def set_values_NNeigh(self, name, filename):
""" Sets the values of the quantity 'name' at centroids,
from raster 'filename' using
a nearest neighbour interpolation. This extracts the exact
value of the raster at those coordinates and does not
interpolate the values.
Do not set at vertices or edges - not used in veg calculations
"""
# index = self.get_unique_vertices()
# volume_id = [i / 3 for i in index]
# vertex_id = [i % 3 for i in index]
#
# print volume_id
# print vertex_id
#
coord = self.domain.get_nodes(absolute=True)
# extract the data from the pts file
G_data = Geospatial_data(filename)
points = G_data.get_data_points(absolute=True)
z = G_data.get_attributes(attribute_name=None)
# create interpolator
interp = NearestNDInterpolator(points, z)
# set quantity at centroids
z = interp(coord)
z = z[num.newaxis, :].transpose()
# z_c = np.concatenate((coord, z), axis=1 )
self.domain.quantities[name].set_values_from_array(z, location="unique vertices")
def points_needed(seg, ll_lat, ll_long, grid_spacing,
lat_amount, long_amount, zone,
isSouthHemisphere):
"""
seg is two points, in UTM
return a list of the points, in lats and longs that are needed to
interpolate any point on the segment.
"""
from math import sqrt
geo_reference = Geo_reference(zone=zone)
geo = Geospatial_data(seg, geo_reference=geo_reference)
seg_lat_long = geo.get_data_points(as_lat_long=True,
isSouthHemisphere=isSouthHemisphere)
# 1.415 = 2^0.5, rounded up....
sqrt_2_rounded_up = 1.415
buffer = sqrt_2_rounded_up * grid_spacing
max_lat = max(seg_lat_long[0][0], seg_lat_long[1][0]) + buffer
max_long = max(seg_lat_long[0][1], seg_lat_long[1][1]) + buffer
min_lat = min(seg_lat_long[0][0], seg_lat_long[1][0]) - buffer
min_long = min(seg_lat_long[0][1], seg_lat_long[1][1]) - buffer
first_row = (min_long - ll_long) / grid_spacing
# To round up
first_row_long = int(round(first_row + 0.5))
last_row = (max_long - ll_long) / grid_spacing # round down
last_row_long = int(round(last_row))
first_row = (min_lat - ll_lat) / grid_spacing
# To round up
first_row_lat = int(round(first_row + 0.5))
last_row = (max_lat - ll_lat) / grid_spacing # round down
last_row_lat = int(round(last_row))
max_distance = 157147.4112 * grid_spacing
points_lat_long = []
# Create a list of the lat long points to include.
for index_lat in range(first_row_lat, last_row_lat + 1):
for index_long in range(first_row_long, last_row_long + 1):
lat = ll_lat + index_lat*grid_spacing
long = ll_long + index_long*grid_spacing
#filter here to keep good points
if keep_point(lat, long, seg, max_distance):
points_lat_long.append((lat, long)) #must be hashable
# Now that we have these points, lets throw ones out that are too far away
return points_lat_long
def points_needed(seg, ll_lat, ll_long, grid_spacing, lat_amount, long_amount,
zone, isSouthHemisphere):
"""
seg is two points, in UTM
return a list of the points, in lats and longs that are needed to
interpolate any point on the segment.
"""
from math import sqrt
geo_reference = Geo_reference(zone=zone)
geo = Geospatial_data(seg, geo_reference=geo_reference)
seg_lat_long = geo.get_data_points(as_lat_long=True,
isSouthHemisphere=isSouthHemisphere)
