def __init__(self, lboxID, lboxName, script, M, N):
self.uniqueIDB58 = lboxID
self.shortName = lboxName
self.binScript = script
self.M = M
self.N = N
if getTxOutScriptType(script) == CPP_TXOUT_P2SH:
self.p2shScrAddr = script_to_scrAddr(self.binScript)
elif getTxOutScriptType(script) == CPP_TXOUT_MULTISIG:
self.p2shScrAddr = script_to_scrAddr(script_to_p2sh_script(self.binScript))
else:
raise BadAddressError('Must initialize [mocked] lbox with MS or P2SH')
def distributeBtc(masterWallet, amount, sendingAddrList):
pytx = None
setupTheBDM()
try:
recipValuePairs = []
utxoList = []
for sendingAddr in sendingAddrList:
addr160 = sendingAddr.getAddr160()
# Make sure the sending addresses are in the masterWallet
if not masterWallet.hasAddr(addr160):
raise WalletAddressError, 'Address is not in wallet! [%s]' % sendingAddr.getAddrStr()
utxoList.extend(masterWallet.getAddrTxOutList(addr160))
for importedAddr in masterWallet.getLinearAddrList():
if importedAddr.chainIndex<0:
recipValuePairs.append((importedAddr.getAddr160(),amount))
totalSpend = len(recipValuePairs)*amount
fee = calcMinSuggestedFees(utxoList, totalSpend, MIN_RELAY_TX_FEE, len(recipValuePairs))[1]
# Get the necessary utxo list
selectedUtxoList = PySelectCoins(utxoList, totalSpend, fee)
# get total value
totalAvailable = sum([u.getValue() for u in selectedUtxoList])
totalChange = totalAvailable - (totalSpend + fee)
# Make sure there are funds to cover the transaction.
if totalChange < 0:
print '***ERROR: you are trying to spend more than your balance!'
raise NegativeValueError
recipValuePairs.append((masterWallet.getNextUnusedAddress().getAddr160(), totalChange ))
# ACR: To support P2SH in general, had to change createFromTxOutSelection
# to take full scripts, not just hash160 values. Convert the list
# before passing it in
scrPairs = [[hash160_to_p2pkhash_script(r), v] for r,v in recipValuePairs]
# we're providing a key map for the inputs.
pubKeyMap = {}
for utxo in selectedUtxoList:
scrType = getTxOutScriptType(utxo.getScript())
if scrType in CPP_TXOUT_STDSINGLESIG:
scrAddr = utxo.getRecipientScrAddr()
a160 = scrAddr_to_hash160(scrAddr)[1]
addrObj = masterWallet.getAddrByHash160(a160)
if addrObj:
pubKeyMap[scrAddr] = addrObj.binPublicKey65.toBinStr()
ustx = UnsignedTransaction().createFromTxOutSelection(selectedUtxoList, scrPairs, pubKeyMap)
masterWallet.unlock(securePassphrase = SecureBinaryData(getpass('Enter your secret string:')))
# Sign and prepare the final transaction for broadcast
masterWallet.signUnsignedTx(ustx)
pytx = ustx.getPyTxSignedIfPossible()
print '\nSigned transaction to be broadcast using Armory "offline transactions"...'
print ustx.serializeAscii()
finally:
TheBDM.beginCleanShutdown()
return pytx
def distributeBtc(masterWallet, amount, sendingAddrList):
pytx = None
setupTheBDM()
try:
recipValuePairs = []
utxoList = []
for sendingAddr in sendingAddrList:
addr160 = sendingAddr.getAddr160()
# Make sure the sending addresses are in the masterWallet
if not masterWallet.hasAddr(addr160):
raise WalletAddressError, 'Address is not in wallet! [%s]' % sendingAddr.getAddrStr()
utxoList.extend(masterWallet.getAddrTxOutList(addr160))
for importedAddr in masterWallet.getLinearAddrList():
if importedAddr.chainIndex<0:
recipValuePairs.append((importedAddr.getAddr160(),amount))
totalSpend = len(recipValuePairs)*amount
fee = calcMinSuggestedFees(utxoList, totalSpend, MIN_RELAY_TX_FEE, len(recipValuePairs))
# Get the necessary utxo list
selectedUtxoList = PySelectCoins(utxoList, totalSpend, fee)
# get total value
totalAvailable = sum([u.getValue() for u in selectedUtxoList])
totalChange = totalAvailable - (totalSpend + fee)
# Make sure there are funds to cover the transaction.
if totalChange < 0:
print '***ERROR: you are trying to spend more than your balance!'
