def inputhook_wx3():
"""Run the wx event loop by processing pending events only.
This is like inputhook_wx1, but it keeps processing pending events
until stdin is ready. After processing all pending events, a call to
time.sleep is inserted. This is needed, otherwise, CPU usage is at 100%.
This sleep time should be tuned though for best performance.
"""
# We need to protect against a user pressing Control-C when IPython is
# idle and this is running. We trap KeyboardInterrupt and pass.
try:
app = wx.GetApp()
if app is not None:
assert wx.Thread_IsMain()
# The import of wx on Linux sets the handler for signal.SIGINT
# to 0. This is a bug in wx or gtk. We fix by just setting it
# back to the Python default.
if not callable(signal.getsignal(signal.SIGINT)):
signal.signal(signal.SIGINT, signal.default_int_handler)
evtloop = wx.EventLoop()
ea = wx.EventLoopActivator(evtloop)
t = clock()
while not stdin_ready():
while evtloop.Pending():
t = clock()
evtloop.Dispatch()
app.ProcessIdle()
# We need to sleep at this point to keep the idle CPU load
# low. However, if sleep to long, GUI response is poor. As
# a compromise, we watch how often GUI events are being processed
# and switch between a short and long sleep time. Here are some
# stats useful in helping to tune this.
# time CPU load
# 0.001 13%
# 0.005 3%
# 0.01 1.5%
# 0.05 0.5%
used_time = clock() - t
if used_time > 10.0:
# print 'Sleep for 1 s' # dbg
time.sleep(1.0)
elif used_time > 0.1:
# Few GUI events coming in, so we can sleep longer
# print 'Sleep for 0.05 s' # dbg
time.sleep(0.05)
else:
# Many GUI events coming in, so sleep only very little
time.sleep(0.001)
del ea
except KeyboardInterrupt:
pass
return 0
def inputhook_glut():
"""Run the pyglet event loop by processing pending events only.
This keeps processing pending events until stdin is ready. After
processing all pending events, a call to time.sleep is inserted. This is
needed, otherwise, CPU usage is at 100%. This sleep time should be tuned
though for best performance.
"""
# We need to protect against a user pressing Control-C when IPython is
# idle and this is running. We trap KeyboardInterrupt and pass.
signal.signal(signal.SIGINT, glut_int_handler)
try:
t = clock()
# Make sure the default window is set after a window has been closed
if glut.glutGetWindow() == 0:
glut.glutSetWindow( 1 )
glutMainLoopEvent()
return 0
while not stdin_ready():
glutMainLoopEvent()
# We need to sleep at this point to keep the idle CPU load
# low. However, if sleep to long, GUI response is poor. As
# a compromise, we watch how often GUI events are being processed
# and switch between a short and long sleep time. Here are some
# stats useful in helping to tune this.
# time CPU load
# 0.001 13%
# 0.005 3%
# 0.01 1.5%
# 0.05 0.5%
used_time = clock() - t
if used_time > 10.0:
# print 'Sleep for 1 s' # dbg
time.sleep(1.0)
elif used_time > 0.1:
# Few GUI events coming in, so we can sleep longer
# print 'Sleep for 0.05 s' # dbg
time.sleep(0.05)
else:
# Many GUI events coming in, so sleep only very little
time.sleep(0.001)
except KeyboardInterrupt:
pass
return 0
def inputhook_glut():
"""Run the pyglet event loop by processing pending events only.
This keeps processing pending events until stdin is ready. After
processing all pending events, a call to time.sleep is inserted. This is
needed, otherwise, CPU usage is at 100%. This sleep time should be tuned
though for best performance.