# 1.415 = 2^0.5, rounded up....
sqrt_2_rounded_up = 1.415
buffer = sqrt_2_rounded_up * grid_spacing
max_lat = max(seg_lat_long[0][0], seg_lat_long[1][0]) + buffer
max_long = max(seg_lat_long[0][1], seg_lat_long[1][1]) + buffer
min_lat = min(seg_lat_long[0][0], seg_lat_long[1][0]) - buffer
min_long = min(seg_lat_long[0][1], seg_lat_long[1][1]) - buffer
first_row = old_div((min_long - ll_long), grid_spacing)
# To round up
first_row_long = int(round(first_row + 0.5))
last_row = old_div((max_long - ll_long), grid_spacing) # round down
last_row_long = int(round(last_row))
first_row = old_div((min_lat - ll_lat), grid_spacing)
# To round up
first_row_lat = int(round(first_row + 0.5))
last_row = old_div((max_lat - ll_lat), grid_spacing) # round down
last_row_lat = int(round(last_row))
max_distance = 157147.4112 * grid_spacing
points_lat_long = []
# Create a list of the lat long points to include.
for index_lat in range(first_row_lat, last_row_lat + 1):
for index_long in range(first_row_long, last_row_long + 1):
lat = ll_lat + index_lat * grid_spacing
long = ll_long + index_long * grid_spacing
#filter here to keep good points
if keep_point(lat, long, seg, max_distance):
points_lat_long.append((lat, long)) #must be hashable
# Now that we have these points, lets throw ones out that are too far away
return points_lat_long
def test_calc_max_depth_and_momentum(self):
sww_file = "tid" # self.domain.get_name() + "." + self.domain.format
points_lat_long = [[-34, 151.5], [-35.5, 151.5], [-50, 151]]
spat = Geospatial_data(data_points=points_lat_long, points_are_lats_longs=True)
points_ab = spat.get_data_points(absolute=True)
deps, _ = calc_max_depth_and_momentum(sww_file, points_ab, verbose=self.verbose, use_cache=False)
# Test values based on returned results, so not an excellent test
assert num.allclose(deps[0], 0.113204555211)
assert num.allclose(deps[1], 11.3215)
assert num.allclose(deps[2], 0.0) # this value is outside both sww files
def alpha_shape_via_files(point_file, boundary_file, alpha=None):
"""
Load a point file and return the alpha shape boundary as a boundary file.
Inputs:
point_file: File location of the input file, points format (.csv or .pts)
boundary_file: File location of the generated output file
alpha: The alpha value can be optionally specified. If it is not specified
the optimum alpha value will be used.
"""
geospatial = Geospatial_data(point_file)
points = geospatial.get_data_points(absolute=False)
AS = Alpha_Shape(points, alpha)
AS.write_boundary(boundary_file)
def alpha_shape_via_files(point_file, boundary_file, alpha= None):
"""
Load a point file and return the alpha shape boundary as a boundary file.
Inputs:
point_file: File location of the input file, points format (.csv or .pts)
boundary_file: File location of the generated output file
alpha: The alpha value can be optionally specified. If it is not specified
the optimum alpha value will be used.
"""
geospatial = Geospatial_data(point_file)
points = geospatial.get_data_points(absolute=False)
AS = Alpha_Shape(points, alpha)
AS.write_boundary(boundary_file)
def test_calc_max_depth_and_momentum(self):
sww_file = "tid" # self.domain.get_name() + "." + self.domain.format
points_lat_long = [[-34, 151.5],[-35.5, 151.5],[-50, 151]]
spat = Geospatial_data(data_points=points_lat_long,
points_are_lats_longs=True)
points_ab = spat.get_data_points( absolute = True)
deps, _ = calc_max_depth_and_momentum(sww_file,
points_ab,
verbose=self.verbose,
use_cache = False)
# Test values based on returned results, so not an excellent test
assert num.allclose(deps[0],0.113204555211)
assert num.allclose(deps[1],11.3215)
assert num.allclose(deps[2],0.0) # this value is outside both sww files
def test_fit_to_mesh_UTM_file(self):
#Get (enough) datapoints
data_points = [[-21.5, 114.5], [-21.4, 114.6], [-21.45, 114.65],
[-21.35, 114.65], [-21.45, 114.55], [-21.45, 114.6]]
data_geo_spatial = Geospatial_data(data_points,
points_are_lats_longs=True)
points_UTM = data_geo_spatial.get_data_points(absolute=True)
attributes = linear_function(points_UTM)
att = 'elevation'
#Create .txt file
txt_file = tempfile.mktemp(".txt")
file = open(txt_file, "w")
file.write(" x,y," + att + " \n")
for data_point, attribute in zip(points_UTM, attributes):
row = str(data_point[0]) + ',' + str(data_point[1]) \
+ ',' + str(attribute)
#print "row", row
file.write(row + "\n")
file.close()
# setting up the mesh
a = [240000, 7620000]
b = [240000, 7680000]
c = [300000, 7620000]
points = [a, b, c]
elements = [[0, 2, 1]]
f = fit_to_mesh(txt_file,
points,
elements,
alpha=0.0,
max_read_lines=2)
answer = linear_function(points)
#print "f",f
#print "answer",answer
assert num.allclose(f, answer)