raise NegativeValueError
recipValuePairs.append((masterWallet.getNextUnusedAddress().getAddr160(), totalChange ))
# ACR: To support P2SH in general, had to change createFromTxOutSelection
# to take full scripts, not just hash160 values. Convert the list
# before passing it in
scrPairs = [[hash160_to_p2pkhash_script(r), v] for r,v in recipValuePairs]
# we're providing a key map for the inputs.
pubKeyMap = {}
for utxo in selectedUtxoList:
scrType = getTxOutScriptType(utxo.getScript())
if scrType in CPP_TXOUT_STDSINGLESIG:
scrAddr = utxo.getRecipientScrAddr()
a160 = scrAddr_to_hash160(scrAddr)[1]
addrObj = masterWallet.getAddrByHash160(a160)
if addrObj:
pubKeyMap[scrAddr] = addrObj.binPublicKey65.toBinStr()
ustx = UnsignedTransaction().createFromTxOutSelection(selectedUtxoList, scrPairs, pubKeyMap)
masterWallet.unlock(securePassphrase = SecureBinaryData(getpass('Enter your secret string:')))
# Sign and prepare the final transaction for broadcast
masterWallet.signUnsignedTx(ustx)
pytx = ustx.getPyTxSignedIfPossible()
print '\nSigned transaction to be broadcast using Armory "offline transactions"...'
print ustx.serializeAscii()
finally:
TheBDM.beginCleanShutdown()
return pytx
def getDisplayStringForScript(binScript, wltMap, lboxList, maxChars=256,
doBold=0, prefIDOverAddr=False,
lblTrunc=12, lastTrunc=12):
"""
NOTE: This was originally in ArmoryQt.py, but we really needed this to be
more widely accessible. And it's easier to test when this is in ArmoryUtils.
Yes, I realize that it's awkward that we have wltMap {WltID-->Wallet} but
we have a lboxList [Lbox0, Lbox1, ...]. I will have to standardize the
member names and lookup structures.
We have a script and want to show the user something useful about it.
We have a couple different display modes, since some formats are space-
constrained. For instance, the DlgConfirmSend dialog only has space
for 34 letters, as it was designed to be showing only an address string.
This is similar to self.getContribStr, but that method is more focused
on identifying participants of a multi-sig transaction. It almost
works here, but we need one that's more general.
Consider a 3-of-5 lockbox with ID Abcd1234z and label
"My long-term savings super-secure" and p2sh address 2m83zQr9981pmKnrSwa32
10 20 30 40 50 60 70
| | | | | | | |
256 Lockbox 3-of-5 "Long-term savings" (2m83zQr9981p...)
256 Lockbox 3-of-5 "Long-term savings" (Abcd1234z)
50 Lockbox 3-of-5 "Long-term sa..." (2m83zQr9981p...)
35 Lockbox 3-of-5 "Long-term savings"
32 Lockbox 3-of-5 "Long-term sa..."
256 Wallet "LabelLabelLabelLabelLabelLabel" (1j93CnrAA3xn...)
256 Wallet "LabelLabelLabelLabelLabelLabel" (Abcd1234z)
50 Wallet "LabelLabelLa..." (1j93CnrAA3xn...)
35 Wallet "LabelLabelLa..."
So we will always show the type and the label (possibly truncated). If
we can show the ID or Addr (whichever is preferred) we will do so, otherwise
it gets left out. If our truncation leaves the string too short, we
usually try to add back in a few chars. It's not perfect, but it seems to
work reliably.
