def write_bva(self, f):
f.write(BVAFILEMAGIC)
filesize_offset = f.tell()
f.write(b"ABCD") # Placeholder for file size
write_uint32(f, 1) # Always a section count of 1
f.write(b"\xFF" * 16)
vaf1_start = f.tell()
f.write(b"VAF1")
vaf1_size_offset = f.tell()
f.write(b"EFGH") # Placeholder for vaf1 size
write_uint8(f, self.loop_mode)
write_uint8(f, 0xFF)
write_uint16(f, self.duration)
write_uint16(f, len(self.animations))
count_offset = f.tell()
f.write(b"AB" * 1) # Placeholder for table count
data_offsets = f.tell()
f.write(b"ABCD" * 2) # Placeholder for data offsets
write_padding(f, multiple=32)
assert f.tell() == 0x40
# now, time for the visiblity animations to be written as placeholders
anim_start = f.tell()
f.write(b"\x00" * (0x4 * len(self.animations)))
write_padding(f, multiple=4)
table_offset = f.tell()
# write the table
all_frames = []
for anim in self.animations:
print(anim.frames)
offset = j3d.find_sequence(all_frames, anim.frames)
if offset == -1:
offset = len(all_frames)
all_frames.extend(anim.frames)
anim._set_offset(offset)
for val in all_frames:
j3d.write_uint8(f, int(val))
j3d.write_padding(f, 4)
write_padding(f, multiple=32)
total_size = f.tell()
f.seek(anim_start)
for anim in self.animations:
write_uint16(f, len(anim.frames))
write_uint16(f, anim._offset)
# Fill in all the placeholder values
f.seek(count_offset)
write_uint16(f, len(all_frames))
f.seek(filesize_offset)
write_uint32(f, total_size)
f.seek(vaf1_size_offset)
write_uint32(f, total_size - vaf1_start)
f.seek(data_offsets)
write_uint32(f, anim_start - vaf1_start)
write_uint32(f, table_offset - vaf1_start)
def write_bla(self, f):
f.write(BLAFILEMAGIC)
filesize_offset = f.tell()
f.write(b"ABCD") # Placeholder for file size
j3d.write_uint32(f, 1) # Always a section count of 1
f.write(b"\xFF" * 16)
clf1_start = f.tell()
f.write(b"CLF1")
clf1_size_offset = f.tell()
f.write(b"EFGH") # Placeholder for clf1 size
j3d.write_uint8(f, self.loop_mode)
j3d.write_sint8(f, self.anglescale)
j3d.write_uint16(f, self.duration)
#0x30
count_offset = f.tell()
f.write(b"toad") # Placeholder for cluster and scale counts
data_offsets = f.tell()
f.write(b"toadette") #placeholder for offsets
write_padding(f, multiple=32)
cluster_anim_start = f.tell()
f.write(b"\x00" * (0x4 * len(self.animations))) #placeholder for stuff
write_padding(f, multiple=32)
all_scales = []
for anim in self.animations:
if len(anim.seq) == 1:
sequence = [anim.seq[0].value]
else:
sequence = []
for comp in anim.seq:
sequence.append(comp.value)
offset = j3d.find_sequence(all_scales, sequence)
if offset == -1:
offset = len(all_scales)
all_scales.extend(sequence)
anim.scale_offset = offset
scale_start = f.tell()
for val in all_scales:
write_float(f, val)
j3d.write_padding(f, 32)
total_size = f.tell()
f.seek(cluster_anim_start)
for anim in self.animations:
j3d.write_uint16(f,
len(anim.seq)) # Scale count for this animation
j3d.write_uint16(f, anim.scale_offset)
# Fill in all the placeholder values
f.seek(filesize_offset)
j3d.write_uint32(f, total_size)
f.seek(clf1_size_offset)
j3d.write_uint32(f, total_size - clf1_start)
f.seek(count_offset)
j3d.write_uint16(f, 1)
j3d.write_uint16(f, len(all_scales))
# Next come the section offsets
j3d.write_uint32(f, cluster_anim_start - clf1_start)
j3d.write_uint32(f, scale_start - clf1_start)
def write_btk(self, f):
f.write(BTKFILEMAGIC)
filesize_offset = f.tell()
f.write(b"ABCD") # Placeholder for file size
j3d.write_uint32(f, 1) # Always a section count of 1
f.write(b"SVR1" + b"\xFF" * 12)
ttk1_start = f.tell()
f.write(b"TTK1")
ttk1_size_offset = f.tell()
f.write(b"EFGH") # Placeholder for ttk1 size
j3d.write_uint8(f, self.loop_mode)
j3d.write_sint8(f, self.anglescale)
rotscale = (2.0**self.anglescale) * (180.0 / 32768.0)
j3d.write_uint16(f, self.duration)
j3d.write_uint16(f,
len(self.animations) *
3) # Three times the matrix animations
count_offset = f.tell()
f.write(