# Delete file!
os.remove(txt_file)
def test_fit_to_mesh_UTM_file(self):
#Get (enough) datapoints
data_points = [[-21.5, 114.5],[-21.4, 114.6],[-21.45,114.65],
[-21.35, 114.65],[-21.45, 114.55],[-21.45,114.6]]
data_geo_spatial = Geospatial_data(data_points,
points_are_lats_longs=True)
points_UTM = data_geo_spatial.get_data_points(absolute=True)
attributes = linear_function(points_UTM)
att = 'elevation'
#Create .txt file
txt_file = tempfile.mktemp(".txt")
file = open(txt_file,"w")
file.write(" x,y," + att + " \n")
for data_point, attribute in map(None, points_UTM, attributes):
row = str(data_point[0]) + ',' + str(data_point[1]) \
+ ',' + str(attribute)
#print "row", row
file.write(row + "\n")
file.close()
# setting up the mesh
a = [240000, 7620000]
b = [240000, 7680000]
c = [300000, 7620000]
points = [a, b, c]
elements = [[0,2,1]]
f = fit_to_mesh(txt_file, points, elements,
alpha=0.0, max_read_lines=2)
answer = linear_function(points)
#print "f",f
#print "answer",answer
assert num.allclose(f, answer)
# Delete file!
os.remove(txt_file)
def set_values_NNeigh(self, name, filename):
""" Sets the values of the quantity 'name' at centroids,
from raster 'filename' using
a nearest neighbour interpolation. This extracts the exact
value of the raster at those coordinates and does not
interpolate the values.
Do not set at vertices or edges - not used in veg calculations
"""
# index = self.get_unique_vertices()
# volume_id = [i / 3 for i in index]
# vertex_id = [i % 3 for i in index]
#
# print volume_id
# print vertex_id
#
coord = self.get_nodes(absolute=True)
# extract the data from the pts file
G_data = Geospatial_data(filename)
points = G_data.get_data_points(absolute=True)
z = G_data.get_attributes(attribute_name=None)
# create interpolator
interp = NearestNDInterpolator( points, z )
# set quantity at centroids
z = interp( coord )
z = z[np.newaxis, :].transpose()
# z_c = np.concatenate((coord, z), axis=1 )
self.quantities[name].set_values_from_array(z, location = 'unique vertices')
old_title_list = mesh_dict['vertex_attribute_titles'].tolist()
else:
old_title_list = mesh_dict['vertex_attribute_titles']
if verbose:
log.critical('tsh file %s loaded' % mesh_file)
# load in the points file
try:
geo = Geospatial_data(point_file, verbose=verbose)
except IOError, e:
if display_errors:
log.critical("Could not load bad file: %s" % str(e))
raise IOError #Re-raise exception
point_coordinates = geo.get_data_points(absolute=True)
title_list, point_attributes = concatinate_attributelist( \
geo.get_all_attributes())
if mesh_dict.has_key('geo_reference') and \
not mesh_dict['geo_reference'] is None:
mesh_origin = mesh_dict['geo_reference'].get_origin()
else:
mesh_origin = None
if verbose:
log.critical("points file loaded")
if verbose:
log.critical("fitting to mesh")
f = fit_to_mesh(point_coordinates,
vertex_coordinates,
def test_URS_points_northern_hemisphere(self):
LL_LAT = 8.0
LL_LONG = 97.0
GRID_SPACING = 2.0/60.0
LAT_AMOUNT = 2
LONG_AMOUNT = 2
ZONE = 47
#
points = []
for i in range(2):
for j in range(2):
points.append((degminsec2decimal_degrees(8,1+i*2,0),
degminsec2decimal_degrees(97,1+i*2,0)))
#print "points", points
geo_poly = Geospatial_data(data_points=points,
points_are_lats_longs=True)