The doBold arg indicates that we want to add html bold tags around the
first N parts of the return. This is applied after the length calculations
are performed, as bolding will have a very small impact on width
"""
if maxChars<32:
LOGERROR('getDisplayStringForScript() req at least 32 bytes output')
return None
scriptType = getTxOutScriptType(binScript)
scrAddr = script_to_scrAddr(binScript)
if scriptType != CPP_TXOUT_OPRETURN:
wlt = None
for iterID,iterWlt in wltMap.iteritems():
if iterWlt.hasScrAddr(scrAddr):
wlt = iterWlt
break
lbox = None
if wlt is None:
searchScrAddr = scrAddr
if scriptType==CPP_TXOUT_MULTISIG:
searchScrAddr = script_to_scrAddr(script_to_p2sh_script(binScript))
for iterLbox in lboxList:
if iterLbox.hasScrAddr(searchScrAddr):
lbox = iterLbox
break
else:
wlt = None
lbox = None
# Return these with the display string
wltID = wlt.uniqueIDB58 if wlt else None
lboxID = lbox.uniqueIDB58 if lbox else None
if wlt is not None:
strType = 'Wallet:'
strLabel = wlt.labelName
addrStr = None
if scriptType in CPP_TXOUT_HAS_ADDRSTR:
addrStr = scrAddr_to_addrStr(scrAddr)
strLast = wlt.uniqueIDB58 if addrStr is None else addrStr
strLast = wlt.uniqueIDB58 if prefIDOverAddr else strLast
elif lbox is not None:
strType = 'Lockbox %d-of-%d:' % (lbox.M, lbox.N)
strLabel = lbox.shortName
addrStr = scrAddr_to_addrStr(scrAddr)
strLast = lbox.uniqueIDB58 if prefIDOverAddr else addrStr
else:
strType = ''
strLabel = ''
strLast = ''
addrStr = None
def truncateStr(theStr, maxLen):
if len(theStr) <= maxLen:
return theStr
else:
return theStr[:maxLen-3] + '...'
if len(strType) > 0:
# We have something to display... do it and return
lenType = len(strType)
lenLabel = len(strLabel) + 3
lenLast = len(strLast) + 3
lenLabelTrunc = min(lenLabel + 3, lblTrunc + 6)
lenLastTrunc = min(lenLast + 3, lastTrunc + 6)
if lenType + lenLabel + lenLast <= maxChars:
strLabel = ' "%s"' % strLabel
strLast = ' (%s)' % strLast if lenLast>0 else ''
elif lenType + lenLabel + lenLastTrunc <= maxChars:
extraChars = maxChars - (lenType + lenLabel + lenLastTrunc)
lastTrunc += extraChars
strLabel = ' "%s"' % strLabel
strLast = ' (%s)' % truncateStr(strLast,lastTrunc) if lenLast>0 else ''
elif lenType + lenLabelTrunc + lenLastTrunc <= maxChars:
extraChars = maxChars - (lenType + lenLabelTrunc + lenLastTrunc)
lblTrunc += extraChars/2
lastTrunc += extraChars/2
strLabel = ' "%s"' % truncateStr(strLabel, lblTrunc)
strLast = ' (%s)' % truncateStr(strLast, lastTrunc) if lenLast>0 else ''
elif lenType + lenLabel <= maxChars:
strLabel = ' "%s"' % strLabel
strLast = ''
elif lenType + lenLabelTrunc <= maxChars:
lblTrunc += maxChars - (lenType + lenLabelTrunc)
strLabel = ' "%s"' % truncateStr(strLabel, lblTrunc)
strLast = ''
else:
# Total last resort, actually leave the label out...
# If we still can't fit it... too bad, we have to show something
lastTrunc = max(maxChars - (lenType + 4), 6)
strLabel = ''
strLast = ' %s' % truncateStr(strLast, lastTrunc)
if doBold>0: strType = '<b>%s</b>' % strType
if doBold>1: strLabel = '<b>%s</b>' % strLabel
if doBold>2: strLast = '<b>%s</b>' % strLast
displayStr = ''.join([strType, strLabel, strLast])
return {'String': displayStr,
'WltID': wltID,
'LboxID': lboxID,
'AddrStr': addrStr}
# If we're here, it didn't match any loaded wlt or lockbox
dispStr = ''
if scriptType in CPP_TXOUT_HAS_ADDRSTR:
addrStr = script_to_addrStr(binScript)
if len(addrStr) <= maxChars:
dispStr = addrStr
else:
dispStr = addrStr[:maxChars-3] + '...'
