def satellite6_capsule_zstream_upgrade():
"""Upgrades Capsule to its latest zStream version
Note: For zstream upgrade both 'To' and 'From' version should be same
FROM_VERSION
Current satellite version which will be upgraded to latest version
TO_VERSION
Next satellite version to which satellite will be upgraded
"""
logger.highlight('\n========== CAPSULE UPGRADE =================\n')
from_version = os.environ.get('FROM_VERSION')
to_version = os.environ.get('TO_VERSION')
if not from_version == to_version:
logger.warning('zStream Upgrade on Capsule cannot be performed as '
'FROM and TO versions are not same!')
sys.exit(1)
major_ver = distro_info()[1]
set_yum_debug_level()
if os.environ.get('CAPSULE_URL'):
disable_repos('rhel-{0}-server-satellite-capsule-{1}-rpms'.format(
major_ver, from_version))
# Check what repos are set
run('yum repolist')
if from_version == '6.1' and major_ver == '6':
enable_repos('rhel-server-rhscl-{0}-rpms'.format(major_ver))
if from_version == '6.0':
# Stop katello services, except mongod
run('for i in qpidd pulp_workers pulp_celerybeat '
'pulp_resource_manager httpd; do service $i stop; done')
run('yum clean all', warn_only=True)
logger.info('Updating system and capsule packages ... ')
preyum_time = datetime.now().replace(microsecond=0)
update_packages(quiet=False)
postyum_time = datetime.now().replace(microsecond=0)
logger.highlight('Time taken for capsule packages update - {}'.format(
str(postyum_time-preyum_time)))
# Rebooting the system to see possible errors
if os.environ.get('RHEV_CAP_HOST'):
reboot(120)
if from_version == '6.0':
# Stopping the services again which started in reboot
run('for i in qpidd pulp_workers pulp_celerybeat '
'pulp_resource_manager httpd; do service $i stop; done')
setup_capsule_firewall()
preup_time = datetime.now().replace(microsecond=0)
if to_version == '6.0':
run('katello-installer --upgrade')
elif to_version == '6.1':
run('capsule-installer --upgrade')
else:
run('satellite-installer --scenario capsule --upgrade ')
postup_time = datetime.now().replace(microsecond=0)
logger.highlight('Time taken for Capsule Upgrade - {}'.format(
str(postup_time-preup_time)))
run('katello-service status', warn_only=True)
def satellite6_upgrade(admin_password=None):
"""Upgrades satellite from old version to latest version.
:param admin_password: A string. Defaults to 'changeme'.
Foreman admin password for hammer commands.
The following environment variables affect this command:
ADMIN_PASSWORD
Optional, defaults to 'changeme'. Foreman admin password.
BASE_URL
Optional, defaults to available satellite version in CDN.
URL for the compose repository.
TO_VERSION
Satellite version to upgrade to and enable repos while upgrading.