poly_lat_long = geo_poly.get_data_points(as_lat_long=False,
isSouthHemisphere=False)
#print "seg_lat_long", poly_lat_long
# geo=URS_points_needed_to_file('test_example_poly3', poly_lat_long,
# ZONE,
# LL_LAT, LL_LONG,
# GRID_SPACING,
# LAT_AMOUNT, LONG_AMOUNT,
# isSouthernHemisphere=False,
# export_csv=True,
# verbose=self.verbose)
geo=calculate_boundary_points(poly_lat_long,
ZONE,
LL_LAT, LL_LONG,
GRID_SPACING,
LAT_AMOUNT, LONG_AMOUNT,
isSouthHemisphere=False,
verbose=self.verbose)
results = frozenset(geo.get_data_points(as_lat_long=True,
isSouthHemisphere=False))
#print 'results',results
# These are a set of points that have to be in results
points = []
for i in range(2):
for j in range(2):
points.append((degminsec2decimal_degrees(8,i*2,0),
degminsec2decimal_degrees(97,i*2,0)))
#print "answer points", points
answer = frozenset(points)
for point in points:
found = False
for result in results:
if num.allclose(point, result):
found = True
break
if not found:
assert False
def fit_to_mesh_file(mesh_file,
point_file,
mesh_output_file,
alpha=DEFAULT_ALPHA,
verbose=False,
expand_search=False,
precrop=False,
display_errors=True):
"""
Given a mesh file (tsh) and a point attribute file, fit
point attributes to the mesh and write a mesh file with the
results.
Note: the points file needs titles. If you want anuga to use the tsh file,
make sure the title is elevation.
NOTE: Throws IOErrors, for a variety of file problems.
"""
from anuga.load_mesh.loadASCII import import_mesh_file, \
export_mesh_file, concatinate_attributelist
try:
mesh_dict = import_mesh_file(mesh_file)
except IOError as e:
if display_errors:
log.critical("Could not load bad file: %s" % str(e))
raise IOError # Could not load bad mesh file.
vertex_coordinates = mesh_dict['vertices']
triangles = mesh_dict['triangles']
if isinstance(mesh_dict['vertex_attributes'], num.ndarray):
old_point_attributes = mesh_dict['vertex_attributes'].tolist()
else:
old_point_attributes = mesh_dict['vertex_attributes']
if isinstance(mesh_dict['vertex_attribute_titles'], num.ndarray):
old_title_list = mesh_dict['vertex_attribute_titles'].tolist()
else:
old_title_list = mesh_dict['vertex_attribute_titles']
if verbose:
log.critical('tsh file %s loaded' % mesh_file)
# load in the points file
try:
geo = Geospatial_data(point_file, verbose=verbose)
except IOError as e:
if display_errors:
log.critical("Could not load bad file: %s" % str(e))
raise IOError # Re-raise exception
point_coordinates = geo.get_data_points(absolute=True)
title_list, point_attributes = concatinate_attributelist(
geo.get_all_attributes())
if 'geo_reference' in mesh_dict and \
not mesh_dict['geo_reference'] is None:
mesh_origin = mesh_dict['geo_reference'].get_origin()
else:
mesh_origin = None
if verbose:
log.critical("points file loaded")
if verbose:
log.critical("fitting to mesh")
f = fit_to_mesh(point_coordinates,
vertex_coordinates,
triangles,
None,
point_attributes,
alpha=alpha,
verbose=verbose,
data_origin=None,
mesh_origin=mesh_origin)
if verbose:
log.critical("finished fitting to mesh")
# convert array to list of lists
new_point_attributes = f.tolist()
# FIXME have this overwrite attributes with the same title - DSG
# Put the newer attributes last
if old_title_list != []:
old_title_list.extend(title_list)
# FIXME can this be done a faster way? - DSG
for i in range(len(old_point_attributes)):
old_point_attributes[i].extend(new_point_attributes[i])
mesh_dict['vertex_attributes'] = old_point_attributes
mesh_dict['vertex_attribute_titles'] = old_title_list
else:
mesh_dict['vertex_attributes'] = new_point_attributes
mesh_dict['vertex_attribute_titles'] = title_list
if verbose:
log.critical("exporting to file %s" % mesh_output_file)
try:
export_mesh_file(mesh_output_file, mesh_dict)
except IOError as e:
if display_errors:
log.critical("Could not write file %s", str(e))
raise IOError
def setUp(self):
# print "****set up****"
# Create an sww file
# Set up an sww that has a geo ref.
# have it cover an area in Australia. 'gong maybe
# Don't have many triangles though!
# Site Name: GDA-MGA: (UTM with GRS80 ellipsoid)
# Zone: 56
# Easting: 222908.705 Northing: 6233785.284
# Latitude: -34 0 ' 0.00000 '' Longitude: 150 0 ' 0.00000 ''
# Grid Convergence: -1 40 ' 43.13 '' Point Scale: 1.00054660
# geo-ref
# Zone: 56
# Easting: 220000 Northing: 6230000
# have a big area covered.
mesh_file = tempfile.mktemp(".tsh")
points_lat_long = [[-33, 152], [-35, 152], [-35, 150], [-33, 150]]
spat = Geospatial_data(data_points=points_lat_long, points_are_lats_longs=True)
points_ab = spat.get_data_points(absolute=True)
geo = Geo_reference(56, 400000, 6000000)
spat.set_geo_reference(geo)
m = Mesh()
m.add_vertices(spat)
m.auto_segment()
m.generate_mesh(verbose=False)
m.export_mesh_file(mesh_file)
# Create shallow water domain
domain = Domain(mesh_file)
os.remove(mesh_file)
domain.default_order = 2
# Set some field values
# domain.set_quantity('stage', 1.0)
domain.set_quantity("elevation", -0.5)
domain.set_quantity("friction", 0.03)
######################
# Boundary conditions
B = Transmissive_boundary(domain)
domain.set_boundary({"exterior": B})
######################
# Initial condition - with jumps
bed = domain.quantities["elevation"].vertex_values
stage = num.zeros(bed.shape, num.float)
h = 0.3
for i in range(stage.shape[0]):
if i % 2 == 0:
stage[i, :] = bed[i, :] + h
else:
stage[i, :] = bed[i, :]
domain.set_quantity("stage", stage)
domain.set_quantity("xmomentum", stage * 22.0)
domain.set_quantity("ymomentum", stage * 55.0)
domain.distribute_to_vertices_and_edges()
self.domain = domain
C = domain.get_vertex_coordinates()
self.X = C[:, 0:6:2].copy()
self.Y = C[:, 1:6:2].copy()
self.F = bed
# sww_file = tempfile.mktemp("")
self.domain.set_name("tid_P0")
self.domain.format = "sww"
self.domain.smooth = True
self.domain.reduction = mean
sww = SWW_file(self.domain)
sww.store_connectivity()
sww.store_timestep()
self.domain.time = 2.0
sww.store_timestep()
self.sww = sww # so it can be deleted
# Create another sww file
mesh_file = tempfile.mktemp(".tsh")
points_lat_long = [[-35, 152], [-36, 152], [-36, 150], [-35, 150]]
spat = Geospatial_data(data_points=points_lat_long, points_are_lats_longs=True)
points_ab = spat.get_data_points(absolute=True)
geo = Geo_reference(56, 400000, 6000000)
spat.set_geo_reference(geo)
m = Mesh()
m.add_vertices(spat)
m.auto_segment()
m.generate_mesh(verbose=False)
m.export_mesh_file(mesh_file)
# Create shallow water domain
domain = Domain(mesh_file)