b"1+1=11") # Placeholder for scale, rotation and translation count
data_offsets = f.tell()
f.write(b"--OnceUponATimeInALandFarAway---")
f.write(b"\x00" * (0x7C - f.tell()))
j3d.write_uint32(f, self.unknown_address)
matrix_anim_start = f.tell()
f.write(b"\x00" * (0x36 * len(self.animations)))
write_padding(f, multiple=4)
index_start = f.tell()
for i in range(len(self.animations)):
j3d.write_uint16(f, i)
j3d.write_padding(f, multiple=4)
stringtable = j3d.StringTable()
for anim in self.animations:
stringtable.strings.append(anim.name)
stringtable_start = f.tell()
stringtable.write(f, stringtable.strings)
j3d.write_padding(f, multiple=4)
matindex_start = f.tell()
for anim in self.animations:
j3d.write_uint8(f, anim.matindex)
j3d.write_padding(f, multiple=4)
center_start = f.tell()
for anim in self.animations:
for val in anim.center:
write_float(f, val)
j3d.write_padding(f, multiple=4)
all_scales = []
all_rotations = []
all_translations = []
for anim in self.animations:
for axis in "UVW":
# Set up offset for scale
if len(anim.scale[axis]) == 1:
sequence = [anim.scale[axis][0].value]
else:
sequence = []
for comp in anim.scale[axis]:
sequence.append(comp.time)
sequence.append(comp.value)
sequence.append(comp.tangentIn)
if self.tan_type == 1:
sequence.append(comp.tangentOut)
offset = j3d.find_sequence(all_scales, sequence)
if offset == -1:
offset = len(all_scales)
all_scales.extend(sequence)
anim._set_scale_offsets(axis, offset)
# Set up offset for rotation
if len(anim.rotation[axis]) == 1:
comp = anim.rotation[axis][0]
#angle = ((comp.value+180) % 360) - 180
sequence = [comp.value / rotscale]
#print("seq", sequence)
else:
sequence = []
for comp in anim.rotation[axis]:
#angle = ((comp.value+180) % 360) - 180
sequence.append(comp.time)
sequence.append(comp.value / rotscale)
sequence.append(comp.tangentIn / rotscale)
if self.tan_type == 1:
sequence.append(comp.tangentOut / rotscale)
#print("seq", sequence)
offset = j3d.find_sequence(all_rotations, sequence)
if offset == -1:
offset = len(all_rotations)
all_rotations.extend(sequence)
anim._set_rot_offsets(axis, offset)
"""for comp in anim.rotation[axis]:
all_rotations.append(comp.frame)
all_rotations.append(comp.value/rotscale)
all_rotations.append(comp.tangentIn/rotscale)
all_rotations.append(comp.tangentOut/rotscale)
"""
# Set up offset for translation
if len(anim.translation[axis]) == 1:
sequence = [anim.translation[axis][0].value]
else:
sequence = []
for comp in anim.translation[axis]:
sequence.append(comp.time)
sequence.append(comp.value)
sequence.append(comp.tangentIn)
if self.tan_type == 1:
sequence.append(comp.tangentOut)
offset = j3d.find_sequence(all_translations, sequence)
if offset == -1:
offset = len(all_translations)
all_translations.extend(sequence)
anim._set_translation_offsets(axis, offset)
"""offset = len(all_translations)
for comp in anim.translation[axis]:
all_translations.append(comp.frame)
all_translations.append(comp.value)
all_translations.append(comp.tangentIn)
all_translations.append(comp.tangentOut)"""
scale_start = f.tell()
for val in all_scales:
write_float(f, val)
j3d.write_padding(f, 4)
rotations_start = f.tell()
for val in all_rotations:
val = int(val)
if val <= -32767:
val = -32767
elif val > 32767:
val = 32767
"""angle = ((val+180) % 360) - 180 # Force the angle between -180 and 180 degrees
print(val, "becomes", angle)
if angle >= 0:
angle = (angle/180.0)*(2**15-1)
else:
angle = (angle/180.0)*(2**15)"""
j3d.write_sint16(f, int(val))
j3d.write_padding(f, 4)
translations_start = f.tell()
for val in all_translations:
#print(val)
write_float(f, val)
j3d.write_padding(f, 32)
total_size = f.tell()
f.seek(matrix_anim_start)
for anim in self.animations:
for axis in "UVW":
j3d.write_uint16(f, len(
anim.scale[axis])) # Scale count for this animation
j3d.write_uint16(
f, anim._scale_offsets[axis]) # Offset into scales
j3d.write_uint16(
f, self.tan_type