e.g '6.1','6.2'
"""
to_version = os.environ.get('TO_VERSION')
if to_version not in ['6.1', '6.2']:
print('Wrong Satellite Version Provided to upgrade to. '
'Provide one of 6.1, 6.2')
sys.exit(1)
# Sync capsule and tools repo
if admin_password is None:
admin_password = os.environ.get('ADMIN_PASSWORD', 'changeme')
# Setting yum stdout log level to be less verbose
set_yum_debug_level()
# Removing rhel-released and rhel-optional repo
run('rm -rf /etc/yum.repos.d/rhel-{optional,released}.repo')
print('Wait till Packages update ... ')
update_packages(quiet=True)
# Rebooting the system to see possible errors
if os.environ.get('RHEV_SATELLITE'):
reboot(120)
# Setting Satellite61 Repos
major_ver = distro_info()[1]
base_url = os.environ.get('BASE_URL')
# Following disables the old satellite repo and extra repos enabled
# during subscribe e.g Load balancer
disable_repos('*', silent=True)
enable_repos('rhel-{0}-server-rpms'.format(major_ver))
enable_repos('rhel-server-rhscl-{0}-rpms'.format(major_ver))
if base_url is None:
enable_repos('rhel-{0}-server-satellite-{1}-rpms'.format(
major_ver, to_version))
else:
# Add Sat6 repo from latest compose
satellite_repo = StringIO()
satellite_repo.write('[sat6]\n')
satellite_repo.write('name=satellite 6\n')
satellite_repo.write('baseurl={0}\n'.format(base_url))
satellite_repo.write('enabled=1\n')
satellite_repo.write('gpgcheck=0\n')
put(local_path=satellite_repo,
remote_path='/etc/yum.repos.d/sat6.repo')
satellite_repo.close()
# Stop katello services, except mongod
run('katello-service stop')
if to_version == '6.1':
run('service-wait mongod start')
run('yum clean all', warn_only=True)
# Updating the packages again after setting sat6 repo
print('Wait till packages update ... ')
print('YUM UPDATE started at: {0}'.format(time.ctime()))
update_packages(quiet=False)
print('YUM UPDATE finished at: {0}'.format(time.ctime()))
# Rebooting the system again for possible errors
if os.environ.get('RHEV_SATELLITE'):
reboot(120)
# Stop the service again which started in restart
run('katello-service stop')
if to_version == '6.1':
run('service-wait mongod start')
# Running Upgrade
print('SATELLITE UPGRADE started at: {0}'.format(time.ctime()))
if to_version == '6.1':
run('katello-installer --upgrade')
else:
run('satellite-installer --scenario satellite --upgrade')
print('SATELLITE UPGRADE finished at: {0}'.format(time.ctime()))
# Test the Upgrade is successful
run('hammer -u admin -p {0} ping'.format(admin_password), warn_only=True)
# Test The status of all katello services
run('katello-service status', warn_only=True)
def satellite6_upgrade():
"""Upgrades satellite from old version to latest version.
:param admin_password: A string. Defaults to 'changeme'.
Foreman admin password for hammer commands.
The following environment variables affect this command:
ADMIN_PASSWORD
Optional, defaults to 'changeme'. Foreman admin password.
BASE_URL
Optional, defaults to available satellite version in CDN.
URL for the compose repository.
TO_VERSION
Satellite version to upgrade to and enable repos while upgrading.
e.g '6.1','6.2'
"""
to_version = os.environ.get('TO_VERSION')
rhev_sat_host = os.environ.get('RHEV_SAT_HOST')
base_url = os.environ.get('BASE_URL')
if to_version not in ['6.1', '6.2']:
print('Wrong Satellite Version Provided to upgrade to. '
'Provide one of 6.1, 6.2')
sys.exit(1)
# Sync capsule and tools repo
admin_password = os.environ.get('ADMIN_PASSWORD', 'changeme')
# Setting yum stdout log level to be less verbose
set_yum_debug_level()
# Setup firewall rules on Satellite
setup_satellite_firewall()
# Removing rhel-released and rhel-optional repo
run('rm -rf /etc/yum.repos.d/rhel-{optional,released}.repo')
print('Wait till Packages update ... ')
update_packages(quiet=True)
# Rebooting the system to see possible errors
if rhev_sat_host:
reboot(120)
# Setting Satellite to_version Repos
major_ver = distro_info()[1]
# Following disables the old satellite repo and extra repos enabled
# during subscribe e.g Load balancer Repo
disable_repos('*', silent=True)
enable_repos('rhel-{0}-server-rpms'.format(major_ver))
enable_repos('rhel-server-rhscl-{0}-rpms'.format(major_ver))
# If CDN upgrade then enable satellite latest version repo
if base_url is None:
enable_repos('rhel-{0}-server-satellite-{1}-rpms'.format(
major_ver, to_version))
# Else, consider this as Downstream upgrade
else:
# Add Sat6 repo from latest compose
satellite_repo = StringIO()
satellite_repo.write('[sat6]\n')
satellite_repo.write('name=satellite 6\n')
satellite_repo.write('baseurl={0}\n'.format(base_url))
satellite_repo.write('enabled=1\n')
satellite_repo.write('gpgcheck=0\n')
put(local_path=satellite_repo,
remote_path='/etc/yum.repos.d/sat6.repo')
satellite_repo.close()
# Stop katello services, except mongod
run('katello-service stop')
if to_version == '6.1':
run('service-wait mongod start')
run('yum clean all', warn_only=True)
# Updating the packages again after setting sat6 repo
print('Wait till packages update ... ')
print('YUM UPDATE started at: {0}'.format(time.ctime()))
update_packages(quiet=False)
print('YUM UPDATE finished at: {0}'.format(time.ctime()))
# Rebooting the system again for possible errors
# Only for RHEV based satellite and not for personal one
if rhev_sat_host:
reboot(120)
if to_version == '6.1':
# Stop the service again which started in restart
# This step is not required with 6.2 upgrade as installer itself
# stop all the services before upgrade
run('katello-service stop')
run('service-wait mongod start')
# Verifying impact of BZ #1357655 on upgrade
if rhev_sat_host:
run('katello-installer --help', quiet=True)
# Running Upgrade
print('SATELLITE UPGRADE started at: {0}'.format(time.ctime()))
if to_version == '6.1':
run('katello-installer --upgrade')
else:
run('satellite-installer --scenario satellite --upgrade')
print('SATELLITE UPGRADE finished at: {0}'.format(time.ctime()))
# Test the Upgrade is successful
run('hammer -u admin -p {0} ping'.format(admin_password), warn_only=True)
# Test The status of all katello services
run('katello-service status', warn_only=True)
def satellite6_capsule_upgrade(cap_host):
"""Upgrades capsule from existing version to latest version.
:param string cap_host: Capsule hostname onto which the capsule upgrade
will run
The following environment variables affect this command:
CAPSULE_URL
Optional, defaults to available capsule version in CDN.
URL for capsule of latest compose to upgrade.
FROM_VERSION
Capsule current version, to disable repos while upgrading.
e.g '6.1','6.0'
TO_VERSION
Capsule version to upgrade to and enable repos while upgrading.
e.g '6.1','6.2'
"""
logger.highlight('\n========== CAPSULE UPGRADE =================\n')
sat_host = env.get('satellite_host')
from_version = os.environ.get('FROM_VERSION')
to_version = os.environ.get('TO_VERSION')
set_yum_debug_level()
setup_capsule_firewall()
major_ver = distro_info()[1]
# Re-register Capsule for 6.2
# AS per host unification feature: if there is a host registered where the
# Host and Content Host are in different organizations (e.g. host not in
# org, and content host in one), the content host will be unregistered as
# part of the upgrade process.
if to_version == '6.2':
ak_name = os.environ.get('CAPSULE_AK') if os.environ.get(
'CAPSULE_AK') else os.environ.get('RHEV_CAPSULE_AK')
run('subscription-manager register --org="Default_Organization" '
'--activationkey={0} --force'.format(ak_name))
disable_repos('rhel-{0}-server-satellite-capsule-{1}-rpms'.format(
major_ver, from_version))
if from_version == '6.1' and major_ver == '6':
enable_repos('rhel-server-rhscl-{0}-rpms'.format(major_ver))
# Check what repos are set
run('yum repolist')
if from_version == '6.0':
# Stop katello services, except mongod
run('for i in qpidd pulp_workers pulp_celerybeat '
'pulp_resource_manager httpd; do service $i stop; done')
run('yum clean all', warn_only=True)
logger.info('Updating system and capsule packages ... ')
preyum_time = datetime.now().replace(microsecond=0)
update_packages(quiet=False)
postyum_time = datetime.now().replace(microsecond=0)
logger.highlight('Time taken for capsule packages update - {}'.format(
str(postyum_time-preyum_time)))
if from_version == '6.0':
run('yum install -y capsule-installer', warn_only=True)
# Copy answer file from katello to capule installer
run('cp /etc/katello-installer/answers.capsule-installer.yaml.rpmsave '