elif scriptType == CPP_TXOUT_MULTISIG:
M,N,a160s,pubs = getMultisigScriptInfo(binScript)
lbID = calcLockboxID(binScript)
dispStr = 'Unknown %d-of-%d (%s)' % (M,N,lbID)
addrStr = script_to_addrStr(script_to_p2sh_script(binScript))
if len(dispStr) + len(addrStr) + 3 <= maxChars:
dispStr += ' [%s]' % addrStr
elif len(dispStr) + lastTrunc + 6 <= maxChars:
dispStr += ' [%s...]' % addrStr[:lastTrunc]
elif len(binScript) == 0:
dispStr = 'Unknown Input'
elif scriptType == CPP_TXOUT_OPRETURN:
msgPos = 2
if len(binScript) > 77:
msgPos = 3
msgStr = binScript[msgPos:]
dispStr = 'Msg (%d bytes): %s' % (len(binScript) - msgPos, msgStr)
else:
addrStr = script_to_addrStr(script_to_p2sh_script(binScript))
dispStr = 'Non-Standard: %s' % addrStr
if len(dispStr) > maxChars:
dispStr = dispStr[:maxChars-3] + '...'
return {'String': dispStr,
'WltID': None,
'LboxID': None,
'AddrStr': addrStr}
def getDisplayStringForScript(binScript,
wltMap,
lboxList,
maxChars=256,
doBold=0,
prefIDOverAddr=False,
lblTrunc=12,
lastTrunc=12):
"""
NOTE: This was originally in ArmoryQt.py, but we really needed this to be
more widely accessible. And it's easier to test when this is in ArmoryUtils.
Yes, I realize that it's awkward that we have wltMap {WltID-->Wallet} but
we have a lboxList [Lbox0, Lbox1, ...]. I will have to standardize the
member names and lookup structures.
We have a script and want to show the user something useful about it.
We have a couple different display modes, since some formats are space-
constrained. For instance, the DlgConfirmSend dialog only has space
for 34 letters, as it was designed to be showing only an address string.
This is similar to self.getContribStr, but that method is more focused
on identifying participants of a multi-sig transaction. It almost
works here, but we need one that's more general.
Consider a 3-of-5 lockbox with ID Abcd1234z and label
"My long-term savings super-secure" and p2sh address 2m83zQr9981pmKnrSwa32
10 20 30 40 50 60 70
| | | | | | | |
256 Lockbox 3-of-5 "Long-term savings" (2m83zQr9981p...)
256 Lockbox 3-of-5 "Long-term savings" (Abcd1234z)
50 Lockbox 3-of-5 "Long-term sa..." (2m83zQr9981p...)
35 Lockbox 3-of-5 "Long-term savings"
32 Lockbox 3-of-5 "Long-term sa..."
256 Wallet "LabelLabelLabelLabelLabelLabel" (1j93CnrAA3xn...)
256 Wallet "LabelLabelLabelLabelLabelLabel" (Abcd1234z)
50 Wallet "LabelLabelLa..." (1j93CnrAA3xn...)
35 Wallet "LabelLabelLa..."
So we will always show the type and the label (possibly truncated). If
we can show the ID or Addr (whichever is preferred) we will do so, otherwise
it gets left out. If our truncation leaves the string too short, we
usually try to add back in a few chars. It's not perfect, but it seems to
work reliably.
The doBold arg indicates that we want to add html bold tags around the
first N parts of the return. This is applied after the length calculations
are performed, as bolding will have a very small impact on width
"""
if maxChars < 32:
LOGERROR('getDisplayStringForScript() req at least 32 bytes output')
return None
scriptType = getTxOutScriptType(binScript)
scrAddr = script_to_scrAddr(binScript)
wlt = None
for iterID, iterWlt in wltMap.iteritems():
if iterWlt.hasScrAddr(scrAddr):
wlt = iterWlt
break
lbox = None
if wlt is None:
searchScrAddr = scrAddr
if scriptType == CPP_TXOUT_MULTISIG:
searchScrAddr = script_to_scrAddr(script_to_p2sh_script(binScript))
for iterLbox in lboxList:
if searchScrAddr == iterLbox.p2shScrAddr:
lbox = iterLbox
break
# Return these with the display string
wltID = wlt.uniqueIDB58 if wlt else None
lboxID = lbox.uniqueIDB58 if lbox else None
if wlt is not None:
strType = 'Wallet:'
strLabel = wlt.labelName
addrStr = None
if scriptType in CPP_TXOUT_HAS_ADDRSTR:
addrStr = scrAddr_to_addrStr(scrAddr)
strLast = wlt.uniqueIDB58 if addrStr is None else addrStr
strLast = wlt.uniqueIDB58 if prefIDOverAddr else strLast
elif lbox is not None:
strType = 'Lockbox %d-of-%d:' % (lbox.M, lbox.N)
strLabel = lbox.shortName
addrStr = scrAddr_to_addrStr(lbox.p2shScrAddr)
strLast = lbox.uniqueIDB58 if prefIDOverAddr else addrStr
else:
strType = ''
strLabel = ''
strLast = ''
addrStr = None
def truncateStr(theStr, maxLen):
if len(theStr) <= maxLen:
return theStr
else:
return theStr[:maxLen - 3] + '...'