os.remove(mesh_file)
domain.default_order = 2
# Set some field values
# domain.set_quantity('stage', 1.0)
domain.set_quantity("elevation", -40)
domain.set_quantity("friction", 0.03)
######################
# Boundary conditions
B = Transmissive_boundary(domain)
domain.set_boundary({"exterior": B})
######################
# Initial condition - with jumps
bed = domain.quantities["elevation"].vertex_values
stage = num.zeros(bed.shape, num.float)
h = 30.0
for i in range(stage.shape[0]):
if i % 2 == 0:
stage[i, :] = bed[i, :] + h
else:
stage[i, :] = bed[i, :]
domain.set_quantity("stage", stage)
domain.set_quantity("xmomentum", stage * 22.0)
domain.set_quantity("ymomentum", stage * 55.0)
domain.distribute_to_vertices_and_edges()
self.domain2 = domain
C = domain.get_vertex_coordinates()
self.X2 = C[:, 0:6:2].copy()
self.Y2 = C[:, 1:6:2].copy()
self.F2 = bed
# sww_file = tempfile.mktemp("")
domain.set_name("tid_P1")
domain.format = "sww"
domain.smooth = True
domain.reduction = mean
sww = SWW_file(domain)
sww.store_connectivity()
sww.store_timestep()
domain.time = 2.0
sww.store_timestep()
self.swwII = sww # so it can be deleted
# print "sww.filename", sww.filename
# Create a csv file
self.csv_file = tempfile.mktemp(".csv")
fd = open(self.csv_file, "wb")
writer = csv.writer(fd)
writer.writerow(
["LONGITUDE", "LATITUDE", STR_VALUE_LABEL, CONT_VALUE_LABEL, "ROOF_TYPE", WALL_TYPE_LABEL, SHORE_DIST_LABEL]
)
writer.writerow(["151.5", "-34", "199770", "130000", "Metal", "Timber", 20.0])
writer.writerow(["151", "-34.5", "150000", "76000", "Metal", "Double Brick", 200.0])
writer.writerow(["151", "-34.25", "150000", "76000", "Metal", "Brick Veneer", 200.0])
fd.close()
# Create a csv file
self.csv_fileII = tempfile.mktemp(".csv")
fd = open(self.csv_fileII, "wb")
writer = csv.writer(fd)
writer.writerow(
["LONGITUDE", "LATITUDE", STR_VALUE_LABEL, CONT_VALUE_LABEL, "ROOF_TYPE", WALL_TYPE_LABEL, SHORE_DIST_LABEL]
)
writer.writerow(["151.5", "-34", "199770", "130000", "Metal", "Timber", 20.0])
writer.writerow(["151", "-34.5", "150000", "76000", "Metal", "Double Brick", 200.0])
writer.writerow(["151", "-34.25", "150000", "76000", "Metal", "Brick Veneer", 200.0])
fd.close()
old_title_list = mesh_dict['vertex_attribute_titles'].tolist()
else:
old_title_list = mesh_dict['vertex_attribute_titles']
if verbose:
log.critical('tsh file %s loaded' % mesh_file)
# load in the points file
try:
geo = Geospatial_data(point_file, verbose=verbose)
except IOError, e:
if display_errors:
log.critical("Could not load bad file: %s" % str(e))
raise IOError #Re-raise exception
point_coordinates = geo.get_data_points(absolute=True)
title_list, point_attributes = concatinate_attributelist( \
geo.get_all_attributes())
if mesh_dict.has_key('geo_reference') and \
not mesh_dict['geo_reference'] is None:
mesh_origin = mesh_dict['geo_reference'].get_origin()
else:
mesh_origin = None
if verbose:
log.critical("points file loaded")
if verbose:
log.critical("fitting to mesh")
f = fit_to_mesh(point_coordinates,
vertex_coordinates,
def setUp(self):
#print "****set up****"
# Create an sww file
# Set up an sww that has a geo ref.
# have it cover an area in Australia. 'gong maybe
#Don't have many triangles though!