) # Tangent type, 0 = only TangentIn; 1 = TangentIn and TangentOut
j3d.write_uint16(f, len(
anim.rotation[axis])) # Rotation count for this animation
j3d.write_uint16(
f, anim._rot_offsets[axis]) # Offset into rotations
j3d.write_uint16(
f, self.tan_type
) # Tangent type, 0 = only TangentIn; 1 = TangentIn and TangentOut
j3d.write_uint16(f, len(anim.translation[axis])
) # Translation count for this animation
j3d.write_uint16(f, anim._translation_offsets[axis]
) # offset into translations
j3d.write_uint16(
f, self.tan_type
) # Tangent type, 0 = only TangentIn; 1 = TangentIn and TangentOut
# Fill in all the placeholder values
f.seek(filesize_offset)
j3d.write_uint32(f, total_size)
f.seek(ttk1_size_offset)
j3d.write_uint32(f, total_size - ttk1_start)
f.seek(count_offset)
j3d.write_uint16(f, len(all_scales))
j3d.write_uint16(f, len(all_rotations))
j3d.write_uint16(f, len(all_translations))
# Next come the section offsets
j3d.write_uint32(f, matrix_anim_start - ttk1_start)
j3d.write_uint32(f, index_start - ttk1_start)
j3d.write_uint32(f, stringtable_start - ttk1_start)
j3d.write_uint32(f, matindex_start - ttk1_start)
j3d.write_uint32(f, center_start - ttk1_start)
j3d.write_uint32(f, scale_start - ttk1_start)
j3d.write_uint32(f, rotations_start - ttk1_start)
j3d.write_uint32(f, translations_start - ttk1_start)
def write_bck(self, f):
f.write(BCKFILEMAGIC)
filesize_offset = f.tell()
f.write(b"ABCD") # Placeholder for file size
j3d.write_uint32(f, 1) # Always a section count of 1
f.write(b"\xFF"*16)
ank1_start = f.tell()
f.write(b"ANK1")
ttk1_size_offset = f.tell()
f.write(b"EFGH") # Placeholder for ttk1 size
j3d.write_uint8(f, self.loop_mode)
j3d.write_sint8(f, self.anglescale)
rotscale = (2.0**self.anglescale)*(180.0 / 32768.0)
j3d.write_uint16(f, self.duration)
j3d.write_uint16(f, len( self.animations ))
#0x30
count_offset = f.tell()
f.write(b"1+1=11") # Placeholder for scale, rotation and translation count
data_offsets = f.tell()
f.write(b"toadettebestgirl") #placeholder for offsets
write_padding(f, multiple=32)
bone_anim_start = f.tell()
f.write(b"\x00"*(0x36*len(self.animations))) #placeholder for stuff
write_padding(f, multiple=32)
all_scales = []
all_rotations = []
all_translations = []
for anim in self.animations:
for axis in "XYZ":
# Set up offset for scale
if len(anim.scale[axis]) == 1:
sequence = [anim.scale[axis][0].value]
else:
sequence = []
for comp in anim.scale[axis]:
sequence.append(comp.time)
sequence.append(comp.value)
sequence.append(comp.tangentIn)
if self.tan_type == 1 :
sequence.append(comp.tangentOut)
offset = j3d.find_sequence(all_scales,sequence)
if offset == -1:
offset = len(all_scales)
all_scales.extend(sequence)
anim._set_scale_offsets(axis, offset)
# Set up offset for rotation
if len(anim.rotation[axis]) == 1:
comp = anim.rotation[axis][0]
#angle = ((comp.value+180) % 360) - 180
sequence = [comp.value/rotscale]
#print("seq", sequence)
else:
sequence = []
for comp in anim.rotation[axis]:
#angle = ((comp.value+180) % 360) - 180
sequence.append(comp.time)
sequence.append(comp.value/rotscale)
sequence.append(comp.tangentIn/rotscale)
if self.tan_type == 1 :
sequence.append(comp.tangentOut/rotscale)
#print("seq", sequence)
offset = j3d.find_sequence(all_rotations, sequence)
if offset == -1:
offset = len(all_rotations)
all_rotations.extend(sequence)
anim._set_rot_offsets(axis, offset)
# Set up offset for translation
if len(anim.translation[axis]) == 1:
sequence = [anim.translation[axis][0].value]
else:
sequence = []
for comp in anim.translation[axis]:
sequence.append(comp.time)
sequence.append(comp.value)
sequence.append(comp.tangentIn)
if self.tan_type == 1 :
sequence.append(comp.tangentOut)
offset = j3d.find_sequence(all_translations, sequence)
if offset == -1:
offset = len(all_translations)
all_translations.extend(sequence)
anim._set_translation_offsets(axis, offset)
scale_start = f.tell()
for val in all_scales:
write_float(f, val)
