def testC_FailTest(self):
"""
_FailTest_
THIS TEST IS DANGEROUS!
Figure out what happens when we trigger rollbacks
"""
myThread = threading.currentThread()
config = self.createConfig()
config.DBSUpload.abortStepTwo = True
originalOut = sys.stdout
originalErr = sys.stderr
dbsInterface = DBSInterface(config=config)
localAPI = dbsInterface.getAPIRef()
globeAPI = dbsInterface.getAPIRef(globalRef=True)
name = "ThisIsATest_%s" % (makeUUID())
tier = "RECO"
nFiles = 12
files = self.getFiles(name=name, tier=tier, nFiles=nFiles)
datasetPath = "/%s/%s/%s" % (name, name, tier)
testDBSUpload = DBSUploadPoller(config=config)
try:
testDBSUpload.algorithm()
except Exception, ex:
pass
def testF_DBSUploadQueueSizeCheckForAlerts(self):
"""
Test will not trigger a real alert being sent unless doing some
mocking of the methods used during DBSUploadPoller.algorithm() ->
DBSUploadPoller.uploadBlocks() method.
As done here, it probably can't be deterministic, yet the feature
shall be checked.
"""
sizeLevelToTest = 1
myThread = threading.currentThread()
config = self.createConfig()
# threshold / value to check
config.DBSUpload.alertUploadQueueSize = sizeLevelToTest
# without this uploadBlocks method returns immediately
name = "ThisIsATest_%s" % (makeUUID())
tier = "RECO"
nFiles = sizeLevelToTest + 1
files = self.getFiles(name=name, tier=tier, nFiles=nFiles)
datasetPath = "/%s/%s/%s" % (name, name, tier)
# load components that are necessary to check status
# (this seems necessary, else some previous tests started failing)
factory = WMFactory("dbsUpload", "WMComponent.DBSUpload.Database.Interface")
dbinterface = factory.loadObject("UploadToDBS")
dbsInterface = DBSInterface(config=config)
localAPI = dbsInterface.getAPIRef()
globeAPI = dbsInterface.getAPIRef(globalRef=True)
testDBSUpload = DBSUploadPoller(config)
# this is finally where the action (alert) should be triggered from
testDBSUpload.algorithm()
return
def testF_DBSUploadQueueSizeCheckForAlerts(self):
"""
Test will not trigger a real alert being sent unless doing some
mocking of the methods used during DBSUploadPoller.algorithm() ->
DBSUploadPoller.uploadBlocks() method.
As done here, it probably can't be deterministic, yet the feature
shall be checked.
"""
sizeLevelToTest = 1
myThread = threading.currentThread()
config = self.createConfig()
# threshold / value to check
config.DBSUpload.alertUploadQueueSize = sizeLevelToTest
# without this uploadBlocks method returns immediately
name = "ThisIsATest_%s" % (makeUUID())
tier = "RECO"
nFiles = sizeLevelToTest + 1
files = self.getFiles(name = name, tier = tier, nFiles = nFiles)
datasetPath = '/%s/%s/%s' % (name, name, tier)
# load components that are necessary to check status
# (this seems necessary, else some previous tests started failing)
factory = WMFactory("dbsUpload", "WMComponent.DBSUpload.Database.Interface")
dbinterface = factory.loadObject("UploadToDBS")
dbsInterface = DBSInterface(config = config)
localAPI = dbsInterface.getAPIRef()
globeAPI = dbsInterface.getAPIRef(globalRef = True)
testDBSUpload = DBSUploadPoller(config)
# this is finally where the action (alert) should be triggered from
testDBSUpload.algorithm()
return
def testC_FailTest(self):
"""
_FailTest_
THIS TEST IS DANGEROUS!
