def decode_rs41(frequency, ppm=0, gain='automatic', bias=False, rx_queue=None, timeout=120):
""" Decode a RS41 sonde """
global latest_sonde_data, internet_push_queue, ozi_push_queue
# Add a -T option if bias is enabled
bias_option = "-T " if bias else ""
decode_cmd = "rtl_fm %s-p %d -M fm -s 15k -f %d 2>/dev/null |" % (bias_option, int(ppm), frequency)
decode_cmd += "sox -t raw -r 15k -e s -b 16 -c 1 - -r 48000 -b 8 -t wav - highpass 20 2>/dev/null |"
# Note: I've got the check-CRC option hardcoded in here as always on.
# I figure this is prudent if we're going to proceed to push this telemetry data onto a map.
decode_cmd += "./rs41ecc --crc --ecc " # if this doesn't work try -i at the end
rx_last_line = time.time()
# Receiver subprocess. Discard stderr, and feed stdout into an asynchronous read class.
rx = subprocess.Popen(decode_cmd, shell=True, stdin=None, stdout=subprocess.PIPE, preexec_fn=os.setsid)
rx_stdout = AsynchronousFileReader(rx.stdout, autostart=True)
while not rx_stdout.eof():
for line in rx_stdout.readlines():
if (line != None) and (line != ""):
try:
data = process_rs_line(line)
# Reset timeout counter.
rx_last_line = time.time()
if data != None:
# Add in a few fields that don't come from the sonde telemetry.
data['freq'] = "%.3f MHz" % (frequency/1e6)
data['type'] = "RS41"
update_flight_stats(data)
latest_sonde_data = data
if rx_queue != None:
try:
internet_push_queue.put_nowait(data)
ozi_push_queue.put_nowait(data)
except:
pass
except:
traceback.print_exc()
logging.error("Error parsing line: %s" % line)
# Check timeout counter.
if time.time() > (rx_last_line+timeout):
logging.error("RX Timed out.")
break
# Sleep for a short time.
time.sleep(0.1)
logging.error("Closing RX Thread.")
os.killpg(os.getpgid(rx.pid), signal.SIGTERM)
rx_stdout.stop()
rx_stdout.join()
return
def run(self):
# Append timings to output file
with open(self._output_file, 'a') as data_file:
# Start reading logcat
cmd_logcat = self._adb + ' logcat -v time tag long'
logcat = subprocess.Popen(cmd_logcat.split(),
stdout=subprocess.PIPE)
stdout_queue = Queue.Queue()
stdout_reader = AsynchronousFileReader(logcat.stdout, stdout_queue)
stdout_reader.start()
msg_start = 'Process ' + self._process_name + ' '
msg_end = ' has died'
msg_end_ = msg_end + '.'
begin_time = None
# Read until nothing more to read
while not stdout_reader.eof():
#time.sleep(0.1)
while not stdout_queue.empty():
line = stdout_queue.get().strip()
if ': ' not in line:
break
device_date, device_time, log = line.split(' ', 2)
tag, msg = log.split(': ', 1)
if tag.startswith(
'V/MainActivity'
) and 'onNewIntent: android.intent.action.ACTION_SHUTDOWN' in msg:
begin_time = time.time()
break
if tag.startswith('I/ActivityManager') and msg.startswith(
msg_start) and (msg.endswith(msg_end)
or msg.endswith(msg_end_)):
# Output
elapsed_time = time.time() - begin_time
str_time = str(elapsed_time) + "\n"
data_file.write(str_time)
logcat.kill()
exit()
def run(self):
# Append timings to output file
with open(self._output_file, 'a') as data_file:
# Start reading logcat
cmd_logcat = self._adb + ' logcat -v time tag long'
logcat = subprocess.Popen(cmd_logcat.split(),
stdout=subprocess.PIPE)
stdout_queue = Queue.Queue()
stdout_reader = AsynchronousFileReader(logcat.stdout, stdout_queue)
stdout_reader.start()
begin_time = None
# Read until nothing more to read
while not stdout_reader.eof():
#time.sleep(0.1)
while not stdout_queue.empty():
line = stdout_queue.get().strip()
if ': ' not in line:
break
device_date, device_time, log = line.split(' ', 2)
tag, msg = log.split(': ', 1)
if tag.startswith(
'I/ActivityManager'
) and 'org.tribler.android/.MainActivity' in msg:
begin_time = time.time()
break
if tag.startswith(
'V/onEvent') and 'TriblerStartedEvent;' in msg:
# Output
elapsed_time = time.time() - begin_time
str_time = str(elapsed_time) + "\n"
data_file.write(str_time)
logcat.kill()
exit()
def run(self):
# Append logcat to output file
with open(self._output_file, 'a') as data_file:
# Start reading logcat
cmd_logcat = self._adb + ' logcat -v time tag long'
logcat = subprocess.Popen(cmd_logcat.split(),
stdout=subprocess.PIPE)
stdout_queue = Queue.Queue()
stdout_reader = AsynchronousFileReader(logcat.stdout, stdout_queue)
stdout_reader.start()
msg_start = 'Process ' + self._process_name + ' '
msg_end = ' has died'
msg_end_ = msg_end + '.'