'/etc/capsule-installer/answers.capsule-installer.yaml',
warn_only=True)
execute(
generate_capsule_certs,
cap_host,
True,
host=sat_host
)
# Copying the capsule cert to capsule
execute(lambda: run("scp -o 'StrictHostKeyChecking no' {0}-certs.tar "
"root@{0}:/home/".format(cap_host)), host=sat_host)
# Rebooting the system to see possible errors
if os.environ.get('RHEV_CAP_HOST'):
reboot(120)
if from_version == '6.0':
# Stopping the services again which started in reboot
run('for i in qpidd pulp_workers pulp_celerybeat '
'pulp_resource_manager httpd; do service $i stop; done')
setup_capsule_firewall()
preup_time = datetime.now().replace(microsecond=0)
if to_version == '6.1':
run('capsule-installer --upgrade --certs-tar '
'/home/{0}-certs.tar'.format(cap_host))
else:
run('satellite-installer --scenario capsule --upgrade '
'--certs-tar /home/{0}-certs.tar'.format(cap_host))
postup_time = datetime.now().replace(microsecond=0)
logger.highlight('Time taken for Capsule Upgrade - {}'.format(
str(postup_time-preup_time)))
run('katello-service status', warn_only=True)
def satellite6_upgrade():
"""Upgrades satellite from old version to latest version.
The following environment variables affect this command:
BASE_URL
Optional, defaults to available satellite version in CDN.
URL for the compose repository
TO_VERSION
Satellite version to upgrade to and enable repos while upgrading.
e.g '6.1','6.2'
"""
to_version = os.environ.get('TO_VERSION')
rhev_sat_host = os.environ.get('RHEV_SAT_HOST')
base_url = os.environ.get('BASE_URL')
if to_version not in ['6.1', '6.2']:
print('Wrong Satellite Version Provided to upgrade to. '
'Provide one of 6.1, 6.2')
sys.exit(1)
# Setting yum stdout log level to be less verbose
set_yum_debug_level()
setup_satellite_firewall()
run('rm -rf /etc/yum.repos.d/rhel-{optional,released}.repo')
print('Wait till Packages update ... ')
update_packages(quiet=True)
# Rebooting the system to see possible errors
if rhev_sat_host:
reboot(120)
# Setting Satellite to_version Repos
major_ver = distro_info()[1]
# Following disables the old satellite repo and extra repos enabled
# during subscribe e.g Load balancer Repo
disable_repos('*', silent=True)
enable_repos('rhel-{0}-server-rpms'.format(major_ver))
enable_repos('rhel-server-rhscl-{0}-rpms'.format(major_ver))
# If CDN upgrade then enable satellite latest version repo
if base_url is None:
enable_repos('rhel-{0}-server-satellite-{1}-rpms'.format(
major_ver, to_version))
# Else, consider this as Downstream upgrade
else:
# Add Sat6 repo from latest compose
satellite_repo = StringIO()
satellite_repo.write('[sat6]\n')
satellite_repo.write('name=satellite 6\n')
satellite_repo.write('baseurl={0}\n'.format(base_url))
satellite_repo.write('enabled=1\n')
satellite_repo.write('gpgcheck=0\n')
put(local_path=satellite_repo,
remote_path='/etc/yum.repos.d/sat6.repo')
satellite_repo.close()
# Stop katello services, except mongod
run('katello-service stop')
if to_version == '6.1':
run('service-wait mongod start')
run('yum clean all', warn_only=True)
# Updating the packages again after setting sat6 repo
print('Wait till packages update ... ')
print('YUM UPDATE started at: {0}'.format(time.ctime()))
update_packages(quiet=False)
print('YUM UPDATE finished at: {0}'.format(time.ctime()))
# Rebooting the system again for possible errors
# Only for RHEV based satellite and not for personal one
if rhev_sat_host:
reboot(120)
if to_version == '6.1':
# Stop the service again which started in restart
# This step is not required with 6.2 upgrade as installer itself
# stop all the services before upgrade
run('katello-service stop')
run('service-wait mongod start')
# Verifying impact of BZ #1357655 on upgrade
if rhev_sat_host:
run('katello-installer --help', quiet=True)
# Running Upgrade
print('SATELLITE UPGRADE started at: {0}'.format(time.ctime()))
if to_version == '6.1':
run('katello-installer --upgrade')
else:
run('satellite-installer --scenario satellite --upgrade')
print('SATELLITE UPGRADE finished at: {0}'.format(time.ctime()))
# Test the Upgrade is successful
set_hammer_config()
hammer('ping')
run('katello-service status', warn_only=True)
def satellite6_upgrade():
"""Upgrades satellite from old version to latest version.