Figure out what happens when we trigger rollbacks
"""
myThread = threading.currentThread()
config = self.createConfig()
config.DBSUpload.abortStepTwo = True
originalOut = sys.stdout
originalErr = sys.stderr
dbsInterface = DBSInterface(config = config)
localAPI = dbsInterface.getAPIRef()
globeAPI = dbsInterface.getAPIRef(globalRef = True)
name = "ThisIsATest_%s" % (makeUUID())
tier = "RECO"
nFiles = 12
files = self.getFiles(name = name, tier = tier, nFiles = nFiles)
datasetPath = '/%s/%s/%s' % (name, name, tier)
testDBSUpload = DBSUploadPoller(config = config)
try:
testDBSUpload.algorithm()
except Exception, ex:
pass
def testE_NoMigration(self):
"""
_NoMigration_
Test the DBSUpload system with no global migration
"""
myThread = threading.currentThread()
config = self.createConfig()
self.injectWorkflow(MaxWaitTime=3)
config.DBSInterface.doGlobalMigration = False
config.DBSUpload.pollInterval = 4
name = "ThisIsATest_%s" % (makeUUID())
tier = "RECO"
nFiles = 12
files = self.getFiles(name=name, tier=tier, nFiles=nFiles)
datasetPath = '/%s/%s/%s' % (name, name, tier)
# Load components that are necessary to check status
factory = WMFactory("dbsUpload",
"WMComponent.DBSUpload.Database.Interface")
dbinterface = factory.loadObject("UploadToDBS")
dbsInterface = DBSInterface(config=config)
localAPI = dbsInterface.getAPIRef()
globeAPI = dbsInterface.getAPIRef(globalRef=True)
# In the first round we should create blocks for the first dataset
# The child dataset should not be handled until the parent is uploaded
testDBSUpload = DBSUploadPoller(config=config)
testDBSUpload.algorithm()
# First, see if there are any blocks
# One in DBS, one not in DBS
result = myThread.dbi.processData(
"SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(len(result), 2)
self.assertEqual(result, [('InGlobalDBS', ), ('Open', )])
result = myThread.dbi.processData(
"SELECT status FROM dbsbuffer_file WHERE dataset_algo = 1"
)[0].fetchall()
for r in result:
self.assertEqual(r[0], 'GLOBAL')
return
def testE_NoMigration(self):
"""
_NoMigration_
Test the DBSUpload system with no global migration
"""
myThread = threading.currentThread()
config = self.createConfig()
config.DBSInterface.DBSBlockMaxTime = 3
config.DBSInterface.doGlobalMigration = False
config.DBSUpload.pollInterval = 4
name = "ThisIsATest_%s" % (makeUUID())
tier = "RECO"
nFiles = 12
files = self.getFiles(name = name, tier = tier, nFiles = nFiles)
datasetPath = '/%s/%s/%s' % (name, name, tier)
# Load components that are necessary to check status
factory = WMFactory("dbsUpload", "WMComponent.DBSUpload.Database.Interface")
dbinterface = factory.loadObject("UploadToDBS")
dbsInterface = DBSInterface(config = config)
localAPI = dbsInterface.getAPIRef()
globeAPI = dbsInterface.getAPIRef(globalRef = True)
# In the first round we should create blocks for the first dataset
# The child dataset should not be handled until the parent is uploaded
testDBSUpload = DBSUploadPoller(config = config)
testDBSUpload.algorithm()
# First, see if there are any blocks
# One in DBS, one not in DBS
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(len(result), 2)
self.assertEqual(result, [('InGlobalDBS',), ('Open',)])
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_file WHERE dataset_algo = 1")[0].fetchall()
for r in result:
self.assertEqual(r[0], 'GLOBAL')
return
def testC_FailTest(self):
"""
_FailTest_
THIS TEST IS DANGEROUS!
