class SetTimeHandle():
def __init__(self,driver,screen_x,screen_y):
self.driver = driver
self.swip = Swip(screen_x, screen_y, driver)
self.setTime_p = SetTimePage(driver)
self.myDevice_p = MyDevicePage(driver)
self.loger = UserLog().get_logger()
#输入要设置的时间
def enter_setTime(self,time):
# sleep(10)
# ele = self.myDevice_p.get_meat_thermometer()
# ele.click()
# 进入定时设置界面
sleep(8)
ele1 = self.myDevice_p.get_setTime_element()
ele1.click()
sleep(2)
ele2 = self.setTime_p.get_delete_element()
if ele2 != None:
ele2.click()
self.set_hours()
sleep(1)
self.set_min()
sleep(1)
self.set_second()
sleep(1)
ele3 = self.setTime_p.get_finish_element()
ele3.click()
def set_hours(self):
start_x = 301
start_y = 1579
self.swip.swipe_up(85,start_x,start_y)
def set_min(self):
start_x = 680
start_y = 1579
self.swip.swipe_up(85, start_x, start_y)
def set_second(self):
start_x = 1059
start_y = 1579
self.swip.swipe_up(85, start_x, start_y)
class LightingEffectsLibrary():
dataList = ''
def __init__(self, platformVersion, mobileName, device, com, bps, timeout):
desired_caps = {}
desired_caps['platformName'] = 'Android'
desired_caps['platformVersion'] = platformVersion
desired_caps['deviceName'] = mobileName
desired_caps['appPackage'] = 'com.govee.home'
# desired_caps['app'] = 'F:// debug.apk'
desired_caps['appActivity'] = 'com.govee.home.HomeActivity'
desired_caps['noReset'] = 'true'
desired_caps['automationName'] = 'Uiautomator2'
desired_caps['adbExecTimeout'] = 200000
self.driver = webdriver.Remote('http://127.0.0.1:4723/wd/hub',
desired_caps)
# 获取屏幕分辨率
self.screen_x = self.driver.get_window_size()['width'] # 屏幕宽度--单位是px
self.screen_y = self.driver.get_window_size()['height'] # 屏幕的高度-单位是px
self.swip = Swip(self.screen_x, self.screen_y, self.driver)
# self.myDevice_p = MyDevicePage(self.driver)
self.user_log = UserLog()
self.loger = self.user_log.get_logger()
# self.h6199_p = H6199MainPage(self.driver)
self.device = device
self.start = True
#创建串口
self.port = com
self.bps = bps
self.timeout = timeout
global Ret
try:
# 打开串口，并得到串口对象
self.main_engine = serial.Serial(self.port,
self.bps,
timeout=self.timeout)
self.main_engine.flushInput() # 清空缓冲区
# 判断是否打开成功
if (self.main_engine.is_open):
Ret = True
except Exception as e:
print("---异常---：", e)
#进入设备主页
def enter_H6199_1540_main_face(self):
try:
WebDriverWait(
self.driver, 20, 0.5
).until(lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)).is_displayed()
except:
print('进入设备详情页失败')
else:
sleep(2)
self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device).click()
#颜色切换
def switch_color(self, times):
self.enter_H6199_1540_main_face()
n = 0
sleep(4)
try:
WebDriverWait(
self.driver, 30,
0.5).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"灯效库\")")).is_displayed()
except:
print('进入设备详情页失败')
else:
sleep(2)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"灯效库\")").click()
try:
WebDriverWait(
self.driver, 20,
0.5).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"灯效库\")")).is_displayed()
except:
print('进入灯效库页失败')
else:
sleep(3)
for k in range(7):
for j in range(3, 11, 2):
for i in range(5):
# 开始操作
sleep(1)
self.driver.find_element_by_xpath(
'//*[@resource-id="com.govee.home:id/rv_data"]/android.widget.RelativeLayout[%s]'
% j +
'/androidx.recyclerview.widget.RecyclerView[1]/android.widget.LinearLayout[%s]'
% (i + 1)).click()
sleep(2)
# 监测串口日志
check_result = self.com_log_check(self.dataList)
if check_result:
n += 1
#向上滑
self.swip.swipe_up(862)
sleep(2)
self.swip.swipe_up(839)
sleep(2)
self.loger.info('颜色切换[%s]次，' % times + '成功了[%s]次！！！！！！！！' % n)
#监测串口日志
def com_log_check(self, dataList):
start = len(dataList) - 300
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 10) # 以冒号进行分割
#打印串口日志
self.loger.info('本次操作后蓝牙日志：' + str(strlist))
for i in range(len(strlist)):
sl = strlist[i][len(strlist[i]) - 7:len(strlist[i])]
if sl == 'blesend':
print('blesend:' + strlist[i + 1])
self.loger.info('蓝牙回复结果：blesend:' + str(strlist[i + 1]))
if strlist[i + 1][4] == '0' and strlist[i + 1][5] == '0':
self.loger.info('本次颜色切换成功')
print('本次颜色切换成功')
return True
else:
self.loger.info('本次颜色切换失败')
print('本次颜色切换失败')
return False
# 截图
def screenshot(self, msg):
# 截图保存
now = time.strftime("%Y-%m-%d %H-%M-%S")
image_name = LOG_DIR + '/' + msg + " " + now + ".png"
self.driver.save_screenshot(image_name)
# 接收串口数据
def recv(self):
print("开始接收数据：")
while True:
try:
count = self.main_engine.inWaiting() # 获取串口缓冲区数据
if count != 0:
data = self.main_engine.read(
self.main_engine.in_waiting).decode(
"gbk") # 读出串口数据，数据采用gbk编码
time.sleep(0.1) # 延时0.1秒，免得CPU出问题
self.dataList += data
except Exception as e:
print("异常报错：", e)
class H6087MainHandle():
dataList = ''
def __init__(self, driver, device, com, bps, timeout, com2, bps2, bytesize,
stopbits, Ret1, Ret2):
self.device = device
self.driver = driver
self.Ret1 = Ret1
self.Ret2 = Ret2
#日志
self.loger = logging.getLogger(
'H6087MainCase.sub.module') #多模块使用logging
# 获取屏幕分辨率
self.screen_x = self.driver.get_window_size()['width'] # 屏幕宽度--单位是px
self.screen_y = self.driver.get_window_size()['height'] # 屏幕的高度-单位是px
self.swip = Swip(self.screen_x, self.screen_y, self.driver)
#选择设备
self.ch_device = ChooesDevice(self.device, self.driver)
#打印串口
self.port = com
self.bps = bps
self.timeout = timeout
self.start = True
#截图路径
self.image_path = setting.TEST_ERROR_Image
# global Ret1
try:
# 打开串口，并得到串口对象
self.main_engine = serial.Serial(self.port,
self.bps,
timeout=self.timeout)
self.main_engine.flushInput() # 清空缓冲区
# 判断是否打开成功
if (self.main_engine.is_open):
self.Ret1 = True
except Exception as e:
print("---异常---：", e)
#控制串口
self.port2 = com2
self.bps2 = bps2
self.bytesize = bytesize
self.stopbits = stopbits
# global Ret2
try:
# 打开串口，并得到串口对象
self.main_engine2 = serial.Serial(self.port2,
self.bps2,
timeout=self.timeout,
bytesize=self.bytesize,
stopbits=self.stopbits)
# 判断是否打开成功
if (self.main_engine2.is_open):
self.Ret2 = True
#初始化继电器类
self.relay_h = RelayHandle(self.main_engine2)
except Exception as e:
print("---异常---：", e)
#设备配网
def connect_H6087(self, skip_wifi, times):
if (self.Ret1 and self.Ret2):
#功能线程运行
threading.Thread(target=self.add_device,
name='add_device',
args=(
skip_wifi,
times,
)).start()
#日志线程运行
threading.Thread(
target=self.recv,
name='recvData',
).start()
else:
print("创建串口失败")
#模式切换
def modeChange_H6087(self):
if (self.Ret1 and self.Ret2):
#功能线程运行
threading.Thread(
target=self.mode_change,
name='mode_change',
).start()
#日志线程运行
threading.Thread(
target=self.recv,
name='recvData',
).start()
else:
print("创建串口失败")
def mode_change(self):
n = 0
#进入设备详情页
try:
WebDriverWait(
self.driver, 120, 1
).until(lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)).is_displayed()
except:
self.loger.info('没有找到该设备，请先添加设备')
else:
self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device).click()
#DIY模式切换
WebDriverWait(self.driver, 20,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"DIY\")")).click()
#开始DIY模式循环切换
while True:
# try:
# #DIY-流水
# WebDriverWait(self.driver, 10, 1).until(
# lambda x: x.find_element_by_android_uiautomator(
# "new UiSelector().text(\"流水\")")).click()
# self.loger.info('切换流水diy模式')
# print('切换流水diy模式')
# sleep(3)
# # 关机
# self.relay_h.once_click()
# self.loger.info('物理按键，控制设备关机')
# print('物理按键，控制设备关机')
# sleep(3)
# # 开机
# self.relay_h.once_click()
# self.loger.info('物理按键，控制设备开机')
# print('物理按键，控制设备开机')
#
# # DIY-灿烂
# WebDriverWait(self.driver, 10, 1).until(
# lambda x: x.find_element_by_android_uiautomator(
# "new UiSelector().text(\"灿烂\")")).click()
# self.loger.info('切换灿烂diy模式')
# print('切换灿烂diy模式')
# sleep(3)
# # 关机
# self.relay_h.once_click()
# self.loger.info('物理按键，控制设备关机')
# print('物理按键，控制设备关机')
# sleep(3)
# # 开机
# self.relay_h.once_click()
# self.loger.info('物理按键，控制设备开机')
# print('物理按键，控制设备开机')
#
# # DIY-四季
# WebDriverWait(self.driver, 10, 1).until(
# lambda x: x.find_element_by_android_uiautomator(
# "new UiSelector().text(\"四季\")")).click()
# self.loger.info('切换四季diy模式')
# print('切换四季diy模式')
# sleep(3)
# # 关机
# self.relay_h.once_click()
# self.loger.info('物理按键，控制设备关机')
# print('物理按键，控制设备关机')
# sleep(3)
# # 开机
# self.relay_h.once_click()
# self.loger.info('物理按键，控制设备开机')
# print('物理按键，控制设备开机')
#
# # DIY-摇摆
# WebDriverWait(self.driver, 10, 1).until(
# lambda x: x.find_element_by_android_uiautomator(
# "new UiSelector().text(\"摇摆\")")).click()
# self.loger.info('切换摇摆diy模式')
# print('切换摇摆diy模式')
# sleep(3)
# # 关机
# self.relay_h.once_click()
# self.loger.info('物理按键，控制设备关机')
# print('物理按键，控制设备关机')
# sleep(3)
# # 开机
# self.relay_h.once_click()
# self.loger.info('物理按键，控制设备开机')
# print('物理按键，控制设备开机')
#
# n += 1
# self.loger.info('第[%s]循环次切换DIY模式结束' % n)
# print('第[%s]循环次切换DIY模式结束' % n)
# except Exception as e:
# self.loger.info(e)
# self.loger.info('DIY模式切换失败')
# print('DIY模式切换失败')
try:
# 音乐模式
try:
WebDriverWait(self.driver, 60, 0.2).until(
EC.element_to_be_clickable((By.ID, 'mode_1_icon')))
except:
self.loger.info('蓝牙连接失败')
self.screenshot('蓝牙连接失败')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")").click()
else:
WebDriverWait(self.driver, 10).until(
lambda x: x.find_element_by_id("mode_1_icon")).click()
if self.check_ble_status():
self.loger.info('切换音乐模式后，蓝牙连接正常')
sleep(2)
self.loger.info('再次物理点击颜色按键')
self.relay_h.once_click()
else:
self.loger.info('切换音乐模式后，蓝牙断连')
self.screenshot('切换音乐模式后，蓝牙断连')
WebDriverWait(self.driver, 60, 0.5).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")")).click()
sleep(3)
# 颜色模式
try:
WebDriverWait(self.driver, 60, 0.2).until(
EC.element_to_be_clickable((By.ID, 'mode_2_icon')))
except:
self.loger.info('蓝牙连接失败')
self.screenshot('蓝牙连接失败')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")").click()
else:
WebDriverWait(self.driver, 10).until(
lambda x: x.find_element_by_id("mode_2_icon")).click()
if self.check_ble_status():
self.loger.info('切换颜色模式后，蓝牙连接正常')
sleep(2)
self.loger.info('再次物理点击颜色按键')
self.relay_h.once_click()
else:
self.loger.info('切换颜色模式后，蓝牙断连')
self.screenshot('切换颜色模式后，蓝牙断连')
WebDriverWait(self.driver, 60, 0.5).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")")).click()
sleep(3)
# 场景模式
try:
WebDriverWait(self.driver, 60, 0.2).until(
EC.element_to_be_clickable((By.ID, 'mode_3_icon')))
except:
self.loger.info('蓝牙连接失败')
self.screenshot('蓝牙连接失败')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")").click()
else:
WebDriverWait(self.driver, 10).until(
lambda x: x.find_element_by_id("mode_3_icon")).click()
if self.check_ble_status():
self.loger.info('切换场景模式后，蓝牙连接正常')
sleep(2)
self.loger.info('再次物理点击颜色按键')
self.relay_h.once_click()
else:
self.loger.info('切换场景模式后，蓝牙断连')
self.screenshot('切换场景模式后，蓝牙断连')
WebDriverWait(self.driver, 60, 0.5).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")")).click()
# DIY模式
sleep(3)
try:
WebDriverWait(self.driver, 60, 0.2).until(
EC.element_to_be_clickable((By.ID, 'mode_4_icon')))
except:
self.loger.info('蓝牙连接失败')
self.screenshot('蓝牙连接失败')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")").click()
else:
WebDriverWait(self.driver, 10).until(
lambda x: x.find_element_by_id("mode_4_icon")).click()
if self.check_ble_status():
self.loger.info('切换DIY模式后，蓝牙连接正常')
# self.loger.info('----------------------------------')
sleep(2)
self.loger.info('再次物理点击颜色按键')
self.relay_h.once_click()
else:
self.loger.info('切换DIY模式后，蓝牙断连')
self.screenshot('切换DIY模式后，蓝牙断连')
WebDriverWait(self.driver, 60, 0.5).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")")).click()
except Exception as e:
self.loger.info(e)
self.loger.info('模式切换失败')
print('模式切换失败')
#检查蓝牙状态
def check_ble_status(self):
try:
WebDriverWait(
self.driver, 5,
0.5).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"已连接\")")).is_displayed()
except:
return False
else:
return True
#设备配网
#1、次数 2、是否跳过WiFi设置
def add_device(self, skip_wifi, times):
result = [0, 0]
m = 0
app_check = False
com_check = False
for i in range(times):
# 选择设备类型
try:
self.ch_device.chooes_device()
m += 1
# 扫描蓝牙
while True:
try:
WebDriverWait(self.driver, 120, 1).until(
lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)
).is_displayed()
except:
self.loger.info('蓝牙扫描失败，重新扫描')
self.screenshot('蓝牙扫描失败')
try:
WebDriverWait(
self.driver, 60,
1).until(lambda x: x.
find_element_by_android_uiautomator(
"new UiSelector().text(\"重新扫描\")")
).is_displayed()
except:
self.loger.info('重新扫描按钮不可点击')
else:
self.loger.info('点击重新扫描按钮')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新扫描\")").click()
else:
self.loger.info('蓝牙扫描成功')
sleep(3)
ele = self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)
sleep(1)
ele.click()
break
# 进入配对界面，点击设备开关按键
try:
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"配对\")")).is_displayed()
except:
self.loger.info('进入蓝牙配对界面失败')
# 蓝牙没有连接成功时，重新连接，直到成功
while True:
try:
WebDriverWait(
self.driver, 10,
1).until(lambda x: x.
