def _start_scan(self, timeout=180):
""" Start and execute scan
1. Go throught initial scan wizard without verification till screen
where "Start scan" is possible.
2. Start scan
3. Verifay that scan is started.
4. Wait during timeout that scan is finnished.
Args:
timeout -- timeout of scan result waiting in sec
Returns: True scan is executed, False is scan is not executed as expectd by
any reason
"""
self._go_through_wizard(CAM_SCAN_WIZARD.LNB_FREQ)
send_key("FWD")
println("Wait for scan result screen.")
result, status = wait_for(CAM_SCAN_WIZARD.SCAN_RESULT, timeout, 5)
if result:
println("VERIFICATION PASSED: Scan is executed.")
return result and True
else:
println(("VERIFICATION FAILED: Scan is not finished during {} "
"sec.\n \t - UI sate is {}").format(timeout, status))
return result and False
def _open_scan_wizard(self):
println("\nWait for Interactive DCM request.")
result, status = wait_for("Immediately", 2, 2)
if result:
selected, status = select_on_screen(DCM_OPTIONS, "Immediately")
if selected:
send_key("OK")
return True
else:
print("DEBUG: Open Scan Wizard Failed")
return False
def _open_scan_wizard(self):
println("\nWait for CAM scan request.")
result, status = wait_for("Immediately", 2, 2)
print(FRONTEND.SEARCH_CAM_SCREEN)
if result:
selected, status = select_on_screen(DCM_OPTIONS, "Immediately")
if selected:
send_key("OK")
return True
else:
print("DEBUG: Open Scan Wizard Failed")
return False
def _set_presettings(self, settings):
println("\nSet scan settings.")
self._go_through_wizard(AUTO_SCAN_WIZARD.FIRST_SCREEN)
result, status = select_on_screen(START_AUTO_SCAN,
'Change search settings')
send_key("OK")
result, status = wait_for(AUTO_SCAN_WIZARD.SIGNAL_SOURCE, 5, 1)
if result:
return self._set_settings(settings)
else:
println("VERIFICATION FAILED: Scan settings cannot be set.")
self._close_scan_wizard()
return False
def _close_scan_wizard(self):
""" Close initial scan wizard in fastest way.
Intial scan wizard can be closed in different way:
1. Cancel scan
2. Close wizard from scan result screen
3. Close wizard from network configuration screen
4. Close wizard from software update screen
If current screen is not a screen where wizard can be closed, then >>
will be pressed.
Reset_to_initial_state() will be called if wizard is not closed from firts attempt,
if wizard id cycled, if tV doesn't react on key pressing.
Returns: True if wizard is closed/ False otherwise
"""
forward = True
println("\nClose cam scan wizard")
initial_status = get_status()
while forward:
current_status = get_status()
if CAM_SCAN_WIZARD.SCAN_RESULT in current_status:
time.sleep(2)
send_key("EXIT")
time.sleep(2)
send_key("EXIT")
time.sleep(2)
forward = False
elif CAM_SCAN_WIZARD.STATIONS_SORTING in current_status:
result, status = wait_for(CAM_SCAN_WIZARD.SCAN_RESULT, 30, 5)
if result:
time.sleep(2)
send_key("EXIT")
time.sleep(2)
send_key("EXIT")
time.sleep(2)
forward = False
else:
println(
"VERIFICATION FAILED: Scan is not finished during 30sec."
)
return False
else:
if not send_key_with_verification('FWD'):
println("#ERROR: TV doesn't react on key >>.")
forward = False
elif get_status() == initial_status:
println("#ERROR: UI is cycled.")
forward = False
result = check_all_wizard_closed()
println("DEBUG: RESULT IS {}".format(result))
if not result:
println("#VERIFICATION FAILED: wizard is not closed")
return False
else:
return True
def _close_scan_wizard(self):
""" Close auto scan wizard in fastest way.
Returns: True if wizard is closed/ False otherwise
"""
forward = True
println("\nClose auto scan wizard")
initial_status = get_status()
while forward:
current_status = get_status()
if AUTO_SCAN_WIZARD.FIRST_SCREEN in current_status:
forward = False
#one 'exit' is workaround to close additional messages
send_key("EXIT")
time.sleep(2)
send_key("EXIT")
time.sleep(2)
elif AUTO_SCAN_WIZARD.SCAN in current_status:
forward = False
#one 'exit' is workaround to close additional messages
send_key("EXIT")
time.sleep(2)
send_key("EXIT")
time.sleep(2)
send_key("EXIT")
time.sleep(2)
else:
if not send_key_with_verification('FWD'):
println("#ERROR: TV doesn't react on key >>.")
forward = False
elif get_status() == initial_status:
println("#ERROR: UI is cycled.")
forward = False
if not check_all_wizard_closed():
println("#VERIFICATION FAILED: wizard is not closed")
return False
else:
return True
def _start_scan(self, timeout=180):
""" Start and execute scan
1. Go throught initial scan wizard without verification till screen
where "Start scan" is possible.