Figure out what happens when we trigger rollbacks
"""
myThread = threading.currentThread()
config = self.createConfig()
config.DBSUpload.abortStepTwo = True
originalOut = sys.stdout
originalErr = sys.stderr
dbsInterface = DBSInterface(config=config)
localAPI = dbsInterface.getAPIRef()
globeAPI = dbsInterface.getAPIRef(globalRef=True)
name = "ThisIsATest_%s" % (makeUUID())
tier = "RECO"
nFiles = 12
files = self.getFiles(name=name, tier=tier, nFiles=nFiles)
datasetPath = '/%s/%s/%s' % (name, name, tier)
testDBSUpload = DBSUploadPoller(config=config)
try:
testDBSUpload.algorithm()
except Exception as ex:
pass
# Aborting in step two should result in no results
result = myThread.dbi.processData(
"SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(len(result), 0)
config.DBSUpload.abortStepTwo = False
config.DBSUpload.abortStepThree = True
testDBSUpload = DBSUploadPoller(config=config)
try:
testDBSUpload.algorithm()
except Exception as ex:
pass
result = myThread.dbi.processData(
"SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(result, [('Pending', ), ('Open', )])
result = myThread.dbi.processData(
"SELECT status FROM dbsbuffer_file WHERE dataset_algo = 1"
)[0].fetchall()
for res in result:
self.assertEqual(res[0], 'READY')
config.DBSUpload.abortStepThree = False
self.injectWorkflow(MaxWaitTime=300)
testDBSUpload = DBSUploadPoller(config=config)
testDBSUpload.algorithm()
# After this, one block should have been uploaded, one should still be open
# This is the result of the pending block updating, and the open block staying open
result = myThread.dbi.processData(
"SELECT status, id FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(result, [('InGlobalDBS', 3), ('Open', 4)])
# Check that one block got there
result = listBlocks(apiRef=globeAPI, datasetPath=datasetPath)
self.assertEqual(len(result), 1)
self.assertEqual(result[0]['NumberOfFiles'], 10)
self.assertEqual(result[0]['NumberOfEvents'], 200)
self.assertEqual(result[0]['BlockSize'], 10240)
# Check that ten files got there
result = listDatasetFiles(apiRef=globeAPI, datasetPath=datasetPath)
self.assertEqual(len(result), 10)
myThread.dbi.processData(
"UPDATE dbsbuffer_workflow SET block_close_max_wait_time = 1")
testDBSUpload = DBSUploadPoller(config=config)
time.sleep(3)
testDBSUpload.algorithm()
result = myThread.dbi.processData(
"SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(result, [('InGlobalDBS', ), ('InGlobalDBS', )])
result = listDatasetFiles(apiRef=globeAPI, datasetPath=datasetPath)
self.assertEqual(len(result), 12)
fileLFNs = [x['lfn'] for x in files]
for lfn in fileLFNs:
self.assertTrue(lfn in result)
testDBSUpload.algorithm()
result = myThread.dbi.processData(
"SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(result, [('InGlobalDBS', ), ('InGlobalDBS', ),
('Open', )])
time.sleep(5)
testDBSUpload.algorithm()
time.sleep(2)
result = myThread.dbi.processData(
"SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(result, [('InGlobalDBS', ), ('InGlobalDBS', ),
('InGlobalDBS', )])
result = listDatasetFiles(apiRef=globeAPI,
datasetPath='/%s/%s_2/%s' %
(name, name, tier))
self.assertEqual(len(result), 1)
sys.stdout = originalOut
sys.stderr = originalErr
return
def testB_AlgoMigration(self):
"""
_AlgoMigration_
Test our ability to migrate multiple algos to global
Do this by creating, mid-poll, two separate batches of files
One with the same dataset but a different algo
One with the same algo, but a different dataset
See that they both get to global
"""
#raise nose.SkipTest
myThread = threading.currentThread()
config = self.createConfig()
self.injectWorkflow(MaxWaitTime=20)
name = "ThisIsATest_%s" % (makeUUID())
tier = "RECO"
nFiles = 12
files = self.getFiles(name=name, tier=tier, nFiles=nFiles)
datasetPath = '/%s/%s/%s' % (name, name, tier)
# Load components that are necessary to check status
factory = WMFactory("dbsUpload",
"WMComponent.DBSUpload.Database.Interface")
dbinterface = factory.loadObject("UploadToDBS")
dbsInterface = DBSInterface(config=config)
localAPI = dbsInterface.getAPIRef()
globeAPI = dbsInterface.getAPIRef(globalRef=True)
testDBSUpload = DBSUploadPoller(config=config)
testDBSUpload.algorithm()
# There should now be one block
result = listBlocks(apiRef=globeAPI, datasetPath=datasetPath)
self.assertEqual(len(result), 1)