find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' %
self.device)).is_displayed()
except:
self.loger.info('连接成功')
break
else:
self.loger.info('重新连接')
self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' %
self.device).click()
else:
self.loger.info('进入蓝牙配对界面成功')
result = self.connect_ble_wifi(skip_wifi, result[0], result[1])
except Exception as e:
print(e)
self.loger.info(e)
continue
self.start = False
self.sum = 0
if skip_wifi:
self.sum = int(result[1])
else:
self.sum = int(result[0])
print('[%s]' % self.device + '设备配网[%s]次，' % m +
'成功了[%s]次，' % self.sum + '，配网成功率%s' % (self.sum / m * 100) + '%')
self.loger.info('[%s]' % self.device + '设备配网[%s]次，' % m +
'成功了[%s]次，' % self.sum + '，配网成功率%s' %
(self.sum / m * 100) + '%')
def connect_ble_wifi(self, skip_wifi, n, k):
result_list = []
# 等待时间
wait_time = random.randint(1, 25) #随机生成一个[1,25]之间的整数，包括1、25
sleep(wait_time)
print('等待了%s秒' % wait_time)
self.loger.info('等待了%s秒' % wait_time)
self.relay_h.once_click()
# 蓝牙连接成功，点击完成
try:
WebDriverWait(
self.driver, 80,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")")).is_displayed()
except:
self.loger.info('蓝牙配对失败')
self.screenshot('蓝牙配对失败')
print('蓝牙配对失败')
while True:
try:
WebDriverWait(self.driver, 80, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")")).is_displayed()
except:
self.loger.info('再次配对')
self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device).click()
sleep(2)
self.relay_h.once_click()
else:
self.loger.info('再次配对成功')
break
else:
# 点击完成
self.loger.info('蓝牙配对成功')
print('蓝牙配对成功')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
# 进入WiFi配置界面
try:
WebDriverWait(
self.driver, 120,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")")).is_displayed()
except:
self.loger.info('wifi设置页面加载失败，跳过WiFi设置')
print('wifi设置页面加载失败，跳过WiFi设置')
self.screenshot('wifi设置页面加载失败')
# 跳过WiFi设置
self.skip_wifiSetting()
#进入设备详情页
# self.enter_gateway_detial()
# 删除设备
self.delete_lempDevice()
else:
# 是否跳过WiFi设置
if skip_wifi:
self.loger.info('跳过WiFi设置')
print('跳过WiFi设置')
# 跳过WiFi设置
self.skip_wifiSetting()
k += 1
else:
# 判断设备是否添加成功
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
try:
WebDriverWait(self.driver, 180, 0.1).until(
EC.presence_of_element_located(
(By.XPATH, '//*[contains(@text,"连接成功")]')))
except:
print('WiFi连接失败')
self.loger.info('WiFi连接失败')
self.screenshot('WiFi连接失败')
# continue
# wifi连接失败时点击跳过
self.skip_wifiSetting()
else:
n += 1
print('WiFi连接成功')
self.loger.info('WiFi连接成功')
print('第[%s]次' % n + '配网成功')
self.loger.info('第[%s]次' % n + '配网成功')
sleep(1)
# 点击确定
# self.driver.find_element_by_android_uiautomator("new UiSelector().text(\"确定\")").click()
result_list.clear()
result_list.append(n)
result_list.append(k)
# 删除设备
self.delete_lempDevice()
return result_list
# 删除设备
def delete_lempDevice(self):
# btn_settting = self.driver.find_element_by_id("btn_setting")
try:
WebDriverWait(
self.driver,
10).until(lambda x: x.find_element_by_id("btn_setting"))
except:
print('没有设置按钮')
self.loger.info('没有设置按钮')
else:
sleep(1)
self.driver.find_element_by_id("btn_setting").click()
sleep(2)
# 向下滑动
self.swip.swipe_up(600)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"删除设备\")").click()
sleep(1)
yes = self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"是\")")
yes.click()
sleep(1)
print('删除设备')
self.loger.info('删除设备')
# 刷新首页
self.swip.swipe_down(600)
#跳过WiFi设置
def skip_wifiSetting(self):
sleep(1)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"跳过\")").click()
sleep(1)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"确认\")").click()
sleep(1)
# # 点击确定
# self.driver.find_element_by_android_uiautomator("new UiSelector().text(\"确定\")").click()
# 监测蓝牙配对日志
def com_bluetooth_adddevice_log_check(self, dataList):
start = len(dataList) - 2500
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 50) # 以冒号进行分割
# 打印串口日志
self.loger.info('配网日志：' + str(strlist))
print('配网日志：' + str(strlist))
sl = '33b200'
if str(strlist).find(sl) >= 0:
self.loger.info('本次配网日志校验成功')
print('本次配网日志校验成功')
return True
else:
print('本次配网日志校验失败')
self.loger.info('本次配网日志校验失败')
return False
#监测蓝牙控制日志
def com_bluetooth_normal_log_check(self,
dataList,
mlen,
option_type,
sl=None):
start = len(dataList) - mlen
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 50) # 以冒号进行分割
#打印串口日志
self.loger.info('本次操作后蓝牙日志：' + str(strlist))
print('本次操作后蓝牙日志：' + str(strlist))
if option_type == 'mode_switch':
for i in range(len(strlist)):
sl = strlist[i][len(strlist[i]) - 7:len(strlist[i])]
if sl == 'blesend':
print('blesend:' + strlist[i + 1])
self.loger.info('蓝牙回复结果：blesend:' + str(strlist[i + 1]))
if strlist[i + 1][0] == '3' and strlist[
i + 1][4] == '0' and strlist[i + 1][5] == '0':
self.loger.info('本次蓝牙下操作成功')
print('本次蓝牙下操作成功')
return True
else:
self.loger.info('本次蓝牙下操作失败')
print('本次蓝牙下操作失败')
return False
else:
check = False
for i in range(len(strlist)):
if str(strlist[i]).find(sl) >= 0:
self.loger.info(strlist[i])
print(strlist[i])
check = True
break
else:
check = False
return check
#监测普通WiFi日志
def com_wifi_normal_log_check(self, dataList, sl, option_type):
if option_type == 'on_off_switch':
start = len(dataList) - 3400
elif option_type == 'leve_switch':
start = len(dataList) - 1400
else:
start = len(dataList) - 2200
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 50) # 以冒号进行分割
# 打印串口日志
self.loger.info('本次操作后日志：' + str(strlist))
for i in range(len(strlist)):
if strlist[i].find(sl) >= 0:
print('串口日志：' + strlist[i])
self.loger.info('串口日志：' + strlist[i])
return strlist[i]
# 监测WiFi配网日志
def com_wifi_adddevice_log_check(self, dataList):
start = len(dataList) - 8000
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 80) # 以冒号进行分割
# 打印串口日志
self.loger.info('wifi联网日志：' + str(strlist))
print('wifi联网日志：' + str(strlist))
sl = 'IOT_BLE_WIFI_CONNECT_SUC'
if str(strlist).find(sl) >= 0:
print('本次WiFi连接成功')
return True
else:
print('本次WiFi连接失败')
return False
# 接收串口数据
def recv(self):
if self.start:
print("开始接收数据：")
else:
print("测试完毕，停止接收数据：")
while self.start:
try:
count = self.main_engine.inWaiting() # 获取串口缓冲区数据
if count != 0:
data = self.main_engine.read(
self.main_engine.in_waiting).decode(
"gbk") # 读出串口数据，数据采用gbk编码
# print(time.strftime("%Y-%m-%d %H-%M-%S"), " --- recv --> ") # 打印一下子
time.sleep(0.1) # 延时0.1秒，免得CPU出问题
self.dataList += data
data = data.replace("\r", "")
self.loger.info(data)
except Exception as e:
print("异常报错：", e)
# 截图
def screenshot(self, msg):
# 截图保存
now = time.strftime("%Y-%m-%d %H-%M-%S")
image_name = self.image_path + '/' + msg + " " + now + ".png"
self.driver.save_screenshot(image_name)
#
#
# if __name__ == '__main__':
# platformVersion = '10' #安卓系统版本
# mobileName = 'R58M36MWZ1B' #手机名称
# device = 'H7130_C583' #设备名称
# times = 100 #测试次数
# Ret1 = False #日志打印串口是否创建成功标志
# Ret2 = False #控制串口是否创建成功标志
# com1 = 'com13'
# bps = 115200
# timeout = 0.5
# com2 = "com12"
# bps2 = 9600
# timex = 0.5
# bytesize = 8
# stopbits = 1
# ms = Humidifier2(platformVersion,mobileName,device,com1, bps, timeout,com2,bps2,bytesize,stopbits)
# if(Ret1 and Ret2):
# #功能线程运行
# # threading.Thread(target=ms.add_device,args=(times,)).start()
# # threading.Thread(target=ms.leve_switch, args=(times,)).start()
# threading.Thread(target=ms.on_off_switch, args=(times,)).start()
# #日志线程运行
# threading.Thread(target=ms.recv,).start()
# # ms.add_device(times)
# else:
# print("创建串口失败")
class WifiConnect():
def __init__(self, driver, deviceName, myloger, screen_x, screen_y):
self.driver = driver
self.device = deviceName
# 日志
self.loger = myloger
# 截图路径
self.image_path = setting.TEST_ERROR_Image
self.swip = Swip(screen_x, screen_y, self.driver)
#wifi连接
def wifi_connect(self, skip_wifi, n, k):
result_list = []
# 进入WiFi配置界面
try:
WebDriverWait(
self.driver, 120,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")")).is_displayed()
except:
self.loger.info('wifi设置页面加载失败，跳过WiFi设置')
print('wifi设置页面加载失败，跳过WiFi设置')
self.screenshot('wifi设置页面加载失败')
# 跳过WiFi设置
self.skip_wifiSetting()
# 进入设备详情页
# self.enter_gateway_detial()
# 删除设备
self.delete_lempDevice()
else:
# 是否跳过WiFi设置
if skip_wifi:
self.loger.info('跳过WiFi设置')
print('跳过WiFi设置')
# 跳过WiFi设置
self.skip_wifiSetting()
k += 1
else:
# 判断设备是否添加成功
sleep(1)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
sleep(0.5)
self.loger.info('点击了完成按钮')
self.screenshot('点击了完成按钮')
try:
WebDriverWait(self.driver, 180, 0.1).until(
EC.presence_of_element_located(
(By.XPATH, '//*[contains(@text,"连接成功")]')))
except:
print('WiFi连接失败')
self.loger.info('WiFi连接失败')
self.screenshot('WiFi连接失败')
# continue
# wifi连接失败时点击跳过
self.skip_wifiSetting()
else:
n += 1
print('WiFi连接成功')
self.loger.info('WiFi连接成功')
print('第[%s]次' % n + '配网成功')
self.loger.info('第[%s]次' % n + '配网成功')
sleep(1)
# 点击确定
# self.driver.find_element_by_android_uiautomator("new UiSelector().text(\"确定\")").click()
result_list.clear()
result_list.append(n)
result_list.append(k)
# 删除设备
self.delete_lempDevice()
return result_list
# 删除设备
def delete_lempDevice(self):
# btn_settting = self.driver.find_element_by_id("btn_setting")
try:
WebDriverWait(
self.driver,
10).until(lambda x: x.find_element_by_id("btn_setting"))
except:
print('没有设置按钮')
self.loger.info('没有设置按钮')
else:
sleep(1)
self.driver.find_element_by_id("btn_setting").click()
sleep(2)
# 向下滑动
self.swip.swipe_up(600)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"删除设备\")").click()
sleep(1)
yes = self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"是\")")
yes.click()
sleep(1)
print('删除设备')
self.loger.info('删除设备')
# 刷新首页
self.swip.swipe_down(600)
# 跳过WiFi设置
def skip_wifiSetting(self):
sleep(1)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"跳过\")").click()
sleep(1)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"确认\")").click()
sleep(1)
# # 点击确定
# self.driver.find_element_by_android_uiautomator("new UiSelector().text(\"确定\")").click()
# 截图
def screenshot(self, msg):
# 截图保存
now = time.strftime("%Y-%m-%d %H-%M-%S")
image_name = self.image_path + '/' + msg + " " + now + ".png"
self.driver.save_screenshot(image_name)
class DingDingMainHandle():
def __init__(self, driver):
self.driver = driver
# 获取屏幕分辨率
self.screen_x = self.driver.get_window_size()['width'] # 屏幕宽度--单位是px
self.screen_y = self.driver.get_window_size()['height'] # 屏幕的高度-单位是px
self.swip = Swip(self.screen_x, self.screen_y, self.driver)
def learn(self):
threading.Thread(target=self.learn_center, ).start()
def learn_center(self):
# 点击智岩科技
WebDriverWait(self.driver, 60, 0.5).until(
EC.presence_of_element_located(
(By.XPATH,
'//android.widget.FrameLayout[2]/android.widget.ImageView[1]'
))).click()
# 进入云课堂
WebDriverWait(self.driver, 60, 0.5).until(
EC.presence_of_element_located((
By.XPATH,
'//android.webkit.WebView/android.view.View[1]/android.view.View[3]/android.view.View[1]/android.view.View[1]/android.view.View[4]/android.view.View[1]/android.view.View[2]/android.view.View[7]/android.view.View[1]'
))).click()
# 点击学习中心
sleep(10)
x = 534
y = 2840
try:
print('点击学习中心')
self.driver.tap([(x, y)])
except Exception as e:
print(e)
#选择类型
WebDriverWait(self.driver, 60, 0.5).until(
EC.presence_of_element_located((
By.XPATH,
'//android.webkit.WebView/android.view.View[1]/android.view.View[1]/android.widget.Image[2]'
))).click()
sleep(3)
try:
#视频
self.driver.tap([(720, 1380)])
#确定
sleep(1)
self.driver.tap([(720, 2700)])
except Exception as e:
print(e)
print('开始播放所有视频')
try:
for j in range(4, 28, 6):
self.click_screen(j)
for i in range(50):
sleep(8)
self.swip.swipe_down(50)
#返回视频列表
self.driver.find_element_by_id('back_icon').click()
#第二页
print('滑到第二页')
try:
sleep(3)
self.swip.swipe_up(800)
sleep(2)
self.swip.swipe_up(1000)
except Exception as e:
print(e)
sleep(3)
for j in range(7, 31, 6):
self.click_screen(j)
for i in range(50):
sleep(8)
self.swip.swipe_down(50)
#返回视频列表
self.driver.find_element_by_id('back_icon').click()
print('滑到第三页')
sleep(3)
try:
self.swip.swipe_up(300)
sleep(2)
self.swip.swipe_down(260)
sleep(3)
self.swip.swipe_up(800)
sleep(2)
self.swip.swipe_up(1000)
except Exception as e:
print(e)
sleep(1.5)
for j in range(7, 31, 6):
self.click_screen(j)
for i in range(70):
sleep(8)
self.swip.swipe_down(50)
#返回视频列表
self.driver.find_element_by_id('back_icon').click()
print('滑到第四页')
sleep(3)
try:
self.swip.swipe_up(300)
sleep(2)
self.swip.swipe_down(260)
sleep(3)
self.swip.swipe_up(800)
sleep(2)
self.swip.swipe_up(1000)
except Exception as e:
print(e)
sleep(1.5)
for j in range(7, 31, 6):
self.click_screen(j)
for i in range(70):
sleep(8)
self.swip.swipe_down(50)
#返回视频列表
self.driver.find_element_by_id('back_icon').click()
except Exception as e:
print(e)
# 点击播放
def click_screen(self, index):
try:
sleep(3)
WebDriverWait(self.driver, 5, 0.5).until(
EC.presence_of_element_located(
(By.XPATH,
'//android.webkit.WebView/android.view.View[%s]' %
(index)))).click()
# self.driver.find_element_by_xpath('//*[@resource-id="com.govee.home:id/rv_scenes"]/android.widget.RelativeLayout[%s]/android.widget.ImageView[1]'%(index + 1)).click()
print('开始播放')
sleep(2)
except Exception as e:
print(e)
class WIFISetHandle():
def __init__(self, driver, screen_x, screen_y, loger):
self.wifiSet_p = WiFiSetPage(driver)
self.driver = driver
self.loger = loger
self.swip = Swip(screen_x, screen_y, driver)
self.search_scan_handle = Search_Sacn_Device_Handle(driver, loger)
def connect_wifi(self, device_name):
sleep(4)
self.loger.info('开始添加H6199')
# 搜索6199设备型号
self.search_scan_handle.chooes_device('H6199')
# 扫描设备
self.search_scan_handle.scan_device(device_name)
sleep(3)
# 设置WIFI
# self.wifi_set_handle.set_wifi()
try:
WebDriverWait(
self.driver, 120,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")")).is_displayed()
except:
self.loger.info('检测摄像头第一次失败')
self.load_fail('检测摄像头第一次失败')
# 重试
sleep(1)
ele = self.driver.find_element_by_id('iv_choose')
sleep(1)
ele.click()
sleep(1)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重试\")").click()
try:
WebDriverWait(
self.driver, 120,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")")).is_displayed()
except:
self.loger.info('检测摄像头第二次失败,本次添加结束')
self.load_fail('检测摄像头第二次失败')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"跳过\")").click()
self.delete_lempDevice()
return False
else:
# 继续下面操作
result = self.continue_connect(device_name)
return result
else:
# 继续下面操作
result = self.continue_connect(device_name)
return result
# 摄像头检测成功后，继续下面操作
def continue_connect(self, device_name):
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
self.loger.info('检测摄像头成功,进入WIFI设置页成功')
# 校准设备
try:
WebDriverWait(self.driver, 120,
1).until(EC.element_to_be_clickable((By.ID, 'done')))
except:
self.loger.info('WIFI第一次连接失败')
self.load_fail('WIFI第一次连接失败')
# 重新连接
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
try:
WebDriverWait(self.driver, 120, 1).until(
EC.element_to_be_clickable((By.ID, 'done')))
except:
sleep(3)
self.loger.info('WIFI第二次连接失败，结束本次配网')
self.load_fail('WIFI第二次连接失败')
# 跳过
# self.driver.find_element_by_android_uiautomator("new UiSelector().text(\"跳过\")").click()
#返回
self.goback_deleteDevice()
self.loger.info('退出然后删除设备')
return False
else:
sleep(3)
# 检查WIFI是否连接成功
self.loger.info('WIFI连接成功')
self.load_fail('WIFI连接成功')
# 跳过
# self.driver.find_element_by_android_uiautomator("new UiSelector().text(\"跳过\")").click()
#返回
self.goback_deleteDevice()
self.loger.info('退出然后删除设备')
return True
else:
# 检查WIFI是否连接成功
self.loger.info('WIFI连接成功')
self.load_fail('WIFI连接成功')
# 跳过
# self.driver.find_element_by_android_uiautomator("new UiSelector().text(\"跳过\")").click()
# 返回
self.goback_deleteDevice()
self.loger.info('退出然后删除设备')
return True
#返回主页，删除设备
def goback_deleteDevice(self):
self.skip_wifiSet()
self.delete_lempDevice()
# 删除设备
def delete_lempDevice(self):
try:
WebDriverWait(self.driver, 120, 1).until(
EC.element_to_be_clickable((By.ID, 'btn_setting')))
except:
self.loger.info('没有设置按钮')
else:
self.driver.find_element_by_id('btn_setting').click()
sleep(3)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"删除设备\")").click()
sleep(1)
yes = self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"是\")")
yes.click()
sleep(1)
# 刷新首页
self.swip.swipe_down(600)
sleep(3)
def check(self):
try:
WebDriverWait(
self.driver, 120,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"删除设备\")")).is_displayed()
except:
self.load_fail('WiFi连接失败截图')
btn_settting = self.driver.find_element_by_id("btn_back")
sleep(1)
btn_settting.click()
return False
else:
self.load_fail('WiFi连接成功截图')
return True
#检测WiFi连接Toast
def check_toast(self):
# 用于生成xpath定位 相当于 "//*[@text='没有找到用户名或密码']"
toast_message = "设备Wi-Fi连接成功"
message = '//*[@text=\'{}\']'.format(toast_message)
# 获取toast提示框内容
toast_element = WebDriverWait(
self.driver, 60,
0.2).until(lambda x: x.find_element_by_xpath(message))
print(toast_element.text)
#添加断言
# if toast_element.text == toast_message:
# self.load_fail('WiFi连接成功截图')
# return True
# else:
# self.load_fail('WiFi连接失败截图')
# return False
# 加载失败时截图
def load_fail(self, msg):
# 截图保存
now = time.strftime("%Y-%m-%d %H-%M-%S")
image_name = setting.TEST_ERROR_Image + '/' + msg + " " + now + ".png"
self.driver.save_screenshot(image_name)
def set_wifi(self, password=None):
# 设置默认WIFI密码
if password == None:
password = '******'
self.chooesWifi()
self.setWifiPassword(password)
# WIFI设置完成点击完成
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
#设置要连接的WIFI
def chooesWifi(self):
ele = self.wifiSet_p.get_wifi_arrow_element()
sleep(1)
ele.click()
# 连接WIFI
ele3 = WebDriverWait(
self.driver, 10,
0.5).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"41\")"))
if ele3:
ele3.click()
#如果没发现，向下滑动以下
else:
self.swip.swipe_up(300)
# 连接WIFI
ele2 = WebDriverWait(
self.driver, 10,
0.5).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"41\")"))
if ele2:
ele2.click()
else:
self.loger.info('WIFI选择失败，未找到指定WIFI。')
sleep(2)
self.loger.info('WIFI选择成功。')
#设置WIFI密码
def setWifiPassword(self, password):
#密码元素
ele = self.wifiSet_p.get_password_element()
sleep(1)
ele.click()
#调用自己封装的函数删除文本内容
self.clean_text(ele.get_attribute('text'))
sleep(1)
#输入WIFI密码
ele.send_keys(password)
self.loger.info('WIFI密码设置成功。')
#清空文本
def clean_text(self, text):
self.driver.keyevent(123) # 123代表光标移动到末尾键
for i in range(0, len(text)):
self.driver.keyevent(67) # 67退格键
def skip_wifiSet(self):
sleep(4)
ele = self.wifiSet_p.get_skip_element()
sleep(1)
ele.click()
class H5183MainHandle():
dataList = ''
def __init__(self,driver,device, com, bps, timeout,com2,bps2,bytesize,stopbits,Ret1,Ret2):
self.device = device
self.driver = driver
self.Ret1 = Ret1
self.Ret2 = Ret2
#日志
self.loger = logging.getLogger('H5183MainCase.sub.module') #多模块使用logging
# 获取屏幕分辨率
self.screen_x = self.driver.get_window_size()['width'] # 屏幕宽度--单位是px
self.screen_y = self.driver.get_window_size()['height'] # 屏幕的高度-单位是px
self.swip = Swip(self.screen_x, self.screen_y, self.driver)
#选择设备
self.ch_device = ChooesDevice(self.device,self.driver)
#打印串口
self.port = com
self.bps = bps
self.timeout = timeout
self.start = True
self.stopbits = stopbits
self.bytesize = bytesize
#截图路径
self.image_path = setting.TEST_ERROR_Image
# global Ret1
try:
# 打开串口，并得到串口对象
self.main_engine = serial.Serial(self.port, self.bps, timeout=self.timeout,bytesize=self.bytesize,stopbits=self.stopbits)
self.main_engine.flushInput() # 清空缓冲区
# 判断是否打开成功
if (self.main_engine.is_open):
self.Ret1 = True
except Exception as e:
print("---异常---：", e)
#控制串口
self.port2 = com2
self.bps2 = bps2
self.bytesize = bytesize
self.stopbits = stopbits
# global Ret2
try:
# 打开串口，并得到串口对象
self.main_engine2= serial.Serial(self.port2,self.bps2,timeout=self.timeout,bytesize=self.bytesize,stopbits=self.stopbits)
# 判断是否打开成功
if (self.main_engine2.is_open):
self.Ret2 = True
#初始化继电器类
self.relay_h = RelayHandle(self.main_engine2)
except Exception as e:
print("---异常---：", e)
def ota(self,times):
if(self.Ret1 and self.Ret2):
#功能线程运行
threading.Thread(target=self.ota_handle,args=(times,)).start()
#日志线程运行
threading.Thread(target=self.recv,).start()
else:
print("创建串口失败")
# 接收串口数据
def recv(self):
if self.start:
print("开始接收数据：")
else:
print("测试完毕，停止接收数据：")
while self.start:
try:
count = self.main_engine.inWaiting() # 获取串口缓冲区数据
if count != 0:
data = self.main_engine.read(self.main_engine.in_waiting).decode("gbk") # 读出串口数据，数据采用gbk编码
# print(time.strftime("%Y-%m-%d %H-%M-%S"), " --- recv --> ") # 打印一下子
time.sleep(0.1) # 延时0.1秒，免得CPU出问题
self.dataList += data
data = data.replace("\r", "")
self.loger.info(data)
except Exception as e:
print("异常报错：", e)
# 截图
def screenshot(self, msg):
# 截图保存
now = time.strftime("%Y-%m-%d %H-%M-%S")
image_name = setting.TEST_ERROR_Image + '/' + msg + " " + now + ".png"
self.driver.save_screenshot(image_name)
def openDevice(self):
if (self.Ret1 and self.Ret2):
# 长按设备开机键，开启设备
self.relay_h.long_click()
# 日志线程运行
threading.Thread(target=self.recv, ).start()
else:
print("创建串口失败")
#ota升级
def ota_handle(self,times):
n = 0
m = 0
k = 0
p = 0
self.app_check = False
self.com_log_check = False
try:
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)).is_displayed()
except:
self.loger.info('没有找到该设备，无法进入设备详情页')
print('没有找到该设备，无法进入设备详情页')
else:
sleep(2)
self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device).click()
sleep(2)
# 进入设置页
btn_settting = self.driver.find_element_by_id("btn_setting")
sleep(1)
btn_settting.click()
sleep(3)
print('开始向上滑动')
# 向上滑动
try:
sleep(3)
self.swip.swipe_up(600)
sleep(3)
self.swip.swipe_up(600)
sleep(3)
self.swip.swipe_up(400)
sleep(3)
self.swip.swipe_up(400)
sleep(2)
except Exception as e:
print(e)
for i in range(times):
try:
while True:
self.driver.find_element_by_android_uiautomator("new UiSelector().text(\"固件版本\")").click()
try:
WebDriverWait(self.driver, 3, 0.5).until(
EC.element_to_be_clickable((By.ID, 'btn_update'))).is_displayed()
except:
self.loger.info('没有检测到升级，等待')
print('没有检测到升级，等待')
p += 1
if p >10:
p = 0
print('等了10次还没有检测到升级，返回app首页重新进入')
self.driver.find_element_by_id('btn_back').click()
sleep(2)
self.driver.find_element_by_id('btn_back').click()
WebDriverWait(self.driver, 60, 0.5).until(
lambda x: x.find_element_by_android_uiautomator('new UiSelector().text(\"%s\")' % self.device)).click()
sleep(2)
self.driver.find_element_by_id("btn_setting").click()
# 向上滑动
try:
sleep(3)
self.swip.swipe_up(600)
sleep(3)
self.swip.swipe_up(600)
sleep(3)
self.swip.swipe_up(400)
sleep(3)
self.swip.swipe_up(400)
sleep(2)
except Exception as e:
print(e)
else:
m += 1
sleep(2)
# 点击升级按钮
self.driver.find_element_by_id('btn_update').click()
self.loger.info('开始升级')
print('开始升级')
p = 0
break
try:
# until_not是当某元素消失或什么条件不成立则继续执行
WebDriverWait(self.driver, 3, 0.1).until(
EC.presence_of_element_located((By.XPATH, '//*[contains(@text,"设备升级")]')))
except:
self.loger.info('点击升级按钮3秒内没有出现升级弹窗')
print('点击升级按钮3秒内没有出现升级弹窗')
else:
self.loger.info('出现升级弹窗')
print('出现升级弹窗')
try:
#until_not是当某元素消失或什么条件不成立则继续执行
WebDriverWait(self.driver, 8, 0.5).until_not(
EC.presence_of_element_located((By.XPATH, '//*[contains(@text,"设备升级")]')))
except:
try:
WebDriverWait(self.driver, 120, 0.5).until_not(
EC.presence_of_element_located((By.XPATH, '//*[contains(@text,"设备升级")]')))
except:
print('2分钟设备都没有升级完')
self.screenshot('2分钟设备都没有升级完')
else:
# 校验串口日志
# check_result = self.com_bluetooth_log_check(self.dataList, 'success')
# if check_result:
# print('串口端检测到ota升级成功')
# self.loger.info('串口端检测到ota升级成功')
# self.com_log_check = True
# else:
# print('串口端检测到ota升级失败')
# self.loger.info('串口端检测到ota升级失败')
# self.com_log_check = False
#校验app ui
try:
# WebDriverWait(self.driver, 3, 0.1).until(
# EC.presence_of_element_located((By.XPATH, '//*[contains(@text,"升级成功")]')))
WebDriverWait(self.driver, 3, 0.1).until(
lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"升级成功，请手动重启设备\")')).is_displayed()
except:
print('app端检测到ota升级失败')
self.loger.info('app端检测到ota升级失败')
self.app_check = False
else:
print('app端检测到ota升级成功')
self.loger.info('app端检测到ota升级成功')
self.app_check = True
if self.app_check :
n += 1
self.screenshot('第[%s]次OTA成功' %n)
self.loger.info('第[%s]次OTA成功' %n)
print('第[%s]次OTA成功' %n)
sleep(2)
# 点击完成
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"知道了\")").click()
#重启设备
self.relay_h.long_click()
else:
k += 1
self.screenshot('第[%s]次OTA失败' %k)
self.loger.info('第[%s]次OTA失败' %k)
print('第[%s]次OTA失败' %k)
sleep(3)
self.driver.find_element_by_id('btn_back').click()
# 重启设备
sleep(2)
self.relay_h.long_click()
else:
k += 1
print('开始升级失败')
self.loger.info('开始升级失败')
self.screenshot('开始升级失败')
sleep(3)
self.driver.find_element_by_id('btn_back').click()
# 重启设备
sleep(2)
self.relay_h.long_click()
except Exception as e:
print(e)
continue
self.loger.info('ota升级[%s]次' % m + '，成功了[%s]次！' % n+'，失败了[%s]次！'%k+'，成功率:'+str(n/m*100)+'%.')
print('ota升级[%s]次' % m + '，成功了[%s]次！' % n + '，失败了[%s]次！' % k + '，成功率:' + str(n / m * 100) + '%.')