The following environment variables affect this command:
BASE_URL
Optional, defaults to available satellite version in CDN.
URL for the compose repository
TO_VERSION
Satellite version to upgrade to and enable repos while upgrading.
e.g '6.1','6.2'
"""
logger.highlight('\n========== SATELLITE UPGRADE =================\n')
to_version = os.environ.get('TO_VERSION')
rhev_sat_host = os.environ.get('RHEV_SAT_HOST')
base_url = os.environ.get('BASE_URL')
if to_version not in ['6.1', '6.2']:
logger.warning('Wrong Satellite Version Provided to upgrade to. '
'Provide one of 6.1, 6.2')
sys.exit(1)
# Setting yum stdout log level to be less verbose
set_yum_debug_level()
setup_satellite_firewall()
run('rm -rf /etc/yum.repos.d/rhel-{optional,released}.repo')
logger.info('Updating system packages ... ')
update_packages(quiet=True)
# Rebooting the system to see possible errors
if rhev_sat_host:
reboot(160)
# Setting Satellite to_version Repos
major_ver = distro_info()[1]
# Following disables the old satellite repo and extra repos enabled
# during subscribe e.g Load balancer Repo
disable_repos('*', silent=True)
enable_repos('rhel-{0}-server-rpms'.format(major_ver))
enable_repos('rhel-server-rhscl-{0}-rpms'.format(major_ver))
# If CDN upgrade then enable satellite latest version repo
if base_url is None:
enable_repos('rhel-{0}-server-satellite-{1}-rpms'.format(
major_ver, to_version))
# Remove old custom sat repo
for fname in os.listdir('/etc/yum.repos.d/'):
if 'sat' in fname.lower():
os.remove('/etc/yum.repos.d/{}'.format(fname))
# Else, consider this as Downstream upgrade
else:
# Add Sat6 repo from latest compose
satellite_repo = StringIO()
satellite_repo.write('[sat6]\n')
satellite_repo.write('name=satellite 6\n')
satellite_repo.write('baseurl={0}\n'.format(base_url))
satellite_repo.write('enabled=1\n')
satellite_repo.write('gpgcheck=0\n')
put(local_path=satellite_repo,
remote_path='/etc/yum.repos.d/sat6.repo')
satellite_repo.close()
# Check what repos are set
run('yum repolist')
# Stop katello services, except mongod
run('katello-service stop')
if to_version == '6.1':
run('service-wait mongod start')
run('yum clean all', warn_only=True)
# Updating the packages again after setting sat6 repo
logger.info('Updating satellite packages ... ')
preyum_time = datetime.now().replace(microsecond=0)
update_packages(quiet=False)
postyum_time = datetime.now().replace(microsecond=0)
logger.highlight('Time taken for satellite packages update - {}'.format(
str(postyum_time-preyum_time)))
# Rebooting the system again for possible errors
# Only for RHEV based satellite and not for personal one
if rhev_sat_host:
reboot(160)
if to_version == '6.1':
# Stop the service again which started in restart
# This step is not required with 6.2 upgrade as installer itself
# stop all the services before upgrade
run('katello-service stop')
run('service-wait mongod start')
# Running Upgrade
preup_time = datetime.now().replace(microsecond=0)
if to_version == '6.1':
run('katello-installer --upgrade')
else:
run('satellite-installer --scenario satellite --upgrade')
postup_time = datetime.now().replace(microsecond=0)
logger.highlight('Time taken for Satellite Upgrade - {}'.format(
str(postup_time-preup_time)))
# Test the Upgrade is successful
set_hammer_config()
hammer('ping')
run('katello-service status', warn_only=True)
# Enable ostree feature only for rhel7 and sat6.2
if to_version == '6.2' and major_ver == '7':
enable_ostree(sat_version='6.2')
if os.environ.get('RUN_EXISTANCE_TESTS', 'false').lower() == 'true':
logger.info('Setting up postupgrade datastore for existance tests..')