# Okay, by now, the first migration should have gone through.
# Now create a second batch of files with the same dataset
# but a different algo.
for i in range(0, nFiles):
testFile = DBSBufferFile(lfn='%s-batch2-%i' % (name, i),
size=1024,
events=20,
checksums={'cksum': 1},
locations="malpaquet")
testFile.setAlgorithm(appName="cmsRun",
appVer="CMSSW_3_1_1",
appFam=tier,
psetHash="GIBBERISH_PART2",
configContent=self.configURL)
testFile.setDatasetPath(datasetPath)
testFile.addRun(Run(1, *[46]))
testFile.create()
# Have to do things twice to get parents
testDBSUpload.algorithm()
testDBSUpload.algorithm()
# There should now be two blocks
result = listBlocks(apiRef=globeAPI, datasetPath=datasetPath)
self.assertEqual(len(result), 2)
# Now create another batch of files with the original algo
# But in a different dataset
for i in range(0, nFiles):
testFile = DBSBufferFile(lfn='%s-batch3-%i' % (name, i),
size=1024,
events=20,
checksums={'cksum': 1},
locations="malpaquet")
testFile.setAlgorithm(appName=name,
appVer="CMSSW_3_1_1",
appFam=tier,
psetHash="GIBBERISH",
configContent=self.configURL)
testFile.setDatasetPath('/%s/%s_3/%s' % (name, name, tier))
testFile.addRun(Run(1, *[46]))
testFile.create()
# Do it twice for parentage.
testDBSUpload.algorithm()
testDBSUpload.algorithm()
# There should now be one block
result = listBlocks(apiRef=globeAPI,
datasetPath='/%s/%s_3/%s' % (name, name, tier))
self.assertEqual(len(result), 1)
# Well, all the blocks got there, so we're done
return
def testA_basicUploadTest(self):
"""
_basicUploadTest_
Do everything simply once
Create dataset, algo, files, blocks,
upload them,
mark as done, finish them, migrate them
Also check the timeout
"""
myThread = threading.currentThread()
config = self.createConfig()
self.injectWorkflow(MaxWaitTime=3)
config.DBSUpload.pollInterval = 4
name = "ThisIsATest_%s" % (makeUUID())
tier = "RECO"
nFiles = 12
files = self.getFiles(name=name, tier=tier, nFiles=nFiles)
datasetPath = '/%s/%s/%s' % (name, name, tier)
# Load components that are necessary to check status
factory = WMFactory("dbsUpload",
"WMComponent.DBSUpload.Database.Interface")
dbinterface = factory.loadObject("UploadToDBS")
dbsInterface = DBSInterface(config=config)
localAPI = dbsInterface.getAPIRef()
globeAPI = dbsInterface.getAPIRef(globalRef=True)
# In the first round we should create blocks for the first dataset
# The child dataset should not be handled until the parent is uploaded
testDBSUpload = DBSUploadPoller(config=config)
testDBSUpload.algorithm()
# First, see if there are any blocks
# One in DBS, one not in DBS
result = myThread.dbi.processData(
"SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(len(result), 2)
self.assertEqual(result, [('InGlobalDBS', ), ('Open', )])
# Check to see if datasets and algos are in local DBS
result = listAlgorithms(apiRef=localAPI, patternExe=name)
self.assertEqual(len(result), 1)
self.assertEqual(result[0]['ExecutableName'], name)
result = listPrimaryDatasets(apiRef=localAPI, match=name)
self.assertEqual(result, [name])
result = listProcessedDatasets(apiRef=localAPI,
primary=name,
dataTier="*")
# Then check and see that the closed block made it into local DBS
affectedBlocks = listBlocks(apiRef=localAPI, datasetPath=datasetPath)
if affectedBlocks[0]['OpenForWriting'] == '0':
self.assertEqual(affectedBlocks[1]['OpenForWriting'], '1')
self.assertEqual(affectedBlocks[0]['NumberOfFiles'], 10)
self.assertEqual(affectedBlocks[1]['NumberOfFiles'], 2)
else:
self.assertEqual(affectedBlocks[0]['OpenForWriting'], '1')
self.assertEqual(affectedBlocks[1]['NumberOfFiles'], 10)
self.assertEqual(affectedBlocks[0]['NumberOfFiles'], 2)
# Check to make sure all the files are in local
result = listDatasetFiles(apiRef=localAPI, datasetPath=datasetPath)
fileLFNs = [x['lfn'] for x in files]
for lfn in fileLFNs:
self.assertTrue(lfn in result)
# Make sure the child files aren't there
flag = False
try:
listDatasetFiles(apiRef=localAPI,