# Read until nothing more to read
while not stdout_reader.eof():
time.sleep(0.1)
while not stdout_queue.empty():
line = stdout_queue.get().strip()
print line
data_file.write(line + "\n")
if ': ' not in line:
break
device_date, device_time, log = line.split(' ', 2)
tag, msg = log.split(': ', 1)
if tag.startswith('I/ActivityManager') and msg.startswith(
msg_start) and (msg.endswith(msg_end)
or msg.endswith(msg_end_)):
logcat.kill()
exit()
def run(self):
# Push file
cmd_push = self._adb + ' push ' + self._input_file + ' ' + self._temp_file
print cmd_push
push = subprocess.Popen(cmd_push.split())
push.wait()
# Start reading logcat
cmd_logcat = self._adb + ' logcat -v time tag long'
logcat = subprocess.Popen(cmd_logcat.split(), stdout=subprocess.PIPE)
stdout_queue = Queue.Queue()
stdout_reader = AsynchronousFileReader(logcat.stdout, stdout_queue)
stdout_reader.start()
# Start copy file
cmd_copy = self._adb + ' shell am start -n org.internetofmoney.android/.CopyFilesActivity --es "' + self._temp_file + '" "' + self._output_file + '"'
print cmd_copy
copy = subprocess.Popen(cmd_copy.split())
started = False
# Read until nothing more to read
while not stdout_reader.eof():
time.sleep(0.1)
while not stdout_queue.empty():
line = stdout_queue.get().strip()
if ': ' not in line:
break
device_date, device_time, log = line.split(' ', 2)
tag, path = log.split(': ', 1)
if tag.startswith('E/CopyFile'):
print log
break
if tag.startswith('I/CopyFileStartIn'):
if path == self._temp_file:
started = True
print log
break
if tag.startswith('I/CopyFileStartOut'):
if started and path.endswith(self._output_file):
print log
break
if tag.startswith('I/CopyFileDoneIn'):
if started:
print log
break
if tag.startswith('I/CopyFileDoneOut'):
if not started or not path.endswith(self._output_file):
break
print log
# Cleanup
cmd_remove = self._adb + ' shell rm "' + self._temp_file + '"'
print cmd_remove
remove = subprocess.Popen(cmd_remove.split())
remove.wait()
print 'Finished!'
logcat.kill()
exit()
def decode_rs92(frequency, ppm=0, gain=-1, bias=False, rx_queue=None, almanac=None, ephemeris=None, timeout=120):
""" Decode a RS92 sonde """
global latest_sonde_data, internet_push_queue, ozi_push_queue
# Before we get started, do we need to download GPS data?
if ephemeris == None:
# If no ephemeris data defined, attempt to download it.
# get_ephemeris will either return the saved file name, or None.
ephemeris = get_ephemeris(destination="ephemeris.dat")
# If ephemeris is still None, then we failed to download the ephemeris data.
# Try and grab the almanac data instead
if ephemeris == None:
logging.error("Could not obtain ephemeris data, trying to download an almanac.")
almanac = get_almanac(destination="almanac.txt")
if almanac == None:
# We probably don't have an internet connection. Bomb out, since we can't do much with the sonde telemetry without an almanac!
logging.critical("Could not obtain GPS ephemeris or almanac data.")
return False
# Add a -T option if bias is enabled
bias_option = "-T " if bias else ""
# Add a gain parameter if we have been provided one.
if gain != -1:
gain_param = '-g %.1f ' % gain
else:
gain_param = ''
decode_cmd = "rtl_fm %s-p %d %s-M fm -s 12k -f %d 2>/dev/null |" % (bias_option, int(ppm), gain_param, frequency)
decode_cmd += "sox -t raw -r 12k -e s -b 16 -c 1 - -r 48000 -b 8 -t wav - lowpass 2500 highpass 20 2>/dev/null |"