set_datastore('postupgrade')
def satellite6_zstream_upgrade():
"""Upgrades Satellite Server to its latest zStream version
Note: For zstream upgrade both 'To' and 'From' version should be same
FROM_VERSION
Current satellite version which will be upgraded to latest version
TO_VERSION
Next satellite version to which satellite will be upgraded
"""
logger.highlight('\n========== SATELLITE UPGRADE =================\n')
from_version = os.environ.get('FROM_VERSION')
to_version = os.environ.get('TO_VERSION')
if not from_version == to_version:
logger.warning('zStream Upgrade on Satellite cannot be performed as '
'FROM and TO versions are not same!')
sys.exit(1)
base_url = os.environ.get('BASE_URL')
# Setting yum stdout log level to be less verbose
set_yum_debug_level()
setup_satellite_firewall()
major_ver = distro_info()[1]
# Following disables the old satellite repo and extra repos enabled
# during subscribe e.g Load balancer Repo
disable_repos('*', silent=True)
enable_repos('rhel-{0}-server-rpms'.format(major_ver))
enable_repos('rhel-server-rhscl-{0}-rpms'.format(major_ver))
# If CDN upgrade then enable satellite latest version repo
if base_url is None:
enable_repos('rhel-{0}-server-satellite-{1}-rpms'.format(
major_ver, to_version))
# Remove old custom sat repo
for fname in os.listdir('/etc/yum.repos.d/'):
if 'sat' in fname.lower():
os.remove('/etc/yum.repos.d/{}'.format(fname))
# Else, consider this as Downstream upgrade
else:
# Add Sat6 repo from latest compose
satellite_repo = StringIO()
satellite_repo.write('[sat6]\n')
satellite_repo.write('name=satellite 6\n')
satellite_repo.write('baseurl={0}\n'.format(base_url))
satellite_repo.write('enabled=1\n')
satellite_repo.write('gpgcheck=0\n')
put(local_path=satellite_repo,
remote_path='/etc/yum.repos.d/sat6.repo')
satellite_repo.close()
# Check what repos are set
run('yum repolist')
# Stop katello services, except mongod
run('katello-service stop')
if to_version == '6.1':
run('service-wait mongod start')
run('yum clean all', warn_only=True)
# Updating the packages again after setting sat6 repo
logger.info('Updating system and satellite packages... ')
preyum_time = datetime.now().replace(microsecond=0)
update_packages(quiet=False)
postyum_time = datetime.now().replace(microsecond=0)
logger.highlight('Time taken for system and satellite packages update - '
'{}'.format(str(postyum_time-preyum_time)))
# Rebooting the system to check the possible issues if kernal is updated
if os.environ.get('RHEV_SAT_HOST'):
reboot(120)
if to_version == '6.1':
# Stop the service again which started in restart
# This step is not required with 6.2 upgrade as installer itself
# stop all the services before upgrade
run('katello-service stop')
run('service-wait mongod start')
# Running Upgrade
preup_time = datetime.now().replace(microsecond=0)
if to_version == '6.1':
run('katello-installer --upgrade')
else:
run('satellite-installer --scenario satellite --upgrade')
postup_time = datetime.now().replace(microsecond=0)
logger.highlight('Time taken for Satellite Upgrade - {}'.format(
str(postup_time-preup_time)))
# Test the Upgrade is successful
set_hammer_config()
hammer('ping')
run('katello-service status', warn_only=True)
if os.environ.get('RUN_EXISTANCE_TESTS', 'false').lower() == 'true':
logger.info('Setting up postupgrade datastore for existance tests')
set_datastore('postupgrade')
def satellite6_upgrade():
"""Upgrades satellite from old version to latest version.