#Site Name: GDA-MGA: (UTM with GRS80 ellipsoid)
#Zone: 56
#Easting: 222908.705 Northing: 6233785.284
#Latitude: -34 0 ' 0.00000 '' Longitude: 150 0 ' 0.00000 ''
#Grid Convergence: -1 40 ' 43.13 '' Point Scale: 1.00054660
#geo-ref
#Zone: 56
#Easting: 220000 Northing: 6230000
#have a big area covered.
mesh_file = tempfile.mktemp(".tsh")
points_lat_long = [[-33,152],[-35,152],[-35,150],[-33,150]]
spat = Geospatial_data(data_points=points_lat_long,
points_are_lats_longs=True)
points_ab = spat.get_data_points( absolute = True)
geo = Geo_reference(56,400000,6000000)
spat.set_geo_reference(geo)
m = Mesh()
m.add_vertices(spat)
m.auto_segment()
m.generate_mesh(verbose=False)
m.export_mesh_file(mesh_file)
#Create shallow water domain
domain = Domain(mesh_file)
os.remove(mesh_file)
domain.default_order=2
#Set some field values
#domain.set_quantity('stage', 1.0)
domain.set_quantity('elevation', -0.5)
domain.set_quantity('friction', 0.03)
######################
# Boundary conditions
B = Transmissive_boundary(domain)
domain.set_boundary( {'exterior': B})
######################
#Initial condition - with jumps
bed = domain.quantities['elevation'].vertex_values
stage = num.zeros(bed.shape, num.float)
h = 0.3
for i in range(stage.shape[0]):
if i % 2 == 0:
stage[i,:] = bed[i,:] + h
else:
stage[i,:] = bed[i,:]
domain.set_quantity('stage', stage)
domain.set_quantity('xmomentum', stage*22.0)
domain.set_quantity('ymomentum', stage*55.0)
domain.distribute_to_vertices_and_edges()
self.domain = domain
C = domain.get_vertex_coordinates()
self.X = C[:,0:6:2].copy()
self.Y = C[:,1:6:2].copy()
self.F = bed
#sww_file = tempfile.mktemp("")
self.domain.set_name('tid_P0')
self.domain.format = 'sww'
self.domain.smooth = True
self.domain.reduction = mean
sww = SWW_file(self.domain)
sww.store_connectivity()
sww.store_timestep()
self.domain.time = 2.
sww.store_timestep()
self.sww = sww # so it can be deleted
#Create another sww file
mesh_file = tempfile.mktemp(".tsh")
points_lat_long = [[-35,152],[-36,152],[-36,150],[-35,150]]
spat = Geospatial_data(data_points=points_lat_long,
points_are_lats_longs=True)
points_ab = spat.get_data_points( absolute = True)
geo = Geo_reference(56,400000,6000000)
spat.set_geo_reference(geo)
m = Mesh()
m.add_vertices(spat)
m.auto_segment()
m.generate_mesh(verbose=False)
m.export_mesh_file(mesh_file)
#Create shallow water domain
domain = Domain(mesh_file)
os.remove(mesh_file)
domain.default_order=2
#Set some field values
#domain.set_quantity('stage', 1.0)
domain.set_quantity('elevation', -40)
domain.set_quantity('friction', 0.03)
######################
# Boundary conditions
B = Transmissive_boundary(domain)
domain.set_boundary( {'exterior': B})
######################
#Initial condition - with jumps
bed = domain.quantities['elevation'].vertex_values
stage = num.zeros(bed.shape, num.float)
h = 30.