# 监测串口日志
def com_bluetooth_log_check(self, dataList, sl):
start = len(dataList) - 1500
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r", "").replace("\n", "") # 去掉空格、回车符、换行符
strlist = str2.split(':', 40) # 以冒号进行分割
# 打印串口日志
self.loger.info('蓝牙ota日志：' + str(strlist))
print('蓝牙ota日志：' + str(strlist))
if str(strlist).find(sl) >= 0:
return True
else:
return False
class H7130MainHandle():
dataList = ''
def __init__(self, driver, device, com, bps, timeout, com2, bps2, bytesize,
stopbits, Ret1, Ret2):
self.device = device
#日志
self.user_log = UserLog(self.device)
self.loger = self.user_log.get_logger()
self.driver = driver
self.Ret1 = Ret1
self.Ret2 = Ret2
# 获取屏幕分辨率
self.screen_x = self.driver.get_window_size()['width'] # 屏幕宽度--单位是px
self.screen_y = self.driver.get_window_size()['height'] # 屏幕的高度-单位是px
self.swip = Swip(self.screen_x, self.screen_y, self.driver)
#打印串口
self.port = com
self.bps = bps
self.timeout = timeout
self.start = True
# global Ret1
try:
# 打开串口，并得到串口对象
self.main_engine = serial.Serial(self.port,
self.bps,
timeout=self.timeout)
self.main_engine.flushInput() # 清空缓冲区
# 判断是否打开成功
if (self.main_engine.is_open):
self.Ret1 = True
except Exception as e:
print("---异常---：", e)
#控制串口
self.port2 = com2
self.bps2 = bps2
self.bytesize = bytesize
self.stopbits = stopbits
# global Ret2
try:
# 打开串口，并得到串口对象
self.main_engine2 = serial.Serial(self.port2,
self.bps2,
timeout=self.timeout,
bytesize=self.bytesize,
stopbits=self.stopbits)
# 判断是否打开成功
if (self.main_engine2.is_open):
self.Ret2 = True
except Exception as e:
print("---异常---：", e)
def connect_H7130(self, times):
if (self.Ret1 and self.Ret2):
#功能线程运行
threading.Thread(target=self.add_device, args=(times, )).start()
# threading.Thread(target=self.leve_switch, args=(times,)).start()
# threading.Thread(target=self.on_off_switch, args=(times,)).start()
#日志线程运行
threading.Thread(target=self.recv, ).start()
else:
print("创建串口失败")
# 选择要添加的设备类型
def chooes_device(self):
sleep(4)
# 点击+号
# ele = self.driver.find_element_by_xpath('//android.widget.ImageView[2]')
ele = self.driver.find_element_by_id('iv_add')
sleep(2)
ele.click()
sleep(3)
self.loger.info('开始添加设备')
# 点击搜索
WebDriverWait(self.driver, 30,
1).until(EC.element_to_be_clickable(
(By.ID, 'tv_search'))).click()
sleep(2)
# 切换输入法，方便后续调用输入法的搜索按钮
self.driver.activate_ime_engine(
'com.sec.android.inputmethod/.SamsungKeypad')
# 搜索框输入device_type
self.driver.press_keycode(14)
sleep(0.5)
self.driver.press_keycode(8)
sleep(0.5)
self.driver.press_keycode(10)
sleep(0.5)
self.driver.press_keycode(7)
WebDriverWait(self.driver, 30,
1).until(EC.element_to_be_clickable(
(By.ID, 'sku_icon'))).click()
#设备配网
def add_device(self, times):
n = 0 #成功次数
m = 0 #配网执行次数
k = 0 #WiFi列表加载失败次数
app_check = False
com_check = False
for i in range(times):
#选择设备类型
try:
self.chooes_device()
m += 1
#连接蓝牙
while True:
try:
WebDriverWait(self.driver, 120, 1).until(
lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)
).is_displayed()
except:
self.loger.info('蓝牙扫描失败，重新扫描')
self.screenshot('蓝牙扫描失败')
try:
WebDriverWait(
self.driver, 60,
1).until(lambda x: x.
find_element_by_android_uiautomator(
"new UiSelector().text(\"重新扫描\")")
).is_displayed()
except:
self.loger.info('重新扫描按钮不可点击')
else:
self.loger.info('点击重新扫描按钮')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新扫描\")").click()
else:
self.loger.info('蓝牙扫描成功')
sleep(3)
ele = self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)
sleep(1)
ele.click()
break
# 进入配对界面，点击设备开关按键
try:
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"配对\")")).is_displayed()
except:
self.loger.info('进入蓝牙配对界面失败')
else:
sleep(2)
self.once_click()
# 蓝牙连接成功，点击完成
try:
WebDriverWait(self.driver, 120, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")")).is_displayed(
)
except:
self.loger.info('蓝牙配对失败')
self.screenshot('蓝牙配对失败')
# 校验串口日志
self.com_bluetooth_log_check(self.dataList)
else:
# 校验串口日志
check_result = self.com_bluetooth_log_check(
self.dataList)
if check_result:
self.loger.info('串口蓝牙日志校验成功')
# 点击完成
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
# 进入WiFi配置界面
try:
# WebDriverWait(self.driver, 120, 1).until(
# lambda x: x.find_element_by_android_uiautomator(
# "new UiSelector().text(\"完成\")")).is_displayed()
WebDriverWait(self.driver, 120, 1).until(
lambda x: x.
find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")"
)).is_clickable()
except:
self.loger.info('wifi设置页面加载失败')
self.screenshot('wifi设置页面加载失败')
k += 1
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"跳过\")").click()
sleep(2)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"确认\")").click()
#删除设备
self.delete_lempDevice()
else:
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
# 校验串口日志，等4秒
sleep(4)
check_result_2 = self.com_wifi_log_check(
self.dataList)
# 判断设备是否配网成功
# try:
# WebDriverWait(self.driver, 120, 1).until(
# EC.element_to_be_clickable((By.ID, 'iv_switch')))
try:
WebDriverWait(self.driver, 180, 0.1).until(
EC.presence_of_element_located(
(By.XPATH,
'//*[contains(@text,"连接成功")]')))
except:
self.loger.info('APP端Toast提示失败')
self.loger.info('设备配网失败')
continue
else:
self.loger.info('APP端Toast提示成功')
add_result = True
if check_result_2:
self.loger.info('串口WiFi日志校验成功')
com_check = True
else:
self.loger.info('串口WiFi日志校验失败')
com_check = False
if add_result or com_check:
n += 1
self.loger.info('设备配网成功')
else:
self.loger.info('设备配网失败')
# 删除设备
self.delete_lempDevice()
else:
self.loger.info('串口蓝牙日志校验失败')
except Exception as e:
print(e)
continue
self.start = False
self.loger.info('[%s]' % self.device + '设备配网[%s]次，' % m +
'成功了[%s]次，' % n + '，配网成功率%s' % (n / m * 100) + '%')
self.loger.info('wifi设置页面加载失败次数：%s' % k)
#删除设备
def delete_lempDevice(self):
sleep(4)
btn_settting = self.driver.find_element_by_id("btn_setting")
sleep(1)
btn_settting.click()
sleep(2)
#向下滑动
self.swip.swipe_up(600)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"删除设备\")").click()
sleep(1)
yes = self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"是\")")
yes.click()
sleep(1)
#刷新首页
self.swip.swipe_down(600)
try:
WebDriverWait(
self.driver, 5, 1
).until(lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)).is_displayed()
except:
self.loger.info('删除设备成功')
self.loger.info(
'分割线--------------------------------------------------分割线')
else:
self.loger.info('删除设备失败')
#发数据
def Send_data(self, data):
self.main_engine2.write(data)
#长按4秒
def long_click(self):
#发送开
self.Send_data(bytes.fromhex('A0 01 01 A2'))
sleep(4)
#发送关
self.Send_data(bytes.fromhex('A0 01 00 A1'))
#短按
def once_click(self):
#发送开
self.Send_data(bytes.fromhex('A0 01 01 A2'))
sleep(0.5)
#发送关
self.Send_data(bytes.fromhex('A0 01 00 A1'))
# 监测串口日志
def com_bluetooth_log_check(self, dataList):
start = len(dataList) - 1000
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 20) # 以冒号进行分割
# 打印串口日志
self.loger.info('蓝牙配对日志：' + str(strlist))
print('蓝牙配对日志：' + str(strlist))
sl = 'ble_msg_get_wifi_mac_addressmacstr'
if str(strlist).find(sl) >= 0:
print('本次蓝牙配对成功')
return True
else:
print('本次蓝牙配对失败')
return False
# 档位切换日志检测
def com_log_check(self, dataList, sl, option_type):
if option_type == 'on_off_switch':
start = len(dataList) - 3400
elif option_type == 'leve_switch':
start = len(dataList) - 1400
else:
start = len(dataList) - 2200
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 50) # 以冒号进行分割
# 打印串口日志
self.loger.info('本次操作后日志：' + str(strlist))
for i in range(len(strlist)):
if strlist[i].find(sl) >= 0:
print('串口日志：' + strlist[i])
self.loger.info('串口日志：' + strlist[i])
return strlist[i]
# 监测串口日志
def com_wifi_log_check(self, dataList):
start = len(dataList) - 8000
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 80) # 以冒号进行分割
# 打印串口日志
self.loger.info('wifi联网日志：' + str(strlist))
print('wifi联网日志：' + str(strlist))
sl = 'IOT_BLE_WIFI_CONNECT_SUC'
if str(strlist).find(sl) >= 0:
print('本次WiFi连接成功')
return True
else:
print('本次WiFi连接失败')
return False
# 接收串口数据
def recv(self):
if self.start:
print("开始接收数据：")
else:
print("测试完毕，停止接收数据：")
while self.start:
try:
count = self.main_engine.inWaiting() # 获取串口缓冲区数据
if count != 0:
data = self.main_engine.read(
self.main_engine.in_waiting).decode(
"gbk") # 读出串口数据，数据采用gbk编码
# print(time.strftime("%Y-%m-%d %H-%M-%S"), " --- recv --> ") # 打印一下子
time.sleep(0.1) # 延时0.1秒，免得CPU出问题
self.dataList += data
except Exception as e:
print("异常报错：", e)
# 截图
def screenshot(self, msg):
# 截图保存
now = time.strftime("%Y-%m-%d %H-%M-%S")
image_name = LOG_DIR + '/' + msg + " " + now + ".png"
self.driver.save_screenshot(image_name)
# 进入设备详情页
def enter_device(self):
try:
WebDriverWait(
self.driver, 120, 1
).until(lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)).is_displayed()
except:
self.loger.info('没有找到该设备，无法进入设备详情页')
else:
self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device).click()
# 档位切换
def leve_switch(self, times):
# 高档按钮：high_gear_container
# 中档按钮：mid_gear_container
# 低档按钮：low_gear_container
# 进入设备详情页
self.enter_device()
try:
WebDriverWait(self.driver, 120, 1).until(
EC.element_to_be_clickable((By.ID, 'iv_switch')))
except:
self.loger.info('设备详情页加载失败')
else:
self.loger.info('设备详情页加载成功')
sleep(5)
for i in range(times):
try:
try:
WebDriverWait(self.driver, 30, 1).until(
EC.element_to_be_clickable(
(By.ID, 'high_gear_container')))
except:
print('高档位按钮不可点击')
continue
else:
self.driver.find_element_by_id(
'high_gear_container').click()
# 串口校验
sleep(1)
result = self.com_log_check(self.dataList,
'AA1002000103',
'leve_switch')
if len(result) > 0:
self.loger.info('高档位切换成功')
print('高档位切换成功')
else:
self.loger.info('高档位切换失败')
print('高档位切换失败')
sleep(3)
try:
WebDriverWait(self.driver, 30, 1).until(
EC.element_to_be_clickable(
(By.ID, 'mid_gear_container')))
except:
print('中档位按钮不可点击')
continue
else:
self.driver.find_element_by_id(
'mid_gear_container').click()
sleep(1)
result = self.com_log_check(self.dataList,
'AA1002000102',
'leve_switch')
if len(result) > 0:
self.loger.info('中档位切换成功')
print('中档位切换成功')
else:
self.loger.info('中档位切换失败')
print('中档位切换失败')
sleep(3)
try:
WebDriverWait(self.driver, 30, 1).until(
EC.element_to_be_clickable(
(By.ID, 'low_gear_container')))
except:
print('低档位按钮不可点击')
continue
else:
self.driver.find_element_by_id(
'low_gear_container').click()
sleep(1)
result = self.com_log_check(self.dataList,
'AA1002000101',
'leve_switch')
if len(result) > 0:
self.loger.info('低档位切换成功')
print('低档位切换成功')
else:
self.loger.info('低档位切换失败')
print('低档位切换失败')
sleep(3)
# 摇头
self.rotate((i + 1) & 1)
sleep(2)
# 童锁
self.child_lock((i + 1) & 1)
sleep(2)
# 关闭设备
try:
self.on_off_switch()
sleep(3)
# 开启设备
self.on_off_switch()
sleep(3)
except Exception as e:
print(e)
continue
print('第%s次循环操作结束' % (i + 1))
self.loger.info('第%s次循环操作结束' % (i + 1))
except Exception as e:
print(e)
continue
# 测试完毕，停止串口打印
self.start = False
# 开关切换
def on_off_switch(self, times=None):
# # 进入设备详情页
# self.enter_device()
# try:
# WebDriverWait(self.driver, 120, 1).until(
# EC.element_to_be_clickable((By.ID, 'iv_switch')))
# except:
# self.loger.info('设备详情页加载失败')
# else:
# self.loger.info('设备详情页加载成功')
# for i in range(times):
# 开关按钮：iv_switch
try:
WebDriverWait(
self.driver, 5,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"高档\")")).is_displayed()
except:
print('设备当前状态是关，打开设备')
self.loger.info('设备当前状态是关，打开设备')
try:
self.driver.find_element_by_id('iv_switch').click()
sleep(3)
result = self.com_log_check(self.dataList, 'AA1001000101',
'on_off_switch')
if len(result) > 0:
self.loger.info('设备开成功')
print('设备开成功')
sleep(3)
else:
self.loger.info('设备开失败')
print('设备开失败')
except Exception as e:
print(e)
# continue
else:
self.loger.info('设备当前状态是开，关闭设备')
print('设备当前状态是开，关闭设备')
try:
self.driver.find_element_by_id('iv_switch').click()
sleep(3)
result = self.com_log_check(self.dataList, 'AA1001000100',
'on_off_switch')
if len(result) > 0:
self.loger.info('设备关成功')
print('设备关成功')
sleep(3)
else:
self.loger.info('设备关失败')
print('设备关失败')
except Exception as e:
print(e)
# continue
# 摇头
def rotate(self, m):
# 摇头：iv_rotate
if m == 0:
try:
self.driver.find_element_by_id('iv_rotate').click()
sleep(3)
result = self.com_log_check(self.dataList, 'AA1003000100',
'rotate')
if len(result) > 0:
self.loger.info('设备关闭摇头成功')
print('设备关闭摇头成功')
sleep(3)
else:
self.loger.info('设备关闭摇头失败')
print('设备关闭摇头失败')
except Exception as e:
print(e)
else:
try:
self.driver.find_element_by_id('iv_rotate').click()
sleep(3)
result = self.com_log_check(self.dataList, 'AA1003000101',
'rotate')
if len(result) > 0:
self.loger.info('设备打开摇头成功')
print('设备打开摇头成功')
sleep(3)
else:
self.loger.info('设备打开摇头失败')
print('设备打开摇头失败')
except Exception as e:
print(e)
# 童锁
def child_lock(self, m):
# 童锁按钮：iv_child_lock
if m == 0:
try:
self.driver.find_element_by_id('iv_child_lock').click()
sleep(3)
result = self.com_log_check(self.dataList, 'AA1005000100',
'child_lock')
if len(result) > 0:
self.loger.info('设备关闭童锁成功')
print('设备关闭童锁成功')
sleep(3)
else:
self.loger.info('设备关闭童锁失败')
print('设备关闭童锁失败')
except Exception as e:
print(e)
else:
try:
self.driver.find_element_by_id('iv_child_lock').click()
