(15, 30, ORANGE),
(31, 52, AMBER),
(53, 72, YELLOW),
(77, 96, GREEN),
(98, 119, TEAL),
(120, 145, BLUE),
(150, 173, PURPLE),
(180, 200, MAGENTA),
)
# Cap touch board setup ------------------------------------------------------
i2c = busio.I2C(board.SCL, board.SDA)
mpr121 = adafruit_mpr121.MPR121(i2c)
# Demo MODE LED Animations ------------------------------------------------------
rainbow = Rainbow(pixels, speed=0, period=10, name="rainbow", step=1)
rainbow_chase = RainbowChase(pixels, speed=0, size=5, spacing=10)
chase = Chase(pixels, speed=0.1, color=RED, size=1, spacing=6)
rainbow_comet = RainbowComet(pixels, speed=0.01, tail_length=60, bounce=True)
# Animation Sequence Playlist -- rearrange to change the order of animations
animations = AnimationSequence(
rainbow_chase,
chase,
rainbow_comet,
auto_clear=True,
auto_reset=True,
)
def go_dark():
84, 85, 86, 87, 88, 89, 90, 91
], individual_pixels=True)
# Rings Only
PIXEL_MAP_RINGS = PixelMap(PIXELS, [
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44,
45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65,
66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83
], individual_pixels=True)
# LED ANIMATIONS -----------------------------------------------------------
RAINBOW = Rainbow(PIXEL_MAP_RINGS, speed=0.01, period=10, step=3)
CP_RAINBOW = Rainbow(cp.pixels, speed=0.01, period=10, step=3)
CRYSTAL_COMET = Comet(PIXEL_MAP_CRYSTALS, speed=SPEED, tail_length=8,
color=PURPLE, bounce=True)
DARK_RINGS = Solid(PIXELS, color=BLACK)
DARK_CPB = Solid(cp.pixels, color=BLACK)
DARK = AnimationGroup(
DARK_RINGS,
DARK_CPB,
)
# Animations Playlist, reorder as desired. AnimationGroups play at same time
ANIMATIONS = AnimationSequence(
AnimationGroup(
CRYSTAL_COMET,
RAINBOW,
pixels.show()
time.sleep(0.02)
pixels.fill(BLACK)
pixels.show()
time.sleep(0.005)
pixels.fill(TILT_COLOR)
pixels.show()
time.sleep(0.01)
pixels.fill(BLACK)
pixels.show()
time.sleep(0.03)
# Cusomize LED Animations ------------------------------------------------------
powerup = RainbowComet(pixel_map[3], speed=0, tail_length=25, bounce=False)
rainbow = Rainbow(pixel_map[4], speed=0, period=6, name="rainbow", step=2.4)
rainbow_chase = RainbowChase(pixel_map[3],
speed=0,
size=3,
spacing=15,
step=10)
rainbow_chase2 = RainbowChase(pixel_map[2],
speed=0,
size=10,
spacing=1,
step=18)
chase = Chase(pixel_map[1], speed=0.1, color=RED, size=1, spacing=6)
rainbow_comet = RainbowComet(pixel_map[2],
speed=0,
tail_length=80,
bounce=True)
# Update to match the number of NeoPixels you have connected
pixel_num = 32
pixels = neopixel.NeoPixel(pixel_pin,
pixel_num,
brightness=0.5,
auto_write=False)
blink = Blink(pixels, speed=0.5, color=JADE)
colorcycle = ColorCycle(pixels, speed=0.4, colors=[MAGENTA, ORANGE])
comet = Comet(pixels, speed=0.01, color=PURPLE, tail_length=10, bounce=True)
chase = Chase(pixels, speed=0.1, size=3, spacing=6, color=WHITE)
pulse = Pulse(pixels, speed=0.1, period=3, color=AMBER)
sparkle = Sparkle(pixels, speed=0.1, color=PURPLE, num_sparkles=10)
solid = Solid(pixels, color=JADE)
rainbow = Rainbow(pixels, speed=0.1, period=2)
sparkle_pulse = SparklePulse(pixels, speed=0.1, period=3, color=JADE)
rainbow_comet = RainbowComet(pixels, speed=0.1, tail_length=7, bounce=True)
rainbow_chase = RainbowChase(pixels, speed=0.1, size=3, spacing=2, step=8)
rainbow_sparkle = RainbowSparkle(pixels, speed=0.1, num_sparkles=15)
custom_color_chase = CustomColorChase(pixels,
speed=0.1,
size=2,
spacing=3,
colors=[ORANGE, WHITE, JADE])
animations = AnimationSequence(
comet,
blink,
rainbow_sparkle,
chase,
def switch_colors(anim):
anim.color = colorwheel(random.randint(0, 255))
comet = Comet(pixels,
speed=0.03,