2. Start scan
3. Verifay that scan is started.
4. Wait during timeout that scan is finnished.
Args:
timeout -- timeout of scan result waiting in sec
Returns: True scan is executed, False is scan is not executed as expectd by
any reason
"""
self._go_through_wizard(AUTO_SCAN_WIZARD.FIRST_SCREEN)
result, status = select_on_screen(START_AUTO_SCAN,
'Start search/update')
if not result:
println("VERIFICATION FAILED: Auto scan cannot be started.")
return False
send_key("OK")
result, status = wait_for(AUTO_SCAN_WIZARD.SCAN, 10, 2)
if result:
result = True
println("VERIFICATION PASSED: Auto scan is started.")
else:
result = False
println(("VERIFICATION FAILED: Auto scan is not started during "
"10sec.\n \t - UI sate is {}").format(status))
result, status = wait_for(AUTO_SCAN_WIZARD.SCAN_RESULT, timeout, 2)
if result:
println("VERIFICATION PASSED: Scan is executed.")
return result and True
else:
println(("VERIFICATION FAILED: Scan is not finished during {} "
"sec.\n \t - UI sate is {}").format(timeout, status))
return result and False
def _close_scan_wizard(self):
""" Close initial scan wizard in fastest way.
Intial scan wizard can be closed in different way:
1. Cancel scan
2. Close wizard from scan result screen
3. Close wizard from network configuration screen
4. Close wizard from software update screen
If current screen is not a screen where wizard can be closed, then >>
will be pressed.
Reset_to_initial_state() will be called if wizard is not closed from firts attempt,
if wizard id cycled, if tV doesn't react on key pressing.
Returns: True if wizard is closed/ False otherwise
"""
forward = True
println("\nClose initial scan wizard")
initial_status = get_status()
println("DEBUG: PRINTING GET STATUS %s" % initial_status)
while forward:
current_status = get_status()
if INITIAL_SCAN_WIZARD.LICENCE in current_status:
println("INFO: Licence agreement is displayed.")
send_key_with_verification('OK')
elif INITIAL_SCAN_WIZARD.NETWORK_CONFIGURATION in current_status:
forward = False
selected, status = select_on_screen(
NETWORK_CONFIGURATION,
'Do not configure or configure later')
if selected:
send_key("OK")
time.sleep(2)
send_key("EXIT")
time.sleep(2)
send_key("EXIT")
time.sleep(2)
else:
println(("#ERROR: Initial scan wizard cannot be closed "
"from '{}' screen.").format(
INITIAL_SCAN_WIZARD.NETWORK_CONFIGURATION))
println("INFO: UI status - {}".format(status))
elif INITIAL_SCAN_WIZARD.START_SCAN in current_status:
forward = False
selected, status = select_on_screen(START_SCAN, 'Cancel')
if selected:
send_key("OK")
time.sleep(2)
send_key("EXIT")
time.sleep(2)
send_key("EXIT")
time.sleep(2)
else:
println(("#ERROR: Initial scan wizard cannot be closed "
"from '{}' screen.").format(
INITIAL_SCAN_WIZARD.START_SCAN))
print("INFO: UI status - {}".format(status))
open_main_menu()
elif INITIAL_SCAN_WIZARD.SCAN_RESULT in current_status:
forward = False
println("DEBUG: BEFORE GET STATUS")
send_key("EXIT")
time.sleep(2)
send_key("EXIT")
time.sleep(2)
elif INITIAL_SCAN_WIZARD.INFORM_ABOUT_NEW_SOFTWARE in current_status:
forward = False
send_key("EXIT")
time.sleep(2)
#workaround: additional pressing 'back' to close any message if displayed
send_key("EXIT")
time.sleep(2)
else:
if not send_key_with_verification('FWD'):
println("#ERROR: TV doesn't react on key >>.")
forward = False
elif get_status() == initial_status:
println("#ERROR: UI is cycled.")
forward = False
println("DEBUG: AFTER GET_STATUS")
result = check_all_wizard_closed()
println("DEBUG: RESULT IS {}".format(result))
if not result:
println("#VERIFICATION FAILED: wizard is not closed")
return False
else:
return True