datasetPath='/%s/%s_2/%s' % (name, name, tier))
except Exception as ex:
flag = True
self.assertTrue(flag)
# There should be one blocks in global
# It should have ten files and be closed
result = listBlocks(apiRef=globeAPI, datasetPath=datasetPath)
self.assertEqual(len(result), 1)
for block in result:
self.assertEqual(block['OpenForWriting'], '0')
self.assertTrue(block['NumberOfFiles'] in [2, 10])
# Okay, deep breath. First round done
# In the second round, the second block of the parent fileset should transfer
# Make sure that the timeout functions work
time.sleep(10)
testDBSUpload.algorithm()
result = myThread.dbi.processData(
"SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(len(result), 2)
self.assertEqual(result, [('InGlobalDBS', ), ('InGlobalDBS', )])
# Check to make sure all the files are in global
result = listDatasetFiles(apiRef=globeAPI, datasetPath=datasetPath)
for lfn in fileLFNs:
self.assertTrue(lfn in result)
# Make sure the child files aren't there
flag = False
try:
listDatasetFiles(apiRef=localAPI,
datasetPath='/%s/%s_2/%s' % (name, name, tier))
except Exception as ex:
flag = True
self.assertTrue(flag)
# Third round
# Both of the parent blocks should have transferred
# So the child block should now transfer
testDBSUpload.algorithm()
result = myThread.dbi.processData(
"SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(result, [('InGlobalDBS', ), ('InGlobalDBS', ),
('Open', )])
flag = False
try:
result = listDatasetFiles(apiRef=localAPI,
datasetPath='/%s/%s_2/%s' %
(name, name, tier))
except Exception as ex:
flag = True
self.assertFalse(flag)
self.assertEqual(len(result), 1)
return
def testB_AlgoMigration(self):
"""
_AlgoMigration_
Test our ability to migrate multiple algos to global
Do this by creating, mid-poll, two separate batches of files
One with the same dataset but a different algo
One with the same algo, but a different dataset
See that they both get to global
"""
# raise nose.SkipTest
myThread = threading.currentThread()
config = self.createConfig()
config.DBSInterface.DBSBlockMaxTime = 20
name = "ThisIsATest_%s" % (makeUUID())
tier = "RECO"
nFiles = 12
files = self.getFiles(name=name, tier=tier, nFiles=nFiles)
datasetPath = "/%s/%s/%s" % (name, name, tier)
# Load components that are necessary to check status
factory = WMFactory("dbsUpload", "WMComponent.DBSUpload.Database.Interface")
dbinterface = factory.loadObject("UploadToDBS")
dbsInterface = DBSInterface(config=config)
localAPI = dbsInterface.getAPIRef()
globeAPI = dbsInterface.getAPIRef(globalRef=True)
testDBSUpload = DBSUploadPoller(config=config)
testDBSUpload.algorithm()
# There should now be one block
result = listBlocks(apiRef=globeAPI, datasetPath=datasetPath)
self.assertEqual(len(result), 1)
# Okay, by now, the first migration should have gone through.
# Now create a second batch of files with the same dataset
# but a different algo.
for i in range(0, nFiles):
testFile = DBSBufferFile(
lfn="%s-batch2-%i" % (name, i), size=1024, events=20, checksums={"cksum": 1}, locations="malpaquet"
)
testFile.setAlgorithm(
appName="cmsRun",
appVer="CMSSW_3_1_1",
appFam=tier,
psetHash="GIBBERISH_PART2",
configContent=self.configURL,
)
testFile.setDatasetPath(datasetPath)
testFile.addRun(Run(1, *[46]))
testFile.create()
# Have to do things twice to get parents
testDBSUpload.algorithm()
testDBSUpload.algorithm()
# There should now be two blocks
result = listBlocks(apiRef=globeAPI, datasetPath=datasetPath)
self.assertEqual(len(result), 2)
# Now create another batch of files with the original algo
# But in a different dataset
for i in range(0, nFiles):
testFile = DBSBufferFile(
lfn="%s-batch3-%i" % (name, i), size=1024, events=20, checksums={"cksum": 1}, locations="malpaquet"
)
testFile.setAlgorithm(
appName=name, appVer="CMSSW_3_1_1", appFam=tier, psetHash="GIBBERISH", configContent=self.configURL
)
testFile.setDatasetPath("/%s/%s_3/%s" % (name, name, tier))
testFile.addRun(Run(1, *[46]))
testFile.create()