sleep(3)
result = self.com_log_check(self.dataList, 'AA1005000101',
'child_lock')
if len(result) > 0:
self.loger.info('设备打开童锁成功')
print('设备打开童锁成功')
sleep(3)
else:
self.loger.info('设备打开童锁失败')
print('设备打开童锁失败')
except Exception as e:
print(e)
#
#
# if __name__ == '__main__':
# platformVersion = '10' #安卓系统版本
# mobileName = 'R58M36MWZ1B' #手机名称
# device = 'H7130_C583' #设备名称
# times = 100 #测试次数
# Ret1 = False #日志打印串口是否创建成功标志
# Ret2 = False #控制串口是否创建成功标志
# com1 = 'com13'
# bps = 115200
# timeout = 0.5
# com2 = "com12"
# bps2 = 9600
# timex = 0.5
# bytesize = 8
# stopbits = 1
# ms = Humidifier2(platformVersion,mobileName,device,com1, bps, timeout,com2,bps2,bytesize,stopbits)
# if(Ret1 and Ret2):
# #功能线程运行
# # threading.Thread(target=ms.add_device,args=(times,)).start()
# # threading.Thread(target=ms.leve_switch, args=(times,)).start()
# threading.Thread(target=ms.on_off_switch, args=(times,)).start()
# #日志线程运行
# threading.Thread(target=ms.recv,).start()
# # ms.add_device(times)
# else:
# print("创建串口失败")
class H6075MainHandle():
dataList = ''
def __init__(self,
driver,
device,
com,
bps,
timeout,
Ret1,
Ret2=None,
com2=None,
bps2=None,
bytesize=None,
stopbits=None):
self.device = device
#日志
self.user_log = UserLog(self.device)
self.loger = self.user_log.get_logger()
self.driver = driver
self.Ret1 = Ret1
self.Ret2 = Ret2
# 获取屏幕分辨率
self.screen_x = self.driver.get_window_size()['width'] # 屏幕宽度--单位是px
self.screen_y = self.driver.get_window_size()['height'] # 屏幕的高度-单位是px
self.swip = Swip(self.screen_x, self.screen_y, self.driver)
#串口日志关键字
self.com_keyword = [
'PT_PROTOCOL_MODE_SENCE_READ', 'PT_PROTOCOL_MODE_SENCE_RELAX',
'PT_PROTOCOL_MODE_SENCE_NIGHT',
'PT_PROTOCOL_MODE_SENCE_CANDLELIGHT',
'PT_PROTOCOL_MODE_SENCE_SHIMMER', 'PT_PROTOCOL_MODE_SENCE_BREATH',
'PT_PROTOCOL_MODE_SENCE_GLINT', 'PT_PROTOCOL_MODE_SENCE_BLINK'
]
#模式
self.mode = ['阅读', '休闲', '夜灯', '烛光', '微光', '呼吸', '闪烁', '眨眼']
#打印串口
self.port = com
self.bps = bps
self.timeout = timeout
self.start = True
# global Ret1
try:
# 打开串口，并得到串口对象
self.main_engine = serial.Serial(self.port,
self.bps,
timeout=self.timeout)
self.main_engine.flushInput() # 清空缓冲区
# 判断是否打开成功
if (self.main_engine.is_open):
self.Ret1 = True
except Exception as e:
print("---异常---：", e)
# #控制串口
# self.port2 = com2
# self.bps2 = bps2
# self.bytesize = bytesize
# self.stopbits = stopbits
# # global Ret2
# try:
# # 打开串口，并得到串口对象
# self.main_engine2= serial.Serial(self.port2,self.bps2,timeout=self.timeout,bytesize=self.bytesize,stopbits=self.stopbits)
# # 判断是否打开成功
# if (self.main_engine2.is_open):
# self.Ret2 = True
# except Exception as e:
# print("---异常---：", e)
def connect_H6075(self, times):
if (self.Ret1 and self.Ret2):
#功能线程运行
threading.Thread(target=self.add_device, args=(times, )).start()
# threading.Thread(target=self.leve_switch, args=(times,)).start()
# threading.Thread(target=self.on_off_switch, args=(times,)).start()
#日志线程运行
threading.Thread(target=self.recv, ).start()
else:
print("创建串口失败")
# 选择要添加的设备类型
def chooes_device(self):
sleep(4)
# 点击+号
# ele = self.driver.find_element_by_xpath('//android.widget.ImageView[2]')
ele = self.driver.find_element_by_id('iv_add')
sleep(2)
ele.click()
sleep(3)
self.loger.info('开始添加设备')
# 点击搜索
WebDriverWait(self.driver, 30,
1).until(EC.element_to_be_clickable(
(By.ID, 'tv_search'))).click()
sleep(2)
# 切换输入法，方便后续调用输入法的搜索按钮
self.driver.activate_ime_engine(
'com.sec.android.inputmethod/.SamsungKeypad')
# 搜索框输入device_type
self.driver.press_keycode(14)
sleep(0.5)
self.driver.press_keycode(8)
sleep(0.5)
self.driver.press_keycode(10)
sleep(0.5)
self.driver.press_keycode(7)
WebDriverWait(self.driver, 30,
1).until(EC.element_to_be_clickable(
(By.ID, 'sku_icon'))).click()
#设备配网
def add_device(self, times):
n = 0 #成功次数
m = 0 #配网执行次数
k = 0 #WiFi列表加载失败次数
app_check = False
com_check = False
for i in range(times):
#选择设备类型
try:
self.chooes_device()
m += 1
#连接蓝牙
while True:
try:
WebDriverWait(self.driver, 120, 1).until(
lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)
).is_displayed()
except:
self.loger.info('蓝牙扫描失败，重新扫描')
self.screenshot('蓝牙扫描失败')
try:
WebDriverWait(
self.driver, 60,
1).until(lambda x: x.
find_element_by_android_uiautomator(
"new UiSelector().text(\"重新扫描\")")
).is_displayed()
except:
self.loger.info('重新扫描按钮不可点击')
else:
self.loger.info('点击重新扫描按钮')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新扫描\")").click()
else:
self.loger.info('蓝牙扫描成功')
sleep(3)
ele = self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)
sleep(1)
ele.click()
break
# 进入配对界面，点击设备开关按键
try:
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"配对\")")).is_displayed()
except:
self.loger.info('进入蓝牙配对界面失败')
else:
sleep(2)
self.once_click()
# 蓝牙连接成功，点击完成
try:
WebDriverWait(self.driver, 120, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")")).is_displayed(
)
except:
self.loger.info('蓝牙配对失败')
self.screenshot('蓝牙配对失败')
# 校验串口日志
self.com_bluetooth_log_check(self.dataList)
else:
# 校验串口日志
check_result = self.com_bluetooth_log_check(
self.dataList)
if check_result:
self.loger.info('串口蓝牙日志校验成功')
# 点击完成
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
# 进入WiFi配置界面
try:
# WebDriverWait(self.driver, 120, 1).until(
# lambda x: x.find_element_by_android_uiautomator(
# "new UiSelector().text(\"完成\")")).is_displayed()
WebDriverWait(self.driver, 120, 1).until(
lambda x: x.
find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")"
)).is_clickable()
except:
self.loger.info('wifi设置页面加载失败')
self.screenshot('wifi设置页面加载失败')
k += 1
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"跳过\")").click()
sleep(2)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"确认\")").click()
#删除设备
self.delete_lempDevice()
else:
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
# 校验串口日志，等4秒
sleep(4)
check_result_2 = self.com_wifi_log_check(
self.dataList)
# 判断设备是否配网成功
# try:
# WebDriverWait(self.driver, 120, 1).until(
# EC.element_to_be_clickable((By.ID, 'iv_switch')))
try:
WebDriverWait(self.driver, 180, 0.1).until(
EC.presence_of_element_located(
(By.XPATH,
'//*[contains(@text,"连接成功")]')))
except:
self.loger.info('APP端Toast提示失败')
self.loger.info('设备配网失败')
continue
else:
self.loger.info('APP端Toast提示成功')
add_result = True
if check_result_2:
self.loger.info('串口WiFi日志校验成功')
com_check = True
else:
self.loger.info('串口WiFi日志校验失败')
com_check = False
if add_result or com_check:
n += 1
self.loger.info('设备配网成功')
else:
self.loger.info('设备配网失败')
# 删除设备
self.delete_lempDevice()
else:
self.loger.info('串口蓝牙日志校验失败')
except Exception as e:
print(e)
continue
self.start = False
self.loger.info('[%s]' % self.device + '设备配网[%s]次，' % m +
'成功了[%s]次，' % n + '，配网成功率%s' % (n / m * 100) + '%')
self.loger.info('wifi设置页面加载失败次数：%s' % k)
#删除设备
def delete_lempDevice(self):
sleep(4)
btn_settting = self.driver.find_element_by_id("btn_setting")
sleep(1)
btn_settting.click()
sleep(2)
#向下滑动
self.swip.swipe_up(600)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"删除设备\")").click()
sleep(1)
yes = self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"是\")")
yes.click()
sleep(1)
#刷新首页
self.swip.swipe_down(600)
try:
WebDriverWait(
self.driver, 5, 1
).until(lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)).is_displayed()
except:
self.loger.info('删除设备成功')
self.loger.info(
'分割线--------------------------------------------------分割线')
else:
self.loger.info('删除设备失败')
# #发数据
# def Send_data(self,data):
# self.main_engine2.write(data)
# #长按4秒
# def long_click(self):
# #发送开
# self.Send_data(bytes.fromhex('A0 01 01 A2'))
# sleep(4)
# #发送关
# self.Send_data(bytes.fromhex('A0 01 00 A1'))
#
# #短按
# def once_click(self):
# #发送开
# self.Send_data(bytes.fromhex('A0 01 01 A2'))
# sleep(0.5)
# #发送关
# self.Send_data(bytes.fromhex('A0 01 00 A1'))
# 监测串口日志
def com_bluetooth_log_check(self, dataList, sl):
start = len(dataList) - 1000
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 20) # 以冒号进行分割
# 打印串口日志
self.loger.info('蓝牙配对日志：' + str(strlist))
print('蓝牙配对日志：' + str(strlist))
if str(strlist).find(sl) >= 0:
print('本次蓝牙配对成功')
return True
else:
print('本次蓝牙配对失败')
return False
# 档位切换日志检测
def com_log_check(self, dataList, sl, option_type=None):
if option_type != None:
if option_type == 'on_off_switch':
start = len(dataList) - 3400
elif option_type == 'leve_switch':
start = len(dataList) - 1400
else:
start = len(dataList) - 2200
else:
start = len(dataList) - 3000
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 50) # 以冒号进行分割
# 打印串口日志
self.loger.info('本次操作后日志：' + str(strlist))
for i in range(len(strlist)):
if strlist[i].find(sl) >= 0:
print('串口日志：' + strlist[i])
self.loger.info('串口日志：' + strlist[i])
return True
# 监测串口日志
def com_wifi_log_check(self, dataList):
start = len(dataList) - 8000
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 80) # 以冒号进行分割
# 打印串口日志
self.loger.info('wifi联网日志：' + str(strlist))
print('wifi联网日志：' + str(strlist))
sl = 'IOT_BLE_WIFI_CONNECT_SUC'
if str(strlist).find(sl) >= 0:
print('本次WiFi连接成功')
return True
else:
print('本次WiFi连接失败')
return False
# 接收串口数据
def recv(self):
if self.start:
print("开始接收数据：")
else:
print("测试完毕，停止接收数据：")
while self.start:
try:
count = self.main_engine.inWaiting() # 获取串口缓冲区数据
if count != 0:
data = self.main_engine.read(
self.main_engine.in_waiting).decode(
"gbk") # 读出串口数据，数据采用gbk编码
# print(time.strftime("%Y-%m-%d %H-%M-%S"), " --- recv --> ") # 打印一下子
time.sleep(0.1) # 延时0.1秒，免得CPU出问题
self.dataList += data
except Exception as e:
print("异常报错：", e)
# 截图
def screenshot(self, msg):
# 截图保存
now = time.strftime("%Y-%m-%d %H-%M-%S")
image_name = LOG_DIR + '/' + msg + " " + now + ".png"
self.driver.save_screenshot(image_name)
#模式切换
def mode_switch(self, times):
if (self.Ret1):
#功能线程运行
threading.Thread(target=self.mode_switch_handle,
args=(times, )).start()
#日志线程运行
threading.Thread(target=self.recv, ).start()
else:
print("创建串口失败")
# 进入设备详情页
def enter_device(self):
try:
WebDriverWait(
self.driver, 120, 1
).until(lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)).is_displayed()
except:
self.loger.info('没有找到该设备，无法进入设备详情页')
else:
self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device).click()
# 模式切换
def mode_switch_handle(self, times):
#进入设备详情页
self.enter_device()
n = 0
try:
WebDriverWait(
self.driver, 120,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"亮度\")")).is_displayed()
except:
print('设备详情页加载失败')
else:
for i in range(times):
for i in range(8):
# 开始模式循环操作
self.driver.find_element_by_xpath(
'//*[@resource-id="com.govee.home:id/scenes_list"]/android.widget.RelativeLayout[%s]'
% (i + 1) + '/android.widget.ImageView[1]').click()
if self.com_keyword[i] == 'PT_PROTOCOL_MODE_SENCE_READ':
sleep(3)
else:
sleep(1)
# 监测串口日志
check_result = self.com_log_check(self.dataList,
self.com_keyword[i])
if check_result == True:
n += 1
print(self.mode[i] + '切换成功')
self.loger.info(self.mode[i] + '切换成功')
try:
WebDriverWait(self.driver, 60, 0.2).until(
EC.element_to_be_clickable((
By.XPATH,
'//*[@resource-id="com.govee.home:id/scenes_list"]/android.widget.RelativeLayout[%s]'
% (i + 1) +
'/android.widget.ImageView[1]')))
except:
self.loger.info(self.mode[i] + '切换后设备断开连接')
self.screenshot(self.mode[i] + '切换后设备断开连接')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")").click()
else:
print(self.mode[i] + '切换后设备连接正常')
self.loger.info(self.mode[i] + '切换后设备连接正常')
else:
print(self.mode[i] + '切换失败')
self.loger.info(self.mode[i] + '切换失败')
sleep(3)
self.start = False
self.loger.info('模式切换[%s]次' % times + ',成功了[%s]次！！！！！！！！' % n)
class DeviceConnectHandle():
def __init__(self, driver, screen_x, screen_y, loger):
global list_diviceType_51, list_diviceMac_51
self.driver = driver
self.myDevice_p = MyDevicePage(driver)
self.cameraSet_p = CameraSetPage(driver)
self.lampSet_p = LampSetPage(driver)
self.calibration = CalibrationPage(driver)
self.lampstandard_p = LampstandardPage(driver)
self.loger = loger
# self.press_keycode_handle = PressKeyCodeHandle(driver)
self.search_scan_handle = Search_Sacn_Device_Handle(driver, loger)
self.wifi_set_handle = WIFISetHandle(driver, screen_x, screen_y, loger)
self.swip = Swip(screen_x, screen_y, driver)
#连接H5183烤肉温度计
def connect_H5183(self):
self.search_scan_handle.chooes_device('H5183')
#连接H5102温湿度计
def coonect_H5102(self):
self.search_scan_handle.chooes_device('H5102')
sleep(2)
#连接H6056，灯柱
def connect_sku6056(self):
# 添加前判断是设备已经添加
sleep(3)
ele = self.myDevice_p.get_tvLamp_element()
self.loger.info('已添加H6056，删除掉')
if ele != None:
sleep(1)
# 删除设备
ele.click()
sleep(1)
self.delete_lempDevice()
# 搜索6056设备型号
self.loger.info('开始添加H6056')
self.search_scan_handle.chooes_device('H6056')
self.search_scan_handle.scan_device('H6056_3142')
sleep(8)
#设置WIFI
# self.wifi_set_handle.set_wifi()
# WIFI设置完成点击完成
ele = WebDriverWait(
self.driver, 30,
0.5).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")"))
if ele:
ele.click()
# else:
# self.loger.info('WIFI连接失败')
#灯柱位置设置
if WebDriverWait(
self.driver, 40,
0.5).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"灯柱位置\")")):
self.loger.info('WIFI连接成功')