# Note: I've got the check-CRC option hardcoded in here as always on.
# I figure this is prudent if we're going to proceed to push this telemetry data onto a map.
if ephemeris != None:
decode_cmd += "./rs92ecc -v --crc --ecc --vel -e %s" % ephemeris
elif almanac != None:
decode_cmd += "./rs92ecc -v --crc --ecc --vel -a %s" % almanac
logging.debug("Running command: %s" % decode_cmd)
rx_last_line = time.time()
# Receiver subprocess. Discard stderr, and feed stdout into an asynchronous read class.
rx = subprocess.Popen(decode_cmd, shell=True, stdin=None, stdout=subprocess.PIPE, preexec_fn=os.setsid)
rx_stdout = AsynchronousFileReader(rx.stdout, autostart=True)
while not rx_stdout.eof():
for line in rx_stdout.readlines():
if (line != None) and (line != ""):
try:
data = process_rs_line(line)
# Reset timeout counter.
rx_last_line = time.time()
if data != None:
# Add in a few fields that don't come from the sonde telemetry.
data['freq'] = "%.3f MHz" % (frequency/1e6)
data['type'] = "RS92"
update_flight_stats(data)
if rx_queue != None:
try:
internet_push_queue.put_nowait(data)
ozi_push_queue.put_nowait(data)
except:
pass
except:
traceback.print_exc()
logging.error("Error parsing line: %s" % line)
# Check timeout counter.
if time.time() > (rx_last_line+timeout):
logging.error("RX Timed out.")
break
# Sleep for a short time.
time.sleep(0.1)
logging.error("Closing RX Thread.")
os.killpg(os.getpgid(rx.pid), signal.SIGTERM)
rx_stdout.stop()
rx_stdout.join()
return
def decode_rs41(frequency,
ppm=0,
gain=-1,
bias=False,
rx_queue=None,
timeout=120,
save_log=False):
""" Decode a RS41 sonde """
global latest_sonde_data, internet_push_queue, ozi_push_queue
# Add a -T option if bias is enabled
bias_option = "-T " if bias else ""
# Add a gain parameter if we have been provided one.
if gain != -1:
gain_param = '-g %.1f ' % gain
else:
gain_param = ''
# Note: Have removed a 'highpass 20' filter from the sox line, will need to re-evaluate if adding that is useful in the future.
decode_cmd = "rtl_fm %s-p %d %s-M fm -F9 -s 15k -f %d 2>/dev/null |" % (
bias_option, int(ppm), gain_param, frequency)
decode_cmd += "sox -t raw -r 15k -e s -b 16 -c 1 - -r 48000 -b 8 -t wav - lowpass 2600 2>/dev/null |"
# Note: I've got the check-CRC option hardcoded in here as always on.
# I figure this is prudent if we're going to proceed to push this telemetry data onto a map.
decode_cmd += "./rs41ecc --crc --ecc " # if this doesn't work try -i at the end
logging.debug("Running command: %s" % decode_cmd)
rx_last_line = time.time()
# Receiver subprocess. Discard stderr, and feed stdout into an asynchronous read class.
rx = subprocess.Popen(decode_cmd,
shell=True,
stdin=None,
stdout=subprocess.PIPE,
preexec_fn=os.setsid)
rx_stdout = AsynchronousFileReader(rx.stdout, autostart=True)
_log_file = None
while not rx_stdout.eof():
for line in rx_stdout.readlines():
if (line != None) and (line != ""):
try:
data = process_rs_line(line)
# Reset timeout counter.
rx_last_line = time.time()
if data != None:
# Add in a few fields that don't come from the sonde telemetry.
data['freq'] = "%.3f MHz" % (frequency / 1e6)
data['type'] = "RS41"
# Per-Sonde Logging
if save_log:
if _log_file is None:
_log_file_name = "./log/%s_%s_%s_%d.log" % (
datetime.datetime.utcnow().strftime(
"%Y%m%d-%H%M%S"), data['id'],
data['type'], int(frequency / 1e3))
_log_file = open(_log_file_name, 'wb')
# Write a log line
# datetime,id,frame_no,lat,lon,alt,type,frequency
_log_line = "%s,%s,%d,%.5f,%.5f,%.1f,%s,%.3f\n" % (
data['datetime_str'], data['id'],
data['frame'], data['lat'], data['lon'],
data['alt'], data['type'], frequency / 1e6)
_log_file.write(_log_line)
_log_file.flush()
update_flight_stats(data)
latest_sonde_data = data
if rx_queue != None:
try:
internet_push_queue.put_nowait(data)
ozi_push_queue.put_nowait(data)
except:
pass
except:
traceback.print_exc()
logging.error("Error parsing line: %s" % line)
# Check timeout counter.
if time.time() > (rx_last_line + timeout):
logging.error("RX Timed out.")
break
# Sleep for a short time.
time.sleep(0.1)
# If we were writing a log, close the file.
if _log_file != None:
_log_file.flush()
_log_file.close()
logging.error("Closing RX Thread.")