The following environment variables affect this command:
BASE_URL
Optional, defaults to available satellite version in CDN.
URL for the compose repository
TO_VERSION
Satellite version to upgrade to and enable repos while upgrading.
e.g '6.1','6.2'
"""
logger.highlight('\n========== SATELLITE UPGRADE =================\n')
to_version = os.environ.get('TO_VERSION')
rhev_sat_host = os.environ.get('RHEV_SAT_HOST')
base_url = os.environ.get('BASE_URL')
if to_version not in ['6.1', '6.2']:
logger.warning('Wrong Satellite Version Provided to upgrade to. '
'Provide one of 6.1, 6.2')
sys.exit(1)
# Setting yum stdout log level to be less verbose
set_yum_debug_level()
setup_satellite_firewall()
run('rm -rf /etc/yum.repos.d/rhel-{optional,released}.repo')
logger.info('Updating system packages ... ')
update_packages(quiet=True)
# Rebooting the system to see possible errors
if rhev_sat_host:
reboot(160)
# Setting Satellite to_version Repos
major_ver = distro_info()[1]
# Following disables the old satellite repo and extra repos enabled
# during subscribe e.g Load balancer Repo
disable_repos('*', silent=True)
enable_repos('rhel-{0}-server-rpms'.format(major_ver))
enable_repos('rhel-server-rhscl-{0}-rpms'.format(major_ver))
# If CDN upgrade then enable satellite latest version repo
if base_url is None:
enable_repos('rhel-{0}-server-satellite-{1}-rpms'.format(
major_ver, to_version))
# Remove old custom sat repo
for fname in os.listdir('/etc/yum.repos.d/'):
if 'sat' in fname.lower():
os.remove('/etc/yum.repos.d/{}'.format(fname))
# Else, consider this as Downstream upgrade
else:
# Add Sat6 repo from latest compose
satellite_repo = StringIO()
satellite_repo.write('[sat6]\n')
satellite_repo.write('name=satellite 6\n')
satellite_repo.write('baseurl={0}\n'.format(base_url))
satellite_repo.write('enabled=1\n')
satellite_repo.write('gpgcheck=0\n')
put(local_path=satellite_repo,
remote_path='/etc/yum.repos.d/sat6.repo')
satellite_repo.close()
# Check what repos are set
run('yum repolist')
# Stop katello services, except mongod
run('katello-service stop')
if to_version == '6.1':
run('service-wait mongod start')
run('yum clean all', warn_only=True)
# Updating the packages again after setting sat6 repo
logger.info('Updating satellite packages ... ')
preyum_time = datetime.now().replace(microsecond=0)
update_packages(quiet=False)
postyum_time = datetime.now().replace(microsecond=0)
logger.highlight('Time taken for satellite packages update - {}'.format(
str(postyum_time - preyum_time)))
# Rebooting the system again for possible errors
# Only for RHEV based satellite and not for personal one
if rhev_sat_host:
reboot(160)
if to_version == '6.1':
# Stop the service again which started in restart
# This step is not required with 6.2 upgrade as installer itself
# stop all the services before upgrade
run('katello-service stop')
run('service-wait mongod start')
# Running Upgrade
preup_time = datetime.now().replace(microsecond=0)
if to_version == '6.1':
run('katello-installer --upgrade')
else:
run('satellite-installer --scenario satellite --upgrade')
postup_time = datetime.now().replace(microsecond=0)
logger.highlight('Time taken for Satellite Upgrade - {}'.format(
str(postup_time - preup_time)))
# Test the Upgrade is successful
set_hammer_config()
hammer('ping')
run('katello-service status', warn_only=True)
# Enable ostree feature only for rhel7 and sat6.2
if to_version == '6.2' and major_ver == '7':
enable_ostree(sat_version='6.2')
if os.environ.get('RUN_EXISTANCE_TESTS', 'false').lower() == 'true':
logger.info('Setting up postupgrade datastore for existance tests..')