j3d.write_padding(f, 32)
rotations_start = f.tell()
for val in all_rotations:
val = int(val)
if val <= -32767:
val = -32767
elif val > 32767:
val = 32767
#try:
j3d.write_sint16(f, val )
"""except:
print(val)"""
j3d.write_padding(f, 32)
translations_start = f.tell()
for val in all_translations:
#print(val)
write_float(f, val)
j3d.write_padding(f, 32)
total_size = f.tell()
f.seek(bone_anim_start)
for anim in self.animations:
for axis in "XYZ":
j3d.write_uint16(f, len(anim.scale[axis])) # Scale count for this animation
j3d.write_uint16(f, anim._scale_offsets[axis]) # Offset into scales
j3d.write_uint16(f, self.tan_type) # Tangent type, 0 = only TangentIn; 1 = TangentIn and TangentOut
j3d.write_uint16(f, len(anim.rotation[axis])) # Rotation count for this animation
j3d.write_uint16(f, anim._rot_offsets[axis]) # Offset into rotations
j3d.write_uint16(f, self.tan_type) # Tangent type, 0 = only TangentIn; 1 = TangentIn and TangentOut
j3d.write_uint16(f, len(anim.translation[axis])) # Translation count for this animation
j3d.write_uint16(f, anim._translation_offsets[axis])# offset into translations
j3d.write_uint16(f, self.tan_type) # Tangent type, 0 = only TangentIn; 1 = TangentIn and TangentOut
# Fill in all the placeholder values
f.seek(filesize_offset)
j3d.write_uint32(f, total_size)
f.seek(ttk1_size_offset)
j3d.write_uint32(f, total_size - ank1_start)
f.seek(count_offset)
j3d.write_uint16(f, len(all_scales))
j3d.write_uint16(f, len(all_rotations))
j3d.write_uint16(f, len(all_translations))
# Next come the section offsets
j3d.write_uint32(f, bone_anim_start - ank1_start)
j3d.write_uint32(f, scale_start - ank1_start)
j3d.write_uint32(f, rotations_start - ank1_start)
j3d.write_uint32(f, translations_start - ank1_start)
def write_btp(self, f):
#header info
f.write(j3d.BTPFILEMAGIC)
filesize_offset = f.tell()
f.write(b"ABCD") # Placeholder for file size
j3d.write_uint32(f, 1) # Always a section count of 1
f.write(b"\xFF"*16)
tpt1_start = f.tell()
f.write(b"TPT1")
tpt1_size_offset = f.tell()
f.write(b"EFGH") # Placeholder for tpt1 size
j3d.write_uint8(f, self.flag)
j3d.write_uint8(f, self.anglescale)
j3d.write_uint16(f, self.largest_duration)
j3d.write_uint16(f, len(self.animations) )
j3d.write_uint16(f, self.unknown_address)
tables_offset = f.tell();
f.write(b"toadettebestgril")
facial_animation_entries_os = f.tell()
f.write(b"\x00"*(0x8*len(self.animations))) #placeholder for stuff
"""
total_frames = 0;
for i in range( len (btp.animations) ):
j3d.write_uint16(f, len ( btp.animations[i].frames ))
j3d.write_uint16(f, total_frames)
total_frames += len (btp.animations[i].frames )
j3d.write_uint16(f, 0x00FF)
j3d.write_uint16(f, 0xFFFF)
"""
j3d.write_padding(f, 4)
texture_index_bank_os = f.tell()
all_frames = []
for anim in self.animations:
offset = j3d.find_sequence( all_frames, anim.frames )
if offset == -1:
offset = len(all_frames)
all_frames.extend(anim.frames)
anim._set_offset(offset)
for val in all_frames:
j3d.write_uint16(f, int(val) )
j3d.write_padding(f, 4)
"""
for i in range( len (btp.animations) ):
for j in btp.animations[i].frames:
j = int(j)
j3d.write_uint16(f, j)
"""
remap_table_os = f.tell()
j3d.write_uint32(f, 0x00000001)
stringtable_os = f.tell()
strings = self.get_children_names()
j3d.StringTable.write(f, strings)
j3d.write_padding(f, 32)
total_size = f.tell()
f.seek(filesize_offset)
j3d.write_uint32(f, total_size)
f.seek(tpt1_size_offset)
j3d.write_uint32(f, total_size - tpt1_start)
f.seek(facial_animation_entries_os);
for anim in self.animations:
j3d.write_uint16(f, len ( anim.frames ))
j3d.write_uint16(f, anim._offset)
j3d.write_uint16(f, 0x00FF)
j3d.write_uint16(f, 0xFFFF)
f.seek(tables_offset)
j3d.write_uint32(f, facial_animation_entries_os - tpt1_start)
j3d.write_uint32(f, texture_index_bank_os - tpt1_start)
j3d.write_uint32(f, remap_table_os - tpt1_start)
j3d.write_uint32(f, stringtable_os - tpt1_start)