os.killpg(os.getpgid(rx.pid), signal.SIGTERM)
rx_stdout.stop()
rx_stdout.join()
return
def decode_rs92(frequency,
ppm=0,
gain=-1,
bias=False,
rx_queue=None,
almanac=None,
ephemeris=None,
timeout=120,
save_log=False):
""" Decode a RS92 sonde """
global latest_sonde_data, internet_push_queue, ozi_push_queue
# Before we get started, do we need to download GPS data?
if ephemeris == None:
# If no ephemeris data defined, attempt to download it.
# get_ephemeris will either return the saved file name, or None.
ephemeris = get_ephemeris(destination="ephemeris.dat")
# If ephemeris is still None, then we failed to download the ephemeris data.
# Try and grab the almanac data instead
if ephemeris == None:
logging.error(
"Could not obtain ephemeris data, trying to download an almanac.")
almanac = get_almanac(destination="almanac.txt")
if almanac == None:
# We probably don't have an internet connection. Bomb out, since we can't do much with the sonde telemetry without an almanac!
logging.critical("Could not obtain GPS ephemeris or almanac data.")
return False
# Add a -T option if bias is enabled
bias_option = "-T " if bias else ""
# Add a gain parameter if we have been provided one.
if gain != -1:
gain_param = '-g %.1f ' % gain
else:
gain_param = ''
# Example command:
# rtl_fm -p 0 -g 26.0 -M fm -F9 -s 12k -f 400500000 | sox -t raw -r 12k -e s -b 16 -c 1 - -r 48000 -b 8 -t wav - highpass 20 lowpass 2500 2>/dev/null | ./rs92ecc
decode_cmd = "rtl_fm %s-p %d %s-M fm -F9 -s 12k -f %d 2>/dev/null |" % (
bias_option, int(ppm), gain_param, frequency)
decode_cmd += "sox -t raw -r 12k -e s -b 16 -c 1 - -r 48000 -b 8 -t wav - lowpass 2500 highpass 20 2>/dev/null |"
# Note: I've got the check-CRC option hardcoded in here as always on.
# I figure this is prudent if we're going to proceed to push this telemetry data onto a map.
if ephemeris != None:
decode_cmd += "./rs92ecc -vx -v --crc --ecc --vel -e %s" % ephemeris
elif almanac != None:
decode_cmd += "./rs92ecc -vx -v --crc --ecc --vel -a %s" % almanac
logging.debug("Running command: %s" % decode_cmd)
rx_last_line = time.time()
# Receiver subprocess. Discard stderr, and feed stdout into an asynchronous read class.
rx = subprocess.Popen(decode_cmd,
shell=True,
stdin=None,
stdout=subprocess.PIPE,
preexec_fn=os.setsid)
rx_stdout = AsynchronousFileReader(rx.stdout, autostart=True)
_log_file = None
while not rx_stdout.eof():
for line in rx_stdout.readlines():
if (line != None) and (line != ""):
try:
data = process_rs_line(line)
# Reset timeout counter.
rx_last_line = time.time()
if data != None:
# Add in a few fields that don't come from the sonde telemetry.
data['freq'] = "%.3f MHz" % (frequency / 1e6)
data['type'] = "RS92"
# If we are seeing any aux data (i.e. there is something strapped to this RS92), append '-Ozone' to the type.
if 'aux' in data.keys():
_ozone = "-Ozone"
else:
_ozone = ""
# Per-Sonde Logging
if save_log:
if _log_file is None:
_log_file_name = "./log/%s_%s_%s_%d.log" % (
datetime.datetime.utcnow().strftime(
"%Y%m%d-%H%M%S"), data['id'],
(data['type'] + _ozone),
int(frequency / 1e3))
_log_file = open(_log_file_name, 'wb')
# Write a log line
# datetime,id,frame_no,lat,lon,alt,type,frequency
_log_line = "%s,%s,%d,%.5f,%.5f,%.1f,%s,%.3f\n" % (
data['datetime_str'], data['id'],
data['frame'], data['lat'], data['lon'],
data['alt'],
(data['type'] + _ozone), frequency / 1e6)
_log_file.write(_log_line)
_log_file.flush()
update_flight_stats(data)
if rx_queue != None:
try:
internet_push_queue.put_nowait(data)
ozi_push_queue.put_nowait(data)
except:
pass
except:
traceback.print_exc()
logging.error("Error parsing line: %s" % line)
# Check timeout counter.
if time.time() > (rx_last_line + timeout):
logging.error("RX Timed out.")
break
# Sleep for a short time.
time.sleep(0.1)
# If we were writing a log, close the file.
if _log_file != None:
_log_file.flush()
_log_file.close()
logging.error("Closing RX Thread.")
os.killpg(os.getpgid(rx.pid), signal.SIGTERM)
rx_stdout.stop()
rx_stdout.join()
return