set_datastore('postupgrade')
def satellite6_zstream_upgrade():
"""Upgrades Satellite Server to its latest zStream version
Note: For zstream upgrade both 'To' and 'From' version should be same
FROM_VERSION
Current satellite version which will be upgraded to latest version
TO_VERSION
Next satellite version to which satellite will be upgraded
"""
logger.highlight('\n========== SATELLITE UPGRADE =================\n')
from_version = os.environ.get('FROM_VERSION')
to_version = os.environ.get('TO_VERSION')
if not from_version == to_version:
logger.warning('zStream Upgrade on Satellite cannot be performed as '
'FROM and TO versions are not same!')
sys.exit(1)
base_url = os.environ.get('BASE_URL')
# Setting yum stdout log level to be less verbose
set_yum_debug_level()
setup_satellite_firewall()
major_ver = distro_info()[1]
# Following disables the old satellite repo and extra repos enabled
# during subscribe e.g Load balancer Repo
disable_repos('*', silent=True)
enable_repos('rhel-{0}-server-rpms'.format(major_ver))
enable_repos('rhel-server-rhscl-{0}-rpms'.format(major_ver))
# If CDN upgrade then enable satellite latest version repo
if base_url is None:
enable_repos('rhel-{0}-server-satellite-{1}-rpms'.format(
major_ver, to_version))
# Remove old custom sat repo
for fname in os.listdir('/etc/yum.repos.d/'):
if 'sat' in fname.lower():
os.remove('/etc/yum.repos.d/{}'.format(fname))
# Else, consider this as Downstream upgrade
else:
# Add Sat6 repo from latest compose
satellite_repo = StringIO()
satellite_repo.write('[sat6]\n')
satellite_repo.write('name=satellite 6\n')
satellite_repo.write('baseurl={0}\n'.format(base_url))
satellite_repo.write('enabled=1\n')
satellite_repo.write('gpgcheck=0\n')
put(local_path=satellite_repo,
remote_path='/etc/yum.repos.d/sat6.repo')
satellite_repo.close()
# Check what repos are set
run('yum repolist')
# Stop katello services, except mongod
run('katello-service stop')
if to_version == '6.1':
run('service-wait mongod start')
run('yum clean all', warn_only=True)
# Updating the packages again after setting sat6 repo
logger.info('Updating system and satellite packages... ')
preyum_time = datetime.now().replace(microsecond=0)
update_packages(quiet=False)
postyum_time = datetime.now().replace(microsecond=0)
logger.highlight('Time taken for system and satellite packages update - '
'{}'.format(str(postyum_time - preyum_time)))
# Rebooting the system to check the possible issues if kernal is updated
if os.environ.get('RHEV_SAT_HOST'):
reboot(120)
if to_version == '6.1':
# Stop the service again which started in restart
# This step is not required with 6.2 upgrade as installer itself
# stop all the services before upgrade
run('katello-service stop')
run('service-wait mongod start')
# Running Upgrade
preup_time = datetime.now().replace(microsecond=0)
if to_version == '6.1':
run('katello-installer --upgrade')
else:
run('satellite-installer --scenario satellite --upgrade')
postup_time = datetime.now().replace(microsecond=0)
logger.highlight('Time taken for Satellite Upgrade - {}'.format(
str(postup_time - preup_time)))
# Test the Upgrade is successful
set_hammer_config()
hammer('ping')
run('katello-service status', warn_only=True)
if os.environ.get('RUN_EXISTANCE_TESTS', 'false').lower() == 'true':
logger.info('Setting up postupgrade datastore for existance tests')
set_datastore('postupgrade')