ele = self.lampstandard_p.get_iv_switch_1_element()
sleep(1)
ele.click()
sleep(1)
ele.click()
ele2 = self.lampstandard_p.get_iv_switch_2_element()
sleep(1)
ele2.click()
sleep(1)
ele2.click()
ele3 = self.lampstandard_p.get_tv_swap_element()
sleep(1)
ele3.click()
sleep(1)
ele4 = self.lampstandard_p.get_tv_done_element()
sleep(1)
ele4.click()
if WebDriverWait(
self.driver, 40,
0.5).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"H6056_3142\")")):
# self.delete_lempDevice()
return True
else:
return False
else:
self.loger.info('WIFI连接失败')
# 连接H6054灯柱
def connect_sku6054(self):
self.loger.info('开始添加H6054')
# 搜索6199设备型号
self.search_scan_handle.chooes_device('H6054')
# 扫描设备
self.search_scan_handle.scan_device('H6054_3142')
sleep(8)
# 灯柱位置设置
if WebDriverWait(
self.driver, 40,
0.5).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"灯柱位置\")")):
# self.loger.info('WIFI连接成功')
ele = self.lampstandard_p.get_iv_switch_1_element()
sleep(1)
ele.click()
sleep(1)
ele.click()
ele2 = self.lampstandard_p.get_iv_switch_2_element()
sleep(1)
ele2.click()
sleep(1)
ele2.click()
ele3 = self.lampstandard_p.get_tv_swap_element()
sleep(1)
ele3.click()
sleep(1)
ele4 = self.lampstandard_p.get_tv_done_element()
sleep(1)
ele4.click()
# 设置WIFI
# self.wifi_set_handle.set_wifi()
if WebDriverWait(
self.driver, 30,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")")).is_displayed():
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
WebDriverWait(
self.driver, 30,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"准备好了\")")).click()
sleep(2)
# 摄像头安装位置,默认上方
self.cameraSet('up')
# 操作示意图
sleep(1)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"知道了\")").click()
# WebDriverWait(self.driver, 60, 0.5).until(EC.visibility_of_element_located((By.ID,'pic_show')))
# 判断图片是否出现
sleep(2)
self.refresh_picture()
else:
self.loger.info('灯柱位置加载失败')
# 连接H6199TV灯带
def connect_H6199(self, device_name):
sleep(6)
self.loger.info('开始添加H6199')
#搜索6199设备型号
self.search_scan_handle.chooes_device('H6199')
#扫描设备
self.search_scan_handle.scan_device(device_name)
sleep(3)
#设置WIFI
# self.wifi_set_handle.set_wifi()
try:
WebDriverWait(
self.driver, 120,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")")).is_displayed()
except:
self.loger.info('检测摄像头第一次失败')
self.load_fail('检测摄像头第一次失败')
#重试
sleep(1)
ele = self.driver.find_element_by_id('iv_choose')
sleep(1)
ele.click()
sleep(1)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重试\")").click()
try:
WebDriverWait(
self.driver, 120,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")")).is_displayed()
except:
self.loger.info('检测摄像头第二次失败,本次添加结束')
self.load_fail('检测摄像头第二次失败')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"跳过\")").click()
self.delete_lempDevice()
return False
else:
#继续下面操作
result = self.continue_connect(device_name)
return result
else:
# 继续下面操作
result = self.continue_connect(device_name)
return result
#摄像头检测成功后，继续下面操作
def continue_connect(self, device_name):
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
self.loger.info('检测摄像头成功,进入WIFI设置页成功')
#校准设备
if self.device_check():
#摄像头安装位置,默认上方
self.cameraSet('up')
#灯带安装方向,默认顺时针
self.lampSet()
#操作示意图
sleep(2)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"知道了\")").click()
# WebDriverWait(self.driver, 60, 0.5).until(EC.visibility_of_element_located((By.ID,'pic_show')))
#判断图片是否出现
sleep(2)
#如果图片加载成功
if self.check_picture():
#校准：图片位置[58, 356][1382, 1101]
sleep(4)
self.jiaozhun()
self.loger.info('校准')
sleep(4)
#下一步
# WebDriverWait(self.driver, 30, 1).until(EC.element_to_be_clickable((By.ID, 'pic_calibration_done')))
self.driver.find_element_by_id('pic_calibration_done').click()
self.loger.info('下一步')
# WebDriverWait(self.driver, 20, 1).until(EC.element_to_be_clickable((By.ID, 'pic_calibration_done'))).click()
# 提交
sleep(3)
# self.driver.find_element_by_android_uiautomator("new UiSelector().text(\"提交\")").click()
# WebDriverWait(self.driver, 40, 1).until(EC.element_to_be_clickable((By.ID, 'pic_calibration_done')))
self.driver.find_element_by_id('pic_calibration_done').click()
self.loger.info('提交')
if WebDriverWait(self.driver, 40, 1).until(
lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % device_name)
).is_displayed():
#删除设备
self.delete_lempDevice()
self.loger.info('删除设备')
return True
else:
return False
else:
self.loger.info('图片无法加载出来，本次测试结束')
back = self.driver.find_element_by_id('back')
sleep(1)
back.click()
sleep(2)
# 刷新首页
self.swip.swipe_down(600)
WebDriverWait(
self.driver, 40,
1).until(lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % device_name)).click(
)
#删除设备
self.delete_lempDevice()
return False
else:
return False
#删除设备
def delete_lempDevice(self):
sleep(4)
btn_settting = self.driver.find_element_by_id("btn_setting")
sleep(1)
btn_settting.click()
sleep(1)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"删除设备\")").click()
sleep(1)
yes = self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"是\")")
yes.click()
sleep(1)
#刷新首页
self.swip.swipe_down(600)
self.driver.implicitly_wait(5)
def refresh_picture(self):
n = 0
for i in range(100):
if WebDriverWait(self.driver, 60, 1).until(
EC.element_to_be_clickable((By.ID, 'pic_show'))):
# ele2 = self.driver.find_element_by_android_uiautomator("new UiSelector().text(\"刷新\")")
n += 1
print('第[%s]次图片加载成功' % n)
self.loger.info('第' + str(n) + '次图片加载成功')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"刷新\")").click()
else:
print('第[%s]次图片加载失败' % n)
self.loger.info('第' + str(n) + '次图片加载失败')
self.load_fail('第' + str(n) + '次图片加载失败')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"刷新\")").click()
#检查图片
def check_picture(self):
try:
# WebDriverWait(self.driver, 120, 1).until(EC.element_to_be_clickable((By.ID,'pic_calibration_done')))
WebDriverWait(self.driver, 120, 1).until(
EC.element_to_be_clickable((By.ID, 'pic_show')))
except:
print('第一次图片加载失败')
self.loger.info('第一次图片加载失败')
self.load_fail('第一次图片加载失败')
#再次点击刷新
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"刷新\")").click()
try:
WebDriverWait(self.driver, 120, 1).until(
EC.element_to_be_clickable((By.ID, 'pic_show')))
except:
self.loger.info('第二次图片加载失败')
self.load_fail('第二次图片加载失败')
return False
else:
self.loger.info('第二次图片加载成功')
return True
else:
self.loger.info('第一次图片加载成功')
sleep(2)
return True
#加载失败时截图
def load_fail(self, msg):
# 截图保存
now = time.strftime("%Y-%m-%d %H-%M-%S")
image_name = setting.TEST_ERROR_Image + '/' + msg + " " + now + ".png"
self.driver.save_screenshot(image_name)
#校准滑动坐标点
def jiaozhun(self):
#左一
self.swip.swipe_up(70, 58, 500)
#左二
self.swip.swipe_down(90, 400, 1000)
#左四
self.swip.swipe_up(80, 1000, 1100)
#左五
self.swip.swipe_down(90, 1400, 800)
sleep(2)
# toast弹窗检查-wifi连接
def check_toast(self):
# 用于生成xpath定位 相当于 "//*[@text='没有找到用户名或密码']"
toast_message = "设备Wi-Fi连接成功"
message = '//*[@text=\'{}\']'.format(toast_message)
# 获取toast提示框内容
toast_element = WebDriverWait(
self.driver, 30,
0.5).until(lambda x: x.find_element_by_xpath(message))
print(toast_element.text)
# 添加断言
assert toast_element.text == "设备Wi-Fi连接成功"
self.loger.info(toast_element.text)
#灯带安装方向,默认顺时针
def lampSet(self, direction=None):
self.driver.implicitly_wait(5)
if direction == None:
direction = 'right'
if direction == 'right':
lamp_right = self.lampSet_p.get_lampRight_element()
sleep(1)
lamp_right.click()
else:
lamp_left = self.lampSet_p.get_lampLeft_element()
sleep(1)
lamp_left.click()
# 点击确认
sleep(2)
ele = self.lampSet_p.get_done_element()
sleep(1)
ele.click()
sleep(2)
self.loger.info('灯带方向设置成功')
#摄像头安装位置,默认上方
def cameraSet(self, direction=None):
self.driver.implicitly_wait(5)
if direction == None:
direction = 'up'
if direction == 'up':
camera_up = self.cameraSet_p.get_cameraUp_element()
sleep(1)
camera_up.click()
else:
camera_down = self.cameraSet_p.get_cameraDown_element()
sleep(1)
camera_down.click()
#点击确认
sleep(2)
ele = self.cameraSet_p.get_done_element()
sleep(1)
ele.click()
sleep(2)
self.loger.info('摄像头安装位置设置成功')
#校准设备
def device_check(self):
try:
WebDriverWait(
self.driver, 120,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"准备好了\")")).is_displayed()
except:
self.loger.info('WIFI第一次连接失败')
#重新连接
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
try:
WebDriverWait(
self.driver, 120,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"准备好了\")")).is_displayed()
except:
self.loger.info('WIFI第二次连接失败，结束本次配网')
# 跳过
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"跳过\")").click()
sleep(3)
#确认
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"确认\")").click()
self.delete_lempDevice()
return False
else:
# 检查WIFI是否连接成功
self.loger.info('WIFI连接成功')
WebDriverWait(
self.driver, 20,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"准备好了\")")).click()
return True
else:
# 检查WIFI是否连接成功
self.loger.info('WIFI连接成功')
WebDriverWait(
self.driver, 20,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"准备好了\")")).click()
return True
# 连接H5182烤肉温度计
def connect_H5182(self):
self.search_scan_handle.chooes_device('H5182')
sleep(2)
#操作已确认
self.myDevice_p.get_addClick().click()
#查看扫描结果
WebDriverWait(
self.driver, 20,
0.5).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"H5182_2D1B\")")).click()
# 显示等待
ele = WebDriverWait(
self.driver, 20,
0.5).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")"))
if ele != None:
self.loger.info("连接成功")
ele.click()
else:
self.loger.info("连接失败")
print("-----------------点击完成-------------------")
sleep(5)
#self.delete_H5182()
#删除H5182烤肉温度计
def delete_H5182(self):
sleep(8)
ele = self.myDevice_p.get_meat_thermometer()
ele.click()
#进入设置界面
sleep(8)
btn_settting = self.driver.find_element_by_id("btn_setting")
sleep(2)
btn_settting.click()
#滑到底端
sleep(4)
self.swip.swipe_up(800)
sleep(2)
self.swip.swipe_up(800)
sleep(2)
ele4 = self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"删除设备\")")
ele4.click()
sleep(2)
yes = self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"是\")")
yes.click()
sleep(4)
#连接H5103温湿度计
def connect_H5103(self):
self.search_scan_handle.chooes_device('H5103')
sleep(2)
class Thermo_HygrometerBoundHandle():
def __init__(self,driver,loger):
self.driver = driver
self.loger = loger
# 获取屏幕分辨率
self.screen_x = self.driver.get_window_size()['width'] # 屏幕宽度--单位是px
self.screen_y = self.driver.get_window_size()['height'] # 屏幕的高度-单位是px
self.swip = Swip(self.screen_x, self.screen_y, self.driver)
# 截图路径
self.image_path = setting.TEST_ERROR_Image
#测试结果
self.report = setting.TEST_REPORT
#设备配网
def bound_thermo_hygrometer(self,device,times,thermo_hygrometer_list):
#功能线程运行
threading.Thread(target=self.bound,name= 'bound', args=(device,times,thermo_hygrometer_list)).start()
# 进入设备详情页
def enter_device(self,device):
try:
WebDriverWait(self.driver, 120, 1).until(
lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % device)).is_displayed()
except:
self.loger.info('没有找到该设备，无法进入设备详情页')
else:
self.driver.find_element_by_android_uiautomator('new UiSelector().text(\"%s\")' % device).click()
#绑定温湿度计
def bound(self,device,times,thermo_hygrometer_list):
#开始循环绑定
if len(thermo_hygrometer_list) != 0:
# for d in range(len(self.device)):
# 进入设备详情页
self.enter_device(device)
try:
WebDriverWait(self.driver, 30, 0.5).until(
EC.presence_of_element_located((By.ID, 'iv_switch')))
except:
self.loger.info('设备详情页加载失败')
print('设备详情页加载失败')
else:
self.loger.info('设备详情页加载成功')
print('设备详情页加载成功')
sleep(2)
self.swip.swipe_up(600)
sleep(2)
self.swip.swipe_up(600)
try:
WebDriverWait(self.driver, 3, 0.5).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"温度单位""\")")).is_displayed()
except:
# 绑定温湿度计
self.bound_handle(device,times,thermo_hygrometer_list)
else:
self.loger.info('已经添加过了温湿度计，删除掉')
print('已经添加过了温湿度计，删除掉')
# 删除温湿度计设备
self.unbound()
#绑定温湿度计
self.bound_handle(device,times,thermo_hygrometer_list)
# 退出详情页
WebDriverWait(self.driver, 5, 0.1).until(
EC.presence_of_element_located((By.ID, 'btn_back'))).click()
else:
print('温湿度计待测设备为空')
def bound_handle(self,device,times,thermo_hygrometer_list):
now = time.strftime("%Y-%m-%d %H-%M-%S")
# 文件路径
path = os.path.join(self.report, device + "温湿度计绑定兼容性测试" + now + ".xls")
# 创建表格
self.creat_excel(path, device, times, thermo_hygrometer_list)
#开始绑定温湿度计主循环
for t in range(len(thermo_hygrometer_list)):
thermo_hygrometer = thermo_hygrometer_list[t]
f = 0
p = 0
wrt_data = []
wrt_data.append(thermo_hygrometer_list[t])
for i in range(times):
try:
# 开始操作---添加
sleep(1)
self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"绑定温湿度计\")').click()
# 等待
try:
WebDriverWait(self.driver, 20, 0.5).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"%s\")" % thermo_hygrometer)).is_displayed()
except:
self.swip.swipe_up(600)
try:
WebDriverWait(self.driver, 20, 0.5).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"%s\")" % thermo_hygrometer)).is_displayed()
except:
self.loger.info('没有找到这个温湿度计')
print('没有找到这个温湿度计')
else:
# 勾选
self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % thermo_hygrometer).click()
# 确定
WebDriverWait(self.driver, 10, 1).until(
EC.presence_of_element_located((By.ID, 'btn_ok'))).click()