# Do it twice for parentage.
testDBSUpload.algorithm()
testDBSUpload.algorithm()
# There should now be one block
result = listBlocks(apiRef=globeAPI, datasetPath="/%s/%s_3/%s" % (name, name, tier))
self.assertEqual(len(result), 1)
# Well, all the blocks got there, so we're done
return
def testA_basicUploadTest(self):
"""
_basicUploadTest_
Do everything simply once
Create dataset, algo, files, blocks,
upload them,
mark as done, finish them, migrate them
Also check the timeout
"""
myThread = threading.currentThread()
config = self.createConfig()
config.DBSInterface.DBSBlockMaxTime = 3
config.DBSUpload.pollInterval = 4
name = "ThisIsATest_%s" % (makeUUID())
tier = "RECO"
nFiles = 12
files = self.getFiles(name=name, tier=tier, nFiles=nFiles)
datasetPath = "/%s/%s/%s" % (name, name, tier)
# Load components that are necessary to check status
factory = WMFactory("dbsUpload", "WMComponent.DBSUpload.Database.Interface")
dbinterface = factory.loadObject("UploadToDBS")
dbsInterface = DBSInterface(config=config)
localAPI = dbsInterface.getAPIRef()
globeAPI = dbsInterface.getAPIRef(globalRef=True)
# In the first round we should create blocks for the first dataset
# The child dataset should not be handled until the parent is uploaded
testDBSUpload = DBSUploadPoller(config=config)
testDBSUpload.algorithm()
# First, see if there are any blocks
# One in DBS, one not in DBS
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(len(result), 2)
self.assertEqual(result, [("InGlobalDBS",), ("Open",)])
# Check to see if datasets and algos are in local DBS
result = listAlgorithms(apiRef=localAPI, patternExe=name)
self.assertEqual(len(result), 1)
self.assertEqual(result[0]["ExecutableName"], name)
result = listPrimaryDatasets(apiRef=localAPI, match=name)
self.assertEqual(result, [name])
result = listProcessedDatasets(apiRef=localAPI, primary=name, dataTier="*")
# Then check and see that the closed block made it into local DBS
affectedBlocks = listBlocks(apiRef=localAPI, datasetPath=datasetPath)
if affectedBlocks[0]["OpenForWriting"] == "0":
self.assertEqual(affectedBlocks[1]["OpenForWriting"], "1")
self.assertEqual(affectedBlocks[0]["NumberOfFiles"], 10)
self.assertEqual(affectedBlocks[1]["NumberOfFiles"], 2)
else:
self.assertEqual(affectedBlocks[0]["OpenForWriting"], "1")
self.assertEqual(affectedBlocks[1]["NumberOfFiles"], 10)
self.assertEqual(affectedBlocks[0]["NumberOfFiles"], 2)
# Check to make sure all the files are in local
result = listDatasetFiles(apiRef=localAPI, datasetPath=datasetPath)
fileLFNs = [x["lfn"] for x in files]
for lfn in fileLFNs:
self.assertTrue(lfn in result)
# Make sure the child files aren't there
flag = False
try:
listDatasetFiles(apiRef=localAPI, datasetPath="/%s/%s_2/%s" % (name, name, tier))
except Exception, ex:
flag = True
try:
testDBSUpload.algorithm()
except Exception, ex:
pass
# Aborting in step two should result in no results
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(len(result), 0)
config.DBSUpload.abortStepTwo = False
config.DBSUpload.abortStepThree = True
testDBSUpload = DBSUploadPoller(config=config)
try:
testDBSUpload.algorithm()
except Exception, ex:
pass
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(result, [("Pending",), ("Open",)])
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_file WHERE dataset_algo = 1")[0].fetchall()
for res in result:
self.assertEqual(res[0], "READY")
config.DBSUpload.abortStepThree = False
config.DBSInterface.DBSBlockMaxTime = 300
testDBSUpload = DBSUploadPoller(config=config)
testDBSUpload.algorithm()
# After this, one block should have been uploaded, one should still be open
try:
testDBSUpload.algorithm()
except Exception, ex:
pass
# Aborting in step two should result in no results
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(len(result), 0)
config.DBSUpload.abortStepTwo = False
config.DBSUpload.abortStepThree = True
testDBSUpload = DBSUploadPoller(config = config)
try:
testDBSUpload.algorithm()
except Exception, ex:
pass
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(result, [('Pending',), ('Open',)])
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_file WHERE dataset_algo = 1")[0].fetchall()
for res in result:
self.assertEqual(res[0], 'READY')
config.DBSUpload.abortStepThree = False
config.DBSInterface.DBSBlockMaxTime = 300
testDBSUpload = DBSUploadPoller(config = config)
testDBSUpload.algorithm()
def testC_FailTest(self):
"""
_FailTest_
THIS TEST IS DANGEROUS!