for i in range(stage.shape[0]):
if i % 2 == 0:
stage[i,:] = bed[i,:] + h
else:
stage[i,:] = bed[i,:]
domain.set_quantity('stage', stage)
domain.set_quantity('xmomentum', stage*22.0)
domain.set_quantity('ymomentum', stage*55.0)
domain.distribute_to_vertices_and_edges()
self.domain2 = domain
C = domain.get_vertex_coordinates()
self.X2 = C[:,0:6:2].copy()
self.Y2 = C[:,1:6:2].copy()
self.F2 = bed
#sww_file = tempfile.mktemp("")
domain.set_name('tid_P1')
domain.format = 'sww'
domain.smooth = True
domain.reduction = mean
sww = SWW_file(domain)
sww.store_connectivity()
sww.store_timestep()
domain.time = 2.
sww.store_timestep()
self.swwII = sww # so it can be deleted
# print "sww.filename", sww.filename
#Create a csv file
self.csv_file = tempfile.mktemp(".csv")
fd = open(self.csv_file,'wb')
writer = csv.writer(fd)
writer.writerow(['LONGITUDE','LATITUDE',STR_VALUE_LABEL,CONT_VALUE_LABEL,'ROOF_TYPE',WALL_TYPE_LABEL, SHORE_DIST_LABEL])
writer.writerow(['151.5','-34','199770','130000','Metal','Timber',20.])
writer.writerow(['151','-34.5','150000','76000','Metal','Double Brick',200.])
writer.writerow(['151','-34.25','150000','76000','Metal','Brick Veneer',200.])
fd.close()
#Create a csv file
self.csv_fileII = tempfile.mktemp(".csv")
fd = open(self.csv_fileII,'wb')
writer = csv.writer(fd)
writer.writerow(['LONGITUDE','LATITUDE',STR_VALUE_LABEL,CONT_VALUE_LABEL,'ROOF_TYPE',WALL_TYPE_LABEL, SHORE_DIST_LABEL])
writer.writerow(['151.5','-34','199770','130000','Metal','Timber',20.])
writer.writerow(['151','-34.5','150000','76000','Metal','Double Brick',200.])
writer.writerow(['151','-34.25','150000','76000','Metal','Brick Veneer',200.])
fd.close()
def test_URS_points_northern_hemisphere(self):
LL_LAT = 8.0
LL_LONG = 97.0
GRID_SPACING = 2.0 / 60.0
LAT_AMOUNT = 2
LONG_AMOUNT = 2
ZONE = 47
#
points = []
for i in range(2):
for j in range(2):
points.append((degminsec2decimal_degrees(8, 1 + i * 2, 0),
degminsec2decimal_degrees(97, 1 + i * 2, 0)))
#print "points", points
geo_poly = Geospatial_data(data_points=points,
points_are_lats_longs=True)
poly_lat_long = geo_poly.get_data_points(as_lat_long=False,
isSouthHemisphere=False)
#print "seg_lat_long", poly_lat_long
# geo=URS_points_needed_to_file('test_example_poly3', poly_lat_long,
# ZONE,
# LL_LAT, LL_LONG,
# GRID_SPACING,
# LAT_AMOUNT, LONG_AMOUNT,
# isSouthernHemisphere=False,
# export_csv=True,
# verbose=self.verbose)
geo = calculate_boundary_points(poly_lat_long,
ZONE,
LL_LAT,
LL_LONG,
GRID_SPACING,
LAT_AMOUNT,
LONG_AMOUNT,
isSouthHemisphere=False,
verbose=self.verbose)
results = frozenset(
geo.get_data_points(as_lat_long=True, isSouthHemisphere=False))
#print 'results',results
# These are a set of points that have to be in results
points = []
for i in range(2):
for j in range(2):
points.append((degminsec2decimal_degrees(8, i * 2, 0),
degminsec2decimal_degrees(97, i * 2, 0)))
#print "answer points", points
answer = frozenset(points)
for point in points:
found = False
for result in results:
if num.allclose(point, result):
found = True
break
if not found:
assert False