changes = container_registry.findInstanceContainers(id = "empty_quality_changes")[0]
container_stack.addContainer(empty_quality_changes)
user_profile = container_registry.findInstanceContainers(type = "user", extruder = extruder_stack_id)
if user_profile: # There was already a user profile, loaded from settings.
user_profile = user_profile[0]
else:
user_profile = InstanceContainer(extruder_stack_id + "_current_settings") # Add an empty user profile.
user_profile.addMetaDataEntry("type", "user")
user_profile.addMetaDataEntry("extruder", extruder_stack_id)
from cura.CuraApplication import CuraApplication
user_profile.addMetaDataEntry("setting_version", CuraApplication.SettingVersion)
user_profile.setDefinition(machine_definition)
container_registry.addContainer(user_profile)
container_stack.addContainer(user_profile)
# regardless of what the next stack is, we have to set it again, because of signal routing.
container_stack.setNextStack(Application.getInstance().getGlobalContainerStack())
container_registry.addContainer(container_stack)
def createExtruderTrain(self, extruder_definition: DefinitionContainerInterface, machine_definition: DefinitionContainerInterface,
position, machine_id: str) -> None:
# Cache some things.
container_registry = ContainerRegistry.getInstance()
machine_definition_id = Application.getInstance().getMachineManager().getQualityDefinitionId(machine_definition)
# Create a container stack for this extruder.
extruder_stack_id = container_registry.uniqueName(extruder_definition.getId())
container_stack = ContainerStack(extruder_stack_id)
container_stack.setName(extruder_definition.getName()) # Take over the display name to display the stack with.
container_stack.addMetaDataEntry("type", "extruder_train")
container_stack.addMetaDataEntry("machine", machine_id)
container_stack.addMetaDataEntry("position", position)
container_stack.addContainer(extruder_definition)
# Find the variant to use for this extruder.
variant = container_registry.findInstanceContainers(id = "empty_variant")[0]
if machine_definition.getMetaDataEntry("has_variants"):
# First add any variant. Later, overwrite with preference if the preference is valid.
variants = container_registry.findInstanceContainers(definition = machine_definition_id, type = "variant")
if len(variants) >= 1:
variant = variants[0]
preferred_variant_id = machine_definition.getMetaDataEntry("preferred_variant")
if preferred_variant_id:
preferred_variants = container_registry.findInstanceContainers(id = preferred_variant_id, definition = machine_definition_id, type = "variant")
if len(preferred_variants) >= 1:
variant = preferred_variants[0]
else:
Logger.log("w", "The preferred variant \"%s\" of machine %s doesn't exist or is not a variant profile.", preferred_variant_id, machine_id)
# And leave it at the default variant.
container_stack.addContainer(variant)
# Find a material to use for this variant.
material = container_registry.findInstanceContainers(id = "empty_material")[0]
if machine_definition.getMetaDataEntry("has_materials"):
# First add any material. Later, overwrite with preference if the preference is valid.
machine_has_variant_materials = machine_definition.getMetaDataEntry("has_variant_materials", default = False)
if machine_has_variant_materials or machine_has_variant_materials == "True":
materials = container_registry.findInstanceContainers(type = "material", definition = machine_definition_id, variant = variant.getId())
else:
materials = container_registry.findInstanceContainers(type = "material", definition = machine_definition_id)
if len(materials) >= 1:
material = materials[0]
preferred_material_id = machine_definition.getMetaDataEntry("preferred_material")
if preferred_material_id:
global_stack = ContainerRegistry.getInstance().findContainerStacks(id = machine_id)
if global_stack:
approximate_material_diameter = str(round(global_stack[0].getProperty("material_diameter", "value")))
else:
approximate_material_diameter = str(round(machine_definition.getProperty("material_diameter", "value")))
search_criteria = { "type": "material", "id": preferred_material_id, "approximate_diameter": approximate_material_diameter}
if machine_definition.getMetaDataEntry("has_machine_materials"):
search_criteria["definition"] = machine_definition_id
if machine_definition.getMetaDataEntry("has_variants") and variant:
search_criteria["variant"] = variant.id
else:
search_criteria["definition"] = "fdmprinter"
preferred_materials = container_registry.findInstanceContainers(**search_criteria)
if len(preferred_materials) >= 1:
# In some cases we get multiple materials. In that case, prefer materials that are marked as read only.
read_only_preferred_materials = [preferred_material for preferred_material in preferred_materials if preferred_material.isReadOnly()]
if len(read_only_preferred_materials) >= 1:
material = read_only_preferred_materials[0]
else:
material = preferred_materials[0]
else:
Logger.log("w", "The preferred material \"%s\" of machine %s doesn't exist or is not a material profile.", preferred_material_id, machine_id)
# And leave it at the default material.
container_stack.addContainer(material)
# Find a quality to use for this extruder.
quality = container_registry.getEmptyInstanceContainer()
search_criteria = { "type": "quality" }
if machine_definition.getMetaDataEntry("has_machine_quality"):
search_criteria["definition"] = machine_definition_id
if machine_definition.getMetaDataEntry("has_materials") and material:
search_criteria["material"] = material.id
else:
search_criteria["definition"] = "fdmprinter"
preferred_quality = machine_definition.getMetaDataEntry("preferred_quality")
if preferred_quality:
search_criteria["id"] = preferred_quality
containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
if not containers and preferred_quality:
Logger.log("w", "The preferred quality \"%s\" of machine %s doesn't exist or is not a quality profile.", preferred_quality, machine_id)
search_criteria.pop("id", None)
containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
if containers:
quality = containers[0]
container_stack.addContainer(quality)
empty_quality_changes = container_registry.findInstanceContainers(id = "empty_quality_changes")[0]
container_stack.addContainer(empty_quality_changes)
user_profile = container_registry.findInstanceContainers(type = "user", extruder = extruder_stack_id)
if user_profile: # There was already a user profile, loaded from settings.
user_profile = user_profile[0]
else:
user_profile = InstanceContainer(extruder_stack_id + "_current_settings") # Add an empty user profile.
user_profile.addMetaDataEntry("type", "user")
user_profile.addMetaDataEntry("extruder", extruder_stack_id)
from cura.CuraApplication import CuraApplication
user_profile.addMetaDataEntry("setting_version", CuraApplication.SettingVersion)
user_profile.setDefinition(machine_definition)
container_registry.addContainer(user_profile)
container_stack.addContainer(user_profile)
# regardless of what the next stack is, we have to set it again, because of signal routing.
container_stack.setNextStack(Application.getInstance().getGlobalContainerStack())
container_registry.addContainer(container_stack)