Figure out what happens when we trigger rollbacks
"""
myThread = threading.currentThread()
config = self.createConfig()
config.DBSUpload.abortStepTwo = True
originalOut = sys.stdout
originalErr = sys.stderr
dbsInterface = DBSInterface(config = config)
localAPI = dbsInterface.getAPIRef()
globeAPI = dbsInterface.getAPIRef(globalRef = True)
name = "ThisIsATest_%s" % (makeUUID())
tier = "RECO"
nFiles = 12
files = self.getFiles(name = name, tier = tier, nFiles = nFiles)
datasetPath = '/%s/%s/%s' % (name, name, tier)
testDBSUpload = DBSUploadPoller(config = config)
try:
testDBSUpload.algorithm()
except Exception as ex:
pass
# Aborting in step two should result in no results
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(len(result), 0)
config.DBSUpload.abortStepTwo = False
config.DBSUpload.abortStepThree = True
testDBSUpload = DBSUploadPoller(config = config)
try:
testDBSUpload.algorithm()
except Exception as ex:
pass
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(result, [('Pending',), ('Open',)])
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_file WHERE dataset_algo = 1")[0].fetchall()
for res in result:
self.assertEqual(res[0], 'READY')
config.DBSUpload.abortStepThree = False
self.injectWorkflow(MaxWaitTime = 300)
testDBSUpload = DBSUploadPoller(config = config)
testDBSUpload.algorithm()
# After this, one block should have been uploaded, one should still be open
# This is the result of the pending block updating, and the open block staying open
result = myThread.dbi.processData("SELECT status, id FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(result, [('InGlobalDBS', 3L), ('Open', 4L)])
# Check that one block got there
result = listBlocks(apiRef = globeAPI, datasetPath = datasetPath)
self.assertEqual(len(result), 1)
self.assertEqual(result[0]['NumberOfFiles'], 10)
self.assertEqual(result[0]['NumberOfEvents'], 200)
self.assertEqual(result[0]['BlockSize'], 10240)
# Check that ten files got there
result = listDatasetFiles(apiRef = globeAPI, datasetPath = datasetPath)
self.assertEqual(len(result), 10)
myThread.dbi.processData("UPDATE dbsbuffer_workflow SET block_close_max_wait_time = 1")
testDBSUpload = DBSUploadPoller(config = config)
time.sleep(3)
testDBSUpload.algorithm()
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(result, [('InGlobalDBS',), ('InGlobalDBS',)])
result = listDatasetFiles(apiRef = globeAPI, datasetPath = datasetPath)
self.assertEqual(len(result), 12)
fileLFNs = [x['lfn'] for x in files]
for lfn in fileLFNs:
self.assertTrue(lfn in result)
testDBSUpload.algorithm()
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(result, [('InGlobalDBS',), ('InGlobalDBS',), ('Open',)])
time.sleep(5)
testDBSUpload.algorithm()
time.sleep(2)
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(result, [('InGlobalDBS',), ('InGlobalDBS',), ('InGlobalDBS',)])
result = listDatasetFiles(apiRef = globeAPI,
datasetPath = '/%s/%s_2/%s' % (name, name, tier))
self.assertEqual(len(result), 1)
sys.stdout = originalOut
sys.stderr = originalErr
return
def testA_basicUploadTest(self):
"""
_basicUploadTest_
Do everything simply once
Create dataset, algo, files, blocks,
upload them,
mark as done, finish them, migrate them
Also check the timeout
"""
myThread = threading.currentThread()
config = self.createConfig()
self.injectWorkflow(MaxWaitTime = 3)
config.DBSUpload.pollInterval = 4
name = "ThisIsATest_%s" % (makeUUID())
tier = "RECO"
nFiles = 12
files = self.getFiles(name = name, tier = tier, nFiles = nFiles)
datasetPath = '/%s/%s/%s' % (name, name, tier)