color=(0, 255, 255),
tail_length=6,
bounce=False)
comet1 = Comet(pixels,
speed=0.05,
color=(255, 255, 0),
tail_length=6,
bounce=True)
rainbow = Rainbow(pixels, speed=0.1, period=2, step=10)
animations = AnimationSequence(comet, comet1, rainbow, advance_interval=6)
comet.add_cycle_complete_receiver(switch_colors)
comet.notify_cycles = 2
ble = BLERadio()
uart_service = UARTService()
advertisement = ProvideServicesAdvertisement(uart_service)
while True:
#advertise when not connected
ble.start_advertising(advertisement)
while not ble.connected:
animations.animate()
ble.stop_advertising()
current_speed = 4
# Set your number of pixels here
pixel_num = 20
pixel_pin = board.A1
pixels = neopixel.NeoPixel(pixel_pin,
pixel_num,
brightness=1,
auto_write=False)
# Animation Setup
rainbow = Rainbow(pixels,
speed=speeds[current_speed],
period=2,
name="rainbow",
step=3)
sparkle = Sparkle(pixels,
speed=speeds[current_speed],
color=WHITE,
name="sparkle")
rainbowfade = RainbowFade(pixels,
speed=speeds[current_speed],
name="rainbowfade")
solid = Solid(pixels, color=colorwheel(0), name="solid")
# Animation Sequence Playlist -- rearrange to change the order of animations
animations = AnimationSequence(
rainbow,
#Setup NeoPixels
pixel_pin = board.D6
pixel_num = 16
pixels = neopixel.NeoPixel(pixel_pin,
pixel_num,
brightness=.9,
auto_write=False)
#Setup NeoPixel Grid
pixel_wing_vertical = helper.PixelMap.vertical_lines(
pixels, 8, 2, helper.horizontal_strip_gridmap(8, alternating=True))
pixel_wing_horizontal = helper.PixelMap.horizontal_lines(
pixels, 8, 2, helper.horizontal_strip_gridmap(8, alternating=True))
#Setup LED Animations
rainbow = Rainbow(pixels, speed=.001, period=2)
pulse = Pulse(pixels, speed=0.1, color=RED, period=3)
blink = Blink(pixels, speed=0.5, color=RED)
colorcycle = ColorCycle(pixels,
speed=0.4,
colors=[RED, ORANGE, YELLOW, JADE, BLUE, AQUA, PURPLE])
comet_v = Comet(pixel_wing_vertical,
speed=0.05,
color=PURPLE,
tail_length=6,
bounce=True)
#Setup the LED Sequences
animations = AnimationSequence(
rainbow,
pulse,
pixel_num = 9
pixels = neopixel.NeoPixel(pixel_pin, pixel_num, brightness=0.3, auto_write=False)
# variable for number of pixels in the pixelmap helper
num = 1
# pixel map helper
# allows you to light each candle up one by one
# begins with one being lit (num)
candles = helper.PixelMap.horizontal_lines(
pixels, num, 1, helper.horizontal_strip_gridmap(pixel_num, alternating=False)
)
# rainbow animation
rainbow = Rainbow(candles, speed=0.1, period=5)
animations = AnimationSequence(rainbow)
# turn on center candle
pixels[4] = AMBER
pixels.show()
while True:
# if only one candle is lit, don't rewrite center neopixel
if num == 1:
pass
# otherwise write data to center neopixel
else:
pixels[4] = AMBER
def draw(self): # draw the animation
''' fades the entire strip through the whole spectrum '''
self.color = colorwheel(self._color_index + 1)
self._color_index = (self._color_index + 1) % 256
self.fill(self.color)
# ANIMATION DEFINITIONS --
# create as many animations as you'd like and define their attributes here.
# They can be a single line or a group of animations - the groups will play
# at the same time, overlaid on top of each other.
readingLight = Solid(pixels, color=0xFF7D13) #warm white color HEX code
brightWhite = Solid(pixels, color=(150, 150, 150))
rainbow = Rainbow(pixels, speed=0.1, period=10, step=0.5)
rainbowfade = RainbowFade(pixels, speed=0.4, name="rainbowfade")
powerup = RainbowComet(pixels, speed=0, tail_length=50, bounce=False)
off = Solid(pixels, color=BLACK)
#startup animation will play just once
startup = AnimateOnce(powerup)
#starrynight and fire are animation groups with layered effects.