time_start = time.time() # 开始计时
# 上滑
sleep(2)
self.swip.swipe_up(600)
try:
WebDriverWait(self.driver, 300, 0.5).until_not(
EC.presence_of_element_located((By.XPATH, '//*[contains(@text,"连接中")]')))
except:
print('5分钟还一直连接中')
self.screenshot('5分钟还一直连接中')
else:
try:
WebDriverWait(self.driver, 3, 0.5).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"温度单位\")")).is_displayed()
except:
f += 1
self.loger.info('绑定失败')
self.screenshot('绑定失败')
else:
time_end = time.time() # 结束计时
sum_t = time_end - time_start # 运行所花时间
wrt_data.append('{:.2f}'.format(sum_t))
p += 1
print('温湿度计[%s]第[%s]次添加成功，耗时[%s]秒' % (thermo_hygrometer, p, '{:.2f}'.format(sum_t)))
self.loger.info(
'温湿度计[%s]第[%s]次添加成功，耗时[%s]秒' % (thermo_hygrometer, p, '{:.2f}'.format(sum_t)))
# 删除温湿度计设备
self.unbound()
else:
# 勾选
self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % thermo_hygrometer).click()
# 确定
WebDriverWait(self.driver, 10, 1).until(
EC.presence_of_element_located((By.ID, 'btn_ok'))).click()
time_start = time.time() # 开始计时
# 上滑
sleep(2)
self.swip.swipe_up(600)
try:
WebDriverWait(self.driver, 300, 0.5).until_not(
EC.presence_of_element_located((By.XPATH, '//*[contains(@text,"连接中")]')))
except:
print('5分钟还一直连接中')
self.screenshot('5分钟还一直连接中')
else:
try:
WebDriverWait(self.driver, 3, 0.5).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"温度单位\")")).is_displayed()
except:
f += 1
self.loger.info('绑定失败')
self.screenshot('绑定失败')
else:
time_end = time.time() # 结束计时
sum_t = time_end - time_start # 运行所花时间
wrt_data.append('{:.2f}'.format(sum_t))
p += 1
print('温湿度计[%s]第[%s]次添加成功，耗时[%s]秒' % (thermo_hygrometer, p, '{:.2f}'.format(sum_t)))
self.loger.info(
'温湿度计[%s]第[%s]次添加成功，耗时[%s]秒' % (thermo_hygrometer, p, '{:.2f}'.format(sum_t)))
# 删除温湿度计设备
self.unbound()
except Exception as e:
print(e)
continue
print('温湿度计[%s]总共绑定[%s]次，成功[%s]次，失败[%s]次' % (thermo_hygrometer, times, p, f))
self.loger.info('温湿度计[%s]总共绑定[%s]次，成功[%s]次，失败[%s]次' % (thermo_hygrometer, times, p, f))
# 写入数据
self.excel(path, device, t, wrt_data)
# 删除温湿度计
def unbound(self):
try:
WebDriverWait(self.driver, 10, 0.5).until(
EC.presence_of_element_located((By.ID, 'tv_bind_temperature_title'))).click()
WebDriverWait(self.driver, 10, 0.5).until(
EC.presence_of_element_located((By.ID, 'btn_delete'))).click()
WebDriverWait(self.driver, 10, 0.5).until(
EC.presence_of_element_located((By.ID, 'btn_done'))).click()
except Exception as e:
print(e)
#创建表格
def creat_excel(self,path,deviceName,times,thermo_hygrometer_list):
# 创建空表格
columns = []
columns.append('温湿度计设备')
for i in range(times):
columns.append('第' + str(i + 1) + '次绑定')
df = pd.DataFrame(data=np.zeros(shape=(len(thermo_hygrometer_list), (times + 1))), columns=columns)
# 保存数据
# for d in range(len(self.device)):
df.to_excel(path,
sheet_name=deviceName,
index=False,
header=True)
# 写入数据
def excel(self,path,deviceName,row,wrt_data):
data = pd.read_excel(path,
sheet_name=0, # 读取哪⼀个Excel中⼯作表，默认第⼀个
header=0, ) # 使⽤第⼀⾏数据作为列索引
data.loc[row] = wrt_data
pd.DataFrame(data).to_excel(path,
sheet_name=deviceName,
index=False,
header=True)
# 截图
def screenshot(self, msg):
# 截图保存
now = time.strftime("%Y-%m-%d %H-%M-%S")
image_name = self.image_path + '/' + msg + " " + now + ".png"
self.driver.save_screenshot(image_name)
class H6076MainHandle():
dataList = ''
def __init__(self, driver, device, com, bps, timeout, com2, bps2, bytesize,
stopbits, Ret1, Ret2, loger):
self.device = device
self.driver = driver
self.Ret1 = Ret1
self.Ret2 = Ret2
#日志
self.loger = loger
# 获取屏幕分辨率
self.screen_x = self.driver.get_window_size()['width'] # 屏幕宽度--单位是px
self.screen_y = self.driver.get_window_size()['height'] # 屏幕的高度-单位是px
self.swip = Swip(self.screen_x, self.screen_y, self.driver)
#打印串口
self.port = com
self.bps = bps
self.timeout = timeout
self.start = True
#色温
self.color_temp = [0.05, 0.15, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8]
#亮度
self.brightness = [0.2, 0.4, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 0.95]
#灵敏度
self.sensitivity = [0.2, 0.4, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 0.95]
# global Ret1
try:
# 打开串口，并得到串口对象
self.main_engine = serial.Serial(self.port,
self.bps,
timeout=self.timeout)
self.main_engine.flushInput() # 清空缓冲区
# 判断是否打开成功
if (self.main_engine.is_open):
self.Ret1 = True
except Exception as e:
print("---异常---：", e)
#控制串口
self.port2 = com2
self.bps2 = bps2
self.bytesize = bytesize
self.stopbits = stopbits
# global Ret2
try:
# 打开串口，并得到串口对象
self.main_engine2 = serial.Serial(self.port2,
self.bps2,
timeout=self.timeout,
bytesize=self.bytesize,
stopbits=self.stopbits)
# 判断是否打开成功
if (self.main_engine2.is_open):
self.Ret2 = True
#初始化继电器类
self.relay_h = RelayHandle(self.main_engine2)
except Exception as e:
print("---异常---：", e)
#设备配网
def connect_H6076(self, skip_wifi, times):
if (self.Ret1 and self.Ret2):
#功能线程运行
threading.Thread(target=self.add_device, args=(
skip_wifi,
times,
)).start()
#日志线程运行
threading.Thread(target=self.recv, ).start()
else:
print("创建串口失败")
#模式切换
def mode_switch(self, times):
if (self.Ret1 and self.Ret2):
#功能线程运行
threading.Thread(target=self.mode_switch_handle,
args=(times, )).start()
#日志线程运行
threading.Thread(target=self.recv, ).start()
else:
print("创建串口失败")
#开关切换
def on_off_switch(self, times=None):
if (self.Ret1 and self.Ret2):
#功能线程运行
threading.Thread(target=self.on_off_switch_handle,
args=(times, )).start()
#日志线程运行
threading.Thread(target=self.recv, ).start()
else:
print("创建串口失败")
#颜色切换
def color_switch(self, times):
if (self.Ret1 and self.Ret2):
#功能线程运行
threading.Thread(target=self.color_switch_handle,
args=(times, )).start()
#日志线程运行
threading.Thread(target=self.recv, ).start()
else:
print("创建串口失败")
#亮度切换
def brightness_switch(self, times):
if (self.Ret1 and self.Ret2):
#功能线程运行
threading.Thread(target=self.brightness_switch_handle,
args=(times, )).start()
#日志线程运行
threading.Thread(target=self.recv, ).start()
else:
print("创建串口失败")
#灵敏度切换
def sensitivity_switch(self, times):
if (self.Ret1 and self.Ret2):
#功能线程运行
threading.Thread(target=self.sensitivity_switch_handle,
args=(times, )).start()
#日志线程运行
threading.Thread(target=self.recv, ).start()
else:
print("创建串口失败")
# 进入设备详情页
def enter_device(self):
try:
WebDriverWait(
self.driver, 120, 1
).until(lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)).is_displayed()
except:
self.loger.info('没有找到该设备，无法进入设备详情页')
else:
sleep(2)
self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device).click()
#反复进入设备详情页
def enter_out_device_handle(self, times=None):
n = 0
sleep(3)
if times != None:
for i in range(times):
# 开关按钮：iv_switch
sleep(3)
try:
#进入设备主页
self.enter_device()
try:
WebDriverWait(self.driver, 60, 1).until(
EC.element_to_be_clickable((By.ID, 'btn_switch')))
except:
self.loger.info('设备详情页加载失败[%s]' % (i + 1))
print('设备详情页加载失败[%s]' % (i + 1))
else:
n += 1
print('设备详情页加载成功[%s]' % (i + 1))
self.loger.info('设备详情页加载成功[%s]' % (i + 1))
sleep(3)
#退出
self.driver.find_element_by_id('btn_back').click()
except Exception as e:
print(e)
continue
self.loger.info('反复进入设备详情页[%s]次' % times + ',成功[%s]次' % n +
',成功率%s' % (n / times * 100) + '%')
print('反复进入设备详情页[%s]次' % times + ',成功[%s]次' % n + ',成功率%s' %
(n / times * 100) + '%')
print('测试结束')
self.start = False
else:
print('请输入times测试次数')
# 开关切换
def on_off_switch_handle(self, times=None):
#进入设备详情页
self.enter_device()
n = 0
m = 0
sleep(3)
if times != None:
for i in range(times):
# 开关按钮：iv_switch
try:
WebDriverWait(
self.driver, 5, 1
).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"设备已关闭\")")).is_displayed()
except:
self.loger.info('设备当前状态是开，关闭设备')
print('设备当前状态是开，关闭设备')
try:
sleep(2)
self.driver.find_element_by_id('btn_switch').click()
sleep(1)
#蓝牙模式
# result = self.com_bluetooth_normal_log_check(self.dataList,2500,'on_off_switch','330100')
#WiFi模式
result = self.com_bluetooth_normal_log_check(
self.dataList, 490, 'on_off_switch', 'c10d0000')
if result:
n += 1
self.loger.info('设备关成功[%s]次' % n)
print('设备关成功[%s]次' % n)
sleep(2)
else:
self.loger.info('设备关失败')
print('设备关失败')
sleep(2)
except Exception as e:
print(e)
continue
else:
print('设备当前状态是关，打开设备')
self.loger.info('设备当前状态是关，打开设备')
try:
sleep(2)
self.driver.find_element_by_id('btn_switch').click()
sleep(1)
# 蓝牙模式
# result = self.com_bluetooth_normal_log_check(self.dataList,2500,'on_off_switch','330100')
# WiFi模式
result = self.com_bluetooth_normal_log_check(
self.dataList, 490, 'on_off_switch', 'c10d0001')
if result:
m += 1
self.loger.info('设备开成功[%s]次' % m)
print('设备开成功[%s]次' % m)
sleep(2)
else:
self.loger.info('设备开失败')
print('设备开失败')
sleep(2)
except Exception as e:
print(e)
continue
self.loger.info('设备开%s次' % format(times / 2, '.0f') +
',成功%s次' % n +
',成功率%s' % format(n /
(times / 2) * 100, '.2f') + '%')
print('设备开%s次' % format(times / 2, '.0f') + ',成功%s次' % n +
',成功率%s' % format(n / (times / 2) * 100, '.2f') + '%')
self.loger.info('设备关%s次' % format(times / 2, '.0f') +
',成功%s次' % n +
',成功率%s' % format(n /
(times / 2) * 100, '.2f') + '%')
print('设备关%s次' % format(times / 2, '.0f') + ',成功%s次' % n +
',成功率%s' % format(n / (times / 2) * 100, '.2f') + '%')
print('测试结束')
self.start = False
else:
print('请输入times测试次数')
#颜色切换
def color_switch_handle(self, times):
# 进入设备详情页
self.enter_device()
n = 0
m = 0
q = 0
p = 0
try:
WebDriverWait(
self.driver, 60,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"场景\")")).is_displayed()
except:
print('设备详情页加载失败')
else:
#切换到颜色模式
sleep(3)
try:
self.driver.find_element_by_id('mode_2_icon').click()
except Exception as e:
print(e)
sleep(3)
# 上滑到颜色
self.swip.swipe_up(800)
sleep(2)
self.swip.swipe_up(800)
#色温滑动条
ele = self.driver.find_element_by_id('color_tem_seekbar')
# 点击全选
self.driver.find_element_by_id('select_all').click()
sleep(1)
#点击取消全选
self.driver.find_element_by_id('select_all').click()
sleep(1)
if times != None:
for i in range(times):
for j in range(7):
#选择颜色分段
self.driver.find_element_by_id('checkbox_bulb%s' %
(j + 1)).click()
sleep(1)
#点击颜色
self.driver.find_element_by_id('color_%s' %
(j + 1)).click()
sleep(1)
#校验串口日志
check_com_result = self.com_bluetooth_normal_log_check(
self.dataList, 420, 'color_switch', '330500')
if check_com_result:
n += 1
self.loger.info('第[%s]次颜色切换成功' % n)
print('第[%s]次颜色切换成功' % n)
else:
m += 1
self.loger.info('第[%s]次颜色切换失败' % m)
print('第[%s]次颜色切换失败' % m)
sleep(3)
#色温切换
self.move_seekBar(ele, self.color_temp[j])
sleep(1)
#判断串口日志
check_com_result_2 = self.com_bluetooth_normal_log_check(
self.dataList, 420, 'color_switch', '330500')
if check_com_result_2:
p += 1
self.loger.info('第[%s]次色温切换成功' % p)
print('第[%s]次色温切换成功' % p)
else:
q += 1
self.loger.info('第[%s]次色温切换失败' % q)
print('第[%s]次色温切换失败' % q)
#切换一次等三秒
sleep(3)
# 点击取消全选
self.driver.find_element_by_id('select_all').click()
sleep(1)
self.loger.info('颜色切换总共:%s次' % (times * 7) + ',成功:%s次' % n +
',失败:%s次' % m + ',成功率：%s' %
(n / (times * 7) * 100) + '%')
print('颜色切换总共:%s次' % (times * 7) + ',成功:%s次' % n +
',失败:%s次' % m + ',成功率：%s' % (n /
(times * 7) * 100) + '%')
self.loger.info('色温切换总共:%s次' % (times * 7) + ',成功:%s次' % p +
',失败:%s次' % q + ',成功率：%s' %
(p / (times * 7) * 100) + '%')
print('色温切换总共:%s次' % (times * 7) + ',成功:%s次' % p +
',失败:%s次' % q + ',成功率：%s' % (p /
(times * 7) * 100) + '%')
print('测试结束')
self.start = False
#亮度切换
def brightness_switch_handle(self, times):
n = 0
m = 0
# 进入设备详情页
self.enter_device()
try:
WebDriverWait(
self.driver, 60,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"场景\")")).is_displayed()
except:
print('设备详情页加载失败')
else:
sleep(3)
# 亮度滑动条
ele = self.driver.find_element_by_id('brightness_progress')
if times != None:
for i in range(times):
for j in range(9):
# 亮度切换
try:
self.move_seekBar(ele, self.brightness[j])
sleep(3)
#串口检测
check_com_result = self.com_bluetooth_normal_log_check(
self.dataList, 180, 'brightness',
'550102000000c2')
if check_com_result:
n += 1
self.loger.info('第[%s]次亮度切换成功' % n)
print('第[%s]次亮度切换成功' % n)
else:
m += 1
self.loger.info('第[%s]次亮度切换失败' % m)
print('第[%s]次亮度切换失败' % m)
except Exception as e:
print(e)
continue
sleep(2)
self.loger.info('亮度切换总共:%s次' % (times * 9) + ',成功:%s次' % n +
',失败:%s次' % m + ',成功率：%s' %
(n / (times * 9) * 100) + '%')
print('亮度切换总共:%s次' % (times * 9) + ',成功:%s次' % n +
',失败:%s次' % m + ',成功率：%s' % (n /
(times * 9) * 100) + '%')
print('测试结束')
self.start = False
#灵敏度切换
def sensitivity_switch_handle(self, times):
n = 0
m = 0
# 进入设备详情页
self.enter_device()
try:
WebDriverWait(
self.driver, 60,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"场景\")")).is_displayed()
except:
print('设备详情页加载失败')
else:
sleep(3)
#切换到颜色场景
self.driver.find_element_by_id('mode_1_icon').click()
sleep(3)
# 上滑到灵敏度
self.swip.swipe_up(600)
sleep(2)
# 灵敏度滑动条
ele = self.driver.find_element_by_id('sensitivity_progress')
if times != None:
for i in range(times):
for j in range(9):
# 亮度切换
try:
self.move_seekBar(ele, self.sensitivity[j])
sleep(3)
# 串口检测
check_com_result = self.com_bluetooth_normal_log_check(
self.dataList, 410, 'sensitivity', '330500')
if check_com_result:
n += 1
self.loger.info('第[%s]次灵敏度切换成功' % n)