# Load components that are necessary to check status
factory = WMFactory("dbsUpload", "WMComponent.DBSUpload.Database.Interface")
dbinterface = factory.loadObject("UploadToDBS")
dbsInterface = DBSInterface(config = config)
localAPI = dbsInterface.getAPIRef()
globeAPI = dbsInterface.getAPIRef(globalRef = True)
# In the first round we should create blocks for the first dataset
# The child dataset should not be handled until the parent is uploaded
testDBSUpload = DBSUploadPoller(config = config)
testDBSUpload.algorithm()
# First, see if there are any blocks
# One in DBS, one not in DBS
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(len(result), 2)
self.assertEqual(result, [('InGlobalDBS',), ('Open',)])
# Check to see if datasets and algos are in local DBS
result = listAlgorithms(apiRef = localAPI, patternExe = name)
self.assertEqual(len(result), 1)
self.assertEqual(result[0]['ExecutableName'], name)
result = listPrimaryDatasets(apiRef = localAPI, match = name)
self.assertEqual(result, [name])
result = listProcessedDatasets(apiRef = localAPI, primary = name, dataTier = "*")
# Then check and see that the closed block made it into local DBS
affectedBlocks = listBlocks(apiRef = localAPI, datasetPath = datasetPath)
if affectedBlocks[0]['OpenForWriting'] == '0':
self.assertEqual(affectedBlocks[1]['OpenForWriting'], '1')
self.assertEqual(affectedBlocks[0]['NumberOfFiles'], 10)
self.assertEqual(affectedBlocks[1]['NumberOfFiles'], 2)
else:
self.assertEqual(affectedBlocks[0]['OpenForWriting'], '1')
self.assertEqual(affectedBlocks[1]['NumberOfFiles'], 10)
self.assertEqual(affectedBlocks[0]['NumberOfFiles'], 2)
# Check to make sure all the files are in local
result = listDatasetFiles(apiRef = localAPI, datasetPath = datasetPath)
fileLFNs = [x['lfn'] for x in files]
for lfn in fileLFNs:
self.assertTrue(lfn in result)
# Make sure the child files aren't there
flag = False
try:
listDatasetFiles(apiRef = localAPI,
datasetPath = '/%s/%s_2/%s' % (name, name, tier))
except Exception as ex:
flag = True
self.assertTrue(flag)
# There should be one blocks in global
# It should have ten files and be closed
result = listBlocks(apiRef = globeAPI, datasetPath = datasetPath)
self.assertEqual(len(result), 1)
for block in result:
self.assertEqual(block['OpenForWriting'], '0')
self.assertTrue(block['NumberOfFiles'] in [2, 10])
# Okay, deep breath. First round done
# In the second round, the second block of the parent fileset should transfer
# Make sure that the timeout functions work
time.sleep(10)
testDBSUpload.algorithm()
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(len(result), 2)
self.assertEqual(result, [('InGlobalDBS',), ('InGlobalDBS',)])
# Check to make sure all the files are in global
result = listDatasetFiles(apiRef = globeAPI, datasetPath = datasetPath)
for lfn in fileLFNs:
self.assertTrue(lfn in result)
# Make sure the child files aren't there
flag = False
try:
listDatasetFiles(apiRef = localAPI,
datasetPath = '/%s/%s_2/%s' % (name, name, tier))
except Exception as ex:
flag = True
self.assertTrue(flag)
# Third round
# Both of the parent blocks should have transferred
# So the child block should now transfer
testDBSUpload.algorithm()
result = myThread.dbi.processData("SELECT status FROM dbsbuffer_block")[0].fetchall()
self.assertEqual(result, [('InGlobalDBS',), ('InGlobalDBS',), ('Open',)])
flag = False
try:
result = listDatasetFiles(apiRef = localAPI,
datasetPath = '/%s/%s_2/%s' % (name, name, tier))
except Exception as ex:
flag = True
self.assertFalse(flag)
self.assertEqual(len(result), 1)
return