if len(strType) > 0:
# We have something to display... do it and return
lenType = len(strType)
lenLabel = len(strLabel) + 3
lenLast = len(strLast) + 3
lenLabelTrunc = min(lenLabel + 3, lblTrunc + 6)
lenLastTrunc = min(lenLast + 3, lastTrunc + 6)
if lenType + lenLabel + lenLast <= maxChars:
strLabel = ' "%s"' % strLabel
strLast = ' (%s)' % strLast if lenLast > 0 else ''
elif lenType + lenLabel + lenLastTrunc <= maxChars:
extraChars = maxChars - (lenType + lenLabel + lenLastTrunc)
lastTrunc += extraChars
strLabel = ' "%s"' % strLabel
strLast = ' (%s)' % truncateStr(strLast,
lastTrunc) if lenLast > 0 else ''
elif lenType + lenLabelTrunc + lenLastTrunc <= maxChars:
extraChars = maxChars - (lenType + lenLabelTrunc + lenLastTrunc)
lblTrunc += extraChars / 2
lastTrunc += extraChars / 2
strLabel = ' "%s"' % truncateStr(strLabel, lblTrunc)
strLast = ' (%s)' % truncateStr(strLast,
lastTrunc) if lenLast > 0 else ''
elif lenType + lenLabel <= maxChars:
strLabel = ' "%s"' % strLabel
strLast = ''
elif lenType + lenLabelTrunc <= maxChars:
lblTrunc += maxChars - (lenType + lenLabelTrunc)
strLabel = ' "%s"' % truncateStr(strLabel, lblTrunc)
strLast = ''
else:
# Total last resort, actually leave the label out...
# If we still can't fit it... too bad, we have to show something
lastTrunc = max(maxChars - (lenType + 4), 6)
strLabel = ''
strLast = ' %s' % truncateStr(strLast, lastTrunc)
if doBold > 0: strType = '<b>%s</b>' % strType
if doBold > 1: strLabel = '<b>%s</b>' % strLabel
if doBold > 2: strLast = '<b>%s</b>' % strLast
displayStr = ''.join([strType, strLabel, strLast])
return {
'String': displayStr,
'WltID': wltID,
'LboxID': lboxID,
'AddrStr': addrStr
}
# If we're here, it didn't match any loaded wlt or lockbox
dispStr = ''
if scriptType in CPP_TXOUT_HAS_ADDRSTR:
addrStr = script_to_addrStr(binScript)
if len(addrStr) <= maxChars:
dispStr = addrStr
else:
dispStr = addrStr[:maxChars - 3] + '...'
elif scriptType == CPP_TXOUT_MULTISIG:
M, N, a160s, pubs = getMultisigScriptInfo(binScript)
lbID = calcLockboxID(binScript)
dispStr = 'Unknown %d-of-%d (%s)' % (M, N, lbID)
addrStr = script_to_addrStr(script_to_p2sh_script(binScript))
if len(dispStr) + len(addrStr) + 3 <= maxChars:
dispStr += ' [%s]' % addrStr
elif len(dispStr) + lastTrunc + 6 <= maxChars:
dispStr += ' [%s...]' % addrStr[:lastTrunc]
elif len(binScript) == 0:
dispStr = 'Unknown Input'
else:
addrStr = script_to_addrStr(script_to_p2sh_script(binScript))
dispStr = 'Non-Standard: %s' % addrStr
if len(dispStr) > maxChars:
dispStr = dispStr[:maxChars - 3] + '...'
return {
'String': dispStr,
'WltID': None,
'LboxID': None,
'AddrStr': addrStr
}