print('第[%s]次灵敏度切换成功' % n)
else:
m += 1
self.loger.info('第[%s]次灵敏度切换失败' % m)
print('第[%s]次灵敏度切换失败' % m)
except Exception as e:
print(e)
continue
sleep(2)
self.loger.info('灵敏度切换总共:%s次' % (times * 9) + ',成功:%s次' % n +
',失败:%s次' % m + ',成功率：%s' %
(n / (times * 9) * 100) + '%')
print('灵敏度切换总共:%s次' % (times * 9) + ',成功:%s次' % n +
',失败:%s次' % m + ',成功率：%s' % (n /
(times * 9) * 100) + '%')
print('测试结束')
self.start = False
#场景切换
def mode_switch_handle(self, times):
self.enter_device()
sleep(5)
n = 0
# 开关按钮：iv_switch
try:
WebDriverWait(
self.driver, 5,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"设备已关闭\")")).is_displayed()
except:
self.loger.info('设备当前状态是开')
print('设备当前状态是开')
else:
print('设备当前状态是关，打开设备')
self.loger.info('设备当前状态是关，打开设备')
try:
sleep(2)
self.driver.find_element_by_id('btn_switch').click()
sleep(1)
except Exception as e:
print(e)
try:
WebDriverWait(
self.driver, 60,
1).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"场景\")")).is_displayed()
except:
print('设备详情页加载失败')
else:
for i in range(times):
sleep(4)
# 音乐模式
try:
try:
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"音乐\")")).is_displayed(
)
except Exception as e:
print(e)
except:
self.loger.info('蓝牙连接失败')
self.screenshot('蓝牙连接失败')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")").click()
else:
sleep(2)
try:
self.driver.find_element_by_id('mode_1_icon').click()
except Exception as e:
print(e)
continue
sleep(1)
#检测串口日志
check_com_result = self.com_bluetooth_normal_log_check(
self.dataList, 300, 'mode_switch')
if check_com_result:
n += 1
if self.check_ble_status():
self.loger.info('切换音乐模式后，蓝牙连接正常')
else:
self.loger.info('切换音乐模式后，蓝牙断连')
self.screenshot('切换音乐模式后，蓝牙断连')
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")")).click()
sleep(3)
# 颜色模式
try:
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"颜色\")")).is_displayed()
except:
self.loger.info('蓝牙连接失败')
self.screenshot('蓝牙连接失败')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")").click()
else:
try:
self.driver.find_element_by_id('mode_2_icon').click()
except Exception as e:
print(e)
continue
# 检测串口日志
sleep(2)
check_com_result = self.com_bluetooth_normal_log_check(
self.dataList, 1140, 'mode_switch')
if check_com_result:
n += 1
if self.check_ble_status():
self.loger.info('切换颜色模式后，蓝牙连接正常')
else:
self.loger.info('切换颜色模式后，蓝牙断连')
self.screenshot('切换颜色模式后，蓝牙断连')
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")")).click()
sleep(3)
# 场景模式
try:
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"场景\")")).is_displayed()
except:
self.loger.info('蓝牙连接失败')
self.screenshot('蓝牙连接失败')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")").click()
else:
try:
self.driver.find_element_by_id('mode_3_icon').click()
except Exception as e:
print(e)
continue
sleep(2)
# 检测串口日志
check_com_result = self.com_bluetooth_normal_log_check(
self.dataList, 200, 'mode_switch')
if check_com_result:
n += 1
if self.check_ble_status():
self.loger.info('切换场景模式后，蓝牙连接正常')
else:
self.loger.info('切换场景模式后，蓝牙断连')
self.screenshot('切换场景模式后，蓝牙断连')
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")")).click()
# DIY模式
sleep(3)
try:
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"DIY\")")).is_displayed()
except:
self.loger.info('蓝牙连接失败')
self.screenshot('蓝牙连接失败')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")").click()
else:
try:
self.driver.find_element_by_id('mode_4_icon').click()
except Exception as e:
print(e)
continue
sleep(2)
# 检测串口日志
check_com_result = self.com_bluetooth_normal_log_check(
self.dataList, 666, 'mode_switch')
if check_com_result:
n += 1
if self.check_ble_status():
self.loger.info('切换DIY模式后，蓝牙连接正常')
# self.loger.info('----------------------------------')
else:
self.loger.info('切换DIY模式后，蓝牙断连')
self.screenshot('切换DIY模式后，蓝牙断连')
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新连接\")")).click()
self.loger.info('第[%s]次循环结束' % (i + 1))
print('第[%s]次循环结束' % (i + 1))
self.start = False
self.loger.info('模式切换共[%s]次' % (times * 4) + ',成功了[%s]次' % n)
print('模式切换共[%s]次' % (times * 4) + ',成功了[%s]次' % n)
#检查蓝牙状态
def check_ble_status(self):
try:
WebDriverWait(
self.driver, 5,
0.5).until(lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"已连接\")")).is_displayed()
except:
return False
else:
return True
#滑动温度进度条
def move_seekBar(self, element, percent):
# 精度不是很准确，需自己调，当percent为1时可能不会移动到100%，可以尝试1.5或2
# 获取拖动条的宽
width = element.size.get("width")
# 获取坐标
x = element.location.get("x")
y = element.location.get("y")
self.driver.swipe(int(width * 0.95 + x), y, int((width + x) * percent),
y, 3000)
# 选择要添加的设备类型
def chooes_device(self):
# 点击+号
WebDriverWait(self.driver, 60,
1).until(EC.element_to_be_clickable(
(By.ID, 'iv_add'))).click()
sleep(3)
self.loger.info('开始添加设备')
# 点击搜索
WebDriverWait(self.driver, 30,
1).until(EC.element_to_be_clickable(
(By.ID, 'tv_search'))).click()
sleep(2)
# 切换输入法，方便后续调用输入法的搜索按钮
self.driver.activate_ime_engine(
'com.sec.android.inputmethod/.SamsungKeypad')
# 搜索框输入device_type
self.driver.press_keycode(13)
sleep(0.5)
self.driver.press_keycode(7)
sleep(0.5)
self.driver.press_keycode(14)
sleep(0.5)
self.driver.press_keycode(13)
WebDriverWait(self.driver, 30,
1).until(EC.element_to_be_clickable(
(By.ID, 'sku_icon'))).click()
#设备配网
#1、次数 2、是否跳过WiFi设置
def add_device(self, skip_wifi, times):
n = 0 # 成功次数
m = 0 # 配网执行次数
k = 0 # WiFi列表加载失败次数
app_check = False
com_check = False
for i in range(times):
# 选择设备类型
try:
self.chooes_device()
m += 1
while True:
try:
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)
).is_displayed()
except:
self.loger.info('蓝牙扫描失败，重新扫描')
self.screenshot('蓝牙扫描失败')
try:
WebDriverWait(
self.driver, 60,
1).until(lambda x: x.
find_element_by_android_uiautomator(
"new UiSelector().text(\"重新扫描\")")
).is_displayed()
except:
self.loger.info('重新扫描按钮不可点击')
else:
self.loger.info('点击重新扫描按钮')
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"重新扫描\")").click()
else:
self.loger.info('蓝牙扫描成功')
sleep(3)
ele = self.driver.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)
sleep(1)
ele.click()
break
# 进入配对界面，点击设备开关按键
try:
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"配对\")")).is_displayed()
except:
self.loger.info('进入蓝牙配对界面失败')
else:
sleep(2)
# 设备按键
self.relay_h.once_click()
# 蓝牙连接成功，点击完成
try:
WebDriverWait(self.driver, 120, 1).until(
lambda x: x.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")")).is_displayed(
)
except:
self.loger.info('蓝牙配对超时')
self.screenshot('蓝牙配对超时')
else:
self.loger.info('蓝牙配对成功')
# 点击完成
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
# 进入WiFi配置界面
sleep(2)
try:
WebDriverWait(
self.driver, 120,
1).until(lambda x: x.
find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")")
).is_displayed()
except:
self.loger.info('wifi设置页面加载失败')
self.screenshot('wifi设置页面加载失败')
# 跳过WiFi设置
self.skip_wifiSetting()
# 删除设备
self.delete_lempDevice()
else:
self.loger.info('wifi设置页面加载成功')
self.screenshot('wifi设置页面加载成功')
# 是否跳过WiFi设置
if skip_wifi:
self.loger.info('跳过WiFi设置')
# 跳过WiFi设置
self.skip_wifiSetting()
# 判断设备是否添加成功
try:
WebDriverWait(self.driver, 60, 1).until(
lambda x: x.
find_element_by_android_uiautomator(
"new UiSelector().text(\"场景\")"
)).is_displayed()
except:
print('添加设备失败')
self.loger.info('添加设备失败')
else:
n += 1
print('第[%s]次添加设备成功' % n)
self.loger.info('第[%s]次添加设备成功' % n)
# 删除设备
self.delete_lempDevice()
else:
sleep(2)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"完成\")").click()
# 校验配网串口日志，等4秒
# sleep(1)
check_result_2 = self.com_bluetooth_adddevice_log_check(
self.dataList)
# 判断设备是否配网成功
try:
WebDriverWait(self.driver, 180, 0.1).until(
EC.presence_of_element_located(
(By.XPATH,
'//*[contains(@text,"连接成功")]')))
except:
self.loger.info('APP端Toast提示失败')
print('APP端Toast提示失败')
self.loger.info('设备配网失败')
print('设备配网失败')
# 删除设备
self.delete_lempDevice()
else:
self.loger.info('APP端Toast提示成功')
print('APP端Toast提示成功')
if check_result_2:
n += 1
self.loger.info('第[%s]次设备配网成功' % n)
print('第[%s]次设备配网成功' % n)
else:
self.loger.info('第[%s]次设备配网失败' % n)
print('第[%s]次设备配网失败' % n)
# 删除设备
self.delete_lempDevice()
except Exception as e:
print(e)
continue
self.start = False
self.loger.info('[%s]' % self.device + '设备配网[%s]次，' % m +
'成功了[%s]次，' % n + '配网成功率%s' % (n / m * 100) + '%')
print('[%s]' % self.device + '设备配网[%s]次，' % m + '成功了[%s]次，' % n +
'配网成功率%s' % (n / m * 100) + '%')
self.loger.info('wifi设置页面加载失败次数：%s' % k)
print('wifi设置页面加载失败次数：%s' % k)
#删除设备
def delete_lempDevice(self):
sleep(4)
btn_settting = self.driver.find_element_by_id("btn_setting")
sleep(1)
btn_settting.click()
sleep(2)
#向下滑动
self.swip.swipe_up(600)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"删除设备\")").click()
sleep(1)
yes = self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"是\")")
yes.click()
sleep(1)
#刷新首页
self.swip.swipe_down(600)
try:
WebDriverWait(
self.driver, 5, 1
).until(lambda x: x.find_element_by_android_uiautomator(
'new UiSelector().text(\"%s\")' % self.device)).is_displayed()
except:
self.loger.info('删除设备成功')
self.loger.info(
'分割线--------------------------------------------------分割线')
else:
self.loger.info('删除设备失败')
#跳过WiFi设置
def skip_wifiSetting(self):
sleep(2)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"跳过\")").click()
sleep(2)
self.driver.find_element_by_android_uiautomator(
"new UiSelector().text(\"确认\")").click()
# 监测蓝牙配对日志
def com_bluetooth_adddevice_log_check(self, dataList):
start = len(dataList) - 2500
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 50) # 以冒号进行分割
# 打印串口日志
self.loger.info('配网日志：' + str(strlist))
print('配网日志：' + str(strlist))
sl = '33b200'
if str(strlist).find(sl) >= 0:
self.loger.info('本次配网日志校验成功')
print('本次配网日志校验成功')
return True
else:
print('本次配网日志校验失败')
self.loger.info('本次配网日志校验失败')
return False
#监测蓝牙控制日志
def com_bluetooth_normal_log_check(self,
dataList,
mlen,
option_type,
sl=None):
start = len(dataList) - mlen
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 50) # 以冒号进行分割
#打印串口日志
self.loger.info('本次操作后蓝牙日志：' + str(strlist))
print('本次操作后蓝牙日志：' + str(strlist))
if option_type == 'mode_switch':
for i in range(len(strlist)):
sl = strlist[i][len(strlist[i]) - 7:len(strlist[i])]
if sl == 'blesend':
print('blesend:' + strlist[i + 1])
self.loger.info('蓝牙回复结果：blesend:' + str(strlist[i + 1]))
if strlist[i + 1][0] == '3' and strlist[
i + 1][4] == '0' and strlist[i + 1][5] == '0':
self.loger.info('本次蓝牙下操作成功')
print('本次蓝牙下操作成功')
return True
else:
self.loger.info('本次蓝牙下操作失败')
print('本次蓝牙下操作失败')
return False
else:
check = False
for i in range(len(strlist)):
if str(strlist[i]).find(sl) >= 0:
self.loger.info(strlist[i])
print(strlist[i])
check = True
break
else:
check = False
return check
#监测普通WiFi日志
def com_wifi_normal_log_check(self, dataList, sl, option_type):
if option_type == 'on_off_switch':
start = len(dataList) - 3400
elif option_type == 'leve_switch':
start = len(dataList) - 1400
else:
start = len(dataList) - 2200
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 50) # 以冒号进行分割
# 打印串口日志
self.loger.info('本次操作后日志：' + str(strlist))
for i in range(len(strlist)):
if strlist[i].find(sl) >= 0:
print('串口日志：' + strlist[i])
self.loger.info('串口日志：' + strlist[i])
return strlist[i]
# 监测WiFi配网日志
def com_wifi_adddevice_log_check(self, dataList):
start = len(dataList) - 8000
end = len(dataList)
str1 = dataList[start:end]
str2 = str1.replace(" ", "").replace("\r",
"").replace("\n",
"") # 去掉空格、回车符、换行符
strlist = str2.split(':', 80) # 以冒号进行分割
# 打印串口日志
self.loger.info('wifi联网日志：' + str(strlist))
print('wifi联网日志：' + str(strlist))
sl = 'IOT_BLE_WIFI_CONNECT_SUC'
if str(strlist).find(sl) >= 0:
print('本次WiFi连接成功')
return True
else:
print('本次WiFi连接失败')
return False
# 接收串口数据
def recv(self):
if self.start:
print("开始接收数据：")
else:
print("测试完毕，停止接收数据：")
while self.start:
try:
count = self.main_engine.inWaiting() # 获取串口缓冲区数据
if count != 0:
data = self.main_engine.read(
self.main_engine.in_waiting).decode(
"gbk") # 读出串口数据，数据采用gbk编码
# print(time.strftime("%Y-%m-%d %H-%M-%S"), " --- recv --> ") # 打印一下子
time.sleep(0.1) # 延时0.1秒，免得CPU出问题
self.dataList += data
except Exception as e:
print("异常报错：", e)
# 截图
def screenshot(self, msg):
# 截图保存
now = time.strftime("%Y-%m-%d %H-%M-%S")
image_name = LOG_DIR + '/' + msg + " " + now + ".png"
self.driver.save_screenshot(image_name)
#
#
# if __name__ == '__main__':
# platformVersion = '10' #安卓系统版本
# mobileName = 'R58M36MWZ1B' #手机名称
# device = 'H7130_C583' #设备名称
# times = 100 #测试次数
# Ret1 = False #日志打印串口是否创建成功标志
# Ret2 = False #控制串口是否创建成功标志
# com1 = 'com13'
# bps = 115200
# timeout = 0.5
# com2 = "com12"
# bps2 = 9600
# timex = 0.5
# bytesize = 8
# stopbits = 1
# ms = Humidifier2(platformVersion,mobileName,device,com1, bps, timeout,com2,bps2,bytesize,stopbits)
# if(Ret1 and Ret2):
# #功能线程运行
# # threading.Thread(target=ms.add_device,args=(times,)).start()
# # threading.Thread(target=ms.leve_switch, args=(times,)).start()
# threading.Thread(target=ms.on_off_switch, args=(times,)).start()
# #日志线程运行
# threading.Thread(target=ms.recv,).start()
# # ms.add_device(times)
# else:
# print("创建串口失败")