"""
# We need to protect against a user pressing Control-C when IPython is
# idle and this is running. We trap KeyboardInterrupt and pass.
signal.signal(signal.SIGINT, glut_int_handler)
try:
t = clock()
# Make sure the default window is set after a window has been closed
if glut.glutGetWindow() == 0:
glut.glutSetWindow(1)
glutMainLoopEvent()
return 0
while not stdin_ready():
glutMainLoopEvent()
# We need to sleep at this point to keep the idle CPU load
# low. However, if sleep to long, GUI response is poor. As
# a compromise, we watch how often GUI events are being processed
# and switch between a short and long sleep time. Here are some
# stats useful in helping to tune this.
# time CPU load
# 0.001 13%
# 0.005 3%
# 0.01 1.5%
# 0.05 0.5%
used_time = clock() - t
if used_time > 10.0:
# print 'Sleep for 1 s' # dbg
time.sleep(1.0)
elif used_time > 0.1:
# Few GUI events coming in, so we can sleep longer
# print 'Sleep for 0.05 s' # dbg
time.sleep(0.05)
else:
# Many GUI events coming in, so sleep only very little
time.sleep(0.001)
except KeyboardInterrupt:
pass
return 0
def inputhook_pyglet():
"""Run the pyglet event loop by processing pending events only.
This keeps processing pending events until stdin is ready. After
processing all pending events, a call to time.sleep is inserted. This is
needed, otherwise, CPU usage is at 100%. This sleep time should be tuned
though for best performance.
"""
# We need to protect against a user pressing Control-C when IPython is
# idle and this is running. We trap KeyboardInterrupt and pass.
try:
t = clock()
while not stdin_ready():
pyglet.clock.tick()
for window in pyglet.app.windows:
window.switch_to()
window.dispatch_events()
window.dispatch_event('on_draw')
flip(window)
# We need to sleep at this point to keep the idle CPU load
# low. However, if sleep to long, GUI response is poor. As
# a compromise, we watch how often GUI events are being processed
# and switch between a short and long sleep time. Here are some
# stats useful in helping to tune this.
# time CPU load
# 0.001 13%
# 0.005 3%
# 0.01 1.5%
# 0.05 0.5%
used_time = clock() - t
if used_time > 10.0:
# print 'Sleep for 1 s' # dbg
time.sleep(1.0)
elif used_time > 0.1:
# Few GUI events coming in, so we can sleep longer
# print 'Sleep for 0.05 s' # dbg
time.sleep(0.05)
else:
# Many GUI events coming in, so sleep only very little
time.sleep(0.001)
except KeyboardInterrupt:
pass
return 0
def inputhook_pyglet():
"""Run the pyglet event loop by processing pending events only.
This keeps processing pending events until stdin is ready. After
processing all pending events, a call to time.sleep is inserted. This is
needed, otherwise, CPU usage is at 100%. This sleep time should be tuned
though for best performance.
"""
# We need to protect against a user pressing Control-C when IPython is
# idle and this is running. We trap KeyboardInterrupt and pass.
try:
t = clock()
while not stdin_ready():
pyglet.clock.tick()
for window in pyglet.app.windows:
window.switch_to()
window.dispatch_events()
window.dispatch_event('on_draw')
flip(window)
# We need to sleep at this point to keep the idle CPU load
# low. However, if sleep to long, GUI response is poor. As
# a compromise, we watch how often GUI events are being processed
# and switch between a short and long sleep time. Here are some
# stats useful in helping to tune this.
# time CPU load
# 0.001 13%
# 0.005 3%
# 0.01 1.5%
# 0.05 0.5%
used_time = clock() - t
if used_time > 10.0:
# print 'Sleep for 1 s' # dbg
time.sleep(1.0)
elif used_time > 0.1:
# Few GUI events coming in, so we can sleep longer
# print 'Sleep for 0.05 s' # dbg
time.sleep(0.05)
else:
# Many GUI events coming in, so sleep only very little
time.sleep(0.001)
except KeyboardInterrupt:
pass
return 0
log.Clear()
self.socket.close()
self.ended = True
sys.exit(0) # connection broken
except SystemExit:
raise
# No need to log SystemExit error
except:
s = StringIO.StringIO()
exc_info = sys.exc_info()
traceback.print_exception(exc_info[0], exc_info[1], exc_info[2], limit=None, file=s)
err = s.getvalue()
dbg(SERVER_NAME + ' received error: ' + str(err), ERROR)
raise
if __name__ == '__main__':
port = int(sys.argv[1]) # this is from where we want to receive messages.
t = T(port)
dbg(SERVER_NAME + ' will start', INFO1)
t.start()
time.sleep(5)
t.join()