starrynight = AnimationGroup(
SparklePulse(pixels, speed=0.01, color=(0, 0, 150), period=1),
Comet(pixels, speed=0, tail_length=8, color=(150, 150, 150), bounce=False),
)
fire = AnimationGroup(
Comet(pixels, speed=0, tail_length=1, color=BLACK),
# 114 colors is the minimum value for all the rainbow animations. 128 use same memory.
rect1 = anisha.Arect(16, 1, 30, 30, outline=0x004000, stroke=2, colors=128)
group = displayio.Group()
group.append(rect1)
display.show(group)
blink = Blink(rect1, speed=0.5, color=JADE)
colorcycle = ColorCycle(rect1, speed=0.4, colors=[MAGENTA, ORANGE])
comet = Comet(rect1, speed=0.01, color=PURPLE, tail_length=10, bounce=True)
chase = Chase(rect1, speed=0.1, size=3, spacing=6, color=WHITE)
pulse = Pulse(rect1, speed=0.1, period=3, color=AMBER)
sparkle = Sparkle(rect1, speed=0.1, color=PURPLE, num_sparkles=10)
solid = Solid(rect1, color=JADE)
rainbow = Rainbow(rect1, speed=0.1, period=2)
sparkle_pulse = SparklePulse(rect1, speed=0.1, period=3, color=JADE)
rainbow_comet = RainbowComet(rect1, speed=0.1, tail_length=7, bounce=True)
rainbow_chase = RainbowChase(rect1, speed=0.1, size=3, spacing=2, step=8)
rainbow_sparkle = RainbowSparkle(rect1, speed=0.1, num_sparkles=15)
custom_color_chase = CustomColorChase(rect1,
speed=0.1,
size=2,
spacing=3,
colors=[ORANGE, WHITE, JADE])
animations = AnimationSequence(
comet,
blink,
rainbow_sparkle,
chase,
import board
import neopixel
from adafruit_led_animation.animation.pulse import Pulse
from adafruit_led_animation.animation.rainbow import Rainbow
from adafruit_led_animation.animation.rainbowsparkle import RainbowSparkle
from adafruit_led_animation.animation.rainbowcomet import RainbowComet
from adafruit_led_animation.sequence import AnimationSequence
from adafruit_led_animation.color import PURPLE
# Update this to match the number of NeoPixel LEDs connected to your board.
num_pixels = 124
pixels = neopixel.NeoPixel(board.GP1, num_pixels, auto_write=True)
pixels.brightness = 0.2
rainbow = Rainbow(pixels, speed=0.01, period=1)
rainbow_sparkle = RainbowSparkle(pixels, speed=0.05, num_sparkles=15)
rainbow_comet = RainbowComet(pixels, speed=.01, tail_length=20, bounce=True)
pulse = Pulse(pixels, speed=.05, color=PURPLE, period=3)
animations = AnimationSequence(pulse,
rainbow_sparkle,
rainbow_comet,
rainbow,
advance_interval=5,
auto_clear=True,
random_order=False)
while True:
animations.animate()
bounce=True)
chase_h = Chase(pixel_wing_horizontal,
speed=0.1,
size=3,
spacing=6,
color=JADE)
rainbow_chase_v = RainbowChase(pixel_wing_vertical,
speed=0.1,
size=3,
spacing=2,
step=8)
rainbow_comet_v = RainbowComet(pixel_wing_vertical,
speed=0.1,
tail_length=7,
bounce=True)
rainbow_v = Rainbow(pixel_wing_vertical, speed=0.1, period=2)
rainbow_chase_h = RainbowChase(pixel_wing_horizontal,
speed=0.1,
size=3,
spacing=3)
animations = AnimationSequence(
rainbow_v,
comet_h,
rainbow_comet_v,
chase_h,
rainbow_chase_v,
comet_v,
rainbow_chase_h,
advance_interval=5,
)